File brickv.changes of Package brickv
-------------------------------------------------------------------
Tue Nov 9 19:00:57 UTC 2021 - Frank Kunz <mailinglists@kunz-im-inter.net>
- Update to new upstream version 2.4.20
- Hide unused custom line ending controls in hex mode in RS485 Bricklet plugin
- Reuse thread in Data Logger timer to avoid slow memory leak
- Fix Data Logger device list clearing on config loading
- Fix slow memory leak in Data Logger data tab
- Add firmware version column to Health Monitor dialog
- Improve udev rule compatibility on Linux
- Add support for RTC driver config to HAT Brick plugin
- Add support for simple mode to NFC Bricklet plugin
- Increase required PySerial version to 3.0
- Add support for flashing ESP32 (Ethernet) Bricks
- remove upstream patch 0001-udev-rules-Fix-ATTR-assignment.patch
-------------------------------------------------------------------
Tue Sep 7 19:23:04 UTC 2021 - Frank Kunz <mailinglists@kunz-im-inter.net>
- Fix shebang
- Add patch to fix udev rule warning
0001-udev-rules-Fix-ATTR-assignment.patch
-------------------------------------------------------------------
Fri May 14 20:33:11 UTC 2021 - Frank Kunz <mailinglists@kunz-im-inter.net>
- Update to new upstream version 2.4.19:
- Add support for DC 2.0, Industrial PTC and Silent Stepper Bricklet 2.0
- Add Data Logger support for DC 2.0, Industrial PTC and Silent Stepper Bricklet 2.0
- Fix Healthmonitor error handling
- Filter Updates/Flashing and RED Brick Console serial port selection based on
USB product- and vendor-ID
version 2.4.18:
- Add minimal health monitor dialog
- Fix state handling for untabbed plugins
- Force correct UI state after aborting autoreconnect on error
- Handle errors while opening Data Logger debug log file
- Update download.tinkerforge.com certificate chain to fix update autodetection
- Autoselect download directory for Brick Viewer downloads
- Check if NFC Bricklet is in correct state to start cardemu discovery
-------------------------------------------------------------------
Wed Jan 20 21:22:02 UTC 2021 - Frank Kunz <mailinglists@kunz-im-inter.net>
- Adapt build recipe to python 3 parallel installation support
- Update to new upstream version 2.4.17:
- Add support for Performance DC Bricklet and Servo Bricklet 2.0
-------------------------------------------------------------------
Thu Dec 10 20:23:38 UTC 2020 - Frank Kunz <mailinglists@kunz-im-inter.net>
- Update to new upstream version 2.4.16:
- Add support for IMU Bricklet 3.0 and Industrial Dual AC Relay Bricklet
- Improve error handling and reporting
- Support running on integrated GPU on macOS
- Reduce Qt requirement to 5.11 to fix crash on macOS
-------------------------------------------------------------------
Thu Aug 20 12:22:23 UTC 2020 - Frank Kunz <mailinglists@kunz-im-inter.net>
- Update to new upstream version 2.4.14:
- Fix monoflop handling to cover full uint32 duration range
- Better indicate disconnected state
- Highlight timeout error counter > 0 in bold red
- Fix slider/spinbox mismatch on auto-reconnect in DC Brick plugin
- Avoid UI jumps on value changes in Energy Monitor Bricklet plugin
- Add extra checkbox to avoid accidental port number changes
- Handle all errors while downloading firmware updates
version 2.4.13:
- Fix race condition in RED Brick program state tracking
- Report actual cause for connection errors
- Don't reset RED Brick tab on every enumerate callback (fixes tab reset on
selecting the Server Monitoring tab)
- Ensure that all dialogs have proper close buttons
- Fix close buttons for for detached tabs
- Fix race condition in RED Brick overview sorting
-------------------------------------------------------------------
Wed Aug 19 08:28:08 UTC 2020 - Dominique Leuenberger <dimstar@opensuse.org>
- Use proper %{_udevrulesdir} instead of (wrong)
%{_libexecdir}/udev/rules.d.
-------------------------------------------------------------------
Wed Mar 25 09:01:06 UTC 2020 - Bernhard Wiedemann <bwiedemann@suse.com>
- Update to new upstream version 2.4.12:
- make build reproducible (boo#1041090)
- Fix Server Monitoring support for Ambient Light 3.0 and IO-4 Bricklet 2.0
- Fix WIFI Extension 2.0 no-encryption configuration
- Add checkbox for setting the WIFI Extension 2.0 mesh password, old password is
not shown anymore
- Improve firmware update error handling
- Fix RS485 Bricklet Modbus slave logic for write-multiple-registers function
- Improve RS485 Bricklet input field history handling
- Fix Data Logger support for Color Bricklet 2.0
- Improve corner case handling in enumerate callback logic
- Fix error handling for RED Brick file upload
- Fix maximum number of LEDs for LED Strip Bricklet 2.0
- Show milliseconds in GPS Bricklet 2.0 timestamp
-------------------------------------------------------------------
Sun Jan 5 11:00:43 UTC 2020 - Frank Kunz <mailinglists@kunz-im-inter.net>
- Update to new upstream version 2.4.11:
- Make Thermal Imaging Bricklet image view detachable
- Fix firmware auto-update for Co-MCU Bricklets
- Avoid potential config file writing collision between two Brick Viewer
instances on Linux and macOS
- Notarize Brick Viewer app to make it ready for macOS 10.15
- Fix potential crash in WIFI Extension 2.0 firmware update detection logic
- Fix exception hook for Python 3.8
- Prefer hPa over mbar and Tesla over Gauss
- Add Data Logger support for RS232 Bricklet 2.0 data reading
- Add Server Monitoring support for Humidity Bricklet 2.0 temperature value
- Lower Hardened Runtime restrictions to make ctypes work again on macOS
- Fix encoding issues in Server Monitoring script
- remove integrated upstream patches
0001-Support-to-use-local-iso-codes-and-mobile-providers-.patch
0002-Fix-shebang.patch
-------------------------------------------------------------------
Mon Oct 14 17:08:20 UTC 2019 - Frank Kunz <mailinglists@kunz-im-inter.net>
- fix review comment to use full path for source location
- fix review comment to remove buildroot and defattr
-------------------------------------------------------------------
Mon Sep 30 18:00:37 UTC 2019 - Frank Kunz <frank@kunz-im-inter.net>
- added doc files
-------------------------------------------------------------------
Mon Sep 30 13:48:52 UTC 2019 - Frank Kunz <frank@kunz-im-inter.net>
- Remove shebang from files where not needed
(0002-Fix-shebang.patch)
- Add support to overwrite iso codes and local providers
(0001-Support-to-use-local-iso-codes-and-mobile-providers-.patch)
- Force UTF-8 for build scripts
- Switch off source service
-------------------------------------------------------------------
Sat Sep 28 10:40:10 UTC 2019 - Frank Kunz <frank@kunz-im-inter.net>
- install udev rule
- install desktop file
-------------------------------------------------------------------
Sat Sep 28 09:01:17 UTC 2019 - Frank Kunz <frank@kunz-im-inter.net>
- fix install command
-------------------------------------------------------------------
Sat Sep 28 08:28:50 UTC 2019 - Frank Kunz <frank@kunz-im-inter.net>
- use mobile providers list and iso codes provided by the distribution
(0001-SUSE-Use-local-providers-and-iso-codes.patch)
- add requied python packages dependencies
- use fdupes macro for cleanup duplicated files
-------------------------------------------------------------------
Wed Sep 25 16:47:31 UTC 2019 - Frank Kunz <frank@kunz-im-inter.net>
- intial version 2.4.9
