File sanlock.changes of Package sanlock
-------------------------------------------------------------------
Wed Oct 16 20:14:45 UTC 2024 - jfehlig@suse.com
- Update to version 3.9.5:
* sanlock: change log level for resource names
* sanlock: include worker thread info in status
* sanlock: reuse io buffer with hugepages
* sanlock: use hugepages to avoid splitting read io
* sanlock: don't reduce max_sectors_kb
* sanlock: fix is dead log message for unused host id
* sanlock: repeat helper_msg string termination
* sanlock: fix invalid strcpy in direct dump
-------------------------------------------------------------------
Mon Jul 1 20:41:34 UTC 2024 - James Fehlig <jfehlig@suse.com>
- suse-systemd.patch: Remove redundant 'ExecStart' from wdmd.service
boo#1227208
-------------------------------------------------------------------
Mon Jun 3 22:54:40 UTC 2024 - James Fehlig <jfehlig@suse.com>
- Update to sanlock 3.9.3
- Make the watchdog timeout configurable
- wdmd: close watchdog when not used
- userstorage: replace by PyPI userstorage
- sanlock: skip short delay in delta lease reacquire
- sanlock: use product_uuid for host name
- wdmd: fix timing for iTCO_wdt
- sanlock: save client_id in token and report in status and use in -C
- sanlock: include startup message in syslog
- sanlock: improve repeated ballots in paxos_acquire
- sanlock: fix zero io timeout for direct requests
- sanlock: fix release writing zero dblock values
- sanlock: skip delay when same host acquires delta lease
-------------------------------------------------------------------
Mon Feb 26 13:04:34 UTC 2024 - Dominique Leuenberger <dimstar@opensuse.org>
- Use %patch -P N instead of deprecated %patchN.
-------------------------------------------------------------------
Mon Jan 29 10:25:13 UTC 2024 - Dirk Müller <dmueller@suse.com>
- add user()/group() provides for rpm 4.19
-------------------------------------------------------------------
Tue Oct 18 14:27:20 UTC 2022 - James Fehlig <jfehlig@suse.com>
- Update to sanlock 3.8.5
- python: Replace distutils with setuptools
- sanlock: fix memory leak of lockspace renewal_history
- sanlock: fix pthread_create error check
- sanlock: use helper to set max_sectors_kb
-------------------------------------------------------------------
Tue Nov 16 14:08:25 UTC 2021 - Johannes Segitz <jsegitz@suse.com>
- Added hardening to systemd service(s) (bsc#1181400). Added patch(es):
* harden_fence_sanlockd.service.patch
* harden_sanlk-resetd.service.patch
-------------------------------------------------------------------
Wed Jun 9 19:58:35 UTC 2021 - James Fehlig <jfehlig@suse.com>
- Update to sanlock 3.8.4
- sanlock: socket send and recv retries
- python: expose {get,set}_lvb
- sanlock: Shrink thread pool when there is no work
- config: Add max_worker_threads
-------------------------------------------------------------------
Fri Oct 23 20:58:29 UTC 2020 - Benjamin Greiner <code@bnavigator.de>
- Make python subpackage ready for multiple python3 flavors
using the multibuild feature gh#openSUSE/python-rpm-macros#66
-------------------------------------------------------------------
Tue Aug 18 22:48:21 UTC 2020 - James Fehlig <jfehlig@suse.com>
- Update to sanlock 3.8.2
- Remove extra link args
- Add write_init_io_timeout
- Disable high_priority SCHED_RR by default
- Dropped patches:
sanlock-lto-disable-fpie.patch
- Add tar_scm source service and use xz compression
-------------------------------------------------------------------
Mon Jul 13 21:39:12 UTC 2020 - James Fehlig <jfehlig@suse.com>
- Update to sanlock 3.8.1
- python: add flake8 env
- Add client debug logging
_ Add per command debug logging
- Misc bug fixes and improvements
-------------------------------------------------------------------
Fri Aug 16 07:37:30 UTC 2019 - Dominique Leuenberger <dimstar@opensuse.org>
- Addpkgconfig(uuid) BuildRequires: so far we relied on util-linux'
blkid to pull in uuid for us.
-------------------------------------------------------------------
Mon Jun 24 14:49:15 UTC 2019 - Martin Liška <mliska@suse.cz>
- Add sanlock-lto-disable-fpie.patch in order to handle
boo#1138836. Extra -fPIE is stripped.
-------------------------------------------------------------------
Mon Jun 17 21:45:36 UTC 2019 - Jim Fehlig <jfehlig@suse.com>
- Update to sanlock 3.8.0
- Add support for python 3
- Add support for 4k sector size
- More API test coverage
- Misc bug fixes and improvements
- Dropped patches:
revert-5d535c0d-py2.patch, sanlock-python3.patch
-------------------------------------------------------------------
Tue Apr 9 22:17:12 UTC 2019 - Jim Fehlig <jfehlig@suse.com>
- Update to sanlock 3.7.1
- Fix bugs in read_resource_owners
-------------------------------------------------------------------
Thu Mar 21 20:27:25 UTC 2019 - Jim Fehlig <jfehlig@suse.com>
- Update to sanlock 3.7.0
- Allow setting max_sectors_kb
- Configurable sector size and align size
- Support SANLOCK_RUN_DIR and SANLOCK_PRIVILEGED environment
variables
- Revert upstream commit forcing use of python2
revert-5d535c0d-py2.patch
- Dropped patches:
sanlock-old_blkid.patch, suse-fix-link-errors.patch
-------------------------------------------------------------------
Mon Mar 26 16:36:05 UTC 2018 - jfehlig@suse.com
- Fix module initialization to work with both python2 and python3
Updated sanlock-python3.patch
bsc#1076414
-------------------------------------------------------------------
Wed Mar 21 12:58:08 UTC 2018 - tchvatal@suse.com
- Add code to build with both python2 and python3 bindings with
provided condition so we can later on optionalize python2 builds
sanlock-python3.patch
bsc#1076414
-------------------------------------------------------------------
Wed Mar 21 12:44:29 UTC 2018 - tchvatal@suse.com
- Cleanup with spec-cleaner (only support SLE12 and newer)
- Add -fno-strict-aliasing to python subpkg
- Create rcsanlk-resetd link for the service control
-------------------------------------------------------------------
Tue Dec 5 18:53:41 UTC 2017 - jfehlig@suse.com
- Update to sanlock 3.6.0
- preserve dblock values when setting shared flag
- fix detection of shared lease
- fix release interference with paxos
- retry ballot when new lver is seen
- add a NOWAIT flag for convert
-------------------------------------------------------------------
Thu Nov 23 13:47:59 UTC 2017 - rbrown@suse.com
- Replace references to /var/adm/fillup-templates with new
%_fillupdir macro (boo#1069468)
-------------------------------------------------------------------
Wed Jun 7 22:39:48 UTC 2017 - jfehlig@suse.com
- Update to sanlock 3.5.0
- increase open file limit to 2048
- add option to log UTC timestamps
- doc improvements
- Remove support for old, non-systemd distros
-------------------------------------------------------------------
Fri Apr 7 21:53:33 UTC 2017 - jengelh@inai.de
- Remove redundant %if guards around %package and scriptlets.
They are only really needed for %files.
- Replace $RPM_ shell vars by modern macros.
- Trim descriptions a little.
-------------------------------------------------------------------
Mon Apr 3 15:43:17 UTC 2017 - jfehlig@suse.com
- spec: fix permissions on config files
-------------------------------------------------------------------
Mon Apr 3 15:31:43 UTC 2017 - jfehlig@suse.com
- Use System/Base in fence and reset subpackages
-------------------------------------------------------------------
Mon Apr 3 07:21:10 UTC 2017 - mpluskal@suse.com
- Use correct permissions on unit files (bsc#1032046)
-------------------------------------------------------------------
Wed Mar 29 10:49:35 UTC 2017 - meissner@suse.com
- prerequire groupadd and useradd.
-------------------------------------------------------------------
Wed Mar 15 08:23:44 UTC 2017 - zren@suse.com
- Update to sanlock 3.4.0
- Enable fence_sanlockd so that lvm2 can use the new lvmlocked
feature in cluster environment
* fix unpackaged file - /usr/sbin/rcfence_sanlockd
* refresh suse-no-date-time.patch to cover the same issue
in fence_sanlockd
* adjust fence_sanlockd.init and suse-systemd.patch
- Enable sanlk-reset subpackage
- Fix "undefined symbol to io_suspend" at runtime, bsc#1030060
suse-fix-link-errors.patch
-------------------------------------------------------------------
Sat Mar 11 08:40:02 UTC 2017 - kukuk@suse.com
- Add group disk as Prerequires
-------------------------------------------------------------------
Fri Jun 19 10:48:55 MDT 2015 - jfehlig@suse.com
- Update to sanlock 3.2.4
- Add conf file sanlock.conf
- Add pkgconfig files
- Numerous improvements and bug fixes. For details, see
https://git.fedorahosted.org/cgit/sanlock.git/log/
-------------------------------------------------------------------
Sat Mar 21 16:26:54 UTC 2015 - p.drouand@gmail.com
- Update to version 3.2.2
* reset: native timeout
* reset: Reduce logging noise to stderr and syslog
* sanlock, reset: coverity fixes
- Refactor specfile to be policy compliant
- Use download Url as source
- Add xz build requires; needed as the source tarball is compressed
with xz
- Do not provide both systemd and sysvinit support on a same system;
it's redundant
- Add systemd backward compatibility links
- Update patchs:
* suse-no-date-time.patch
* suse-systemd.patch
-------------------------------------------------------------------
Fri Jan 10 10:16:16 MST 2014 - jfehlig@suse.com
- Update to sanlock 3.1.0
- fix debug status for add/rem lockspace
- add_lockspace error for conflicting lockspace definitions
- transient timeout handling in acquire and release
- allow more than 8 resources per client
- fix spaces in path names
-------------------------------------------------------------------
Thu Aug 1 16:42:24 MDT 2013 - jfehlig@suse.com
- Update to sanlock 3.0.1
- Add lvb feature
- Various bug fixes and improvements
- Drop upstream patch 0001-fix-systemd-service-files.patch
-------------------------------------------------------------------
Fri Mar 1 06:25:28 UTC 2013 - coolo@suse.com
- update license to new format
-------------------------------------------------------------------
Mon Dec 3 15:09:22 MST 2012 - jfehlig@suse.com
- Update to sanlock 2.6
- Add fence_sanlock, a fence agent that uses /dev/watchdog to
reset hosts (currently disabled)
- Various bug fixes and improvements
-------------------------------------------------------------------
Tue Mar 13 12:04:11 MDT 2012 - jfehlig@suse.com
- Update to sanlock 2.1
- python: release leases for other processes
- python: add shared resource parameter to acquire
- add a logrotate file
- status for all shared tokens
- retry transient sh failures
- fix inquire state string
-------------------------------------------------------------------
Wed Jan 25 11:03:43 MST 2012 - jfehlig@suse.com
- Fixed init script packaging
-------------------------------------------------------------------
Mon Jan 23 11:20:40 MST 2012 - jfehlig@suse.com
- Fixed specification of licenses
-------------------------------------------------------------------
Mon Jan 23 09:39:31 MST 2012 - jfehlig@suse.com
- Source sanlock tarball instead of download URL
-------------------------------------------------------------------
Fri Jan 20 15:37:56 MST 2012 - jfehlig@suse.com
- Don't use __DATE__ and __TIME__ macros when printing version
- Don't add user 'sanlock' for now
-------------------------------------------------------------------
Thu Jan 19 18:04:13 MST 2012 - jfehlig@suse.com
- Fix some rpmlint warnings
-------------------------------------------------------------------
Thu Jan 19 17:05:58 MST 2012 - jfehlig@suse.com
- Add support for systemd
- Add /etc/sysconfig/sanlock configuration file
-------------------------------------------------------------------
Thu Jan 19 16:23:03 MST 2012 - jfehlig@suse.com
- Pass '-g sanlock' option to wdmd
-------------------------------------------------------------------
Wed Jan 18 10:17:57 MST 2012 - jfehlig@suse.com
- Update to sanlock 1.9
- Add SUSE init script for sanlock and wdmd
-------------------------------------------------------------------
Thu Dec 22 01:15:39 CET 2011 - ro@suse.de
- initial package based on package from openstack
