File geoip-asn-csv-to-dat.cpp of Package GeoIP.14510
/* geoip-csv-to-dat - convert a country database from CSV to GeoIP binary format
*
* Copyright (c) 2009 Kalle Olavi Niemitalo.
* Copyright (c) 2011 Patrick Matthäi
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#define _GNU_SOURCE 1
#include <algorithm>
#include <arpa/inet.h>
#include <cerrno>
#include <cstdio>
#include <cstdlib>
#include <cstring>
#include <error.h>
#include <fstream>
#include <getopt.h>
#include <iostream>
#include <queue>
#include <set>
#include <stack>
#include <string>
#include <sys/socket.h>
#include <sys/types.h>
#include <sysexits.h>
#include <vector>
#include <GeoIP.h>
#include <map>
// Format of GeoIP Country database files
// ======================================
//
// 1. Binary trie mapping IP addresses to countries.
// 2. Optional unused data.
// 3. Optional database-info block.
// 4. Optional structure-info block.
//
// Binary trie
// -----------
//
// The trie treats IP addresses as bit sequences and maps them to
// numbers. In the country database, each such number is 0xFFFF00 +
// the the country ID that GeoIP_id_by_ipnum() would return. The
// meanings of country IDs are hardcoded in libGeoIP and cannot be
// overridden by the database.
//
// The root node of the trie is at the beginning of the file, and the
// other nodes then follow it. Each node has the same size and
// consists of two little-endian pointers that correspond to the two
// possible values of a bit. In the country database, the pointers are
// 24-bit, and each node is thus 6 bytes long.
//
// Each pointer is one of:
// - The number that the whole lookup should return, i.e. 0xFFFF00 + id
// in the country database.
// - The number of the node that should be examined next, counting from
// 0 at the beginning of the file. Pointing back to nodes with
// smaller numbers is allowed, but loops are not allowed.
//
// Optional unused data
// --------------------
//
// The file format seems to permit extra data between the binary trie
// and the optional blocks.
//
// Optional database-info block
// ----------------------------
//
// Near the end of the file, there may be a three-byte tag (0x00 0x00
// 0x00) followed by at most DATABASE_INFO_MAX_SIZE - 1 = 99 bytes of
// text that describes the database. GeoIP_database_info() returns
// this text and appends a terminating '\0'.
//
// The GeoLite Country IPv4 database downloadable from MaxMind
// includes this database-info block.
//
// Optional structure-info block
// -----------------------------
//
// At the very end of the file, there may be a three-byte tag (0xFF
// 0xFF 0xFF) followed by at most STRUCTURE_INFO_MAX_SIZE - 1 = 19
// bytes. The first byte is the database type,
// e.g. GEOIP_COUNTRY_EDITION = 1 or GEOIP_COUNTRY_EDITION_V6 = 12,
// possibly with 105 added to it. Type-specific information then
// follows. There is no type-specific information for the country
// editions.
//
// The GeoLite Country IPv4 database downloadable from MaxMind does
// not include this structure-info block.
namespace {
class binary_trie
{
public:
typedef uint_fast32_t edge_type;
explicit binary_trie(edge_type leaf);
void set_range(
const uint8_t range_min[],
const uint8_t range_max[],
std::size_t bit_count,
edge_type leaf);
void reorder_depth_first();
void reorder_in_blocks(std::size_t bytes_per_block);
void write_binary(std::ostream &dat_stream) const;
void write_segment(std::ostream &dat_stream) const;
void update_records();
private:
struct node
{
edge_type edges[2];
};
std::vector<node> nodes;
// This could be std::vector<bool> but that seems slower.
typedef std::vector<uint8_t> bits_vector;
void set_range_in_node(
const bits_vector *min_bits,
const bits_vector *max_bits,
std::size_t bit_pos,
edge_type edit_node,
edge_type leaf);
void set_range_in_edge(
const bits_vector *min_bits,
const bits_vector *max_bits,
std::size_t bit_pos,
edge_type edit_node,
bool bit,
edge_type leaf);
void reorder(
const std::vector<edge_type> &old_to_new,
const std::vector<edge_type> &new_to_old);
};
}
/** Construct a binary trie and its root node.
*
* \param leaf
* Both edges of the root node will initially point to this leaf.
* The caller should provide a value that means nothing was found. */
binary_trie::binary_trie(edge_type leaf)
{
const node node = {{ leaf, leaf }};
nodes.push_back(node);
}
/** Edit the trie so it maps a range of bit sequences to the same
* leaf.
*
* \param range_min
* The first bit sequence in the range. Eight bits are packed in each
* byte. The most significant bit of the whole sequence is in the
* most significant bit of the first byte.
*
* \param range_max
* The last bit sequence in the range.
*
* \param bit_count
* The number of bits in both sequences.
*
* \param leaf
* The leaf to which all the bit sequences in the range should be
* mapped. */
void
binary_trie::set_range(
const uint8_t range_min[],
const uint8_t range_max[],
std::size_t bit_count,
edge_type leaf)
{
bits_vector min_bits(bit_count);
bits_vector max_bits(bit_count);
for (std::size_t i = 0; i < bit_count; ++i) {
std::size_t byte_pos = i / 8;
uint8_t mask = 1 << ((~i) % 8);
min_bits[i] = ((range_min[byte_pos] & mask) != 0);
max_bits[i] = ((range_max[byte_pos] & mask) != 0);
}
set_range_in_node(&min_bits, &max_bits, 0, 0, leaf);
}
/** Edit a node in the trie so it maps a range of bit sequences to the
* same leaf.
*
* \param min_bits
* The first bit sequence in the range, or NULL if unbounded.
*
* \param max_bits
* The last bit sequence in the range, or NULL if unbounded.
*
* \param bit_pos
* Which bit in the sequences corresponds to \a edit_node.
*
* \param edit_node
* The node to be modified.
*
* \param leaf
* The leaf to which all the bit sequences in the range should be
* mapped. */
void
binary_trie::set_range_in_node(
const bits_vector *min_bits,
const bits_vector *max_bits,
std::size_t bit_pos,
edge_type edit_node,
edge_type leaf)
{
if (!min_bits || (*min_bits)[bit_pos] == false) {
set_range_in_edge(min_bits,
(max_bits && (*max_bits)[bit_pos] == false)
? max_bits : NULL,
bit_pos + 1, edit_node, false, leaf);
}
if (!max_bits || (*max_bits)[bit_pos] == true) {
set_range_in_edge((min_bits && (*min_bits)[bit_pos] == true)
? min_bits : NULL,
max_bits,
bit_pos + 1, edit_node, true, leaf);
}
}
/** Edit an edge in the trie so it maps a range of bit sequences to
* the same leaf.
*
* \param min_bits
* The first bit sequence in the range, or NULL if unbounded.
*
* \param max_bits
* The last bit sequence in the range, or NULL if unbounded.
*
* \param bit_pos
* Which bit in the sequences corresponds to \a bit.
*
* \param edit_node
* The node in which the edge to be modified is located.
*
* \param bit
* Which edge of \a edit_node should be modified.
*
* \param leaf
* The leaf to which all the bit sequences in the range should be
* mapped. */
void
binary_trie::set_range_in_edge(
const bits_vector *min_bits,
const bits_vector *max_bits,
std::size_t bit_pos,
edge_type edit_node,
bool bit,
edge_type leaf)
{
// Check if the range fills this edge entirely.
bool entire = true;
if (min_bits
&& std::find(min_bits->begin() + bit_pos, min_bits->end(),
true) != min_bits->end())
entire = false;
if (max_bits
&& std::find(max_bits->begin() + bit_pos, max_bits->end(),
false) != max_bits->end())
entire = false;
if (entire) {
nodes[edit_node].edges[bit] = leaf;
} else {
edge_type next = nodes[edit_node].edges[bit];
if (next >= nodes.size()) {
const node new_node = {{ next, next }};
next = nodes.size();
nodes.push_back(new_node);
nodes[edit_node].edges[bit] = next;
}
set_range_in_node(min_bits, max_bits, bit_pos,
next, leaf);
}
}
/** Renumber the nodes in depth-first order. */
void
binary_trie::reorder_depth_first()
{
std::vector<edge_type> old_to_new, new_to_old;
std::stack<edge_type> depth_first;
old_to_new.resize(nodes.size(), -1);
new_to_old.reserve(nodes.size());
depth_first.push(0);
while (!depth_first.empty()) {
const edge_type edge = depth_first.top();
depth_first.pop();
if (edge < nodes.size()) {
old_to_new[edge] = new_to_old.size();
new_to_old.push_back(edge);
depth_first.push(nodes[edge].edges[1]);
depth_first.push(nodes[edge].edges[0]);
}
}
reorder(old_to_new, new_to_old);
}
/** Renumber the nodes to make lookups use CPU and disk caches more
* effectively.
*
* First group the nodes into blocks so that each block contains the
* root of a subtrie and as many levels of its descendants as will
* fit. This way, after the root is paged in, the next few lookup
* steps need not page in anything else. Then, sort the nodes of each
* block in depth-first order. That should give each lookup almost
* 1/2 chance to find the next node immediately adjacent.
*
* With a block size of 1024 bytes, this renumbering reduces the time
* required for random lookups by about 1.1%, compared to a plain
* depth-first order. However, it's still 2.3% slower than the
* database optimized by MaxMind. */
void
binary_trie::reorder_in_blocks(
std::size_t bytes_per_block)
{
const edge_type none = -1;
std::vector<edge_type> old_to_new, new_to_old;
ssize_t bytes_left = bytes_per_block;
old_to_new.resize(nodes.size(), none);
new_to_old.reserve(nodes.size());
for (edge_type subtrie = 0; subtrie < nodes.size(); ++subtrie) {
// If subtrie has already been added to the output,
// ignore it.
if (old_to_new[subtrie] != none)
continue;
// Walk breadth-first from subtrie until we have a
// block full of nodes or the subtrie runs out. Don't
// add these nodes immediately to the output, however.
// Instead just list them in nodes_in_block.
std::set<edge_type> nodes_in_block;
std::queue<edge_type> breadth_first;
breadth_first.push(subtrie);
if (bytes_left <= 0)
bytes_left += bytes_per_block;
while (bytes_left > 0 && !breadth_first.empty()) {
edge_type edge = breadth_first.front();
breadth_first.pop();
if (edge >= nodes.size())
continue;
// Let the last node of the block straddle the
// block boundary. That's better than making
// the hotter first node do so.
bytes_left -= 6;
nodes_in_block.insert(edge);
breadth_first.push(nodes[edge].edges[0]);
breadth_first.push(nodes[edge].edges[1]);
}
// Add the nodes from nodes_in_block to the output in
// depth-first order. This assumes they are all
// reachable from subtrie.
std::stack<edge_type> depth_first;
depth_first.push(subtrie);
while (!depth_first.empty()) {
edge_type edge = depth_first.top();
depth_first.pop();
if (nodes_in_block.find(edge)
== nodes_in_block.end())
continue;
old_to_new[edge] = new_to_old.size();
new_to_old.push_back(edge);
depth_first.push(nodes[edge].edges[1]);
depth_first.push(nodes[edge].edges[0]);
}
}
reorder(old_to_new, new_to_old);
}
void
binary_trie::reorder(
const std::vector<edge_type> &old_to_new,
const std::vector<edge_type> &new_to_old)
{
std::vector<node> new_nodes;
new_nodes.reserve(new_to_old.size());
for (std::vector<edge_type>::const_iterator
it = new_to_old.begin();
it != new_to_old.end(); ++it) {
node new_node;
for (int bit = 0; bit <= 1; ++bit) {
edge_type old_edge = nodes[*it].edges[bit];
if (old_edge < nodes.size())
new_node.edges[bit] = old_to_new[old_edge];
else
new_node.edges[bit] = old_edge;
}
new_nodes.push_back(new_node);
}
swap(new_nodes, nodes);
}
/** Add the size of the trie (number of nodes) to data records*/
void
binary_trie::update_records()
{
for (std::vector<node>::iterator it = nodes.begin();
it != nodes.end(); ++it) {
// previously, we commandeered the MSB in order to indicate which records
// were data records, rather than pointers to other nodes in the trie.
// Here, we remove that bit, and increment the record by the number of nodes,
// because this is how libGeoIP determines whether a node points to an entry
// inside the data section or another node.
for (int i = 0;i<1;++i) {
if (it->edges[i] & 0x80000000) // msb means data record pointer
{
it->edges[i] = (it->edges[i] & 0x7FFFFFFF) + nodes.size();
}
}
}
}
/** Write the 3 byte segment offset. **/
void
binary_trie::write_segment(std::ostream &dat_stream) const
{
int len = nodes.size();
dat_stream << (char) (0xFF & len);
dat_stream << (char) (0xFF & (len >> 8));
dat_stream << (char) (0xFF & (len >> 16));
}
/** Write the trie to a stream in GeoIP binary format. */
void
binary_trie::write_binary(std::ostream &dat_stream) const
{
for (std::vector<node>::const_iterator it = nodes.begin();
it != nodes.end(); ++it) {
union {
uint8_t bytes[6];
char chars[6];
} binary = {{
(it->edges[0] ) & 0xFF,
(it->edges[0] >> 8) & 0xFF,
(it->edges[0] >> 16) & 0xFF,
(it->edges[1] ) & 0xFF,
(it->edges[1] >> 8) & 0xFF,
(it->edges[1] >> 16) & 0xFF
}};
dat_stream.write(binary.chars, 6);
if (dat_stream.bad())
return;
}
}
namespace {
void
v4_csv_line_to_vector(
const std::string line,
std::vector<std::string> &fields)
{
std::string buf(line);
std::string delim = ",";
std::size_t fs;
for(int i = 0; i<2;++i) {
fs = buf.find(delim);
fields.push_back(buf.substr(0,fs));
buf.erase(0,fs + 1);
}
fields.push_back(buf.substr(1, buf.length() - 2));
}
void
v6_csv_line_to_vector(
const std::string line,
std::vector<std::string> & fields)
{
std::string buf(line);
std::string delim = ", ";
std::size_t fs;
for(int i = 0; i<3;++i) {
fs = buf.rfind(delim);
fields.push_back(buf.substr(fs+2, buf.length()));
buf.erase(fs,buf.length());
}
fields.push_back(buf.substr(0, buf.length()));
}
/** Load ranges of IP addresses from a CSV-formatted stream to
* a trie.
*
* \param trie
* Load the ranges to this trie, overwriting original values.
*
* \param csv_file_name
* The name of the file that \a csv_stream is reading.
* This string is used only for error messages.
*
* \param csv_stream
* Load the ranges from this stream.
*
* \param address_family
* The type of IP addresses in the CSV data: either AF_INET * for IPv4 or AF_INET6 for IPv6. */
void
csv_stream_to_trie_db(
binary_trie &trie,
std::string &database_segment,
const char *csv_file_name,
std::istream &csv_stream,
int address_family)
{
enum {
V4_CSV_FIELD_MIN_DECIMAL,
V4_CSV_FIELD_MAX_DECIMAL,
V4_CSV_FIELD_ASNUM_DESCRIPTION,
V4_CSV_FIELDS
};
enum {
V6_CSV_FIELD_NET_BITS,
V6_CSV_FIELD_MAX_TEXT,
V6_CSV_FIELD_MIN_TEXT,
V6_CSV_FIELD_ASNUM_DESCRIPTION,
V6_CSV_FIELDS
};
std::string csv_line;
std::map<std::string,int> segment_offset;
std::vector<std::string> csv_fields;
// create a map to track which as descriptions are added already
int csv_line_number = 0;
database_segment += '\0'; // padding so that record 0 is not at the start of the db.
while (getline(csv_stream, csv_line)) {
++csv_line_number;
std::string as;
switch (address_family) {
case AF_INET:
v4_csv_line_to_vector(csv_line, csv_fields);
if (csv_fields.size() != V4_CSV_FIELDS) {
error_at_line(EX_DATAERR, 0, csv_file_name, csv_line_number,
"Wrong number of fields");
}
as = csv_fields[V4_CSV_FIELD_ASNUM_DESCRIPTION];
if (segment_offset.find(as) == segment_offset.end()) { // no key found
segment_offset[as] = database_segment.length(); // start of record
database_segment += csv_fields[V4_CSV_FIELD_ASNUM_DESCRIPTION] + '\x00';
}
break;
case AF_INET6:
v6_csv_line_to_vector(csv_line, csv_fields);
if (csv_fields.size() != V6_CSV_FIELDS) {
error_at_line(EX_DATAERR, 0, csv_file_name, csv_line_number,
"Wrong number of fields");
}
as = csv_fields[V6_CSV_FIELD_ASNUM_DESCRIPTION];
if (segment_offset.find(as) == segment_offset.end()) { // no key found
segment_offset[as] = database_segment.length(); // start of record
database_segment += csv_fields[V6_CSV_FIELD_ASNUM_DESCRIPTION] + '\x00';
}
break;
default:
abort();
}
// use the MSB to indicate that this is a data record. Later, the field
// is set to the segment offset + the nubmer of nodes in the trie.
const binary_trie::edge_type leaf = 0x80000000 | segment_offset[as];
union {
struct in_addr inet;
uint8_t inetbytes[4];
struct in6_addr inet6;
} minaddr, maxaddr;
switch (address_family) {
case AF_INET:
minaddr.inet.s_addr = htonl(atoi(csv_fields[V4_CSV_FIELD_MIN_DECIMAL].c_str()));
maxaddr.inet.s_addr = htonl(atoi(csv_fields[V4_CSV_FIELD_MAX_DECIMAL].c_str()));
trie.set_range(minaddr.inetbytes, maxaddr.inetbytes,
32, leaf);
break;
case AF_INET6:
if (inet_pton(address_family, csv_fields[V6_CSV_FIELD_MIN_TEXT].c_str(), &minaddr) <= 0) {
error_at_line(EX_DATAERR, 0, csv_file_name, csv_line_number,
"Cannot parse minimum address: %s",
csv_fields[V6_CSV_FIELD_MIN_TEXT].c_str());
}
if (inet_pton(address_family, csv_fields[V6_CSV_FIELD_MAX_TEXT].c_str(), &maxaddr) <= 0) {
error_at_line(EX_DATAERR, 0, csv_file_name, csv_line_number,
"Cannot parse maximum address: %s",
csv_fields[V6_CSV_FIELD_MAX_TEXT].c_str());
}
trie.set_range(minaddr.inetbytes, maxaddr.inetbytes,
128, leaf);
break;
default:
abort();
}
csv_fields.clear();
}
if (csv_stream.bad()) {
error(EX_IOERR, errno, "%s", csv_file_name);
}
}
/** Load ranges of IP addresses from a CSV-formatted file or
* standard input to a trie.
*
* \param trie
* Load the ranges to this trie, overwriting original values.
*
* \param csv_file_name
* The name of the CSV file that should be read, or "-" for
* standard input.
*
* \param address_family
* The type of IP addresses in the CSV data: either AF_INET
* for IPv4 or AF_INET6 for IPv6. */
void
csv_file_to_trie_db(
binary_trie &trie,
std::string &database_segment,
const char *csv_file_name,
int address_family)
{
if (std::strcmp(csv_file_name, "-") == 0) {
csv_stream_to_trie_db(trie, database_segment, csv_file_name, std::cin, address_family);
} else {
std::ifstream csv_stream(csv_file_name, std::ios::in);
if (!csv_stream) {
error(EX_NOINPUT, errno, "%s", csv_file_name);
}
csv_stream_to_trie_db(trie, database_segment, csv_file_name, csv_stream, address_family);
}
}
/** Write a GeoIP binary database to a stream.
*
* \param trie
* Mapping from IP addresses to country codes or other values.
*
* \param dat_file_name
* The name of the file that \a dat_stream is writing.
* This string is used only for error messages.
*
* \param dat_stream
* Write the database to this stream.
*
* \param database_info
* Copyright or other information about the database, or NULL.
* GeoIP_database_info() will return this string.
*
* \param address_family
* The type of IP addresses in the database: either AF_INET
* for IPv4 or AF_INET6 for IPv6. */
void
write_dat_stream(
const binary_trie &trie,
const char *dat_file_name,
std::ostream &dat_stream,
const char *database_info,
std::string database_segment,
int address_family)
{
trie.write_binary(dat_stream);
if (dat_stream.bad()) {
error(EX_IOERR, errno, "%s", dat_file_name);
}
// or open the file and read the length
if (database_segment.length() > 0) {
dat_stream << database_segment;
if (dat_stream.bad()) {
error(EX_IOERR, errno, "%s", dat_file_name);
}
}
// write the metadata section
if (database_info) {
const char tag[3] = { 0, 0, 0 };
dat_stream.write(tag, 3);
dat_stream.write(database_info, std::strlen(database_info));
if (dat_stream.bad()) {
error(EX_IOERR, errno, "%s", dat_file_name);
}
}
switch (address_family) {
case AF_INET: {
const char structure_info[4] = { (char)0xFF, (char)0xFF,
(char)0xFF, 9 };
dat_stream.write(structure_info, 4);
break;
}
case AF_INET6: {
const char structure_info[4] = { (char)0xFF, (char)0xFF,
(char)0xFF, 21 };
dat_stream.write(structure_info, 4);
break;
}
default:
abort();
}
trie.write_segment(dat_stream);
if (dat_stream.bad()) {
error(EX_IOERR, errno, "%s", dat_file_name);
}
}
/** Write a GeoIP binary database to a file or standard output.
*
* \param trie
* Mapping from IP addresses to country codes or other values.
*
* \param csv_file_name
* The name of the file that should be written, or "-" for
* standard output.
*
* \param database_info
* Copyright or other information about the database, or NULL.
* GeoIP_database_info() will return this string.
*
* \param address_family
* The type of IP addresses in the database: either AF_INET
* for IPv4 or AF_INET6 for IPv6. */
void
write_dat_file(
const binary_trie &trie,
const char *dat_file_name,
const char *database_info,
std::string database_segment,
int address_family)
{
if (std::strcmp(dat_file_name, "-") == 0) {
write_dat_stream(trie, dat_file_name, std::cout,
database_info, database_segment, address_family);
} else {
std::ofstream dat_stream(
dat_file_name,
std::ios::out | std::ios::binary);
if (!dat_stream) {
error(EX_CANTCREAT, errno, "%s", dat_file_name);
}
write_dat_stream(trie, dat_file_name, dat_stream,
database_info, database_segment, address_family);
}
}
struct cmdline {
const char *csv_file_name;
const char *dat_file_name;
int address_family;
const char *database_info;
bool verbose;
cmdline(int argc, char **argv);
};
}
cmdline::cmdline(int argc, char **argv):
csv_file_name("-"),
dat_file_name("-"),
address_family(AF_INET),
database_info(NULL),
verbose(false)
{
enum {
OPT_HELP = -2
};
static const struct option long_options[] = {
{ "info", required_argument, NULL, 'i' },
{ "output", required_argument, NULL, 'o' },
{ "verbose", no_argument, NULL, 'v' },
{ "help", no_argument, NULL, OPT_HELP },
{ NULL, 0, NULL, 0 }
};
static const char *const usage = "\
Usage: %s [OPTION] [CSV-FILE]...\n\
Convert a country database from CSV to GeoIP binary format.\n\
\n\
-i, --info=TEXT add copyright or other info TEXT to output\n\
-o, --output=FILE write the binary data to FILE, not stdout\n\
-v, --verbose show what is going on\n\
--help display this help and exit\n";
for (;;) {
int optret = getopt_long(argc, argv, "46i:o:v", long_options, NULL);
if (optret == -1)
break;
switch (optret) {
case '4':
address_family = AF_INET;
break;
case '6':
address_family = AF_INET6;
break;
case 'i':
database_info = optarg;
if (std::strlen(database_info) > 99) {
error(EX_USAGE, 0,
"Database info must not be longer than 99 bytes");
}
break;
case 'o':
dat_file_name = optarg;
break;
case 'v':
verbose = true;
break;
case OPT_HELP:
std::printf(usage, program_invocation_name);
std::exit(EX_OK);
case '?':
std::fprintf(stderr,
"Try `%s --help' for more information.\n",
program_invocation_name);
std::exit(EX_USAGE);
default:
std::abort();
}
}
if (optind < argc)
csv_file_name = argv[optind++];
if (optind < argc) {
error(EX_USAGE, 0,
"Only one non-option argument is allowed");
}
}
int
main(int argc, char **argv)
{
cmdline cmdline(argc, argv);
std::ostream *verbose_stream;
if (!cmdline.verbose)
verbose_stream = NULL;
else if (strcmp(cmdline.dat_file_name, "-") == 0)
verbose_stream = &std::cerr;
else
verbose_stream = &std::cout;
if (verbose_stream) {
*verbose_stream << program_invocation_name
<< ": Reading CSV and building the trie"
<< std::endl;
}
/* Initialize the trie with a value that will point to the start of the
* data section, e.g. an empty record. See binary_trie::update_records()
*/
binary_trie trie(0x80000000);
std::string database_segment;
csv_file_to_trie_db(trie, database_segment, cmdline.csv_file_name, cmdline.address_family);
if (verbose_stream) {
*verbose_stream << program_invocation_name
<< ": Optimizing" << std::endl;
}
trie.reorder_depth_first();
trie.reorder_in_blocks(1024);
trie.update_records();
if (verbose_stream) {
*verbose_stream << program_invocation_name
<< ": Writing output" << std::endl;
}
write_dat_file(trie, cmdline.dat_file_name, cmdline.database_info,
database_segment, cmdline.address_family);
if (verbose_stream) {
*verbose_stream << program_invocation_name
<< ": All done" << std::endl; }
}
