File dkms-nvidia.changes of Package dkms-nvidia

------------------------------------------------------------------
Sun 24 Jul 00:27:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 515.48.07

* Published the source code to a variant of the NVIDIA Linux
kernel modules dual-licensed as MIT/GPLv2. The source is
available here:
https://github.com/NVIDIA/open-gpu-kernel-modules
and will be updated each driver release. Please see the
"Open Linux Kernel Modules" chapter in the README for details.
* Added support for the VK_EXT_external_memory_dma_buf and
VK_EXT_image_drm_format_modifier Vulkan extensions. To use
this functionality, the nvidia-drm kernel module must be
loaded with DRM KMS mode setting enabled. See the DRM KMS
section of the README for guidance on enabling mode setting.
* Changed nvidia-suspend.service, nvidia-resume.service, and
nvidia-hibernate.service to use WantedBy= rather than
RequiredBy= dependencies for systemd-suspend.service and
systemd-hibernate.service. This avoids a problem where
suspend or hibernate fails if the NVIDIA driver is uninstalled
without disabling these services first.
See https://github.com/systemd/systemd/issues/21991
If these services were manually enabled, it may be necessary
to update their dependencies by running
sudo systemctl reenable nvidia-suspend.service
nvidia-resume.service nvidia-hibernate.service
* Interlaced modes are now disabled when active stereo is enabled.
* NVIDIA X Server Settings will now display the quit confirmation
dialog automatically if only there are pending changes that need
to be manually saved. The corresponding configuration option to
control the appearance of the quit dialog was thus also removed.
* Removed the warning message about mismatches between the
compiler used to build the Linux kernel and the compiler used
to build the NVIDIA kernel modules from nvidia-installer.
Modern compilers are less likely to cause problems when this
type of mismatch occurs, and it has become common in many
distributions to build the Linux kernel with a different
compiler than the default system compiler.
* Updated nvidia-installer to skip test-loading the kernel
modules on systems where no supported NVIDIA GPUs are detected.
* Updated nvidia-installer to avoid a race condition which could
cause the kernel module test load to fail due to udev
automatically loading kernel modules left over from an existing
NVIDIA driver installation. This failure resulted in an
installation error message "Kernel module load error:
File exists".
* Updated the RTD3 Video Memory Utilization Threshold
(NVreg_DynamicPowerManagementVideoMemoryThreshold) maximum value
from 200 MB to 1024 MB.
* Improved performance of GLX and Vulkan applications running
in gamescope.
* Added a "kernelopen" feature tag to the supported-gpus.json
file, to indicate which GPUs are compatible with
open-gpu-kernel-modules.
* Improved Vulkan swapchain creation failure reporting.
Applications can use the VK_EXT_debug_utils extension to
receive additional information when an error was encountered
in vkCreateSwapchainKHR().
* Added a new configuration option for NVIDIA NGX to allow
disabling the DSO signature check. See the "NGX" chapter of the
README for more information.
* Fixed an issue where HDMI audio output was not working in some
cases, especially with high display refresh rates (120Hz,
100Hz, etc.) using Fixed Rate Link (FRL) transmission mode.

------------------------------------------------------------------
Sun 24 Jul 00:27:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 515.43.04

* Published the source code to a variant of the NVIDIA Linux
kernel modules dual-licensed as MIT/GPLv2. The source is
available here:
https://github.com/NVIDIA/open-gpu-kernel-modules
and will be updated each driver release. Please see the
"Open Linux Kernel Modules" chapter in the README for details.
* Added support for the VK_EXT_external_memory_dma_buf and
VK_EXT_image_drm_format_modifier Vulkan extensions. To use
this functionality, the nvidia-drm kernel module must be
loaded with DRM KMS mode setting enabled. See the DRM KMS
section of the README for guidance on enabling mode setting.
* Changed nvidia-suspend.service, nvidia-resume.service, and
nvidia-hibernate.service to use WantedBy= rather than
RequiredBy=dependencies for systemd-suspend.service and
systemd-hibernate.service.This avoids a problem where
suspend or hibernate fails if the NVIDIA driver is
uninstalled without disabling these services first.
See https://github.com/systemd/systemd/issues/21991
If these services were manually enabled, it may be necessary
to update their dependencies by running sudo systemctl reenable
nvidia-suspend.service nvidia-resume.service
nvidia-hibernate.service
* Interlaced modes are now disabled when active stereo is
enabled.
* NVIDIA X Server Settings will now display the quit
confirmation dialog automatically if only there are pending
changes that need to be manually saved. The corresponding
configuration option to control the appearance of the quit
dialog was thus also removed.
* Removed the warning message about mismatches between the
compiler used to build the Linux kernel and the compiler used
to build the NVIDIA kernel modules from nvidia-installer. Modern
compilers are less likely to cause problems when this type of
mismatch occurs, and it has become common in many distributions
to build the Linux kernel with a different compiler than the
default system compiler.
* Updated nvidia-installer to skip test-loading the kernel
modules on systems where no supported NVIDIA GPUs are detected.
* Updated nvidia-installer to avoid a race condition which could
cause the kernel module test load to fail due to udev
automatically loading kernel modules left over from an
existing NVIDIA driver installation. This failure resulted in
an installation error message "Kernel module load
error: File exists".
* Updated the RTD3 Video Memory Utilization Threshold
(NVreg_DynamicPowerManagementVideoMemoryThreshold) maximum
value from 200 MB to 1024 MB.

-----------------------------------------------------------------
Sat 23 Jul 21:45:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 510.73.05

* Added a new configuration option for NVIDIA NGX to allow
disabling the DSO signature check. See the "NGX" chapter of
the README for more information.

------------------------------------------------------------------
Sat 23 Jul 21:37:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 510.68.02

* Fixed an issue where NvFBC was requesting Vulkan 1.0 while
using Vulkan 1.1 core features. This caused NvFBC to fail to
initialize with Vulkan loader versions 1.3.204 or newer.

------------------------------------------------------------------
Sat 23 Jul 21:20:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 510.60.02

* Added support for the following GPUs:
NVIDIA GeForce RTX 3090 Ti
NVIDIA RTX A4000H
NVIDIA RTX A5500
* Fixed a bug that could cause displays with HDMI or DisplayPort
audio to be deselected as the default audio output device after
resuming from suspend.
* Fixed a regression that could cause OpenGL applications to hang
or render incorrectly after suspend/resume cycles or VT-switches
* Fixed a bug, introduced in 495.29.05, that caused GPU "Model:"
in /proc/driver/nvidia/gpus/<Bus:Device.Function>/information to
be "Unknown" for some GPUs.
* Fixed a bug that caused the nvidia-settings control panel to
print spurious error messages
* Fixed a bug that could prevent nvidia-installer from detecting
the scripts/sign-file kernel module signing tool when using
separate kernel source and output directories.
* Fixed a bug which prevented kernel modules linked from
precompiled kernel interface object files from being loaded on
recent Linux kernels. This affected custom packages which were
prepared with nvidia-installer's --add-this-kernel option,
for example.

------------------------------------------------------------------
Sat 23 Jul 21:11:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 510.54

* Fixed a bug that could cause GPU exceptions when minimizing a
fullscreen Vulkan application on certain desktops, such as
Plasma.

------------------------------------------------------------------
Fri 11 Feb 22:21:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 510.47.03

* Added support for the following GPUs:
NVIDIA GeForce RTX 3050
* Fixed several issues which caused the supported-gpus.json file
to contain incorrect product information.
* Fixed a bug that caused the nvidia-settings control panel to
report inaccurate ECC error counts, and completely prevented
the reporting of aggregate ECC error counts. ECC error counts
reported by nvidia-smi were not affected.
* Added a GUI control for setting Image Sharpening values in the
app profiles page of the nvidia-settings control panel.
* Fixed a bug which caused Vulkan applications to hang when the
__GL_THREADED_OPTIMIZATIONS environment variable was set to
enable threaded optimizations in the NVIDIA driver.
* Fixed a bug where calls to vkWaitForPresentKHR would fail with
VK_TIMEOUT on Maxwell and Pascal GPUs.
* Added support for the VK_EXT_depth_clip_control extension.
* Added support for the VK_EXT_border_color_swizzle extension.
* Added support for the VK_EXT_image_view_min_lod extension.
* Fixed a bug in the Vulkan compiler where 64-bit atomics were
partially broken.
* Fixed a bug in the Vulkan driver where VK_NULL_HANDLE was not
properly handled as input to
VkRenderingFragmentShadingRateAttachmentInfoKHR.imageView.
* Added support for the VK_KHR_dynamic_rendering extension.
* Added support for the bufferDeviceAddressCaptureReplay Vulkan
feature.
* Optimized the Vulkan fullscreen presentation path for X11 and
direct-to-display swapchains.
* Added AV1 decode support to the NVIDIA VDPAU driver. See the
VDPAU Support appendix in the README for supported AV1 decoder
profiles.
* Added support for the VK_KHR_format_feature_flags2 extension.
* Added support for the VK_KHR_maintenance4 extension.
* Fixed a bug in the Vulkan driver where the SPIR-V Centroid
interpolation decoration was not ignored when used in
conjunction with FragCoord.
* Fixed a bug in the Vulkan driver where unreferenced descriptor
bindings were sometimes not ignored properly.
* Fixed a bug in the Vulkan driver where vkCmdBindDescriptorSets
would not properly handle pDynamicOffsets for compute pipelines.
* Added support for the VK_KHR_shader_integer_dot_product
extension.
* Added support for the VK_EXT_primitive_topology_list_restart
extension.
* Added support for the VK_EXT_load_store_op_none extension.
* Fixed a bug which caused OpenGL and Vulkan applications to
generate excessive traffic over dbus while attempting to
communicate with nvidia-powerd, even though nvidia-powerd was
not running.
* Removed the runtime loader (rtld) sanity test from
nvidia-installer.This test has been made largely obsolete
by GLVND.
* Updated nvidia-xconfig to add a BusID to the "Device" section
by default on systems with both NVIDIA and non-NVIDIA GPUs.
This behavior can be suppressed by using the --no-busid option.
* Enabled GSP Firmware by default on NVIDIA T4, A100, A30, A40,
A16, A2, and several other Tesla products. Please see the
"GSP Firmware" chapter in the README for details.
* Fixed a bug in the Vulkan driver where some Ray Tracing
shaders would timeout, resulting in device loss.
* Fixed a bug in the Vulkan driver where unused input
attributes to a vertex shader would corrupt the interpolation
qualifiers for the shader.
* Fixed a bug in the Vulkan driver where individual components
of barycentric inputs could not be read.
* Added support for the VK_KHR_present_id extension.
* Added support for the VK_KHR_present_wait extension.
* Added support for the VK_KHR_shader_subgroup_uniform_control_flow
extension.
* Fixed a bug where VK_NVX_binary_import was advertised as supported
on unsupported platforms. This caused calls to vkCreateDevice to
fail if applications attempted to enable VK_NVX_binary_import
on such platforms.
* Added support for the GBM API. This adds the new symlink
nvidia-drm_gbm.so pointing to the file
libnvidia-allocator.so.VERSION to implement a GBM backend driver
usable with the GBM loader from the Mesa project version 21.2 and
above, as well as the files libnvidia-egl-gbm.so.1.1.0 and
15_nvidia_gbm.json, which implement EGL support for the GBM
platform (EGL_KHR_platform_gbm).
* Add indicator for Resizable BAR support on compatible systems.
* Fixed a bug that could cause the X server to crash when starting
a new server generation on PRIME configurations.
* Removed support for NvIFROpenGL. This functionality was
deprecated in the 470.xx driver release.
* Removed libnvidia-cbl.so from the driver package. This
functionality is now provided by other driver libraries.
* Changed the minimum required Linux kernel version from 2.6.32
to 3.10.
* Updated nvidia.ko to load even if no supported NVIDIA GPUs
are present when an NVIDIA NVSwitch device is detected in the
system. Previously, nvidia.ko would fail to load into the
kernel if no supported GPUs were present.
* Added support for Vulkan 1.3.
* Added a new daemon, nvidia-powerd, to provide support for the
Dynamic Boost feature on supported systems. Dynamic Boost
balances power between the CPU and the GPU for improved
performance. For more details, see the "Dynamic Boost on Linux"
chapter in the README.
* Updated nvidia-bug-report.sh to search the systemd journal for
nvidia-powerd logs.
* Added a new module parameter, "peerdirect_support", to the
nvidia-peermem.ko kernel module, to correctly support GPUDirect
RDMA on MOFED 5.0 and older releases.
* Added an application profile to avoid an image corruption issue
in Blender, as described at https://developer.blender.org/T76874
* Fixed a driver installation failure on Linux kernel 5.17 release
candidates, where the NVIDIA kernel module failed to build with
error "implicit declaration of function 'PDE'".

------------------------------------------------------------------
Fri 11 Feb 22:12:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 510.39.01

* Fixed several issues which caused the supported-gpus.json file
to contain incorrect product information.
* Fixed a bug that caused the nvidia-settings control panel to
report inaccurate ECC error counts, and completely prevented
the reporting of aggregate ECC error counts. ECC error counts
reported by nvidia-smi were not affected.
* Added a GUI control for setting Image Sharpening values in
the app profiles page of the nvidia-settings control panel.
* Fixed a bug which caused Vulkan applications to hang when the
__GL_THREADED_OPTIMIZATIONS environment variable was set to
enable threaded optimizations in the NVIDIA driver.
* Fixed a bug where calls to vkWaitForPresentKHR would fail
with VK_TIMEOUT on Maxwell and Pascal GPUs.
* Added support for the VK_EXT_depth_clip_control extension.
* Added support for the VK_EXT_border_color_swizzle extension.
* Added support for the VK_EXT_image_view_min_lod extension.
* Fixed a bug in the Vulkan compiler where 64-bit atomics were
partially broken.
* Fixed a bug in the Vulkan driver where VK_NULL_HANDLE was not
properly handled as input to
VkRenderingFragmentShadingRateAttachmentInfoKHR.imageView.
* Added support for the VK_KHR_dynamic_rendering extension.
* Added support for the bufferDeviceAddressCaptureReplay Vulkan
feature.
* Optimized the Vulkan fullscreen presentation path for X11 and
direct-to-display swapchains.
* Added AV1 decode support to the NVIDIA VDPAU driver. See the
VDPAU Support appendix in the README for supported AV1 decoder
profiles.
* Added support for the VK_KHR_format_feature_flags2 extension.
* Added support for the VK_KHR_maintenance4 extension.
* Fixed a bug in the Vulkan driver where the SPIR-V Centroid
interpolation decoration was not ignored when used in
conjunction with FragCoord.
* Fixed a bug in the Vulkan driver where unreferenced descriptor
bindings were sometimes not ignored properly.
* Fixed a bug in the Vulkan driver where vkCmdBindDescriptorSets
would not properly handle pDynamicOffsets for compute pipelines.
* Added support for the VK_KHR_shader_integer_dot_product
extension.
* Added support for the VK_EXT_primitive_topology_list_restart
extension.
* Added support for the VK_EXT_load_store_op_none extension.
* Fixed a bug which caused OpenGL and Vulkan applications to
generate excessive traffic over dbus while attempting to
communicate with nvidia-powerd, even though nvidia-powerd
was not running.
* Removed the runtime loader (rtld) sanity test from
nvidia-installer. This test has been made largely obsolete
by GLVND.
* Updated nvidia-xconfig to add a BusID to the "Device"
section by default on systems with both NVIDIA and
non-NVIDIA GPUs. This behavior can be suppressed by
using the --no-busid option.
* Enabled GSP Firmware by default on NVIDIA T4, A100, A30,
A40, A16, A2, and several other Tesla products. Please
see the "GSP Firmware" chapter in the README for details.
* Fixed a bug in the Vulkan driver where some Ray Tracing
shaders would timeout, resulting in device loss.
* Fixed a bug in the Vulkan driver where unused input
attributes to a vertex shader would corrupt the
interpolation qualifiers for the shader.
* Fixed a bug in the Vulkan driver where individual
components of barycentric inputs could not be read.
* Added support for the VK_KHR_present_id extension.
* Added support for the VK_KHR_present_wait extension.
* Added support for the VK_KHR_shader_subgroup_uniform_control_flow
extension.
* Fixed a bug where VK_NVX_binary_import was advertised as
supported on unsupported platforms. This caused calls to
vkCreateDevice to fail if applications attempted to enable
VK_NVX_binary_import on such platforms.
* Added support for the GBM API. This adds the new
symlink nvidia-drm_gbm.so pointing to the file
libnvidia-allocator.so.VERSION to implement a GBM
backend driver usable with the GBM loader from the Mesa
project version 21.2 and above, as well as the files
libnvidia-egl-gbm.so.1.1.0 and 15_nvidia_gbm.json, which
implement EGL support for the GBM platform
(EGL_KHR_platform_gbm).
* Add indicator for Resizable BAR support on compatible
systems.
* Fixed a bug that could cause the X server to crash when
starting a new server generation on PRIME configurations.
* Removed support for NvIFROpenGL. This functionality was
deprecated in the 470.xx driver release.
* Removed libnvidia-cbl.so from the driver package. This
functionality is now provided by other driver libraries.
* Changed the minimum required Linux kernel version from
2.6.32 to 3.10.
* Updated nvidia.ko to load even if no supported NVIDIA
GPUs are present when an NVIDIA NVSwitch device is
detected in the system. Previously, nvidia.ko would fail
to load into the kernel if no supported GPUs were present.

------------------------------------------------------------
Fri 11 Feb 21:28:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 495.46

* Added support for the GBM API. This adds the new symlink
nvidia-drm_gbm.so pointing to the file
libnvidia-allocator.so.VERSION to implement a GBM backend driver
usable with the GBM loader from the Mesa project version 21.2
and above, as well as the files libnvidia-egl-gbm.so.1.1.0
and 15_nvidia_gbm.json, which implement EGL support for the
GBM platform (EGL_KHR_platform_gbm).
* Add indicator for Resizable BAR support on compatible systems.
* Fixed a bug that could cause the X server to crash when
starting a new server generation on PRIME configurations.
* Removed support for NvIFROpenGL. This functionality was
deprecated in the 470.xx driver release.
* Removed libnvidia-cbl.so from the driver package. This functionality
is now provided by other driver libraries.
* Changed the minimum required Linux kernel version from
2.6.32 to 3.10.
* Updated nvidia.ko to load even if no supported NVIDIA GPUs are
present when an NVIDIA NVSwitch device is detected in the system.
Previously, nvidia.ko would fail to load into the kernel if no
supported GPUs were present.
* Fixed a bug in the Vulkan driver where unused input attributes
to a vertex shader would corrupt the interpolation qualifiers
for the shader.
* Fixed a bug in the Vulkan driver where individual components
of barycentric inputs could not be read.
* Added support for the VK_KHR_present_id extension.
* Added support for the VK_KHR_present_wait extension.
* Added support for the VK_KHR_shader_subgroup_uniform_control_flow
extension.
* Fixed a bug where VK_NVX_binary_import was advertised as supported
on unsupported platforms. This caused calls to vkCreateDevice to
fail if applications attempted to enable VK_NVX_binary_import on
such platforms.
* Added a new command line option, "--no-peermem", to
nvidia-installer. Selecting this option prevents the installation
of the nvidia-peermem kernel module.
* Fixed a regression which prevented DisplayPort and HDMI 2.1
variable refresh rate (VRR) G-SYNC Compatible monitors from
functioning correctly in variable refresh rate mode, resulting
in issues such as flickering.
* Fixed a bug that can cause a kernel crash in SLI Mosaic
configurations.
* Added support for the EGL_NV_robustness_video_memory_purge
extension.

------------------------------------------------------------------
Fri 11 Feb 21:13:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 495.44

* Added support for the GBM API. This adds the new symlink
nvidia-drm_gbm.so pointing to the file
libnvidia-allocator.so.VERSION to implement a GBM backend driver
usable with the GBM loader from the Mesa project version 21.2
and above, as well as the files libnvidia-egl-gbm.so.1.1.0
and 15_nvidia_gbm.json, which implement EGL support for the
GBM platform (EGL_KHR_platform_gbm).
* Add indicator for Resizable BAR support on compatible systems.
* Fixed a bug that could cause the X server to crash when
starting a new server generation on PRIME configurations.
* Removed support for NvIFROpenGL. This functionality was
deprecated in the 470.xx driver release.
* Removed libnvidia-cbl.so from the driver package. This
functionality is now provided by other driver libraries.
* Changed the minimum required Linux kernel version from
2.6.32 to 3.10.
* Updated nvidia.ko to load even if no supported NVIDIA GPUs
are present when an NVIDIA NVSwitch device is detected in the
system. Previously, nvidia.ko would fail to load into the
kernel if no supported GPUs were present.
* Fixed a bug in the Vulkan driver where unused input attributes
to a vertex shader would corrupt the interpolation qualifiers
for the shader.
* Fixed a bug in the Vulkan driver where individual components
of barycentric inputs could not be read.
* Added support for the VK_KHR_present_id extension.
* Added support for the VK_KHR_present_wait extension.
* Added support for the VK_KHR_shader_subgroup_uniform_control_flow
extension.
* Fixed a bug where VK_NVX_binary_import was advertised as supported
on unsupported platforms. This caused calls to vkCreateDevice to
fail if applications attempted to enable VK_NVX_binary_import on
such platforms.
* Added a new command line option, "--no-peermem", to
nvidia-installer.Selecting this option prevents the installation
of the nvidia-peermem kernel module.
* Fixed a regression which prevented DisplayPort and HDMI 2.1
variable refresh rate (VRR) G-SYNC Compatible monitors from
functioning correctly in variable refresh rate mode, resulting
in issues such as flickering.
* Fixed a bug that can cause a kernel crash in SLI Mosaic
configurations.
* Added support for the EGL_NV_robustness_video_memory_purge
extension.

------------------------------------------------------------------
Tue 8 Feb 21:17:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 495.29.05

------------------------------------------------------------------
Sat 25 Sep 15:57:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 470.74

* Fixed a bug that could cause GPU applications to exit when
resuming from suspend.
* Fixed a regression which resulted in very-high system memory
usage for Direct3D 12 games when run through vkd3d-proton.
* Added an application profile to disable FXAA for Firefox to
prevent visual corruption.
* Fixed a Vulkan performance regression that affected rFactor2.
* Fixed a bug that could cause the /proc/driver/nvidia/suspend
power management interface to fail to preserve and restore
video memory allocations when the NVreg_TemporaryFilePath
module parameter for nvidia.ko specified an invalid path.
* Fixed a bug that caused nvidia-drm.ko to crash when loading
with DRM-KMS enabled (modeset=1) on Linux v5.14.

------------------------------------------------------------------
Sat 25 Sep 15:48:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 470.63.01

* Added support for the following GPUs:
NVIDIA RTX A2000

* Added support for the VK_KHR_wayland_surface extension.
* Fixed a Vulkan performance regression that affected rFactor2.

------------------------------------------------------------------
Sat 25 Sep 14:48:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 470.57.02

* Added support for the following GPUs:
GeForce RTX 3070 Ti
GeForce RTX 3080 Ti

* Updated the nvidia-settings command line interface to confirm
successful assignment of string attributes. This makes the
behavior more consistent with other types of attribute
assignments.
* Fixed a bug that could cause flickering in Blender and Steam
when running on Xwayland.
* Fixed a bug that caused GTK+3 applications using the GtkGLArea
class to crash when running on Xwayland.
* Added a workaround for DOOM Eternal, which avoids an
application bug where Vulkan swapchain recreation events are
not properly handled. On desktops like GNOME where the window
is initially redirected to the compositor, this may prevent
the game from flipping (and thus enabling G-SYNC).
* Added a workaround for Far Cry 5 when run through DXVK, which
avoids a shader race condition bug that was previously exposed
by new compiler optimizations.
* Increased the maximum limit on concurrent OpenGL contexts. This
limit was previously constrained by a fixed-size internal driver
resource, and is now constrained by available system memory.
* Applications that exceed the maximum limit on concurrent
OpenGL contexts will now receive a BadAlloc X error rather than
crashing.
* Fixed a bug that could cause the X server to crash upon shutdown
with some configurations using GPU screens.
* Fixed a bug that could cause rendering errors when displaying
scaled MetaModes using the "Nearest" resampling method.
* Fixed a bug that could cause OpenGL applications run in PID
namespaces to hang upon exit, generating warnings such as the
following in the X log: (WW) NVIDIA: Wait for channel idle timed
out.
* Added support for PRIME Display Offload where both the display
offload source and display offload sink are driven by the
NVIDIA X Driver.
* Added support for PRIME Display Offload where the display
offload source is AMDGPU.
* Fixed a bug that could prevent the driver from applying
application profiles when running applications through Proton
or Wine on a PRIME Render Offload configuration.
* Fixed a bug that could cause NvFBC's "direct capture" to crash
the X server when certain GLX calls are made during a capture.
* Removed usage of the sysctl(2) system call as a fallback for
procfs in nvidia-installer. This system call has been deprecated
since Linux 2.6.24, and has been removed completely with recent
versions of Linux and glibc.
* Added an NVIDIA NGX build for use with Proton and Wine. A new
library, nvngx.dll, has been added to enable driver-side support
for running Windows applications which make use of DLSS. Changes
to Proton, Wine, and other third-party software are needed for
this feature.
* Added support for VK_QUEUE_GLOBAL_PRIORITY_REALTIME_EXT from
the VK_EXT_global_priority extension. This enables support for
asynchronous reprojection in SteamVR.
VK_QUEUE_GLOBAL_PRIORITY_REALTIME_EXT is supported on
Pascal GPUs and newer.
Global priorities other than VK_QUEUE_GLOBAL_PRIORITY_MEDIUM_EXT
require root privileges or the CAP_SYS_NICE capability.
* Added support for the VK_EXT_global_priority_query extension.
* Added the nvidia-peermem.ko kernel module. This module provides
Mellanox InfiniBand HCAs (Host Channel Adapters) direct
peer-to-peer access access to NVIDIA GPU memory without need
without needing to copy data to to host memory.
See the chapter "GPUDirect RDMA Peer Memory Client" in the
README for details.
* Added support for the VK_EXT_provoking_vertex extension.
* Initial support for hardware accelerated OpenGL and Vulkan
rendering on Xwayland. See the chapter "OpenGL and Vulkan on
Xwayland" in the README for details.
* Fixed a bug that could cause intermittent corruption in
Wolfenstein: Youngblood when using NVIDIA Kepler, Maxwell,
Pascal, and Volta GPUs.
* Fixed a bug that could cause games running with DXVK to crash
with Xid 31 (MMU Fault) errors when using NVIDIA Pascal GPUs.
* Added support for the VK_EXT_extended_dynamic_state2 extension.
* Added support for the VK_EXT_color_write_enable extension.
* Added support for the VK_EXT_vertex_input_dynamic_state extension.
* Added support for the VK_EXT_ycbcr_2plane_444_formats extension.
* Added support for the VK_NV_inherited_viewport_scissor extension.
* NvFBC's "direct capture" mode no longer causes flipping to be
disabled for applications being captured. G-SYNC can now also be
used simultaneously with NvFBC direct capture.
* Deprecated NvIFROpenGL support.Release 470 will be the last to
support this functionality.NvIFROpenGL header files, samples and
documentation were removed from the NVIDIA Capture SDK 7.1.9
release.Future drivers will remove libnvidia-ifr.so and any other
reference to NvIFROpenGL.
For details please see:
https://developer.nvidia.com/nvidia-video-codec-sdk
* Fixed a bug that prevented Vulkan direct-to-display from working
when DRM KMS is enabled.
* Enabled the NVIDIA driver, by default, to attempt to initialize
SLI when using GPUs with different amounts of video memory.
Previously, this was only available when bit 1 was set in the
"Coolbits" X config option.
* Updated GPU fan control to be available by default in
nvidia-settings and NV-CONTROL, for GPU boards that support
programmable fan control. Previously, this was only available
when bit 2 was set in the "Coolbits" X config option.
* Fixed an issue where vkCreate{Graphics,Compute}Pipeline would
sometimes crash when the shaders contained resources with
no set/binding.
* Fixed a memory fault in the Vulkan driver when using some
smaller dimensions of sparse images.
* Fixed an issue with vkCmdSetViewport when firstViewport is
non-zero.
* Fixed handling of
VK_DESCRIPTOR_BINDING_VARIABLE_DESCRIPTOR_COUNT_BIT for
variable size descriptor bindings.
* Added gsp.bin firmware file which is used to offload the
GPU initialization and management tasks on some GPUs. See the
"GSP Firmware" chapter in the README for more information.
* Worked around a bug in Meson builds of libglvnd 1.3.0 that
caused the nvidia_icd.json file to be installed in the wrong
location.

------------------------------------------------------------------
Thu 20 May 21:59:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 465.31

* Added support for the following GPUs:
GeForce RTX 3050 Ti Laptop GPU
GeForce RTX 3050 Laptop

* Fixed a bug that could cause AddressSanitizer to report a
heap-buffer-overflow during initialization of the OpenGL and
Vulkan libraries.

------------------------------------------------------------------
Fri 7 May 21:33:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 465.27

* Added support for the following GPUs:
T600 Laptop GPU
T1200 Laptop GPU
RTX A5000 Laptop GPU
RTX A4000 Laptop GPU
RTX A3000 Laptop GPU
RTX A2000 Laptop GPU

* Fixed a bug that could prevent a system from resuming from
suspend when DisplayPort activity occurred while the system
was suspended.
* Fixed a regression that prevented eglQueryDevicesEXT from
correctly enumerating GPUs on systems with multiple GPUs
where access to the GPU device files was restricted for some
GPUs.
* Fixed a regression that could cause system hangs when
changing display resolution on SLI Mosaic configurations.
* Fixed a bug that could result in blank displays when driving
multiple displays at the same resolution using active
DisplayPort dongles.

------------------------------------------------------------------
Thu 29 Apr 21:33:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 465.24.02

* Added support for the following GPUs:
RTX A4000
RTX A5000

* Updated the nvidia-settings control panel to be more consistent
about displaying layout controls which are only applicable for
some displays or GPUs connected to the system.
* Improved X11 DrawText() performance when rendering stippled text.
* Fixed a bug that could prevent some hardware configurations with
large numbers of displays connected to the same GPU from working
correctly.
* Fixed a bug that could cause multi-threaded GLX applications to
hang while attempting to handle an XError.
* Fixed a potential crash in the Vulkan driver when clearing
images with multiple layers.
* Fixed a bug with the host-visible device-local memory heap,
where if an allocation failed due to space constraints, it could
cause the application to crash on future Vulkan function calls.
* Fixed corruption in the Vulkan driver that sometimes occurred
with shadow rendering with image arrays.
* Added support for the VK_KHR_synchronization2 extension.
* Added support for the VK_KHR_workgroup_memory_explicit_layout
extension.
* Added support for the VK_KHR_zero_initialize_workgroup_memory
extension.
* Added support for linear images for use with host-visible video
memory in Vulkan.
* Fixed an issue with OpenGL where imported Vulkan buffers would
fail with GL_OUT_OF_MEMORY when marked as resident.
* Fixed a bug that caused the NVIDIA driver to retain an incorrect
memory mapping of the UEFI system console when booting with the
kernel parameter pci=realloc. This could cause the console to
corrupt memory in use by the NVIDIA driver, and vice versa.
* Runtime D3 Power Management is now enabled by default on
supported notebook systems with Ampere or newer GPUs. See the
chapter titled "PCI-Express Runtime D3 (RTD3) Power Management"
in the README for further details.
* Updated the .run package installer to install and enable the
nvidia-suspend.service, nvidia-hibernate.service, and
nvidia-resume.service systemd units. These units are used when
the NVreg_PreserveVideoMemoryAllocations=1 nvidia module parameter
is specified to provide advanced suspend, hibernate, and resume
functionality.
See the chapter titled "Configuring Power Management Support"
in the README for more information.
This functionality can be disabled by passing the --no-systemd
parameter to the installer.
* Updated the NVIDIA X driver to allow OpenGL applications running
on an X server that has left the active virtual terminal (VT)
to continue running on the GPU, but with a limited frame rate.
This functionality is only enabled when the
NVreg_PreserveVideoMemoryAllocations=1 nvidia module parameter
is enabled.
* Fix a Vulkan clamping bug where fragment depth values would
not be clamped to the range [0,1] if
VK_EXT_depth_range_unrestricted was not enabled.
* Fix a bug related to SPIR-V 1.4 non-Input/Output entry point
variables.
* Fixed a bug in compilation of SPIR-V intersection shaders when
modules with multiple entry points are used.

------------------------------------------------------------------
Mon 05 Apr 21:33:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 465.19.01

* Updated the nvidia-settings control panel to be more consistent
about displaying layout controls which are only applicable for
some displays or GPUs connected to the system.
* Improved X11 DrawText() performance when rendering stippled text.
* Fixed a bug that could prevent some hardware configurations with
large numbers of displays connected to the same GPU from working
correctly.
* Fixed a bug that could cause multi-threaded GLX applications to
hang while attempting to handle an XError.
* Fixed a potential crash in the Vulkan driver when clearing
images with multiple layers.
* Fixed a bug with the host-visible device-local memory heap,
where if an allocation failed due to space constraints, it could
cause the application to crash on future Vulkan function calls.
* Fixed corruption in the Vulkan driver that sometimes occurred
with shadow rendering with image arrays.
* Added support for the VK_KHR_synchronization2 extension.
* Added support for the VK_KHR_workgroup_memory_explicit_layout
extension.
* Added support for the VK_KHR_zero_initialize_workgroup_memory
extension.
* Added support for linear images for use with host-visible video
memory in Vulkan.
* Fixed an issue with OpenGL where imported Vulkan buffers would
fail with GL_OUT_OF_MEMORY when marked as resident.
* Fixed a bug that caused the NVIDIA driver to retain an incorrect
memory mapping of the UEFI system console when booting with the
kernel parameter pci=realloc. This could cause the console to
corrupt memory in use by the NVIDIA driver, and vice versa.
* Runtime D3 Power Management is now enabled by default on
supported notebook systems with Ampere or newer GPUs. See the
chapter titled "PCI-Express Runtime D3 (RTD3) Power Management"
in the README for further details.
* Updated the .run package installer to install and enable the
nvidia-suspend.service, nvidia-hibernate.service, and
nvidia-resume.service systemd units. These units are used when
the NVreg_PreserveVideoMemoryAllocations=1 nvidia module
parameter is specified to provide advanced suspend, hibernate,
and resume functionality.
See the chapter titled "Configuring Power Management Support"
in the README for more information.
This functionality can be disabled by passing the --no-systemd
parameter to the installer.
Updated the NVIDIA X driver to allow OpenGL applications
running on an X server that has left the active virtual
terminal (VT) to continue running on the GPU, but with a
limited frame rate.
This functionality is only enabled when the
NVreg_PreserveVideoMemoryAllocations=1 nvidia module
parameter is enabled.
* Fix a Vulkan clamping bug where fragment depth values would not
be clamped to the range [0,1] if
VK_EXT_depth_range_unrestricted was not enabled.
* Fix a bug related to SPIR-V 1.4 non-Input/Output entry point
variables.
* Fixed a bug in compilation of SPIR-V intersection shaders when
modules with multiple entry points are used.

------------------------------------------------------------------
Mon 05 Apr 20:51:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 460.67

* Fixed a bug where using ray tracing extensions on multi-GPU
setups could result in application instability if the GPUs did
not match.
* Fixed an issue that prevented G-SYNC from working properly
after a mode switch on Kepler-based GPUs.
* Fixed a driver installation failure on Linux kernel 5.11
release candidates, where the NVIDIA kernel module failed to
build with error "error: implicit declaration of function
'sys_close'".
* Fixed a bug where vkCreateSwapchain could cause the X Server
to crash when an invalid imageFormat was provided.
* Fixed a driver installation failure on Linux kernel 5.11
release candidates, where the NVIDIA kernel module failed to
build with error "fatal error: asm/kmap_types.h: No such file
or directory".

------------------------------------------------------------------
Sun 14 Mar 01:51:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 460.56

* Added support for the following GPUs:
GeForce RTX 3060
* Fixed a bug with indexed ray payloads in Vulkan.
* Fixed a bug where calls to vkCreateDevice could fail on
Ampere GPUs when ray tracing extensions were enabled and the
application was running within the Steam Linux Runtime.
* Fixed a regression that could cause display corruption when
using a scaled resolution after resuming from power management
suspend.

------------------------------------------------------------------
Sat 13 Feb 15:46:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 460.39

* Added support for the following GPUs:
GeForce RTX 3080 Laptop GPU
GeForce RTX 3070 Laptop GPU
GeForce RTX 3060 Laptop GPU
GeForce GT 1010
* Updated the NVIDIA driver to restore functionality of some
features, including runtime power management, hotplugging
audio-capable display devices, and S0ix-based system suspend,
with recent kernels such as Linux 5.10.
* Fixed a bug that caused bindless texture samplers to be
incorrectly counted towards the
MAX_COMPUTE_TEXTURE_IMAGE_UNITS limit.
* Fixed a bug that could cause the GPU to hang when attempting
to perform link training on an HDMI 2.1 Fixed Rate Link (FRL)
display, while the display is powered off.
* Fixed a bug that could intermittently cause NvFBC applications
to fail with the error message "Unable to send exported fds".

------------------------------------------------------------------
Sat 9 Jan 18:21:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 460.32.03

* Added support for the following GPUs:
RTX A6000
* Fixed a bug that could cause detailed timing information for
displays with a large number of detailed timings to be
truncated in the X log.
* Fixed a bug that prevented scaled display resolutions configured
via the nvidia-settings control panel from being reported by
RandR.
* Fixed a bug with the SLI Mosaic Mode configuration dialog in
nvidia-settings that left displays enabled when they were not
needed in the selected configuration.
* Added support for RandR rotation and reflection while using an
NVIDIA-driven display as a PRIME Display Offload sink.
* Added support for "Reverse PRIME Bypass", an optimization that
bypasses the bandwidth overhead of PRIME Render Offload and PRIME
Display Offload in conditions where a render offload application
is fullscreen, unredirected, and visible only on a given
NVIDIA-driven PRIME Display Offload output. Use of the
optimization is reported in the X log when verbose logging is
enabled in the X server.
* Add support for the VK_KHR_acceleration_structure extension.
* Add support for the VK_KHR_ray_tracing_pipeline extension.
* Add support for the VK_KHR_ray_query extension.
* Add support for the VK_KHR_pipeline_library extension.
* Add support for the VK_KHR_deferred_host_operations extension.
* Removed the MetaMode string truncation warning for older X Servers
when saving the X Configuration file from nvidia-settings.
* Add support for the VK_NV_fragment_shading_rate_enums extension.
* Fixed a bug where copying from an X11 pixmap to an RGB overlay
window would exhibit corruption.
* Fixed an issue with VK_ACCESS_MEMORY_READ_BIT and
VK_ACCESS_MEMORY_WRITE_BIT when used as part of a render pass.
* Add support for the VK_KHR_fragment_shading_rate extension.
* Add support for the VK_KHR_shader_terminate_invocation extension.
* Reduce host memory consumption for descriptor memory in cases
where thep Next chain contains a structure of type
VK_STRUCTURE_TYPE_DESCRIPTOR_SET_VARIABLE_DESCRIPTOR_COUNT_ALLOCATE_INFO.
* Increased the default size for new OpenGL/Vulkan Shader Disk Cache
location to 1024MB. Note that caches with paths containing
"/.nv/ will continue to use the previous default of 128MB unless
the size is manually overridden. For more information see the
"OpenGL Shader Disk Cache" section in the "Specifying OpenGL
Environment Variable Settings" chapter of the README.
* Changed the default location for new OpenGL/Vulkan Shader Disk Caches.
If the location is not manually overridden and a cache is detected
in the previous default location, that location will be used instead
of the new default location. For more information see the
"OpenGL Shader Disk Cache" section in the "Specifying OpenGL
Environment Variable Settings" chapter of the README.
* Add support for the VK_EXT_shader_image_atomic_int64 extension.
* Add support for the VK_KHR_copy_commands2 extension.
* Allow importing cached memory via VK_EXT_external_memory_host.
* Removed support for the following deprecated frame lock NV-CONTROL
attributes:
NV_CTRL_FRAMELOCK_MASTER
NV_CTRL_FRAMELOCK_SLAVES
NV_CTRL_FRAMELOCK_MASTERABLE
NV_CTRL_FRAMELOCK_SLAVEABLE
* Default AllowEmptyInitialConfiguration to True such that the
NVIDIA X driver succeeds when launching the X server even if
there are no display devices connected.
* RRGetCrtcInfo will now return Rotate_0 instead of 0 as the active
rotation for disabled CRTCs.
* Improved the NVIDIA VDPAU implementation of
VdpVideoSurfaceGetBitsYCbCr and VdpVideoSurfacePutBitsYCbCr when
using planar or semi-planar formats. This helps applications
that transfer data between VDPAU video surfaces and system
memory.
* Added initial experimental support for S0ix-based system
suspend (suspend-to-idle). This feature is platform and GPU
dependent, so the feature will be disabled by default. To
enable this feature, refer to the 'powermanagement' section
of the README.
* Fixed an issue where Vulkan applications would fail to
initialize if the connected X11 Server did not expose support
for GLX.
* Improved the memory allocation strategy in nvidia-modeset.ko
to reduce the likelihood of out-of-memory errors, which
typically manifest as "page allocation failure" messages in
the kernel log.

-----------------------------------------------------------------
Sat 9 Jan 18:01:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 460.27.04

------------------------------------------------------------------
Sat 9 Jan 17:15:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 455.45.01

* Added support for the following GPUs:
GeForce RTX 3060 Ti
* Kernel 5.9 support
* Fixed a bug in a Vulkan blending optimization that could produce incorrect results. Some of the Vulkan titles affected by this bug were:
Life is Strange 2
Shadow of the Tomb Raider
* Fixed an issue that caused Vulkan swapchain creation to fail for full-screen windows when a G-SYNC monitor is connected.

------------------------------------------------------------------
Sat 9 Jan 16:53:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 455.38

* Added support for the following GPUs:
GeForce RTX 3070
* Fixed a bug in nvidia-settings that caused the SLI Mosaic
Configuration dialog to position available displays incorrectly
when enabling SLI Mosaic.
* Added support for using an NVIDIA-driven display as a PRIME
Display Offload sink with a PRIME Display Offload source driven
by the xf86-video-intel driver.
* Fixed a bug in a Vulkan barrier optimization that allowed some
back-to-back copies to run unordered.
* Fixed a performance regression in the NVIDIA X driver which
affected some X11 RENDER extension use cases.
* Added AMD Secure Memory Encryption compatibility.

------------------------------------------------------------------
Sat 9 Jan 16:53:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 455.28

* Added support for the following GPUs:
GeForce RTX 3080
GeForce RTX 3090
GeForce MX450
* Fixed a bug that caused X to crash when the NVIDIA RandR
provider was disabled while using an NVIDIA-driven display
as a PRIME Display Offload sink.
* Moved layout configuration of SLI Mosaic displays in
nvidia-settings from its own dedicated page to a dialog
available on the X Server Display Configuration page.
* Fixed a bug that prevented 8K displays from being used in
portrait orientation on Pascal and earlier GPUs.
* Fixed a bug which caused excessive CPU usage in Vulkan
applications which create a large number of VkFence objects.
This was particularly prevalent in the Steam Play title Red
Dead Redemption 2.
* Added support for a new device-local VkMemoryType which is
host-coherent and host-visible. This may result in improved
performance in some applications. Applications which are
known to benefit from this new VkMemoryType include: DXVK
Title DiRT Rally 2.0, Steam Play Title DOOM: Eternal, and
DXVK title World of Warcraft.
* Fixed a bug that caused WebKit-based applications to crash
when running on Wayland.
* Fixed a bug that led to display corruption at some resolutions
when using an NVIDIA-driven display as a PRIME Display Offload
sink.
* Fixed a bug in a SPIR-V optimization that may cause conditional
blocks to not execute.
* Fixed a bug where calls to vkGetRandROutputDisplayEXT with
unexpected inputs would generate X11 protocol errors.
(https://bugs.winehq.org/show_bug.cgi?id=49407)
* Fixed a small memory leak during exit of the NVIDIA EGL
driver.
* Implemented support for the NVIDIA NGX Updater. See the
"NGX" chapter in the README for information on how to configure
this feature.
* Removed support for the SLI modes "SFR", "AFR", and "AA".
SLI Mosaic, Base Mosaic, GL_NV_gpu_multicast, and
GLX_NV_multigpu_context are still supported.
* Updated Base Mosaic support on GeForce to allow a maximum of
five simultaneous displays, rather than three.
* Fixed several synchronization bugs that could momentarily
lock up the X server when moving/resizing/focusing OpenGL
and Vulkan windows when PRIME Sync was enabled.
* Added NVIDIA VDPAU driver support for decoding VP9 10- and
12-bit bitstreams.Note that VDPAU's presentation pipeline and
OpenGL-VDPAU interop does not support 10- and 12-bit video
surfaces yet. See the "VDPAU Support" appendix in the README
for supported decoder profiles.
* Fixed a bug that could cause dual-link DVI to be driven over
a connector that only supports single-link DVI, when
"NoMaxPClkCheck" is specified in the "ModeValidation"
X configuration option. Note this fix may cause behavioral
changes for configurations using this option.
* Fixed a bug where glGetGraphicsResetStatusARB would incorrectly
return GL_PURGED_CONTEXT_RESET_NV immediately after application
start-up if the system had previously been suspended.
* Fixed a regression that allowed displays to enter DPMS mode
even when DPMS is disabled in the X server settings.
* Updated nvidia-settings to allow continued interaction with
other pages and help content while editing application
profiles.

------------------------------------------------------------------
Sun 20 Sep 20:22:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 455.23.04

* Added support for the following GPUs:
GeForce RTX 3080
GeForce RTX 3090
GeForce MX450
* Fixed a bug that prevented 8K displays from being used in
portrait orientation on Pascal and earlier GPUs.
* Fixed a bug which caused excessive CPU usage in Vulkan
applications which create a large number of VkFence objects.
This was particularly prevalent in the Steam Play title
Red Dead Redemption 2.
* Added support for a new device-local VkMemoryType which is
host-coherent and host-visible. This may result in improved
performance in some applications. Applications which are
known to benefit from this new VkMemoryType include:
DXVK Title DiRT Rally 2.0, Steam Play Title DOOM: Eternal,
and DXVK title World of Warcraft.
* Fixed a bug that caused WebKit-based applications to crash
when running on Wayland.
* Fixed a bug that led to display corruption at some
resolutions when using an NVIDIA-driven display as a PRIME
Display Offload sink.
* Fixed a bug in a SPIR-V optimization that may cause
conditional blocks to not execute.
* Fixed a bug where calls to vkGetRandROutputDisplayEXT
with unexpected inputs would generate X11 protocol errors.
(https://bugs.winehq.org/show_bug.cgi?id=49407)
* Fixed a small memory leak during exit of the
NVIDIA EGL driver.
* Implemented support for the NVIDIA NGX Updater. See the
"NGX" chapter in the README for information on how to
configure this feature.
* Removed support for the SLI modes "SFR", "AFR", and "AA".
SLI Mosaic, Base Mosaic, GL_NV_gpu_multicast, and
GLX_NV_multigpu_context are still supported.
* Updated Base Mosaic support on GeForce to allow a maximum
of five simultaneous displays, rather than three.
* Fixed several synchronization bugs that could momentarily
lock up the X server when moving/resizing/focusing OpenGL
and Vulkan windows when PRIME Sync was enabled.
* Added NVIDIA VDPAU driver support for decoding VP9 10- and
12-bit bitstreams. Note that VDPAU's presentation pipeline
and OpenGL-VDPAU interop does not support 10- and 12-bit
video surfaces yet. See the "VDPAU Support" appendix in the
README for supported decoder profiles.
* Fixed a bug that could cause dual-link DVI to be driven over
a connector that only supports single-link DVI, when
"NoMaxPClkCheck" is specified in the "ModeValidation"
X configuration option. Note this fix may cause behavioral
changes for configurations using this option.
* Fixed a regression that allowed displays to enter DPMS mode
even when DPMS is disabled in the X server settings.
* Updated nvidia-settings to allow continued interaction with
other pages and help content while editing application
profiles.

------------------------------------------------------------------
Sun 20 Sep 20:09:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 450.66

* Added support for the following GPUs:

EIZO Quadro MED-XN31LP
EIZO Quadro MED-XN50LP
EIZO Quadro MED-XN51LP
EIZO Quadro MED-XN70
EIZO Quadro MED-XN71
EIZO Quadro MED-XN72
EIZO Quadro MED-XN90
EIZO Quadro MED-XN91
EIZO Quadro MED-XN92
Matrox D-Series D1450
Matrox D-Series D1480
* Fixed triple buffering support of Vulkan X11 swapchains when
applications are syncing to vblank.

------------------------------------------------------------------
Sun 20 Sep 19:49:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 450.57

* Added support for Vulkan direct-to-display on DisplayPort
displays which are connected via DisplayPort
Multi-Stream Transport (DP-MST).
* Added a new documentation file, supported-gpus.json, which
exposes a machine-readable list of supported GPUs and features.
* Added an implementation of glNamedBufferPageCommitmentARB,
which was missing from the NVIDIA driver's support for the
GL_ARB_sparse_buffer extension.
* Fixed a bug that could cause a KDE Plasma session to crash
when running under Wayland.
* Fixed a bug that could cause some Swap Group configurations
to present at half of the display refresh rate.
* Added a new Connector-N display connector name alias type,
with a unique alias assigned to each physical display
connector on a GPU. See the README for more information.
* Fixed a bug that prevented X11 EGL displays from being
reinitialized.
* The 450 driver series is the last that supports
NvFBC's NVFBC_CAPTURE_TO_HW_ENCODER capture interface,
which has been deprecated since NVIDIA Capture SDK 6.0
released in 2017. Future NVIDIA drivers after the 450 series
will return NVFBC_ERR_UNSUPPORTED if that capture interface
is requested. The recommended way to encode captured frames
with NVENC is by using the NVIDIA Video Codec SDK.
See: https://developer.nvidia.com/nvidia-video-codec-sdk
* Implemented support for NVIDIA NGX. A new library,
libnvidia-ngx.so, has been added to support the new
functionality. This new library is needed by applications
which link against any of the following SDKs:

NVIDIA DLSS SDK
NVIDIA NGX SDK
* Fixed a bug which caused Vulkan applications to leak file
descriptors when destroying Vulkan instances.
* Added a fallback presentation path for PRIME Render Offload
configurations where the DRI3 and/or Present extension are
unavailable.
* Fixed a bug where vkCreateSampler would fail with no
borderColor data, even though it wasn't needed.
* Fixed a bug where vkUpdateDescriptorSetWithTemplate would
ignore the stride parameter for some VkDescriptorType values.
* Fixed a bug causing the Plasma desktop panel to freeze when
compositing is disabled
(https://bugs.kde.org/show_bug.cgi?id=353983)
* Improved Vulkan device enumeration under an X.Org X server
environment. See the "Known Issues" in the README for more
information.
* Fixed a visual glitch of Vulkan applications when they stop
flipping due to a window change, such as when alt-tab is
used to change window focus.
* Fixed a bug where XGetImage requests would return stale data
for flipping Vulkan applications. In particular, this fixes
screen-scraping tools such as VNC and import.
* Removed libnvidia-fatbinaryloader.so from the driver package.
This functionality is now built into other driver libraries.
* Extended the dynamic runtime power management support in the
NVIDIA driver to shut off power to video memory under certain
conditions. See the chapter titled "PCI-Express Runtime D3
(RTD3) Power Management" in the README for more information.
* Added HEVC 10/12 bit "decode only" support to
the NVIDIA VDPAU driver. Note that VDPAU's presentation
pipeline and OpenGL-VDPAU interop does not support 10- and
12-bit video surfaces yet. See the "VDPAU Support" appendix
in the README for supported HEVC decoder profiles.
* Added support for Image Sharpening for OpenGL and Vulkan
applications
* Added new VdpYCbCrFormats VDP_YCBCR_FORMAT_Y_U_V_444_16,
VDP_YCBCR_FORMAT_P010 and VDP_YCBCR_FORMAT_P016 for accessing
16-bit surfaces via VdpVideoSurfaceGetBitsYCbCr() and
VdpVideoSurfacePutBitsYCbCr() in the NVIDIA VDPAU driver.
* Added support to create 16-bit video surfaces in
the NVIDIA VDPAU driver.
* Modified nvidia-persistenced and libnvidia-ml (NVML) to
use libtirpc for communication instead of relying on the
deprecated glibc RPC implementation.
* Enabled GPU screens by default on X.Org xserver version
1.20.7 and higher.
* Fixed a bug where rendering in a separate user namespace
(unshare -U) would show black window and produce Xid 13 errors.
* Removed support for "IgnoreDisplayDevices" X configuration
option.
* Added support for PRIME Synchronization when using displays
driven by the x86-video-amdgpu driver as PRIME display
offload sinks.
* Added support for displays connected to NVIDIA GPUs to act
as PRIME display offload sinks, also known as "Reverse PRIME".
See the chapter titled "Offloading Graphics Display with
RandR 1.4" in the README for additional information.
* Removed 'libGL.la' libtool archive from the install package.
* Fixed a bug that caused a brief orange flash on some
platforms when a display mode is being set.
* Fixed a bug that could cause the X server to crash when
using large cursor images with PRIME display offloading.
* Fixed an interaction problem with 5.4 and newer Linux
kernels that caused a performance regression when allocating
system memory.
* Fixed a driver installation failure on Linux kernel 5.8 release
candidates, where the NVIDIA kernel module failed to build with
error "'struct mm_struct' has no member named 'mmap_sem'".
* Fixed a driver installation failure on Linux kernel 5.8 release
candidates, where the NVIDIA kernel module failed to build with
error "too many arguments to function '__vmalloc'".

------------------------------------------------------------------
Sun 20 Sep 17:51:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 450.51

* Added support for Vulkan direct-to-display on DisplayPort
displays which are connected via DisplayPort Multi-Stream
Transport (DP-MST).
* Added a new documentation file, supported-gpus.json, which
exposes a machine-readable list of supported GPUs and features.
* Added an implementation of glNamedBufferPageCommitmentARB, which
was missing from the NVIDIA driver's support for
the GL_ARB_sparse_buffer extension.
* Fixed a bug that could cause a KDE Plasma session to crash when
running under Wayland.
* Fixed a bug that could cause some Swap Group configurations to
present at half of the display refresh rate.
* Added a new Connector-N display connector name alias type, with
a unique alias assigned to each physical display connector on
a GPU. See the README for more information.
* Fixed a bug that prevented X11 EGL displays from being
reinitialized.
* The 450 driver series is the last that supports NvFBC's
NVFBC_CAPTURE_TO_HW_ENCODER capture interface, which has been
deprecated since NVIDIA Capture SDK 6.0 released in 2017.
Future NVIDIA drivers after the 450 series will return
NVFBC_ERR_UNSUPPORTED if that capture interface is requested.
The recommended way to encode captured frames with NVENC is
by using the NVIDIA Video Codec SDK.
See: https://developer.nvidia.com/nvidia-video-codec-sdk
* Implemented support for NVIDIA NGX. A new library,
libnvidia-ngx.so, has been added to support the new functionality.
This new library is needed by applications which link against
any of the following SDKs:

NVIDIA DLSS SDK
NVIDIA NGX SDK
* Fixed a bug which caused Vulkan applications to leak file
descriptors when destroying Vulkan instances.
* Added a fallback presentation path for PRIME Render Offload
configurations where the DRI3 and/or Present extension are
unavailable.
* Fixed a bug where vkCreateSampler would fail with no borderColor
data, even though it wasn't needed.
* Fixed a bug where vkUpdateDescriptorSetWithTemplate would
ignore the stride parameter for some VkDescriptorType values.
* Fixed a bug causing the Plasma desktop panel to freeze when
compositing is disabled
(https://bugs.kde.org/show_bug.cgi?id=353983)
* Improved Vulkan device enumeration under an X.Org X server
environment. See the "Known Issues" in the README for more
information.
* Fixed a visual glitch of Vulkan applications when they stop
flipping due to a window change, such as when alt-tab is used
to change window focus.
* Fixed a bug where XGetImage requests would return stale data
for flipping Vulkan applications. In particular, this fixes
screen-scraping tools such as VNC and import.
* Removed libnvidia-fatbinaryloader.so from the driver package.
This functionality is now built into other driver libraries.
* Extended the dynamic runtime power management support in the
NVIDIA driver to shut off power to video memory under certain
conditions.
See the chapter titled "PCI-Express Runtime D3 (RTD3) Power
Management" in the README for more information.
* Added HEVC 10/12 bit "decode only" support to the
NVIDIA VDPAU driver.
Note that VDPAU's presentation pipeline and OpenGL-VDPAU
interop does not support 10- and 12-bit video surfaces yet.
See the "VDPAU Support" appendix in the README for supported
HEVC decoder profiles.
* Added support for Image Sharpening for OpenGL and Vulkan
applications
* Added new VdpYCbCrFormats VDP_YCBCR_FORMAT_Y_U_V_444_16,
VDP_YCBCR_FORMAT_P010 and VDP_YCBCR_FORMAT_P016 for accessing
16-bit surfaces via VdpVideoSurfaceGetBitsYCbCr() and
VdpVideoSurfacePutBitsYCbCr() in the NVIDIA VDPAU driver.
* Added support to create 16-bit video surfaces in the
NVIDIA VDPAU driver.
* Modified nvidia-persistenced and libnvidia-ml (NVML) to
use libtirpc for communication instead of relying on the
deprecated glibc RPC implementation.
* Enabled GPU screens by default on X.Org xserver version
1.20.7 and higher.
* Fixed a bug where rendering in a separate user namespace
(unshare -U) would show black window and produce Xid 13 errors.
* Removed support for "IgnoreDisplayDevices" X configuration
option.
* Added support for PRIME Synchronization when using displays
driven by the x86-video-amdgpu driver as PRIME display
offload sinks.
* Added support for displays connected to NVIDIA GPUs to act as
PRIME display offload sinks, also known as "Reverse PRIME".
See the chapter titled "Offloading Graphics Display with
RandR 1.4" in the README for additional information.
* Removed 'libGL.la' libtool archive from the install package.

------------------------------------------------------------------
Sun 20 Sep 17:40:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.100

* Added a workaround for some Pascal based notebooks, where the
GPU could fall off the bus when idle.
* Added support for the following GPUs:

GeForce GTX 1650 Ti
GeForce GTX 1650 Ti with Max-Q Design
GeForce RTX 2060 with Max-Q Design
Quadro T1000 with Max-Q Design

* Added new "Connector-N" display device aliases to
the X driver's X configuration option parser. This is useful
in conjunction with the "ConnectedMonitor" X configuration
option, for emulating the presence of connected monitors
without knowing what specific connectors are available.
See the "Display Device Names" appendix in the README for
details.

------------------------------------------------------------------
Sun 20 Sep 17:24:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.82

* Added a workaround for Steam Play title DOOM Eternal, which
overrides application requested memory locations, to ensure
performance-critical resources be placed in video memory.
* Allow presenting from queue families which only expose
VK_QUEUE_COMPUTE_BIT when using XCB in addition to Xlib
surfaces.
* Fixed a bug that caused render-offloaded applications to
crash on exit.
* Fixed a driver installation failure on Linux kernel 5.6 release
candidates, where the NVIDIA kernel module failed to build with
error "implicit declaration of function 'timespec_to_ns'".
* Fixed a driver installation failure on Linux kernel 5.6 release
candidates, where the NVIDIA kernel module failed to build with
error "implicit declaration of function 'getrawmonotonic'".
* Fixed a driver installation failure on Linux kernel 5.6 release
candidates, where the NVIDIA kernel module failed to build with
error "implicit declaration of function 'timespec_to_ns'".
* Fixed a driver installation failure on Linux kernel 5.6 release
candidates, where the NVIDIA kernel module failed to build with
error "implicit declaration of function 'getrawmonotonic'".
* Fixed a driver installation failure on Linux kernel 5.6 release
candidates, where the NVIDIA kernel module failed to build with
error "implicit declaration of function 'getnstimeofday'".
* Fixed a driver installation failure on Linux kernel 5.6 release
candidates, where the NVIDIA kernel module failed to build with
error "dereferencing pointer to incomplete
type 'struct timeval'".
* Fixed a driver installation failure on Linux kernel 5.6 release
candidates, where the NVIDIA kernel module failed to build with
error "implicit declaration of function 'jiffies_to_timespec'".
* Fixed driver installation failure on Linux kernel 5.6 release
candidates, where the NVIDIA kernel module failed to build with
error "passing argument 4 of 'proc_create_data' from
incompatible pointer type".

------------------------------------------------------------------
Mon 6 Apr 19:30:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.64

* Added support for the following GPUs:

GeForce MX330
GeForce MX350

* Fixed a regression that allowed displays to enter DPMS mode
even when DPMS is disabled in the X server settings.
* Fixed driver installation failure on Linux kernel 5.6 release
candidates, where the NVIDIA kernel module failed to build
with error "implicit declaration of function 'ioremap_nocache'".

------------------------------------------------------------------
Mon 6 Apr 19:25:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.59

* Disabled frame rate limiting for configurations without
active displays when HardDPMS is enabled.
* Restricted the maximum number of GPU Screens to one GPU
Screen per GPU device, to prevent X from crashing when more
than one GPU Screen is configured for a single GPU device.
* Fixed a bug that could cause the X server to crash while
exiting DPMS with HardDPMS enabled.
* Added a default filename when saving the Display Configuration
file in nvidia-settings if an existing configuration file is
not detected.
* Added support for audio over DisplayPort Multi-Stream. This
support requires Linux kernel version 5.5 or newer.
* Updated the NVIDIA driver to allow NVIDIA High Definition Audio
(HDA) controllers to respond to display hotplug events while
the HDA is runtime-suspended.
* Fixed a bug that caused DXVK titles to endlessly loop during
shader compilation if no OpSource instruction was present.
* Add PRIME Synchronization support for Linux kernel 5.4 and
newer.

------------------------------------------------------------------
Mon 6 Jan 23:15:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.44

* Added support for the following GPU:
Quadro T2000 with Max-Q Design
* Added support for the __GL_SYNC_DISPLAY_DEVICE environment
variable for Vulkan applications.
* Fixed a bug that caused applications running directly on a
display (such as VR HMDs) to tear when a G-SYNC or G-SYNC
Compatible monitor is plugged in the system.
* Fixed a bug in an error handling path that could cause a
kernel crash while loading nvidia.ko.
* Fixed driver installation failure on Oracle Linux 7.7 systems,
where the NVIDIA kernel module failed to build with error
"unknown type name 'vm_fault_t'".

------------------------------------------------------------------
Mon 6 Jan 23:05:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.36

* Added support for the following GPUs:
GeForce GTX 1650 SUPER
* Fixed graphical corruption that can occur when using glslang
SPIR-V Generator Version <= 2.
* Updated nvidia-settings to allow continued interaction with
other pages and help content while editing application profiles.

------------------------------------------------------------------
Mon 6 Jan 22:05:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.31

* Added support for the following GPUs:
GeForce GTX 1660 SUPER
* Fixed a regression in the 440.26 driver that could prevent
the NVIDIA kernel modules from building correctly on systems
localized to a language other than English.
* Fixed a bug that could cause the X server to crash when running
applications using GLX indirect rendering.
* Updated the Module.symvers sanity check, which is part of the
NVIDIA kernel module build process, to accommodate the recent
addition of a new field in the Module.symvers file format. This
fixes the error "The Module.symvers file is missing [...]" seen
during driver installation or DKMS rebuilds with Linux 5.4 RC
kernels.
* Fixed kernel module build problems with Linux kernel 5.4.0
release candidates.
* Updated nvidia-bug-report.sh to collect information about
X server crashes from coredumpctl, when available.
* Updated the nvidia-drm kernel module for compatibility with
the removal of the DRIVER_PRIME flag in recent Linux kernel
versions.
* Updated the confirmation dialog box that is displayed when
quitting the nvidia-settings control panel to report when
there are pending configuration changes which will be lost if
they are not applied or saved before quitting.
* Enabled parallel GLSL shader linking by default; i.e., allow
GL_ARB_parallel_shader_compile to work without first calling
glMaxShaderCompilerThreadsARB().
* Added support for HDMI 2.1 variable refresh rate (VRR)
G-SYNC Compatible monitors on supported GPUs.For more details,
see "Configuring Multiple Display Devices on One X Screen"
in the README.
* Added support for the GLX_NV_multigpu_context and
GL_NV_gpu_multicast extensions.For more details, see the
"Configuring SLI and Multi-GPU FrameRendering" chapter of the
README, and the extension specifications:
https://www.khronos.org/registry/OpenGL/extensions/NV/
GLX_NV_multigpu_context.txt
https://www.khronos.org/registry/OpenGL/extensions/NV/
NV_gpu_multicast.txt
* Fixed a bug that prevented Vulkan applications running on
systems configured for SLI. Vulkan applications can now run
while SLI is enabled; however, they will only be able to use
a single GPU.
* Simplified the nvidia-sleep.sh sample script to no longer
depend on unreliable detection of the current VT through
X server logs.
* Added EGL support for PRIME render offload. Please see the
PRIME Render Offload chapter in the README for configuration
details.
* Fixed a regression introduced in 435.19.02 that would cause
some applications which use the VK_KHR_DISPLAY extension to
result in a segmentation fault.
* Enabled HardDPMS by default. See the README entry on the
X configuration option "HardDPMS" for more information.
* Fixed a bug which caused corruption in the following
DXVK titles:
Saints Row IV
Saints Row: The Third
* Added VP9 decode support to the NVIDIA VDPAU driver. See the
VDPAU Support appendix in the README for supported VP9 decoder
profiles.
* Fixed a bug that could cause heapUsage values reported by
VK_EXT_memory_budget to not immediately update after
vkFreeMemory was called.
* Changed GPU clock management strategy to more quickly ramp
down clocks after a drop in GPU utilization.
* Added X configuration option, "SidebandSocketPath", which
controls the directory in which the X driver will create
a pathname UNIX domain socket used to communicate with the
NVIDIA OpenGL, Vulkan and VDPAU driver components.
* The X driver will now create a fallback pathname UNIX domain
socket in the directory specified by the "SidebandSocketPath"
option, or /var/run by default, which will be used by other
NVIDIA driver components if they are unable to connect to the
default abstract socket.This fixes a bug where graphics
applications run within a network namespace (which prevents
the use of abstract sockets) were unable to take advantage of
some driver features, such as G-Sync.
* Fall back to system memory when video memory is full for some
driver-internal allocations. This can help fix Xid 13 and
Xid 31 cases in Vulkan applications when video memory is full.
* Fixed a bug that could cause a blank screen on some
DisplayPort monitors when logging in to GNOME, if the
nvidia-drm kernel module parameter modeset=1 is specified.
* Fixed a bug that prevented NVIDIA GPUs from entering the
low-power D3 state when entering suspend-to-idle (s2idle).
Note that on some systems this may expose an existing timing
issue in the Linux kernel; see the "Known Issues and
Workarounds" section of the "Configuring Power Management
Support" chapter of the README for more details.

------------------------------------------------------------------
Mon 6 Jan 20:49:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.26

* Added support for the following GPUs:
GeForce GTX 1660 SUPER

* Updated the confirmation dialog box that is displayed when
quitting the nvidia-settings control panel to report when there
are pending configuration changes which will be lost if they
are not applied or saved before quitting.

* Enabled parallel GLSL shader linking by default; i.e., allow
GL_ARB_parallel_shader_compile to work without first calling
glMaxShaderCompilerThreadsARB().
* Added support for HDMI 2.1 variable refresh rate (VRR)
G-SYNC Compatible monitors on supported GPUs.For more details,
see "Configuring Multiple Display Devices on One X Screen" in
the README.
* Added support for the GLX_NV_multigpu_context and
GL_NV_gpu_multicast extensions.For more details, see the
"Configuring SLI and Multi-GPU FrameRendering" chapter of the
README, and the extension specifications:

https://www.khronos.org/registry/OpenGL/extensions/NV/
GLX_NV_multigpu_context.txt https://www.khronos.org/
registry/OpenGL/extensions/NV/NV_gpu_multicast.txt

* Fixed a bug that prevented Vulkan applications running on
systems configured for SLI. Vulkan applications can now run
while SLI is enabled; however, they will only be able to use
a single GPU.
* Simplified the nvidia-sleep.sh sample script to no longer
depend on unreliable detection of the current VT through
X server logs.
* Added EGL support for PRIME render offload. Please see the
PRIME Render Offload chapter in the README for configuration
details.
* Fixed a regression introduced in 435.19.02 that would cause
some applications which use the VK_KHR_DISPLAY extension to
result in a segmentation fault.
* Enabled HardDPMS by default. See the README entry on the
X configuration option "HardDPMS" for more information.
* Fixed a bug which caused corruption in the following
DXVK titles:

Saints Row IV
Saints Row: The Third

* Added VP9 decode support to the NVIDIA VDPAU driver. See the
VDPAU Support appendix in the README for supported VP9 decoder
profiles.
* Fixed a bug that could cause heapUsage values reported by
VK_EXT_memory_budget to not immediately update after
vkFreeMemory was called.
* Changed GPU clock management strategy to more quickly ramp
down clocks after a drop in GPU utilization.
* Added X configuration option, "SidebandSocketPath", which
controls the directory in which the X driver will create a
pathname UNIX domain socket used to communicate with the
NVIDIA OpenGL, Vulkan and VDPAU driver components.
* The X driver will now create a fallback pathname UNIX domain
socket in the directory specified by the "SidebandSocketPath"
option, or /var/run by default, which will be used by other
NVIDIA driver components if they are unable to connect to the
default abstract socket.This fixes a bug where graphics
applications run within a network namespace (which prevents
the use of abstract sockets) were unable to take advantage of
some driver features, such as G-Sync.
* Fall back to system memory when video memory is full for some
driver-internal allocations. This can help fix Xid 13 and
Xid 31 cases in Vulkan applications when video memory is full.
* Fixed a bug that could cause a blank screen on some DisplayPort
monitors when logging in to GNOME, if the nvidia-drm kernel
module parameter modeset=1 is specified.
* Fixed a bug that prevented NVIDIA GPUs from entering the
low-power D3 state when entering suspend-to-idle (s2idle).
Note that on some systems this may expose an existing timing
issue in the Linux kernel; see the "Known Issues and
Workarounds" section of the "Configuring Power Management
Support" chapter of the README for more details.

------------------------------------------------------------------
Sat 5 Oct 00:23:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 435.21

* Fixed a bug that caused the X server to crash when using
HardDPMS with an NVIDIA-driven GPU Screen.
* Fixed a bug which caused the kernel to panic when exiting
a single X server when multiple X servers were active and in
an SLI configuration.
* Fixed a regression introduced in the 430.* series of releases
that caused a segmentation fault in libnvcuvid.so while using
Video Codec SDK APIs on certain graphics boards.
* Added initial experimental support for runtime D3 (RTD3) power
management on Turing notebook GPUs.
* Improved nvidia-bug-report.sh to collect runtime D3 (RTD3) power
management information.
* Improved nvidia-bug-report.sh to collect ACPI tables when the
acpidump tool is available.
* Added Vulkan and OpenGL+GLX support for PRIME render offload.
Please see the PRIME Render Offload chapter in the README for
system requirements and configuration details.
* Added support for changing Digital Vibrance in the display
controls section of nvidia-settings on Turing hardware.
* Fixed the cuvidParseVideoData API in the NVCUVID driver to
correctly propagate errors returned by the PFNVIDSEQUENCECALLBACK
callback function to the application.
* Fixed a bug that caused the NVIDIA X driver to behave incorrectly
or crash when a client queried Xinerama information on X servers
with a non-NVIDIA X screen as screen 0.
* Fixed the "Image Settings" options in the "OpenGL Settings" page
of nvidia-settings for Quadro GPUs. Previously, OpenGL rendering
on Quadro would behave as if the "High Quality" option were
selected regardless of the selection. Now, the setting will
default to "High Quality" for Quadro but selecting a lower option
will affect rendering accordingly. (Other GPUs are unchanged: the
default remains "Quality", but other options can be selected if
desired.)
* Fixed a bug that could cause Vulkan applications to generate
spurious warning messages about a missing NV-GLX extension.
* Removed the non-GLVND OpenGL libraries from the NVIDIA Linux
driver installation package. The GLVND OpenGL libraries were
introduced in release 361.16, and have been installed by default
since release 364.12, with the non-GLVND versions available as
an alternative via the "--no-glvnd-glx-client" and
"--no-glvnd-egl-client" installer options. As the non-GLVND
libraries are no longer included in the installation package,
these options will no longer have any effect.
* Fixed a bug that prevented nvidia-drm from marking preferred
modes properly when reporting display information via the
DRM-KMS API.
* Updated nvidia-installer to make compiler mismatches non-fatal
when adding precompiled kernel interfaces to an installer
package using the "--add-this-kernel" option, to be more
consistent with the behavior when installing without
precompiled interfaces.
* Fixed the NvEncodeAPI driver to correctly reject the encoding
of sequences with resolutions smaller than what the NVENC
supports.
* Fixed display color range handling on pre-Turing GPUs, such
that when limited color range is selected through the display
controls page in nvidia-settings, output pixel values will be
correctly clamped to Consumer Technology Association (CTA)
range.

------------------------------------------------------------------
Fri 4 Oct 23:37:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 435.17

* Fixed a bug which caused the kernel to panic when exiting a
single X server when multiple X servers were active and in an
SLI configuration.
* Fixed a regression introduced in the 430.* series of releases
that caused a segmentation fault in libnvcuvid.so while using
Video Codec SDK APIs on certain graphics boards.
* Added initial experimental support for runtime D3 (RTD3) power
management on Turing notebook GPUs.
* Improved nvidia-bug-report.sh to collect runtime D3 (RTD3)
power management information.
* Improved nvidia-bug-report.sh to collect ACPI tables when the
acpidump tool is available.
* Added Vulkan and OpenGL+GLX support for PRIME render offload.
Please see the PRIME Render Offload chapter in the README for
system requirements and configuration details.
* Added support for changing Digital Vibrance in the display
controls section of nvidia-settings on Turing hardware.
* Fixed the cuvidParseVideoData API in the NVCUVID driver to
correctly propagate errors returned by the
PFNVIDSEQUENCECALLBACK callback function to the application.
* Fixed a bug that caused the NVIDIA X driver to behave
incorrectly or crash when a client queried Xinerama
information on X servers with a non-NVIDIA X screen as
screen 0.
* Fixed the "Image Settings" options in the "OpenGL Settings"
page of nvidia-settings for Quadro GPUs. Previously, OpenGL
rendering on Quadro would behave as if the "High Quality"
option were selected regardless of the selection. Now, the
setting will default to "High Quality" for Quadro but
selecting a lower option will affect rendering accordingly.
(Other GPUs are unchanged: the default remains "Quality", but
other options can be selected if desired.)
* Fixed a bug that could cause Vulkan applications to generate
spurious warning messages about a missing NV-GLX extension.
* Removed the non-GLVND OpenGL libraries from the NVIDIA Linux
driver installation package. The GLVND OpenGL libraries were
introduced in release 361.16, and have been installed by default
since release 364.12, with the non-GLVND versions available as
an alternative via the "--no-glvnd-glx-client" and
"--no-glvnd-egl-client" installer options. As the non-GLVND
libraries are no longer included in the installation package,
these options will no longer have any effect.
* Fixed a bug that prevented nvidia-drm from marking preferred
modes properly when reporting display information via the
DRM-KMS API.
* Updated nvidia-installer to make compiler mismatches
non-fatal when adding precompiled kernel interfaces to an
installer package using the "--add-this-kernel" option, to be
more consistent with the behavior when installing without
precompiled interfaces.
* Fixed the NvEncodeAPI driver to correctly reject the encoding
of sequences with resolutions smaller than what the NVENC
supports.

------------------------------------------------------------------
Fri 4 Oct 22:57:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 430.50

* Fixed display color range handling on pre-Turing GPUs,
such that when limited color range is selected through the
display controls page in nvidia-settings, output pixel values
will be correctly clamped to Consumer Technology Association
(CTA) range.

------------------------------------------------------------------
Fri 4 Oct 22:44:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 430.40

* Added support for the following GPUs:
GeForce RTX 2080 SUPER
Quadro RTX 3000 with Max-Q Design
* Fixed a driver installation failure in Linux kernel
configurations with CONFIG_HOTPLUG_CPU.
* Updated nvidia-bug-report.sh to search the systemd journal
for gdm-x-session logs.
* Added support to nvidia-installer for systems which provide
ncurses libraries supporting the ncurses widechar ABI only.

------------------------------------------------------------------
Fri 4 Oct 22:36:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 430.34

* Added support for the following GPUs:

GeForce RTX 2060 SUPER
GeForce RTX 2070 SUPER
GeForce RTX 2080 SUPER
Quadro RTX 4000 with Max-Q Design
Quadro RTX 5000 with Max-Q Design

------------------------------------------------------------------
Sun 23 Jun 22:44:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 430.26

* Added support for the following GPUs:

Quadro P520
Quadro RTX 3000
Quadro T1000
Quadro T2000

* Fixed a bug, introduced in 415.13, that caused audio over
DisplayPort to not work in some configurations.

------------------------------------------------------------------
Sun 23 Jun 22:18:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 430.14

* Improved performance of the Vulkan title, DiRT4.
* Added support for presentation from queue families which only
expose VK_QUEUE_COMPUTE_BIT. This improves performance of
Steam Play title, Wolfenstein II: The New Colossus.
* Fixed a bug that could cause the display to be driven at a low
resolution when configuring PRIME display offloading with
`nvidia-xconfig --prime`.
* Added HEVC YUV 4:4:4 decode support to the NVIDIA VDPAU driver.
* Added the new per-decoder profile capability bit
VDP_DECODER_PROFILE_SUPPORTED_CHROMA_TYPES to the NVIDIA VDPAU
driver.
* Added new VdpYCbCrFormats VDP_YCBCR_FORMAT_Y_UV_444 and
VDP_YCBCR_FORMAT_Y_U_V_444 for accessing YUV 4:4:4 surfaces via
VdpVideoSurfaceGetBitsYCbCr() and VdpVideoSurfacePutBitsYCbCr()
in the NVIDIA VDPAU driver.
* Added support for creation of YUV 4:4:4 video surfaces in the
NVIDIA VDPAU driver.
* Raised the minimum supported X.Org xserver version to 1.7
(video driver ABI version 6).
* Updated the NVIDIA VDPAU driver to support allocating VDPAU
video surfaces with explicit field or frame picture structure.
* Added support for the GL_NV_vdpau_interop2 OpenGL extension,
which allows VDPAU/OpenGL surface sharing with explicit field
or frame picture structure. Picture structure selection by
applications can avoid the need for implicit surface structure
conversion by the OpenGL implementation.
* Updated nvidia-installer to avoid problems with commands whose
proper functionality may be dependent on system localization
(e.g. via the LANG environment variable.) For example, some
kernel configurations may produce unusable kernel modules if
LANG is set to a language other than English.

------------------------------------------------------------------
Sun 23 Jun 20:02:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 430.09

* Added support for the following GPU:
GeForce GTX 1650
GeForce GTX 1650 with Max-Q Design
GeForce GTX 1660 Ti with Max-Q Design
* Fixed a bug that could cause the display to be driven at a low
resolution when configuring PRIME display offloading with
nvidia-xconfig --prime`.
* Added HEVC YUV 4:4:4 decode support to the NVIDIA VDPAU driver.
* Added the new per-decoder profile capability bit
VDP_DECODER_PROFILE_SUPPORTED_CHROMA_TYPES to the NVIDIA
VDPAU driver.
* Added new VdpYCbCrFormats VDP_YCBCR_FORMAT_Y_UV_444 and
VDP_YCBCR_FORMAT_Y_U_V_444 for accessing YUV 4:4:4 surfaces via
VdpVideoSurfaceGetBitsYCbCr() and VdpVideoSurfacePutBitsYCbCr()
in the NVIDIA VDPAU driver.
* Added support for creation of YUV 4:4:4 video surfaces in the
NVIDIA VDPAU driver.
* Raised the minimum supported X.Org xserver version to 1.7
(video driver ABI version 6).
* Updated the NVIDIA VDPAU driver to support allocating VDPAU
video surfaces with explicit field or frame picture structure.
* Added support for the GL_NV_vdpau_interop2 OpenGL extension,
which allows VDPAU/OpenGL surface sharing with explicit field
or frame picture structure. Picture structure selection by
applications can avoid the need for implicit surface structure
conversion by the OpenGL implementation.
* Updated nvidia-installer for better compatibility with ncurses
when libncurses.so.6 exposes the ncurses reentrant ABI, such
as on openSUSE Leap 15 and SUSE Linux Enterprise 15.

------------------------------------------------------------------
Sun 23 Jun 19:53:00 CET 2019 - bumblebee.obs@gmail.com

- Switch to glvnd

------------------------------------------------------------------
Sat 13 Apr 18:07:00 CET 2019 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 418.56

* Added support for the following GPU:
GeForce MX230
GeForce MX250
* Updated nvidia-settings to disable line wrapping when
outputting to a non-terminal in command-line mode.
From GitHub pull request:
https://github.com/NVIDIA/nvidia-settings/pull/37
* Updated the nvidia-settings control panel to more accurately
reflect the current availability of G-SYNC or G-SYNC
compatible display settings.
* Fixed a bug which could sometimes cause Vulkan applications
to lock up the GPU when freeing large chunks of memory on
systems with PRIME enabled.
* Updated the driver to restrict use of the GPU performance
counters to system administrators by default. The previous
more permissive behavior can be restored by setting
NVreg_RestrictProfilingToAdminUsers=0 when loading nvidia.ko.

------------------------------------------------------------------
Mon 4 Mar 00:14:00 CET 2019 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 418.43

* Added support for the following GPU:
GeForce GTX 1660 Ti
GeForce RTX 2070 with Max-Q Design
GeForce RTX 2080 with Max-Q Design
* Fixed a bug that would occasionally cause visual corruption
on some Vulkan titles. This bug was particularly prevalent
on DXVK titles.
* Fixed a bug that caused vkCmdPushConstants to generate Xid 13
messages when executed with VK_SHADER_STAGE_ALL on a compute
queue.
* Added initial support for G-SYNC Compatible monitors.See
the README for details.
* Added support for stereo presentation in Vulkan.
* Fixed a bug that could cause OpenGL applications to crash
after repeated VT-switches.
* Fixed a bug that could sometimes prevent PRIME displays from
being selected in the display settings page of nvidia-settings.
* NVIDIA Video Codec SDK 9.0

A new release of the Video Codec SDK will be available
in Q1 2019. For more information and early access sign-up,
refer to https://developer.nvidia.com/nvidia-video-codec-sdk

The main features available in this release are listed below:
o Support for Turing NVENC/NVDEC.
o The NVDECODE API (also known as the NVCUVID API) has been
updated to support YUV 4:4:4 decoding for HEVC on Turing
GPUs.
o NvEncodeAPI has been updated to support HEVC B-frames on
Turing GPUs.
o NvEncodeAPI adds the capability to output the encoded
bitstream, and motion vectors from motion estimation-only
mode, to video memory. This avoids the overhead of copying
the output from system to video memory for processing
pipelines operating directly on video memory.
o NvEncodeAPI now accepts CUarrays as input buffers. The
SDK contains a sample application to demonstrate how to
feed a Vulkan image to NVENC using the Vulkan-CUDA interop.

* Added NVIDIA optical flow support.

A new library libnvidia-opticalflow.so is included in the
driver package. The NVIDIA optical flow library can be used
for hardware-accelerated computation of optical flow vectors and
stereo disparity values. The API header files, sample
applications and documentation will be available in a separate
Optical Flow SDK package in Q1 2019.

For more information and early access sign-up,
refer to https://developer.nvidia.com/opticalflow-sdk
* Removed libnvidia-wfb.so from the driver package.This module
was only used on X servers that did not provide their own
implementation of libwfb, and all X.Org xserver versions now
supported by the driver do so.
* Updated the VDPAU driver to reject decoding to YUV 4:2:2 video
surfaces.The NVIDIA VDPAU driver always produces YUV 4:2:0
content.Previously, the VDPAU driver implicitly converted a
YUV 4:2:2 video surface to YUV 4:2:0 during decode.Now, the
VDPAU driver will fail the decode request.
* Optimized nvidia-installer to only run depmod(1) once when
installing, rather than twice (once during the uninstall
phase and again when installing new kernel modules).
* Removed the NVreg_UseThreadedInterrupts kernel module
parameter from nvidia.ko. This removes the ability to forcibly
fall back to an older mechanism (tasklets) for running the
bottom-half interrupt handler. Instead, threaded IRQs (the
default since 367.44) are always used.
* Fixed a bug where destroying a direct-to-display swapchain
could crash Vulkan applications.
* Fixed a bug that prevented Vulkan applications from using
the VK_EXT_display_control extension on a display that is
driven by X.
* Improved nvidia-bug-report.sh to grab the output of the
`vulkaninfo` command when it is available.
* Fixed build failures which resulted in errors like "implicit
declaration of function drm_...", when building the NVIDIA DRM
kernel module for Linux kernel 5.0 release candidates.
* Fixed a bug that could prevent nvidia-xconfig from disabling
the X Composite extension on version 1.20 of the X.org X server.
* Fixed a build failure, "too many arguments to function
'get_user_pages'", when building the NVIDIA kernel module for
Linux kernel v4.4.168.
* Fixed a build failure, "implicit declaration of function
do_gettimeofday", when building the NVIDIA kernel module for
Linux kernel 5.0 release candidates.

------------------------------------------------------------------
Mon 4 Mar 00:05:00 CET 2019 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 418.30

* Added initial support for G-SYNC Compatible monitors. See
the README for details.
* Added support for stereo presentation in Vulkan.
* Fixed a bug that could cause OpenGL applications to crash
after repeated VT-switches.
* Fixed a bug that could sometimes prevent PRIME displays from
being selected in the display settings page of nvidia-settings.

* NVIDIA Video Codec SDK 9.0

A new release of the Video Codec SDK will be available
in Q1 2019.
For more information and early access sign-up,
refer to https://developer.nvidia.com/nvidia-video-codec-sdk

The main features available in this release are listed below:
* Support for Turing NVENC/NVDEC.
* The NVDECODE API (also known as the NVCUVID API) has
been updated to support YUV 4:4:4 decoding for HEVC on
Turing GPUs.
* NvEncodeAPI has been updated to support HEVC B-frames on
Turing GPUs. NvEncodeAPI adds the capability to output
the encoded bitstream, and motion vectors from motion
estimation-only mode, to video memory. This avoids the
overhead of copying the output from system to video memory
for processing pipelines operating directly on video memory.
* NvEncodeAPI now accepts CUarrays as input buffers. The
SDK contains a sample application to demonstrate how to
feed a Vulkan image to NVENC using the Vulkan-CUDA interop.

* Added NVIDIA optical flow support.

A new library libnvidia-opticalflow.so is included in the
driver package. The NVIDIA optical flow library can be used
for hardware-accelerated computation of optical flow vectors
and stereo disparity values. The API header files, sample
applications and documentation will be available in a separate
Optical Flow SDK package in Q1 2019.

For more information and early access sign-up,
refer to https://developer.nvidia.com/opticalflow-sdk

* Removed libnvidia-wfb.so from the driver package. This module
was only used on X servers that did not provide their own
implementation of libwfb, and all X.Org xserver versions now
supported by the driver do so.
* Updated the VDPAU driver to reject decoding to YUV 4:2:2 video
surfaces. The NVIDIA VDPAU driver always produces YUV 4:2:0
content. Previously, the VDPAU driver implicitly converted a
YUV 4:2:2 video surface to YUV 4:2:0 during decode. Now, the
VDPAU driver will fail the decode request.
* Optimized nvidia-installer to only run depmod(1) once when
installing, rather than twice (once during the uninstall phase
and again when installing new kernel modules).
* Removed the NVreg_UseThreadedInterrupts kernel module parameter
from nvidia.ko. This removes the ability to forcibly fall back
to an older mechanism (tasklets) for running the bottom-half
interrupt handler. Instead, threaded IRQs (the default since
367.44) are always used.

------------------------------------------------------------------
Sun 6 Jan 17:00:00 CET 2019 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 415.25

* Added support for the following GPU:
TITAN RTX
* Fixed a bug that could prevent display detection from working
on displays connected to some notebook docking stations.
* Fixed a bug which could cause VK_KHR_external_semaphore_fd
operations to fail.

------------------------------------------------------------------
Sun 6 Jan 16:17:00 CET 2019 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 415.23

* Fixed a build failure, "implicit declaration of function
'vm_insert_pfn'", when building the NVIDIA DRM kernel module
for Linux kernel 4.20 release candidates.

------------------------------------------------------------------
Sun 6 Jan 16:04:00 CET 2019 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 415.22

* Fixed a regression that prevented applications based on the
Unity engine from starting.
* Added support for VK_EXT_transform_feedback.
* Fixed a build failure, "unknown type name 'ipmi_user_t'",
when building the NVIDIA kernel module for Linux kernel 4.20
release candidates.

------------------------------------------------------------------
Sun 6 Jan 15:52:00 CET 2019 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 415.18

* Fixed a bug that caused corruption on vkCmdCopyImage calls for
non-2D texture targets.
* Fixed a bug that caused mode switches to fail when an SDI output
board was connected.
* Fixed a bug that could cause rendering corruption in Vulkan
programs.
* Added a new hook script, "pre-unload", to the nvidia-installer
hook script system. This script, if present, will be executed
before nvidia-installer attempts to unload existing NVIDIA
kernel modules.
* Fixed a bug that caused vkGetPhysicalDeviceDisplayPropertiesKHR()
to occasionally return incorrect values for physicalResolution.
* Added the synchronization state for PRIME Displays to
nvidia-settings.
* Improved error reporting in eglSwapBuffers() by generating
codes for some missing error types, and adding additional
detail to the already existing ones.
* Improved the appearance and functionality of the nvidia-settings
control panel when it is resized to small sizes.
* Updated the nvidia-settings control panel to prevent some icons
from being displayed incorrectly while using some GTK+ themes.
* Fixed a bug that could cause WINE to crash on recent OS releases.
* Fixed a bug that could cause an X server crash when exiting
Vulkan applications running on X servers with UBB enabled.
* Fixed an X driver bug that caused the "NoEdidModes" token of
the "ModeValidation" X configuration option to reject non-EDID
modes whose timings matched EDID modes.
* Changed the NvEncCreateBitstreamBuffer API call in the
NvEncodeAPI library to return NV_ENC_ERR_UNIMPLEMENTED instead
of NV_ENC_SUCCESS when the encoder instance is configured to
run in motion estimation-only mode. As an indirect consequence
of this change, users running the AppEncME sample application
from the Video Codec SDK prior to SDK version 8.2.16 will observe
a segmentation fault due to bugs in the NvEncoder class. It is
recommended that users download the latest version of the SDK,
where these bugs have been fixed, from
https://developer.nvidia.com/nvidia-video-codec-sdk.
* Fixed an OpenGL driver bug that caused the upper bounds of
floating-point viewports, specified through the ARB_viewport_array
extension, to be clipped incorrectly.
* Added a new X configuration option "HardDPMS" which is disabled
by default, but can be enabled to put displays to sleep with
modesets rather than VESA DPMS. This may fix some displays that
fail to sleep when DPMS becomes active. "HardDPMS" will be
enabled by default in a future release.
* Raised the minimum supported X.Org xserver version to 1.5
(video driver ABI version 4).
* Enabled the NVreg_EnableBacklightHandler kernel module option
by default.
* Removed the LinuxThreads version of the /usr/lib/libnvidia-tls.so
library and replaced it with the NPTL one that was previously
installed in /usr/lib/tls/. This fixes crashes on Debian systems
when the /etc/ld.so.nohwcap file is present.
* Updated nvidia-installer to allow the --no-cc-version-check
option to disable the compiler version check when installing
with DKMS.
* Changed the minimum required Linux kernel version from 2.6.9
to 2.6.32.
* Fixed an OpenGL bug where conditional rendering
(NV_conditional_render) was incorrectly affecting mipmap
generation.
* Fixed a bug that could cause the X server to hang on systems
booted in legacy VGA mode when using a DisplayPort
Multi-Stream link.

------------------------------------------------------------------
Thu 8 Nov 15:19:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 415.13

* Added a new hook script, "pre-unload", to the nvidia-installer
hook script system. This script, if present, will be executed
before nvidia-installer attempts to unload existing NVIDIA
kernel modules.
* Fixed a bug that caused vkGetPhysicalDeviceDisplayPropertiesKHR()
to occasionally return incorrect values for physicalResolution.
* Added the synchronization state for PRIME Displays to
nvidia-settings.
* Improved error reporting in eglSwapBuffers() by generating codes
for some missing error types, and adding additional detail to the
already existing ones.
* Improved the appearance and functionality of the nvidia-settings
control panel when it is resized to small sizes.
* Updated the nvidia-settings control panel to prevent some icons
from being displayed incorrectly while using some GTK+ themes.
* Fixed a bug that could cause WINE to crash on recent OS releases.
* Fixed a bug that could cause an X server crash when exiting
Vulkan applications running on X servers with UBB enabled.
* Fixed an X driver bug that caused the "NoEdidModes" token of the
"ModeValidation" X configuration option to reject non-EDID modes
whose timings matched EDID modes.
* Changed the NvEncCreateBitstreamBuffer API call in the NvEncodeAPI
library to return NV_ENC_ERR_UNIMPLEMENTED instead of
NV_ENC_SUCCESS when the encoder instance is configured to run in
motion estimation-only mode. As an indirect consequence of this
change, users running the AppEncME sample application from the
Video Codec SDK prior to SDK version 8.2.16 will observe a
segmentation fault due to bugs in the NvEncoder class. It is
recommended that users download the latest version of the SDK,
where these bugs have been fixed, from
https://developer.nvidia.com/nvidia-video-codec-sdk.
* Fixed an OpenGL driver bug that caused the upper bounds of
floating-point viewports, specified through the
ARB_viewport_array extension, to be clipped incorrectly.
* Added a new X configuration option "HardDPMS" which is disabled
by default, but can be enabled to put displays to sleep with
modesets rather than VESA DPMS. This may fix some displays that
fail to sleep when DPMS becomes active. "HardDPMS" will be
enabled by default in a future release.
* Raised the minimum supported X.Org xserver version to 1.5
(video driver ABI version 4).
* Enabled the NVreg_EnableBacklightHandler kernel module
option by default.
* Removed the LinuxThreads version of the
/usr/lib/libnvidia-tls.so library and replaced it with the
NPTL one that was previously installed in /usr/lib/tls/. This
fixes crashes on Debian systems when the /etc/ld.so.nohwcap
file is present.
* Updated nvidia-installer to allow the --no-cc-version-check
option to disable the compiler version check when installing
with DKMS.
* Changed the minimum required Linux kernel version from 2.6.9 to
2.6.32.
* Fixed an OpenGL bug where conditional rendering
(NV_conditional_render) was incorrectly affecting mipmap
generation.
* Fixed a bug that could cause the X server to hang on systems
booted in legacy VGA mode when using a DisplayPort Multi-Stream
link.

------------------------------------------------------------------
Fri 2 Nov 22:54:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 410.73

* Added support for the following GPUs:
Quadro RTX 6000
Quadro RTX 5000
* Added a USB-C display connector type identifier, such that
a display connected using Turing's USB-C connector will be named,
e.g., "USB-C-0" rather than "DP-5". Scripts and configuration
files that use the DP identifier for this connector will be affected.
* Fixed a bug that caused vkGetPhysicalDeviceDisplayPropertiesKHR()
to occasionally return incorrect values for physicalResolution.
* Added the synchronization state for PRIME Displays to
nvidia-settings.

------------------------------------------------------------------
Fri 2 Nov 21:52:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 410.66

* Added support for the following GPUs:

Quadro RTX 6000
Quadro RTX 5000
GeForce RTX 2070
GeForce RTX 2080 Ti
GeForce RTX 2080
Quadro P5200 with Max-Q Design
Quadro P4200 with Max-Q Design
Quadro P2000 with Max-Q Design

* Added a graphics API visual indicator. It can be toggled through
nvidia-settings' "OpenGL Settings" panel, the
__GL_SHOW_GRAPHICS_OSD environment variable, or the
GLShowGraphicsOSD application profile.
See the README for more information.
* Added support for X11 RandR transformations on outputs where
the NVIDIA X driver is used as a synchronized RandR 1.4 output
source (i.e., "PRIME Sync").
* Fixed a bug that caused OpenGL corruption on outputs where
the NVIDIA X driver was used as an RandR 1.4 output source
(i.e., "PRIME"), and the output sink required a software cursor.
* Fixed an X driver RandR output source (i.e., "PRIME") bug that
could cause a duplicate cursor to appear on such outputs.
* Exposed EGL 1.5 in the EGL version string. This does not add
any extra functionality to the EGL driver. All EGL 1.5 features
were already supported through EGL 1.4 plus extensions.
* Added the OptiX ray tracing engine, libnvoptix.so.1, to the
driver package.
This library is loaded by the liboptix.so.* library bundled with
applications that use the OptiX API.
* Updated nvidia-installer to allow the --no-cc-version-check
option to disable the compiler version check when installing
with DKMS.
* Added experimental support for VK_EXT_global_priority.
* Removed support for the VK_NV_glsl_shader Vulkan extension.
This extension was added before the Vulkan ecosystem had mature
SPIR-V compilers and tools. Now that the SPIR-V compilers and
tools have advanced, Vulkan developers are encouraged to use
SPIR-V instead of GLSL.
* Fixed a bug that caused VDPAU-decoded H.265/HEVC content to have
interlaced artifacts when shared with OpenGL through the
GL_NV_vdpau_interop extension.
* Implemented support for Vulkan real-time ray tracing extensions
(VK_NV_raytracing). Two new libraries, libnvidia-rtcore.so and
libnvidia-cbl.so, have been added to support the new functionality.
These new libraries are needed by Vulkan at run-time to expose
the new extension. If they are not found, Vulkan will continue
to work without VK_NV_raytracing support.
* Removed OpenGL header files from the installer package, which
were deprecated and not installed by default since
release 260.19.04, but could still be installed with the
'--opengl-headers' option. If your distribution doesn't provide
a package with headers, up-to-date headers can be found at
these locations:
https://www.khronos.org/registry/OpenGL/index_gl.php
https://github.com/NVIDIA/libglvnd/tree/master/include/GL
* Added a USB-C connector type identifier, such that a display
connected using the USB-C connector that was previously
reported as e.g. DP-5 will now be USB-C-0. Scripts and
configuration files that use the DP identifier for this
connector will be affected.

------------------------------------------------------------------
Mon 8 Oct 23:34:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 410.57

* Added support for the following GPUs:
GeForce RTX 2080 Ti
GeForce RTX 2080
Quadro P5200 with Max-Q Design
Quadro P4200 with Max-Q Design
Quadro P2000 with Max-Q Design
* Added a graphics API visual indicator. It can be toggled
through nvidia-settings' "OpenGL Settings" panel,
the __GL_SHOW_GRAPHICS_OSD environment variable, or
the GLShowGraphicsOSD application profile. See the README
for more information.
* Added support for X11 RandR transformations on outputs where
the NVIDIA X driver is used as a synchronized RandR 1.4
output source (i.e., "PRIME Sync").
* Fixed a bug that caused OpenGL corruption on outputs where
the NVIDIA X driver was used as an RandR 1.4 output source
(i.e., "PRIME"), and the output sink required a software cursor.
* Fixed an X driver RandR output source (i.e., "PRIME") bug that
could cause a duplicate cursor to appear on such outputs.
* Exposed EGL 1.5 in the EGL version string. This does not add
any extra functionality to the EGL driver. All EGL 1.5 features
were already supported through EGL 1.4 plus extensions.
* Added the OptiX ray tracing engine, libnvoptix.so.1, to the
driver package.

This library is loaded by the liboptix.so.* library bundled
with applications that use the OptiX API.

* Updated nvidia-installer to allow the --no-cc-version-check
option to disable the compiler version check when installing
with DKMS.
* Added experimental support for VK_EXT_global_priority.
* Removed support for the VK_NV_glsl_shader Vulkan extension.
This extension was added before the Vulkan ecosystem had mature
SPIR-V compilers and tools. Now that the SPIR-V compilers and
tools have advanced, Vulkan developers are encouraged to use
SPIR-V instead of GLSL.
* Fixed a bug that caused VDPAU-decoded H.265/HEVC content to
have interlaced artifacts when shared with OpenGL through the
GL_NV_vdpau_interop extension.
* Implemented support for Vulkan real-time ray tracing extensions
(VK_NV_raytracing). Two new libraries, libnvidia-rtcore.so and
libnvidia-cbl.so, have been added to support the new
functionality. These new libraries are needed by Vulkan at
run-time to expose the new extension. If they are not found,
Vulkan will continue to work without VK_NV_raytracing support.
* Removed OpenGL header files from the installer package, which
were deprecated and not installed by default since release
260.19.04, but could still be installed with the
'--opengl-headers' option. If your distribution doesn't
provide a package with headers, up-to-date headers can be
found at these locations:
https://www.khronos.org/registry/OpenGL/index_gl.php
https://github.com/NVIDIA/libglvnd/tree/master/include/GL

------------------------------------------------------------------
Wed 21 Aug 16:11:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 396.54

* Fixed a resource leak introduced in the 390 series of drivers
that could lead to reduced performance after starting and
stopping several OpenGL and/or Vulkan applications.

------------------------------------------------------------------
Wed 21 Aug 16:01:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 396.51

* Added support for the following GPU:
Quadro P3200 with Max-Q Design
* Added a new command line option,
--override-file-type-destination, to nvidia-installer.
This option can be used to override the destination of
installed files by file type at installation time.
* Added support for VK_EXT_vertex_attribute_divisor.

------------------------------------------------------------------
Wed 21 Aug 15:11:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 396.45

* Improved recovery of Vulkan direct-to-display applications
after an application hang or crash.
* Fixed a bug that could cause multi-threaded EGL applications
to Crash when exiting.
* Improved compatibility with recent Linux kernels.
* Fixed an intermittent hang of Vulkan applications running
fullscreen when flipping is allowed.
* Removed informational messages that were printed by
nvidiamodeset.ko whenever a GPU device was allocated or freed.
* Fixed a bug that could cause kernel panics when using Quadro
SDI Capture hardware.
* Fixed a bug that caused kwin OpenGL compositing to crash when
launching certain OpenGL applications.
* Fixed an intermittent crash when launching Vulkan applications.
* Fixed an intermittent crash when launching applications through
Wine.
* Fixed a bug that caused the driver, in some low bandwidth
DisplayPort configurations, to not implicitly enable display
dithering. This resulted in visible banding.
* Fixed intermittent hangs of fullscreen Vulkan applications when
focused away (e.g., by using the alt-tab key combination) on
non-composited desktops.
* Increased the version numbers of the GLVND libGL, libGLESv1_CM,
libGLESv2, and libEGL libraries, to prevent concurrently installed
non-GLVND libraries from taking precedence in the dynamic linker
cache.
* Updated the OpenGL driver to allow the use of integer format
(SINT/UINT) color attachments with depth attachments in Frame Buffer Objects.

------------------------------------------------------------------
Sun 6 May 14:12:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 396.24

* Added support for the following GPUs:
GeForce GTX 1050 with Max-Q Design
Quadro P3200
Quadro P4200
* Fixed a regression that caused the current MetaMode's
ViewPortIn and ViewPortOut settings to be preserved across
RandR modesets. The driver now clears ViewPortIn and
ViewPortOut when the mode is set through RandR, restoring
the behavior that existed prior to the regression.
* Improved error reporting in the Vulkan driver if
libnvidia-glvkspirv.so, the new Vulkan SPIR-V compiler added
in 396.24, cannot be found at run time.
* Fixed performance regressions and corruption issues in the
new Vulkan SPIR-V compiler.
* Added support for 32-bit PCI domains throughout the NVIDIA
driver stack. This support is required for running Linux VMs
with recent versions of the pci_hyperv driver on top of Hyper-V.
* Updated the SLI Mosaic configuration page in nvidia-settings
to make more layout configurations available, including
configurations that do not utilize all of the available displays.
* Added reporting of EGL information to nvidia-settings.
* Added support for a new Vulkan SPIR-V compiler which reduces
shader compilation time and shader system memory consumption.

A new environment variable can be used to enable (1) (default)
or disable (0) the new compiler if errors in existing
applications are found:

__GL_NextGenCompiler=<int>

The following application profile setting with the same
definition is also available:

{ "pattern" : [], "profile" : [ "NextGenCompiler", <int> ] }

The old compiler is deprecated and will be removed in a
future release.
* Updated nvidia-installer to recognize partial libglvnd
installations which are missing only optional libraries. This
allows the installer to continue installation by default when
libglvnd is installed without libOpenGL.so, as is frequently the
case with distribution-provided libglvnd installations.
* Improved performance of the following Vulkan APIs:
vkAllocateMemory()
vkBindBufferMemory()
vkBindImageMemory()
* Fixed a bug that caused the NV_CTRL_STEREO_SWAP_MODE setting
for quad-buffered stereo visuals to not be preserved across
modesets or VT switches.
* Added a new global X configuration option "AllowExternalGpus",
which defaults to disabled, but can be enabled to allow eGPUs and
other surprise-removable GPUs to be configured with X screens.
* Added support for X.Org xserver ABI 24 (xorg-server 1.20).
* Improved nvidia-bug-report.sh to check for kern.log which is the
default kernel log-file location for many Debian-based Linux
distributions.
* Fixed a bug which could cause X servers that export a Video
Driver ABI earlier than 0.8 to crash when running X11
applications which call XRenderAddTraps().

------------------------------------------------------------------
Sun 6 May 13:40:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 396.18

* Added support for the following GPUs:
Quadro GV100
Quadro P3200
Quadro P4200
* Updated the SLI Mosaic configuration page in nvidia-settings
to make more layout configurations available, including
configurations that do not utilize all of the available displays.
* Added reporting of EGL information to nvidia-settings.
* Added support for a new Vulkan SPIR-V compiler which reduces
shader compilation time and shader system memory consumption.
* A new environment variable can be used to enable (1) (default)
or disable (0) the new compiler if errors in existing
applications are found:

__GL_NextGenCompiler=

The following application profile setting with the same
definition is also available:

{ "pattern" : [], "profile" : [ "NextGenCompiler", ] }

The old compiler is deprecated and will be removed in a
future release.

* Updated nvidia-installer to recognize partial libglvnd
installations which are missing only optional libraries. This
allows the installer to continue installation by default when
libglvnd is installed without libOpenGL.so, as is frequently the
case with distribution-provided libglvnd installations.
* Improved performance of the following Vulkan APIs:
*vkAllocateMemory()
*vkBindBufferMemory()
*vkBindImageMemory()
* Fixed a bug that caused the NV_CTRL_STEREO_SWAP_MODE setting
for quad-buffered stereo visuals to not be preserved across
modesets or VT switches.
* Added a new global X configuration option "AllowExternalGpus",
which defaults to disabled, but can be enabled to allow eGPUs
and other surprise-removable GPUs to be configured with X screens.

------------------------------------------------------------------
Wed 4 Apr 15:52:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 390.48

* Added support for the following GPUs:
Quadro GV100
* Updated the driver to prevent G-SYNC from being enabled when
a Quadro Sync board is installed. G-SYNC and Quadro Sync were
always mutually incompatible features, and this change makes it
easier to use G-SYNC capable monitors on Quadro Sync configurations,
as it is now no longer necessary to manually disable G-SYNC.
* Further improved the fix for occasional flicker when using the
X driver's composition pipeline. This was mostly fixed in 390.42,
but now the fix should be more complete.
* Improved compatibility with recent Linux kernels.
* Fixed a string concatenation bug that caused libGL to accidentally
try to create the directory "$HOME.nv" rather than "$HOME/.nv" in
some cases where /tmp isn't accessible.
* Increased the version numbers of the GLVND libGL, libGLESv1_CM,
libGLESv2, and libEGL libraries, to prevent concurrently installed
non-GLVND libraries from taking precedence in the dynamic
linker cache.
* Fixed a bug which could cause X servers that export
a Video Driver ABI earlier than 0.8 to crash when running X11
applications which call XRenderAddTraps().

------------------------------------------------------------------
Wed 4 Apr 15:39:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 390.42

* Added support for the following GPUs:
Quadro GV100
* Fixed a regression, introduced in 390.12, that caused occasional
flicker when using the X driver's composition pipeline, for
example when using screen transformations like rotation, or the
"ForceCompositionPipeline" or
"ForceFullCompositionPipeline" options."

------------------------------------------------------------------
Mon 12 Feb 13:09:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 390.25

* Added support for the following GPUs:
GeForce GTX 1060 5GB
Quadro P620
* Fixed a regression introduced in 390.12 that prevented displays
from working normally when running multiple X screens with
emulated overlays.
* Fixed a regression introduced in 390.12 that caused occasional
hangs and hard lockup messages in the system log when screen
transformations are in use.
* Added new application profile settings, "EGLVisibleDGPUDevices"
and "EGLVisibleTegraDevices", to control which discrete and
Tegra GPU devices, respectively, may be enumerated by EGL.
See the "Application Profiles" appendix of the driver README
for more details.
* Corrected the SONAME of the copy of the libnvidia-egl-wayland
library included in the .run installer package to
libnvidia-egl-wayland.so.1. The SONAME had previously been
versioned incorrectly with the full version number of the
library.
* Updated nvidia.ko to veto the ACPI_VIDEO_NOTIFY_PROBE event
on kernels that allow the handler for this event to be
overridden, to improve interaction between the NVIDIA driver
and acpi_video on display hotplug events.
* Updated the SLI Mosaic layout page in the nvidia-settings
control panel to support topologies with up to 32 displays.
* Fixed a bug that prevented Xinerama Info from being handled
properly in SLI or Base Mosaic layouts with more than
24 displays.
* Updated the X driver's composition pipeline (used for
rotation, warp and blend, transformation matrices, etc) to
also support stereo.
* Added an OpenGL stereo preview feature to the screen page in
nvidia-settings.
* Fixed a bug where GetTexSubImage() would read incorrect data
into a pixel buffer object when supplied with a target of
GL_TEXTURE_1D_ARRAY and a non-zero yoffset value.
* Added support for generic active stereo with in-band
DisplayPort signaling. The X configuration option
"InbandStereoSignaling" is deprecated in favor of this stereo
mode. See "Appendix B. X Config Options" in the README for
more information.
* Modified the driver to avoid restoring framebuffer console
modes on virtual reality head-mounted displays.
* Fixed a bug which could cause X servers that export a Video
Driver ABI earlier than 0.8 to crash when running X11
applications which call XRenderAddTraps().

------------------------------------------------------------------
Fri 5 Jan 22:43:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 390.12

* Added support for the following GPUs:
TITAN Xp COLLECTORS EDITION
GeForce GTX 1070 Ti
* Added new application profile settings, "EGLVisibleDGPUDevices"
and "EGLVisibleTegraDevices", to control which discrete and
Tegra GPU devices, respectively, may be enumerated by EGL. See
the "Application Profiles" appendix of the driver README for
more details.
* Corrected the SONAME of the copy of the libnvidia-egl-wayland
library included in the .run installer package to
libnvidia-egl-wayland.so.1. The SONAME had previously been
versioned incorrectly with the full version number of the library.
* Updated nvidia.ko to veto the ACPI_VIDEO_NOTIFY_PROBE event on
kernels that allow the handler for this event to be overridden,
to improve interaction between the NVIDIA driver and acpi_video
on display hotplug events.
* Updated the SLI Mosaic layout page in the nvidia-settings control
panel to support topologies with up to 32 displays.
* Fixed a bug that prevented Xinerama Info from being handled
properly in SLI or Base Mosaic layouts with more than 24 displays.
* Updated the X driver's composition pipeline (used for rotation,
warp and blend, transformation matrices, etc) to also support
stereo.
* Added an OpenGL stereo preview feature to the screen page in
nvidia-settings.
* Fixed a bug where GetTexSubImage() would read incorrect data
into a pixel buffer object when supplied with a target of
GL_TEXTURE_1D_ARRAY and a non-zero yoffset value.
* Added support for generic active stereo with in-band
DisplayPort signaling. The X configuration option
"InbandStereoSignaling" is deprecated in favor of this
stereo mode. See "Appendix B. X Config Options" in the README
for more information.
* Modified the driver to avoid restoring framebuffer console
modes on virtual reality head-mounted displays.
* Fixed a bug that could cause a system crash when using the new
NVreg_EnableBacklightHandler kernel module parameter on GPUs
with no displays connected.

------------------------------------------------------------------
Fri 8 Dec 10:50:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 387.34

* Added support for the following GPU:
TITAN V
* Fixed a bug that caused Vulkan X11 swapchains to fail on
GPUs without a display engine, such as some Tesla-branded
graphics cards and some Optimus laptops.
* Fixed a bug that caused fullscreen Vulkan applications to
hang on some Kepler GPUs, such as the GeForce GTX 680.
* Fixed a bug where the G-SYNC indicator was reporting "normal"
instead of "G-SYNC" on Vulkan applications when G-SYNC was
enabled.

------------------------------------------------------------------
Fri 8 Dec 10:41:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 384.98

* Fixed a bug that could cause some eDP G-SYNC displays to
flicker at low refresh rates.
* Fixed a bug that could cause OpenGL applications to crash
after a prolonged DPMS sleep state on a monitor driven with
PRIME Sync.
* Fixed a bug that artificially limited the maximum pixel
clock to 300 MHz when using certain more capable DisplayPort
to HDMI adapters.
* Fixed a bug that prevented the NVIDIA kernel modules from
building for non-SMP Linux kernels.
* Updated the output of `nvidia-smi nvlink --status` to include
reporting NVLink speed.
* Fixed a bug that caused incorrect PCI topology reporting in
nvidia-smi on Intel Skylake systems.

------------------------------------------------------------------
Tue 10 Sep 14:57:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 384.90

* Added support for the following GPU:
Quadro P5200
* Fixed a regression that caused display flickering at lower
PowerMizer performance levels on some GPUs.
* Fixed a regression that prevented console restoration after
a VT switch on some GPUs.
* Fixed a bug that could cause a system hang when resuming from
suspend with some GPUs.
* Fixed a bug that caused slow or stuttering frame rates in
applications that use GLX_EXT_swap_control_tear while
G-SYNC is active.
* Fixed a bug in the NVIDIA VDPAU driver that caused
VdpVideoSurfaceGetBitsYCbCr() of H.265/HEVC content to have
interlaced artifacts.
* Fixed a bug that caused the X driver to not correctly report
the "BlendOrder" MetaMode token when querying the MetaMode
through, e.g., `nvidia-settings --query CurrentMetaMode`.
* Fixed a bug that prevented nvidia-installer from displaying
a targeted error message when optional kernel modules fail
to load.
* Updated nvidia-installer to label kernel modules with SELinux
file type 'modules_object_t'. Some system SELinux policies only
permit loading of kernel modules with this SELinux file type.
* Removed support for checking for and downloading updated driver
packages and precompiled kernel interfaces from
nvidia-installer. This functionality was limited to unencrypted
ftp and http, and was implemented using code that is no longer
actively maintained.

------------------------------------------------------------------
Wed 6 Sep 09:55:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 384.69

* Added support for the following GPU:

Quadro P4000 with Max-Q Design

* Fixed an intermittent hang when using Vulkan to present
directly to display with the VK_KHR_display extension.
SteamVR was particularly affected by that hang.
* Disabled G-SYNC in desktop environments, such as Budgie,
that use libmutter-0.so.

An existing rule to disable G-SYNC for libmutter.so no longer
applied after the library was renamed to libmutter-0.so.
* Updated nvidia-installer to label kernel modules with SELinux
file type 'modules_object_t'. Some system SELinux policies only
permit loading of kernel modules with this SELinux file type.
* Removed support for checking for and downloading updated driver
packages and precompiled kernel interfaces from
nvidia-installer. This functionality was limited to
unencrypted ftp and http, and was implemented using code
that is no longer actively maintained.

------------------------------------------------------------------
Thu 10 Aug 13:58:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 384.59

* Added support for the following GPUs:
GeForce GT 1030
GeForce MX150
* Fixed a bug that prevented changes to stereo eye assignment
from getting applied from the nvidia-settings control panel.
* Fixed a bug that caused S4 suspend (also known as "hibernate")
to hang during suspend when SLI was enabled.
* Fixed a bug where devices would not be properly enumerated
by the Vulkan driver. See the "Known Issues" section of
the README for more details.
* Fixed a bug that could cause OpenGL applications to crash
after calling glDeleteBuffers on VBOs that have been
remapped with ARB_vertex_attrib_binding.
* Fixed a bug that could sometimes cause OpenGL applications
to lock up until the X server receives input.
* Fixed a bug that caused nvidia-settings to drop device BusID
values when making changes to an existing X configuration file.
* Fixed a regression that prevented nvidia-xconfig from
querying some GPUs, e.g. when running `nvidia-xconfig -a`.
* Fixed a bug that caused VDPAU playback to be corrupted when
extended to coordinates beyond 16384 pixels.
* Updated nvidia-persistenced to initialize nvidia-modeset.ko in
addition to nvidia.ko when setting persistence mode.
* Restored several sanity checks that were inadvertently removed
from the kernel module build process in the 355.06 driver.
* Added support for a "Nearest" transform filter in the X driver.
This causes the X driver to use nearest neighbor filtering when
performing screen transformations. The filter can be requested
through the 'filter' argument to RandR's RRSetCrtcTransform, or
through the 'ResamplingMethod' MetaMode token.
* Fixed a bug where nvidia-installer would install a wrong
version of the Vulkan ICD configuration file when GLVND is
disabled for the GLX client.
* Fix a bug with GLX_EXT_buffer_age where incorrect buffer age
values would be reported for SLI AFR configurations. In such
configurations buffer age may now be greater than 3,
the previous maximum buffer age.
* Fixed a bug that could cause hanging and Xids when performing
RandR transforms with Overlay and SLI enabled.
* Extended the information reported by the NVIDIA Xinerama
X extension to report PRIME displays in addition to
directly-connected displays.
* Fixed a bug that caused HDMI audio devices to appear or
disappear inconsistently when HDMI devices were hotplugged or
unplugged.
* Fixed a bug that could cause driver errors when setting modes
on X screens running at Depth 8 or Depth 15.
* Fixed a bug that could cause intermittent kernel panics when
running with PRIME Sync.
* Fixed a bug that caused a kernel panic when hotplugging HDMI
displays on some Zotac mini PCs.
* Updated nvidia-installer to label kernel modules with SELinux
file type 'modules_object_t'. Some system SELinux policies only
permit loading of kernel modules with this SELinux file type.
* Removed support for checking for and downloading updated
driver packages and precompiled kernel interfaces from
nvidia-installer. This functionality was limited to unencrypted
ftp and http, and was implemented using code that is no longer
actively maintained.

------------------------------------------------------------------
Tue 4 Jul 20:11:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 384.47

* Added support for the following GPUs:
GeForce GT 1030
GeForce MX150
* Fixed a bug that could cause OpenGL applications to crash after
calling glDeleteBuffers on VBOs that have been remapped with
ARB_vertex_attrib_binding.
* Fixed a bug that could sometimes cause OpenGL applications to
lock up until the X server receives input.
* Fixed a bug that caused nvidia-settings to drop device BusID
values when making changes to an existing X configuration file.
* Fixed a regression that prevented nvidia-xconfig from querying
some GPUs, e.g. when running `nvidia-xconfig -a`.
* Fixed a bug that caused VDPAU playback to be corrupted when
extended to coordinates beyond 16384 pixels.
* Updated nvidia-persistenced to initialize nvidia-modeset.ko in
addition to nvidia.ko when setting persistence mode.
* Restored several sanity checks that were inadvertently removed
from the kernel module build process in the 355.06 driver.
* Added support for a "Nearest" transform filter in the X driver.
This causes the X driver to use nearest neighbor filtering when
performing screen transformations. The filter can be requested
through the 'filter' argument to RandR's RRSetCrtcTransform, or
through the 'ResamplingMethod' MetaMode token.
* Fixed a bug where nvidia-installer would install a wrong
version of the Vulkan ICD configuration file when GLVND is
disabled for the GLX client.
* Fixed a bug that could cause driver errors when setting modes
on X screens running at Depth 8 or Depth 15.
* Fixed a bug that could cause intermittent kernel panics when
running with PRIME Sync.
* Fixed a bug that caused a kernel panic when hotplugging HDMI
displays on some Zotac mini PCs.
* Updated nvidia-installer to label kernel modules with SELinux
file type 'modules_object_t'. Some system SELinux policies only
permit loading of kernel modules with this SELinux file type.
* Removed support for checking for and downloading updated driver
packages and precompiled kernel interfaces from
nvidia-installer. This functionality was limited to unencrypted
ftp and http, and was implemented using code that is no longer
actively maintained.

------------------------------------------------------------------
Sat 10 Jun 19:47:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 381.09

* Added support for GeForce GT 1030
* Fixed a bug that caused the GLX_EXT_buffer_age buffer age
extension to return incorrect values for stereo drawables
when using passive stereo modes 5 through 9.
* Fixed a bug in Vulkan direct to display where DP1.2 monitors
were not being enumerated.
* Improved compatibility with recent kernels.
* Fixed a bug that caused "nvidia-settings --query all" to
print many duplicate entries.
* Fixed a bug that caused applications to crash in some
situations when calling glXMakeCurrent while OpenGL
threaded optimizations were enabled. This frequently
occurred when Steam was attempting to make a video appear
full-screen.
* Fixed a bug that caused VDPAU applications to use the blit
presentation queue when a previous VDPAU application
didn't shut down cleanly.
* Fixed hangs and crashes that could occur when an OpenGL
context is created while the system is out of available
memory.
* Fixed a bug that caused corruption when OpenGL windows
were moved or resized.
* Fixed a bug that caused X screens that use
Option "UseDisplayDevice" "none" to be resized to
640x480 when using "xrandr -s" to change the screen
configuration.
* Fixed a kernel crash that occurred when attempting to
map large user memory allocations into CUDA.
* Disabled OpenGL threaded optimizations by default,
initially enabled in 378.09, due to various reports of
instability.
* Added support for the following Vulkan extensions:
VK_EXT_acquire_xlib_display
VK_EXT_display_control
VK_EXT_display_surface_counter
VK_EXT_direct_mode_display
VK_KHX_external_memory
VK_KHX_external_memory_fd
VK_KHX_external_semaphore
VK_KHX_external_semaphore_fd These extensions
require a Vulkan loader version >= 1.0.42.
* Removed the X driver's logo splash screen and the
corresponding NoLogoand LogoPath xorg.conf options.
* Added the "ResamplingMethod" MetaMode option, adding
support for bicubic resampling methods when scaling screen
transformations are in use. See the README for more details.

------------------------------------------------------------------
Sun 28 Apr 19:42:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 381.09

* Added support for the following GPUs:
GeForce GTX 1080 Ti
Quadro M520
TITAN Xp
Quadro P3000
* Improved compatibility with recent kernels.
* Fixed a bug that caused "nvidia-settings --query all" to print
many duplicate entries.
* Fixed a bug that caused applications to crash in some situations
when calling glXMakeCurrent while OpenGL threaded optimizations
were enabled.

This frequently occurred when Steam was attempting to make
a video appear full-screen.

* Fixed a bug that caused VDPAU applications to use the blit
presentation queue when a previous VDPAU application didn't shut
down cleanly.
* Fixed hangs and crashes that could occur when an OpenGL context
is created while the system is out of available memory.
* Fixed a bug that caused corruption when OpenGL windows were
moved or resized.
* Fixed a bug that caused X screens that use
Option "UseDisplayDevice" "none" to be resized to 640x480 when
using "xrandr -s" to change the screen configuration.
* Fixed a kernel crash that occurred when attempting to map
large user memory allocations into CUDA.
* Disabled OpenGL threaded optimizations by default, initially
enabled in 378.09, due to various reports of instability.
* Added support for the following Vulkan extensions:
VK_EXT_acquire_xlib_display
VK_EXT_display_control
VK_EXT_display_surface_counter
VK_EXT_direct_mode_display
VK_KHX_external_memory
VK_KHX_external_memory_fd
VK_KHX_external_semaphore
VK_KHX_external_semaphore_fdThese extensions require
a Vulkan loader version >= 1.0.42.
* Removed the X driver's logo splash screen and the corresponding
NoLogo and LogoPath xorg.conf options.
* Added the "ResamplingMethod" MetaMode option, adding support
for bicubic resampling methods when scaling screen
transformations are in use.See the README for more details.
* Fixed a bug that left HDMI and DisplayPort audio muted after
a framebuffer console mode was restored. For some displays,
this caused the display to remain blank.
* Fixed a bug that caused audio over DisplayPort to stop
working when the monitor was unplugged and plugged back in or
awoken from DPMS power-saving mode.
* Fixed a regression that caused corruption in certain
applications, such as window border shadows in Unity, after
resuming from suspend.
* Fixed a bug that prevented PRIME Sync from working on
notebooks with GeForce GTX 4xx and 5xx series GPUs.

------------------------------------------------------------------
Sun 22 Jan 11:39:00 CET 2017 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
speedup installation

- Use the legacy GLX library

- Update to 378.09

* Added support for the following GPU(s):

Quadro M1200
Quadro M2200
* Added support for the ARB_parallel_shader_compile extension
to allow multi-threaded compilation of GLSL shaders.
* Updated the X driver to ignore any Virtual Reality Head Mounted
Displays (HMDs). See the "AllowHMD" X configuration option
in the README for details.
* The driver will now advertise GLX FBConfigs with no depth bits
on depth 30 X screens.
* Added support in nvidia-settings to view configured PRIME
displays. To enable PRIME displays, see "Offloading Graphics
Display with RandR 1.4" in the README.
* Added infrastructure which enables the NVIDIA EGL driver
to load EGL external platform libraries that add client-side
support for new window systems, beyond the existing
libnvidia-egl-wayland.so.1. For more details, see:

- https://github.com/NVIDIA/eglexternalplatform
- https://github.com/NVIDIA/egl-wayland
* Added support for the following Vulkan extensions:

VK_KHR_display
VK_KHR_display_swapchain
* Enabled OpenGL threaded optimizations by default in the driver.
Refer to the "Threaded Optimizations" section in the
"Specifying OpenGL Environment Variable Settings" chapter of
the README for details.
These optimizations will self-disable when they are degrading
performance. As a result, performance should be unchanged for
many applications, and increased for those that benefit from
threaded optimizations and were not already forcing them enabled.

------------------------------------------------------------------
Thu 15 Dec 09:41:00 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
speedup installation

- Use the legacy GLX library

- Update to 375.26

* Added support for the following GPU(s):
Quadro M3000 SE
* Fixed a regression that prevented the backlight on some notebook
computer displays from turning back on after being shut off.
* Fixed a regression that prevented the console from being restored
properly when using SLI.
* Fixed a bug that caused installer manifest entries for some 32-bit
compatibility libraries to be duplicated in the installer package.
These entries led nvidia-installer to issue warning messages when
installing the 32-bit compatibility libraries, for example:
'Cannot create symlink /usr/lib/libEGL.so (File exists)'.
* Fixed a regression that could cause the nvidia-settings control
panel to crash on startup with certain GPU configurations.
* Fixed a regression that prevented the GLX_NV_swap_group extension
from working when using SLI or Quadro Sync.
* Fixed a long-standing bug that caused the NVIDIA X driver to not
correctly detect AC/battery hotplug events on notebooks.
* Fixed an interaction problem between the Linux kernel's
CONFIG_HARDENED_USERCOPY feature (new in Linux kernel 4.8) and
nvidia-drm.ko with modeset=1 enabled. This problem caused
CONFIG_HARDENED_USERCOPY to erroneously halt the system,
issuing reports of the form:

usercopy: kernel memory overwrite attempt detected to
ffff8803e8ec7ce0 (<process stack>) (8 bytes)

* Fixed a bug that prevented nvidia-bug-report.sh from finding
relevant messages in kernel log files.
* Added support for the screen_info.ext_lfb_base field, on kernels
that have it, in order to properly handle UEFI framebuffer
consoles with physical addresses above 4GB.

------------------------------------------------------------------
Thu 1 Dec 11:10:00 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
speedup installation

- Use the legacy GLX library

- Update to 375.20

* Added support for the following GPUs:
GeForce GTX 1050
GeForce GTX 1050 Ti
Quadro M620
Quadro M5000 SE
Quadro M3000 SE
* Fixed a bug that could cause displays in SLI Mosaic to blank
when applying a transformation matrix.
* Added EGL support to the GL Vendor Neutral Dispatch Library
(libGLVND). The installer package now includes both GLVND and
non-GLVND versions of the EGL libraries: the --glvnd-egl-client and
--no-glvnd-egl-client options in nvidia-installer can be used to
select which to install.
* Fixed a bug that prevented G-SYNC from working on notebook displays.
* Fixed a bug that caused DisplayPort multistream devices to go blank
after the console is restored.
* Fixed a bug that caused a kernel crash when starting X for the second
time when more than one DisplayPort multistream device is connected to
a single DisplayPort connector via a branch device.
* Updated nvidia-settings to not have a build-time dependence on an
external nvml development package (a regression introduced in 375.10).
* Fixed a crash in nvidia-settings when adding Application Profile Rule
and Profile entries.
* Removed the "Enable Tooltip" option in nvidia-settings for the GTK 2
interface.
* Added new X configuration options:

ForceCompositionPipeline
ForceFullCompositionPipeline

which override the MetaMode tokens with the same names.

* Fixed a bug that caused issues with panning and cursor constraining
when mixing PRIME-driven displays with natively driven displays.
* Fixed a bug that caused long delays when leaving the VT or disabling
a display device while an OpenGL application is running.
* Improved console restore behavior on systems that use the UEFI Graphics
Output Protocol, and most vesafb modes.
* Added support for the RandR TILE property added in RandR 1.5.
* Raised the on-disk OpenGL shader cache size from 64MB to 128MB. Refer
to the "Specifying OpenGL Environment Variable Settings" section of the
driver README for details on how to select its location or disable it.
* Fixed a bug in synchronization primitives shared between X and OpenGL.
* Added support for X.Org xserver ABI 23 (xorg-server 1.19)
* Fixed a bug that allowed nvidia-installer to attempt loading kernel
modules that were built against non-running kernels.

------------------------------------------------------------------
Sat 22 Sep 13:49:00 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
speedup installation

- Use the legacy GLX library

- Update to 375.10

* Added support for the following GPUs:
Quadro P6000
Quadro P5000
GeForce GTX 1050
GeForce GTX 1050 Ti
* Added new X configuration options:
ForceCompositionPipeline
ForceFullCompositionPipelinewhich override the MetaMode
tokens with the same names.
* Fixed a bug that caused issues with panning and cursor constraining
when mixing PRIME-driven displays with natively driven displays.
* Fixed a bug that caused long delays when leaving the VT or
disabling a display device while an OpenGL application is running.
* Improved console restore behavior on systems that use the
UEFI Graphics Output Protocol, and most vesafb modes.
* Added support for the RandR TILE property added in RandR 1.5.
* Fixed a bug that prevented nvidia-bug-report.sh from finding
relevant messages in kernel log files.
* Fixed a bug that allowed nvidia-installer to attempt loading
kernel modules that were built against non-running kernels.

------------------------------------------------------------------
Thu 8 Sep 21:00:00 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
speedup installation

- Use the legacy GLX library

- Update to 370.28

* Fixed undefined symbol references in libnvidia-glcore.so.
* Fixed a potential hang in Vulkan applications such as
vkQuake and DOTA2 that use vkFences for present
synchronization.
* Fixed a bug that caused the driver to not set HDMI
YUV 420 4K modes correctly on some TVs, such as the
VIZIO D40u-D1.
* Updated CurrentMetaMode reporting via the NV-CONTROL API
to reflect whether ForceCompositionPipeline or
ForceFullCompositionPipeline are set in the current MetaMode.
* Added the ability to over- and under-clock certain
GeForce GPUs in the GeForce GTX 1000 series and later.
For GPUs that allow it, an offset can be applied to clock
values in some clock domains of all performance levels.
This clock manipulation is done at the user's own risk.
See the README documentation of the "CoolBits" X configuration
option for more details.
* Implemented initial support for PRIME Synchronization to
synchronize flipping between an NVIDIA PRIME display source
and a separate PRIME display sink. This support is
experimental and currently requires a prerelease X.org X server.
* Fixed a bug that prevented Vulkan applications from
presenting from multiple queues to the same X11 swapchain.
* Added the "PixelShiftMode" MetaMode option, enabling support
for 4K and 8K pixel shift displays. See the README for details.

------------------------------------------------------------------
Sat 20 Aug 19:19:26 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
speedup installation

- Use the legacy GLX library

- Update to 370.23

* Added the ability to over- and under-clock certain
GeForce GPUs in the GeForce GTX 1000 series and later.
For GPUs that allow it, an offset can be applied to clock
values in some clock domains of all performance levels.
This clock manipulation is done at the user's own risk.
See the README documentation of the "CoolBits" X configuration
option for more details.
* Fixed a bug that prevented Vulkan applications from
presenting from multiple queues to the same X11 swapchain.
* Added the "PixelShiftMode" MetaMode option, enabling support
for 4K and 8K pixel shift displays. See the README for details.

------------------------------------------------------------------
Sun 7 Aug 10:00:01 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
speedup installation

- Use the legacy GLX library

- Update to 367.35

* Fixed a regression that could cause console corruption
when resuming from suspend.
* Improved buffer write performance of the nvidia-drm
DRM KMS driver by using write-combined DRM Dumb Buffers
where available.
* Fixed a bug that caused X to crash when applying changes
to the RandR CscMatrix property while VT-switched away from X.
* Fixed a bug that caused a crash when exiting nvidia-settings
on displays with 8 or 15 bit color depths.
* Added support for VDPAU Feature Set H to the NVIDIA VDPAU
driver. GPUs with VDPAU Feature Set H are capable of
hardware-accelerated decoding of 8192x8192 (8k)
H.265/HEVC video streams.
* Fixed a bug that caused the X server to sometimes skip
displaying Vulkan frames when the Composite extension is
enabled.
* Added support for querying clock values on Pascal GPUs.
* Removed the Base Mosaic configuration option from
nvidia-settings on systems where the feature is not
actually supported.
* Fixed a bug that caused nvidia-smi to report an inaccurate
version number.
* Fixed a bug that could lead to a system crash if there was
a peer-to-peer mapping still active during CUDA context
teardown.
* Fixed a bug that prevented nvidia-bug-report.sh from
finding relevant messages in kernel log files.

------------------------------------------------------------------
Tue 14 Jun 13:30:55 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
speedup installation

- Use the legacy GLX library

- Update to 367.27

* Added support for the following GPUs:
GeForce GTX 1080
GeForce GTX 1070
* Added support for VDPAU Feature Set H to the NVIDIA VDPAU
driver. GPUs with VDPAU Feature Set H are capable of
hardware-accelerated decoding of
8192x8192 (8k) H.265/HEVC video streams.
* Fixed a bug that caused the X server to sometimes skip
displaying Vulkan frames when the Composite extension is
enabled.
* Fixed a bug that would cause OpenGL applications to crash
when creating a context on one X display connection, then
making it current with no associated drawable on another
X display connection. This fixes a crash when starting
some versions of Matlab.
* Fixed OpenGL presentation to SDI through
the GLX_NV_video_out and GLX_NV_present_video extensions,
which was broken by the introduction of the nvidia-modeset
kernel module in 358.09.
* Fixed a bug that caused an incorrect offset to be applied
when using the full composition pipeline on a display whose
image has both a rotation and a ViewportOut offset applied.
* Fixed a bug that could cause nvidia-settings to crash on some
systems when responding to events such as hotplugging
DisplayPort devices.
* Fixed a bug that could cause crashes in OpenGL applications
which use glTextureView() with a non-zero minlevel.
* Enhanced the Display Device information page in nvidia-settings
with additional information for DisplayPort devices to reflect
attributes which are specific to DisplayPort connections.
* Fixed a bug which could cause deleted application profiles to
appear when editing rules in the nvidia-settings control panel.
* Fixed a bug that caused hangs when a G-SYNC monitor is unplugged
and a non-G-SYNC monitor is connected while G-SYNC is active.
* Fixed a bug that caused "nvidia-modeset: ERROR: GPU:0: Activating
G-SYNC failed" to be printed to the system log if a G-SYNC monitor
is connected and stereo is enabled in xorg.conf on a configuration
that doesn't support it.
* Added the NV_robustness_video_memory_purge OpenGL extension, which
allows applications to know when a mode switching or power event
purged the contents of FBOs and BOs residing in video memory.
* Fixed a bug that prevented HDMI 2.0 4K monitors from waking up
from sleep or hot-replug.
* Fixed a bug that could lead to a system crash if there was
a peer-to-peer mapping still active during CUDA context teardown.

------------------------------------------------------------------
Tue 14 Jun 13:20:22 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
speedup installation

------------------------------------------------------------------
Fri 27 Apr 23:31:29 CET 2016 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 367.18

* Added support for the following GPUs:
GeForce GTX 1080
* Fixed a bug that would cause OpenGL applications to crash when
creating a context on one X display connection, then making it
current with no associated drawable on another X display
connection. This fixes a crash when starting some versions of
Matlab.
* Fixed OpenGL presentation to SDI through the GLX_NV_video_out
and GLX_NV_present_video extensions, which was broken by the
introduction of the nvidia-modeset kernel module in 358.09.
* Fixed a bug that caused an incorrect offset to be applied when
using the full composition pipeline on a display whose image has
both a rotation and a ViewportOut offset applied.
* Fixed a bug that could cause nvidia-settings to crash on some
systems when responding to events such as hotplugging
DisplayPort devices.
* Fixed a bug that could cause crashes in OpenGL applications
which use glTextureView() with a non-zero minlevel.
* Enhanced the Display Device information page in nvidia-settings
with additional information for DisplayPort devices to reflect
attributes which are specific to DisplayPort connections.
* Fixed a bug which could cause deleted application profiles to
appear when editing rules in the nvidia-settings control panel.
* Fixed a bug that caused hangs when a G-SYNC monitor is unplugged
and a non-G-SYNC monitor is connected while G-SYNC is active.
* Fixed a bug that caused "nvidia-modeset: ERROR: GPU:0: Activating
G-SYNC failed" to be printed to the system log if a G-SYNC monitor
is connected and stereo is enabled in xorg.conf on a configuration
that doesn't support it.
* Added the NV_robustness_video_memory_purge OpenGL extension, which
allows applications to know when a mode switching or power event
purged the contents of FBOs and BOs residing in video memory.
* Fixed a bug that prevented HDMI 2.0 4K monitors from waking up
from sleep or hot-replug.
* Fixed a bug that sometimes prevented flipping from being enabled
on systems with multiple displays.
* Fixed a bug that could cause applications to crash when using
the EGL_EXT_platform_device extension on a system with
multiple GPUs.
* Fixed a bug that could cause nvidia-installer's runtime loader
test to fail spuriously on some systems.
* The NVIDIA Unified Virtual Memory kernel module, nvidia-uvm.ko,
now has a minimum kernel requirement of Linux 2.6.32. On older
kernel versions, nvidia-uvm.ko will be compiled as a stub kernel
module which does not provide any functionality.
* Updated the libglvnd snapshot included in the NVIDIA driver
package to libglvnd commit b7d75429677eecc00c3701aaa4deac1304bc51ff.
This contains a new revision of the libglvnd ABI. The driver is
not compatible with a libglvnd older than commit
c5bcda3b848fe52d6ae6ef25c917431c06d62d27.

------------------------------------------------------------------
Wed 27 Apr 19:59:37 CET 2016 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 364.19

* Added support for the following GPUs:
Quadro M6000 24GB
Quadro M5500
* Fixed some locking issues in libnvidia-egl-wayland.so.
* Fixed several libnvidia-egl-wayland.so interaction problems with
buffer management Wayland protocols.
* Fixed several EGL driver interaction problems with resizing
windows in Wayland.
* Fixed a bug that caused some DRM PRIME configurations to fail
when DRM KMS was enabled (i.e., nvidia-drm.ko's modeset kernel
module parameter was set to "1").
* Fixed a bug that could cause a kernel crash when VDPAU was used
while DRM KMS was enabled.
* Changed the default OpenGL installation type to use the
GLVND GLX client libraries rather than the legacy non-GLVND
libraries.
* Added initial support for Direct Rendering Manager Kernel
Modesetting (DRM KMS).See the DRM KMS section of the README
for details.
* Added a new kernel module, nvidia-drm.ko, which registers as
a DRM driver with both PRIME and DRM KMS support.
* Added support for the following EGL extensions:

EGL_EXT_platform_wayland

to enable Wayland applications to run on NVIDIA's EGL
implementation,

EGL_WL_bind_wayland_display

to enable Wayland compositors to run on NVIDIA's EGL
implementation, and

EGL_EXT_device_drm
EGL_EXT_output_drm
EGL_EXT_stream_consumer_egloutput

to enable Mir and Wayland compositors to display their content
through EGLDevice, EGLOutput, and EGLstreams.

* Added a Wayland platform library, libnvidia-egl-wayland.so, to
allow Wayland compositors that support EGLDevice, EGLOutput, and
EGLstreams to share EGL buffers with Wayland applications.
* Fixed a bug that could cause incorrect frame rate reporting on
Quadro Sync configurations with multiple GPUs.
* Added support for the Vulkan API version 1.0.
* Improved X colormap precision from 8 significant bits to 11 on
GeForce GPUs.Quadro GPUs already used 11 bits of precision.
* Added a new RandR property, CscMatrix, which specifies
a 3x4 color-space conversion matrix.The matrix is applied after
the X colormap and before the gamma ramp.This property is
available on GF119 and newer GPUs.
* Improved handling of the X gamma ramp on GF119 and newer
GPUs.On these GPUs, the RandR gamma ramp is always 1024 entries
and now applies to the cursor and VDPAU or workstation overlays
in addition to the X root window.
* Reworked how the NVIDIA driver registers with the Linux kernel's
DRM subsystem for PRIME support.As a result, PRIME support
requires Linux kernel version 3.13 or newer (previously, PRIME
support required Linux kernel version 3.10 or newer).
* Improved the interactivity of applications that use a hardware
cursor while G-SYNC is active.

------------------------------------------------------------------
Wed 6 Mar 23:27:05 CET 2016 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 364.15

* Added support for the following GPUs:
Quadro M6000 24GB
* Fixed several EGL driver interaction problems with resizing
windows in Wayland.
* Fixed a bug that caused some DRM PRIME configurations to fail when
DRM KMS was enabled (i.e., nvidia-drm.ko's modeset kernel module
parameter was set to "1").
* Fixed a bug that could cause a kernel crash when VDPAU was used
while DRM KMS was enabled.
* Updated the libglvnd snapshot included in the NVIDIA driver package
to libglvnd commit b7d75429677eecc00c3701aaa4deac1304bc51ff. This
contains a new revision of the libglvnd ABI. The driver is not
compatible with a libglvnd older than
commit c5bcda3b848fe52d6ae6ef25c917431c06d62d27.
* Limited the default concurrency level in nvidia-settings to 32,
to avoid hitting the maximum tasks limit on systems with many CPUs.

------------------------------------------------------------------
Wed 6 Mar 16:40:29 CET 2016 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 364.12

* Added support for the following GPUs:
GeForce 920MX
GeForce 930MX
* Fixed a regression that caused GPU exceptions and incorrect
rendering when using pbuffers with EGLDevice.
* Fixed a bug that caused nvidia-settings to crash when pairing
glasses with the 3D Vision Pro transmitter on some systems.
* Fixed a bug that caused installer manifest entries for some
32-bit compatibility libraries to be duplicated in the installer
package.
* Fixed a regression that caused the HSync and VSync mode timing
polarity flags to be inverted.
* Changed the default OpenGL installation type to use the
GLVND GLX client libraries rather than the legacy non-GLVND
libraries.
* Added initial support for Direct Rendering Manager Kernel
Modesetting (DRM KMS). See the DRM KMS section of the
README for details.
* Added a new kernel module, nvidia-drm.ko, which registers as
a DRM driver with both PRIME and DRM KMS support.
* Added support for the following EGL extensions:

EGL_EXT_platform_wayland

to enable Wayland applications to run on NVIDIA's EGL
implementation,

EGL_WL_bind_wayland_display

to enable Wayland compositors to run on NVIDIA's EGL
implementation, and

EGL_EXT_device_drm
EGL_EXT_output_drm
EGL_EXT_stream_consumer_egloutput

to enable Mir and Wayland compositors to display their content
through EGLDevice, EGLOutput, and EGLstreams.
* Added a Wayland platform library, libnvidia-egl-wayland.so, to
allow Wayland compositors that support EGLDevice, EGLOutput, and
EGLstreams to share EGL buffers with Wayland applications.
* Fixed a bug that could cause incorrect frame rate reporting on
Quadro Sync configurations with multiple GPUs.
* Added support for the Vulkan API version 1.0.
* Improved X colormap precision from 8 significant bits to 11 on
GeForce GPUs. Quadro GPUs already used 11 bits of precision.
* Added a new RandR property, CscMatrix, which specifies a 3x4
color-space conversion matrix. The matrix is applied after
the X colormap and before the gamma ramp. This property is
available on GF119 and newer GPUs.
* Improved handling of the X gamma ramp on GF119 and newer GPUs.
On these GPUs, the RandR gamma ramp is always 1024 entries and
now applies to the cursor and VDPAU or workstation overlays in
addition to the X root window
* Reworked how the NVIDIA driver registers with the Linux kernel's
DRM subsystem for PRIME support. As a result, PRIME support
requires Linux kernel version 3.13 or newer (previously, PRIME
support required Linux kernel version 3.10 or newer).
* Improved the interactivity of applications that use a hardware
cursor while G-SYNC is active.

------------------------------------------------------------------
Wed 6 Mar 15:54:53 CET 2016 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 361.42

* Added support for the following GPUs:
GeForce 920MX
GeForce 930MX
Quadro M6000 24GB
* Limited the default concurrency level in nvidia-settings
to 32, to avoid hitting the maximum tasks limit on systems
with many CPUs.
* Fixed a regression that caused GPU exceptions and incorrect
rendering when using pbuffers with EGLDevice.
* Fixed a bug that caused nvidia-settings to crash when pairing
glasses with the 3D Vision Pro transmitter on some systems.
* Fixed a bug that caused installer manifest entries for some
32-bit compatibility libraries to be duplicated in the installer
package.
* Fixed a regression that caused the HSync and VSync mode timing
polarity flags to be inverted.

------------------------------------------------------------------
Thu 11 Feb 20:22:09 CET 2016 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 361.28

* Added support for the following GPU:
GeForce 945A
* Added a legacy, non-GLVND libGL.so GLX client library to the
NVIDIA Linux driver installer package, and the ability to
select between a GLVND or non-GLVND GLX client library at
installation time. This allows users to install the legacy
non-GLVND GLX client library in order to work around
compatibility issues which may arise due to GLX applications
which depend upon behaviors of the NVIDIA GLX client driver
which are not defined by the Linux OpenGL ABI version 1.0.

By default, nvidia-installer will install the legacy,
non-GLVND GLX client libraries. The --glvnd-glx-client
command line option can be used to override the default,
and install the GLVND GLX client libraries instead.
Please contact the vendors of any applications that are not
compatible with GLVND to ensure that their applications be
updated for compatibility with GLVND.

The presence of multiple GLX client libraries in the
package has implications for repackagers of the NVIDIA
driver; see the libGL.so entry in the "Installed Components"
chapter of the README for details.

The OpenGL Vendor-Neutral Driver (GLVND) infrastructure
is now included and supported by the NVIDIA GLX and OpenGL
drivers. This should not cause any visible changes in
behavior for end users, but some internal driver component
libraries have been renamed and/or moved as a result.
These changes may affect scripts that rely on the presence
of NVIDIA OpenGL driver components other than those specified
in the Linux OpenGL ABI version 1.0, maintainers of
alternative NVIDIA driver installation packages, and
applications which rely on the presence of any
non- OpenGL/GLX symbols in the libGL.so.1 library and
its dependencies in any way.

Please see:

https://github.com/NVIDIA/libglvnd

For more information on the GLVND project.

The Linux OpenGL ABI version 1.0 specification is available at:

https://www.opengl.org/registry/ABI

* Updated nvidia-installer to run ldconfig(8) and depmod(8)
after uninstalling an existing driver, instead of only
running these two commands when installing a new driver.
* Removed the VDPAU wrapper and trace libraries
libvdpau.so.1 and libvdpau_trace.so.1 from the driver package.
These libraries may be available via your distribution's package
management system, or can be compiled from the sources
available at:

http://people.freedesktop.org/~aplattner/vdpau/

* Please see

http://freedesktop.org/wiki/Software/VDPAU/

for more information.

* Fixed a bug in the EGL driver where a mutex was unlocked more
than once. This triggers undefined behavior, and in particular,
if lock elision is enabled in glibc, may result in a segmentation
fault.

------------------------------------------------------------------
Mon 8 Feb 12:18:16 CET 2016 - bumblebee.obs@gmail.com

- Update to 361.18

* Added support for the following GPUs:
GeForce 940MX
Quadro M500M
* Fixed a bug in the EGL driver where a mutex was unlocked
more than once. This triggers undefined behavior, and in
particular, if lock elision is enabled in glibc, may
result in a segmentation fault.
* The OpenGL Vendor-Neutral Driver (GLVND) infrastructure
is now included and supported by the NVIDIA GLX and OpenGL
drivers. This should not cause any visible changes in
behavior for end users, but some internal driver component
libraries have been renamed and/or moved as a result.
These changes may affect scripts that rely on the presence
of NVIDIA OpenGL driver components other than those specified
in the Linux OpenGL ABI version 1.0, maintainers of
alternative NVIDIA driver installation packages, and
applications which rely on the presence of any
non- OpenGL/GLX symbols in the libGL.so.1 library and
its dependencies in any way.

Please see:
https://github.com/NVIDIA/libglvnd

For more information on the GLVND project.

The Linux OpenGL ABI version 1.0 specification is available at:
https://www.opengl.org/registry/ABI

* Updated nvidia-installer to run ldconfig(8) and depmod(8)
after uninstalling an existing driver, instead of only running
these two commands when installing a new driver.
* Removed the VDPAU wrapper and trace libraries libvdpau.so.1 and
libvdpau_trace.so.1 from the driver package. These libraries
may be available via your distribution's package management
system, or can be compiled from the sources available at:

http://people.freedesktop.org/~aplattner/vdpau/

Please see

http://freedesktop.org/wiki/Software/VDPAU/ for more information.

------------------------------------------------------------------
Sat 9 Jan 19:16:14 CET 2016 - bumblebee.obs@gmail.com

- Update to 361.16

* The OpenGL Vendor-Neutral Driver (GLVND) infrastructure is
now included and supported by the NVIDIA GLX and OpenGL drivers.
This should not cause any visible changes in behavior for
end users, but some internal driver component libraries have
been renamed and/or moved as a result. These changes may affect
scripts that rely on the presence of NVIDIA OpenGL driver
components other than those specified in the Linux OpenGL ABI
version 1.0, maintainers of alternative NVIDIA driver
installation packages, and applications which rely on the
presence of any non- OpenGL/GLX symbols in the libGL.so.1
library and its dependencies in any way.

Please see:
https://github.com/NVIDIA/libglvnd

For more information on the GLVND project.

The Linux OpenGL ABI version 1.0 specification is available at:
https://www.opengl.org/registry/ABI

* Updated nvidia-installer to run ldconfig(8) and depmod(8) after
uninstalling an existing driver, instead of only running these
two commands when installing a new driver.
* Removed the VDPAU wrapper and trace libraries libvdpau.so.1 and
libvdpau_trace.so.1 from the driver package. These libraries may
be available via your distribution's package management system,
or can be compiled from the sources available at:

http://people.freedesktop.org/~aplattner/vdpau/

Please see

http://freedesktop.org/wiki/Software/VDPAU/ for more information.

-------------------------------------------------------------------
Tue Dec 01 13:37:45 CEST 2015 - bumblebee.obs@gmail.com

- Update to 358.16

* Fixed a regression, introduced in 358.09, that caused
incorrect rendering of OpenGL stereo applications in
combination with Quadro Sync on certain GPUs.
* Fixed a regression, introduced in 358.09, that caused
OpenGL stereo applications to hang when SLI AFR, SFR,
or SLIAA modes were enabled.
* Fixed a regression, introduced in 358.09, that caused
the system to hang while launching OpenGL applications
when some SLI Mosaic topologies were in use.
* Fixed a bug that could cause some G-SYNC monitors to
flicker on Kepler-based GPUs when running at low frame
rates.
* Fixed a regression that could cause OpenGL or VDPAU
applications to hang in Xinerama layouts which include
multiple X screens that are driven by the same GPU.
* Added a fallback to allow GLX to function when UNIX domain
socket communication is blocked between NVIDIA client-side
GLX and NVIDIA server-side GLX. For example, the default
SELinux policy on Fedora 22 prevents the NVIDIA 358.09 GLX
driver from working in GDM3:

https://bugzilla.redhat.com/show_bug.cgi?id=1271401

* Fixed a bug that could cause nvidia-installer to crash when
installing from a driver package that has had precompiled
kernel interfaces added to it (e.g., by using the
"--add-this-kernel" option).
* Fixed a regression from 358.09 that caused G-SYNC monitors
configured to use 3D Vision stereo to go blank and report
an unsupported signal.
* Fixed a regression from 358.09 that caused OpenGL
applications that failed to negotiate permission to perform
glXSwapBuffers via flipping to stop updating the screen.
This was triggered on Fedora 22 where the SELinux system policy
prevents gnome-shell from communicating with the X server.

Now, OpenGL applications that fail to negotiate flipping
will fall back to glXSwapBuffers via blitting.

See https://bugzilla.redhat.com/show_bug.cgi?id=1271401
for more details.

nvidia-modeset.ko does not provide any new user-visible
functionality or interfaces to third party applications.
However, in a later release, nvidia-modeset.ko will be used as
a basis for the modesetting interface provided by the kernel's
direct rendering manager (DRM).

* Reduced flickering and delays when transitioning into or out
of G-SYNC mode. As part of this change, monitors that have G-SYNC
indicators in their on-screen displays will now always report
that they are in G-SYNC mode. The OpenGL G-SYNC visual indicator
can be enabled in nvidia-settings to determine when G-SYNC is
actually being used.
* GLX protocol for the following OpenGL extension from OpenGL 3.0 has
been promoted from unofficial to ARB approved official status:

GL_EXT_draw_buffers2

GLX protocol for the following OpenGL 3.0 commands:

BindBufferRangeNV
BindBufferBaseNV
BeginTransformFeedbackNV
EndTransformFeedbackNV
GetTransformFeedbackVaryingEXT
TransformFeedbackVaryingsEXT
which are part of the following extensions:

GL_NV_transform_feedback
GL_EXT_transform_feedback

has been promoted from unofficial to ARB approved official status.

With the above changes, GLX protocol for OpenGL 3.0 has been
promoted from unofficial to ARB approved official status.

* Added a new system memory allocation mechanism for large
allocations in the OpenGL driver. This mechanism allows unmapping
the allocation from the process when it is not in use, making more
virtual address space available to the application. It is enabled
by default on 32 bit OpenGL applications with Linux 3.11+ and
glibc 2.19+. Memory allocated this way will consume space in
/dev/shm. Setting the environment variable
__GL_DevShmPageableAllocations to 2 will disable this feature
* Added support for OpenGL 4.3.
* Added support for X.Org xserver ABI 20 (xorg-server 1.18).

-------------------------------------------------------------------
Tue Oct 20 17:01:46 CEST 2015 - bumblebee.obs@gmail.com

- Update to 358.09

* Fixed a regression that reduced OpenGL performance on
headless X server configurations.
* Fixed a memory leak that occurred after destroying a GLXWindow
which still has the current context attached to it.
* Fixed a bug which caused EGL pbuffers to be created with both
a front and back buffer, instead of a back buffer only,
as is required for EGL.
* Added a new kernel module, nvidia-modeset.ko. This new driver
component works in conjunction with the nvidia.ko kernel module
to program the display engine of the GPU.
nvidia-modeset.ko does not provide any new user-visible functionality
or interfaces to third party applications. However, in a later
release, nvidia-modeset.ko will be used as a basis for
the modesetting interface provided by the kernel's direct
rendering manager (DRM).
* Reduced flickering and delays when transitioning into or out of
G-SYNC mode. As part of this change, monitors that have G-SYNC
indicators in their on-screen displays will now always report that
they are in G-SYNC mode. The OpenGL G-SYNC visual indicator can be
enabled in nvidia-settings to determine when G-SYNC is actually
being used.
* GLX protocol for the following OpenGL extension from OpenGL 3.0
has been promoted from unofficial to ARB approved official status:

GL_EXT_draw_buffers2
GLX protocol for the following OpenGL 3.0 commands:

BindBufferRangeNV
BindBufferBaseNV
BeginTransformFeedbackNV
EndTransformFeedbackNV
GetTransformFeedbackVaryingEXT
TransformFeedbackVaryingsEXT

which are part of the following extensions:
GL_NV_transform_feedback
GL_EXT_transform_feedback

has been promoted from unofficial to ARB approved official status.

With the above changes, GLX protocol for OpenGL 3.0 has been promoted
from unofficial to ARB approved official status.
* Added a new system memory allocation mechanism for large allocations
in the OpenGL driver. This mechanism allows unmapping the allocation
from the process when it is not in use, making more virtual address
space available to the application. It is enabled by default on 32 bit
OpenGL applications with Linux 3.11+ and glibc 2.19+. Memory allocated
this way will consume space in /dev/shm. Setting the environment
variable __GL_DevShmPageableAllocations to 2 will disable this feature

-------------------------------------------------------------------
Mon Oct 19 21:18:26 CEST 2015 - bumblebee.obs@gmail.com

- Update to 355.11

* Added support for the following GPUs:
GeForce GTX 950
Quadro M4000
Quadro M5000
* Fixed a bug that caused applications using OpenCL or CUDA with
OpenGL interopability to crash when using GLX indirect rendering.
* Fixed a bug that caused VDPAU to only display the top half of
a video frame when decoding and displaying H.265/HEVC encoded
video streams.
* Fixed a bug that could cause GPU exceptions when using glReadPixels()
on the depth or stencil buffers of multisample windows while
resizing or moving the windows.
* Fixed a bug that could cause data from one texture level to
overwrite data from the next lowest level, when creating a texture
view that did not include the higher of the two levels.
* Fixed a bug that could cause the nvidia-settings control panel to
crash when updating the display layout.
* Corrected some erroneous reporting of support for GLX extensions:
several extensions were being reported as supported for indirect
GLX, which were in fact only supported under direct rendering.
* Added support for the following EGL extensions:
EGL_KHR_swap_buffers_with_damage
EGL_NV_stream_consumer_gltexture_yuv
* Replaced the build system for the NVIDIA kernel modules and updated
the installer package and nvidia-installer to use the new build system
and kernel module source code layout. For more information about
the new build system and layout, see the README document at:

ftp://download.nvidia.com/XFree86/packaging/linux/new-kbuild-for-355/

* Added experimental full OpenGL support to EGL.
* Marked the DeleteUnusedDP12Displays option as deprecated.

* Added support for VDPAU profiles added in VDPAU 0.9:
VDP_DECODER_PROFILE_H264_BASELINE
VDP_DECODER_PROFILE_H264_CONSTRAINED_BASELINE
VDP_DECODER_PROFILE_H264_EXTENDED
VDP_DECODER_PROFILE_H264_PROGRESSIVE_HIGH
VDP_DECODER_PROFILE_H264_CONSTRAINED_HIGH
* Fixed a bug that prevented more than one RandR output from sharing
user-added modes.
* Fixed a bug that caused application-specified swap intervals to be
ignored on some screens when using Xinerama.
* Fixed a bug that caused user-supplied RandR modes with nonsensical
combinations of the +HSync, -HSync, +VSync, and -VSync flags to
corrupt the mode list.
* Added support to make an OpenGL 3.0 and above context current
without making current to any drawable.

-------------------------------------------------------------------
Fri Aug 07 09:51:36 CEST 2015 - bumblebee.obs@gmail.com

- Update to 352.30

* Fixed a bug that could cause data from one texture level to
overwrite data from the next lowest level, when creating a
texture view that did not include the higher of the two levels.
* Fixed a bug that could cause the nvidia-settings control panel to
crash when updating the display layout.
* Corrected some erroneous reporting of support for GLX extensions:
several extensions were being reported as supported for indirect
GLX, which were in fact only supported under direct rendering.
* Added support for the following EGL extensions:
EGL_KHR_swap_buffers_with_damage
EGL_NV_stream_consumer_gltexture_yuv
* Replaced the build system for the NVIDIA kernel modules and
updated the installer package and nvidia-installer to use the new
build system and kernel module source code layout. For more
information about the new build system and layout, see the README
document at:
ftp://download.nvidia.com/XFree86/packaging/linux/new-kbuild-for-355/
* Added experimental full OpenGL support to EGL.
* Marked the DeleteUnusedDP12Displays option as deprecated.

Version 1.5.0 of the X Resize and Rotate specification added a note
that dynamically-created outputs will not be destroyed, so this
option is deprecated and will be removed in a future driver release.
Added support for VDPAU profiles added in VDPAU 0.9:
VDP_DECODER_PROFILE_H264_BASELINE
VDP_DECODER_PROFILE_H264_CONSTRAINED_BASELINE
VDP_DECODER_PROFILE_H264_EXTENDED
VDP_DECODER_PROFILE_H264_PROGRESSIVE_HIGH
VDP_DECODER_PROFILE_H264_CONSTRAINED_HIGH
* Fixed a bug that prevented more than one RandR output from sharing
user-added modes.
* Fixed a bug that caused application-specified swap intervals to be
ignored on some screens when using Xinerama.
* Fixed a bug that caused user-supplied RandR modes with nonsensical
combinations of the +HSync, -HSync, +VSync, and -VSync flags to
corrupt the mode list.
* Added support to make an OpenGL 3.0 and above context current
without making current to any drawable.

-------------------------------------------------------------------
Thu Aug 06 23:49:45 CEST 2015 - bumblebee.obs@gmail.com

- Update to 352.30

* Added support for the following GPU:
GeForce 910M
* Fixed a bug that caused poor video post-processing performance in
VDPAU when operating on a large number of video streams simultaneously.
* Fixed a bug that could cause an Xid error when terminating a video
playback application using the overlay presentation queue in VDPAU.
* Updated nvidia-installer to avoid recursing too deeply into kernel
source trees under /usr/lib/modules, mirroring an existing restriction
on recursion under /lib/modules.
* Fixed a rare deadlock condition when running applications that use
OpenGL in multiple threads on a Quadro GPU.
* Fixed a kernel memory leak that occurred when looping hardware -
accelerated video decoding with VDPAU on Maxwell-based GPUs.
* Fixed a bug that caused the X server to crash if a RandR 1.4 output
provided by a Sink Output provider was selected as the primary output
on X.Org xserver 1.17 and higher.
* Fixed a bug that caused waiting on X Sync Fence objects in OpenGL to
hang indefinitely in some cases.
* Fixed a bug that prevented OpenGL from properly recovering from hardware
errors or sync object waits that had timed out.

-------------------------------------------------------------------
Thu Aug 06 23:34:31 CEST 2015 - bumblebee.obs@gmail.com

- Update to 352.21

* Added support for the following GPUs:
GeForce 720A
GeForce 920A
GeForce 930A
GeForce 940A
GeForce GTX 950A
GeForce GTX 980 Ti
* Fixed a bug that caused the Display Configuration page of the
nvidia-settings control panel to automatically generate layouts with
multiple displays occupying the same position when enabling or disabling
Base Mosaic.
* Updated nvidia-settings to allow the use of the standard Display Configuration
page when SLI Mosaic is enabled.
* Fixed a bug that caused the kernel to report errors when unmapping DMA
allocations on kernels with CONFIG_DEBUG_DMA_API enabled.
* Added GLX Protocol support for the following OpenGL extensions:
GL_ARB_copy_buffer
GL_ARB_texture_buffer_object
* Fixed a bug that caused a kernel crash if SLI Mosaic and G-SYNC were used
at the same time on a configuration with more display devices connected
to one GPU than another.
* Added the ability to configure the swapping behavior for quad-buffered
stereo visuals. The driver can be configured to independently swap each
eye as it becomes ready, to wait for both eyes to complete rendering before
swapping, or to allow applications to specify which of these two behaviors
is preferred by setting the swap interval. This setting can be adjusted in
the nvidia-settings control panel, or via the NV-CONTROL API.
* Fixed a regression which caused the GPU fan status display to disappear from
the nvidia-settings control panel.
* Added reporting of ECC error counts to the nvidia-settings control panel.
* Fixed a bug that sometimes prevented OpenGL sampler objects from being properly
deallocated when destroying OpenGL contexts.
* Fixed a bug that caused GLX_EXT_framebuffer_sRGB to incorrectly report sRGB
support in 30 bit-per-pixel framebuffer configurations.
* Added support for G-SYNC with sync-to-vblank disabled. This allows applications
to use G-SYNC to eliminate tearing for frame rates below the monitor's maximum
refresh rate but allow tearing above the maximum refresh rate in order to
minimize latency.

When G-SYNC is active and sync-to-vblank is enabled, the frame rate is limited
to the monitor's maximum refresh rate.

* GLSL gl_Fog.scale is now +infinity when gl_Fog.end equals gl_Fog.start.
Previously, the value 0 was used, but this broke certain applications such
as the game XIII running on Wine (Wine bug #37068).
* Enabled G-SYNC by default when Unified Back Buffer (UBB) is disabled.
* Updated the NVIDIA GPU driver to avoid using video memory already in use
by vesafb.
* Fixed a bug in nvidia-settings that caused the application to crash when
saving the EDID to a file.
* Fixed a bug that prevented the "mkprecompiled" utility included in the
driver package from reading files correctly.
* Fixed a bug that could cause an Xid error when terminating a video playback
application using the overlay presentation queue in VDPAU.
* Updated nvidia-installer to avoid recursing too deeply into kernel source
trees under /usr/lib/modules, mirroring an existing restriction on recursion
under /lib/modules.
* Fixed a rare deadlock condition when running applications that use OpenGL in
multiple threads on a Quadro GPU.
* Fixed a kernel memory leak that occurred when looping hardware- accelerated
video decoding with VDPAU on Maxwell-based GPUs.
* Fixed a bug that caused the X server to crash if a RandR 1.4 output provided
by a Sink Output provider was selected as the primary output on
X.Org xserver 1.17 and higher.
* Fixed a bug that caused waiting on X Sync Fence objects in OpenGL to hang
indefinitely in some cases.
* Fixed a bug that prevented OpenGL from properly recovering from hardware
errors or sync object waits that had timed out.

-------------------------------------------------------------------
Thu Aug 06 23:21:56 CEST 2015 - bumblebee.obs@gmail.com

- Update to 352.09

* Added the ability to configure the swapping behavior for quad-buffered
stereo visuals. The driver can be configured to independently swap each
eye as it becomes ready, to wait for both eyes to complete rendering
before swapping, or to allow applications to specify which of these two
behaviors is preferred by setting the swap interval. This setting can be
adjusted in the nvidia-settings control panel, or via the NV-CONTROL API.
* Fixed a regression which caused the GPU fan status display to disappear
from the nvidia-settings control panel.
* Added reporting of ECC error counts to the nvidia-settings control panel.
* Fixed a bug that sometimes prevented OpenGL sampler objects from being
properly deallocated when destroying OpenGL contexts.
* Fixed a bug that caused GLX_EXT_framebuffer_sRGB to incorrectly report
sRGB support in 30 bit-per-pixel framebuffer configurations.
* Added support for G-SYNC with sync-to-vblank disabled. This allows
applications to use G-SYNC to eliminate tearing for frame rates below
the monitor's maximum refresh rate but allow tearing above the maximum
refresh rate in order to minimize latency.

When G-SYNC is active and sync-to-vblank is enabled, the frame rate is
limited to the monitor's maximum refresh rate.

-------------------------------------------------------------------
Thu Aug 06 22:50:01 CEST 2015 - bumblebee.obs@gmail.com

- Update to 349.16

* Added support for the following GPUs:
Quadro K1200
Quadro M6000
GeForce 920M
GeForce 930A
GeForce 930M
GeForce 940M
GeForce GTX 950M
GeForce GTX 960M
GeForce GTX TITAN X
* Added support for G-SYNC monitors when used together with
non-G-SYNC monitors. When G-SYNC is enabled, non-G-SYNC
monitors will display with tearing.
* Fixed a bug that caused nvidia-settings to crash when assigning
an attribute whose value is a display ID on a system with
multiple X screens.
* Updated the reporting of in-use video memory in the nvidia-settings
control panel to use the same accounting methods used in other tools
such as nvidia-smi. nvidia-settings was not taking some allocations
into account, e.g. framebuffer memory for the efifb console on UEFI
systems, causing discrepancies in the values reported by different tools.
* Removed the "EnableACPIHotkeys" X configuration option. This option
has been deprecated and disabled by default since driver version 346.35.
On modern Linux systems, display change hotkey events are delivered to
the desktop environment as key press events, and the desktop environment
handles the display change by issuing requests through the X Resize and
Rotate extension (RandR).
* Added support for lossless H.264/AVC video streams to VDPAU.
* Added support for VDPAU Feature Set F to the NVIDIA VDPAU driver.
GPUs with VDPAU Feature Set F are capable of hardware-accelerated
decoding of H.265/HEVC video streams.
* Fixed a bug that prevented GPU fan speed changes from getting reflected
in the text box on Thermal settings page.
* Added nvidia-settings commandline support to query the current and
targeted GPU fan speed.
* Added a checkbox to nvidia-settings to enable a visual indicator that
shows when G-SYNC is being used. This is helpful for displays that
don't indicate themselves whether they are operating in G-SYNC mode or
normal mode.

This setting can also be enabled by running the command line

nvidia-settings -a ShowGSYNCVisualIndicator=1

* Added support for the X.Org X server's "-background none" option. When
enabled, the NVIDIA driver will try to copy the framebuffer console's
contents out of /dev/fb0. If that cannot be done, then the screen is
cleared to black.
* Added support for YUV 4:2:0 compression to enable HDMI 2.0 4K@60Hz modes
when either the display or GPU is incapable of driving these modes in
RGB 4:4:4. See NoEdidHDMI2Check in the README for details.
* Fixed a bug that could cause multi-threaded applications to crash when
multiple threads used the EGL driver at the same time.
* Fixed a bug that caused Sync to VBlank to not work correctly with
XVideo applications in certain configurations.
* Fixed a bug that prevented the X driver from correctly interpreting
some X configuration options when a display device name was given
with a GPU UUID qualifier.
* Fixed Pixel Buffer Object operations when row length is less than width.
GL_[UN]PACK_ROW_LENGTH can be set to a value lower than the width of
the operation being carried out. The OpenGL specification allows for
this (the source or destination lines will be overlapping). Previously,
our implementation of Pixel Buffer Objects did not support this case and
would throw an error.
* Fixed a bug that caused corruption when switching display modes in some
applications that use transform feedback.
* Fixed a bug that caused texture corruption on framebuffer depth
attachments cleared using glClearTexImage().
* Fixed a bug that artificially limited the maximum pixel clock on
displays in some SLI Mosaic configurations.
* Fixed a kernel memory leak that occurred when looping hardware-accelerated
video decoding with VDPAU on Maxwell-based GPUs.

-------------------------------------------------------------------
Sun Apr 12 20:01:00 CEST 2015 - bumblebee.obs@gmail.com

- Update to 349.12

* Added support for G-SYNC monitors when used together with
non-G-SYNC monitors.When G-SYNC is enabled,
non-G-SYNC monitors will display with tearing.
* Fixed a bug that caused nvidia-settings to crash when assigning
an attribute whose value is a display ID on a system with
multiple X screens.
* Updated the reporting of in-use video memory in
the nvidia-settings control panel to use the same accounting
methods used in other tools such as nvidia-smi. nvidia-settings
was not taking some allocations into account, e.g. framebuffer
memory for the efifb console on UEFI systems, causing discrepancies
in the values reported by different tools.
* Removed the "EnableACPIHotkeys" X configuration option. This
option has been deprecated and disabled by default since driver
version 346.35. On modern Linux systems, display change hotkey
events are delivered to the desktop environment as key press events,
and the desktop environment handles the display change by issuing
requests through the X Resize and Rotate extension (RandR).
* Added support for lossless H.264/AVC video streams to VDPAU.
* Added support for VDPAU Feature Set F to the NVIDIA VDPAU driver.
GPUs with VDPAU Feature Set F are capable of hardware-accelerated
decoding of H.265/HEVC video streams.
* Fixed a bug that prevented GPU fan speed changes from getting
reflected in the text box on Thermal settings page.
* Added nvidia-settings commandline support to query the current
and targeted GPU fan speed.
* Added a checkbox to nvidia-settings to enable a visual indicator
that shows when G-SYNC is being used.This is helpful for displays
that don't indicate themselves whether they are operating in G-SYNC
mode or normal mode.

This setting can also be enabled by running the command line

nvidia-settings -a ShowGSYNCVisualIndicator=1

-------------------------------------------------------------------
Sun Apr 12 19:44:14 CEST 2015 - bumblebee.obs@gmail.com

- Update to 346.47

* Added support for the following GPUs:
Quadro M6000
Quadro K1200
GeForce GTX TITAN X
Quadro K620M
Quadro K2200M
GeForce GTX 965M
* Fixed a bug that could cause rendering corruption in GLX clients
using PBOs and/or VBOs when using GLX indirect rendering.
* Fixed a bug that caused Xinerama layouts which included X screens
with 'Option "UseDisplayDevice" "none"' to be represented incorrectly
in the nvidia-settings control panel.
* Fixed a bug that could cause glXSwapBuffer() to block for longer than
necessary in multi-threaded GLX applications using
the GLX_NV_delay_before_swap extension.
* Fixed a bug that caused OpenGL applications using
the NV_path_rendering extension to crash after a modeswitch event.
* Fixed a bug that caused DisplayPort audio to stop working after
monitors are hotplugged.

-------------------------------------------------------------------
Tue Feb 10 20:21:05 CEST 2015 - bumblebee.obs@gmail.com

- Update to 346.35

* Added support for the following GPUs:
GeForce GTX 960
GeForce 800A
GeForce 800M
GeForce GTX 970M
GeForce GTX 980M
* Added support for X.Org xserver ABI 19 (xorg-server 1.17).
* Improved compatibility with recent Linux kernels.
* Fixed a bug that prevented internal 4K panels on some laptops
from being driven at a sufficient bandwidth to support their
native resolutions.
* Fixed a regression that prevented the NVIDIA kernel module from
loading in some virtualized environments such as Amazon Web Services.
* Fixed a regression that caused displays to be detected incorrectly
on some notebook systems.
* Fixed a bug that could cause X to freeze when using Base Mosaic.
* Fixed a regression that prevented the NVIDIA X driver from recognizing
Base Mosaic layouts generated by the nvidia-settings control panel.
* Updated the NVIDIA X driver to reject frame packed interlaced
HDMI 3D modes during mode validation. These modes were being validated by
the driver, despite never having been supported.
* Fixed a bug that prevented the console from being restored after
forcefully terminating X, on some GPUs with multiple DisplayPort
monitors attached. This bug also subsequently prevented X from
being started following the failed console restoration.
* Updated the version of libvdpau shipped with the driver to 0.9.
This version honors the VDPAU_DRIVER_PATH environment variable and
fixes a race condition if multiple threads call VdpDeviceCreateX11
simultaneously. See

http://lists.freedesktop.org/archives/vdpau/2014-December/000274.html

for more information.

Please note that users are encouraged to use their distribution's
libvdpau packages rather than relying on the one shipped with the
NVIDIA graphics driver.
* Fixed a bug that caused the ACPI hotkey mask to be set incorrectly
on some laptops even when the EnableACPIHotkeys option is disabled.
* Disabled the EnableACPIHotkeys option by default. This option is
now considered deprecated and will be removed in a future driver
release. On modern Linux systems, display change hotkey events are
delivered to the desktop environment as key press events, and the
desktop environment handles the display change by issuing requests
through the X Resize and Rotate extension (RandR).
* Fixed a bug that caused the screen image to be shifted when screen
transformations (such as rotations or reflections) were enabled on
a G-SYNC display attached to a Kepler-based GPU.
* Fixed a bug that caused a blank screen when setting a mode requiring
YUV 4:2:0 compression. These modes are not currently supported.
* Fixed a bug that caused an incorrect DisplayPort link configuration
to be displayed after a hotplug or unplug.
* Added support for decoding VP8 video streams using the NVCUVID API
on GPUs with VP8 hardware decode support.
* Added support for the following EGL extensions:
EGL_EXT_device_base
EGL_EXT_platform_device
EGL_EXT_output_base
* Added the ability to increase the operating voltage on certain
GeForce GPUs in the GeForce GTX 400 series and later. Voltage
adjustments are done at the user's own risk. See the documentation
on the "CoolBits" X configuration option in the README for details.
* Added support for NVENC on GeForce GPUs. For more details on the
NVENC SDK, see: https://developer.nvidia.com/nvidia-video-codec-sdk.
* Removed a sanity check in nvidia-installer that tested the
availability of POSIX shared memory. The NVIDIA GPU driver has not
required POSIX shared memory since release 270.xx.
* Removed the NVIDIA Unified Memory kernel module, nvidia-uvm.ko,
from the driver package on 32-bit architectures.
* Added accelerated support for r8g8b8a8, r8g8b8x8, b8g8r8a8 and
b8g8r8x8 RENDER formats.
* Updated nvidia-settings to take advantage of GTK+ 3, when available.
This is implemented by building the nvidia-settings user interface
into separate shared libraries (libnvidia-gtk2.so, libnvidia-gtk3.so),
and loading the correct one at run-time.
* Added the nvidia-settings option --gtk-library to allow specifying
the path of the directory containing the user interface library or
the path and filename of the specific library to use.
* Added support in nvidia-settings for a GTK+ 3 user interface
on x86 and x86_64.
* Added the nvidia-settings option --use-gtk2 to force the use of
the GTK+ 2 UI library.
* Updated nvidia-installer to install a file in the system's
xorg.conf.d directory, when a sufficiently new X server is detected,
to cause the X server to load the "nvidia" X driver automatically
if it is started after the NVIDIA kernel module is loaded.

This feature is supported in X.Org xserver 1.16 and higher when
running on Linux 3.9 or higher with CONFIG_DRM enabled.
Improved the performance of nvidia-installer by enabling the use
of parallel make when building the NVIDIA kernel modules.
The concurrency level can be set with the --concurrency-level
option, and defaults to the number of detected CPUs.
Updated nvidia-installer to determine default installation
locations for libraries based on the presence of known paths
in the ldconfig(8) cache and the filesystem, rather than
hardcoded distro-specific paths.
* Fixed a GLSL compiler bug that would produce corruption when
running games such as Far Cry 3 in Wine.
* Fixed the EGL_KHR_stream_cross_process_fd extension.
* Fixed rendering corruption that sometimes happened when calling
DrawElementsInstancedBaseVertexBaseInstance(),
DrawElementsInstancedBaseInstance(), or
DrawArraysInstancedBaseInstance().
* Dramatically improved OpenGL Framebuffer Object creation
performance.
* Removed the limit on the maximum number of
OpenGL Framebuffer Objects.
* Updated the NVIDIA OpenGL driver to prefer $XDG_CACHE_HOME over
$HOME as the default location for storing the GL shader disk cache.

-------------------------------------------------------------------
Tue Dec 23 11:02:38 CEST 2014 - bumblebee.obs@gmail.com

- Update to 346.22

* Added support for X.Org xserver ABI 19 (xorg-server 1.17).
* Improved compatibility with recent Linux kernels.
* Fixed a bug that prevented internal 4K panels on some laptops
from being driven at a sufficient bandwidth to support their
native resolutions.
* Fixed a regression that prevented the NVIDIA kernel module
from loading in some virtualized environments such as
Amazon Web Services.
* Fixed a regression that caused displays to be detected
incorrectly on some notebook systems.
* Fixed a bug that could cause X to freeze when using Base Mosaic.
* Fixed a regression that prevented the NVIDIA X driver from
recognizing Base Mosaic layouts generated by the nvidia-settings
control panel.

-------------------------------------------------------------------
Tue Dec 23 10:50:09 CEST 2014 - bumblebee.obs@gmail.com

- Update to 346.16

* Added support for the following GPUs:
GeForce GTX 970M
GeForce GTX 980M
* Fixed a bug that caused a blank screen when setting a mode
requiring YUV 4:2:0 compression. These modes are not currently
supported.
* Fixed a bug that caused an incorrect DisplayPort link
configuration to be displayed after a hotplug or unplug.
* Added support for decoding VP8 video streams using the
NVCUVID API on GPUs with VP8 hardware decode support.
* Added support for the following EGL extensions:
EGL_EXT_device_base
EGL_EXT_platform_device
EGL_EXT_output_base
* Added the ability to increase the operating voltage on certain
GeForce GPUs in the GeForce GTX 400 series and later. Voltage
adjustments are done at the user's own risk. See the documentation on
the "CoolBits" X configuration option in the README for details.
* Added support for NVENC on GeForce GPUs. For more details on
the NVENC SDK, see:
https://developer.nvidia.com/nvidia-video-codec-sdk.
* Removed a sanity check in nvidia-installer that tested the availability
of POSIX shared memory. The NVIDIA GPU driver has not required POSIX
shared memory since release 270.xx.
* Added accelerated support for r8g8b8a8, r8g8b8x8, b8g8r8a8 and
b8g8r8x8 RENDER formats.
* Updated nvidia-settings to take advantage of GTK+ 3, when available.
This is implemented by building the nvidia-settings user interface into
separate shared libraries (libnvidia-gtk2.so, libnvidia-gtk3.so),
and loading the correct one at run-time.
* Added the nvidia-settings option --gtk-library to allow specifying
the path of the directory containing the user interface library or
the path and filename of the specific library to use.
* Added support in nvidia-settings for a GTK+ 3 user interface on
x86 and x86_64.
* Added the nvidia-settings option --use-gtk2 to force the use of
the GTK+ 2 UI library.
* Updated nvidia-installer to install a file in the system's xorg.conf.d
directory, when a sufficiently new X server is detected, to cause
the X server to load the "nvidia" X driver automatically if it is
started after the NVIDIA kernel module is loaded.
This feature is supported in X.Org xserver 1.16 and higher when running
on Linux 3.9 or higher with CONFIG_DRM enabled.
* Improved the performance of nvidia-installer by enabling the use of
parallel make when building the NVIDIA kernel modules. The concurrency level
can be set with the --concurrency-level option, and defaults to
the number of detected CPUs.
* Updated nvidia-installer to determine default installation locations
for libraries based on the presence of known paths in the ldconfig(8)
cache and the filesystem, rather than hardcoded distro-specific paths.
* Fixed a GLSL compiler bug that would produce corruption when running
games such as Far Cry 3 in Wine.
* Fixed the EGL_KHR_stream_cross_process_fd extension.
* Fixed rendering corruption that sometimes happened when calling
DrawElementsInstancedBaseVertexBaseInstance(),
DrawElementsInstancedBaseInstance(),
or DrawArraysInstancedBaseInstance().
* Dramatically improved OpenGL Framebuffer Object creation performance.
* Removed the limit on the maximum number of OpenGL Framebuffer Objects.
* Updated the NVIDIA OpenGL driver to prefer $XDG_CACHE_HOME over $HOME as
the default location for storing the GL shader disk cache.

-------------------------------------------------------------------
Tue Dec 23 10:11:17 CEST 2014 - bumblebee.obs@gmail.com

- Update to 340.65

* Added support for X.Org xserver ABI 19 (xorg-server 1.17).
* Improved compatibility with recent Linux kernels.
* Fixed a bug that prevented internal 4K panels on some laptops
from being driven at a sufficient bandwidth to support their
native resolutions.
* Fixed a regression that prevented the NVIDIA kernel module from
loading in some virtualized environments such as Amazon Web Services.
* Fixed a regression that caused displays to be detected incorrectly
on some notebook systems.
* Fixed a bug that could cause X to freeze when using Base Mosaic.
* Fixed a regression that prevented the NVIDIA X driver from recognizing
Base Mosaic layouts generated by the nvidia-settings control panel.

-------------------------------------------------------------------
Tue Dec 23 10:03:46 CEST 2014 - bumblebee.obs@gmail.com

- Update to 340.58

* Added support for the following GPUs:
GeForce GT820M
GeForce GTX 760A
GeForce GTX 850A
GeForce 810A
GeForce 820A
GeForce 840A
* Fixed a bug that could cause VT-switching to fail following a
suspend, resume, and driver reload sequence.
* Fixed a bug that caused incorrect colors to be displayed on
X screens running at depth 8 on some GPUs.
* Fixed a bug that prevented GPUs from being correctly recognized
in MetaMode strings when identified by UUID.
* Implemented support for disabling indirect GLX context creation using
the -iglx option available on X.Org server release 1.16 and newer.
Note that future X.Org server releases may make the -iglx option the default.
To re-enable support for indirect GLX on such servers, use the +iglx option.
* Added the "AllowIndirectGLXProtocol" X config option. This option can
be used to disallow use of GLX protocol. See "Appendix B. X Config Options"
in the README for more details.

-------------------------------------------------------------------
Mon Oct 20 21:43:25 CEST 2014 - bumblebee.obs@gmail.com

- Update to 340.46

* Fixed an OpenGL issue that could cause glReadPixels() operations to be
improperly clipped when resizing composited application windows,
potentially leading to momentary X freezes.
* Fixed a bug that could prevent the GLSL compiler from correctly
evaluating some expressions when compiling shaders.
* Fixed a bug that could cause nvidia-installer to crash while attempting to
run nvidia-xconfig on systems where that utility is missing.
* Added option UseSysmemPixmapAccel to control the use of GPU acceleration
for X drawing operations on pixmaps allocated in system memory.

-------------------------------------------------------------------
Mon Sep 1 09:36:29 CEST 2014 - bumblebee.obs@gmail.com

- Update to 340.32

* Added support for the following GPUs:
Quadro K420
Quadro K620
Quadro K2200
Quadro K4200
Quadro K5200
* Fixed a regression that prevented the internal stereo infrared
emitter built into some 3D Vision monitors from working.
* Fixed a bug that could cause some Java-based OpenGL applications
using JOGL to crash on startup on systems with Xinerama enabled.
* Fixed a bug that could prevent OpenGL Framebuffer Objects (FBOs) from
being properly redrawn after a modeswitch.
* Fixed a memory leak that occurred when starting OpenGL applications.
* Fixed a bug that prevented the EDID-Like Data (ELD) of audio-capable
displays from being updated when hotplugged/unplugged.
* Fixed a bug that caused Xid errors when using stereo mode 12 (HDMI 3D)
on Quadro boards without an onboard stereo DIN connector.
* Fixed a video corruption issue for VDPAU decoding of VC-1 and WMV video
streams utilizing range remapping on Maxwell GPUs.
* Fixed a "black window" bug in Ubuntu 14.04 when using the Xinerama and
Composite extensions.
* Fixed a bug that caused the screen's contents to be shifted downward
when a G-SYNC monitor is unplugged and replaced by a non-G-SYNC monitor.
* Fixed a bug that prevented G-SYNC from working when a G-SYNC monitor
was unplugged and plugged back in without a modeset.

-------------------------------------------------------------------
Fri Aug 8 22:02:17 CEST 2014 - bumblebee.obs@gmail.com

- Update to 340.24

* Fixed a bug that prevented 3D Vision stereo and ultra low motion
blur modes from working on G-SYNC capable monitors in some cases.
* Fixed a bug that caused the "Allow G-SYNC" checkbox to be displayed
in nvidia-settings even if the GPUs in the system are not
capable of G-SYNC.
* Fixed a kernel crash when running some applications with
IOMMU functionality enabled.
* Fixed a floating point exception in the OpenGL driver when
running "Risk of Rain" under Wine.
* Made various improvements and corrections to the information reported
to GL applications via the KHR_debug and ARB_debug_output extensions.
* Fixed a bug that caused GLX applications which simultaneously create
drawables on multiple X servers to crash when swapping buffers.
* Updated nvidia-settings to report all valid names for each target when
querying target types, e.g. `nvidia-settings -q gpus`.
* Added support for controlling the availability of
Fast Approximate Antialiasing (FXAA) on a per-application basis via the
new __GL_ALLOW_FXAA_USAGE environment variable and the corresponding
GLAllowFXAAUsage application profile key. See the README for details.
* Fixed a bug where indirect rendering could become corrupted on system
configurations that disallow writing to executable memory.
* Updated the nvidia-settings Makefiles to allow nvidia-settings to be
dynamically linked against the host system's libjansson. This option
can be enabled by setting the NV_USE_BUNDLED_LIBJANSSON Makefile variable
to 0.Please note that nvidia-settings requires libjansson version 2.2 or later.
* Removed the runlevel check from nvidia-installer: the installation
problems formerly associated with runlevel 1 no longer apply.
* Added initial support for G-SYNC monitors.Additional details and system
requirements can be found at:

http://www.geforce.com/hardware/technology/g-sync
* Improved support for running the NVIDIA driver in configurations where
writing to executable memory is disallowed.Driver optimizations that require
writing to executable memory can be forcefully disabled using the new
GL_WRITE_TEXT_SECTION environment variable.See the README for more details.
* Fixed an X driver bug that caused gamma ramp updates of the green channel
at depth 15, on some recent GPUs, to be ignored.
* Fixed a regression, introduced in the 340.17 public beta release, that
caused the NVIDIA X driver to access freed memory when exiting a
GLX application that used either of the GLX_NV_video_out or
GLX_NV_present_video extensions.

-------------------------------------------------------------------
Fri Jun 13 15:17:33 CEST 2014 - bumblebee.obs@gmail.com

- Update to 340.17

* Made various improvements and corrections to the information
reported to GL applications via the KHR_debug and
ARB_debug_output extensions.
* Fixed a bug that caused GLX applications which simultaneously
create drawables on multiple X servers to crash when swapping buffers.
* Updated nvidia-settings to report all valid names for each target
when querying target types, e.g. `nvidia-settings -q gpus`.
* Added support for controlling the availability of
Fast Approximate Antialiasing (FXAA) on a per-application basis via
the new __GL_ALLOW_FXAA_USAGE environment variable and
the corresponding GLAllowFXAAUsage application profile key.
See the README for details.
* Fixed a bug where indirect rendering could become corrupted on system
configurations that disallow writing to executable memory.
* Updated the nvidia-settings Makefiles to allow nvidia-settings to be
dynamically linked against the host system's libjansson. This option
can be enabled by setting the NV_USE_BUNDLED_LIBJANSSON Makefile
variable to 0. Please note that nvidia-settings requires libjansson
version 2.2 or later.
* Removed the runlevel check from nvidia-installer: the installation
problems formerly associated with runlevel 1 no longer apply.
* Added initial support for G-SYNC monitors. Additional details and
system requirements can be found at:

-------------------------------------------------------------------
Fri Jun 13 14:21:08 CEST 2014 - bumblebee.obs@gmail.com

- Update to 337.25

* Added support for the following GPUs:
GeForce GTX TITAN Z
GeForce GT 740
GeForce 830M
GeForce 840M
GeForce 845M
GeForce GTX 850M
* Fixed a bug that caused X to crash when querying clock
offsets for non-existent performance levels.
* Fixed a performance regression when running KDE with desktop
effects using the OpenGL compositing backend.
* Fixed a bug that caused duplicate entries to appear in some
dropdown menus in the "Application Profiles" page of nvidia-settings.
* Fixed a regression that could cause OpenGL rendering corruption
on X screens with 30 bit per pixel color.
* Fixed a bug causing mode validation to fail for 4K resolutions over
HDMI in certain situations.
* Added nvidia-settings command line controls for over- and
under-clocking attributes. Please see the nvidia-settings(1) manual
page for more details.
* Fixed several cosmetic issues in the clock control user interface of
nvidia-settings.
* Added support for the GLX_EXT_stereo_tree extension. For more details,
see the extension specification:
http://www.opengl.org/registry/specs/EXT/glx_stereo_tree.txt
* Enabled support for using Unified Back Buffer (UBB) and 3D Stereo with
the composite extension on Quadro cards. Using stereo with a composite
manager requires a stereo-aware composite manager. Otherwise, only
the left eye of stereo applications will be displayed. See
the GLX_EXT_stereo_tree extension specification for more details.
* Fixed a bug that could cause OpenGL programs to freeze under some low
memory conditions.
* Updated the display configuration page in nvidia-settings to uniquely
identify DisplayPort 1.2 monitors by displaying the monitor GUIDs.
* Fixed a bug that could cause ECC settings to be displayed incorrectly
in nvidia-settings when changing ECC settings on a multi-GPU system.
* Removed the "OnDemandVBlankInterrupts" X configuration option: this
option has been enabled by default since version 177.68 of
the NVIDIA Unix driver, and the documentation had not been updated to
reflect the new default value.
* Fixed a bug that caused GPU errors when hotplugging daisy-chained
DisplayPort 1.2 displays.
* Updated the color correction settings page in the nvidia-settings
control panel to reflect gamma changes made by other RandR clients
while the control panel was already running.
* Fixed a bug that prevented the use of multiple simultaneous
X servers on UEFI systems.
* Updated the nvidia-settings source package to build libXNVCtrl when
building nvidia-settings, instead of relying on a pre-built library.
* Added the ability to over- and under-clock certain GeForce GPUs in
the GeForce GTX 400 series and later. For GPUs that allow it, an
offset can be applied to clock values in some clock domains of
some performance levels. This clock manipulation is done at the
user's own risk. See the README documentation of
the "CoolBits" X configuration option for more details.
* Updated the minimum required version of GTK+ from 2.2 to 2.4 for
nvidia-settings.
* Renamed the RandR output property _GUID to GUID now that it is
an official property documented in randrproto.txt:
http://cgit.freedesktop.org/xorg/proto/randrproto
/commit/?id=19fc4c5a72eb9919d720ad66734029d9f8e313b1
* Reduced CPU utilization and GPU memory utilization of
the NVIDIA EGL driver.
* Added support for the following EGL extensions:
- EGL_EXT_buffer_age;
- EGL_EXT_client_extensions;
- EGL_EXT_platform_base;
- EGL_EXT_platform_x11.
* Renamed the "Clone" setting of the "MetaModeOrientation"
X configuration option to "SamePositionAs", to make clear that
this setting applies to the position only, and not to the resolution
of modes in the MetaMode.
* Added NV-CONTROL attribute NV_CTRL_VIDEO_ENCODER_UTILIZATION to
query utilization percentage of the video encoder engine.
* Added support for the GLX_NV_delay_before_swap extension. For more
details, see the extension specification:
http://www.opengl.org/registry/specs/NV/glx_delay_before_swap.txt
* Report correct buffer sizes for RGB GLX visuals, GLXFBConfigs,
and EGLConfigs. Previously, RGB10 and RGB8 formats were reported as
having 32 bits, and RGB5 formats were reported as having 16 bits.
Now they are correctly reported as 30, 24, and 15 bit formats
respectively as required by the GLX and EGL specifications.

-------------------------------------------------------------------
Sun May 11 13:26:43 CEST 2014 - bumblebee.obs@gmail.com

- Update to 337.19

* Fixed a bug causing mode validation to fail for 4K resolutions
over HDMI in certain situations.
* Added nvidia-settings command line controls for over- and
under-clocking attributes. Please see the nvidia-settings(1) manual
page for more details.
* Fixed several cosmetic issues in the clock control user interface
of nvidia-settings.
* Added support for the GLX_EXT_stereo_tree extension. For more details,
see the extension specification:

http://www.opengl.org/registry/specs/EXT/glx_stereo_tree.txt

* Enabled support for using Unified Back Buffer (UBB) and 3D Stereo
with the composite extension on Quadro cards. Using stereo with
a composite manager requires a stereo-aware composite manager.
Otherwise, only the left eye of stereo applications will be displayed.
See the GLX_EXT_stereo_tree extension specification for more details.
* Fixed a bug that caused blank screens and flickering when rotating
displays in a Base Mosaic layout.
* Fixed a bug that caused BadRRCrtc or BadRROutput errors for
big-endian X11 clients making certain XRandR requests.
* Fixed a bug that corrupted certain software rendering, notably
the stippled text used to represent disabled entries in
xterm's pop-up menus.
* Fixed a bug that caused corruption or blank screens on monitors that
use EDID version 1.3 or older when they are connected via
DisplayPort on graphics boards that use external DisplayPort encoders,
such as the Quadro FX 4800.

-------------------------------------------------------------------
Thu Apr 10 11:57:01 CEST 2014 - bumblebee.obs@gmail.com

- Update to 337.12

* Added support for the following GPUs:
GeForce 830M
GeForce 840M
GeForce 845M
GeForce GTX 850M
GeForce GTX 860M
GeForce GTX 870M
GeForce GTX 880M
GeForce GT 705
GeForce GT 720
* Fixed a bug that could cause OpenGL programs to freeze under some low
memory conditions.
* Updated the display configuration page in nvidia-settings to uniquely
identify DisplayPort 1.2 monitors by displaying the monitor GUIDs.
* Fixed a bug that could cause ECC settings to be displayed incorrectly
in nvidia-settings when changing ECC settings on a multi-GPU system.
* Removed the "OnDemandVBlankInterrupts" X configuration option: this
option has been enabled by default since version 177.68 of the NVIDIA
Unix driver, and the documentation had not been updated to reflect
the new default value.
* Fixed a bug that caused GPU errors when hotplugging daisy-chained
DisplayPort 1.2 displays.
* Updated the color correction settings page in the nvidia-settings
control panel to reflect gamma changes made by other RandR clients
while the control panel was already running.
* Fixed a bug that prevented the use of multiple simultaneous X servers
on UEFI systems.
* Updated the nvidia-settings source package to build libXNVCtrl when
building nvidia-settings, instead of relying on a pre-built library.
* Added the ability to over- and under-clock certain GeForce GPUs in
the GeForce GTX 400 series and later. For GPUs that allow it, an
offset can be applied to clock values in some clock domains of some
performance levels. This clock manipulation is done at the user's
own risk. See the README documentation of the "CoolBits"
X configuration option for more details.
* Updated the minimum required version of GTK+ from 2.2 to 2.4 for
nvidia-settings.
* Renamed the RandR output property _GUID to GUID now that it is an
official property documented in randrproto.txt:

http://cgit.freedesktop.org/xorg/proto/randrproto/
commit/?id=19fc4c5a72eb9919d720ad66734029d9f8e313b1

* Reduced CPU utilization and GPU memory utilization of the
NVIDIA EGL driver.
* Added support for the following EGL extensions:
- EGL_EXT_buffer_age;
- EGL_EXT_client_extensions;
- EGL_EXT_platform_base;
- EGL_EXT_platform_x11.
* Renamed the "Clone" setting of the "MetaModeOrientation"
X configuration option to "SamePositionAs", to make clear that this
setting applies to the position only, and not to the resolution of
modes in the MetaMode.
* Added NV-CONTROL attribute NV_CTRL_VIDEO_ENCODER_UTILIZATION to query
utilization percentage of the video encoder engine.
* Added support for the GLX_NV_delay_before_swap extension. For more
details, see the extension specification:

http://www.opengl.org/registry/specs/NV/glx_delay_before_swap.txt

* Report correct buffer sizes for RGB GLX visuals, GLXFBConfigs, and
EGLConfigs. Previously, RGB10 and RGB8 formats were reported as
having 32 bits, and RGB5 formats were reported as having 16 bits.
Now they are correctly reported as 30, 24, and 15 bit formats
respectively as required by the GLX and EGL specifications.

-------------------------------------------------------------------
Thu Mar 23 13:14:47 CEST 2014 - bumblebee.obs@gmail.com

- Update to 334.21

* Added support for the following GPUs:

GeForce GTX 750 Ti
GeForce GTX 750
GeForce GTX 745
GeForce GTX TITAN Black
GeForce GT 710
GeForce 825M

* Fixed a regression in the NVIDIA kernel module which caused it to
improperly dereference a userspace pointer. This potential security
issue was initially reported to the public at:

http://forums.grsecurity.net/viewtopic.php?f=3&t=3922

* The regression did not affect NVIDIA GPU drivers before release 334.
* Fixed a bug that could cause OpenGL programs to hang after calling fork(2).
* Fixed a bug that could cause a multi-threaded OpenGL application to
crash when one of its threads exits after the application has unloaded libGL.
* Added support for GPUs with VDPAU Feature Set E. See the README for details.
* On GPUs with VDPAU Feature Set E, VDPAU now supports more robust decode
error handling at the cost of a minor performance impact. This can be
disabled by setting the VDPAU_NVIDIA_DISABLE_ERROR_CONCEALMENT environment
variable to 1.
* Added support for application profile rule patterns which are logical
operations of subpatterns. See the README for details.
* Added support for a "findfile" application profile feature which allows
the driver to apply profiles based on matching files in the same directory
as the process executable. See the README for details.
* Fixed a bug that caused nvidia-installer to log the automatically selected
answers to some user prompts without logging the prompt text itself,
when running in silent mode.
* Improved performance of OpenGL applications when used in conjunction with
the X driver's composition pipeline. The composition pipeline may be
explicitly enabled by using the ForceCompositionPipeline or
ForceFullCompositionPipeline MetaMode options, or implicitly enabled when
certain features such as some XRandR transformations, rotation,
Warp & Blend, PRIME, and NvFBC are used.
* Fixed a bug that could cause nvidia-settings to crash or display
incorrect information after switching virtual terminals while a color
correction confirmation countdown was active.
* Improved compatibility with recent Linux kernels.

-------------------------------------------------------------------
Sun Feb 23 16:15:32 CEST 2014 - bumblebee.obs@gmail.com

- Update to 334.16

* Fixed a bug that could cause nvidia-settings to compute incorrect gamma ramps
when adjusting the color correction sliders.
* Updated the nvidia-settings control panel to allow the selection of display
devices using RandR and target ID names when making queries targeted towards
specific display devices.
* Fixed a bug that prevented some dropdown menus in the nvidia-settings control
panel from working correctly on older versions of GTK+ (e.g. 2.10.x).
* Updated the nvidia-settings control panel to provide help text for application
profile keys and suggestions for valid key names when configuring application
profiles.
* Updated the nvidia-settings control panel to populate the dropdown menu of
stereo modes with only those modes which are available.
* Fixed a bug that could cause applications using the OpenGL extension
ARB_query_buffer_object to crash under Xinerama.
* Fixed a bug that caused high pixelclock HDMI modes (e.g. as used with
4K resolutions) to be erroneously reported as dual-link in the
nvidia-settings control panel.
* Fixed a bug that could cause poor stereo synchronization in large multi-monitor
setups using 3D Vision, due to failed hardware handshaking on some of the monitors.
* Fixed a bug that prevented some DisplayPort 1.2 displays from being properly
restored after a VT switch.
* Renamed per GPU proc directories in /proc/driver/nvidia/gpus/ with GPU's bus
location represented in "domain:bus:device.function" format.
* Added 64-bit EGL and OpenGL ES libraries to 64-bit driver prackages.
* Changed format of "Bus Location" field reported in the
/proc/driver/nvidia/gpus/0..N/information files from "domain:bus.device.function"
to "domain:bus:device.function" to match the lspci format.
* Fixed a bug in the GLX_EXT_buffer_age extension where incorrect ages would be
returned unless triple buffering was enabled.
* Updated the NVIDIA X driver to load the NVIDIA kernel module using
`nvidia-modprobe`, rather than the XFree86 DDX helper function
xf86LoadKernelModule().
* Changed the driver's default behavior to stop deleting RandR 1.2 outputs
corresponding to unused DisplayPort 1.2 devices. Deleting these outputs can
confuse some applications. Added a new option, DeleteUnusedDP12Displays, which
can be used to turn this behavior back on.

This option can be enabled by running

sudo nvidia-xconfig --delete-unused-dp12-displays
* Improved support for the __GL_SYNC_DISPLAY_DEVICE and
VDPAU_NVIDIA_SYNC_DISPLAY_DEVICE environment variables in certain configurations.
Both environment variables will now recognize all supported display device names.
See "Appendix C. Display Device Names" and "Appendix G. VDPAU Support" in the
README for more details.
* Improved performance of the X driver when handling large numbers of
surface allocations.
* Fixed a bug that caused PBO downloads of cube map faces to retrieve
incorrect data.
* Fixed a bug in nvidia-installer that resulted in spurious error messages when
opting out of installing the NVIDIA kernel module or source files for the
kernel module.
* Added experimental support for ARGB GLX visuals when Xinerama and Composite are
enabled at the same time on X.Org xserver 1.15.

-------------------------------------------------------------------
Sun Feb 23 15:56:40 CEST 2014 - bumblebee.obs@gmail.com

- Update to 331.49

* Added support for the following GPUs:

GeForce GT 710
GeForce 825M

* Fixed a regression that prevented nvidia-installer from cleaning up directories
created as part of the driver installation.
* Added a new X configuration option "InbandStereoSignaling" to enable/disable
DisplayPort in-band stereo signaling. See "Appendix B. X Config Options" in the
README for more information.
* Fixed a bug that caused PBO downloads of cube map faces to retrieve
incorrect data.
* Fixed a bug in nvidia-installer that resulted in spurious error messages when
opting out of installing the NVIDIA kernel module or source files for the
kernel module.
* Added experimental support for ARGB GLX visuals when Xinerama and Composite are
enabled at the same time on X.Org xserver 1.15.
* Fixed a bug which could sometimes corrupt a newly-created thread's signal mask in
multi-threaded applications that load libGL.
* Fixed a bug that prevented the NVIDIA implementation of the Xinerama extension
protocol requests from being used when RandR was enabled.

-------------------------------------------------------------------
Tue Jan 14 17:22:08 CEST 2014 - bumblebee.obs@gmail.com

- Update to 331.38

* Fixed a bug that caused the X server to crash if video memory is exhausted
and the GPU does not support rendering to system memory.
* Updated nvidia-installer to make the --multiple-kernel-modules option imply
the --no-unified-memory option: Unified memory is incompatible with multiple
kernel modules.
* Updated the behavior of the nvidia-settings PowerMizer Preferred Mode
drop-down menu, to make the setting apply consistently across all GPUs
in an SLI group.
* Improved the robustness of the NVIDIA X driver in scenarios where
GPU-accessible memory for allocating pixmaps was exhausted.
* Added NV-CONTROL attributes to control the brightness of the illuminated
logos on certain graphics boards.For example, to turn off the illumination
of the "GEFORCE GTX" lettering on the GeForce GTX 780, use
nvidia-settings --assign GPULogoBrightness=0
* Fixed a bug that prevented screen transformations from being applied
properly when starting X.
* GLX protocol for the following OpenGL extensions from OpenGL 2.1 and
OpenGL 3.0 have been promoted from unofficial to ARB approved official status:
GL_ARB_pixel_buffer_object
GL_NV_conditional_render
GL_ARB_map_buffer_range
GL_EXT_texture_integer
GL_ARB_vertex_array_object
GL_ARB_pixel_buffer_object was the last piece of protocol needed to have
official support for indirect rendering with all OpenGL 2.1 commands.

* GLX Protocol for the miscellaneous OpenGL 3.0 commands not associated with
specific extensions has also been promoted from unofficial to ARB approved status.
Deprecated display mask related configuration of display devices via NV-CONTROL
and nvidia-settings.Display target specifications should be used instead - A display
target is one of the display's valid names, with an optional GPU or X screen qualifier.
Deprecated the following NV-CONTROL attributes:
NV_CTRL_CONNECTED_DISPLAYS
NV_CTRL_ENABLED_DISPLAYS
NV_CTRL_ASSOCIATED_DISPLAYS
NV_CTRL_NOTEBOOK_INTERNAL_LCD
NV_CTRL_FRAMELOCK_MASTER
NV_CTRL_FRAMELOCK_SLAVES
NV_CTRL_FRAMELOCK_MASTERABLE
NV_CTRL_FRAMELOCK_SLAVEABLE
Also, although NV_CTRL_PROBE_DISPLAYS is still operational, the return value has
been deprecated and should not be used.

* Added deprecation warning messages in nvidia-settings when deprecated attributes
are used.This also includes display mask usage.

-------------------------------------------------------------------
Mon Nov 11 11:11:11 CEST 2013 - bumblebee.obs@gmail.com

- Update to 331.20

* Added support for NVIDIA OpenGL-based Framebuffer Capture (NvFBCOpenGL).
This library provides a high performance, low latency interface to capture
and optionally encode the composited framebuffer of an X screen.
NvFBC and NvIFR are private APIs that are only available to approved partners
for use in remote graphics scenarios. Please contact NVIDIA at
GRIDteam@nvidia.com for more information.
* Fixed a bug that prevented configuration files containing application profiles
from being loaded when directories were present in the application profile
configuration search path.
* Deferred initialization of libselinux in the NVIDIA OpenGL driver, in order to
avoid a problem where libselinux might not be ready when the NVIDIA
libGL shared library is first loaded.
* Fixed a bug that could lead to memory exhaustion in OpenGL applications
running on 32-bit systems.
* Added nvidia-uvm.ko, the NVIDIA Unified Memory kernel module, to the NVIDIA
Linux driver package. This kernel module provides support for the new
Unified Memory feature in an upcoming CUDA release.
* Fixed a bug that caused the X server to fail to initialize when DisplayPort 1.2
monitors were assigned to separate X screens on the same GPU.
* Fixed a bug that could cause a deadlock when forking from OpenGL programs
which use some malloc implementations, such as TCMalloc.
* Fixed a bug that prevented Warp & Blend settings from being retained across
display configuration changes.
* Fixed a bug that prevented some settings changes made via the nvidia-settings
command line interface from being reflected in the nvidia-settings
graphical user interface.
* Changed the clipping behavior of the NVIDIA X driver on Trapezoids and
Triangles for some RENDER operations to match the behavior in newer
versions of Pixman:
* http://lists.freedesktop.org/archives/pixman/2013-April/002755.html
* Fixed a bug in MetaMode tracking that could cause spurious error messages
to be printed when attempting to add or delete Metamodes via NV-CONTROL.
* Fixed a bug that caused the NVIDIA X driver to attempt to load the
X11 "shadow" module unconditionally, even in situations where the driver
had no need to use the module. This could result in the printing of
spurious error messages, on X servers where the module was not present.
* Fixed a bug that prevented display configuration changes made with
xvidtune(1) from working correctly.
* Fixed a bug that occasionally caused display corruption in GLX applications
while changing the display configuration.
* Fixed a bug that prevented glReadPixels from working correctly when reading
from Pixel Buffer Objects over indirect rendering, when the image width is
not a multiple of 4.
* Added a new NV-CONTROL attribute, NV_CTRL_BACKLIGHT_BRIGHTNESS, for
controlling backlight brightness.
* Fixed a bug that prevented nvidia-settings from creating display device
configuration pages for newly connected DisplayPort 1.2 Multi Stream
Transport downstream devices.
* Added GPU utilization reporting to the nvidia-settings control panel.
* Fixed a bug in the nvidia-settings control panel that prevented users from
configuring stereo, when stereo was not already configured.
* Added support for reporting the tachometer-measured fan speed on capable
graphics boards via nvidia-settings and the NV-CONTROL API. The preexisting
mechanism for reporting fan speed reports the speed of the fan as
programmed by the driver.
* For example, `nvidia-settings --query=[fan:0]/GPUCurrentFanSpeedRPM`.
* Fixed a regression that caused GPUs that do not support graphics to not
appear in nvidia-settings.
* Fixed a bug that caused DisplayPort 1.2 multi-stream devices to stop working
if they were unplugged and plugged back in while they were active in the
current MetaMode.
* Added support for multiple NVIDIA kernel modules. This feature allows users
to assign different GPUs in the system to different NVIDIA kernel modules,
potentially reducing the software overhead of coordinating access to multiple GPUs.
* Added support for the EGL API on 32-bit platforms. Currently, the
supported client APIs are OpenGL ES 1.1, 2.0 and 3.0, and the only
supported window system backend is X11.
* Add a new option, AllowEmptyInitialConfiguration, which allows the X server
to start even if no connected display devices are detected at startup.
This option can be enabled by running
"sudo nvidia-xconfig --allow-empty-initial-configuration"
* This option is useful in RandR 1.4 display offload configurations where
no display devices are connected to the NVIDIA GPU when the X server is
started, but might be connected later.
* Updated nvidia-installer to provide a scrollable text area for
displaying messages from the /usr/lib/nvidia/alternate-install-present and
/usr/lib/nvidia/alternate-install-available distro hook files. This allows
for longer messages to be provided in these files.
* Updated nvidia-installer to avoid recursing into the per-kernel "build" and
"source" directories when searching for conflicting kernel modules
in /lib/modules.
* Added a system memory cache to improve the performance of certain
X rendering operations that use software rendering fallbacks. The
X configuration option "SoftwareRenderCacheSize" may be used to configure
the size of the cache.
* Removed the "DynamicTwinView" X configuration option: dynamic
reconfiguration of displays is always possible, and can no longer
be disabled.
* Fixed a bug that caused nvidia-settings to display incorrect information
in its display configuration page when all displays on
an X screen were turned off.
* Updated nvidia-installer to only install the libraries libvdpau and
libvdpau_trace if an existing installation of libvdpau is not detected
on the system. This behavior can be overridden with
the --install-vdpau-wrapper and --no-install-vdpau-wrapper options.
* Future NVIDIA Linux installer packages will no longer include copies of
libvdpau or libvdpau_trace: VDPAU users are recommended to install these
libraries via other means, e.g. from packages provided by their
distributors, or by building them from the sources available
at: http://people.freedesktop.org/~aplattner/vdpau/

-------------------------------------------------------------------
Wed Oct 23 10:20:07 CEST 2013 - bumblebee.obs@gmail.com

- Update to 331.17

* Fixed a bug that prevented configuration files containing application
profiles from being loaded when directories were present in the
application profile configuration search path.
* Deferred initialization of libselinux in the NVIDIA OpenGL driver,
in order to avoid a problem where libselinux might not be ready
when the NVIDIA libGL shared library is first loaded.
* Fixed a bug that could lead to memory exhaustion in OpenGL
applications running on 32-bit systems.
* Added nvidia-uvm.ko, the NVIDIA Unified Memory kernel module,
to the NVIDIA Linux driver package. This kernel module provides
support for the new Unified Memory feature in an upcoming CUDA release.

-------------------------------------------------------------------
Fri Oct 4 22:32:26 CEST 2013 - bumblebee.obs@gmail.com

- Update to 331.13

* Fixed a bug that caused the X server to fail to initialize when
DisplayPort 1.2 monitors were assigned to separate X screens on
the same GPU.
* Fixed a bug that could cause a deadlock when forking from OpenGL programs
which use some malloc implementations, such as TCMalloc.
* Fixed a bug that prevented Warp & Blend settings from being retained
across display configuration changes.
* Fixed a bug that prevented some settings changes made via the
nvidia-settings command line interface from being reflected in the
nvidia-settings graphical user interface.
* Changed the clipping behavior of the NVIDIA X driver on Trapezoids and
Triangles for some RENDER operations to match the behavior in newer
versions of Pixman:

http://lists.freedesktop.org/archives/pixman/2013-April/002755.html

* Fixed a bug in MetaMode tracking that could cause spurious error messages
to be printed when attempting to add or delete Metamodes via NV-CONTROL.
* Fixed a bug that caused the NVIDIA X driver to attempt to load the
X11 "shadow" module unconditionally, even in situations where the driver
had no need to use the module. This could result in the printing of
spurious error messages, on X servers where the module was not present.
* Fixed a bug that prevented display configuration changes made with
xvidtune(1) from working correctly.
* Fixed a bug that occasionally caused display corruption in GLX applications
while changing the display configuration.
* Fixed a bug that prevented glReadPixels from working correctly when
reading from Pixel Buffer Objects over indirect rendering,
when the image width is not a multiple of 4.
* Added a new NV-CONTROL attribute, NV_CTRL_BACKLIGHT_BRIGHTNESS,
for controlling backlight brightness.
* Fixed a bug that prevented nvidia-settings from creating display device
configuration pages for newly connected DisplayPort 1.2 Multi Stream
Transport downstream devices.
* Added GPU utilization reporting to the nvidia-settings control panel.
* Fixed a bug in the nvidia-settings control panel that prevented users
from configuring stereo, when stereo was not already configured.
* Added support for reporting the tachometer-measured fan speed on capable
graphics boards via nvidia-settings and the NV-CONTROL API. The preexisting
mechanism for reporting fan speed reports the speed of the fan as
programmed by the driver.
For example, `nvidia-settings --query=[fan:0]/GPUCurrentFanSpeedRPM`.
* Fixed a regression that caused GPUs that do not support graphics to not
appear in nvidia-settings.
* Fixed a bug that caused DisplayPort 1.2 multi-stream devices to stop
working if they were unplugged and plugged back in while they were
active in the current MetaMode.
* Added support for multiple NVIDIA kernel modules. This feature allows
users to assign different GPUs in the system to different NVIDIA kernel
modules, potentially reducing the software overhead of coordinating
access to multiple GPUs.
* Added support for the EGL API on 32-bit platforms. Currently,
the supported client APIs are OpenGL ES 1.1, 2.0 and 3.0, and the only
supported window system backend is X11.
* Add a new option, AllowEmptyInitialConfiguration, which allows the
X server to start even if no connected display devices are detected
at startup. This option can be enabled by running
"sudo nvidia-xconfig --allow-empty-initial-configuration"

This option is useful in RandR 1.4 display offload configurations where
no display devices are connected to the NVIDIA GPU when the X server is
started, but might be connected later.
Updated nvidia-installer to provide a scrollable text area for displaying
messages from the /usr/lib/nvidia/alternate-install-present and
/usr/lib/nvidia/alternate-install-available distro hook files. This allows
for longer messages to be provided in these files.
Updated nvidia-installer to avoid recursing into the per-kernel "build" and
"source" directories when searching for conflicting kernel modules
in /lib/modules.
Added a system memory cache to improve the performance of certain
X rendering operations that use software rendering fallbacks. The X
configuration option "SoftwareRenderCacheSize" may be used to configure
the size of the cache.
Removed the "DynamicTwinView" X configuration option: dynamic
reconfiguration of displays is always possible, and can no longer be disabled.
Fixed a bug that caused nvidia-settings to display incorrect information
in its display configuration page when all displays on an X screen were
turned off.

* Updated nvidia-installer to only install the libraries libvdpau and
libvdpau_trace if an existing installation of libvdpau is not detected
on the system. This behavior can be overridden with
the --install-vdpau-wrapper and --no-install-vdpau-wrapper options.

Future NVIDIA Linux installer packages will no longer include copies of
libvdpau or libvdpau_trace: VDPAU users are recommended to install
these libraries via other means, e.g. from packages provided by their
distributors, or by building them from the sources available at:
http://people.freedesktop.org/~aplattner/vdpau/

-------------------------------------------------------------------
Sat Jul 20 14:45:02 CET 2013 - bumblebee.obs@gmail.com

- Update to 325.08

* Fixed a bug that could cause display flickering after
setting some scaling configurations.
* Fixed a bug that prevented the status bar on the
"PowerMizer" and "X Server XVideo Settings" pages in the
nvidia-settings control panel from being updated when settings
were changed by another NV-CONTROL client.
* Fixed a bug that could cause some UI elements to be duplicated
in the nvidia-settings control panel following a VT switch on
X server configurations with multiple NVIDIA X screens.
* Changed the default PCIe interrupt delivery method from
virtual-wire to MSI. Note that if the NVIDIA Linux driver fails to
initialize with an error indicating that it is not receiving interrupts,
MSI can be disabled by setting the module parameter "NVreg_EnableMSI=0" when
loading the NVIDIA kernel module.
* Removed support for Linux 2.4 kernels. The NVIDIA Linux driver now
requires Linux 2.6.9 or later.
* Fixed a bug that prevented the creation of a mode via RandR with the same
name as a previously created mode, even after the previous mode had been deleted.
* Fixed a bug in nvidia-settings that caused GTK+ theme colors to be ignored
for some UI elements.
* Fixed a bug that caused nvidia-settings to write hostname-based color
correction settings to the .nvidia-settings-rc configuration file,
even when the "Include X Display Names in the Config File" option was unset.
This could lead to a long delay when starting nvidia-settings, if a hostname
saved to the configuration file failed to resolve.
* Fixed a bug that exposed edge overlap controls on the SLI Mosaic page of
nvidia-settings on edges where overlap was impossible.
* Fixed a bug that caused some settings in the nvidia-settings control panel to
be reset when reprobing displays.
* Fixed a bug that could cause OpenGL applications that use
Frame Buffer Objects (FBOs) to crash following a mode switch
(e.g. changing the resolution of a display or transforming it).
* Fixed a memory leak that could be triggered by unloading libGL before
destroying all GLX contexts.
* Fixed a bug that could cause color correction settings to be applied to
the wrong display when multiple displays are unplugged and then plugged
back in again.
* Fixed a bug that could cause a spurious error message about a missing
NV-GLX extension when performing indirect rendering from a GLX client with
the NVIDIA client-side OpenGL libraries to a non-NVIDIA GLX server.
* Fixed an OpenGL bug that prevented conditional rendering from the
NV_conditional_render extension from correctly affecting CopyPixels.
* Improved the rendering performance of complex gradients.
* Added support for configuring SLI Mosaic and Base Mosaic in the
"X Server Display Configuration" page of nvidia-settings.
* Updated nvidia-installer to look for the following files:

/usr/lib/nvidia/alternate-install-available
/usr/lib/nvidia/alternate-install-present

* These files may be provided by NVIDIA driver installers other than the
official .run package maintained by NVIDIA, to alert nvidia-installer
to the presence or availability of an alternative installation method.
See the nvidia-installer(1) manual page for more information.
* Fixed an X driver bug where the RandR CRTC panning area and tracking area
were not getting clamped to the current X screen size when the RandR CRTC
transitioned from disabled to enabled.
* Fixed an X driver bug where successful RandR X_RRSetScreenConfig requests
would update the server's RandR 'lastSetTime' too far, potentially causing
subsequent RandR requests to be unnecessarily rejected.
* Fixed an X driver bug that caused GPUs to become inaccessible via the
NV-CONTROL X extension when no corresponding X screens could be initialized.
* Generate a BadMatch error when applications attempt to create GLX pixmaps
using glXCreatePixmap() or glXCreateGLXPixmapWithConfigSGIX() and the pixmap's
depth doesn't match that of the specified GLXFBConfig.
* Updated nvidia-settings to explicitly specify the direction of rotation for
configuring per-display rotation configuration.
* Honor a GPU UUID as the GPU qualifier for X configuration options that allow
GPU qualifiers (e.g. "MetaModes").
* Report GPU UUIDs in the X log when verbose logging is enabled in the X server.
* Enabled conformant glBlitFrameBuffer() scissor test behavior by default.
A driver-provided application profile enables the previous non-conformant
behavior for applications that load libcogl, to work around a bug in older
versions of libcogl.
* Application profiles can be added to enable the non-conformant behavior
for other applications that depend upon it. See the "Known Issues" section of
the README for more details.
* Fixed a bug that caused the X server to crash when querying the current mode
of disabled displays.

-------------------------------------------------------------------
Sat Jul 20 14:32:54 CET 2013 - bumblebee.obs@gmail.com

- Update to 319.32

* Added support for the following GPU:

GeForce GTX 760
GeForce 720M

* Updated the nvidia-settings control panel to report more
detailed locking information.
* Fixed a bug that could cause the X server to crash after power-cycling
displays connected behind a DisplayPort 1.2 Multi-Stream Transport hub.
* Fixed a bug that could cause nvidia-settings to crash when switching
VTs after changing some settings.
* Updated the application profile syntax to allow for multiple patterns
within a single rule. See the README for details.
* Fixed a bug that caused OpenGL programs to crash when the
__GL_DOOM3 environment variable was set.
* Updated the NVIDIA driver to avoid calling fork(2) to execute the
nvidia-modprobe utility when not needed.
* Improved the error reporting of the nvidia-persistenced utility.
* Fixed a bug that could cause Altair HyperView to hang when rendering
animations with tensors.
* Fixed a performance regression in MEDINA 8.2.
* Fixed a bug that caused the OpenGL driver to hang sometimes when running
the SpeedTree Modeler application.
* Fixed a bug that could cause an OpenGL application to crash if it creates
and destroys multiple threads.
* Fixed a bug in nvidia-installer that could cause installation problems
when the value of the CC environment variable contained spaces,
e.g. CC="distcc gcc"
* Fixed a bug that caused corrupted window content in some cases when
moving GLX windows with antialiasing enabled.
* Fixed a bug that caused DisplayPort devices that failed link training
to be reported as connected rather than disconnected.
* Fixed a regression that could cause a DisplayPort device that was connected
to one connector to turn off when a DisplayPort device on a different
connector was connected or disconnected.
* On Kepler-based GPUs, improved the appearance of the tearing that occurs
when using RandR 1.4's Source Output capability.While tearing is still
expected, the tears should now appear as horizontal lines rather than
more noticeable checkerboard or triangular shapes.
* Added a "Prefer Consistent Performance" PowerMizer Mode to the
nvidia-settings control panel, available on Quadro boards that support
this feature.

-------------------------------------------------------------------
Fri May 31 10:47:12 CET 2013 - bumblebee.obs@gmail.com

- Update to 319.23

* Added support for the following GPUs:
GeForce GTX 780
* Fixed a regression that could cause X to crash when querying GPU information
through NV-CONTROL on multi-GPU systems where some GPUs failed to be
initialized for X.
* Fixed a bug that could cause X to crash when using Vertex Buffer Objects (VBOs)
with indirect rendering.
* Fixed a bug that prevented some drop-down menus in nvidia-settings from
working correctly when using older versions of GTK+.
* Fixed RandR panning reporting when the current MetaMode is smaller than
the X screen.
* Fixed a regression that caused nvidia-installer to attempt post-processing of
non-installed files.
* Added the "ForceCompositionPipeline" and "ForceFullCompositionPipeline" MetaMode
options. See the README for details.
* Added support for HDMI 4K resolutions. Using a 4K resolution with an HDMI display
requires a Kepler or later GPU.
* Added support in VDPAU for 4k resolution MPEG-1/2 and H.264 video decoding,
up to 4032x4048 for MPEG-1/2 and 4032x4080 for H.264, and up to 65536 macroblocks for both.

-------------------------------------------------------------------
Fri May 10 18:06:12 CET 2013 - bumblebee.obs@gmail.com

- Update to 319.17

* Added support for the following GPU:

GeForce GTX 650 Ti BOOST
GeForce GT 720M
GeForce GT 735M
GeForce GT 740M
GeForce GT 745M
GeForce GT 750M

* Fixed a regression that caused multiple BUG messages to be printed in
the kernel log on SMP systems.
* Fixed a bug that could cause the X server to crash when repeatedly
enabling and disabling displays.
* Updated nvidia-settings to preserve the relative positioning of displays when
changing from a layout where multiple displays are on the same X screen to
one where the same displays span multiple X screens.
* Fixed nvidia-settings to dlopen(3) "libvdpau.so.1", rather than "libvdpau.so".
* Added nvidia-persistenced, a daemon utility, to the driver package.
nvidia-persistenced can be installed to run on system startup or manually
run to allow the NVIDIA kernel module to keep persistent driver state allocated
when no other user-space NVIDIA driver components are running. This can improve
startup time for other user-space NVIDIA driver components.
* Fixed CVE-2013-0131: NVIDIA UNIX GPU Driver ARGB Cursor Buffer Overflow in
"NoScanout" Mode. This buffer overflow, which occurred when an X client
installed a large ARGB cursor on an X server running in NoScanout mode,
could cause a denial of service (e.g., an X server segmentation fault),
or could be exploited to achieve arbitrary code execution.

* For more details, see: http://nvidia.custhelp.com/app/answers/detail/a_id/3290

* Added initial support for restoration of efifb consoles on UEFI systems where
the primary display is driven over VGA or TMDS (e.g. DVI, HDMI, or LVDS).
* Added support for the xorg.conf Monitor section options "Ignore", "Enable",
"Primary", and "Rotate".For example, to rotate a monitor identified by
a specific EDID hash, one could add the following to /etc/X11/xorg.conf or
a file in /etc/X11/xorg.conf.d:

Section "Monitor"
Identifier "DPY-EDID-ee6cecc0-fa46-0c33-94e0-274313f9e7eb"
Option "Rotate" "left"
EndSection

See the README and the xorg.conf(5) man page for more information.

* Added an Underscan feature in the nvidia-settings X Server Display
Configuration page which allows the configuration of an underscan border
around the ViewPortOut.This feature was formerly known as Overscan Compensation.
* Added support for application profiles to the NVIDIA client-side GLX
implementation. See the "Application Profiles" chapter of
the README for more information.
* Added support to nvidia-installer for crytographically signing the NVIDIA
kernel module. See the "Installing the NVIDIA Driver" chapter of
the README for more information.
* Added the "PanningTrackingArea" and "PanningBorder" MetaMode attributes.
* Added support for RandR 1.3 panning.
* Improved performance when the Accel option is disabled.
* Added initial support for RandR 1.4 Provider objects with the Source Output
capability, which can be used to render the desktop on an NVIDIA GPU and
display it on an output connected to a provider with the Sink Output
capability, such as an Intel integrated graphics device or a
DisplayLink USB-to-VGA adapter.See the README for details.
* Added nvidia-modprobe, a setuid root utility, to the driver package.
nvidia-modprobe can be used by user-space NVIDIA driver components to
make sure the NVIDIA kernel module is loaded and that the NVIDIA character
device files are present.When possible, it is recommended to use Linux
distribution native mechanisms for managing kernel module loading and
device file creation. This utility is provided as a fallback to work
out-of-the-box in a distribution-independent way.
* Updated the nvidia-settings command line interface to accept display
device names, as well as optional target qualifiers, e.g.

nvidia-settings -q [DVI-I-0]/RefreshRate
nvidia-settings -q [GPU-1.DVI_I-1]/RefreshRate

* Updated the nvidia-settings command line interface to no longer assume
the "X screen 0" target, when no target is specified in query and assign
operations.Instead, all valid targets of the attribute are processed.
* Fixed a memory leak that occurred when destroying a GLX window but
not its associated X window.
* Fixed a bug that could cause nvidia-installer to fail to delete directories
created as part of a previous installation.
* Updated nvidia-installer to report failures to remove installed files or
restore backed up files with a single warning message, instead of a separate
message for each individual failure.
* Improved the performance of modesets in cases where the mode timings remained
the same, but other parameters of the mode configuration, such as the
ViewPort or panning domain, changed.
* Fixed an issue with RENDER convolution filters.The driver will no longer
normalize filter kernels before accelerating them.
* Improved debuggability of the NVIDIA OpenGL libraries by including proper
stack unwinding information on all supported architectures.
* Updated the dkms.conf file and the makefile for the NVIDIA Linux kernel
module to allow DKMS installations on systems with separate source and
output directories.
* Fixed a bug that caused RENDER Pictures to be sampled incorrectly when
using nearest filtering in some cases.
* Added support for the RandR "Border" and "BorderDimensions" Output
properties, which can be used to configure the ViewPortOut of an RandR output.
This is functionally equivalent to the "ViewPortOut" MetaMode token.
* Fixed a bug where RRGetCrtcInfo could report incorrect size information
when an RandR output has a custom ViewPortIn.
* Further improve performance of some versions of HyperMesh with Quadro GPUs.
* Added a VDPAU page to the nvidia-settings control panel, to display
information about the decoding capabilities of VDPAU-capable GPUs.
* Added support for dynamic mode management through RandR, e.g. via
the --newmode, --rmmode, and --delmode options in xrandr(1).
* Increased the number of pages that are shareable across multiple processes
in the x86 build of libnvidia-glcore.so, by reducing its R_386_PC32
relocation count.
* Fixed a bug that caused XVideo applications to receive BadAlloc errors
after VT switches and mode switches that occurred while a composite
manager was running.
* Removed the X driver's support for "CursorShadow".
* Updated nvidia-installer to attempt unprelinking files whose checksums
do not match the checksums recorded at installation time.
* Switched .run package compression from gzip to xz.This provides
a higher level of compression.

-------------------------------------------------------------------
Wed Apr 10 14:34:29 CET 2013 - bumblebee.obs@gmail.com

- Update to 319.12

* Added support for the following GPU:

GeForce GTX 650 Ti BOOST

* Fixed CVE-2013-0131: NVIDIA UNIX GPU Driver ARGB Cursor Buffer Overflow in
"NoScanout" Mode. This buffer overflow, which occurred when an X client
installed a large ARGB cursor on an X server running in NoScanout mode,
could cause a denial of service (e.g., an X server segmentation fault),
or could be exploited to achieve arbitrary code execution.

For more details, see: http://nvidia.custhelp.com/app/answers/detail/a_id/3290

* Added initial support for restoration of efifb consoles on UEFI systems where
the primary display is driven over VGA or TMDS (e.g. DVI, HDMI, or LVDS).
* Added support for the xorg.conf Monitor section options "Ignore", "Enable",
"Primary", and "Rotate". For example, to rotate a monitor identified by a specific
EDID hash, one could add the following to /etc/X11/xorg.conf or a file
in /etc/X11/xorg.conf.d:

Section "Monitor"
Identifier "DPY-EDID-ee6cecc0-fa46-0c33-94e0-274313f9e7eb"
Option "Rotate" "left"
EndSection

See the README and the xorg.conf(5) man page for more information.

* Added an Underscan feature in the nvidia-settings X Server Display Configuration page
which allows the configuration of an underscan border around the ViewPortOut.
This feature was formerly known as Overscan Compensation.
* Added support for application profiles to the NVIDIA client-side GLX implementation.
See the "Application Profiles" chapter of the README for more information.
* Added support to nvidia-installer for crytographically signing the NVIDIA kernel module.
See the "Installing the NVIDIA Driver" chapter of the README for more information.
* Added the "PanningTrackingArea" and "PanningBorder" MetaMode attributes.
* Added support for RandR 1.3 panning.
* Improved performance when the Accel option is disabled.
* Added initial support for RandR 1.4 Provider objects with the Source Output capability,
which can be used to render the desktop on an NVIDIA GPU and display it on an output
connected to a provider with the Sink Output capability, such as an Intel integrated
graphics device or a DisplayLink USB-to-VGA adapter.See the README for details.
* Added nvidia-modprobe, a setuid root utility, to the driver package. nvidia-modprobe can be
used by user-space NVIDIA driver components to make sure the NVIDIA kernel module is
loaded and that the NVIDIA character device files are present.When possible, it is
recommended to use Linux distribution native mechanisms for managing kernel module loading and
device file creation. This utility is provided as a fallback to work out-of-the-box in
a distribution-independent way.
* Updated the nvidia-settings command line interface to accept display device names,
as well as optional target qualifiers, e.g.

nvidia-settings -q [DVI-I-0]/RefreshRate
nvidia-settings -q [GPU-1.DVI_I-1]/RefreshRate

* Updated the nvidia-settings command line interface to no longer assume the "X screen 0" target,
when no target is specified in query and assign operations.Instead, all valid targets of
the attribute are processed.
* Fixed a memory leak that occurred when destroying a GLX window but not its associated X window.
* Fixed a bug that could cause nvidia-installer to fail to delete directories created as
part of a previous installation.
* Updated nvidia-installer to report failures to remove installed files or restore backed up files
with a single warning message, instead of a separate message for each individual failure.
* Improved the performance of modesets in cases where the mode timings remained the same,
but other parameters of the modeconfiguration, such as the ViewPort or panning domain, changed.
* Fixed an issue with RENDER convolution filters.The driver will no longer normalize filter
kernels before accelerating them.
* Improved debuggability of the NVIDIA OpenGL libraries by including proper stack unwinding
information on all supported architectures.
* Updated the dkms.conf file and the makefile for the NVIDIA Linux kernel module to allow DKMS
installations on systems with separate source and output directories.
* Fixed a bug that caused RENDER Pictures to be sampled incorrectly when using nearest filtering
in some cases.
* Added support for the RandR "Border" and "BorderDimensions" Output properties,
which can be used to configure the ViewPortOut of an RandR output.This is functionally
equivalent to the "ViewPortOut" MetaMode token.
* Fixed a bug where RRGetCrtcInfo could report incorrect size information when an RandR output
has a custom ViewPortIn.
* Further improve performance of some versions of HyperMesh with Quadro GPUs.
* Added a VDPAU page to the nvidia-settings control panel, to display information about the
decoding capabilities of VDPAU-capable GPUs.
* Added support for dynamic mode management through RandR, e.g. via the --newmode, --rmmode,
and --delmode options in xrandr(1).
* Increased the number of pages that are shareable across multiple processes in the x86 build of
libnvidia-glcore.so, by reducing its R_386_PC32 relocation count.
* Fixed a bug that caused XVideo applications to receive BadAlloc errors after VT switches and
mode switches that occurred while a composite manager was running.
* Removed the X driver's support for "CursorShadow".
* Updated nvidia-installer to attempt unprelinking files whose checksums do not match the
checksums recorded at installation time.
* Switched .run package compression from gzip to xz.This provides a higher level of compression.

-------------------------------------------------------------------
Wed Apr 10 14:34:29 CET 2013 - bumblebee.obs@gmail.com

- Update to 310.44

For more details, see: http://nvidia.custhelp.com/app/answers/detail/a_id/3290

-------------------------------------------------------------------
Mon Mar 11 13:37:01 CET 2013 - bumblebee.obs@gmail.com

- Update to 310.40

* Added support for the following GPUs:

Quadro K4000
Quadro K2000
Quadro K2000D
Quadro K600
GeForce G205M
GeForce GT 240M LE
GeForce 405M
GeForce 610
GeForce 615
GeForce 620M
GeForce GT 625M
GeForce GT 625 (OEM)
GeForce GT 635
GeForce 705M
GeForce 710M
GeForce GT 710M
GeForce GT 720A
GeForce GT 730M
Tesla X2070
Tesla S2050
Tesla K20s
* Reduced the amount of time needed to establish framelock in some stereo
configurations with many monitors.
* Fixed a bug where glXSwapIntervalEXT failed to set a swap interval value of zero
in certain situations.

-------------------------------------------------------------------
Mon Jan 21 15:36:55 CET 2013 - bumblebee.obs@gmail.com

- Update to 310.32

* Added support for the following GPUs:
GeForce GTX 680MX
Tesla K20Xm
* Fixed a bug when enabling framelock between displays connected to the same GPU
as other displays with different refresh rates, which caused the latter to be
incorrectly assigned to the framelock group.
* Updated the reporting of HDMI 3D framerates and pixel clocks to be more consistent
with how they are reported by HDMI 3D displays.
* Fixed a bug that sometimes prevented rotation controls in the nvidia-settings
control panel from working after changing resolutions.
* Fixed a bug that could cause applications using GL_NV_vdpau_interop to crash
during modeswitches.
* Fixed a regression that could cause OpenGL applications to crash while compiling
shaders.
* Added a kernel module parameter, "NVreg_EnablePCIeGen3", which can be used to
enable PCIe gen 3 when possible. Note that on many systems where the NVIDIA driver
does not allow PCIe gen 3 by default, stability problems can be expected when this
option is enabled: users should do so at their own risk.
* Fixed a VDPAU bug that could cause the X server to hang when decoding some corrupted
video streams.
* Renamed VGX products to GRID products in the "Supported NVIDIA GPU Products" list.
* Added support for X.org xserver ABI 14 (xorg-server 1.14).
* Fixed a bug in nvidia-settings that could cause the wrong resolution to be set in
basic mode for setups based on one display per X screen.
* Fixed libnvidia-encode.so library dependency by linking it with libnvcuvid.so.1 instead
of libnvcuvid.so while creating it.
* Improved performance of OpenGL framebuffer object binds with Xinerama enabled
by 2000-3000% when the application's windows do not span screen boundaries.
* Fix performance issues when using some versions of HyperMesh with Quadro GPUs.

-------------------------------------------------------------------
Sat Dec 22 14:18:11 CET 2012 - bumblebee-project@hotmail.com

- Update to 313.09

* Updated the NVIDIA X driver to reprobe displays when VT-switching to X, to allow
reporting of hotplug events when displays are connected or disconnected while
VT-switched away from X.
* Added unofficial GLX protocol support (i.e for GLX indirect rendering) for the following
extension and core commands.

ARB_vertex_array_object
OpenGL 3.0 commands ClearBufferfi, ClearBufferfv, ClearBufferiv, ClearBufferuiv and
GetStringi.

* Fixed a bug that caused the cursor shadow to be clipped to 32x32 pixels, even on
Kepler GPUs that support a 256x256 cursor image.
* Fixed a bug that prevented some cursor image updates from taking effect on displays with
rotation or other transformations applied.
* Fixed cursor alpha blending artifacts on displays with rotation or other
transformations applied.
* Added support for the GLX_EXT_buffer_age extension.
* Improved the performance of glDrawPixels() by up to 450% when the pixel data is of
type GL_BYTE.
* Fixed libnvidia-encode.so library dependency by linking it with libnvcuvid.so.1 instead of
libnvcuvid.so while creating it.
* Improved performance of OpenGL framebuffer object binds with Xinerama enabled by
2000-3000% when the application's windows do not span screen boundaries.
* Fix performance issues when using some versions of HyperMesh with Quadro GPUs.

-------------------------------------------------------------------
Thu Nov 29 09:54:22 CET 2012 - bumblebee-project@hotmail.com

- Update to 310.19

* Added support for OpenGL 4.3.
* Added a new X configuration option, "UseHotplugEvents", to allow the suppression of
RandR events when adding or removing non-DisplayPort displays. See the "X Config Options"
appendix of the README for details.
* Added support for configuring stereo in nvidia-settings when stereo is enabled in
the X configuration file.
* Added support for configuring the ViewPortIn and ViewPortOut for display devices in
nvidia-settings.
* Fixed metamode bookkeeping when modifying the display configuration in
the "X Server Display Configuration" page of nvidia-settings.
* Added support for configuring rotation and reflection per display device in
nvidia-settings.
* Implemented workarounds for two Adobe Flash bugs by applying libvdpau
commit ca9e637c61e80145f0625a590c91429db67d0a40 to the version of libvdpau shipped with
the NVIDIA driver.
* Fixed an issue which affected the performance of moving windows of VDPAU applications when
run in some composite managers.
* Added unofficial GLX protocol support (i.e., for GLX indirect rendering) for
the GL_ARB_pixel_buffer_object OpenGL extension.
* Added support for HDMI 3D Stereo with Quadro Kepler and later GPUs. See the documentation for
the "Stereo" X configuration option in the README for details.
* Added experimental support for OpenGL threaded optimizations, available through
the __GL_THREADED_OPTIMIZATIONS environment variable. For more information, please refer to
the "Threaded Optimizations" section in chapter "Specifying OpenGL Environment Variable Settings"
of the README.
* Improved performance and responsiveness of windowed OpenGL applications running inside
a Unity session.

-------------------------------------------------------------------
Tue Oct 16 13:58:37 CET 2012 - bumblebee-project@hotmail.com

- Update to 310.14

* Implemented workarounds for two Adobe Flash bugs by applying libvdpau
commit ca9e637c61e80145f0625a590c91429db67d0a40 to the version of libvdpau shipped
with the NVIDIA driver.
* Fixed an issue which affected the performance of moving windows of VDPAU applications
when run in some composite managers.
* Added unofficial GLX protocol support (i.e., for GLX indirect rendering) for
the GL_ARB_pixel_buffer_object OpenGL extension.
* Added support for HDMI 3D Stereo with Quadro Kepler and later GPUs. See the documentation
for the "Stereo" X configuration option in the README for details.
* Added experimental support for OpenGL threaded optimizations, available through
the __GL_THREADED_OPTIMIZATIONS environment variable. For more information, please refer to
the "Threaded Optimizations" section in chapter "Specifying OpenGL Environment Variable
Settings" of the README.
* Improved performance and responsiveness of windowed OpenGL applications running
inside a Unity session.
* Added support for OpenGL 4.3.
* Added support for the "Backlight" RandR output property for configuring the brightness of
some notebook internal panels.
* Fixed a bug that prevented the Ubuntu Unity launcher panel from unhiding:
https://bugs.launchpad.net/unity/+bug/1057000
* Fixed a bug that caused nvidia-installer to sometimes attempt to write a log file in
a nonexistent directory.
* Fixed a bug that caused incorrect input transformation after resizing an NVIDIA X screen with
xserver ABI 12 (xorg-server 1.12) or newer.
* Fixed a bug that caused GLX to leak memory when Xinerama is enabled.

-------------------------------------------------------------------
Mon Sep 24 13:17:24 CET 2012 - bumblebee-project@hotmail.com

- Update to 304.51

* Added support for the new Quadro Sync board for Quadro Kepler GPUs. See the
"Configuring Frame Lock and Genlock" chapter in the README for details.
* Fixed an X server crash on X.Org xserver 1.13 when it is compiled without support for DRI2.
* Fixed a regression that broke color controls on older X servers.
* Fixed a bug that sometimes caused the display layout area of the nvidia-settings
control panel to be laid out incorrectly.
* Fixed a bug that prevented panning from working correctly after a modeswitch on some
X servers with support for cursor constraining.
* Gamma ramp and colormap adjustments now apply correctly when screen transformations such as
rotation and keystone correction are in use.
* Fixed RandR per-CRTC gamma persistence across modeswitches and VT-switches.
* Fixed a bug that caused the X server to sometimes hang in response to input events.
* Fixed a reduction in rendering performance for core X11 rendering on certain GPUs that
occurred in the 290.series of releases.
* Fixed a bug that prevented PowerMizer from working correctly on some boards with GDDR5 memory,
such as some GeForce GT 240 SKUs.
* Fixed a bug that caused OpenGL applications to not animate properly when a rotation or
a transformation was applied on some older X server versions.
* Enabled FXAA with Unified Back Buffers.
* Fixed a bug that prevented the "Reset Hardware Defaults" button in the Display Settings page of
nvidia-settings from being activated.

-------------------------------------------------------------------
Tue Aug 28 09:27:51 CET 2012 - bumblebee-project@hotmail.com

- Update to 304.43

* Added support for the following GPUs:
GeForce GTX 660 Ti
Quadro K5000
Quadro K5000M
Quadro K4000M
Quadro K3000M
NVS 510
* Fixed a bug that caused pre-release versions of X.Org xserver 1.13 to crash when certain
GLX operations were performed, such as when starting Firefox.
* Fixed a bug that caused VDPAU to hang when expanding the YouTube Flash Player.
* Fixed a bug that caused gnome-settings-daemon to revert display configuration changes
made by nvidia-settings.
* Updated nvidia-settings to use RandR per-CRTC gamma control, when available. When
controlling an X server with support for RandR 1.2, nvidia-settings will display the color
correction widget as a tab within each display device page, instead of a per-X screen color
correction page.
* Fixed a bug that prevented the display palette from being updated immediately after
an application called XStoreColors.
* Added the ability to select and move X screens in the "X Server Display Configuration" page of
nvidia-settings via Ctrl-(Left)Click + Drag.

-------------------------------------------------------------------
Tue Aug 14 14:46:41 CET 2012 - bumblebee-project@hotmail.com

- Update to 304.37

* Added support for the following GPUs:

GeForce GTX 680M
Quadro K1000M
Quadro K2000M
Tesla K10

* Removed the ability to enable SLI on GPUs with ECC enabled.
* Fixed several bugs that prevented some RandR transform geometries from being applied.
* Fixed a bug that caused frequent hangs or crashes on some systems.
* Fixed a bug that would cause corruption and performance issues in certain OpenGL applications
such as Amnesia: The Dark Descent on GeForce 6 and 7 GPUs.
* Fixed a bug that caused applications that use DirectColor visuals, such as
Enemy Territory: Quake Wars and Braid, to appear in shades of blue instead of
the correct colors.
* Modified handling of RRSetScreenSize requests to ignore requests that do not actually resize
the screen.This reduces screen flicker in certain cases when using GNOME.
* Added a new option, "--disable-nouveau" to nvidia-installer. This option changes the action
that is chosen by default when Nouveauis detected by nvidia-installer. If
the "--disable-nouveau" optionis set, then the default will be to attempt to disable Nouveau
when it is detected; otherwise, no attempt will be made unless requested.
* Added support for xserver ABI 13 (xorg-server 1.13).
* Added support for RandR per-CRTC gamma manipulation through the RandR 1.2 RRGetCrtcGammaSize,
RRGetCrtcGamma, and RRSetCrtcGamma requests.
* Fixed a bug that caused RRSetOutputPrimary requests to incorrectly generate BadValue errors
when setting the primary output to None.This caused gnome-settings-daemon to crash after
changing the screen configuration in response to a display hotplug or the display change
hot-key being pressed.
* Fixed a problem where RENDER Glyphs operations would exhibit severe performance issues in
certain cases, such as when used with gradients by Cairo and Chromium.
* Fixed a bug that caused X to hang when resuming certain DisplayPort display devices (such as
Apple brand mini-DisplayPort to dual-link DVI adapters) from power-saving mode.
* Fixed a bug that caused an X screen to be extended to Quadro SDI Output devices by default.
An X screen will still use an SDI Output device if it is the only display device available.
To use a SDI Output device on an X screen with other display devices available, include
the SDI Output device with either the "UseDisplayDevice" or "MetaMode" X configuration options.
* Updated X11 modeline validation such that modes not defined in a display device's EDID are
discarded if the EDID 1.3 "GTF Supported" flag is unset or if
the EDID 1.4 "Continuous Frequency" flag is unset. The new "AllowNonEdidModes" token for
the ModeValidationX configuration option can be used to disable this new check.
* Fixed a bug, introduced in the 295.xx release series, with EDID detection on some laptop
internal panels. This bug caused the laptop internal panel to show six small copies of
the desktop.
* Added support for FXAA, Fast Approximate Anti-Aliasing. Using regular anti-aliasing modes or
Unified Back Buffers with FXAA is not currently supported.
* Enhanced the functionality of the IncludeImplicitMetaModes X configuration option:
Implicit MetaModes will be added for the primary display device, even if multiple display
devices are in use when X is initialized.

Implicit MetaModes will be added for common resolutions, even
if there isn't a mode with that resolution in the mode pool of
the display device.

Extended the syntax of the IncludeImplicitMetaModes X
configuration option, e.g., to control which display device is
used for creation of implicit MetaModes.

See the description of the IncludeImplicitMetaModes X configuration
option in the README for details.

* Modified the handling of the RandR 1.0/1.1 requests RRGetScreenInfo and RRSetScreenConfig
(e.g., `xrandr -q --q1` and `xrandr --size ...` and `xrandr --orientation ...`) such that
they operate on MetaModes. This was the behavior in NVIDIA X driver versions 295.xx and
earlier, but 302.xx releases altered the handling of these RandR 1.0/1.1 requests to
operate on a single RandR output's modes.
* With the above changes to IncludeImplicitMetaModes and RandR 1.0/1.1 handling, fullscreen
applications (e.g., SDL-based applications, Wine), should have more resolutions available
to them, and should interact better with multiple monitor configurations.
* Fixed a bug that could cause G8x, G9x, and GT2xx GPUs to display a black screen or corruption
after waking up from suspend.
* Fixed several bugs that could cause some OpenGL programs to hang when calling fork(3).
* Fixed an nvidia-settings bug that caused the results of ProbeDisplays queries made with
the --display-device-string option to be formatted incorrectly.
* Improved the responsiveness of updates to the nvidia-settings control panel when displays
are hotplugged.
* Fixed a bug that caused display corruption when setting some transforms, especially when
panning a transformed display.
* Fixed a bug that caused extra RandR events to be generated the first time a display is
hotplugged.
* Fixed a bug that caused X11 modelines with '@' in their names to be rejected.
* Added support for DisplayPort 1.2 branch devices, which allow multiple displays to be
connected to a single DisplayPort connector on a graphics board.
* Fixed a bug that caused most OpenGL texture uploads to be slow when the context was
bound rendering to an RGB overlay drawable.
* Fixed a bug that caused audio over HDMI to not work after restarting the X server on
some MCP7x (IGP) GPUs.
* Updated the X configuration option "UseDisplayDevice" to honor the value "none" on any GPU.
* Added support for DKMS in nvidia-installer. Installing the kernel module through DKMS
allows the module to be rebuilt automatically when changing to a different Linux kernel.
See the README and the nvidia-installer help text for the "--dkms" option.
* Added RandR output properties _ConnectorLocation, ConnectorNumber, ConnectorType, EDID,
_GUID, and SignalFormat. See the README for details on these properties.
* Extended support for Base Mosaic to all G80+ SLI configurations with up to three displays.
* Fixed a bug that caused some monitors to fail to wake from DPMS suspend mode when
multiple DisplayPort monitors were attached to one GPU.
* Removed controls for XVideo attributes from the "X Server XVideo Settings" page of
the nvidia-settings control panel. XVideo attributes can be configured in XVideo player
applications, or through utilities such as xvattr.
* Fixed a bug that caused all ports on an XVideo adaptor to share color correction settings.
* Removed support for the following X configuration options:

SecondMonitorHorizSync
SecondMonitorVertRefresh

Similar control is available through the NVIDIA HorizSync and
VertRefresh X configuration options. Please see the NVIDIA driver
README for details.

* Fixed a bug that prevented NVIDIA 3D Vision Pro from working properly when switching
between X servers on different VTs.
* Added support for desktop panning when rotation, reflection, or transformation is applied
to a display device (either through RandR or through the MetaMode syntax); panning would
previously be ignored in that case.
* Implemented hotfix for a privilege escalation vulnerability reported on August 1, 2012.
For more details, see: http://nvidia.custhelp.com/app/answers/detail/a_id/3140

-------------------------------------------------------------------
Tue Aug 7 10:43:26 CET 2012 - bumblebee-project@hotmail.com

- Update to 304.32

* Implemented hotfix for a privilege escalation vulnerability reported on August 1, 2012.
For more details, see: http://nvidia.custhelp.com/app/answers/detail/a_id/3140
* Fixed a bug that caused applications that use Direct Color visuals, such as
Enemy Territory: Quake Wars and Braid, to appear in shades of blue instead of
the correct colors.
* Modified handling of RRSetScreenSize requests to ignore requests that do not actually resize
the screen. This reduces screen flicker in certain cases when using GNOME.
* Added a new option, "--disable-nouveau" to nvidia-installer. This option changes the action
that is chosen by default when Nouveau is detected by nvidia-installer. If
the "--disable-nouveau" optionis set, then the default will be to attempt to disable Nouveau
when it is detected; otherwise, no attempt will be made unless requested.

-------------------------------------------------------------------
Thu Aug 2 11:34:07 CET 2012 - bumblebee-project@hotmail.com

- Update to 304.30

* Added support for the following GPU:
Tesla K10
* Added support for RandR per-CRTC gamma manipulation through the
RandR 1.2 RRGetCrtcGammaSize, RRGetCrtcGamma, and RRSetCrtcGamma requests.
* Fixed a bug that caused RRSetOutputPrimary requests to incorrectly generate BadValue
errors when setting the primary output to None. This caused gnome-settings-daemon to
crash after changing the screen configuration in response to a display hotplug or the
display change hot-key being pressed.
* Fixed a problem where RENDER Glyphs operations would exhibit severe performance issues
in certain cases, such as when used with gradients by Cairo and Chromium.
* Fixed a bug that caused X to hang when resuming certain DisplayPort display devices
(such as Apple brand mini-DisplayPort to dual-link DVI adapters) from power-saving mode.
* Fixed a bug that caused an X screen to be extended to Quadro SDI Output devices by default.
An X screen will still use an SDI Output device if it is the only display device available.
To use a SDI Output device on an X screen with other display devices available, include the
SDI Output device with either the "UseDisplayDevice" or "MetaMode" X configuration options.
* Updated X11 modeline validation such that modes not defined in a display device's EDID are
discarded if the EDID 1.3 "GTF Supported" flag is unset or if the EDID 1.4 "Continuous Frequency"
flag is unset. The new "AllowNonEdidModes" token for the ModeValidation X configuration option
can be used to disable this new check.
* Fixed a bug, introduced in the 295.xx release series, with EDID detection on some laptop
internal panels. This bug caused the laptop internal panel to show six small copies of
the desktop.
* Added support for FXAA, Fast Approximate Anti-Aliasing.

-------------------------------------------------------------------
Thu Aug 2 11:15:47 CET 2012 - bumblebee-project@hotmail.com

- Update to 304.22

* Added support for the following GPUs:
GeForce GTX 680M
Quadro K1000M
Quadro K2000M
* Enhanced the functionality of the IncludeImplicitMetaModes X configuration option:
Implicit MetaModes will be added for the primary display device, even if multiple
display devices are in use when X is initialized.
Implicit MetaModes will be added for common resolutions, even if there isn't a mode
with that resolution in the mode pool of the display device.
Extended the syntax of the IncludeImplicitMetaModes X configuration option,
e.g., to control which display device is used for creation of implicit MetaModes.
See the description of the IncludeImplicitMetaModes X configuration option in the README
for details.
* Modified the handling of the RandR 1.0/1.1 requests RRGetScreenInfo and RRSetScreenConfig
(e.g., `xrandr -q --q1` and `xrandr --size ...` and `xrandr --orientation ...`) such that
they operate on MetaModes. This was the behavior in NVIDIA X driver versions 295.xx and
earlier, but 302.xx releases altered the handling of these RandR 1.0/1.1 requests to
operate on a single RandR output's modes.
* With the above changes to IncludeImplicitMetaModes and RandR 1.0/1.1 handling, fullscreen
applications (e.g., SDL-based applications, Wine), should have more resolutions available
to them, and should interact better with multiple monitor configurations.
* Fixed a bug that could cause G8x, G9x, and GT2xx GPUs to display a black screen or
corruption after waking up from suspend.
* Fixed several bugs that could cause some OpenGL programs to hang when calling fork(3).
* Fixed an nvidia-settings bug that caused the results of ProbeDisplays queries made with
the --display-device-string option to be formatted incorrectly.
* Improved the responsiveness of updates to the nvidia-settings control panel when displays
are hotplugged.
* Fixed a bug that caused display corruption when setting some transforms, especially when
panning a transformed display.
* Fixed a bug that caused extra RandR events to be generated the first time a display is
hotplugged.
* Fixed a bug that caused X11 modelines with '@' in their names to be rejected.
* Added support for DisplayPort 1.2 branch devices, which allow multiple displays to be
connected to a single DisplayPort connector on a graphics board.
* Fixed a bug that caused most OpenGL texture uploads to be slow when the context was bound
rendering to an RGB overlay drawable.
* Fixed a bug that caused audio over HDMI to not work after restarting the X server on some
MCP7x (IGP) GPUs.
* Updated the X configuration option UseDisplayDevice to honor the value none on any GPU.
* Added support for DKMS in nvidia-installer. Installing the kernel module through DKMS allows
the module to be rebuilt automatically when changing to a different Linux kernel. See the
README and the nvidia-installer help text for the --dkms option.
* Added RandR output properties _ConnectorLocation, ConnectorNumber, ConnectorType, EDID, _GUID,
and SignalFormat. See the README for details on these properties.
* Extended support for Base Mosaic to all G80+ SLI configurations with up to three displays.
* Fixed a bug that caused some monitors to fail to wake from DPMS suspend mode when multiple
DisplayPort monitors were attached to one GPU.
* Removed controls for XVideo attributes from the "X Server XVideo Settings" page of the
nvidia-settings control panel. XVideo attributes can be configured in XVideo player applications,
or through utilities such as xvattr.
* Fixed a bug that caused all ports on an XVideo adaptor to share color correction settings.
* Removed support for the following X configuration options:
SecondMonitorHorizSync
SecondMonitorVertRefresh
Similar control is available through the NVIDIA HorizSync and VertRefresh X configuration options.
Please see the NVIDIA driver README for details.
* Fixed a bug that prevented NVIDIA 3D Vision Pro from working properly when switching between
X servers on different VTs.

-------------------------------------------------------------------
Tue Jun 19 11:36:43 CET 2012 - bumblebee-project@hotmail.com

- Update to 302.17

* Added support for the following GPUs:
GeForce GT 620M
GeForce GT 640M
GeForce GT 640M LE
GeForce GT 650M
GeForce GTX 660M
GeForce GTX 670M
GeForce GTX 675M
GeForce GTX 555
GeForce GTX 560 SE
GeForce GT 415
GeForce GTX 460 v2
NVS 5400M
NVS 310
Quadro 410
* Made nvidiaXineramaInfoOrder consistent with the RRSetOutputPrimary and
RRGetOutputPrimary RandR requests: changes to either nvidiaXineramaInfoOrder or
RandR OutputPrimary will be reflected in the other.
* Fixed an interaction problem between RandR 1.2, ConstrainCursor, and panning that prevented
panning from working properly.
* Fixed a bug that caused RandR RRNotify_CrtcChange events to not be generated when switching
between MetaModes with the same total size but different layout of display devices. This bug
caused some window managers to not update their layouts in response to switching same-sized
MetaModes.
* Added support for desktop panning when rotation, reflection, or transformation is applied
to a display device (either through RandR or through the MetaMode syntax); panning would
previously be ignored in that case.
* Added an "EDID" property to RandR 1.2 outputs. This property contains the binary contents of
the connected monitor's extended display identification data, which allows applications such as
the GNOME display properties dialog to query information about it.
* Fixed a bug that caused audio over HDMI to not work on some GPUs after querying the RandR
configuration (e.g., `xrandr -q`).
* Added the "nvidiaXineramaInfo" X configuration option to report the layout of multiple display
devices within an X screen. This is enabled by default. When disabled on X servers with
RandR 1.2 support, the NVIDIA X driver will report one screen-sized region. When disabled on
X servers without RandR 1.2 support, no Xinerama information will be reported. For backwards
compatibility, the "NoTwinViewXineramaInfo" option disables nvidiaXineramaInfo.
* Added the "nvidiaXineramaInfoOrder" X configuration option as a replacement for
"TwinViewXineramaInfoOrder". For backwards compatibility, "TwinViewXineramaInfoOrder" is kept as
a synonym for "nvidiaXineramaInfoOrder".
* Added the "nvidiaXineramaInfoOverride" X configuration option as a replacement for
"TwinViewXineramaInfoOverride". For backwards compatibility, "TwinViewXineramaInfoOverride" is kept
as a synonym for "nvidiaXineramaInfoOverride".
* Fixed a bug that prevented the use of some SLI Mosaic topologies.
* Added the "MetaModeOrientation" X configuration option as a replacement for "TwinViewOrientation".
"TwinViewOrientation" is kept as a synonym for "MetaModeOrientation", for backwards compatibility.
* Disabled the use of certain OpenGL optimizations with Autodesk Maya and Mudbox, due to conflicts
between these applications and the optimizations. Some performance loss in Autodesk Maya and
Mudbox is possible, as a result.
* Fixed a behavior issue where redundant DPMS state transitions were leading to unexpected screen
blanking on DisplayPort displays.

-------------------------------------------------------------------
Wed Jun 13 10:17:45 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.59

* Added support for the following GPUs:

NVS 5400M
NVS 310
GeForce GT 620M
GeForce GT 640M
GeForce GT 640M LE
GeForce GT 650M
GeForce GTX 660M
GeForce GTX 670M
GeForce GTX 675M
GeForce GTX 555
GeForce GTX 560 SE
GeForce GT 415
GeForce GTX 460 v2

* Disabled the use of certain OpenGL optimizations with Autodesk Maya and Mudbox, due to
conflicts between these applications and the optimizations. Some performance loss in
Autodesk Maya and Mudbox is possible, as a result.
* Fixed a behavior issue where redundant DPMS state transitions were leading to unexpected
screen blanking on DisplayPort displays.

-------------------------------------------------------------------
Thu May 31 15:34:52 CET 2012 - bumblebee-project@hotmail.com

- Update to 302.11

* Added support for the following GPUs:
GeForce GTX 690
GeForce GTX 670
GeForce 605
GeForce GT 610
GeForce GT 630
GeForce GT 640
GeForce GT 645
* Fixed a bug affecting some G-Sync configurations which could cause active stereo content to be
inverted on some display devices.
* Added support for calculating the physical size and DPI of each RandR 1.2 Output using the
EDID Detailed Timing Description.
* Fixed a bug that prevented a workaround for the invalid EDID in certain AUO laptop flat panels
from being applied, leading to an 800x600 desktop repeated several times across the screen.
* Fixed a bug that caused the link configuration of DisplayPort devices to be reported incorrectly
in nvidia-settings.

-------------------------------------------------------------------
Thu May 31 15:34:46 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.53

* Added support for the following GPU:

GeForce GTX 670
GeForce 605
GeForce GT 610
GeForce GT 630
GeForce GT 640
GeForce GT 645

* Fixed a bug affecting some G-Sync configurations which could cause active stereo content to be
inverted on some display devices.

-------------------------------------------------------------------
Fri May 4 23:52:21 CET 2012 - bumblebee-project@hotmail.com

- Update to 302.07

* Fixed a bug that caused OpenGL programs to leak file descriptors when calling exec().
* Fixed rendering corruption at the start of new X server generation.
* Added X driver support for RandR 1.2 and RandR 1.3.
See "Support for the X Resize and Rotate Extension" in the README for details.
* Extended the MetaMode X configuration option syntax with the following new attributes:
Rotation : specifies the display device's rotation
Reflection : specifies the display device's reflection
Transform : specifies a 3x3 transformation matrix to be applied to the display device
ViewPortOut : specifies the region of the mode in which to display pixels
ViewPortIn : specifies the size of the region in the X screen to display in the ViewPortOut

For example, "DFP-0: nvidia-auto-select { Rotation=left }".
See "Configuring Multiple Display Devices on One X Screen" in the README for details.
* Removed the TwinView X configuration option; the functionality it provided is now enabled by default.

Previously, the NVIDIA X driver only enabled one display device for an X screen unless TwinView was
enabled. Now, the NVIDIA X driver enables, by default, as many display devices as the GPU supports
driving simultaneously. To limit how many display devices are driven by an X screen,
use the UseDisplayDevice X configuration option.
* Added a CurrentMetaMode attribute to the nvidia-settings command line,
to query and set the current MetaMode.

As an example, these two commands are equivalent:

xrandr --output DVI-I-2 --mode 1280x1024 --pos 0x0 --output DVI-I-3 --mode 1920x1200 --pos 1280x0

nvidia-settings --assign CurrentMetaMode="DVI-I-2: 1280x1024 +0+0, DVI-I-3: 1920x1200 +1280+0"
* Removed overscan compensation configurability from NV-CONTROL and nvidia-settings. This can be
configured, with finer granularity, through the ViewPortIn and ViewPortOut MetaMode attributes.
See "Configuring Multiple Display Devices on One X Screen" in the README for details.
* Altered mode validation such that for digital display devices the X driver only allows, by default,
modes which are reported in the EDID. Previously, the NVIDIA X driver allowed other modes,
but implicitly scaled those other modes to one of the EDID modes.

Now, only the modes in the EDID are validated and the X driver does not do any implicit scaling.
Any desired scaling can be configured explicitly through the new ViewPortIn and
ViewPortOut MetaMode attributes.
See "Configuring Multiple Display Devices on One X Screen" in the README for details.
* Removed Flat Panel Scaling configurability in nvidia-settings. Any desired scaling can be
configured through the new ViewPortIn and ViewPortOut MetaMode attributes.
* Hotplug events (specifically, the RRNotify_OutputChange RandR event) are now generated when
display devices are connected and disconnected from the GPU. Many desktop environments
automatically resize the X desktop in response to these events.
* Added display device name aliases, such that X configuration options that use display device
names can refer to a display device by one of several names, including the RandR Output name
for the display device. The X log reports the list of aliases for each display device.
* Updated EDID parsing to include more complete support for EDID 1.4 and more recent versions
of CEA-861.
* Removed the Rotate X configuration option. This was used to statically rotate the X screen.
Its functionality is replaced by the Rotation MetaMode attribute and RandR 1.2 rotation support.
See the README for details.
* Removed the RandRRotation X configuration option. This enabled configurability of X screen
rotation via RandR 1.1. Its functionality is replaced by the Rotation MetaMode attribute and
RandR 1.2 rotation support. See the README for details.
* Removed support for the following NV-CONTROL attributes:
NV_CTRL_GPU_SCALING
NV_CTRL_GPU_SCALING_DEFAULT_TARGET
NV_CTRL_GPU_SCALING_DEFAULT_METHOD
NV_CTRL_DFP_SCALING_ACTIVE
NV_CTRL_GPU_SCALING_ACTIVE
NV_CTRL_FRONTEND_RESOLUTION
NV_CTRL_BACKEND_RESOLUTION
NV_CTRL_OVERSCAN_COMPENSATION
NV_CTRL_FLATPANEL_BEST_FIT_RESOLUTION
* Improved rendering performance for RENDER bitmap text.
* Enabled the OpenGL "Sync to VBlank" option by default.
* Added a new option, --restore-original-backup, to nvidia-xconfig. nvidia-xconfig creates a
backup of the original X configuration file when modifying an X configuration file that does not
appear to have been previously modified by nvidia-xconfig. This option restores a backup of the
original X configuration file, if such a backup is found.
* Expose the following additional FSAA modes via NV-CONTROL, nvidia-settings, and through X visuals
and GLXFBConfigs:
16X multisample FSAA on all GeForce GPUs
Coverage sample FSAA on G80 and above GeForce GPUs
32X multisample FSAA on G80 and above Quadro GPUs
64X multisample FSAA on Fermi and above Quadro GPUs
* Enabled conformant texture clamping by default in OpenGL.
* Removed support for the GVO Clone mode NV-CONTROL attributes:
NV_CTRL_GVO_DISPLAY_X_SCREEN
NV_CTRL_GVO_X_SCREEN_PAN_X
NV_CTRL_GVO_X_SCREEN_PAN_Y
* Added a new, higher resolution icon for nvidia-settings.
* Updated the NVIDIA X driver's handling of X configuration options that affect an entire GPU,
not just a particular X screen running on a GPU (e.g., NoPowerConnectorCheck):
for such X configuration options, the X driver will now honor the option on any of
the X screens configured on the GPU. Prior to this change, the NVIDIA X driver only honored
such options on the first X screen configured on a GPU.
* Added a checkbox to nvidia-settings to control the texture clamping attribute. When the box is
checked, OpenGL textures are clamped according to the OpenGL specification. When it is unchecked,
GL_CLAMP is remapped to GL_CLAMP_TO_EDGE for borderless 2D textures.
* Removed the "Display" and "X Screen" tabs from the "X Server Display Configuration Page" of
nvidia-settings, and added a new "Selection" dropdown menu for selecting X screens or display
devices. This makes it easier to select X screens/Displays that are hidden.
* Fixed a problem where starting, stopping, and moving OpenGL application windows was very slow
on Quadro FX 4600, Quadro FX 5600, GeForce 8800 GTX, GeForce 8800 GTS, and GeForce 8800 Ultra.
* Fixed an OpenGL performance regression which affected Geforce 6 and Geforce 7 series integrated GPUs.

-------------------------------------------------------------------
Fri May 4 23:22:04 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.49

* Added support for the following GPU:
GeForce GTX 690
* Fixed a problem where starting, stopping, and moving OpenGL application windows was very slow on
Quadro FX 4600, Quadro FX 5600, GeForce 8800 GTX, GeForce 8800 GTS, and GeForce 8800 Ultra.
* Fixed an OpenGL performance regression which affected Geforce 6 and Geforce 7 series integrated GPUs.

-------------------------------------------------------------------
Thu Apr 12 10:39:13 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.40

* Closed a security vulnerability which made it possible for attackers to reconfigure GPUs
to gain access to arbitrary system memory. For further details,
see: http://nvidia.custhelp.com/app/answers/detail/a_id/3109
* Fixed a bug that caused DisplayPort devices to occasionally fail to turn back on after
the system is resumed from suspend.
* Added a ModeValidation X configuration option token, "AllowNon3DVisionModes", to allow modes
that are not optimized for NVIDIA 3D Vision to be validated on 3D Vision monitors.
* Added support for the following GPUs:
GeForce GT 635M
GeForce GT 610

-------------------------------------------------------------------
Sun Apr 1 22:37:51 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.33

* Added support for the following GPUs:
GeForce GTX 680
GeForce GT 630M
GeForce GT 620
* Fixed a VDPAU bug where decoding some H.264 streams would cause hardware errors on lower-end products,
resulting in corruption and poor performance.
* Fixed a bug that caused DisplayPort audio to stop working after monitors are hotplugged on GeForce GT 520.
* Improved compatibility with recent Linux kernels.
* Fixed a behavior change that prevented ConnectedMonitor from being usable with DisplayPort connectors.
* Marked the GVO Clone mode NV-CONTROL attributes:

NV_CTRL_GVO_DISPLAY_X_SCREEN
NV_CTRL_GVO_X_SCREEN_PAN_X
NV_CTRL_GVO_X_SCREEN_PAN_Y

as deprecated. They will be removed in a future release. To display an X screen over GVO,
it is recommended to use GVO with MetaModes, instead.
* Fixed a bug that caused DisplayPort devices to not be listed in Xorg.*.log. For example,
if only DisplayPort devices are attached, the log file would contain
Quote:
(--) NVIDIA(0): Connected display device(s) on NVIDIA GPU at PCI:2:0:0
(--) NVIDIA(0): none
* Added support for 3D Vision ready displays that have a NVIDIA 3D Vision infrared emitter
built inside the panel itself.
* Fixed a bug that caused OpenGL applications to crash with some libc versions, such as eglibc 2.15.
* Fixed a bug that caused HDMI audio to stop working on AppleTV devices when an X server was started.

-------------------------------------------------------------------
Thu Feb 16 10:05:40 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.20

* Fixed a bug that caused black areas to appear on the back faces of some models in Maya.
* Fixed a bug that resulted in the printing of spurious loader error messages.
* Fixed a bug that could cause X to crash after hotplugging displays.
* Fixed a bug which caused face selections to be misrendered in Maya when using the paint selection tool.
* Improved performance for interactive tools in Mudbox.
* Added a "--no-opengl-files" option to nvidia-installer to allow installation of the driver without OpenGL files that might conflict with already installed OpenGL implementations.
* Split the DFP configuration page in nvidia-settings into multiple tabs, allowing the controls to be displayed on smaller screens.

-------------------------------------------------------------------
Fri Feb 10 13:30:25 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.17

* Fixed a bug that prevented the internal panel from working on some laptops with GeForce 7 series GPUs.
* Added support for xserver 1.11.99.901 (also known as 1.12 RC1).

-------------------------------------------------------------------
Mon Jan 2 13:44:04 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.09

* Added support for the following GPU:
* Tesla X2090
* Fixed an OpenGL bug where using display lists on Fermi-based GPUs could result in missing rendering in some cases.
* Fixed an OpenGL bug that caused incorrect rendering when using framebuffer objects to render to 16-bit color textures with alpha.
* Fixed two bugs that caused sporadic application crashes in some multi-threaded OpenGL applications.
* Fixed a bug that caused creating OpenGL 4.2 contexts with glXCreateContextAttribsARB to fail.
* Fixed a bug that caused OpenGL to print

Xlib: extension "NV-GLX" missing on display ":0".

when used with a non-NVIDIA implementation of the GLX X extension.
* Implemented color depth 30 (10 bits per component) support for GeForce 8 series and higher GPUs.
* Implemented support for constraining cursors to the visible regions of connected displays; see the "ConstrainCursor" X Option in the README for details.
* Fixed a bug that would cause Firefox to abort on pages with Flash when layers acceleration was force-enabled on Linux and Solaris.

-------------------------------------------------------------------
Thu Dec 8 22:29:53 CET 2011 - bumblebee-project@hotmail.com

- Update to 290.10

* Fixed a bug that would cause OpenGL applications to crash when run with recent releases of glibc such as glibc 2.14.90.
* Improved the performance of FBO bind operations when using Xinerama by ~30% in some cases.
* Fixed a bug that could cause stereo corruption when driving a stereo display and a non-stereo display from the same GPU.
* Fixed a bug that could cause display devices on a secondary GPU to get swapped between X screens when restarting the X server.
* Fixed a bug that could result in line flickering in full-scene anti- aliasing contexts.
* Fixed a bug that caused the physical dimensions of rotated monitors to be reported incorrectly.
* Add support for the pre-VBO DrawArrays command in the server-side GLX driver module. The NVIDIA client-side GLX implementation never sends this command, but the server needs to support it for compatibility with other GLX client implementations.
* Fixed a regression that caused blank/white windows when exhausting video memory on GeForce 6 and 7 series GPUs while using composited desktops.
* Fixed a bug that caused a crash when glDrawArrays was used with a non-VBO vertex attribute array to draw on a Xinerama screen other than screen 0 using an indirect GLX context.

-------------------------------------------------------------------
Tue Oct 25 10:51:47 CEST 2011 - bumblebee-project@hotmail.com

- Update to 290.03
* Added support for the following GPU:
GeForce 510
* Fixed a bug that prevented the driver from loading on some systems with integrated graphics.
* Fixed issues in VDPAU that prevented allocating and displaying extremely large VdpOutputSurfaces.
* Added support for limiting heap allocations in the OpenGL driver through the use of the __GL_HEAP_ALLOC_LIMIT environment variable. See the README for further details.
* Added an "Accel" option to the X driver to allow disabling its use of the graphics processing hardware. This is useful when other components, such as CUDA, require exclusive use of the GPU's processing cores.
* Modified how the OpenGL driver allocates executable memory so it may continue to function properly if /tmp is mounted noexec. As some fallback allocation methods may be prohibited under SELinux policy, the driver now supports detection of this policy as well as manual override of this detection via the __GL_SELINUX_BOOLEANS environment variable.
* Fixed a bug that caused various GLSL built-in uniforms to not be updated properly when calling glPopAttrib.
* Improved performance by caching compiled OpenGL shaders to disk. Added a "GLShaderDiskCache" option to the X driver to enable/disable this feature. Added the __GL_SHADER_DISK_CACHE and __GL_SHADER_DISK_CACHE_PATH environment variables for further configuration. See the README for further details.
* Fixed a bug that caused trapezoid and triangle rendering to be very slow on older GPUs with xorg-server 1.11.

-------------------------------------------------------------------
Sat Oct 8 16:02:49 CEST 2011 - bumblebee-project@hotmail.com

- Update to 285.05.09
* Added support for the following GPU:
GeForce GT 520MX
* Added support for xserver ABI 11 (xorg-server 1.11).
* Fixed a bug causing a Linux kernel BUG when retrieving CPU information on some systems.
* Fixed a bug causing some applications to hang on exit.
* Fixed a bug causing flickering in some GPU/display combinations.
* Fixed a bug that could result in poor OpenGL performance after hotplugging a monitor.
* Fixed a bug causing possible text corruption when recovering from GPU errors.

-------------------------------------------------------------------
Sun Sep 25 16:23:03 CEST 2011 - bumblebee-project@hotmail.com

- Initial release.

Places

File dkms-nvidia.changes of Package dkms-nvidia

Places