File tlp.changes of Package tlp
-------------------------------------------------------------------
Mon Sep 25 14:01:42 UTC 2023 - Shung-Hsi Yu <shung-hsi.yu@suse.com>
- Update to 1.6.1 18.09.2023
* Bugfixes:
Battery:
- LG Gram laptops: ensure lg-legacy is used for kernel <= 5.17 (Issue #708)
General:
- tlp-stat -s: report manual mode despite restrictive umask (Issue #702)
-------------------------------------------------------------------
Fri Sep 15 11:44:51 UTC 2023 - Shung-Hsi Yu <shung-hsi.yu@suse.com>
- Update to 1.6.0 24.08.2023
* Features
Battery:
- LG Gram laptops:
- Use standard sysfs attribute 'charge_control_end_threshold'
provided by kernel 5.18 and newer
- Restore threshold after hibernate
- System76 laptops with open source EC firmware:
start and stop threshold
- System76: default start threshold set to 90% (due to EC firmware change)
- ThinkPads: model detection adapted for Libreboot (Issue #679)
- Toshiba/Dynabook laptops: stop threshold 80/100%
Configuration:
- Allow comments (#) after parameters (Issue #598)
- tlp-stat -c/--cdiff: append a notice to deprecated or removed
parameters
Disks:
- SATA_LINKPWR_ON_AC/BAT: remove fallbacks for outdated kernels
before 4.15 from defaults (still available via explicit configuration)
General:
- Allow coexistence with power-profiles-daemon: do not apply
PLATFORM_PROFILE_ON_AC/BAT, CPU_ENERGY_PERF_POLICY_ON_AC/BAT and
CPU_BOOST_ON_BAT/BAT when it is running
- MEM_SLEEP_ON_AC/BAT: change system suspend mode
- Add ZSH command completion
- tlp-stat -s:
- Silence warnings about unmasked systemd-rfkill.service/.socket
when DEVICES_TO_ENABLE/DISABLE_ON_STARTUP is actually unconfigured
- Show EC firmware version
- Show system suspend mode
- Show proper ThinkPad model string with Libreboot (Issue #679)
PCI(e) devices:
- RUNTIME_PM_ENABLE/DISABLE: apply even when RUNTIME_PM_ON_AC/BAT
is disabled (Issue #614)
Processor:
- CPU_DRIVER_OPMODE_ON_AC/BAT: set CPU scaling driver operation mode
(active, guided, passive); amd-pstate/intel_pstate driver required
- CPU_DRIVER_OPMODE_ON_AC/BAT: check if operation mode is actually
supported by the current CPU driver
- CPU_ENERGY_PERF_POLICY_ON_AC/BAT: support AMD Zen 2 or newer CPUs;
kernel 6.3 with amd-pstate driver in active mode required
- CPU_HWP_DYN_BOOST_ON_AC/BAT: *EXPERIMENTAL* support AMD Zen 2 or
newer CPUs; yet unreleased kernel 6.x and amd-pstate driver
in active mode required
- SCHED_POWERSAVE_ON_AC/BAT removed (unavailable since kernel 3.5)
- tlp-stat -p:
- Show amd-pstate operation mode, dynamic boost and performance
attributes
- Show min/max operating frequency the processor can run at
(cpuinfo_min/max_freq) and limit imposed by the BIOS (bios_limit)
- (-v) Show acpi_cppc performance and frequency attributes
Radio Devices:
- Support Thunderbolt docks to switch radio devices
- DEVICES_TO_ENABLE/DISABLE_ON_SHUTDOWN: *DEPRECATED* feature will be
removed in TLP 1.7
USB:
- USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN: *DEPRECATED* feature will be
removed in TLP 1.7
* Bugfixes
Configuration:
- Strip trailing blanks from unquoted parameter values
Operation:
- Deactivate AHCI_RUNTIME_PM and PCIE_ASPM before suspend to avoid
resume freezes (Issue #593, #606, #698)
Processor:
- Set governor although not listed in scaling_available_governors
- Revert moving 99tlp-rdw-nm from user specific directory since 1.6.0 installs
it to vendor specific directory /usr/lib/NetworkManager/dispatcher.d
-------------------------------------------------------------------
Mon May 23 09:47:56 UTC 2022 - Ferdinand Thiessen <rpm@fthiessen.de>
- Fix SourceURL (misplaced space) for Factory submission
-------------------------------------------------------------------
Wed May 18 16:15:17 UTC 2022 - Stefan Schubert <schubi@suse.de>
- Moved 99tlp-rdw-nm from user specif directory
/etc/NetworkManager/dispatcher.d to vendor specific directory
/usr/lib/NetworkManager/dispatcher.d. So, users changes can
still be done in /etc and will not be overwritten by an update.
-------------------------------------------------------------------
Fri Apr 18 13:35:05 UTC 2022 - popov895@ukr.net
- Due to conflicts with rfkill, we need to additionally mask the systemd-rfkill.socket
- Update to 1.5.0 07.01.2022
- * Features
Battery:
- Sony laptops: stop threshold 50/80/100% aka "battery care limiter"
- ThinkPads:
- Use new sysfs attribute 'charge_behaviour' for recalibration
- Support T400 running coreboot via natacpi (Issue #601)
- tlp-stat -b: display "cycle_count = 0" with the note "or not supported"
Radio Devices:
- Add support for switching NFC devices
- Remove support for wireless-tools (iwconfig)
- * Bugfixes
tlp-stat:
- drop PM_RUNTIME=y kernel config recommendation
Battery:
- ASUS laptops: apply stop threshold reliably on boot and after hibernate
(Issue #589)
Disks:
- tlp-stat -d: display correct sysfs path for disk runtime pm:
/sys/block/<DISK>/device/power/control (Issue #606)
-------------------------------------------------------------------
Tue Dec 28 10:04:15 UTC 2021 - lars@linux-schulserver.de - 1.4.0
- package bash completions for tlp-rdw in the corresponding
sub-package (bsc#1180496)
- add tlp-rpmlintrc to mark some rpmlint warnings as known good
- Fix bsc#1181279, bsc#1179635, bsc#1177313 - Failed to preset
unit: Unit file tlp-sleep.service does not exist.
- As tlp somehow conflicts with rfkill and power-profiles-daemon
running at the same time, lets mask these services, when tlp is
installed. ...and obviously unmask them again on uninstall.
- Require at least NetworkManager >= 1.20
- define _udev(,rules)dir, if not already set (for Leap)
- Pre-Require systemd (and BuildRequire systemd-rpm-macros) for
completeness
- tlp is not activated per default (bsc#1183235), as it may conflict
with other Laptop mode tools. At the moment, users have to manually
activate the service via 'sudo systemctl enable --now tlp.service'
-------------------------------------------------------------------
Thu Nov 11 09:15:25 UTC 2021 - Mikael S <mikaels@iki.fi>
- Update to 1.4.0 24.09.2021
- * Features
Audio:
- SOUND_POWER_SAVE_ON_AC: change default to enabled (Issue #495)
Battery:
- "Battery Features" renamed to "Battery Care"
- Introduce plugins to support Battery Care for non-ThinkPads:
- ASUS laptops: stop threshold
- Huawei MateBooks: start and stop threshold
- LG Gram laptops: stop threshold at 80% aka "battery care limit"
- Lenovo laptops: stop threshold at 60% aka "battery conservation mode"
- Samsung laptops: stop threshold at 80% aka "battery life extender"
- ThinkPads
- Allow deactivation of the start threshold (START_CHARGE_THRESH_BATx=0)
- Discharge malfunction: hint to check battery and charger
- Use standard sysfs attributes for charge thresholds
(Issue #513)
- Flag ThinkPad L512 as "unsupported"
- Validate charge threshold configuration, don't fail silently
- tlp-stat -b
- Battery Care: show plugin, supported features, driver usage and
related kernel module(s)
- Map battery state "Unknown" to "Idle" for clarity
Configuration:
- tlp-stat --cdiff: show configuration differing from defaults
- PARAMETER+="add values": append values to a parameter already defined
as intrinsic default or in a *previously* read file (Issue #457)
- TLP_WARN_LEVEL: warn about invalid settings, configurable for background
tasks and command line
- Rename parameters (backwards compatible to legacy config files):
SATA_LINKPWR_BLACKLIST -> SATA_LINKPWR_DENYLIST
RUNTIME_PM_BLACKLIST -> RUNTIME_PM_DENYLIST
RUNTIME_PM_DRIVER_BLACKLIST -> RUNTIME_PM_DRIVER_DENYLIST
USB_BLACKLIST -> USB_DENYLIST
USB_BLACKLIST_BTUSB -> USB_EXCLUDE_BTUSB
USB_BLACKLIST_PHONE -> USB_EXCLUDE_PHONE
USB_BLACKLIST_PRINTER -> USB_EXCLUDE_PRINTER
USB_BLACKLIST_WWAN -> USB_EXCLUDE_WWAN
USB_WHITELIST -> USB_ALLOWLIST
Disks:
- AHCI_RUNTIME_PM_ON_AC/BAT:
- Works only on disks defined in DISK_DEVICES
- Works on NVMe (new), SATA/ATA and plugged in USB (new) disks
- Works on SATA ports
- No longer experimental i.e. now enabled by default; the previously
existing risk of system freezes (and data loss) with the multiqueue
scheduler is now eliminated:
- Kernel >= 4.19 itself locks unsafe disk runtime pm
- TLP generally locks it for kernel < 4.19
- DISK_APM_CLASS_DENYLIST: exclude disk classes from APM, i.e. you may
now activate it for USB and IEEE1394 drives (Issue #523)
- DISK_APM_LEVEL_ON_AC/BAT, DISK_SPINDOWN_TIMEOUT_ON_AC, DISK_IOSCHED:
now also work when plugging in USB disks; provided disk is contained in
DISK_DEVICES and 'usb' is removed from DISK_APM_CLASS_DENYLIST
- tlp-stat -d
- Explain why AHCI_RUNTIME_PM is locked for a disk
- Show disks attached to SATA links/ports
- Show a disk's host (for SATA_LINKPWR_DENYLIST)
- Show ALPM state in the sysfs directory of the AHCI host
- Show IDs for all disks configured in DISK_DEVICES
- Distinguish SATA from ATA(IDE) disks
- Show NVMe disk temperature
General:
- power-profiles-daemon: issue error messages about conflicting service
- tlp-stat -s: determine OS release without the lsb_release utility
Graphics:
- Add support for amdgpu (Issue #498)
- Improve powerdown of unused GPUs with drivers amdgpu, nouveau,
nvidia and without driver (Issues #488, #495, #498)
- tlp-stat -g:
- List all GPUs with at least the driver info
- Show hybrid graphics switch state (switcheroo)
- Intel GPU:
- Show hardware min/max frequency instead of
list of available frequencies (kernel change)
- Show more informative RC6, FBC and PSR status where available
(Issue #203)
Operation Mode AC/BAT:
- Speed up system shutdown/suspend by not applying AC settings anymore
- TLP_PS_IGNORE: add USB; allow to ignore multiple power supply classes
- tlp-stat -s: speed up power source detection
- tlp-stat --psup/udev: check if udev rules for power source changes and
connecting USB devices are active
PCI(e) devices:
- RUNTIME_PM_ENABLE/DISABLE: permanently enable/disable runtime PM for
PCI(e) devices based on address (independent of the power source)
- RUNTIME_PM_DENYLIST: remove amdgpu, nvidia, pcieport from defaults
- tlp-stat -e -v: show device runtime_status
Platform:
- PLATFORM_PROFILE_ON_AC/BAT: select platform profile to control system
operating characteristics around power/performance levels, thermal
and fan speed
- tlp-stat -p: show state of ThinkPad lapmode
Processor:
- CPU_HWP_DYN_BOOST_ON_AC/BAT: Intel CPU HWP dynamic boost (Issue #468)
- Remove backwards compatibility of CPU_ENERGY_PERF_POLICY_ON_AC/BAT with
ENERGY_PERF_POLICY_ON_AC/BAT to prevent performance issues caused by the
value 'power' in legacy configurations
- PHC_CONTROLS removed (obsolete)
- tlp-stat -p:
- cpu1..cpuN omitted for clarity, use -v to show all
- Sort more than 10 CPU cores in proper numerical order
- Show intel_pstate operation mode ("status")
- Omit "EPB: unsupported" for AMD or non-intel_pstate CPUs
USB:
- USB_EXCLUDE_AUDIO: exclude audio devices from autosuspend (Issue #556)
- tlp-stat -u -v: show device runtime_status
-------------------------------------------------------------------
Mon Nov 8 09:52:55 UTC 2021 - Fabian Vogt <fvogt@suse.com>
- Don't recommend bbswitch, there's no relation to tlp (boo#1190631)
-------------------------------------------------------------------
Wed Oct 6 12:14:34 UTC 2021 - Fabian Vogt <fvogt@suse.com>
- tlp-sleep.service does not exist anymore
- Make %files section a bit more precise
-------------------------------------------------------------------
Thu Jun 17 11:59:16 UTC 2021 - Stanislav Brabec <sbrabec@suse.com>
- Recommend bbswitch for ThinkPad battery charge control instead of
acpi-call or tp-smapi not present in the distribution.
-------------------------------------------------------------------
Mon Jan 4 10:00:03 UTC 2021 - Dominique Leuenberger <dimstar@opensuse.org>
- Use the same value for TLP_ULIB in the %build phase and the
%install phase (boo#1180495):
+ BuildRequire pkgconfig(udev)
+ Use pkg-config --variable udev_dir udev for the value of
TLP_ULIB.
-------------------------------------------------------------------
Fri Oct 9 08:58:46 UTC 2020 - Dominique Leuenberger <dimstar@opensuse.org>
- Properly install udev files to /usr/lib/udev, NOT /usr/libexec
(boo#1177313).
-------------------------------------------------------------------
Fri Feb 7 08:07:22 UTC 2020 - Paolo Stivanin <info@paolostivanin.com>
- Update to 1.3.1
* default CPU_ENERGY_PERF_POLICY_ON_BAT=power too aggressive (issue#460)
-------------------------------------------------------------------
Tue Feb 4 13:29:00 UTC 2020 - Paolo Stivanin <info@paolostivanin.com>
- Update to 1.3.0
* New configuration scheme
- /etc/default/tlp is replaced by /etc/tlp.conf
- Settings are read in the following order:
- 1. Intrinsic defaults
- 2. /etc/tlp.d/*.conf - Drop-in customization snippets
- 3. /etc/tlp.conf - User configuration
- In case of identical parameters, the last occurence has precedence
- Parse config files instead of sourcing --> no more shell expansion
* Battery Features, tlp-stat -b
- Charge thresholds: better checks for command line and configuration; clearer error messages
- tlp discharge: error message "check your hardware" when battery wasn't completely discharged (Issue #438)
- Distinguish between "no kernel support" for natacpi (< 4.17) and "laptop not supported" (>= 4.17)
- Supplement battery status "Unknown" with "threshold may prevent charging" when thresholds are available only
* General
- systemd: replace tlp-sleep.service with /lib/systemd/system-sleep/tlp
* Operation Mode AC/BAT
- TLP_PS_IGNORE: power supply class to ignore when determining operation mode; workaround for laptops reporting incorrect AC or battery status (Issue #446)
* PCI(e) devices
- PCIE_ASPM_ON_AC/BAT: add method 'powersupersave' (Issue #425)
* Processor
- CPU_ENERGY_PERF_POLICY_ON_AC/BAT: backward compatible merge of settings for Intel energy vs. performance policies EPB (ENERGY_PERF_POLICY_ON_AC/BAT) and HWP.EPP (CPU_HWP_ON_AC/BAT); when HWP.EPP is available, EPB is not set; validate parameters; eliminate external tool x86_energy_perf_policy for kernel >= 5.2
* tlp-stat
- Configuration: show file where the parameter comes from
- System Info:
Show SELinux status
Show RDW as 'disabled' when TLP is disabled as a whole
Indicate persistent mode
- Intel CPU: don't show EPB values when HWP.EPP is active (see above)
- PCIe ASPM: show available policies
- Undervolting: remove "PHC kernel not available" message
* Battery Features
- Issue #415: ThinkPad X240 discharge BAT1 malfunction when BAT0 is not installed
* Disks
- Fix NVMe detection on Linux 4.15
* tlp-stat
- Issue #430: ignore HID device batteries
-------------------------------------------------------------------
Sun Jun 2 17:57:53 UTC 2019 - Jan Engelhardt <jengelh@inai.de>
- Use noun phrase in summary.
-------------------------------------------------------------------
Sun May 19 14:35:37 UTC 2019 - Alexei Sorokin <sor.alexei@meowr.ru>
- Update to version 1.2.2:
* Battery Features, tlp-stat -b:
- Show data for batteries named other than BAT0/BAT1
(non-ThinkPads).
- ThinkPad X1C6 discharge malfunction (gh#linrunner/TLP#395).
- Separate checks for charge thresholds and recalibration.
- Intelligible recommendation for tp-smapi on
ThinkPad X220/T420 et al.
- Explain "Battery Features: Charge Thresholds and Recalibrate".
* Discs:
- Fix type determination.
* Operation Mode AC/BAT:
- MacBookPro 5.3: Workaround for false AC offline status.
* Processor, tlp-stat -p:
- Fix read of /sys/devices/system/cpu/cpufreq/boost.
- x86_energy_perf_policy: Detect unsupported CPUs in newer
versions.
* Radio Devices:
- Make RESTORE_DEVICE_STATE_ON_STARTUP=1 persistent again
(gh#linrunner/TLP#404).
-------------------------------------------------------------------
Wed Mar 18 18:10:25 UTC 2019 - Alexei Sorokin <sor.alexei@meowr.ru>
- Update to version 1.2.1:
* Fix unknown command "chargeonce" (gh#linrunner/TLP#391).
- Change from %systemd_requires to %systemd_ordering
-------------------------------------------------------------------
Wed Mar 13 18:14:03 UTC 2019 - sor.alexei@meowr.ru
- Update to version 1.2:
* Disc drives:
- Support for NVMe devices.
- Support for removable drives e.g. USB / IEE1394 devices.
- Improve support for multi queue I/O schedulers (blk-mq).
* General:
- tlp bat/ac: Keep manual power settings until tlp start
(gh#linrunner/TLP#349).
- Remove all pm-utils scripts (gh#linrunner/TLP#363).
- tlp/tlp-stat: Temporarily overwrite configuration for one
programme invocation only: -- PARAM=value ...
- Document intrinsic defaults in config file
(gh#linrunner/TLP#353).
- Code verified with ShellCheck.
* Graphics:
- INTEL_GPU_MIN_FREQ_ON_AC/BAT, INTEL_GPU_MAX_FREQ_ON_AC/BAT,
INTEL_GPU_BOOST_FREQ_ON_AC/BAT: Intel GPU frequency limits.
* Radio Devices:
- tlp-rdw: New command to disable RDW actions temporarily
(until reboot).
- Support ThinkPad Pro Dock CS18 (17ef:306f).
- USB_BLACKLIST_WWAN: Disable by default.
- Retire compatibility with Network Manager 0.9.8.
* PCI(e) devices:
- RUNTIME_PM_BLACKLIST: Add mei_me, pcieport.
* ThinkPad Battery:
- New native kernel API for battery features "natacpi",
requires kernel 4.17; enabled by default
(gh#linrunner/TLP#321).
- NATACPI_ENABLE, TPACPI_ENABLE, TPSMAPI_ENABLE: Make all
battery feature drivers switchable.
- tlp discharge/recalibrate: Exclude multiple simultaneous
invocations.
- Support ThinkPad 25, *80 (Coffee Lake) and all newer models.
* tlp-stat:
- Check systemd-rfkill.socket masked status.
- Drives: Show all configured devices (consider default).
- Intel GPU: Show frequency limits and available frequencies.
- Rename "Suggestions" section to "Recommendations".
- Remove invocation via "tlp stat".
* USB:
- Exclude scanners managed by libsane from autosuspend.
- Remove long deprecated level/autosuspend attributes.
* Bugfixes
- Do not try to start NetworkManager (systemd)
(gh#linrunner/TLP#193).
- get_disk_dev logic is not compatible with NVMe devices
(gh#linrunner/TLP#319).
- AC mode not detected with USB charger (gh#linrunner/TLP#320).
- Process "/usr/bin/tlp auto" failed with exit code 4
(gh#linrunner/TLP#331).
- zsh parse error in tlp diskid (gh#linrunner/TLP#332).
- Circumvent broken AC/charger detection (gh#linrunner/TLP#343,
gh#linrunner/TLP#362, gh#linrunner/TLP#375).
- Keep ASPM default to enable deeper C-states on AC
(gh#linrunner/TLP#344).
- Fix writing sequence for start/stop charge thresholds
(gh#linrunner/TLP#356).
- Recognise Think*p*ad P50 (gh#linrunner/TLP#368).
- tlp-stat: filter HWP lines from x86_energy_perf_policy output
-------------------------------------------------------------------
Wed Jan 24 20:34:07 UTC 2018 - sor.alexei@meowr.ru
- Update to version 1.1:
* Disc drives:
- SATA_LINKPWR_ON_AC/BAT: Try multiple values to support the
new recommended ALPM policy "med_power_with_dipm" in
Linux 4.15.
* Processor:
- ENERGY_PERF_POLICY_ON_AC/BAT: Support changed values:
performance, balance-performance, default, balance-power,
power (gh#linrunner/TLP#297).
* ThinkPad Battery:
- Support ThinkPad 13 1st & 2nd Gen, E130;
new tpacpi-bat version.
- tlp-stat --psup: Show ASLbase for tpacpi-bat (in device/path).
- tlp discharge: Show state of the battery and force_discharge.
* USB:
- USB_BLACKLIST_PRINTER: Exclude printers from autosuspend.
* Bugfixes:
- Intercept the link_power_management_policy write error
(gh#linrunner/TLP#271).
- Fix AC power detection for MacBook Pro 2017
(gh#linrunner/TLP#283).
- Move runtime data from /var/run/tlp to /run/tlp
(gh#linrunner/TLP#298).
- Fix DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth" not
working as expected (gh#linrunner/TLP#301).
- Do not detect wireless input devices batteries as power
supply (gh#linrunner/TLP#313).
- Remove tlp-1.0-run-mount.patch: fixed upstream.
-------------------------------------------------------------------
Sun Nov 26 12:10:33 UTC 2017 - sor.alexei@meowr.ru
- Add tlp-1.0-run-mount.patch: Move runtime data from /var/run/tlp
to /run/tlp (boo#1058983)
-------------------------------------------------------------------
Fri May 26 10:10:52 UTC 2017 - sor.alexei@meowr.ru
- Update to version 1.0:
* General:
- TLP_PERSISTENT_DEFAULT: Use TLP_DEFAULT_MODE regardless of
the actual power source.
* Device Bays:
- BAY_POWEROFF_ON_AC: Power off optical drive not only on bat
(gh#linrunner/TLP#243)
* Graphics:
- RUNTIME_PM_DRIVER_BLACKLIST: When unconfigured default to
"amdgpu nouveau nvidia radeon"; driver default control=auto
allows PRIME/Bumblebee to turn the dGPU off and prevents
accidential power-on during boot as well.
- Exclude Nvidia dGPU from runtime power management even when
no driver is associated (improve compatibility with
Bumblebee).
* PCI(e) devices
- RUNTIME_PM_ALL removed (default to RUNTIME_PM_ALL=1
internally).
* Processor:
- CPU_HWP_ON_AC/BAT: HWP energy performance hints; needs
Linux 4.10 and Intel Skylake CPU or newer, intel_pstate only.
* ThinkPad Battery:
- RESTORE_THRESHOLDS_ON_BAT: Restore charge thresholds on
battery.
- Detect ThinkPad *70 models.
- Detect ThinkPad 13 (1st and 2nd Gen) as unsupported
(gh#linrunner/TLP#227).
- Change texts "ThinkPad (extended) battery functions" to
"ThinkPad battery features".
- tlp-stat:
+ Show "Charge total %" when more than one battery is
present.
+ Show battery temperature (tp-smapi only).
+ Show "unsupported" instead of "not installed" for tp-smapi
incapable hardware.
* USB:
- USB_BLACKLIST_BTUSB: exclude bluetooth devices from
autosuspend (gh#linrunner/TLP#239).
- USB_BLACKLIST_PHONE: exclude phone devices from
autosuspend (gh#linrunner/TLP#188).
* tlp-stat:
- -g|--graphics: Show graphics card data only.
- i915: Explain enable_psr modes.
- --psup: show power supply diagnostic.
- SMART attribute G-Sense_Error_Rate.
- -v: additional battery voltages.
- Workqueue power efficient status.
- Show Intel graphics parameters for Ubuntu's i915_bpo module.
* Bugfixes:
- init start: Apply powersave regardless of previous state
(gh#linrunner/TLP#237).
- tlp-stat: Intercept non-existing or invalid charge values
(gh#linrunner/TLP#256).
-------------------------------------------------------------------
Thu Aug 18 14:46:12 UTC 2016 - sor.alexei@meowr.ru
- Update to version 0.9:
* General:
- Block concurrent invocation of TLP.
* Disc drives:
- AHCI runtime power management for host controllers and
attached disc drives.
- SATA_LINKPWR_BLACKLIST: Exclude SATA host devices from power
management.
* Radio Devices:
- Finally remove deprecated DEVICES_TO_ENABLE_ON_RADIOSW code
(works with Ubuntu 12.04/Linux 3.2 only).
- Change WIFI_PWR_ON_AC/BAT default config values to off/on for
better usability (1/5 is still supported for backwards
compatibility).
* Radio Device Wizard (tlp-rdw):
- Add another ThinkPad OneLink Pro Dock USB LAN (17ef:304).
* (ThinkPad) Battery:
- tlp-stat:
+ Distinguish incompatible hardware from load errors
(gh#linrunner/TLP#160).
+ Display battery charge and capacity values in %.
+ More selective suggestions for tp-smapi/acpi-call kernel
modules.
* tlp-stat:
- Intel graphics: include i915 parameters enable_dc, enable_psr,
modeset.
- --pev: monitor power supply udev events
(gh#linrunner/TLP#172).
- Processor:
+ Display available scaling governors.
+ intel_pstate: display turbo_pct, num_pstates.
- Storage Devices:
- Recognise blk-mq I/O scheduler.
- SMART attributes Power_Cycle_Count, Unused_Rsvd_Blk_Cnt_Tot,
NAND_Writes_1GiB.
- Suggestions: Add *60 models for tp-smapi/acpi-call.
- System Info: Display boot mode UEFI / BIOS.
- TLP Status:
+ Display time and mode of tlp's last invocation.
+ Issue warning when systemd-rfkill[@].service is not masked.
- Wireless: Display type in interface list.
* Bugfixes
- Handle kernel with built-in acpi_call module properly
(gh#linrunner/TLP#163).
- Battery discharge does not terminate on ThinkPad E-series
(gh#linrunner/TLP#170).
- TLP does not notice power source change (gh#linrunner/TLP#172).
- Do not touch wifi on shutdown when unconfigured
(gh#linrunner/TLP#175).
- Optimise rdw locking heuristics (gh#linrunner/TLP#176).
- tlp-stat: Fix ata error count (filter "DevExch" caused by
bay inserts).
- tp-smapi: Do not load on unsupported ThinkPads.
- Fix bash completion.
- Remove tlp-0.8-correct-udev-rules-path.patch: fixed upstream.
-------------------------------------------------------------------
Mon Jan 4 12:08:37 UTC 2016 - sor.alexei@meowr.ru
- Add tlp-0.8-correct-udev-rules-path.patch: set correct udev
rules path (boo#960498).
-------------------------------------------------------------------
Thu Aug 6 18:03:12 UTC 2015 - sor.alexei@meowr.ru
- Update to 0.8:
* General:
- TLP_DEFAULT_MODE: change default operation mode to AC when
no power supply can be detected (concerns some desktop and
embedded hardware only).
* Radio Devices:
- Resume: restore bluetooth state.
* Radio Device Wizard (tlp-rdw):
- Support ThinkPad OneLink Dock Basic/Pro for dock/undock
events.
- Detect systemd "predictable network interface names" for
WWAN.
* ThinkPad Battery:
- tpacpi-bat: new upstream version 2.2: get ASL path from
/sys/class/power_supply/*/device/path; avoids unnecessary
"AE_NOT_FOUND" kernel messages.
- tlp-stat:
- Show "No batteries detected."
- Explain battery status "Unknown" as "threshold effective".
- Show battery cell group voltages (verbose mode, tp-smapi
only).
- Show acpi-call suggestion for ThinkPad *40, *50, X1
models.
* USB:
- Remove USB_DRIVER_BLACKLIST.
* tlp-stat:
- Show warnings for ata errors by default.
* Bugfixes:
- tlp-stat: detect kernel config with PM_RUNTIME=N.
- tlp recalibrate: fix exitcode check.
- USB autosuspend: write power/control if actually changing
only.
- Ignore missing files in /proc/sys/fs/xfs.
- Fix udev event processing for AC/BAT sw.
-------------------------------------------------------------------
Sat Jan 31 23:32:42 UTC 2015 - sor.alexei@meowr.ru
- Update to 0.7:
* Processor:
- Limit max/min P-state to control power dissipation of the
CPU (intel_pstate only)
- Set performance versus energy savings policy
(x86_energy_perf_policy)
* USB:
- USB_DRIVER_BLACKLIST: exclude devices assigned to the listed
drivers from USB autosuspend; default: usbhid
- USB_BLACKLIST_WWAN: match internal driver list instead of USB
vendor ids
- USB_WHITELIST: include devices into USB autosuspend even if
already excluded by the driver or WWAN blacklists
* Radio devices:
- DEVICES_TO_ENABLE_ON_AC/DISABLE_ON_BAT /
DISABLE_ON_BAT_NOT_IN_USE: enable/disable radio devices upon
change of power source (excluding connected devices)
* ThinkPad Battery:
- Issue #105: provide proper return codes for all battery
functions
- Issue #106: setcharge allowed on battery power
- Do not activate new thresholds with force_discharge anymore
(tp-smapi)
- tpacpi-bat: support for ThinkPad E325 charge thresholds
* Misc:
- RUNTIME_PM_DRIVER_BLACKLIST: exclude PCI(e) devices assigned
to drivers;
default: radeon, nouveau (solves issue #94)
- Support Dell Latitude docks
- Support for NM 0.9.10
- Issue #109: tlp-stat: report "unknown" power source when no
AC detected
- Issue #98: do not change autosuspend_delay_ms, keep kernel
default settings
- Exclude pseudo usb disks
* tlp-stat:
- New options -d|--disk, -e|--pcie, -p|--processor,
-s|--system, -u|--usb
- Show driver and connection state for all enabled radio
devices
- Show driver name in Runtime PM PCI(e) device list
- Show type and state of docks and device bays
- Show type of init system
- Check if TLP's systemd services are enabled
* udev:
- Run change of power source in a detached subshell to avoid
blocking udev
- Fix dock/undock event processing for ThinkPad Adv Mini Dock
and Ultrabase
- Make USB device event processing more robust
+ Run in a detached subshell to avoid blocking udev
+ Wait 2s for subdevices to populate for proper
black/whitelist detection
-------------------------------------------------------------------
Thu Nov 20 07:32:39 UTC 2014 - sor.alexei@meowr.ru
- Adjust dependencies according to
http://linrunner.de/en/tlp/docs/tlp-developer-documentation.html
-------------------------------------------------------------------
Wed Oct 8 16:27:21 UTC 2014 - sor.alexei@meowr.ru
- Initial build.
