File diskimage-builder.changes of Package diskimage-builder
-------------------------------------------------------------------
Thu May 8 12:06:24 UTC 2025 - Daniel Garcia <daniel.garcia@suse.com>
- Update to 3.37.0:
- Supports Gentoo profile 23.0 and removes support for the
nonworking 17.1 and 17.0 profiles.
- Gentoo element updated to avoid using testing (~arch) packages.
- Gentoo element now uses upstream binary package host by default.
- Fixes an issue where an image using the manifest element could
fail to build when using a non-root user. See bug 2069956.
- Fixed an issue where the growroot element on openrc init systems
would not function.
- Fixed an issue where the devuser element was unable to grant sudo
capabilities on gentoo images.
- Fixed an issue in Gentoo implmentation for install-packages
element where build time would grow linearly with each additional
package removal. Now, all removed packages are deselected and
removed in a single transaction.
- 3.36.0:
- The vm element is no longer included dependency of the
rocky-container, almalinux-container and fedora-container
elements. You will need to update your build configuration to
include this element if you still wish to create partitioned disk
based images.
- 3.34.0:
- Adds the ability for diskimage-builder to create images with
different block sizes. By default, this remains at the default of
512 bytes, but some newer devices require 4096 bytes to be used,
which impacts the overall layout rendering 512 byte images
incompatible. This setting can also be asserted and overridden
using the DIB_BLOCK_SIZE environment variable, but alternatively
exists as a new block_size parameter for local_loop section in
block device YAML documents.
- A new element autoupdates is added to DIB. This element, with
proper configuration, will enable and configure cloud images to
have a system that automatically updates the image, from the
upstream binaries. To this end, DIB_DEB_UPDATES_CONF or
DIB_YUM_UPDATES_CONF must be set during build time.
- Adds the ability to disable serial console logging from being
setup in the bootloader element by setting the
DIB_BOOTLOADER_USE_SERIAL_CONSOLE environment variable to False.
- Adds logic to permit the removal of consoles when the bootloader
element when no configuration has been expressed which requests
it, and serial console is disabled. This involves
DIB_BOOTLOADER_VIRTUAL_TERMINAL being set to an empty string and
DIB_BOOTLOADER_USE_SERIAL_CONSOLE is set to False.
- The new element replace-partition has been added which allows a
diskimage-builder built image to be used as the base image so that
it can be copied to a new partition layout. This allows the
content to be copied from one image to a new one without making
any package changes. The element replace-partition-redhat has a
documented example for redhat family images.
- It is no longer possible to build images using CentOS 7 or RHEL 7
as a base image as these reached EOL on 30th June 2024. The centos
and centos-minimal elements now default to a DIB_RELEASE value of
9-stream.
- DIB_GRUB_TIMEOUT defaulting to 1 second, GRUB_TIMEOUT was
duplicated in the /etc/defaults/grub the original intension of
DIB_GRUB_TIMEOUT default was to match the typical image default
which is one 1 second instead of 5 second today.
- The bootloader element now strips prior explicit console settings
from the /etc/default/grub file, in order to prevent accidential
re-introduction of prior settings when grub configuration is
manually updated later.
- The default release for the centos element is now “9-stream”
instead of “8”. This is a result of Centos8 having reached End of
Life.
- The autoupdates element has only been tested in Rocky and Ubuntu
images. In addition, the element does not check the validity of
the configuration files in any way.
- 3.33.0:
- Fixes an issue where if an operator set a cloud-init data source
to ConfigDrive, the host might not properly configure as automatic
metadata collection still attempts to operate. We now disable that
by default, when ConfigDrive is passed as an argument.
- 3.32.0:
- A new fail2ban element has been added which has has been tested on
Debian and Rocky images. The usage of a new variable
DIB_FAIL2BAN_CONF is now mandatory during built time.
- The bootloader element will explicitly set the timeout style to
hidden to hide the menu. Set DIB_GRUB_TIMEOUT_STYLE to menu to
display the menu and then wait for the timeout expire before
booting the default entry.
- Use of the simple-init element now removes cloud-init, in order to
prevent the two tools from clashing when booting a workload.
- Added a DIB_DEBIAN_CLOUD_INIT_HELPER variable that controls
whether debian element will attempt to pre-create required users
and sudoers file for the default cloud-init user. This should not
be needed for any modern Debian distro.
- Value of DIB_DEBIAN_ALT_INIT_PACKAGE has been switched to
systemd-sysv for Debian releases older then Jessie. If you still
need to build a version of Debian that is relying on sysvinit
please override the DIB_DEBIAN_ALT_INIT_PACKAGE variable for that.
- 3.31.0:
- The usage of the DIB_CHECKSUM variable is extended. Now to be more
specific the variable can be set to the sha256 or md5 value to
generate only one checksum file. There also can be provided a
comma-separated list of the values, but only sha256 and md5
supported. For backward compatibility using DIB_CHECKSUM=1 or
option --checksum in the command line still can be used to
generate all supported checksums.
- The deploy-baremetal, deploy-kexec, deploy-tgtadm, and
deploy-targetcli elements are deprecated and will be removed in a
future release of diskimage-builder. The origins of the elemenets
largely dates back to the early efforts to support baremetal
deployment, and the methods have been long ago moved away from.
- As NetworkManager can’t automatically create default connection
profiles for InfiniBand interfaces, we are adding
nm-dhcp-ib-interfaces element to install
NetworkManager-system-connections-infiniband.nmconnection to
NetworkManager to create a wildcard InfiniBand connection profile.
- 3.30.0:
- Added environment variable REG_SAT_REPO to the rhel-common
element. Sets the repository label for Satellite client tools.
- The bootloader element now has variable
DIB_BOOTLOADER_VIRTUAL_TERMINAL to customize or suppress the
console=tty0 kernel argument.
- The Satellite Client reposotories replaces the Satellite Tools
repository since Satellite 6.11. The default repo labels in the
rhel-common element has been updated to reflect this change. See
Red Hat Satellite 6.11 Release Notes.
- To enable users that need to use the legacy Satellite Tools
repository, the REG_SAT_REPO environment variable has been added
to enable manual override of the Satellite repository.
- 3.28.0:
- Adds a fips element which attempts to enable FIPS mode
configuration into the disk image being created.
- A new command diskimage-builder is now provided (also aliased to
dib). It provides a YAML file based interface to disk-image-create
and ramdisk-image-create. All arguments can be specified as yaml
dictionary entries, along with environment variable overrides
which are applied over the provided environment.
- Adds swap as a valid “filesystem” for block devices
- Fixed the ubuntu-minimal target to also run autoremove at the end
of an image build.
- Fixes a possible case with a FIPS enabled disk image where the
cryptographic policies may be applied for enforcement of FIPS
mode, but the underlying kernel command line may be missing. This
in particular was discovered when testing on Rocky Linux. We now
test, and add the FIPS kernel command line flag if it is otherwise
enabled.
- Fixes the GRUB2 bootloader kernel command line where a prior boot
parameter could cause issues with bootloader configuration when an
image is rebuilt and the bootloader element is utilized. We now
remove any prior boot parameter in /etc/default/grub when
executing the bootloader element, and then assert a valid entry
boot parameter if a /boot partition is defined as part of the
image build.
-------------------------------------------------------------------
Sat Jan 28 19:45:48 UTC 2023 - Dirk Müller <dmueller@suse.com>
- update to 3.26.0:
* cache-url: Give up on curl install for Redhat platforms
* Clean up tox.ini for tox v4
* Grow thin pool metadata by 1GiB
* Add variable for check installing python3 in yum element
* tox jobs: pin to correct nodesets; use host networking for containerfile
* Fix issue in extract image
* Added example configuration
* Added cloud-init growpart element
* Add Rocky 9 ARM64 functional test
-------------------------------------------------------------------
Wed Dec 7 22:07:16 UTC 2022 - Dirk Müller <dmueller@suse.com>
- update to 3.25.0:
* Start running dib-lint again
* Install Fedora ifcfg NM compat package
* added elrepo element
* changed release check logic in lvm element
* Allow flake8 version 5
* Support LVM thin provisioning
* Add thin provisioning support to growvols
* rocky : create machine-id in 9
* Allow setting ROOT\_LABEL from environment
* Do dmsetup remove device in rollback
* Add Rockylinux 9 build configuration and update jobs for 8 and 9
* Add subscription-manager repo names for RHEL-9
* Disable the opensuse functest
* Upgrade openEuler to 22.03 LTS
* rockylinux : create machine-id early
* cache-url: turn off -x by default
* opensuse: better report checksum errors
* ubuntu: more exact match on squashfs file, containerfile: use focal
* Allow Gentoo to manage python versions by itself
* Parse block device lvm lvs size attributes
* update default python for gentoo to 3.10
* Removing old grub removal step
* Use internal dhcp client for centos 9-stream and beyond
* Fix BLS entries for /boot partitions
* Add Fedora 36 support
* containerfile: warn if we don't have a Dockerfile
* Add support for Python 3.10
* Revert "CentOS 9-stream : work around selinux permissions issue"
* Fix backward regex match
* Add a warning in satellite configuration
* Use plain tox jobs instead of openstack ones
* Stop using openstack upper constraints
* CentOS 9-stream : work around selinux permissions issue
* Revert "Remove py 3.6 support and update jobs"
* Drop tumbleweed job
* Remove py 3.6 support and update jobs
* Check and mount boot volume for data extraction with nouuid
* Fix openssl example command in dynamic-login
* Fix grub setup on Gentoo
* Adopted dkms element to work on Ubuntu Jammy and nvidia drivers
* Switch to the CentOS 9 IPA job
* Ensure cloud-init is configured to generated host keys
* Add Jammy functesting to dib
* Ensure passwd is installed on RH and derivatives
* Revert "Temporarily stop running OpenSUSE functtests"
* yum-minimal: workaround missing $releasedir variable
* Temporarily stop running OpenSUSE functtests
* Make centos reset-bls-entries behave the same as rhel
* Switch to release-notes-jobs-python3
* Revert "Fallback to persistent netifs names with systemd"
* Fix dhcp-all-interfaces on debuntu systems
* centos: avoid head pipe failure
* containerfile: update test to jammy
* Add a job to test building jammy
* Move reset-bls-entries to post-install
* Set machine-id to uninitialized to trigger first boot
* yum-minimal: clean up release package installs
* source-repositories : use explicit sudo/-C args when in REPO\_DEST
* Update gentoo python version to 3.9
* CentOS Stream 9 has EPEL now
* Add interpolation note for dynamic-login password
* Move grub-install to the end, and skip for partition images
* Use https for downloading ubuntu images
* containerfile: Add support for setting network driver
* Update fedora element testing to F35
* containerfile: add support for Docker
* Handle btrfs root subvolume for fedora extract-image
* Correctly create DIB\_ENV variable and dib\_environment file
* Revert "Revert "Detect boot and EFI partitions in extract-image""
-------------------------------------------------------------------
Fri Mar 4 07:19:58 UTC 2022 - pgajdos@suse.com
- version update to 3.19.1
lot of changes, see ChangeLog
-------------------------------------------------------------------
Sat Jan 15 18:48:02 UTC 2022 - Dirk Müller <dmueller@suse.com>
- add python-rpm-macros dependency
-------------------------------------------------------------------
Wed May 6 19:58:04 UTC 2020 - Dominique Leuenberger <dimstar@opensuse.org>
- Run test-suite using python3: export PYTHON=%{_bindir}/python3
before running testr.
- Replace all python2-* BuildRequires with their python3
equivalents.
-------------------------------------------------------------------
Thu Oct 10 13:32:59 UTC 2019 - Markos Chandras <mchandras@suse.de>
- Update to 2.28.0
* Add NetworkManager and dhcp-client for CentOS 8
* Fix networking for CentOS 8
* simple-init: Use wrappers to call pip for glean install
* simple-init: default to NetworkManager for CentOS and Fedora
* Add security mirror override for debian-minimal
* pip-and-virtualenv : deprecate source for CentOS 8, new variables
* yum-minimal: Don't install yum, install libcurl
* Use $YUM instead of direct calls in more places
* Add environment switch for centos8 to use dnf
* Update redhat-common pkg-map for centos 8
* Update locales for Centos 8
* dib-python : handle centos 8
* yum-minimal : update mirrors for Centos 8
* Remove "failovermethod=priority" for Fedora (dnf)
* Install Python 3 libselinux packages for Fedora
* Revert "Fixed use of flake8"
* Only install doc requirements if needed
* Use x86 architeture specific grub2 packages for RHEL
* Move doc related modules to doc/requirements.txt
-------------------------------------------------------------------
Mon Sep 9 11:33:05 UTC 2019 - Markos Chandras <mchandras@suse.de>
- Update to 2.27.0
* Uninstall linux-firmware and linux-firmware-whence
* Fixed use of flake8
* Allow configurable gzip binary name
* Do not delete cracklib from /usr/share
* Fedora 30 functional and boot tests
* rpm-distro: ensure we selinux relabel underlying directories
* Allow extra repositories to be added to images
* yum-minimal: install fedora-release-cloud
-------------------------------------------------------------------
Thu Aug 22 06:31:15 UTC 2019 - Markos Chandras <mchandras@suse.de>
- Update to 2.26.1
* zypper-minimal: Don't get confused by etc/resolv.conf symlink
* simple-init: add configurable RA timeout with network-manager
* update gentoo systemd profile to 17.1 from 17.0
* block-device-efi : expand disk size calculation
* Don't show all elements found
* dracut-regenerate: catch failures and exit code
* Fixes packages for arm64 bootloader
* Fixes DIB_DISTRIBUTION_MIRROR_UBUNTU_IGNORE matching when empty
* Fix the pypi element for multiple mirror URLs
* Stop regex warning
* Create /etc/machine-id for RHEL images
* fix comments / spelling errors in gentoo element
* support alternate portage directories
* journal-to-console: element to send systemd journal to console
* update version of open-iscsi that is installed on musl
* Cleanup: remove useless statement
-------------------------------------------------------------------
Mon Jul 15 11:21:56 UTC 2019 - Markos Chandras <mchandras@suse.de>
- Update to 2.25.0
* Only enable dbus-daemon on fedora-29
* Set router solicitation delay with using NM
* [RHEL-8] Set _clear_old_files=0 in install-pip element
* disable autounmask for emerge
* ironic-agent: Use targetcli & python3-devel on rhel8
* Mailing lists change openstack-dev to openstack-discuss
* install gnupg2 by default in debian-minimal
* set default sources conf for buster as it now has a release
* Enable nodepool testing for opensuse 15.1
* Replace nodepool func jobs
* Move existing Zuul project config to projects.yaml
* Move Zuul config in-repo
* Add DIB_UBUNTU_KERNEL to ubuntu-minimal
* Sync Sphinx requirement
* Update test coverage for openSUSE/-minimal to 15.1
* Remove the rhel 8 check for xfs
* debootstrap: make default network interface names configurable
* Move pypi to dib-python
* ironic-agent: install mdadm on the ramdisk
* Use architecture-specific grub2 RPMs on RHEL8
* Increase size of EFI system partition (again)
* bindep: exclude zypper from debian-stretch
* Makes image caching more resilient
* fail early when lates build information can not be fetched
* Deprecate rhel7 in favor of rhel
* Add version-less RHEL element for RHEL7 and RHEL8
* allow the use of non-bzip compressed stages for building gentoo
* Replace git.openstack.org URLs with opendev.org URLs
* Use megabyte granularity for image extra space
* bindep: add sudo
* Update test coverage for openSUSE/-minimal to 15.0
* Use fedora-release-common for fedora 30+
* openssh-server: harden sshd config
* Support defining the free space in the image
* Allow specification of filesystem journal size
* Document the various global filesystem options
* Add option to skip update packages
-------------------------------------------------------------------
Wed May 15 23:41:19 UTC 2019 - Jonathan Harker <jharker@suse.com>
- Upgrade to 2.22.0
* Only enable dbus-daemon for fedora-29 and below
* Switch simple-init to support python3
* openssh-server: harden sshd config
* Support defining the free space in the image
* Allow specification of filesystem journal size
* Document the various global filesystem options
* Constraint networkx to <2.3 for Python 2
* Fix Fedora aarch64 image location
* debian-minimal buster support
* Also use selinuxenabled to check selinux status
-------------------------------------------------------------------
Fri Apr 12 13:36:52 UTC 2019 - Markos Chandras <mchandras@suse.de>
- Version bump to 2.21.0
* Minor clarifications in centos7 element docs
* Unmount internal mounts on finalise errors
* Add DIB_APT_MINIMAL_CREATE_INTERFACES toggle
* [lvm] Add Ubuntu bionic as supported distro
-------------------------------------------------------------------
Tue Mar 19 01:32:35 UTC 2019 - John Vandenberg <jayvdb@gmail.com>
- Relax egg-info requirement flake8 >=2.5.4,<2.6.0 which is
incompatible with available flake8 3.x
-------------------------------------------------------------------
Fri Mar 1 15:40:31 UTC 2019 - Markos Chandras <mchandras@suse.de>
- Version bump to 2.20.3
* Update gentoo-releng gpg key
* Fix opensuse 42.3 pip-and-virtualenv
* Keep git after ironic-agent post
* set rhel minor release
* update spelling errors
-------------------------------------------------------------------
Fri Feb 15 12:57:22 UTC 2019 - Markos Chandras <mchandras@suse.de>
- Version bump to 2.20.1
* pip-and-virtualenv: handle centos image-based builds
* pip-and-virtualenv : only remove system files on centos
* Enable dbus-broker for Fedora 29
* fix systemd import-tar for gentoo
* Add python3-setuptools to bindep.txt for Fedora
* support cracklib in pam for Gentoo's musl profile
* Make sure $TMP_BUILD_DIR/mnt is owned by root
* change to python36 for gentoo
* source-repositories: Replace documentation http with https links
* Delete the duplicate words in 50-zipl
* Change phase to check for dracut-regenerate in iscsi-boot
* Add policycoreutils-python-utils to bindep
* Use template for lower-constraints
* simple-init: allow for NetworkManager support
* package-installs: provide for skip from env var
* Add an element to configure iBFT network interfaces
* move selinux-permissive configure to pre-install phase
* Update to Fedora 29
* Increase size of EFI system partition
-------------------------------------------------------------------
Mon Nov 5 16:31:48 UTC 2018 - Markos Chandras <mchandras@suse.de>
- Version bump to 2.18.0
* Add ubuntu-systemd-container operating-system element
* Turn on quiet mode when logfile specified
* Fix epel repo rewrite, add to testing
* Add a post-root.d phase
* Fix DIB_DISTRIBUTION_MIRROR_UBUNTU_IGNORE regex typo
* Add support for Fedora 28, remove EOL Fedora 26
* ubuntu: Add options to ignore mirror components and use insecure repos
* simplify overlay logic for Gentoo
* simplify python3.6 selection on gentoo
* Turn down pkg-map and hook copy tracing output
* enable caching for gentoo builds
* Add a pre-finalise.d phase
* Minor documentation updates
* Allow debootstrap to cleanup without a kernel
* Fail build due to missing kauditd only when SELinux is enabled
* Fix DIB ubuntu-minimal running on bionic (18.04)
* ubuntu-common: Update default DIB_RELEASE to bionic
* Move common ubuntu environment setting to ubuntu-common element
* allow building non-gentoo images on gentoo hosts
-------------------------------------------------------------------
Fri Sep 14 09:16:45 UTC 2018 - Markos Chandras <mchandras@suse.de>
- Version bump to 2.17.0
* Only append DIB_BOOTLOADER_DEFAULT_CMDLINE to default grub entry
* Fix CentOS image build failure when dib runs on system where audit disabled
* Fix bootloader packages for aarch64
* Install ca-certificate with redhat-common
* Add netcat to redhat-common map-packages
* Only detach device if all partitions have been cleaned
* Move LVM cleanup phase into cleanup
* Add DIB element to blacklist nouveau
* modprobe DIB_MODPROBE_BLACKLIST should be optional
* cache-url requires curl
* Fix for proper LVM support
* Call kpartx remove in umount, not cleanup
* block-device lvm: fix umount phase
* Don't quote names with sgdisk
* better handle existing keywords files/directories
* IPA requires iptables
* Install sudo on Gentoo images by deault
-------------------------------------------------------------------
Wed Jul 18 14:52:24 UTC 2018 - mchandras@suse.de
- Version bump to 2.16.0
* Update pylint to 1.7.6, uncap networkx
* Add expected semicolons for dhclient.conf
* Add keyring if supplied
* Add new modprobe element
* Add iscsi-boot element for CentOS images
* Fix /etc/network/interfaces file contents
* Convert labels to upper case
* Fix bootloader for efi on rhel systems
* Don't run setfiles on /boot/efi
* Add iscsi-boot element
* Fix bootloader packages for rhel
* Don't install zypper on bionic
* Rename output log files
* Save and close stdout on exit
* Reduce path length in PS4 for debug
* Use surrogateescape with outfilter.py
* Fix encoding issue during processing output
- Package improvements
* convert to python3
* Improve description
* spec-cleaner fixes
-------------------------------------------------------------------
Thu Jun 7 13:13:28 UTC 2018 - mchandras@suse.de
- Version bump to 2.15.1 (bsc#1097115)
* elements: pip-and-virtualenv: Handle openSUSE Leap 15
* Allow to rebuild arbitrary images
* Replace the ubuntu-minimal trusty test with a bionic one
* Remove non-maintained ubuntu-core element
* elements: zypper-minimal: Add support for openSUSE Leap 15.X
* Add Ubuntu 18.04 support
* Remove duplicate GRUB command line entry
* rpm-distro: set the contentdir yum var
* Trivial: update url to new url
* Fixes add-apt-keys in dpkg element
* Add pip cache cleanup to pip-and-virtualenv
* pip-and-virtualenv: fix install-pip when centos-release-openstack is enabled
* Stop using slave_scripts/install-distro-packages.sh
-------------------------------------------------------------------
Mon Apr 30 11:48:07 UTC 2018 - mchandras@suse.de
- Version bump to 2.14.1
* Fix epel element for centos-minimal
* Revert "debootstrap: Call update-initramfs explicitly"
* Remove installed packages before pip install
* Don't only install python3-virtualenv
* Don't use -e to test for what might be broken symlink
* add lower-constraints job
* Set the dhclient timeout to match DIB_DHCP_TIMEOUT
* Formalise saving of /etc/resolv.conf
* Restore tracing on exit points of block_device_create_config_file
* delete unused module
* debootstrap: Call update-initramfs explicitly
* Change the GENTOO_PORTAGE_CLEANUP variable default
* Fix element-provides in debian element
* Revert "Remove tripleo jobs"
* enable systemd profile for Gentoo
* install sudo in the devuser element
* Fix default partition type
* Remove tripleo jobs
* remove portage git directory
* Updated from global requirements
* Updated from global requirements
* proliant-tools: add net-tools package to support hpsum utility
* Make the build reproducible
* Updated from global requirements
* secondary architectures use different url
* Fix for rhel7 iso image creation.
* Fix for passing user defined value for satellite cert for rhel-common.
* arm64: use HWE kernel and fix console
* Choose appropriate bootloader for block-device
* Add block-device defaults
* Fail if two elements provide the same thing
* GPT partitioning support
* update Gentoo Hardened profiles (now stable)
* Checking link status according to DIB_DHCP_TIMEOUT
* Remove some redundant indents
* Update Fedora defaults to 27
* zypper-minimal: Set default locale env to C.UTF-8
* Clean up dib-python symlink
-------------------------------------------------------------------
Fri Mar 9 10:52:39 UTC 2018 - mchandras@suse.de
- Version bump to 2.11.0
* Install systemd earlier for Ubuntu Bionic
* update gentoo vars for new profile and python
* Set default label for XFS disks
* Don't install dmidecode on Fedora ppc64le
* Updated from global requirements
* Add support for Fedora 27, remove EOL Fedora 25
* Don't fstrim vfat partitions
* Remove RH1 check OVB jobs from configuration
* upgrade pip before using -c option
* Correct link address
* Updated from global requirements
* Add SUSE Mapping
* Revert "Dont install python-pip for py3k"
* Adding mapping for SUSE package
* Check source-repository-* files for trailing newline
* ironic-agent: don't remove make
* Remove architecture rules on lshw dependency in ironic-agent
* zypper: fix package removal
* Avoid tox_install.sh for constraints support
* Fix wrong epel-release-7* package URL
* Add the groundwork for musl profile support
* Enable support for Gentoo overlays
* Pre-install curl
* Install fedora-gpg-keys for F27
* Make preinstall.d more deterministic
* Use EPEL for debootstrap on centos
* Fix /dev/pts mount options handling
* Make python changes more reliable
* Remove setting of version/release from releasenotes
* elements: zypper-minimal: Refresh repositories where necessary
* Updated from global requirements
* elements: Respect devpts mount options
* Dont install python-pip for py3k
* Enable gentoo in pip-and-virtualenv element
* Add zipl element as s390x architecture bootloader
* diskimage_builder: lib: common-functions: Fix options for devpts mount
* Move to a common lock-file directory
* Create rescue user on ironic agent
* Use -t devpts for /dev/pts mounts
* Dont install python-virtualenv for py3k in deb
* Import legacy playbooks
* Add debian minimal requirement for arm64
* Fix grub2 dependency on arm64
* Remove dd from LVM element
* Update Gentoo element for element changes
* Update proliant-tools to support Gen10 Proliant servers
* Move fstrim to block device layer
* Actually sort mount-point list
* Change to install a package in 'proliant-tools'
* Clear /etc/machine-id to avoid duplicate machine-ids
* Add timestamp output filter
-------------------------------------------------------------------
Mon Dec 4 13:41:57 UTC 2017 - mchandras@suse.de
- Version bump to 2.9.0
* Add initramfs-tools for ubuntu-minimal
* Create /etc/machine-id for fedora
* Use latest Fedora .qcow URL
* Updated from global requirements
* Add missing package dependency for yaml
* Mention the need of dracut-regenerate element
* Move the ordering of the dracut regenerate command
* Fix cylical systemd config for dhcp-all-interfaces
* LVM support for dib-block-device
* Increase timeout for removal
* Add netbase to ensure /etc/protocols is placed for debian
* Add kpartx as a requirement to build images
* Clear up debian element documentation
* Bump fedora/fedora-minimal DIB_RELEASE 26
* Allow users to specify partition type in the MBR PTE
- Fix env-script-interpreter rpmlint warnings.
-------------------------------------------------------------------
Mon Aug 14 06:22:03 UTC 2017 - mchandras@suse.de
- Version bump to 2.8.0
* Move selinux packages to redhat-common
* Use SELinuxfs to check selinux status
* Switch openSUSE to 42.3 by default
-------------------------------------------------------------------
Wed Jul 26 09:22:29 UTC 2017 - mchandras@suse.de
- Version bump to 2.7.1
* elements: zypper-minimal: Install tar package
* zypper: Clean caches and don't cache packages locally
-------------------------------------------------------------------
Mon Jul 24 09:24:46 UTC 2017 - mchandras@suse.de
- Version bump to 2.7.0
* Move setfiles to outside chroot with runcon
* doc: supported_distros: Add openSUSE Leap 42.2/3 and Tumbleweed
* Add -m flag to setfiles for Fedora 26
* yum-minimal: pre-install coreutils
* Force install during pip-and-virtualenv
* Fix latest-limit command line
* opensuse-minimal: install glibc-locale
* elements: openstack-ci-mirrors: Use openSUSE mirrors for gating jobs
* Remove DIB_[DISTRO]_DISTRIBUTION_MIRROR
* doc: Switch from oslosphinx to openstackdocstheme
* The correct option for label name in fat and vfat is '-n'
* zypper-minimal: No point in preserving the environment here
* Remove additional Bumblebee repository for opensuse element
* Enable console during kernel boot on Power
* fix readme.rst to reflect correct environment variable
* Add symlink test for resolv.conf restore
* pip-and-virtualenv: Install python3 on openSUSE
* Support for Cloud Images on ppc64le for rhel7 and centos7
* bindep.txt: Exclude gnupg2 package on openSUSE
* Avoid hanging endlessly on unreachable cache urls
* elements: pip-and-virtualenv: Use common packages for openSUSE
* Remove mirror create
* Remove centos and rhel elements
* Updated from global requirements
* dib-lint: Ignore editor temp files for linting run
* Fix mkfs use wrong label option for vfat
* Use the dib python to do cleanup
* Replace architecture-emulation-binaries with qemu-debootstrap
-------------------------------------------------------------------
Fri Jul 14 11:11:17 UTC 2017 - mchandras@suse.de
- Version bump to 2.6.1
* On suse the python2 dev package is python-devel
* Move ironic-agent test to fedora-minimal
* Start at using CI mirrors for fedora/centos
* Use local mirror for ubuntu-minimal jobs
* Move apt-sources to ubuntu-minimal / move debian to skip list
* Sync after writing partition table
* Install systemd earlier for Stretch
* Fix mkfs failure when loop device is not ready
-------------------------------------------------------------------
Tue Jun 13 06:43:16 UTC 2017 - mchandras@suse.de
- Version bump to 2.6.0
* PPC bootloader; install to boot partition
* Pass all blockdevices to bootloader
* Move global mount tracking into state
* Use global state to check for duplicate fs labels
* Remove 'state' argument from later cmd_* calls
* Use picked nodes for later cmd_* calls
* Don't make image & loopdev functions static
* Add env var to dump config graph
* Move ppc block-device default to right $ARCH
* Update tracing in block_device_create_config_file
* Pad state dump
* Adjust package mapping for SUSE family
* Drop support for Ubuntu precise
* Adjust package installation for openSUSE
* Refactor mount-point sorting
* Remove dracut-network element
* Remove ccache
* Test openSUSE 42.2/42.3 image builds
* Add state object, rename "results", add unit tests
* allow uninstalls to fail on gentoo
* Refactor: use lazy logging
* drop deprecated map-services/packages from zypper element
* dhcp-all-interfaces.sh - Add support for InfiniBand interface DHCP
-------------------------------------------------------------------
Sun Jun 11 16:59:45 UTC 2017 - mchandras@suse.de
- Version bump 2.5.0
* Disable recommended package installations for zypper-minimal
* Use networkx for digraph
* Various internal fixes
* Adding unit testing for configuration
* Produce API documentation
-------------------------------------------------------------------
Thu May 25 07:59:42 UTC 2017 - mchandras@suse.de
- Version bump to 2.4.1
* Set manifest permissions in the image
* Move parts of Partition creation into object
* Split partition into it's own file
* Move exception to it's own file (again)
* Add weights to digraph
* Switch debian to deb.debian.org
* Add dracut-regenerate elements
* Set manifests to mode 600 and owner root
* Only unmount directories that are mounted
* Apply setfiles on all mountpoints
-------------------------------------------------------------------
Wed May 17 15:25:37 UTC 2017 - mchandras@suse.de
- Version bump to 2.4.0
* Refactor: block-device filesystem creation, mount and fstab
* Take --params from environment
* Refactor documentation on image creation
* Add a test to validate we can build debian vms
* Introduce exec_sudo command
* Fix py3 error in block-device
* Refactor block-device base functions.
* Add bzip2 to test install
* Add refactor of tree-like vs graph
* Set LC_ALL in disk-image-create
* Improve documentation for image creation
* Refactor block_device: isolate the getval call
* Refactor block_device: passing command line parameters
* Make Gentoo package updates work more often
* Turn off strict_id mode for Ec2 datasource
* Clean out apt index caches at end of image build
-------------------------------------------------------------------
Wed Apr 21 10:07:28 UTC 2017 - mchandras@suse.de
- Update to version 2.3.3
* Add yum-utils as EPEL dependency
* Skip python3-virtualenv on <= trusty
* pip-and-virtualenv : install python2 & 3, and default to 2
* Install pip with python interpreter
* Move do_extra_package_install to run in install phase
* Updated from global requirements
* Unify and fix doc of several Debian and Ubuntu elements
* Fix package-installs-v2 output
* Basic logging for package-installs-squash
* Use DIB_PYTHON_EXEC to run commands
* Fix typo in pip-and-virtualenv
* Ignore missing path in unmount_dir
* Run dib-run-parts out of /tmp
* Don't provide dib-run-parts
* Add flag to disable EPEL
* Fix code-block in README of rhel7 element
* Fix opensuse-minimal element on non-SUSE hosts
* Use stevedore for plugin config of block device
* Adding aarch64 support for CentOS7
* Have simple-init enable network.service
* Use correct Ubuntu distro url on non-x86 arches
* Typo fix: curent => current
* functests: skip qcow2 generically but add specific test
* Add default PPC block-device layout
* Capture output in _exec_sudo
* Fix typo in CMDLINE env var for bootloader
* Allow ELEMENTS_DIR to be configurable
* Use sphinx warning-is-error
* Updated from global requirements
* squash-package-install to use the correct python
* Make our virtualenv source py3 safe
* blockdevice.py: python3 fixes
* Fix dib-init-system for Debian Jessie and Debian Stretch
* Send custom parameters in bootloader to GRUB_CMDLINE
-------------------------------------------------------------------
Mon Mar 13 12:19:38 UTC 2017 - mchandras@suse.de
- Update to version 2.0.0
* Add 2.0.0 release notes
* Run indent checks in diskimage_builder/lib
* Use OrderedDict for partitions instead of simple dictionary
* Refactor: block-device partitioning cleanup
* fix grub2 element for ubuntu xenial [lp##1627402]
* Semi-automatic doc generation of element dependency
* Fix up element doc generation
* Check return of _load_state
* block-device: change top level config from dict to list
* Handle blank lines in element-deps
* Don't run unit tests from run_functests.sh
* Refactor: block-device handling (partitioning)
* Add get_elements; preserve backwards compat for expand_dependencies
* Fix --version display
* Activate virtualenv in disk-image-create
* Remove execute perm from disk-image-create
* Move dib-run-parts into diskimage-builder
* Move diskimage-image-create to an entry point
* Move elements & lib relative to diskimage_builder package
* Fail on element-info error
* Remove deploy element
* Remove deprecated deploy-ironic element
* Remove deprecated ironic-discoverd-ramdisk
* Remove deprecated expand-dependencies arg
* Remove deprecated serial-console element
* Remove deprecated map-services
* Add release notes for block device handling.
* Move element-info to a standard entry-point
* Refactor: block-device handling (local loop)
* Convert pkg-map and svc-map copies to explicit variables
* Add IMAGE_ELEMENT_YAML and get_image_element_array
* Making element overriding explicit
* For developer and low-level oriented changes please read the following thread
- http://lists.openstack.org/pipermail/openstack-dev/2017-February/111833.html
-------------------------------------------------------------------
Fri Mar 3 01:02:44 UTC 2017 - mchandras@suse.de
- Update to version 1.28.0
* [suse] Handle pip-and-virtualenv install for opensuse
* pip-and-virtualenv: also handle rhel distros
* [suse] remove --no-confirm from zypper invocation
* gentoo: do not manually clean /tmp
* Fix requirements update
* Fix up doc errors
* python-brickclient: accommodate python2/3 changes
* Move Ubuntu specific use_tempaddr setting to ubuntu-common element
* Fix typo in README.rst
* yum/install-packages output cleanup
* Preinstall pyOpenSSL
* Target map-packages deprecation message
* Turn down some low-value tracing output
* Move generation of dib_[environment|args] to manifest element
* Use strings in package-installs follow output
-------------------------------------------------------------------
Thu Feb 16 17:46:42 UTC 2017 - mchandras@suse.de
- Update to version 1.27.0
* Add DIB_IPA_COMPRESS_CMD option
* ironic-agent: use /sbin for modprobe
* move post-install.d to finalize.d
* Bump fedora release to 25
* Fix dhcp-all-interfaces for ubuntu-minimal xenial
* Don't set base element path in run_functests.sh
* Use %i instead of %I in dhcp-interface@.service
* Remove hardcoded components
* Set grub device in /etc/default/grub
* Replace yaml.load() with yaml.safe_load()
* Unify tidy up logs in lib/img-functions
* Also check bin/ for tabs
* Handle failure of carrier check in dhcp-all-interfaces.sh
* Make DHCP timeout configurable
* Run dhcp-interface@.service after network.target
* update pkg-map entries for python3
* dib-lint: python3 compatibility fixes
* debootstrap: avoid duplicate network configuration
* Remove yum chroot caching
* Speed up chroot checking loop
* Allow disto-specific mirror settings
* Update hpssacli to ssacli in proliant-tools element
-------------------------------------------------------------------
Thu Dec 22 17:33:25 UTC 2016 - mchandras@suse.de
- Update to version 1.26.1
* Generate ssh-hostkeys on boot for ironic agent
* add option to configure cloud-init to allow password authentication
* elements: Drop unneeded DIB_INIT_SYSTEM usage
* Replace six.iteritems() with .items()
* Catch errors in DIB_INIT_SYSTEM export
* DIB element to support cinder local attach/detach functionality
* elements: Drop executable bits from environment files
* Update sysctl-write-value to do conflict checking
* Put MKFS_OPTS after filesystem type
* Make dib-python use the default python for distro
* Don't set the executable bit on dhcp-interface@.service
* Move pip-and-virtualenv source install to 10-
* Add install-types as pip-and-virtualenv dep
* Allow package-installs to parse DIB_PYTHON_VERSION
* Fix pip-and-virtualenv to work with python3
* elements: dib-python: Add python2 as the default version for openSUSE
* Support sysv init system used by Debian Wheezy
* Pip install as 10- incompatible with 05-heat-cfntools
* Recreate initramfs within loopback image
* Fix bootloader element on ppc
* Add ubuntu-precise support to dib-python
* FIx the DIB_CLOUD_INIT_ALLOW_SSH_PWAUTH variable name in README file
* Switch to openSUSE Leap 42.2 release by default
* Install dracut-generic-config package
* Add output image format tgz support
* Add squashfs output image format
* set default DIB_PYTHON_VERSION=2 for rhel7
* Set grub timeout default
* Dont run with VIRTUAL_ENV set
-------------------------------------------------------------------
Mon Dec 5 15:24:49 UTC 2016 - mchandras@suse.de
- Update to version 1.24.0
* elements: pip-and-virtualenv: Add python-xml dependency
* Trace package install in package-installs-v2
* elements: zypper-minimal: Add ca-certificates-mozilla package
* Improve checksum performance for images
* Perform package install outside of debootstrap
* Remove obsolete patches for the time being
- 0001-lib-Drop-shebang-from-library-scripts.patch
- 0002-elements-Drop-executable-bits-from-environment-files.patch
-------------------------------------------------------------------
Tue Oct 18 11:05:19 UTC 2016 - mchandras@suse.de
- Use addFilter instead of setBadness in the rpmlintrc file.
-------------------------------------------------------------------
Mon Oct 17 12:19:14 UTC 2016 - mchandras@suse.de
- Initial commit. Taken from the Cloud OBS project
* diskimage-builder-rpmlintrc: Add rpmlint file to prevent build
failures due to the 'wrong-script-interpreter' check. It's a
spurious warning since the interpreter is only used within the
generated image and it does not affect the host or the package
itself.
* 0001-lib-Drop-shebang-from-library-scripts.patch: Add patch to
drop the shebang from the lib/* files which are meant to be
sourced instead of executed (fixes: 'non-executable-script')
* 0002-elements-Drop-executable-bits-from-environment-files.patch:
Add patch to drop the executable bit from files which are meant to
be sourced instead of executed. (fixes: 'script-without-shebang')
