File blktests.changes of Package blktests
-------------------------------------------------------------------
Tue Jul 29 16:49:41 UTC 2025 - sebastian.chlad@suse.com
- Update to version 0+20250718.d24f744:
* common/null_blk: wait device ready in _configure_null_blk
* loop/010, common/rc: drain udev events after test
* md/002: add atomic write tests for md/stacked devices
* common/null_blk: check FULL file availability before write
* block: add block/040 for test updating nr_hw_queues vs switching elevator
* nvme/049: add fio md_per_io_size option
* nvme/{034,035}: skip when the test target namespace has metadata
* nvme/064: fix failure when the sysfs metadata_bytes doesn't exist
* tests/throtl: add a new test 007
* nvme: add nvme metadata passthrough test
* nvme/rc: introduce helper functions to check namespace metadata
* loop/011: use lazy umount for tmpfs
* check: allow strict error-checking by "set -e" in test cases
* common/rc: Optimize _module_file_exists()
* common/null_blk: Make configuration failures easier to debug
* common/null_blk: Log null_blk configuration parameters
* common/null_blk: Rename a local variable
* common/fio: Optimize _fio_perf_report()
* common/fio: Log the fio arguments
* common/nvme: fix nvme json support check in _have_nvme_cli_with_json_support
* common/scsi_debug: Use _unload_module in _exit_scsi_debug
* nvme/rc, md/001: check that nvme-cli supports json output format
* common/nvme: introduce _have_nvme_cli_with_json_support()
* zbd/006: reset only the test target zone
* README, CONTRIBUTING: refer to the new repository addresses
* nvme/063: fixup tls_key encryption check
* nvme/054: update to support all fabrics
* nvme/rc: fix the skip reasons in _require_nvme_cli_tls
* block: add test for race between set_blocksize and read paths
-------------------------------------------------------------------
Wed Apr 23 14:28:05 UTC 2025 - sebastian.chlad@suse.com
- Update to version 0+20250415.9aa2023:
* nvme: add testcase for secure concatenation
* nvme: add testcase for TLS-encrypted connections
* common/nvme: handle option '--concat' for _nvme_connect_subsys
* common/nvme: TLS target support
* common/nvme: add '--tls' argument to _nvme_connect_subsys()
* nvme/rc: introduce _have_libnvme_ver()
* nvme/rc: introduce _have_tlshd_ver() and _have_systemd_tlshd_service()
* common/rc,fio: factor out _compare_three_version_numbers()
* common/rc: introduce _systemctl_start() and _systemctl_stop()
* common/rc: introduce _have_systemctl_unit()
* nvme/061: add test teardown and setup fabrics target during I/O
* nvme/060: add test nvme fabrics target resetting during I/O
* common/nvme: move nvmf_wait_for_state to common code
* common/nvme: add debug nvmet path variable
* nvme/025: use character device for nvme effects-log command
* src/Makefile: include CFLAGS in probe macros
* zbd/012: avoid fio stop by I/O scheduler set failure
* common/nvme: use correct local wwnn/wwpn for rport removal
* tests/throtl: add a new test 006
* common/xfs: verify xfs_io supports statx atomic write attributes
* common/xfs: add _test_dev_suits_xfs() to verify logical block size will work
* tests: use test device min io to support bs > ps
* common/xfs: use min io for fs blocksize
* common: add and use min io for fio
* block/032: make error messages clearer if mkfs or mount fails
* common/xfs: ignore first umount error on _xfs_mkfs_and_mount()
* nvme/059: add atomic write tests
* scsi/009: add atomic write tests
* srp: skip test if scsi_transport_srp module is loaded and in use
* nvme/056: Add check for empty ddp capabilities
* nvme/058: detach loop device after test finish
* nvme/053: do not use awk
* tests: Remove unnecessary '&&' in requires() functions
* throtl: fix the race between submitting IO and setting cgroup.procs
* throtl/002: calculate block-size based on device max-sectors setting
* common/rc: test _have_driver before checking driver parameter
* tests/rnbd: Implement RNBD regression test
* tests/rnbd: Add a basic RNBD test
* zbd/012: Test higher queue depths
* common/ublk: update io_uring setting during the tests
* block/035: use the common functions _io_uring_enable/_io_uring_restore
* common/rc: introduce _io_uring_enable/_io_uring_restore
* blktests: src/miniublk.c: fix segment fault when io_uring is disabled
* nvme/049: update fio_output msg check for io_uring_cmd support
* throtl/{002,003}: update max_sectors setting
* blktests: src/miniublk.c: fix unaligned mmap offset for 64K page size
* nvme: add test for rapid namespace remapping
* nvme: add test for basic ANA support
* nvme: delete all ana_groups when removing a port
* nvme: add argument '--ports' to _nvmet_target_setup()
* nvme: add _setup_nvmet_ns_ana()
* nvme: add _setup_nvmet_port_ana()
* zbd/012: Test requeuing of zoned writes and queue freezing
* nvme/056: add test for nvme-tcp zero-copy offload
* contrib: add remote target setup/cleanup script
* nvme/030: only run against kernel soft target
* common/nvme: add digest options to __nvme_connect_subsys()
* nvme/rc: introduce remote target support
* nvme/{041-045,051,055}: double-quote def_* variable references
* nvme: add test for writing to file-ns just after disabling it
* nvme/052: move nvmf_wait_for_ns() to common/nvme
* block/035: enable io_uring if it is disabled
* nvme/029: capture all the FULL log from test_user_io
* nvme/039: check for logical block size of test device
* nvme: delete all namespaces in _remove_nvmet_subsystem()
* throtl: set "io" to subtree_control only if required
* nvme: drop arguments from _create_nvmet_port()
* nvme: rework fcloop
* nvme/052: do not create namespace when setting up the target
* nvme/017: do not create namespace when setting up the target
* nvme/016: do not create namespace when setting up the target
* nvme: move _nvmet_target_setup() to common/nvme
* nvme/rc: Implement --blkdev none for _nvmet_target_setup()
* tests/throtl: add a new test 005
* tests/throtl: add a new test 004
* tests/throtl: add a new test 003
* tests/throtl: add a new test 002
* tests/throtl: add first test for blk-throttle
* common/nvme, nvme/{016,017,051,052}: introduce def_nsid
* nvme, md/001: support only long options for _create_nvmet_subsystem()
* common/nvme, nvme/{016,017,052}: improve _create_nvmet_ns()
* common/nvme, nvme/003: specify "--port none" to _nvme_connect_subsys()
* nvme: pass in port parameter to _nvme_connect_subsys()
* nvme: check for controller device in _nvme_connect_subsys()
* nvme: simplify _get_nvmet_ports()
* nvme: return error from _find_nvme_ns()
* nvme: fix fc port clean up failure
* nvme/{rc,002,016,017,030}: pass port ID to genctr helper functions
* nvme: introduce wwnn/wwpn helper functions
* nvme: sanitize transport parameter in _create_nvmet_port()
* nvme, md/001: make trtype argument to _create_nvmet_port() optional
* nvme/038: use nvme_trtype instead of hardcoding
* common/rc: Uniform the style of skip reasons
* block/027: setup scsi_debug with MQ
* nvme: test the nvme reservation feature
* nvme/{rc,002,016,017,030,052}, md/001: introduce --resv_enable argument
* common/multipath-over-rdma: remove dir /tmp/fio-state-files
* common/fio: dont save the fio verify.state file
* block/031: remove the fio verify.state file
* nvme/{033-037}: timeout while waiting for nvme passthru namespace device
* nvme/052: wait for namespace removal before recreating namespace
* nvme: add test for controller rescan under I/O load
* nvme/032: skip on non-PCI devices
* nvme/{033-037,039}: skip passthru tests on multipath devices
* zbd/011: add test for DM resource limits stacking
* loop/011: skip if running on kernel older than v6.9.11
* dm/002: add --retry option to dmsetup remove command
* md: add regression test for "md/md-bitmap: fix writing non bitmap pages"
* nvme: move helper functions to common/nvme
* nbd/rc: check nbd-server port readiness in _start_nbd_server()
* loop/010: skip when kernel is older than v6.11
* loop/010: do not assume /dev/loop0
* dm/002: do not assume 512 byte block size
* nvme: add test for creating/deleting file-ns
* loop: Add regression test for unsupported backing file fallocate
* nbd/004: drop the check for "couldn't allocate config" message
* check: confirm dependent commands
* block/038: support built-in null_blk
* block: add regression test for null-blk concurrently power/submit_queues test
* nvme: add regression test for concurrently enable/disable nvmet ns
* loop: Detect a race condition between loop detach and open
* README: add dependent command descriptions
* blktests: fix how we handle waiting for nbd to connect
* tests/dm: add dm-dust general functionality test
* nvme/rc,srp/rc,common/multipath-over-rdma: rename use_rxe to USE_RXE
* nvme/{rc,016,017}: rename nvme_num_iter to NVME_NUM_ITER
* nvme/{rc,010,017,031,034,035}: rename nvme_img_size to NVME_IMG_SIZE
* nvme/{021,022,025,026,027,028}: do not hard code target blkdev type
* nvme/{007,009,011,013,015,020,024}: drop duplicate nvmet blkdev type tests
* nvme/{006,008,010,012,014,019,023}: support NVMET_BLKDEV_TYPES
* nvme/{002-031,033-038,040-045,047,048}: support NMVET_TRTYPES
* nvme/rc: introduce NVMET_BLKDEV_TYPES
* nvme/rc: add blkdev type environment variable
* nvme/rc: introduce NVMET_TRTYPES
* common/rc: introduce _check_conflict_and_set_default()
* meta/{018,019}: add test cases to check _set_combined_conditions
* common/rc: introduce _set_combined_conditions
* meta/{016,017}: add test cases to check repeated test case runs
* check: use set_conditions() for the CAN_BE_ZONED test cases
* check: support test case repeat by different conditions
* check: factor out _run_test()
* nvme/039: adjust to util-linux v2.40 dmesg format change
* nbd/002: repeat partition existence check for ioctl interface
* nbd/002: fix wrong -L/-nonetlink option usage
* block/033: additional fix
* block/034: add the missing +x mode
* nvme/{003,006,007}: remove the blank line
* block/033: fix the output when ublk prog not avaiable
* block/037: add test to cover blk-cgroup vs. disk rebind
* block/036: test return EIO from BLKRRPART
* block/035: Report IOPS
* block/035: Test shared queue fairness
* scsi/008: Test SCSI disk data lifetime support
* common/fio: Fix the _run_fio() return code
* nvme/rc: fix shellcheck warning SC2086
* nvme/{013,014}: fix device filename
* nvme/011: fix filename path
* nvme/028: drop unused nvmedev
* nvme: don't assume namespace id
* nvme/{041,042,043,044,045,048}: do not pass default host{nqn|id} to _nvme_connect_subsys
* nvme: drop default subsysnqn argument from _nvmet_passthru_target_connect
* nvme: drop default subsysnqn argument from _nvme_passthru_target_{setup|cleanup}
* nvme: drop default subsysnqn argument from _nvme_{connect|disconnect}_subsys
* nvme: drop default trtype argument for _nvmet_passthru_target_connect
* nvme: drop default trtype argument for _nvmet_connect_subsys
* nvme/031: do not open code target setup/cleanup
* nvme/rc: do not cleanup external managed loop device
* nvme/rc: remove unused connect options
* nvme/rc: add nqn/uuid args to target setup/cleanup helper
* nvme/rc: connect subsys only support long options
* nvme/{014,015,018,019,020,023,024,026,045,046}: use long command line option for nvme
* nvme/rc: use long command line option for nvme
* nvme/{012,013,035}: check return value of _xfs_run_fio_verify_io
* common/xfs: propagate errors from _xfs_run_fio_verify_io
* nvme/rc: log error if stale configuration is found
* nvme/rc: silence fcloop cleanup failures
* nvme/rc: silence error on module unload for fc
* nvme/048: make queue count check retry-able
* nvme/048: remove unused argument for set_qid_max
* nbd/001: wait for the device node to show up before running parted
* nvme: Add passthru error logging tests to nvme/039
* nvme/029: reserve hugepages for lager allocations
* nbd/001: change to use lsblk raw output format
-------------------------------------------------------------------
Fri Feb 16 09:07:44 UTC 2024 - Martin Pluskal <mpluskal@suse.com>
- Update to version 0+20240213.ac3d8d0:
* nvme/rc: revert nvme-cli context tracking
* nvme/rc: do not issue errors when disconnecting when using fc transport
* nvme/rc: do not issue warnings on cleanup when using fc transport
* nvme/rc: filter out errors from cat when reading files
* nvme/029: fix local variable declarations
* nvme/046: change nvme io-passthru command option from -o to --opcode
* nvme: add nvme pci timeout testcase
* block/031: allow to run with built-in null_blk driver
* common/null_blk: introduce _have_null_blk_feature
* nvme/rc: don't print the nvme connect msg
* block/007: skip hybrid polling tests when kernel does not support it
* block/011: set default timeout to 20 minutes
* block/011: recover test target devices to online or live status
* loop/009: require --option of udevadm control command
* nvme/{041,042,043,044,045}: check dhchap_ctrl_secret support by nvme-fabrics
* nvme: do not print subsystem NQN to stdout
* nvme: do not print UUID to log files
* common/ublk: allow to run ublk test without building miniublk
* ublk/rc: prefer to rublk over miniublk
* Fix common misspellings from codespell project
* tests/srp: remove the unused file 015.out
* src/miniublk: fix logical block size setting
* block/002: fix TMPDIR path
* nvme/{rc,017,031}: replace def_file_path with _nvme_def_file_path()
* nvme/rc: fix rdma driver check
- Small spec file modernisation
-------------------------------------------------------------------
Wed Oct 11 14:12:41 UTC 2023 - pcervinka@suse.com
- Replace disabled mode in service file by manual mode
- Update to version 0+20231006.1aeff01:
* nbd/004: avoid left connection
* Change the default RDMA driver from rdma_rxe to siw
* srp/015: Remove this test
* tests/srp/rc: Reduce the number of channels
* tests/srp/rc: Rework use_blk_mq()
* tests/nvme/031: fix connecting faiure
* block/002,scsi/007,zbd/003: remove options for shellcheck SC2119
* nvme: introduce nvmet_target_{setup/cleanup} common code
* nvme/{033,034,035,036,37}: drop port handle between passthru target setup and cleanup
* nvme/{033,034,035,036}: use default subsysnqn variable directly
* Revert "Do not suppress any shellcheck warnings"
* nvme: remove "udevadm settle" after _nvme_connect_subsys
* nvme/rc: fix nvme device readiness check after _nvme_connect_subsys
* nvme: Add explicitly host to allow_host list
* nvme/rc: Add helper for adding/removing to allow list
* nvme: Use def_subsys_uuid variable
* nvme/rc: Add common def_subsys_uuid define
* nvme: Use def_file_path variable instead local variable
* nvme/rc: Add common file_path name define
* nvme/{041,042,043,044,045,048}: Remove local variable hostnqn and hostid
* nvme: Use def_subsysnqn variable instead local variable
* nvme/rc: Add common subsystem nqn define
* nvme/043: Use hostnqn to generate DHCAP key
* nvme: Reorganize test preamble code section
* nvme/{003,004,005,013,046,049}: Group all variables declarations
* block/004: reset zones of TEST_DEV before fio operation
* README: clarify motivations to add new test cases
* CONTRIBUTING, README: recommend patch post for contributions
* README: describe what './new' script documents
* new: don't mandate double square brackets
* src/Makefile: fix static linking of miniublk
* common/scsi_debug: Use _unload_module() instead of modprobe -r
* _unload_module(): Report the failure reason once
* block/005: require queue/scheduler sysfs attribute
* block/004, zbd/{005,006}: call _test_dev_set_scheduler
* common/rc: introduce _require_test_dev_sysfs
* common/{rc,dm}: introduce functions to set scheduler of dm destinations
* common/dm: add script file for device-mapper functions
* check, common/rc: save sysfs attribute path
* common/ublk: avoid modprobe failure for built-in ublk_drv
* nvme/{041,042,043,044,045,048}: Use default hostnqn and hostid
* nvme/rc: Avoid triggering host nvme-cli autoconnect
* nvme/048: Check for queue count check directly
* nvme/043: use a valid hostkey
* zbd/009: skip have_good_mkfs_btrfs when mkfs.btrfs not avaiable
* nvme/rc: specify hostnqn and hostid to nvme discover and connect
-------------------------------------------------------------------
Tue Jun 27 10:17:27 UTC 2023 - petr@cervinka.net
- Update to version 0+20230615.154e652:
* block/034: Test memory is released by null-blk driver with memory_backed=1
* nvme/040: Free loop back resources
* block/011: recover test target NVME device capacity
* block/011: skip when mounted block devices are affected
* common/rc: introduce _get_pci_from_dev_sysfs
* nvmeof-mp: Remove nvmeof-mp tests
* nvme/rc: remove _filter_discovery
* nvme/{016,017}: use _check_genctr instead of _filter_discovery
* nvme/rc: Cleanup fc resource before module unloading
* nvme/rc: Cleanup fc ports in reverse order
* tests: Add ublk tests
* src/miniublk: add user recovery
* srp/rc: Replace _have_module() with _have_driver()
* nvme/{016,017}: Make the number iterations configurable
* nvme/{002,030}: Move discovery generation counter code to rc
* nvme/{045,047}: Calculate IO size for random fio jobs
* nvme: Add minimal test image size requirement
* nvme: Make test image size configurable
* Documentation: Add info on nvme_trtype
* nvme/{032,040}: Use runtime fio background jobs
* common/xfs: Limit fio size job to fit into xfs fs
* common/xfs: Make size argument optional for _xfs_run_fio_verify_io
* nvme/{014/015}: Do not hard code device size for dd test
* nvme/rc: Auto convert test device size info
* block/{001,002,027}: allow to run with built-in scsi_debug and sd_mod
* scsi/{004,005}: allow to run with built-in scsi_debug
* common/scsi_debug: introduce _configure_scsi_debug
* common/scsi_debug: factor out _setup_scsi_debug_vars
* common/scsi_debug, tests/*: re-define _have_scsi_debug
* common/rc: skip module file check if modules path does not exist
* loop/009: add test for loop partition uvents
* test/nvme: add missing _have_fio check for nvme/045
* tests/dm: add dm test group and a test for self-map
* common/rc: fix kernel version parse failure
* block/{014,015,030}: don't require modular null_blk for fault-injection
* src/Makefile: forward LDFLAGS to $(CC)
* nvme/039: avoid failure by error message rate limit
* nvme/049: add test for uring-passthrough
* common,fio: helper for version check
* nvme/048: test queue count changes on reconnect
* nvme/rc: Add timeout argument parsing to _nvme_connect_subsys()
* nvme/047: Test different queue types for fabrics transports
* nvme/rc: Add parametric transport required check
* nvme/rc: Add nr queue parser arguments to _nvme_connect_subsys()
* nvme/rc: Parse optional arguments in _nvme_connect_subsys()
* tests/block/013.out: remove the unused 013.out file
* tests: add the missing +x mode
-------------------------------------------------------------------
Sun Apr 02 17:08:00 UTC 2023 - bjorn.lie@gmail.com
- Update to version 0+20230302.676d42c:
* src/Makefile: fix number sign handling in macro
* block/033: add test to cover gendisk leak
* src: add mini ublk source code
* nvme/046: add test for unprivileged passthrough
* check, common/rc: support normal user privilege
* block/032: add test to cover umount one deleted disk
* Update tests for discovery log page changes
* tests/block/007: Rework I/O polling
- Use explicit commit id. Also exclude .gitignore files.
-------------------------------------------------------------------
Wed Dec 02 13:23:00 UTC 2020 - pcervinka@suse.com
- Update to version 0+20201022.e10add0:
* nvme/038: Test removal of un-enabled subsystem and ports
* nvme/037: Add test which loops passthru connect and disconnect
* nvme/036: Add test for testing reset command on nvme-passthru
* nvme/035: Add test to verify passthru controller with a filesystem
* nvme/034: Add test for passthru data verification
* nvme/033: Simple test to create and connect to a passthru target
* nvme: Add common helpers for passthru tests
* nvme: Search for specific subsysnqn in _find_nvme_loop_dev
* common/xfs: Create common helper to verify block device with xfs
* common/xfs: Create common helper to check for XFS support
* common/fio: Remove state file in common helper
* zbd/003: Reset zones when the test device has max_active_zones limit
* block/004: Provide max_active_zones to fio command
* common/rc: Add _test_dev_max_active_zones() helper function
* nvme: support rdma transport type
* common: move module_unload to common
* nvme: support nvme-tcp when runinng tests
* tests/nvme: restrict tests to specific transports
* nvme: make tests transport type agnostic
* nvme: consolidate some nvme-cli utility functions
* nvme: consolidate nvme requirements based on transport type
* nvme/005: add the missing _have_program nvme
* common/multipath-over-rdma: make block scheduler directory optional
* zbd/002: Check write pointers only when zones have valid conditions
* zbd/005: Enable zonemode=zbd when zone capacity is less than zone size
* zbd/004: Check zone boundary writes using zones without zone capacity gap
* zbd/002: Check validity of zone capacity
* zbd/rc: Support zone capacity report by blkzone
* Remove partition rereading tests for reverted fixes
* tests/srp/rc: Separate login parameters with a comma
* srp tests: Use _{init,exit}_scsi_debug() instead of duplicating these functions
* common/multipath-over-rdma: Log mkfs output
* srp, nvmeof-mp: Use no_path_retry instead of queue_if_no_path
* tests/nvmeof-mp/rc: Make login failures easier to debug
* block/012: add comment explaning second --setro
* tests/srp/rc: Fix a shellcheck warning
* tests: mark tests with CAN_BE_ZONED=1
* common/cpuhotplug: fix ALL_CPUS
* tests/srp/rc: Do not pass an empty string to dd
* zbd/007: Add --force option to blkzone reset
* Fix ./check: line 275: LAST_TEST_RUN["$key"]: unbound variable
* Fix unquoted integer shellcheck errors
* travis: update shellcheck URL
* tests/srp/rc: Make the SRP tests pass against kernel v5.7
-------------------------------------------------------------------
Fri May 1 08:48:32 UTC 2020 - Petr Cervinka <pcervinka@suse.com>
- Update to version 0+20200430.bff70b0:
* Add $DESCRIPTION to the TEST_RUN
* Fix unintentional skipping of tests
* Add a test that triggers the blk_mq_realloc_hw_ctxs() error path
* Introduce the function _configure_null_blk()
* Use _{init,exit}_null_blk instead of open-coding these functions
* Make _exit_null_blk remove all null_blk device instances
* common/fio: do not use norandommap with verify
-------------------------------------------------------------------
Thu Apr 2 10:20:32 UTC 2020 - Sebastian Chlad <sebastian.chlad@suse.com>
- Add blktrace to recommended as some tests require it
-------------------------------------------------------------------
Wed Mar 25 13:20:26 UTC 2020 - pcervinka@suse.com
- Update to version 20200307.cd11d00:
* Support skipping tests from test{,_device}()
* Show last run for skipped tests
* Skip tests based on SKIP_REASON, not return value
* nbd/003: fix compiling error with gcc version 4.8.5
* nbd/003:add mount and clear_sock test for nbd
* nvme/018: Reword misleading error message
* nvme/018: Ignore message generated by nvme read
* tests/srp/015: Add a test that uses the SoftiWARP (siw) driver
* common/multipath-over-rdma, tests/srp: Make it easy to use siw instead of rdma_rxe
* common/multipath-over-rdma: Rename two functions
- Apply spec-cleaner
- Change version format in service file
- Add GPL-3.0 to license list
- Add README.md to doc section
-------------------------------------------------------------------
Thu Oct 17 14:44:14 UTC 2019 - Richard Brown <rbrown@suse.com>
- Remove obsolete Groups tag (fate#326485)
-------------------------------------------------------------------
Sun Nov 25 16:42:01 UTC 2018 - Jan Engelhardt <jengelh@inai.de>
- Move /var/lib/blktests to /usr/lib/blktests, packages don't
deliver variadic data.
-------------------------------------------------------------------
Thu Nov 22 15:56:30 UTC 2018 - Michael Moese <mmoese@suse.com>
- Fix package dependencies: nvmetcli is not needed, some packages
can be missing (changed to Recommended:)
-------------------------------------------------------------------
Thu Nov 22 09:50:56 UTC 2018 - Michael Moese <mmoese@suse.com>
- fix the %files section: change %{_sharedstatedir} to %{_localstatedir}/lib
-------------------------------------------------------------------
Thu Nov 22 09:46:35 UTC 2018 - Michael Moese <mmoese@suse.com>
- change %{_sharedstatedir} to %{_localstatedir}/lib
-------------------------------------------------------------------
Thu Nov 22 09:33:46 UTC 2018 - Michael Moese <mmoese@suse.com>
- Correct the package category, System/Benchmarks is wrong
-> System/Benchmark
-------------------------------------------------------------------
Thu Nov 22 09:20:45 UTC 2018 - Michael Moese <mmoese@suse.com>
Move the installed files from /usr/share to /var/lib
-------------------------------------------------------------------
Thu Nov 22 09:06:32 UTC 2018 - Michael Moese <mmoese@suse.com>
move the installed files from /usr/local to /usr/share
-------------------------------------------------------------------
Wed Nov 21 14:55:39 UTC 2018 - Michael Moese <mmoese@suse.com>
- clean the .spec
-------------------------------------------------------------------
Wed Nov 21 14:32:02 UTC 2018 - Michael Moese <mmoese@suse.com>
- fix the group of the package
-------------------------------------------------------------------
Wed Nov 21 14:11:48 UTC 2018 - Michael Moese <mmoese@suse.com>
- Add the blktests.spec file
-------------------------------------------------------------------
Wed Nov 21 14:08:33 UTC 2018 - Michael Moese <mmoese@suse.com>
Add new package for "blktests", the linux block layer testing framework
from https://github.com/osandov/blktests
-
