File i3status.changes of Package i3status

Mon Sep  9 08:50:37 UTC 2019 - Dan Čermák <>

- update to version 2.13:
 * add memory module
 * add read_file module
 * drop CAP_NET_ADMIN (not needed on Linux ≥ 2.6.37)
 * switch to autotools
 * battery: hide seconds by default
 * wireless: add format_quality
 * doc: clarify min_width not being supported with dzen2/xmobar
 * battery: read multiple batteries on DragonFlyBSD
 * make: don’t use pulseaudio on DragonFlyBSD
 * wireless: detect interface type on DragonFlyBSD
 * cpu usage: fix: correctly print usage for cpu 10
 * cpu usage: fix: correctly print for invalid %cpu placeholder
 * cpu usage: support non-consecutive CPUs
 * time: add only_when_tz_different option
 * ethernet: add %interface
 * ethernet: fix speed display for 100 Gbit/s cards
 * battery: handle POWER_SUPPLY_STATUS=Not charging
 * volume: provide more natural volume percentage with ALSA
 * volume: fix ALSA capture device monitoring
 * volume: implement %devicename for PulseAudio and ALSA
 * config: re-arrange disk after network interfaces
 * fix: include sys/socket.h on macOS
 * fix: strip network interface labels
 * fix glob(3) error handling
 * various testsuite improvements
 * switch to clang-format-3.8

Fri May 18 15:47:31 UTC 2018 -

- Ensure neutrality of description.

Sat May 12 03:32:58 UTC 2018 -

- update to version 2.12:
 * show IP address when address has a label
 * treat zero battery capacity as "not available"
 * add IPv6 address when IPv4 isn't available
 * call tzset at each time print to pick up time zone changes
 * doc: fixed minor typos
 * be more cautious about handling invalid battery measurements.
 * fix CPU unit tests
 * use local timezone for battery %emptytime
 * fix memory leak/use BEGINS_WITH macro
 * _first_: add check for virtual ethernet devices
 * add battery capacity parsing
 * multiple CPU support for cpu_usage
 * remove useless checks (we use char, not unsigned char) to fix
   compilation warnings
 * disk: sanitize trailing slashes
 * suppress printing :00 seconds of remaining battery lifetime, as
   apm(4)'s estimate only has a granularity of minutes.
 * Makefile: make PKG_CONFIG overridable
 * man page updates
- cleanup with spec-cleaner
- use https urls
- remove yajl fallback from source to ensure ours is used
- remove SLOC comment from description (no longer valid)

Wed Apr 12 20:47:43 UTC 2017 -

- update to version 2.11:
  * re-add forgotten wakeup call from SIGUSR1 handler
  * disk_info: bugfix: check format_not_mounted is not NULL before
    using it
  * revert back to using nanosleep
  * man: give more descriptive symbols to battery format
  * battery: removes the 'remaining' time when the battery is full
  * add separator and separator_block_width as universal module
  * man: fix link to contrib
  * cpu_temperature: add glob check
  * battery: add status_unk
  * reconnect to PluseAudio when connection is lost
  * wireless: add ifdef to compile on macOS
  * order default configuration paths the same as in i3
  * add version files for release tarball
  * man: make tztime example config match the context
  * cpu_usage: add color thresholds
  * battery: support multiple batteries
  * disk: use empty string for not mounted disks
  * default config: remove DHCP, VPN
  * wireless: fix FTBFS on hurd and kFreeBSD
  * parse uevent file to detect network device type
  * allow pulse device to be specified by name
  * battery: find batteries using glob
  * tztime: support locales
  * wireless: use blank padding for quality
  * add unit tests
  * fix compilation with -fno-common

Tue Mar  8 08:03:19 UTC 2016 -

- specfile:
  * add libnl3-devel, libpulse-devel

- update to version 2.10:
  * man: fix typo in battery example
  * Pass the "instance" JSON property key for tztime blocks
  * Fix build (and build warnings) on FreeBSD
  * Fix build on OpenBSD
  * path_exists, run_watch: add format_down
  * volume: add PulseAudio support. This significantly reduces battery
    consumption on systems that use PulseAudio, which is the default
    on any modern Linux desktop.
  * wireless/OpenBSD: use the maximum rssi, not the scaled percentage
    for the signal level.
  * make: Add support for differing PREFIX and MANPREFIX.
  * battery: make output HH:MM across all platforms.
  * battery: clamp the percentage at 100% when last_full_capacity is
  * Use format_not_mounted if the directory for a disk_info block does
    not exist.
  * disk_info/OS X: Fix build.
  * volume/OpenBSD: use SndIO.
  * eth, wireless: Use "color_degraded" when interface has no IP.
  * eth, wireless/FreeBSD: Fix for recent FreeBSD versions.
  * wireless/Linux: switch from libiw to libnl. This allows you to run
    i3status on kernels which don’t have the wext compatibility module
  * battery/FreeBSD: properly detect charging status
  * eth: first_eth_interface: ignore MAC addresses, look for IPv4/IPv6
  * Implement support for Pango markup.
  * format detection: recognise swaybar

Mon Jun  8 04:52:20 UTC 2015 -

- update to version 2.9:
  * meta: i3status is now on GitHub and uses clang-format
  * allow customization of the module separator
  * add “align” and “min_width” options for each module
  * fix CFLAGS and LDFLAGS for DragonFly and FreeBSD
  * add contrib/net-speed, a more light-weight reimplementation of
  * contrib/measure-net-speed.bash
  * battery: add hide_seconds option
  * battery: fix for systems without POWER_SUPPLY_VOLTAGE_NOW
  * battery: for %percentage, drop leading 0 for values < 10
  * battery: add NetBSD support
  * battery: use absolute values for (dis)charging rates
  * battery: introduce status_{chr,bat,full}
  * cpu_temperature: fix displaying multiple sensors
  * cpu_temperature: fix NetBSD support
  * cpu_temperature: fix DragonFly support
  * disk: introduce threshold_type and low_threshold
  * disk: add format_not_mounted for unmounted paths
  * ethernet, wireless: support special interface name _first_
  * run_watch: check all matching pid files until first valid one
  * volume: fix wrong color tags with xmobar
  * wireless: support %frequency (2.4 vs. 5 GHz)

Sun Feb  1 00:41:34 UTC 2015 -

- replaced tar-ball with tar-ball from Source location
  (they were different for some location, which was the
  reason the package didn't get updated in Factory)
- Removed i3status-2.7-makefile.patch

Sa Jul 26 22:2:11 UTC 2014 -

  Fix build on GNU/Hurd
  Add format_down for battery if no battery is available
  Use degraded color in case volume is muted with OSS
  Support mixer_idx with OSS
  Enable colored output for battery on FreeBSD
  print_volume: don’t return, complete the buffer first
  Support colored output for CPU temperature on FreeBSD
  manpage: mention i3bar in the description
  manpage: be more explicit about the path option
  battery: use path as i3bar JSON “instance”
  print_volume(linux): Open a new mixer every time
  Implement term output format
  signal handler: set flag because directly calling fprintf() is unsafe
  Makefile: use .SILENT and support V=1 for verbose builds
  load: allow max_threshold to be a float
  manpage: Add example path for CPU temperature
  Fix build on NetBSD
  Implement cpu usage, ethernet status, cpu temperature on NetBSD
  fix slurp(), it needs to read size-1 for the trailing NUL
  format detection: simplify code, handle "sh" processes in the hierarchy
  default config: show %avail disk space instead of %free
  Added different format string for volume in case it is muted
  manpage: document format_muted
  add support for path_exists directive
  disk: Distinguish between IEC, SI and custom prefixes

Thu Mar 14 08:52:47 UTC 2013 -

- Update to 2.7 version
  * Skip a day in the Discordian calendar when St. Tib's Day has
  * colors: Handle down wireless interfaces just like ethernet
  * temperature: introduce max_threshold
  * battery: colorize output even without discharge rate
  * ddate: Reduce the season day to 0-9 to properly print ordinal
  * add good, degraded and bad colors per module
  * config: introduce an utf-8 character so that editors are forced
    to use utf-8
  * ddate: Teen ordinal numbers always use a 'th' suffix.
  * make SIGUSR1 do nothing, so that killall -USR1 i3status will
    force an update
  * changing volume color from bad to degraded if muted
  * make refreshs align with minutes
  * wifi: properly display ad-hoc networks
  * Bugfix: output auto detect: properly detect ambiguous situations
  * Add tztime module to support multiple different timezones
  * battery: add option to show capacity without decimals
  * Add colorized output for load avg
  * ipv6: properly handle colors for output_format == xmobar
  * contrib: fix premature insetion of status message into JSON

- Spec file cleanup
  * rebased i3status-makefile.patch and renamed as

Sat Nov 24 18:39:30 CET 2012 -

- initial version (2.6)
openSUSE Build Service is sponsored by