File dkms-nvidia.changes of Package x11-video-nvidia

Overview Repositories Revisions Requests Users Attributes Meta

File dkms-nvidia.changes of Package x11-video-nvidia (Revision ddfd5cfced69f92fe4d984b4b478a219)

Currently displaying revision ddfd5cfced69f92fe4d984b4b478a219 , Show latest

------------------------------------------------------------------
Sun 14 Jan 16:05:00 CET 2024 - bumblebee.obs@gmail.com

- Update to 535.98

* Fixed an issue which caused the following error message to
   appear spuriously when using SLI with the NVIDIA Open GPU
   Kernel Modules:
    (EE) NVIDIA: Unable to disable FB size compare
 * Fixed a bug which prevented DKMS from registering kernel modules.
 * Fixed a bug which could cause the screen to flicker.

------------------------------------------------------------------
Sun 14 Jan 15:58:00 CET 2024 - bumblebee.obs@gmail.com

- Update to 535.86.05

* Fixed a bug that caused excessive memory consumption when OpenGL
   and Vulkan applications were running while VT-switched away
   from X.
 * Fixed a bug that could cause the kernel to panic when video
   memory is full.
 * Fixed a bug that prevented displays from refreshing when using
   an NVIDIA PRIME Display Offload sink.
 * Fixed a bug that could cause some Variable Refresh Rate (VRR)
   monitors to flicker by allowing the refresh rate to drop below
   the monitor's minimum.
 * Fixed a bug that caused corruption when running Vulkan
   applications.
 * Fixed a regression that could cause a system hang when running
   windowed Vulkan applications with sync-to-vblank enabled.
 * Fixed a video memory leak observed when turning off a connected
   monitor while using certain Wayland compositors.

------------------------------------------------------------------
Fri 16 Jun 23:12:00 CET 2023 - bumblebee.obs@gmail.com

- Update to 535.54.03

* Added support for the VK_EXT_memory_priority, and 
   VK_EXT_pageable_device_memory extensions for Turing+ GPUs.
 * Improved the performance of Minecraft Java Edition on RTX 3000
   series GPUs.
 * Fixed a memory leak in the NVIDIA GLX driver, as reported at:
       https://forums.developer.nvidia.com/t/222697
 * Added support for driving very high pixel clock mode timings
   such as 8K @ 60Hz. Please see the "MaxOneHardwareHead" X11
   ModeValidation token in the README for details.
 * Extended Dynamic Boost support on notebooks to include older
   Renoir and Cezanne chipsets, in addition to Rembrandt and
   newer AMD chipsets.
 * Fixed a bug that caused Vulkan X11 swapchain creation to fail
   on GPUs without a display engine when the VK_KHR_present_id
   extension is used.
 * Fixed console restore on legacy VGA consoles when using the
   NVIDIA Open GPU Kernel Modules.
 * Added nvoptix.bin to the driver package. This data file is
   used by the OptiX ray tracing engine library, libnvoptix.so.1.
 * Removed libnvidia-compiler.so.VERSION from the driver package.
   This functionality is now provided by other driver libraries.
 * Added power usage and power limits information to
   nvidia-settings PowerMizer page.
 * Updated NV_CTRL_GPU_POWER_SOURCE NV-CONTROL API to report
   undersized power source.
 * Add support for version 4 of the linux-dmabuf wayland
   protocol.
 * Added NV-CONTROL attributes
   NV_CTRL_FRAMELOCK_MULTIPLY_DIVIDE_MODE and
   NV_CTRL_FRAMELOCK_MULTIPLY_DIVIDE_VALUE to allow syncing a 
   Quadro Sync II card to different House Sync signal rates. This
   feature requires firmware version 2.18 or later; to download 
   the latest firmware version, please visit:
       https://www.nvidia.com/en-us/drivers/
                   firmware/quadro-sync-firmware-driver/
 * Added support for the VK_KHR_video_queue,
   VK_KHR_video_decode_queue, VK_KHR_video_decode_h264 and
   VK_KHR_video_decode_h265 extensions.
 * Added an application profile to avoid performance problems
   in Xfce 4 when the OpenGL compositor backend is enabled along
   with G-SYNC.
 * Added support for suspend and resume when using GSP firmware.
 * Moved the nvidia-settings application icon into the 'hicolor'
   icon theme, which allows it to be customized by other icon
   themes selected in the desktop environment.
 * Fixed a bug that prevented PRIME render offload from working
   for Wayland applications when running on a system with an
   AMD iGPU.
 * Fixed a bug that prevented nvidia-installer from recording
   kernel log output to the installer log in some module loading
   failure paths.
 * Changed nvidia-installer to no longer use the $XDG_DATA_DIRS
   environment variable. XDG data files are now installed to a
   path specified by the --xdg-data-dir option, or /usr/share if
   not specified.
 * This fixes a problem when Flatpak is installed that caused
   the installer to place the nvidia-settings.desktop file in
   /root/.local/share/flatpak/exports/share/applications.
 * Changed the behavior of glXGetRefreshRateSGI() for non-integer
   refresh rates to round to the nearest whole number rather than
   truncating.
 * Changed the compression format of the .run installer package
   from xz to zstd. This results in a smaller compressed package,
   and faster decompression performance. A fallback zstd
   decompressor is embedded into the installer package for
   systems which do not already have a zstd decompression program
   installed.
 * Fixed a bug that caused nvidia-installer to mistakenly unload
   some already loaded non-NVIDIA kernel modules.
 * Fixed a bug which caused incorrect reporting of presentation 
   times when using the VK_NV_present_barrier Vulkan extension.
 * Fixed a bug that caused modesets to fail in some Wayland 
   configurations.
 * Fixed a bug that caused head-mounted displays (HMDs) to
   display black after a modeset.
 * Fixed a bug that prevented SLI Mosaic controls from being
   displayed in the nvidia-settings control panel when using
   GSP Firmware.
 * Fixed a bug that could cause image corruption when unbinding
   Vulkan sparse textures.
 * Fixed a bug that caused modesets to fail in some Wayland
   configurations.
 * Fixed a bug that caused head-mounted displays (HMDs) to
   display black after a modeset.

------------------------------------------------------------------
Fri 16 Jun 22:21:00 CET 2023 - bumblebee.obs@gmail.com

- Update to 535.43.02

* Added support for the VK_EXT_memory_priority, and
   VK_EXT_pageable_device_memory extensions for Turing+ GPUs.
 * Improved the performance of Minecraft Java Edition on RTX 3000
   series GPUs.
 * Fixed a memory leak in the NVIDIA GLX driver, as reported at:
       https://forums.developer.nvidia.com/t/222697
 * Added support for driving very high pixel clock mode timings such
   as 8K @ 60Hz. Please see the "MaxOneHardwareHead" X11
   ModeValidation token in the README for details.
 * Extended Dynamic Boost support on notebooks to include older
   Renoir and Cezanne chipsets, in addition to Rembrandt and newer
   AMD chipsets.
 * Fixed a bug that caused Vulkan X11 swapchain creation to fail
   on GPUs without a display engine when the VK_KHR_present_id
   extension is used.
 * Fixed console restore on legacy VGA consoles when using the
   NVIDIA Open GPU Kernel Modules.
 * Added nvoptix.bin to the driver package. This data file is used
   by the OptiX ray tracing engine library, libnvoptix.so.1.
 * Removed libnvidia-compiler.so.VERSION from the driver package.
   This functionality is now provided by other driver libraries.
 * Added power usage and power limits information to
   nvidia-settings PowerMizer page.
 * Updated NV_CTRL_GPU_POWER_SOURCE NV-CONTROL API to report
   undersized power source.
 * Add support for version 4 of the linux-dmabuf wayland protocol.
 * Added NV-CONTROL attributes
   NV_CTRL_FRAMELOCK_MULTIPLY_DIVIDE_MODE and
   NV_CTRL_FRAMELOCK_MULTIPLY_DIVIDE_VALUE to allow syncing a
   Quadro Sync II card to different House Sync signal rates. This
   feature requires firmware version 2.18 or later; to download the
   latest firmware version, please visit:
       https://www.nvidia.com/en-us/drivers/
                             firmware/quadro-sync-firmware-driver/
 * Added support for the VK_KHR_video_queue,
   VK_KHR_video_decode_queue, VK_KHR_video_decode_h264 and
   VK_KHR_video_decode_h265 extensions.
 * Added an application profile to avoid performance problems in
   Xfce 4 when the OpenGL compositor backend is enabled along with
   G-SYNC.
 * Added support for suspend and resume when using GSP firmware.
 * Moved the nvidia-settings application icon into the 'hicolor'
   icon theme, which allows it to be customized by other icon
   themes selected in the desktop environment.
 * Fixed a bug that prevented PRIME render offload from working for
   Wayland applications when running on a system with an AMD iGPU.
 * Fixed a bug that prevented nvidia-installer from recording
   kernel log output to the installer log in some module loading
   failure paths.
 * Changed nvidia-installer to no longer use the $XDG_DATA_DIRS
   environment variable. XDG data files are now installed to a
   path specified by the --xdg-data-dir option, or /usr/share if
   not specified.
 * This fixes a problem when Flatpak is installed that caused the
   installer to place the nvidia-settings.desktop file in
   /root/.local/share/flatpak/exports/share/applications.
 * Changed the behavior of glXGetRefreshRateSGI() for non-integer
   refresh rates to round to the nearest whole number rather than
   truncating.
 * Changed the compression format of the .run installer package
   from xz to zstd. This results in a smaller compressed package,
   and faster decompression performance. A fallback zstd
   decompressor is embedded into the installer package for
   systems which do not already have a zstd decompression program
   installed.
 * Fixed a bug that caused nvidia-installer to mistakenly unload
   some already loaded non-NVIDIA kernel modules.
 * Fixed a bug which caused incorrect reporting of presentation
   times when using the VK_NV_present_barrier Vulkan extension.

------------------------------------------------------------------
Thu 15 Jun 22:50:00 CET 2023 - bumblebee.obs@gmail.com

- Update to 530.41.03

* Added an application profile to avoid performance problems in
   Xfce 4 when the OpenGL compositor backend is enabled along with
   G-SYNC.
 * Added support for suspend and resume when using GSP firmware.
 * Moved the nvidia-settings application icon into the 'hicolor'
   icon theme, which allows it to be customized by other icon
   themes selected in the desktop environment.
 * Fixed a bug that prevented PRIME render offload from working
   for Wayland applications when running on a system with an
   AMD iGPU.
 * Fixed a bug that prevented nvidia-installer from recording
   kernel log output to the installer log in some module loading
   failure paths.
 * Changed nvidia-installer to no longer use the $XDG_DATA_DIRS
   environment variable. XDG data files are now installed to
   a path specified by the --xdg-data-dir option, or /usr/share
   if not specified.
 * This fixes a problem when Flatpak is installed that caused the
   installer to place the nvidia-settings.desktop file in
   /root/.local/share/flatpak/exports/share/applications.
 * Changed the behavior of glXGetRefreshRateSGI() for non-integer
   refresh rates to round to the nearest whole number rather
   than truncating.
 * Changed the compression format of the .run installer package 
   from xz to zstd. This results in a smaller compressed package,
   and faster decompression performance. A fallback zstd
   decompressor is embedded into the installer package for
   systems which do not already have a zstd decompression program
   installed.
 * Fixed a bug that caused nvidia-installer to mistakenly unload
   some already loaded non-NVIDIA kernel modules.
 * Added compatibility for Linux kernels with Indirect Branch
   Tracking (IBT).
 * Added NV-CONTROL attributes
   NV_CTRL_FRAMELOCK_MULTIPLY_DIVIDE_MODE and
   NV_CTRL_FRAMELOCK_MULTIPLY_DIVIDE_VALUE to allow syncing a
   Quadro Sync II card to different House Sync signal rates. This
   feature requires firmware version 2.18 or later; to download
   the latest firmware version, please visit:
      https://www.nvidia.com/en-us/drivers/firmware/
                                    quadro-sync-firmware-driver/
 * Added support for the VK_KHR_video_queue,
   VK_KHR_video_decode_queue, VK_KHR_video_decode_h264 and
   VK_KHR_video_decode_h265 extensions.
 * Fixed a bug that could cause the nvidia-settings control
   panel to crash when resetting the display layout.
 * Fixed a bug that could cause excessive GPU power consumption
   at idle when driving multiple displays with a high refresh rate.
 * Fixed a bug in nvidia-powerd which could cause excessive
   CPU usage.
 * Fixed an issue which could cause applications to run at 1 FPS
   when using an NVIDIA PRIME Display Offload sink as the only
   active display.

------------------------------------------------------------------
Thu 15 Jun 22:50:00 CET 2023 - bumblebee.obs@gmail.com

- Update to 530.30.02

------------------------------------------------------------------
Thu 15 Jun 22:03:00 CET 2023 - bumblebee.obs@gmail.com

- Update to 525.89.02

* Fixed a bug that could cause banding or flickering of color
   gradients on DisplayPort monitors.

------------------------------------------------------------------
Thu 15 Jun 21:27:00 CET 2023 - bumblebee.obs@gmail.com

- Update to 525.85.05

* Improved the reliability of suspend and resume on UEFI systems
   when using certain display panels.
 * Fixed a bug that prevented some controls in the nvidia-settings
   control panel from working when running an X server as an
   unprivileged user.
 * Fixed a bug that could cause VK_ERROR_DEVICE_LOST when using
   VK_MEMORY_ALLOCATE_DEVICE_ADDRESS_CAPTURE_REPLAY_BIT to
   allocate memory.
 * Disabled Fixed Rate Link (FRL) when using passive DisplayPort
   to HDMI dongles, which are incompatible with FRL.

------------------------------------------------------------------
Sat 10 Jun 21:53:00 CET 2023 - bumblebee.obs@gmail.com

- Update to 525.78.01

* Fixed a bug that could cause the nvidia-settings control panel
   to crash when using a newer control panel with an older driver.
 * Fixed a regression that prevented the G-SYNC/G-SYNC Compatible
   Visual Indicator from being displayed when running Vulkan X11
   applications.
 * Fixed a bug where usage of VK_KHR_present_id could cause
   applications to crash with Xid 32 errors.
 * Fixed excess CPU usage in hybrid graphics configurations where
   an external display is connected to an NVIDIA discrete GPU and
   configured as a PRIME Display Offload sink (also known as
   "Reverse Prime").

------------------------------------------------------------------
Thu 29 Dec 22:44:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 525.60.11

* Fixed a bug which caused Dynamic Boost to not engage on certain
   AmpereGPU based notebooks.
 * Added support for Dynamic Boost on notebooks with AMD CPUs.
 * Improved the performance of PRIME render-offloaded applications.
 * Fixed a regression that prevented Warp & Blend from working
   correctly.
 * Fixed a bug that resulted in stutter when moving windows in
   GNOME.
 * Added support for the EGL_MESA_platform_surfaceless extension.
 * Updated the nvidia-settings control panel to prevent the
   creationof display layouts that exceed hardware size
   limitations when using the SLI Mosaic configuration page,
   and to display a warning if such a layout is created manually
   in the Display Configuration page.
 * Removed the hard dependency on GTK 2 when building
   nvidia-settingsfrom source. nvidia-settings may now be built
   with support for GTK 2 only, GTK 3 only, or both GTK 2 and
   GTK 3.
 * Fixed a bug which caused suspend to fail on systems running
   GNOME 3as a Wayland compositor with
   NVreg_PreserveVideoMemoryAllocations enabled.
 * Updated the open kernel modules to support Quadro Sync,
   Stereo,rotation in X11, and YUV 4:2:0 on Turing.
 * Updated an error message that nvidia-installer displays when
   kernelheader files cannot be found to print full paths for
   the missing files.
 * Updated nvidia-installer to use "command -v" in place of
   depending on"which" to determine the availability and
   location of certain tools.
 * Implemented support for over-the-air updates in the Proton
   and Wine NVIDIANGX build. This feature is disabled by default
   and can be enabled by setting the "PROTON_ENABLE_NGX_UPDATER"
   environment variable to a value of "1".
 * Updated the Vulkan driver so that the following extensions
   no longerdepend on nvidia-uvm.ko being loaded at runtime:
        * VK_KHR_acceleration_structure
        * VK_KHR_deferred_host_operations
        * VK_KHR_ray_query
        * VK_KHR_ray_tracing_pipeline
        * VK_NV_cuda_kernel_launch
        * VK_NV_ray_tracing
        * VK_NV_ray_tracing_motion_blur
        * VK_NVX_binary_import
        * VK_NVX_image_view_handle 
 * Updated nvidia-installer to allow use of the
   "--add-this-kernel"feature by non-root users.
 * Updated nvidia-installer to display a more accurate progress
   bar whenbuilding the kernel modules.
 * Updated nvidia-installer to display a warning message if
   a VulkanICD loader is not detected.
 * Reworked nvidia-installer's support for DKMS: the kernel
   modules willnow be optionally registered with DKMS after the
   installer has already built and installed them on its own.
   nvidia-installer will now register the kernel modules with
   DKMS by default when the dkms(8) utility is detected on the
   system.
 * Fixed a bug in the Vulkan driver which could lead to
   corruption ingeometry and tessellation control shaders.
 * Added a new CUDA Debugger implementation for Pascal and
   newerarchitectures as a part of the driver package:
   libcudadebugger.so (previously released separately as
   "CUDA GDB Developer Preview").
 * Fixed a bug that caused nvidia-settings to find incorrect
   fan speedranges on some GPUs.  Lower-level layers of the
   driver protected the hardware from programming incorrect
   fan speeds, so the symptom was only incorrect reporting.
   Now, reporting in nvidia-settings matches what actually gets
   programmed in hardware.
 * Fixed a regression in 515.76 that caused blank screens and
   hangs whenstarting an X server on RTX 30 series GPUs in some
   configurations where the boot display is connected via HDMI.
 * Fixed a bug where Marvel's Spider-Man Remastered would
   sometimes crashwith Xid 13 errors on Turing and later.

------------------------------------------------------------------
Thu 29 Dec 22:44:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 525.53

* Fixed a bug which caused Dynamic Boost to not engage on certain
   Ampere GPU based notebooks.
 * Added support for Dynamic Boost on notebooks with AMD CPUs.
 * Fixed a bug that resulted in stutter when moving windows in
   GNOME.
 * Added support for the EGL_MESA_platform_surfaceless extension.
 * Updated the nvidia-settings control panel to prevent the
   creation of display layouts that exceed hardware size
   limitations when using the SLI Mosaic configuration page,
   and to display a warning if such a layout is created
   manually in the Display Configuration page.
 * Removed the hard dependency on GTK 2 when building
   nvidia-settings from source. nvidia-settings may now be
   built with support for GTK 2 only, GTK 3 only, or both
   GTK 2 and GTK 3.
 * Updated the open kernel modules to support Quadro Sync,
   Stereo, rotation in X11, and YUV 4:2:0 on Turing.
 * Updated an error message that nvidia-installer displays
   when kernel header files cannot be found to print full
   paths for the missing files.
 * Updated nvidia-installer to use "command -v" in place
   of depending on "which" to determine the availability and
   location of certain tools.
 * Implemented support for over-the-air updates in the Proton
   and Wine NVIDIA NGX build. This feature is disabled by
   default and can be enabled by setting the
   "PROTON_ENABLE_NGX_UPDATER" environment variable to a
   value of "1".
 * Updated the Vulkan driver so that the following
   extensions no longer depend on nvidia-uvm.ko being loaded
   at runtime:
        * VK_KHR_acceleration_structure
        * VK_KHR_deferred_host_operations
        * VK_KHR_ray_query
        * VK_KHR_ray_tracing_pipeline
        * VK_NV_cuda_kernel_launch
        * VK_NV_ray_tracing
        * VK_NV_ray_tracing_motion_blur
        * VK_NVX_binary_import
        * VK_NVX_image_view_handle 
 * Updated nvidia-installer to allow use of the "--add-this-kernel"
   feature by non-root users.
 * Updated nvidia-installer to display a more accurate progress bar
   when building the kernel modules.
 * Updated nvidia-installer to display a warning message if
   a Vulkan ICD loader is not detected.
 * Reworked nvidia-installer's support for DKMS: the kernel
   modules will now be optionally registered with DKMS after the
   installer has already built and installed them on its own.
   nvidia-installer will now register the kernel modules with DKMS
   by default when the dkms(8) utility is detected on the system.
 * Fixed a bug in the Vulkan driver which could lead to corruption
   in geometry and tessellation control shaders.
 * Added a new CUDA Debugger implementation for Pascal and newer
   architectures as a part of the driver package:
   libcudadebugger.so (previously released separately as
   "CUDA GDB Developer Preview").
 * Updated the nvidia-settings control panel to correctly limit
   the allowed values for GPUTargetFanSpeed to match the existing
   valid fan speed ranges for supported NVIDIA GPUs. The valid
   ranges are 30%-100% for Ampere or newer GPUs, and 1%-100% for
   older GPUs.
 * Fixed a regression in 515.76 that caused blank screens and
   hangs when starting an X server on RTX 30 series GPUs in some
   configurations where the boot display is connected via HDMI.
 * Fixed a bug where Marvel's Spider-Man Remastered would
   sometimes crash with Xid 13 errors on Turing and later.

------------------------------------------------------------------
Thu 29 Dec 22:44:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 520.56.06

* Implemented support for over-the-air updates in the Proton and
   Wine NVIDIA NGX build. This feature is disabled by default and
   can be enabled by setting the "PROTON_ENABLE_NGX_UPDATER"
   environment variable to a value of "1".
 * Updated the Vulkan driver so that the following extensions no
   longer depend on nvidia-uvm.ko being loaded at runtime:
        VK_KHR_acceleration_structure
        VK_KHR_deferred_host_operations
        VK_KHR_ray_query
        VK_KHR_ray_tracing_pipeline
        VK_NV_cuda_kernel_launch
        VK_NV_ray_tracing
        VK_NV_ray_tracing_motion_blur
        VK_NVX_binary_import
        VK_NVX_image_view_handle
 * Updated nvidia-installer to allow use of the
   "--add-this-kernel" feature by non-root users.
 * Updated nvidia-installer to display a more accurate progress
   bar when building the kernel modules.
 * Updated nvidia-installer to display a warning message if
   a Vulkan ICD loader is not detected.
 * Reworked nvidia-installer's support for DKMS: the kernel
   modules will now be optionally registered with DKMS after the
   installer has already built and installed them on its own.
   nvidia-installer will now register the kernel modules with DKMS
   by default when the dkms(8) utility is detected on the system.
 * Fixed a bug in the Vulkan driver which could lead to corruption
   in geometry and tessellation control shaders.
 * Added a new CUDA Debugger implementation for Pascal and newer
   architectures as a part of the driver package:
   libcudadebugger.so (previously released separately as
   "CUDA GDB Developer Preview").
 * Fixed a regression in 515.76 that caused blank screens and
   hangs when starting an X server on RTX 30 series GPUs in some
   configurations where the boot display is connected via HDMI.
 * Fixed a bug where Marvel's Spider-Man Remastered would
   sometimes crash with Xid 13 errors on Turing and later.

------------------------------------------------------------------
Sun 24 Jul 20:33:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 515.57

* Fixed a bug that could cause some graphics applications to
   crash when they are started while nvidia-drm.ko is not loaded.
 * Fixed an issue where NvFBC could return an incorrect frame if
   a capture request timed out.
 * Fixed an issue where NvFBC direct capture would wait for
   multiple queued frames to finish rendering, instead of
   returning the next rendered frame.
 * Added support for NvFBC direct capture to composite the mouse
   cursor onto frames.
 * Fixed an issue where Vulkan direct to display could not drive
   more than 4 displays from a single VkInstance.
 * Fixed a bug that prevented nvidia-settings from accurately
   reflecting changes to some configuration properties.

------------------------------------------------------------------
Sun 24 Jul 00:27:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 515.48.07

* Published the source code to a variant of the NVIDIA Linux
   kernel modules dual-licensed as MIT/GPLv2. The source is
   available here:
    https://github.com/NVIDIA/open-gpu-kernel-modules
   and will be updated each driver release. Please see the
   "Open Linux Kernel Modules" chapter in the README for details.
 * Added support for the VK_EXT_external_memory_dma_buf and
   VK_EXT_image_drm_format_modifier Vulkan extensions. To use
   this functionality, the nvidia-drm kernel module must be
   loaded with DRM KMS mode setting enabled. See the DRM KMS
   section of the README for guidance on enabling mode setting.
 * Changed nvidia-suspend.service, nvidia-resume.service, and
   nvidia-hibernate.service to use WantedBy= rather than
   RequiredBy= dependencies for systemd-suspend.service and
   systemd-hibernate.service. This avoids a problem where
   suspend or hibernate fails if the NVIDIA driver is uninstalled
   without disabling these services first.
    See https://github.com/systemd/systemd/issues/21991
   If these services were manually enabled, it may be necessary
   to update their dependencies by running
    sudo systemctl reenable nvidia-suspend.service
    nvidia-resume.service nvidia-hibernate.service
 * Interlaced modes are now disabled when active stereo is enabled.
 * NVIDIA X Server Settings will now display the quit confirmation
   dialog automatically if only there are pending changes that need
   to be manually saved. The corresponding configuration option to
   control the appearance of the quit dialog was thus also removed.
 * Removed the warning message about mismatches between the
   compiler used to build the Linux kernel and the compiler used
   to build the NVIDIA kernel modules from nvidia-installer. 
   Modern compilers are less likely to cause problems when this
   type of mismatch occurs, and it has become common in many
   distributions to build the Linux kernel with a different
   compiler than the default system compiler.
 * Updated nvidia-installer to skip test-loading the kernel
   modules on systems where no supported NVIDIA GPUs are detected.
 * Updated nvidia-installer to avoid a race condition which could
   cause the kernel module test load to fail due to udev
   automatically loading kernel modules left over from an existing
   NVIDIA driver installation. This failure resulted in an
   installation error message "Kernel module load error:
   File exists".
 * Updated the RTD3 Video Memory Utilization Threshold
   (NVreg_DynamicPowerManagementVideoMemoryThreshold) maximum value
   from 200 MB to 1024 MB.
 * Improved performance of GLX and Vulkan applications running
   in gamescope.
 * Added a "kernelopen" feature tag to the supported-gpus.json
   file, to indicate which GPUs are compatible with
   open-gpu-kernel-modules.
 * Improved Vulkan swapchain creation failure reporting.
   Applications can use the VK_EXT_debug_utils extension to
   receive additional information when an error was encountered
   in vkCreateSwapchainKHR().
 * Added a new configuration option for NVIDIA NGX to allow
   disabling the DSO signature check. See the "NGX" chapter of the
   README for more information.
 * Fixed an issue where HDMI audio output was not working in some
   cases, especially with high display refresh rates (120Hz,
   100Hz, etc.) using Fixed Rate Link (FRL) transmission mode.

------------------------------------------------------------------
Sun 24 Jul 00:27:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 515.43.04

* Published the source code to a variant of the NVIDIA Linux
   kernel modules dual-licensed as MIT/GPLv2. The source is
   available here:
    https://github.com/NVIDIA/open-gpu-kernel-modules
   and will be updated each driver release. Please see the
   "Open Linux Kernel Modules" chapter in the README for details.
 * Added support for the VK_EXT_external_memory_dma_buf and
   VK_EXT_image_drm_format_modifier Vulkan extensions. To use
   this functionality, the nvidia-drm kernel module must be
   loaded with DRM KMS mode setting enabled. See the DRM KMS
   section of the README for guidance on enabling mode setting.
 * Changed nvidia-suspend.service, nvidia-resume.service, and
   nvidia-hibernate.service to use WantedBy= rather than
   RequiredBy=dependencies for systemd-suspend.service and
   systemd-hibernate.service.This avoids a problem where
   suspend or hibernate fails if the NVIDIA driver is
   uninstalled without disabling these services first.
    See https://github.com/systemd/systemd/issues/21991
   If these services were manually enabled, it may be necessary
   to update their dependencies by running sudo systemctl reenable
   nvidia-suspend.service nvidia-resume.service
   nvidia-hibernate.service
 * Interlaced modes are now disabled when active stereo is
   enabled.
 * NVIDIA X Server Settings will now display the quit
   confirmation dialog automatically if only there are pending
   changes that need to be manually saved. The corresponding
   configuration option to control the appearance of the quit
   dialog was thus also removed.
 * Removed the warning message about mismatches between the
   compiler used to build the Linux kernel and the compiler used
   to build the NVIDIA kernel modules from nvidia-installer. Modern
   compilers are less likely to cause problems when this type of
   mismatch occurs, and it has become common in many distributions
   to build the Linux kernel with a different compiler than the
   default system compiler.
 * Updated nvidia-installer to skip test-loading the kernel
   modules on systems where no supported NVIDIA GPUs are detected.
 * Updated nvidia-installer to avoid a race condition which could
   cause the kernel module test load to fail due to udev
   automatically loading kernel modules left over from an
   existing NVIDIA driver installation. This failure resulted in
   an installation error message "Kernel module load
   error: File exists".
 * Updated the RTD3 Video Memory Utilization Threshold
   (NVreg_DynamicPowerManagementVideoMemoryThreshold) maximum
   value from 200 MB to 1024 MB.

-----------------------------------------------------------------
Sat 23 Jul 21:45:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 510.73.05

* Added a new configuration option for NVIDIA NGX to allow
   disabling the DSO signature check. See the "NGX" chapter of
   the README for more information.

------------------------------------------------------------------
Sat 23 Jul 21:37:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 510.68.02

* Fixed an issue where NvFBC was requesting Vulkan 1.0 while
   using Vulkan 1.1 core features. This caused NvFBC to fail to
   initialize with Vulkan loader versions 1.3.204 or newer.

------------------------------------------------------------------
Sat 23 Jul 21:20:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 510.60.02

* Added support for the following GPUs:
        NVIDIA GeForce RTX 3090 Ti
        NVIDIA RTX A4000H
        NVIDIA RTX A5500 
 * Fixed a bug that could cause displays with HDMI or DisplayPort
   audio to be deselected as the default audio output device after
   resuming from suspend.
 * Fixed a regression that could cause OpenGL applications to hang
   or render incorrectly after suspend/resume cycles or VT-switches
 * Fixed a bug, introduced in 495.29.05, that caused GPU "Model:"
   in /proc/driver/nvidia/gpus/<Bus:Device.Function>/information to
   be "Unknown" for some GPUs.
 * Fixed a bug that caused the nvidia-settings control panel to
   print spurious error messages
 * Fixed a bug that could prevent nvidia-installer from detecting
   the scripts/sign-file kernel module signing tool when using
   separate kernel source and output directories.
 * Fixed a bug which prevented kernel modules linked from
   precompiled kernel interface object files from being loaded on
   recent Linux kernels. This affected custom packages which were
   prepared with nvidia-installer's --add-this-kernel option,
   for example.

------------------------------------------------------------------
Sat 23 Jul 21:11:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 510.54

* Fixed a bug that could cause GPU exceptions when minimizing a
   fullscreen Vulkan application on certain desktops, such as
   Plasma.

------------------------------------------------------------------
Fri 11 Feb 22:21:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 510.47.03

* Added support for the following GPUs:
        NVIDIA GeForce RTX 3050 
 * Fixed several issues which caused the supported-gpus.json file
   to contain incorrect product information.
 * Fixed a bug that caused the nvidia-settings control panel to
   report inaccurate ECC error counts, and completely prevented
   the reporting of aggregate ECC error counts. ECC error counts
   reported by nvidia-smi were not affected.
 * Added a GUI control for setting Image Sharpening values in the
   app profiles page of the nvidia-settings control panel.
 * Fixed a bug which caused Vulkan applications to hang when the
   __GL_THREADED_OPTIMIZATIONS environment variable was set to
   enable threaded optimizations in the NVIDIA driver.
 * Fixed a bug where calls to vkWaitForPresentKHR would fail with
   VK_TIMEOUT on Maxwell and Pascal GPUs.
 * Added support for the VK_EXT_depth_clip_control extension.
 * Added support for the VK_EXT_border_color_swizzle extension.
 * Added support for the VK_EXT_image_view_min_lod extension.
 * Fixed a bug in the Vulkan compiler where 64-bit atomics were
   partially broken.
 * Fixed a bug in the Vulkan driver where VK_NULL_HANDLE was not
   properly handled as input to
   VkRenderingFragmentShadingRateAttachmentInfoKHR.imageView.
 * Added support for the VK_KHR_dynamic_rendering extension.
 * Added support for the bufferDeviceAddressCaptureReplay Vulkan
   feature.
 * Optimized the Vulkan fullscreen presentation path for X11 and
   direct-to-display swapchains.
 * Added AV1 decode support to the NVIDIA VDPAU driver. See the
   VDPAU Support appendix in the README for supported AV1 decoder
   profiles.
 * Added support for the VK_KHR_format_feature_flags2 extension.
 * Added support for the VK_KHR_maintenance4 extension.
 * Fixed a bug in the Vulkan driver where the SPIR-V Centroid
   interpolation decoration was not ignored when used in
   conjunction with FragCoord.
 * Fixed a bug in the Vulkan driver where unreferenced descriptor
   bindings were sometimes not ignored properly.
 * Fixed a bug in the Vulkan driver where vkCmdBindDescriptorSets
   would not properly handle pDynamicOffsets for compute pipelines.
 * Added support for the VK_KHR_shader_integer_dot_product
   extension.
 * Added support for the VK_EXT_primitive_topology_list_restart
   extension.
 * Added support for the VK_EXT_load_store_op_none extension.
 * Fixed a bug which caused OpenGL and Vulkan applications to
   generate excessive traffic over dbus while attempting to
   communicate with nvidia-powerd, even though nvidia-powerd was
   not running.
 * Removed the runtime loader (rtld) sanity test from
   nvidia-installer.This test has been made largely obsolete
   by GLVND.
 * Updated nvidia-xconfig to add a BusID to the "Device" section
   by default on systems with both NVIDIA and non-NVIDIA GPUs.
   This behavior can be suppressed by using the --no-busid option.
 * Enabled GSP Firmware by default on NVIDIA T4, A100, A30, A40,
   A16, A2, and several other Tesla products. Please see the
   "GSP Firmware" chapter in the README for details.
 * Fixed a bug in the Vulkan driver where some Ray Tracing
   shaders would timeout, resulting in device loss.
 * Fixed a bug in the Vulkan driver where unused input
   attributes to a vertex shader would corrupt the interpolation
   qualifiers for the shader.
 * Fixed a bug in the Vulkan driver where individual components
   of barycentric inputs could not be read.
 * Added support for the VK_KHR_present_id extension.
 * Added support for the VK_KHR_present_wait extension.
 * Added support for the VK_KHR_shader_subgroup_uniform_control_flow
   extension.
 * Fixed a bug where VK_NVX_binary_import was advertised as supported
   on unsupported platforms. This caused calls to vkCreateDevice to
   fail if applications attempted to enable VK_NVX_binary_import
   on such platforms.
 * Added support for the GBM API. This adds the new symlink
   nvidia-drm_gbm.so pointing to the file
   libnvidia-allocator.so.VERSION to implement a GBM backend driver
   usable with the GBM loader from the Mesa project version 21.2 and
   above, as well as the files libnvidia-egl-gbm.so.1.1.0 and
   15_nvidia_gbm.json, which implement EGL support for the GBM
   platform (EGL_KHR_platform_gbm).
 * Add indicator for Resizable BAR support on compatible systems.
 * Fixed a bug that could cause the X server to crash when starting
   a new server generation on PRIME configurations.
 * Removed support for NvIFROpenGL. This functionality was
   deprecated in the 470.xx driver release.
 * Removed libnvidia-cbl.so from the driver package. This
   functionality is now provided by other driver libraries.
 * Changed the minimum required Linux kernel version from 2.6.32
   to 3.10.
 * Updated nvidia.ko to load even if no supported NVIDIA GPUs
   are present when an NVIDIA NVSwitch device is detected in the
   system. Previously, nvidia.ko would fail to load into the
   kernel if no supported GPUs were present.
 * Added support for Vulkan 1.3.
 * Added a new daemon, nvidia-powerd, to provide support for the
   Dynamic Boost feature on supported systems. Dynamic Boost
   balances power between the CPU and the GPU for improved
   performance. For more details, see the "Dynamic Boost on Linux"
   chapter in the README.
 * Updated nvidia-bug-report.sh to search the systemd journal for
   nvidia-powerd logs.
 * Added a new module parameter, "peerdirect_support", to the
   nvidia-peermem.ko kernel module, to correctly support GPUDirect
   RDMA on MOFED 5.0 and older releases.
 * Added an application profile to avoid an image corruption issue
   in Blender, as described at https://developer.blender.org/T76874
 * Fixed a driver installation failure on Linux kernel 5.17 release
   candidates, where the NVIDIA kernel module failed to build with
   error "implicit declaration of function 'PDE'".

------------------------------------------------------------------
Fri 11 Feb 22:12:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 510.39.01

* Fixed several issues which caused the supported-gpus.json file
   to contain incorrect product information.
 * Fixed a bug that caused the nvidia-settings control panel to
   report inaccurate ECC error counts, and completely prevented
   the reporting of aggregate ECC error counts. ECC error counts
   reported by nvidia-smi were not affected.
 * Added a GUI control for setting Image Sharpening values in
   the app profiles page of the nvidia-settings control panel.
 * Fixed a bug which caused Vulkan applications to hang when the
   __GL_THREADED_OPTIMIZATIONS environment variable was set to
   enable threaded optimizations in the NVIDIA driver.
 * Fixed a bug where calls to vkWaitForPresentKHR would fail
   with VK_TIMEOUT on Maxwell and Pascal GPUs.
 * Added support for the VK_EXT_depth_clip_control extension.
 * Added support for the VK_EXT_border_color_swizzle extension.
 * Added support for the VK_EXT_image_view_min_lod extension.
 * Fixed a bug in the Vulkan compiler where 64-bit atomics were
   partially broken.
 * Fixed a bug in the Vulkan driver where VK_NULL_HANDLE was not
   properly handled as input to
   VkRenderingFragmentShadingRateAttachmentInfoKHR.imageView.
 * Added support for the VK_KHR_dynamic_rendering extension.
 * Added support for the bufferDeviceAddressCaptureReplay Vulkan
   feature.
 * Optimized the Vulkan fullscreen presentation path for X11 and
   direct-to-display swapchains.
 * Added AV1 decode support to the NVIDIA VDPAU driver. See the
   VDPAU Support appendix in the README for supported AV1 decoder
   profiles.
 * Added support for the VK_KHR_format_feature_flags2 extension.
 * Added support for the VK_KHR_maintenance4 extension.
 * Fixed a bug in the Vulkan driver where the SPIR-V Centroid
   interpolation decoration was not ignored when used in
   conjunction with FragCoord.
 * Fixed a bug in the Vulkan driver where unreferenced descriptor
   bindings were sometimes not ignored properly.
 * Fixed a bug in the Vulkan driver where vkCmdBindDescriptorSets
   would not properly handle pDynamicOffsets for compute pipelines.
 * Added support for the VK_KHR_shader_integer_dot_product
   extension.
 * Added support for the VK_EXT_primitive_topology_list_restart
   extension.
 * Added support for the VK_EXT_load_store_op_none extension.
 * Fixed a bug which caused OpenGL and Vulkan applications to
   generate excessive traffic over dbus while attempting to
   communicate with nvidia-powerd, even though nvidia-powerd
   was not running.
 * Removed the runtime loader (rtld) sanity test from
   nvidia-installer. This test has been made largely obsolete
   by GLVND.
 * Updated nvidia-xconfig to add a BusID to the "Device"
   section by default on systems with both NVIDIA and
   non-NVIDIA GPUs. This behavior can be suppressed by
   using the --no-busid option.
 * Enabled GSP Firmware by default on NVIDIA T4, A100, A30,
   A40, A16, A2, and several other Tesla products. Please
   see the "GSP Firmware" chapter in the README for details.
 * Fixed a bug in the Vulkan driver where some Ray Tracing
   shaders would timeout, resulting in device loss.
 * Fixed a bug in the Vulkan driver where unused input
   attributes to a vertex shader would corrupt the
   interpolation qualifiers for the shader.
 * Fixed a bug in the Vulkan driver where individual
   components of barycentric inputs could not be read.
 * Added support for the VK_KHR_present_id extension.
 * Added support for the VK_KHR_present_wait extension.
 * Added support for the VK_KHR_shader_subgroup_uniform_control_flow
   extension.
 * Fixed a bug where VK_NVX_binary_import was advertised as
   supported on unsupported platforms. This caused calls to
   vkCreateDevice to fail if applications attempted to enable
   VK_NVX_binary_import on such platforms.
 * Added support for the GBM API. This adds the new
   symlink nvidia-drm_gbm.so pointing to the file
   libnvidia-allocator.so.VERSION to implement a GBM
   backend driver usable with the GBM loader from the Mesa
   project version 21.2 and above, as well as the files
   libnvidia-egl-gbm.so.1.1.0 and 15_nvidia_gbm.json, which
   implement EGL support for the GBM platform
   (EGL_KHR_platform_gbm).
 * Add indicator for Resizable BAR support on compatible
   systems.
 * Fixed a bug that could cause the X server to crash when
   starting a new server generation on PRIME configurations.
 * Removed support for NvIFROpenGL. This functionality was
   deprecated in the 470.xx driver release.
 * Removed libnvidia-cbl.so from the driver package. This
   functionality is now provided by other driver libraries.
 * Changed the minimum required Linux kernel version from
   2.6.32 to 3.10.
 * Updated nvidia.ko to load even if no supported NVIDIA
   GPUs are present when an NVIDIA NVSwitch device is
   detected in the system. Previously, nvidia.ko would fail
   to load into the kernel if no supported GPUs were present.

------------------------------------------------------------
Fri 11 Feb 21:28:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 495.46

* Added support for the GBM API. This adds the new symlink
   nvidia-drm_gbm.so pointing to the file
   libnvidia-allocator.so.VERSION to implement a GBM backend driver
   usable with the GBM loader from the Mesa project version 21.2
   and above, as well as the files libnvidia-egl-gbm.so.1.1.0
   and 15_nvidia_gbm.json, which implement EGL support for the
   GBM platform (EGL_KHR_platform_gbm).
 * Add indicator for Resizable BAR support on compatible systems.
 * Fixed a bug that could cause the X server to crash when
   starting a new server generation on PRIME configurations.
 * Removed support for NvIFROpenGL. This functionality was
   deprecated in the 470.xx driver release.
 * Removed libnvidia-cbl.so from the driver package. This functionality
   is now provided by other driver libraries.
 * Changed the minimum required Linux kernel version from
   2.6.32 to 3.10.
 * Updated nvidia.ko to load even if no supported NVIDIA GPUs are
   present when an NVIDIA NVSwitch device is detected in the system.
   Previously, nvidia.ko would fail to load into the kernel if no
   supported GPUs were present.
 * Fixed a bug in the Vulkan driver where unused input attributes
   to a vertex shader would corrupt the interpolation qualifiers
   for the shader.
 * Fixed a bug in the Vulkan driver where individual components
   of barycentric inputs could not be read.
 * Added support for the VK_KHR_present_id extension.
 * Added support for the VK_KHR_present_wait extension.
 * Added support for the VK_KHR_shader_subgroup_uniform_control_flow
   extension.
 * Fixed a bug where VK_NVX_binary_import was advertised as supported
   on unsupported platforms. This caused calls to vkCreateDevice to
   fail if applications attempted to enable VK_NVX_binary_import on
   such platforms.
 * Added a new command line option, "--no-peermem", to
   nvidia-installer. Selecting this option prevents the installation
   of the nvidia-peermem kernel module.
 * Fixed a regression which prevented DisplayPort and HDMI 2.1
   variable refresh rate (VRR) G-SYNC Compatible monitors from
   functioning correctly in variable refresh rate mode, resulting
   in issues such as flickering.
 * Fixed a bug that can cause a kernel crash in SLI Mosaic
   configurations.
 * Added support for the EGL_NV_robustness_video_memory_purge
   extension.

------------------------------------------------------------------
Fri 11 Feb 21:13:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 495.44

* Added support for the GBM API. This adds the new symlink
   nvidia-drm_gbm.so pointing to the file
   libnvidia-allocator.so.VERSION to implement a GBM backend driver
   usable with the GBM loader from the Mesa project version 21.2
   and above, as well as the files libnvidia-egl-gbm.so.1.1.0
   and 15_nvidia_gbm.json, which implement EGL support for the
   GBM platform (EGL_KHR_platform_gbm).
 * Add indicator for Resizable BAR support on compatible systems.
 * Fixed a bug that could cause the X server to crash when
   starting a new server generation on PRIME configurations.
 * Removed support for NvIFROpenGL. This functionality was
   deprecated in the 470.xx driver release.
 * Removed libnvidia-cbl.so from the driver package. This
   functionality is now provided by other driver libraries.
 * Changed the minimum required Linux kernel version from
   2.6.32 to 3.10.
 * Updated nvidia.ko to load even if no supported NVIDIA GPUs
   are present when an NVIDIA NVSwitch device is detected in the
   system. Previously, nvidia.ko would fail to load into the
   kernel if no supported GPUs were present.
 * Fixed a bug in the Vulkan driver where unused input attributes
   to a vertex shader would corrupt the interpolation qualifiers
   for the shader.
 * Fixed a bug in the Vulkan driver where individual components
   of barycentric inputs could not be read.
 * Added support for the VK_KHR_present_id extension.
 * Added support for the VK_KHR_present_wait extension.
 * Added support for the VK_KHR_shader_subgroup_uniform_control_flow
   extension.
 * Fixed a bug where VK_NVX_binary_import was advertised as supported
   on unsupported platforms. This caused calls to vkCreateDevice to
   fail if applications attempted to enable VK_NVX_binary_import on
   such platforms.
 * Added a new command line option, "--no-peermem", to
   nvidia-installer.Selecting this option prevents the installation
   of the nvidia-peermem kernel module.
 * Fixed a regression which prevented DisplayPort and HDMI 2.1
   variable refresh rate (VRR) G-SYNC Compatible monitors from
   functioning correctly in variable refresh rate mode, resulting
   in issues such as flickering.
 * Fixed a bug that can cause a kernel crash in SLI Mosaic
   configurations.
 * Added support for the EGL_NV_robustness_video_memory_purge
   extension.

------------------------------------------------------------------
Tue  8 Feb 21:17:00 CET 2022 - bumblebee.obs@gmail.com

- Update to 495.29.05

------------------------------------------------------------------
Sat 25 Sep 15:57:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 470.74

* Fixed a bug that could cause GPU applications to exit when
   resuming from suspend.
 * Fixed a regression which resulted in very-high system memory
   usage for Direct3D 12 games when run through vkd3d-proton.
 * Added an application profile to disable FXAA for Firefox to
   prevent visual corruption.
 * Fixed a Vulkan performance regression that affected rFactor2.
 * Fixed a bug that could cause the /proc/driver/nvidia/suspend
   power management interface to fail to preserve and restore
   video memory allocations when the NVreg_TemporaryFilePath
   module parameter for nvidia.ko specified an invalid path.
 * Fixed a bug that caused nvidia-drm.ko to crash when loading
   with DRM-KMS enabled (modeset=1) on Linux v5.14.

------------------------------------------------------------------
Sat 25 Sep 15:48:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 470.63.01

* Added support for the following GPUs:
        NVIDIA RTX A2000

* Added support for the VK_KHR_wayland_surface extension.
 * Fixed a Vulkan performance regression that affected rFactor2.

------------------------------------------------------------------
Sat 25 Sep 14:48:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 470.57.02

* Added support for the following GPUs:
        GeForce RTX 3070 Ti
        GeForce RTX 3080 Ti

* Updated the nvidia-settings command line interface to confirm
   successful assignment of string attributes. This makes the
   behavior more consistent with other types of attribute
   assignments.
 * Fixed a bug that could cause flickering in Blender and Steam
   when running on Xwayland.
 * Fixed a bug that caused GTK+3 applications using the GtkGLArea
   class to crash when running on Xwayland.
 * Added a workaround for DOOM Eternal, which avoids an
   application bug where Vulkan swapchain recreation events are
   not properly handled. On desktops like GNOME where the window
   is initially redirected to the compositor, this may prevent
   the game from flipping (and thus enabling G-SYNC).
 * Added a workaround for Far Cry 5 when run through DXVK, which
   avoids a shader race condition bug that was previously exposed
   by new compiler optimizations.
 * Increased the maximum limit on concurrent OpenGL contexts. This
   limit was previously constrained by a fixed-size internal driver
   resource, and is now constrained by available system memory.
 * Applications that exceed the maximum limit on concurrent
   OpenGL contexts will now receive a BadAlloc X error rather than
   crashing.
 * Fixed a bug that could cause the X server to crash upon shutdown
   with some configurations using GPU screens.
 * Fixed a bug that could cause rendering errors when displaying
   scaled MetaModes using the "Nearest" resampling method.
 * Fixed a bug that could cause OpenGL applications run in PID
   namespaces to hang upon exit, generating warnings such as the
   following in the X log: (WW) NVIDIA: Wait for channel idle timed
   out.
 * Added support for PRIME Display Offload where both the display
   offload source and display offload sink are driven by the
   NVIDIA X Driver.
 * Added support for PRIME Display Offload where the display
   offload source is AMDGPU.
 * Fixed a bug that could prevent the driver from applying
   application profiles when running applications through Proton
   or Wine on a PRIME Render Offload configuration.
 * Fixed a bug that could cause NvFBC's "direct capture" to crash
   the X server when certain GLX calls are made during a capture.
 * Removed usage of the sysctl(2) system call as a fallback for
   procfs in nvidia-installer. This system call has been deprecated
   since Linux 2.6.24, and has been removed completely with recent
   versions of Linux and glibc.
 * Added an NVIDIA NGX build for use with Proton and Wine. A new
   library, nvngx.dll, has been added to enable driver-side support
   for running Windows applications which make use of DLSS. Changes
   to Proton, Wine, and other third-party software are needed for
   this feature.
 * Added support for VK_QUEUE_GLOBAL_PRIORITY_REALTIME_EXT from
   the VK_EXT_global_priority extension. This enables support for
   asynchronous reprojection in SteamVR.
        VK_QUEUE_GLOBAL_PRIORITY_REALTIME_EXT is supported on
        Pascal GPUs and newer.
   Global priorities other than VK_QUEUE_GLOBAL_PRIORITY_MEDIUM_EXT
   require root privileges or the CAP_SYS_NICE capability. 
 * Added support for the VK_EXT_global_priority_query extension.
 * Added the nvidia-peermem.ko kernel module. This module provides
   Mellanox InfiniBand HCAs (Host Channel Adapters) direct
   peer-to-peer access access to NVIDIA GPU memory without need
   without needing to copy data to to host memory.
    See the chapter "GPUDirect RDMA Peer Memory Client" in the
    README for details.
 * Added support for the VK_EXT_provoking_vertex extension.
 * Initial support for hardware accelerated OpenGL and Vulkan
   rendering on Xwayland. See the chapter "OpenGL and Vulkan on
   Xwayland" in the README for details.
 * Fixed a bug that could cause intermittent corruption in
   Wolfenstein: Youngblood when using NVIDIA Kepler, Maxwell,
   Pascal, and Volta GPUs.
 * Fixed a bug that could cause games running with DXVK to crash
   with Xid 31 (MMU Fault) errors when using NVIDIA Pascal GPUs.
 * Added support for the VK_EXT_extended_dynamic_state2 extension.
 * Added support for the VK_EXT_color_write_enable extension.
 * Added support for the VK_EXT_vertex_input_dynamic_state extension.
 * Added support for the VK_EXT_ycbcr_2plane_444_formats extension.
 * Added support for the VK_NV_inherited_viewport_scissor extension.
 * NvFBC's "direct capture" mode no longer causes flipping to be
   disabled for applications being captured. G-SYNC can now also be
   used simultaneously with NvFBC direct capture.
 * Deprecated NvIFROpenGL support.Release 470 will be the last to
   support this functionality.NvIFROpenGL header files, samples and
   documentation were removed from the NVIDIA Capture SDK 7.1.9
   release.Future drivers will remove libnvidia-ifr.so and any other
   reference to NvIFROpenGL.
    For details please see:
    https://developer.nvidia.com/nvidia-video-codec-sdk
 * Fixed a bug that prevented Vulkan direct-to-display from working
   when DRM KMS is enabled.
 * Enabled the NVIDIA driver, by default, to attempt to initialize
   SLI when using GPUs with different amounts of video memory.
   Previously, this was only available when bit 1 was set in the
   "Coolbits" X config option.
 * Updated GPU fan control to be available by default in
   nvidia-settings and NV-CONTROL, for GPU boards that support
   programmable fan control. Previously, this was only available
   when bit 2 was set in the "Coolbits" X config option.
 * Fixed an issue where vkCreate{Graphics,Compute}Pipeline would
   sometimes crash when the shaders contained resources with
   no set/binding.
 * Fixed a memory fault in the Vulkan driver when using some
   smaller dimensions of sparse images.
 * Fixed an issue with vkCmdSetViewport when firstViewport is
   non-zero.
 * Fixed handling of
   VK_DESCRIPTOR_BINDING_VARIABLE_DESCRIPTOR_COUNT_BIT for
   variable size descriptor bindings.
 * Added gsp.bin firmware file which is used to offload the
   GPU initialization and management tasks on some GPUs. See the
   "GSP Firmware" chapter in the README for more information.
 * Worked around a bug in Meson builds of libglvnd 1.3.0 that
   caused the nvidia_icd.json file to be installed in the wrong
   location.

------------------------------------------------------------------
Thu 20 May 21:59:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 465.31

* Added support for the following GPUs:
        GeForce RTX 3050 Ti Laptop GPU
        GeForce RTX 3050 Laptop

* Fixed a bug that could cause AddressSanitizer to report a
   heap-buffer-overflow during initialization of the OpenGL and
   Vulkan libraries.

------------------------------------------------------------------
Fri  7 May 21:33:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 465.27

* Added support for the following GPUs:
        T600 Laptop GPU
        T1200 Laptop GPU
        RTX A5000 Laptop GPU
        RTX A4000 Laptop GPU
        RTX A3000 Laptop GPU
        RTX A2000 Laptop GPU

* Fixed a bug that could prevent a system from resuming from
   suspend when DisplayPort activity occurred while the system
   was suspended.
 * Fixed a regression that prevented eglQueryDevicesEXT from
   correctly enumerating GPUs on systems with multiple GPUs
   where access to the GPU device files was restricted for some
   GPUs.
 * Fixed a regression that could cause system hangs when
   changing display resolution on SLI Mosaic configurations.
 * Fixed a bug that could result in blank displays when driving
   multiple displays at the same resolution using active
   DisplayPort dongles.

------------------------------------------------------------------
Thu  29 Apr 21:33:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 465.24.02

* Added support for the following GPUs:
        RTX A4000
        RTX A5000

* Updated the nvidia-settings control panel to be more consistent
   about displaying layout controls which are only applicable for
   some displays or GPUs connected to the system.
 * Improved X11 DrawText() performance when rendering stippled text.
 * Fixed a bug that could prevent some hardware configurations with
   large numbers of displays connected to the same GPU from working
   correctly.
 * Fixed a bug that could cause multi-threaded GLX applications to
   hang while attempting to handle an XError.
 * Fixed a potential crash in the Vulkan driver when clearing
   images with multiple layers.
 * Fixed a bug with the host-visible device-local memory heap,
   where if an allocation failed due to space constraints, it could
   cause the application to crash on future Vulkan function calls.
 * Fixed corruption in the Vulkan driver that sometimes occurred
   with shadow rendering with image arrays.
 * Added support for the VK_KHR_synchronization2 extension.
 * Added support for the VK_KHR_workgroup_memory_explicit_layout
   extension.
 * Added support for the VK_KHR_zero_initialize_workgroup_memory
   extension.
 * Added support for linear images for use with host-visible video
   memory in Vulkan.
 * Fixed an issue with OpenGL where imported Vulkan buffers would
   fail with GL_OUT_OF_MEMORY when marked as resident.
 * Fixed a bug that caused the NVIDIA driver to retain an incorrect
   memory mapping of the UEFI system console when booting with the
   kernel parameter pci=realloc. This could cause the console to
   corrupt memory in use by the NVIDIA driver, and vice versa.
 * Runtime D3 Power Management is now enabled by default on
   supported notebook systems with Ampere or newer GPUs. See the
   chapter titled "PCI-Express Runtime D3 (RTD3) Power Management"
   in the README for further details.
 * Updated the .run package installer to install and enable the
   nvidia-suspend.service, nvidia-hibernate.service, and
   nvidia-resume.service systemd units. These units are used when
   the NVreg_PreserveVideoMemoryAllocations=1 nvidia module parameter
   is specified to provide advanced suspend, hibernate, and resume
   functionality.
   See the chapter titled "Configuring Power Management Support"
   in the README for more information.
   This functionality can be disabled by passing the --no-systemd
   parameter to the installer.
 * Updated the NVIDIA X driver to allow OpenGL applications running
   on an X server that has left the active virtual terminal (VT)
   to continue running on the GPU, but with a limited frame rate.
   This functionality is only enabled when the
   NVreg_PreserveVideoMemoryAllocations=1 nvidia module parameter
   is enabled.
 * Fix a Vulkan clamping bug where fragment depth values would
   not be clamped to the range [0,1] if
   VK_EXT_depth_range_unrestricted was not enabled.
 * Fix a bug related to SPIR-V 1.4 non-Input/Output entry point
   variables.
 * Fixed a bug in compilation of SPIR-V intersection shaders when
   modules with multiple entry points are used.

------------------------------------------------------------------
Mon  05 Apr 21:33:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 465.19.01

* Updated the nvidia-settings control panel to be more consistent
   about displaying layout controls which are only applicable for
   some displays or GPUs connected to the system.
 * Improved X11 DrawText() performance when rendering stippled text.
 * Fixed a bug that could prevent some hardware configurations with
   large numbers of displays connected to the same GPU from working
   correctly.
 * Fixed a bug that could cause multi-threaded GLX applications to
   hang while attempting to handle an XError.
 * Fixed a potential crash in the Vulkan driver when clearing
   images with multiple layers.
 * Fixed a bug with the host-visible device-local memory heap,
   where if an allocation failed due to space constraints, it could
   cause the application to crash on future Vulkan function calls.
 * Fixed corruption in the Vulkan driver that sometimes occurred
   with shadow rendering with image arrays.
 * Added support for the VK_KHR_synchronization2 extension.
 * Added support for the VK_KHR_workgroup_memory_explicit_layout
   extension.
 * Added support for the VK_KHR_zero_initialize_workgroup_memory
   extension.
 * Added support for linear images for use with host-visible video
   memory in Vulkan.
 * Fixed an issue with OpenGL where imported Vulkan buffers would
   fail with GL_OUT_OF_MEMORY when marked as resident.
 * Fixed a bug that caused the NVIDIA driver to retain an incorrect
   memory mapping of the UEFI system console when booting with the
   kernel parameter pci=realloc. This could cause the console to
   corrupt memory in use by the NVIDIA driver, and vice versa.
 * Runtime D3 Power Management is now enabled by default on
   supported notebook systems with Ampere or newer GPUs. See the
   chapter titled "PCI-Express Runtime D3 (RTD3) Power Management"
   in the README for further details.
 * Updated the .run package installer to install and enable the
   nvidia-suspend.service, nvidia-hibernate.service, and
   nvidia-resume.service systemd units. These units are used when
   the NVreg_PreserveVideoMemoryAllocations=1 nvidia module
   parameter is specified to provide advanced suspend, hibernate,
   and resume functionality.
    See the chapter titled "Configuring Power Management Support"
    in the README for more information.
    This functionality can be disabled by passing the --no-systemd
    parameter to the installer.
    Updated the NVIDIA X driver to allow OpenGL applications
    running on an X server that has left the active virtual
    terminal (VT) to continue running on the GPU, but with a
    limited frame rate.
    This functionality is only enabled when the
    NVreg_PreserveVideoMemoryAllocations=1 nvidia module
    parameter is enabled.
 * Fix a Vulkan clamping bug where fragment depth values would not
   be clamped to the range [0,1] if
   VK_EXT_depth_range_unrestricted was not enabled.
 * Fix a bug related to SPIR-V 1.4 non-Input/Output entry point
   variables.
 * Fixed a bug in compilation of SPIR-V intersection shaders when
   modules with multiple entry points are used.

------------------------------------------------------------------
Mon  05 Apr 20:51:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 460.67

* Fixed a bug where using ray tracing extensions on multi-GPU
   setups could result in application instability if the GPUs did
   not match.
 * Fixed an issue that prevented G-SYNC from working properly
   after a mode switch on Kepler-based GPUs.
 * Fixed a driver installation failure on Linux kernel 5.11
   release candidates, where the NVIDIA kernel module failed to
   build with error "error: implicit declaration of function
   'sys_close'".
 * Fixed a bug where vkCreateSwapchain could cause the X Server
   to crash when an invalid imageFormat was provided.
 * Fixed a driver installation failure on Linux kernel 5.11
   release candidates, where the NVIDIA kernel module failed to
   build with error "fatal error: asm/kmap_types.h: No such file
   or directory".

------------------------------------------------------------------
Sun  14 Mar 01:51:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 460.56

* Added support for the following GPUs:
        GeForce RTX 3060
 * Fixed a bug with indexed ray payloads in Vulkan.
 * Fixed a bug where calls to vkCreateDevice could fail on
   Ampere GPUs when ray tracing extensions were enabled and the
   application was running within the Steam Linux Runtime.
 * Fixed a regression that could cause display corruption when
   using a scaled resolution after resuming from power management
   suspend.

------------------------------------------------------------------
Sat  13 Feb 15:46:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 460.39

* Added support for the following GPUs:
        GeForce RTX 3080 Laptop GPU
        GeForce RTX 3070 Laptop GPU
        GeForce RTX 3060 Laptop GPU
        GeForce GT 1010
 * Updated the NVIDIA driver to restore functionality of some
   features, including runtime power management, hotplugging
   audio-capable display devices, and S0ix-based system suspend,
   with recent kernels such as Linux 5.10.
 * Fixed a bug that caused bindless texture samplers to be
   incorrectly counted towards the
   MAX_COMPUTE_TEXTURE_IMAGE_UNITS limit.
 * Fixed a bug that could cause the GPU to hang when attempting
   to perform link training on an HDMI 2.1 Fixed Rate Link (FRL)
   display, while the display is powered off.
 * Fixed a bug that could intermittently cause NvFBC applications
   to fail with the error message "Unable to send exported fds".

------------------------------------------------------------------
Sat  9 Jan 18:21:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 460.32.03

* Added support for the following GPUs:
        RTX A6000 
 * Fixed a bug that could cause detailed timing information for
   displays with a large number of detailed timings to be
   truncated in the X log.
 * Fixed a bug that prevented scaled display resolutions configured
   via the nvidia-settings control panel from being reported by
   RandR.
 * Fixed a bug with the SLI Mosaic Mode configuration dialog in
   nvidia-settings that left displays enabled when they were not
   needed in the selected configuration.
 * Added support for RandR rotation and reflection while using an
   NVIDIA-driven display as a PRIME Display Offload sink.
 * Added support for "Reverse PRIME Bypass", an optimization that
   bypasses the bandwidth overhead of PRIME Render Offload and PRIME
   Display Offload in conditions where a render offload application
   is fullscreen, unredirected, and visible only on a given
   NVIDIA-driven PRIME Display Offload output. Use of the
   optimization is reported in the X log when verbose logging is
   enabled in the X server.
 * Add support for the VK_KHR_acceleration_structure extension.
 * Add support for the VK_KHR_ray_tracing_pipeline extension.
 * Add support for the VK_KHR_ray_query extension.
 * Add support for the VK_KHR_pipeline_library extension.
 * Add support for the VK_KHR_deferred_host_operations extension.
 * Removed the MetaMode string truncation warning for older X Servers
   when saving the X Configuration file from nvidia-settings.
 * Add support for the VK_NV_fragment_shading_rate_enums extension.
 * Fixed a bug where copying from an X11 pixmap to an RGB overlay
   window would exhibit corruption.
 * Fixed an issue with VK_ACCESS_MEMORY_READ_BIT and
   VK_ACCESS_MEMORY_WRITE_BIT when used as part of a render pass.
 * Add support for the VK_KHR_fragment_shading_rate extension.
 * Add support for the VK_KHR_shader_terminate_invocation extension.
 * Reduce host memory consumption for descriptor memory in cases
   where thep Next chain contains a structure of type
   VK_STRUCTURE_TYPE_DESCRIPTOR_SET_VARIABLE_DESCRIPTOR_COUNT_ALLOCATE_INFO.
 * Increased the default size for new OpenGL/Vulkan Shader Disk Cache
   location to 1024MB. Note that caches with paths containing
   "/.nv/ will continue to use the previous default of 128MB unless
   the size is manually overridden. For more information see the
   "OpenGL Shader Disk Cache" section in the "Specifying OpenGL
   Environment Variable Settings" chapter of the README.
 * Changed the default location for new OpenGL/Vulkan Shader Disk Caches.
   If the location is not manually overridden and a cache is detected
   in the previous default location, that location will be used instead
   of the new default location. For more information see the
   "OpenGL Shader Disk Cache" section in the "Specifying OpenGL
   Environment Variable Settings" chapter of the README.
 * Add support for the VK_EXT_shader_image_atomic_int64 extension.
 * Add support for the VK_KHR_copy_commands2 extension.
 * Allow importing cached memory via VK_EXT_external_memory_host.
 * Removed support for the following deprecated frame lock NV-CONTROL
   attributes:
        NV_CTRL_FRAMELOCK_MASTER
        NV_CTRL_FRAMELOCK_SLAVES
        NV_CTRL_FRAMELOCK_MASTERABLE
        NV_CTRL_FRAMELOCK_SLAVEABLE 
 * Default AllowEmptyInitialConfiguration to True such that the
   NVIDIA X driver succeeds when launching the X server even if
   there are no display devices connected.
 * RRGetCrtcInfo will now return Rotate_0 instead of 0 as the active
   rotation for disabled CRTCs.
 * Improved the NVIDIA VDPAU implementation of
   VdpVideoSurfaceGetBitsYCbCr and VdpVideoSurfacePutBitsYCbCr when
   using planar or semi-planar formats.  This helps applications
   that transfer data between VDPAU video surfaces and system
   memory.
 * Added initial experimental support for S0ix-based system
   suspend (suspend-to-idle). This feature is platform and GPU
   dependent, so the feature will be disabled by default. To
   enable this feature, refer to the 'powermanagement' section
   of the README.
 * Fixed an issue where Vulkan applications would fail to
   initialize if the connected X11 Server did not expose support
   for GLX.
 * Improved the memory allocation strategy in nvidia-modeset.ko
   to reduce the likelihood of out-of-memory errors, which
   typically manifest as "page allocation failure" messages in
   the kernel log.

-----------------------------------------------------------------
Sat  9 Jan 18:01:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 460.27.04

------------------------------------------------------------------
Sat  9 Jan 17:15:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 455.45.01

* Added support for the following GPUs:
        GeForce RTX 3060 Ti
 * Kernel 5.9 support
 * Fixed a bug in a Vulkan blending optimization that could produce incorrect results. Some of the Vulkan titles affected by this bug were:
        Life is Strange 2
        Shadow of the Tomb Raider
 * Fixed an issue that caused Vulkan swapchain creation to fail for full-screen windows when a G-SYNC monitor is connected.

------------------------------------------------------------------
Sat  9 Jan 16:53:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 455.38

* Added support for the following GPUs:
        GeForce RTX 3070
 * Fixed a bug in nvidia-settings that caused the SLI Mosaic
   Configuration dialog to position available displays incorrectly
   when enabling SLI Mosaic.
 * Added support for using an NVIDIA-driven display as a PRIME
   Display Offload sink with a PRIME Display Offload source driven
   by the xf86-video-intel driver.
 * Fixed a bug in a Vulkan barrier optimization that allowed some
   back-to-back copies to run unordered.
 * Fixed a performance regression in the NVIDIA X driver which
   affected some X11 RENDER extension use cases.
 * Added AMD Secure Memory Encryption compatibility.
 
------------------------------------------------------------------
Sat  9 Jan 16:53:00 CET 2021 - bumblebee.obs@gmail.com

- Update to 455.28

* Added support for the following GPUs:
        GeForce RTX 3080
        GeForce RTX 3090
        GeForce MX450
 * Fixed a bug that caused X to crash when the NVIDIA RandR
   provider was disabled while using an NVIDIA-driven display
   as a PRIME Display Offload sink.
 * Moved layout configuration of SLI Mosaic displays in
   nvidia-settings from its own dedicated page to a dialog
   available on the X Server Display Configuration page.
 * Fixed a bug that prevented 8K displays from being used in
   portrait orientation on Pascal and earlier GPUs.
 * Fixed a bug which caused excessive CPU usage in Vulkan
   applications which create a large number of VkFence objects.
   This was particularly prevalent in the Steam Play title Red
   Dead Redemption 2.
 * Added support for a new device-local VkMemoryType which is
   host-coherent and host-visible. This may result in improved
   performance in some applications. Applications which are
   known to benefit from this new VkMemoryType include: DXVK
   Title DiRT Rally 2.0, Steam Play Title DOOM: Eternal, and
   DXVK title World of Warcraft.
 * Fixed a bug that caused WebKit-based applications to crash
   when running on Wayland.
 * Fixed a bug that led to display corruption at some resolutions
   when using an NVIDIA-driven display as a PRIME Display Offload
   sink.
 * Fixed a bug in a SPIR-V optimization that may cause conditional
   blocks to not execute.
 * Fixed a bug where calls to vkGetRandROutputDisplayEXT with
   unexpected inputs would generate X11 protocol errors.
   (https://bugs.winehq.org/show_bug.cgi?id=49407)
 * Fixed a small memory leak during exit of the NVIDIA EGL
   driver.
 * Implemented support for the NVIDIA NGX Updater. See the
   "NGX" chapter in the README for information on how to configure
   this feature.
 * Removed support for the SLI modes "SFR", "AFR", and "AA".
   SLI Mosaic, Base Mosaic, GL_NV_gpu_multicast, and
   GLX_NV_multigpu_context are still supported.
 * Updated Base Mosaic support on GeForce to allow a maximum of
   five simultaneous displays, rather than three.
 * Fixed several synchronization bugs that could momentarily
   lock up the X server when moving/resizing/focusing OpenGL
   and Vulkan windows when PRIME Sync was enabled.
 * Added NVIDIA VDPAU driver support for decoding VP9 10- and
   12-bit bitstreams.Note that VDPAU's presentation pipeline and
   OpenGL-VDPAU interop does not support 10- and 12-bit video
   surfaces yet. See the "VDPAU Support" appendix in the README
   for supported decoder profiles.
 * Fixed a bug that could cause dual-link DVI to be driven over
   a connector that only supports single-link DVI, when
   "NoMaxPClkCheck" is specified in the "ModeValidation"
   X configuration option. Note this fix may cause behavioral
   changes for configurations using this option.
 * Fixed a bug where glGetGraphicsResetStatusARB would incorrectly
   return GL_PURGED_CONTEXT_RESET_NV immediately after application
   start-up if the system had previously been suspended.
 * Fixed a regression that allowed displays to enter DPMS mode
   even when DPMS is disabled in the X server settings.
 * Updated nvidia-settings to allow continued interaction with
   other pages and help content while editing application
   profiles.

------------------------------------------------------------------
Sun 20 Sep 20:22:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 455.23.04

* Added support for the following GPUs:
        GeForce RTX 3080
        GeForce RTX 3090
        GeForce MX450
 * Fixed a bug that prevented 8K displays from being used in
   portrait orientation on Pascal and earlier GPUs.
 * Fixed a bug which caused excessive CPU usage in Vulkan
   applications which create a large number of VkFence objects.
   This was particularly prevalent in the Steam Play title
   Red Dead Redemption 2.
 * Added support for a new device-local VkMemoryType which is
   host-coherent and host-visible. This may result in improved
   performance in some applications. Applications which are
   known to benefit from this new VkMemoryType include:
   DXVK Title DiRT Rally 2.0, Steam Play Title DOOM: Eternal,
   and DXVK title World of Warcraft.
 * Fixed a bug that caused WebKit-based applications to crash
   when running on Wayland.
 * Fixed a bug that led to display corruption at some
   resolutions when using an NVIDIA-driven display as a PRIME
   Display Offload sink.
 * Fixed a bug in a SPIR-V optimization that may cause
   conditional blocks to not execute.
 * Fixed a bug where calls to vkGetRandROutputDisplayEXT
   with unexpected inputs would generate X11 protocol errors.
   (https://bugs.winehq.org/show_bug.cgi?id=49407)
 * Fixed a small memory leak during exit of the
   NVIDIA EGL driver.
 * Implemented support for the NVIDIA NGX Updater. See the
   "NGX" chapter in the README for information on how to
   configure this feature.
 * Removed support for the SLI modes "SFR", "AFR", and "AA".
   SLI Mosaic, Base Mosaic, GL_NV_gpu_multicast, and
   GLX_NV_multigpu_context are still supported.
 * Updated Base Mosaic support on GeForce to allow a maximum
   of five simultaneous displays, rather than three.
 * Fixed several synchronization bugs that could momentarily
   lock up the X server when moving/resizing/focusing OpenGL
   and Vulkan windows when PRIME Sync was enabled.
 * Added NVIDIA VDPAU driver support for decoding VP9 10- and
   12-bit bitstreams. Note that VDPAU's presentation pipeline
   and OpenGL-VDPAU interop does not support 10- and 12-bit
   video surfaces yet. See the "VDPAU Support" appendix in the
   README for supported decoder profiles.
 * Fixed a bug that could cause dual-link DVI to be driven over
   a connector that only supports single-link DVI, when
   "NoMaxPClkCheck" is specified in the "ModeValidation"
   X configuration option.  Note this fix may cause behavioral
   changes for configurations using this option.
 * Fixed a regression that allowed displays to enter DPMS mode
   even when DPMS is disabled in the X server settings.
 * Updated nvidia-settings to allow continued interaction with
   other pages and help content while editing application
   profiles.

------------------------------------------------------------------
Sun 20 Sep 20:09:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 450.66

* Added support for the following GPUs:

EIZO Quadro MED-XN31LP
        EIZO Quadro MED-XN50LP
        EIZO Quadro MED-XN51LP
        EIZO Quadro MED-XN70
        EIZO Quadro MED-XN71
        EIZO Quadro MED-XN72
        EIZO Quadro MED-XN90
        EIZO Quadro MED-XN91
        EIZO Quadro MED-XN92
        Matrox D-Series D1450
        Matrox D-Series D1480
 * Fixed triple buffering support of Vulkan X11 swapchains when
   applications are syncing to vblank.

------------------------------------------------------------------
Sun 20 Sep 19:49:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 450.57

* Added support for Vulkan direct-to-display on DisplayPort
   displays which are connected via DisplayPort
   Multi-Stream Transport (DP-MST).
 * Added a new documentation file, supported-gpus.json, which
   exposes a machine-readable list of supported GPUs and features.
 * Added an implementation of glNamedBufferPageCommitmentARB,
   which was missing from the NVIDIA driver's support for the
   GL_ARB_sparse_buffer extension.
 * Fixed a bug that could cause a KDE Plasma session to crash
   when running under Wayland.
 * Fixed a bug that could cause some Swap Group configurations
   to present at half of the display refresh rate.
 * Added a new Connector-N display connector name alias type,
   with a unique alias assigned to each physical display
   connector on a GPU. See the README for more information.
 * Fixed a bug that prevented X11 EGL displays from being
   reinitialized.
 * The 450 driver series is the last that supports
   NvFBC's NVFBC_CAPTURE_TO_HW_ENCODER capture interface,
   which has been deprecated since NVIDIA Capture SDK 6.0
   released in 2017. Future NVIDIA drivers after the 450 series
   will return NVFBC_ERR_UNSUPPORTED if that capture interface
   is requested. The recommended way to encode captured frames
   with NVENC is by using the NVIDIA Video Codec SDK.
   See: https://developer.nvidia.com/nvidia-video-codec-sdk
 * Implemented support for NVIDIA NGX. A new library,
   libnvidia-ngx.so, has been added to support the new
   functionality. This new library is needed by applications
   which link against any of the following SDKs:

NVIDIA DLSS SDK 
        NVIDIA NGX SDK 
 * Fixed a bug which caused Vulkan applications to leak file
   descriptors when destroying Vulkan instances.
 * Added a fallback presentation path for PRIME Render Offload
   configurations where the DRI3 and/or Present extension are
   unavailable.
 * Fixed a bug where vkCreateSampler would fail with no
   borderColor data, even though it wasn't needed.
 * Fixed a bug where vkUpdateDescriptorSetWithTemplate would
   ignore the stride parameter for some VkDescriptorType values.
 * Fixed a bug causing the Plasma desktop panel to freeze when
   compositing is disabled
   (https://bugs.kde.org/show_bug.cgi?id=353983)
 * Improved Vulkan device enumeration under an X.Org X server
   environment. See the "Known Issues" in the README for more
   information.
 * Fixed a visual glitch of Vulkan applications when they stop
   flipping due to a window change, such as when alt-tab is
   used to change window focus.
 * Fixed a bug where XGetImage requests would return stale data
   for flipping Vulkan applications. In particular, this fixes
   screen-scraping tools such as VNC and import.
 * Removed libnvidia-fatbinaryloader.so from the driver package.
   This functionality is now built into other driver libraries.
 * Extended the dynamic runtime power management support in the
   NVIDIA driver to shut off power to video memory under certain
   conditions. See the chapter titled "PCI-Express Runtime D3
   (RTD3) Power Management" in the README for more information.
 * Added HEVC 10/12 bit "decode only" support to
   the NVIDIA VDPAU driver. Note that VDPAU's presentation
   pipeline and OpenGL-VDPAU interop does not support 10- and
   12-bit video surfaces yet. See the "VDPAU Support" appendix
   in the README for supported HEVC decoder profiles.
 * Added support for Image Sharpening for OpenGL and Vulkan
   applications
 * Added new VdpYCbCrFormats VDP_YCBCR_FORMAT_Y_U_V_444_16,
   VDP_YCBCR_FORMAT_P010 and VDP_YCBCR_FORMAT_P016 for accessing
   16-bit surfaces via VdpVideoSurfaceGetBitsYCbCr() and
   VdpVideoSurfacePutBitsYCbCr() in the NVIDIA VDPAU driver.
 * Added support to create 16-bit video surfaces in
   the NVIDIA VDPAU driver.
 * Modified nvidia-persistenced and libnvidia-ml (NVML) to
   use libtirpc for communication instead of relying on the
   deprecated glibc RPC implementation.
 * Enabled GPU screens by default on X.Org xserver version
   1.20.7 and higher.
 * Fixed a bug where rendering in a separate user namespace
   (unshare -U) would show black window and produce Xid 13 errors.
 * Removed support for "IgnoreDisplayDevices" X configuration
   option.
 * Added support for PRIME Synchronization when using displays
   driven by the x86-video-amdgpu driver as PRIME display
   offload sinks.
 * Added support for displays connected to NVIDIA GPUs to act
   as PRIME display offload sinks, also known as "Reverse PRIME".
   See the chapter titled "Offloading Graphics Display with
   RandR 1.4" in the README for additional information.
 * Removed 'libGL.la' libtool archive from the install package.
 * Fixed a bug that caused a brief orange flash on some
   platforms when a display mode is being set.
 * Fixed a bug that could cause the X server to crash when
   using large cursor images with PRIME display offloading.
 * Fixed an interaction problem with 5.4 and newer Linux
   kernels that caused a performance regression when allocating
   system memory.
 * Fixed a driver installation failure on Linux kernel 5.8 release
   candidates, where the NVIDIA kernel module failed to build with
   error "'struct mm_struct' has no member named 'mmap_sem'".
 * Fixed a driver installation failure on Linux kernel 5.8 release
   candidates, where the NVIDIA kernel module failed to build with
   error "too many arguments to function '__vmalloc'".

------------------------------------------------------------------
Sun 20 Sep 17:51:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 450.51

* Added support for Vulkan direct-to-display on DisplayPort
   displays which are connected via DisplayPort Multi-Stream
   Transport (DP-MST).
 * Added a new documentation file, supported-gpus.json, which
   exposes a machine-readable list of supported GPUs and features.
 * Added an implementation of glNamedBufferPageCommitmentARB, which
   was missing from the NVIDIA driver's support for
   the GL_ARB_sparse_buffer extension.
 * Fixed a bug that could cause a KDE Plasma session to crash when
   running under Wayland.
 * Fixed a bug that could cause some Swap Group configurations to
   present at half of the display refresh rate.
 * Added a new Connector-N display connector name alias type, with
   a unique alias assigned to each physical display connector on
   a GPU. See the README for more information.
 * Fixed a bug that prevented X11 EGL displays from being
   reinitialized.
 * The 450 driver series is the last that supports NvFBC's
   NVFBC_CAPTURE_TO_HW_ENCODER capture interface, which has been
   deprecated since NVIDIA Capture SDK 6.0 released in 2017.
   Future NVIDIA drivers after the 450 series will return
   NVFBC_ERR_UNSUPPORTED if that capture interface is requested.
   The recommended way to encode captured frames with NVENC is
   by using the NVIDIA Video Codec SDK.
   See: https://developer.nvidia.com/nvidia-video-codec-sdk
 * Implemented support for NVIDIA NGX. A new library,
   libnvidia-ngx.so, has been added to support the new functionality.
   This new library is needed by applications which link against
   any of the following SDKs:

NVIDIA DLSS SDK
        NVIDIA NGX SDK
 * Fixed a bug which caused Vulkan applications to leak file
   descriptors when destroying Vulkan instances.
 * Added a fallback presentation path for PRIME Render Offload
   configurations where the DRI3 and/or Present extension are
   unavailable.
 * Fixed a bug where vkCreateSampler would fail with no borderColor
   data, even though it wasn't needed.
 * Fixed a bug where vkUpdateDescriptorSetWithTemplate would
   ignore the stride parameter for some VkDescriptorType values.
 * Fixed a bug causing the Plasma desktop panel to freeze when
   compositing is disabled
   (https://bugs.kde.org/show_bug.cgi?id=353983)
 * Improved Vulkan device enumeration under an X.Org X server
   environment. See the "Known Issues" in the README for more
   information.
 * Fixed a visual glitch of Vulkan applications when they stop
   flipping due to a window change, such as when alt-tab is used
   to change window focus.
 * Fixed a bug where XGetImage requests would return stale data
   for flipping Vulkan applications. In particular, this fixes
   screen-scraping tools such as VNC and import.
 * Removed libnvidia-fatbinaryloader.so from the driver package.
   This functionality is now built into other driver libraries.
 * Extended the dynamic runtime power management support in the
   NVIDIA driver to shut off power to video memory under certain
   conditions.
   See the chapter titled "PCI-Express Runtime D3 (RTD3) Power
   Management" in the README for more information.
 * Added HEVC 10/12 bit "decode only" support to the
   NVIDIA VDPAU driver.
   Note that VDPAU's presentation pipeline and OpenGL-VDPAU
   interop does not support 10- and 12-bit video surfaces yet.
   See the "VDPAU Support" appendix in the README for supported
   HEVC decoder profiles.
 * Added support for Image Sharpening for OpenGL and Vulkan
   applications
 * Added new VdpYCbCrFormats VDP_YCBCR_FORMAT_Y_U_V_444_16,
   VDP_YCBCR_FORMAT_P010 and VDP_YCBCR_FORMAT_P016 for accessing
   16-bit surfaces via VdpVideoSurfaceGetBitsYCbCr() and
   VdpVideoSurfacePutBitsYCbCr() in the NVIDIA VDPAU driver.
 * Added support to create 16-bit video surfaces in the
   NVIDIA VDPAU driver.
 * Modified nvidia-persistenced and libnvidia-ml (NVML) to
   use libtirpc for communication instead of relying on the
   deprecated glibc RPC implementation.
 * Enabled GPU screens by default on X.Org xserver version
   1.20.7 and higher.
 * Fixed a bug where rendering in a separate user namespace
   (unshare -U) would show black window and produce Xid 13 errors.
 * Removed support for "IgnoreDisplayDevices" X configuration
   option.
 * Added support for PRIME Synchronization when using displays
   driven by the x86-video-amdgpu driver as PRIME display
   offload sinks.
 * Added support for displays connected to NVIDIA GPUs to act as 
   PRIME display offload sinks, also known as "Reverse PRIME".
   See the chapter titled "Offloading Graphics Display with
   RandR 1.4" in the README for additional information.
 * Removed 'libGL.la' libtool archive from the install package.
 
------------------------------------------------------------------
Sun 20 Sep 17:40:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.100

* Added a workaround for some Pascal based notebooks, where the
   GPU could fall off the bus when idle.
 * Added support for the following GPUs:

GeForce GTX 1650 Ti
    GeForce GTX 1650 Ti with Max-Q Design
    GeForce RTX 2060 with Max-Q Design
    Quadro T1000 with Max-Q Design

* Added new "Connector-N" display device aliases to
   the X driver's X configuration option parser.  This is useful
   in conjunction with the "ConnectedMonitor" X configuration
   option, for emulating the presence of connected monitors
   without knowing what specific connectors are available.
   See the "Display Device Names" appendix in the README for
   details.

------------------------------------------------------------------
Sun 20 Sep 17:24:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.82

* Added a workaround for Steam Play title DOOM Eternal, which
   overrides application requested memory locations, to ensure
   performance-critical resources be placed in video memory.
 * Allow presenting from queue families which only expose
   VK_QUEUE_COMPUTE_BIT when using XCB in addition to Xlib
   surfaces.
 * Fixed a bug that caused render-offloaded applications to
   crash on exit.
 * Fixed a driver installation failure on Linux kernel 5.6 release
   candidates, where the NVIDIA kernel module failed to build with
   error "implicit declaration of function 'timespec_to_ns'".
 * Fixed a driver installation failure on Linux kernel 5.6 release
   candidates, where the NVIDIA kernel module failed to build with
   error "implicit declaration of function 'getrawmonotonic'".
 * Fixed a driver installation failure on Linux kernel 5.6 release
   candidates, where the NVIDIA kernel module failed to build with
   error "implicit declaration of function 'timespec_to_ns'".
 * Fixed a driver installation failure on Linux kernel 5.6 release
   candidates, where the NVIDIA kernel module failed to build with
   error "implicit declaration of function 'getrawmonotonic'".
 * Fixed a driver installation failure on Linux kernel 5.6 release
   candidates, where the NVIDIA kernel module failed to build with
   error "implicit declaration of function 'getnstimeofday'".
 * Fixed a driver installation failure on Linux kernel 5.6 release
   candidates, where the NVIDIA kernel module failed to build with
   error "dereferencing pointer to incomplete
   type 'struct timeval'".
 * Fixed a driver installation failure on Linux kernel 5.6 release
   candidates, where the NVIDIA kernel module failed to build with
    error "implicit declaration of function 'jiffies_to_timespec'".
 * Fixed driver installation failure on Linux kernel 5.6 release
   candidates, where the NVIDIA kernel module failed to build with
   error "passing argument 4 of 'proc_create_data' from
   incompatible pointer type".

------------------------------------------------------------------
Mon  6 Apr 19:30:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.64

* Added support for the following GPUs:

GeForce MX330
    GeForce MX350

* Fixed a regression that allowed displays to enter DPMS mode
   even when DPMS is disabled in the X server settings.
 * Fixed driver installation failure on Linux kernel 5.6 release
   candidates, where the NVIDIA kernel module failed to build
   with error "implicit declaration of function 'ioremap_nocache'".

------------------------------------------------------------------
Mon  6 Apr 19:25:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.59

* Disabled frame rate limiting for configurations without
   active displays when HardDPMS is enabled.
 * Restricted the maximum number of GPU Screens to one GPU
   Screen per GPU device, to prevent X from crashing when more
   than one GPU Screen is configured for a single GPU device.
 * Fixed a bug that could cause the X server to crash while
   exiting DPMS with HardDPMS enabled.
 * Added a default filename when saving the Display Configuration
   file in nvidia-settings if an existing configuration file is
   not detected.
 * Added support for audio over DisplayPort Multi-Stream. This
   support requires Linux kernel version 5.5 or newer.
 * Updated the NVIDIA driver to allow NVIDIA High Definition Audio
   (HDA) controllers to respond to display hotplug events while
   the HDA is runtime-suspended.
 * Fixed a bug that caused DXVK titles to endlessly loop during
   shader compilation if no OpSource instruction was present.
 * Add PRIME Synchronization support for Linux kernel 5.4 and
   newer.

------------------------------------------------------------------
Mon  6 Jan 23:15:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.44

* Added support for the following GPU:
        Quadro T2000 with Max-Q Design
 * Added support for the __GL_SYNC_DISPLAY_DEVICE environment
   variable for Vulkan applications.
 * Fixed a bug that caused applications running directly on a
   display (such as VR HMDs) to tear when a G-SYNC or G-SYNC
   Compatible monitor is plugged in the system.
 * Fixed a bug in an error handling path that could cause a
   kernel crash while loading nvidia.ko.
 * Fixed driver installation failure on Oracle Linux 7.7 systems,
   where the NVIDIA kernel module failed to build with error
   "unknown type name 'vm_fault_t'".

------------------------------------------------------------------
Mon  6 Jan 23:05:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.36

* Added support for the following GPUs:
        GeForce GTX 1650 SUPER
 * Fixed graphical corruption that can occur when using glslang
   SPIR-V Generator Version <= 2.
 * Updated nvidia-settings to allow continued interaction with
   other pages and help content while editing application profiles.

------------------------------------------------------------------
Mon  6 Jan 22:05:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.31

* Added support for the following GPUs:
    GeForce GTX 1660 SUPER
 * Fixed a regression in the 440.26 driver that could prevent
   the NVIDIA kernel modules from building correctly on systems
   localized to a language other than English.
 * Fixed a bug that could cause the X server to crash when running
   applications using GLX indirect rendering.
 * Updated the Module.symvers sanity check, which is part of the
   NVIDIA kernel module build process, to accommodate the recent
   addition of a new field in the Module.symvers file format. This
   fixes the error "The Module.symvers file is missing [...]" seen
   during driver installation or DKMS rebuilds with Linux 5.4 RC
   kernels.
 * Fixed kernel module build problems with Linux kernel 5.4.0
   release candidates.
 * Updated nvidia-bug-report.sh to collect information about
   X server crashes from coredumpctl, when available.
 * Updated the nvidia-drm kernel module for compatibility with
   the removal of the DRIVER_PRIME flag in recent Linux kernel
   versions.
 * Updated the confirmation dialog box that is displayed when
   quitting the nvidia-settings control panel to report when
   there are pending configuration changes which will be lost if
   they are not applied or saved before quitting.
 * Enabled parallel GLSL shader linking by default; i.e., allow
   GL_ARB_parallel_shader_compile to work without first calling
   glMaxShaderCompilerThreadsARB().
 * Added support for HDMI 2.1 variable refresh rate (VRR)
   G-SYNC Compatible monitors on supported GPUs.For more details,
   see "Configuring Multiple Display Devices on One X Screen"
   in the README.
 * Added support for the GLX_NV_multigpu_context and
   GL_NV_gpu_multicast extensions.For more details, see the
   "Configuring SLI and Multi-GPU FrameRendering" chapter of the
   README, and the extension specifications:
    https://www.khronos.org/registry/OpenGL/extensions/NV/
      GLX_NV_multigpu_context.txt
    https://www.khronos.org/registry/OpenGL/extensions/NV/
      NV_gpu_multicast.txt
 * Fixed a bug that prevented Vulkan applications running on
   systems configured for SLI. Vulkan applications can now run
   while SLI is enabled; however, they will only be able to use
   a single GPU.
 * Simplified the nvidia-sleep.sh sample script to no longer
   depend on unreliable detection of the current VT through
   X server logs.
 * Added EGL support for PRIME render offload. Please see the
   PRIME Render Offload chapter in the README for configuration
   details.
 * Fixed a regression introduced in 435.19.02 that would cause
   some applications which use the VK_KHR_DISPLAY extension to
   result in a segmentation fault.
 * Enabled HardDPMS by default. See the README entry on the
   X configuration option "HardDPMS" for more information.
 * Fixed a bug which caused corruption in the following
   DXVK titles:
    Saints Row IV
    Saints Row: The Third
 * Added VP9 decode support to the NVIDIA VDPAU driver. See the
   VDPAU Support appendix in the README for supported VP9 decoder
   profiles.
 * Fixed a bug that could cause heapUsage values reported by
   VK_EXT_memory_budget to not immediately update after
   vkFreeMemory was called.
 * Changed GPU clock management strategy to more quickly ramp
   down clocks after a drop in GPU utilization.
 * Added X configuration option, "SidebandSocketPath", which
   controls the directory in which the X driver will create
   a pathname UNIX domain socket used to communicate with the
   NVIDIA OpenGL, Vulkan and VDPAU driver components.
 * The X driver will now create a fallback pathname UNIX domain
   socket in the directory specified by the "SidebandSocketPath"
   option, or /var/run by default, which will be used by other
   NVIDIA driver components if they are unable to connect to the
   default abstract socket.This fixes a bug where graphics
   applications run within a network namespace (which prevents
   the use of abstract sockets) were unable to take advantage of
   some driver features, such as G-Sync.
 * Fall back to system memory when video memory is full for some
   driver-internal allocations. This can help fix Xid 13 and
   Xid 31 cases in Vulkan applications when video memory is full.
 * Fixed a bug that could cause a blank screen on some
   DisplayPort monitors when logging in to GNOME, if the
   nvidia-drm kernel module parameter modeset=1 is specified.
 * Fixed a bug that prevented NVIDIA GPUs from entering the
   low-power D3 state when entering suspend-to-idle (s2idle).
   Note that on some systems this may expose an existing timing
   issue in the Linux kernel; see the "Known Issues and
   Workarounds" section of the "Configuring Power Management
   Support" chapter of the README for more details.

------------------------------------------------------------------
Mon  6 Jan 20:49:00 CET 2020 - bumblebee.obs@gmail.com

- Update to 440.26

* Added support for the following GPUs:
        GeForce GTX 1660 SUPER

* Updated the confirmation dialog box that is displayed when
   quitting the nvidia-settings control panel to report when there
   are pending configuration changes which will be lost if they
   are not applied or saved before quitting.          
           
 * Enabled parallel GLSL shader linking by default; i.e., allow
   GL_ARB_parallel_shader_compile to work without first calling
   glMaxShaderCompilerThreadsARB().
 * Added support for HDMI 2.1 variable refresh rate (VRR)
   G-SYNC Compatible monitors on supported GPUs.For more details,
   see "Configuring Multiple Display Devices on One X Screen" in
   the README.
 * Added support for the GLX_NV_multigpu_context and
   GL_NV_gpu_multicast extensions.For more details, see the
   "Configuring SLI and Multi-GPU FrameRendering" chapter of the
   README, and the extension specifications:

https://www.khronos.org/registry/OpenGL/extensions/NV/
      GLX_NV_multigpu_context.txt https://www.khronos.org/
      registry/OpenGL/extensions/NV/NV_gpu_multicast.txt

* Fixed a bug that prevented Vulkan applications running on
   systems configured for SLI. Vulkan applications can now run
   while SLI is enabled; however, they will only be able to use
   a single GPU.
 * Simplified the nvidia-sleep.sh sample script to no longer
   depend on unreliable detection of the current VT through
   X server logs.
 * Added EGL support for PRIME render offload. Please see the
   PRIME Render Offload chapter in the README for configuration
   details.
 * Fixed a regression introduced in 435.19.02 that would cause
   some applications which use the VK_KHR_DISPLAY extension to
   result in a segmentation fault.
 * Enabled HardDPMS by default. See the README entry on the
   X configuration option "HardDPMS" for more information.
 * Fixed a bug which caused corruption in the following
   DXVK titles:

Saints Row IV
    Saints Row: The Third

* Added VP9 decode support to the NVIDIA VDPAU driver. See the
   VDPAU Support appendix in the README for supported VP9 decoder
   profiles.
 * Fixed a bug that could cause heapUsage values reported by
   VK_EXT_memory_budget to not immediately update after
   vkFreeMemory was called.
 * Changed GPU clock management strategy to more quickly ramp
   down clocks after a drop in GPU utilization.
 * Added X configuration option, "SidebandSocketPath", which
   controls the directory in which the X driver will create a
   pathname UNIX domain socket used to communicate with the
   NVIDIA OpenGL, Vulkan and VDPAU driver components.
 * The X driver will now create a fallback pathname UNIX domain
   socket in the directory specified by the "SidebandSocketPath"
   option, or /var/run by default, which will be used by other
   NVIDIA driver components if they are unable to connect to the
   default abstract socket.This fixes a bug where graphics
   applications run within a network namespace (which prevents
   the use of abstract sockets) were unable to take advantage of
   some driver features, such as G-Sync.
 * Fall back to system memory when video memory is full for some
   driver-internal allocations. This can help fix Xid 13 and
   Xid 31 cases in Vulkan applications when video memory is full.
 * Fixed a bug that could cause a blank screen on some DisplayPort
   monitors when logging in to GNOME, if the nvidia-drm kernel
   module parameter modeset=1 is specified.
 * Fixed a bug that prevented NVIDIA GPUs from entering the
   low-power D3 state when entering suspend-to-idle (s2idle).
   Note that on some systems this may expose an existing timing
   issue in the Linux kernel; see the "Known Issues and
   Workarounds" section of the "Configuring Power Management
   Support" chapter of the README for more details.

------------------------------------------------------------------
Sat  5 Oct 00:23:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 435.21

* Fixed a bug that caused the X server to crash when using
   HardDPMS with an NVIDIA-driven GPU Screen.
 * Fixed a bug which caused the kernel to panic when exiting
   a single X server when multiple X servers were active and in
   an SLI configuration.
 * Fixed a regression introduced in the 430.* series of releases
   that caused a segmentation fault in libnvcuvid.so while using
   Video Codec SDK APIs on certain graphics boards.
 * Added initial experimental support for runtime D3 (RTD3) power
   management on Turing notebook GPUs.
 * Improved nvidia-bug-report.sh to collect runtime D3 (RTD3) power
   management information.
 * Improved nvidia-bug-report.sh to collect ACPI tables when the
   acpidump tool is available.
 * Added Vulkan and OpenGL+GLX support for PRIME render offload.
   Please see the PRIME Render Offload chapter in the README for
   system requirements and configuration details.
 * Added support for changing Digital Vibrance in the display
   controls section of nvidia-settings on Turing hardware.
 * Fixed the cuvidParseVideoData API in the NVCUVID driver to
   correctly propagate errors returned by the PFNVIDSEQUENCECALLBACK
   callback function to the application.
 * Fixed a bug that caused the NVIDIA X driver to behave incorrectly
   or crash when a client queried Xinerama information on X servers
   with a non-NVIDIA X screen as screen 0.
 * Fixed the "Image Settings" options in the "OpenGL Settings" page
   of nvidia-settings for Quadro GPUs.  Previously, OpenGL rendering
   on Quadro would behave as if the "High Quality" option were
   selected regardless of the selection.  Now, the setting will
   default to "High Quality" for Quadro but selecting a lower option
   will affect rendering accordingly. (Other GPUs are unchanged: the
   default remains "Quality", but other options can be selected if
   desired.)
 * Fixed a bug that could cause Vulkan applications to generate
   spurious warning messages about a missing NV-GLX extension.
 * Removed the non-GLVND OpenGL libraries from the NVIDIA Linux
   driver installation package. The GLVND OpenGL libraries were
   introduced in release 361.16, and have been installed by default
   since release 364.12, with the non-GLVND versions available as
   an alternative via the "--no-glvnd-glx-client" and
   "--no-glvnd-egl-client" installer options. As the non-GLVND
   libraries are no longer included in the installation package,
   these options will no longer have any effect.
 * Fixed a bug that prevented nvidia-drm from marking preferred
   modes properly when reporting display information via the
   DRM-KMS API.
 * Updated nvidia-installer to make compiler mismatches non-fatal
   when adding precompiled kernel interfaces to an installer
   package using the "--add-this-kernel" option, to be more
   consistent with the behavior when installing without
   precompiled interfaces.
 * Fixed the NvEncodeAPI driver to correctly reject the encoding
   of sequences with resolutions smaller than what the NVENC
   supports.
 * Fixed display color range handling on pre-Turing GPUs, such
   that when limited color range is selected through the display
   controls page in nvidia-settings, output pixel values will be
   correctly clamped to Consumer Technology Association (CTA)
   range.

------------------------------------------------------------------
Fri  4 Oct 23:37:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 435.17

* Fixed a bug which caused the kernel to panic when exiting a
   single X server when multiple X servers were active and in an
   SLI configuration.
 * Fixed a regression introduced in the 430.* series of releases
   that caused a segmentation fault in libnvcuvid.so while using
   Video Codec SDK APIs on certain graphics boards.
 * Added initial experimental support for runtime D3 (RTD3) power
   management on Turing notebook GPUs.
 * Improved nvidia-bug-report.sh to collect runtime D3 (RTD3)
   power management information.
 * Improved nvidia-bug-report.sh to collect ACPI tables when the
   acpidump tool is available.
 * Added Vulkan and OpenGL+GLX support for PRIME render offload.
   Please see the PRIME Render Offload chapter in the README for
   system requirements and configuration details.
 * Added support for changing Digital Vibrance in the display
   controls section of nvidia-settings on Turing hardware.
 * Fixed the cuvidParseVideoData API in the NVCUVID driver to
   correctly propagate errors returned by the
   PFNVIDSEQUENCECALLBACK callback function to the application.
 * Fixed a bug that caused the NVIDIA X driver to behave
   incorrectly or crash when a client queried Xinerama
   information on X servers with a non-NVIDIA X screen as
   screen 0.
 * Fixed the "Image Settings" options in the "OpenGL Settings"
   page of nvidia-settings for Quadro GPUs.  Previously, OpenGL
   rendering on Quadro would behave as if the "High Quality"
   option were selected regardless of the selection.  Now, the
   setting will default to "High Quality" for Quadro but
   selecting a lower option will affect rendering accordingly.
   (Other GPUs are unchanged: the default remains "Quality", but
   other options can be selected if desired.)
 * Fixed a bug that could cause Vulkan applications to generate
   spurious warning messages about a missing NV-GLX extension.
 * Removed the non-GLVND OpenGL libraries from the NVIDIA Linux
   driver installation package. The GLVND OpenGL libraries were
   introduced in release 361.16, and have been installed by default
   since release 364.12, with the non-GLVND versions available as
   an alternative via the "--no-glvnd-glx-client" and
   "--no-glvnd-egl-client" installer options. As the non-GLVND
   libraries are no longer included in the installation package,
   these options will no longer have any effect.
 * Fixed a bug that prevented nvidia-drm from marking preferred
   modes properly when reporting display information via the
   DRM-KMS API.
 * Updated nvidia-installer to make compiler mismatches
   non-fatal when adding precompiled kernel interfaces to an
   installer package using the "--add-this-kernel" option, to be
   more consistent with the behavior when installing without
   precompiled interfaces.
 * Fixed the NvEncodeAPI driver to correctly reject the encoding
   of sequences with resolutions smaller than what the NVENC
   supports.

------------------------------------------------------------------
Fri  4 Oct 22:57:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 430.50

* Fixed display color range handling on pre-Turing GPUs,
   such that when limited color range is selected through the
   display controls page in nvidia-settings, output pixel values
   will be correctly clamped to Consumer Technology Association
   (CTA) range.

------------------------------------------------------------------
Fri  4 Oct 22:44:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 430.40

* Added support for the following GPUs:
        GeForce RTX 2080 SUPER
        Quadro RTX 3000 with Max-Q Design
 * Fixed a driver installation failure in Linux kernel
   configurations with CONFIG_HOTPLUG_CPU.
 * Updated nvidia-bug-report.sh to search the systemd journal
   for gdm-x-session logs.
 * Added support to nvidia-installer for systems which provide
   ncurses libraries supporting the ncurses widechar ABI only.

------------------------------------------------------------------
Fri  4 Oct 22:36:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 430.34

* Added support for the following GPUs:

GeForce RTX 2060 SUPER
    GeForce RTX 2070 SUPER
    GeForce RTX 2080 SUPER
    Quadro RTX 4000 with Max-Q Design
    Quadro RTX 5000 with Max-Q Design

------------------------------------------------------------------
Sun 23 Jun 22:44:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 430.26

* Added support for the following GPUs:

Quadro P520
        Quadro RTX 3000
        Quadro T1000
        Quadro T2000

* Fixed a bug, introduced in 415.13, that caused audio over
   DisplayPort to not work in some configurations.

------------------------------------------------------------------
Sun 23 Jun 22:18:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 430.14

* Improved performance of the Vulkan title, DiRT4.
 * Added support for presentation from queue families which only
   expose VK_QUEUE_COMPUTE_BIT. This improves performance of
   Steam Play title, Wolfenstein II: The New Colossus.
 * Fixed a bug that could cause the display to be driven at a low
   resolution when configuring PRIME display offloading with
   `nvidia-xconfig --prime`.
 * Added HEVC YUV 4:4:4 decode support to the NVIDIA VDPAU driver.
 * Added the new per-decoder profile capability bit
   VDP_DECODER_PROFILE_SUPPORTED_CHROMA_TYPES to the NVIDIA VDPAU
   driver.
 * Added new VdpYCbCrFormats VDP_YCBCR_FORMAT_Y_UV_444 and
   VDP_YCBCR_FORMAT_Y_U_V_444 for accessing YUV 4:4:4 surfaces via
   VdpVideoSurfaceGetBitsYCbCr() and VdpVideoSurfacePutBitsYCbCr()
   in the NVIDIA VDPAU driver.
 * Added support for creation of YUV 4:4:4 video surfaces in the
   NVIDIA VDPAU driver.
 * Raised the minimum supported X.Org xserver version to 1.7
   (video driver ABI version 6).
 * Updated the NVIDIA VDPAU driver to support allocating VDPAU
   video surfaces with explicit field or frame picture structure.
 * Added support for the GL_NV_vdpau_interop2 OpenGL extension,
   which allows VDPAU/OpenGL surface sharing with explicit field
   or frame picture structure. Picture structure selection by
   applications can avoid the need for implicit surface structure
   conversion by the OpenGL implementation.
 * Updated nvidia-installer to avoid problems with commands whose
   proper functionality may be dependent on system localization
   (e.g. via the LANG environment variable.) For example, some
   kernel configurations may produce unusable kernel modules if
   LANG is set to a language other than English.

------------------------------------------------------------------
Sun 23 Jun 20:02:00 CET 2019 - bumblebee.obs@gmail.com

- Update to 430.09

* Added support for the following GPU:
        GeForce GTX 1650
        GeForce GTX 1650 with Max-Q Design
        GeForce GTX 1660 Ti with Max-Q Design 
 * Fixed a bug that could cause the display to be driven at a low
    resolution when configuring PRIME display offloading with
    nvidia-xconfig --prime`.
 * Added HEVC YUV 4:4:4 decode support to the NVIDIA VDPAU driver.
 * Added the new per-decoder profile capability bit
    VDP_DECODER_PROFILE_SUPPORTED_CHROMA_TYPES to the NVIDIA
    VDPAU driver.
 * Added new VdpYCbCrFormats VDP_YCBCR_FORMAT_Y_UV_444 and
    VDP_YCBCR_FORMAT_Y_U_V_444 for accessing YUV 4:4:4 surfaces via
    VdpVideoSurfaceGetBitsYCbCr() and VdpVideoSurfacePutBitsYCbCr()
    in the NVIDIA VDPAU driver.
 * Added support for creation of YUV 4:4:4 video surfaces in the
   NVIDIA VDPAU driver.
 * Raised the minimum supported X.Org xserver version to 1.7
   (video driver ABI version 6).
 * Updated the NVIDIA VDPAU driver to support allocating VDPAU
   video surfaces with explicit field or frame picture structure.
 * Added support for the GL_NV_vdpau_interop2 OpenGL extension,
   which allows VDPAU/OpenGL surface sharing with explicit field
   or frame picture structure. Picture structure selection by
   applications can avoid the need for implicit surface structure
   conversion by the OpenGL implementation.
 * Updated nvidia-installer for better compatibility with ncurses
   when libncurses.so.6 exposes the ncurses reentrant ABI, such
   as on openSUSE Leap 15 and SUSE Linux Enterprise 15.

------------------------------------------------------------------
Sun 23 Jun 19:53:00 CET 2019 - bumblebee.obs@gmail.com

- Switch to glvnd

------------------------------------------------------------------
Sat 13 Apr 18:07:00 CET 2019 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 418.56

* Added support for the following GPU:
        GeForce MX230
        GeForce MX250 
 * Updated nvidia-settings to disable line wrapping when
   outputting to a non-terminal in command-line mode.
   From GitHub pull request:
    https://github.com/NVIDIA/nvidia-settings/pull/37
 * Updated the nvidia-settings control panel to more accurately
   reflect the current availability of G-SYNC or G-SYNC
   compatible display settings.
 * Fixed a bug which could sometimes cause Vulkan applications
   to lock up the GPU when freeing large chunks of memory on
   systems with PRIME enabled.
 * Updated the driver to restrict use of the GPU performance
   counters to system administrators by default. The previous
   more permissive behavior can be restored by setting
   NVreg_RestrictProfilingToAdminUsers=0 when loading nvidia.ko.
   
------------------------------------------------------------------
Mon  4 Mar 00:14:00 CET 2019 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 418.43

* Added support for the following GPU:
        GeForce GTX 1660 Ti
        GeForce RTX 2070 with Max-Q Design
        GeForce RTX 2080 with Max-Q Design
 * Fixed a bug that would occasionally cause visual corruption
   on some Vulkan titles. This bug was particularly prevalent
   on DXVK titles.
 * Fixed a bug that caused vkCmdPushConstants to generate Xid 13
   messages when executed with VK_SHADER_STAGE_ALL on a compute
   queue.
 * Added initial support for G-SYNC Compatible monitors.See
   the README for details.
 * Added support for stereo presentation in Vulkan.
 * Fixed a bug that could cause OpenGL applications to crash
   after repeated VT-switches.
 * Fixed a bug that could sometimes prevent PRIME displays from
   being selected in the display settings page of nvidia-settings.
 * NVIDIA Video Codec SDK 9.0

A new release of the Video Codec SDK will be available
    in Q1 2019. For more information and early access sign-up,
    refer to https://developer.nvidia.com/nvidia-video-codec-sdk

The main features available in this release are listed below:
      o Support for Turing NVENC/NVDEC.
      o The NVDECODE API (also known as the NVCUVID API) has been
        updated to support YUV 4:4:4 decoding for HEVC on Turing
        GPUs.
      o NvEncodeAPI has been updated to support HEVC B-frames on
        Turing GPUs.
      o NvEncodeAPI adds the capability to output the encoded
        bitstream, and motion vectors from motion estimation-only 
        mode, to video memory. This avoids the overhead of copying
        the output from system to video memory for processing
        pipelines operating directly on video memory.
      o NvEncodeAPI now accepts CUarrays as input buffers. The
        SDK contains a sample application to demonstrate how to
        feed a Vulkan image to NVENC using the Vulkan-CUDA interop.
        
 * Added NVIDIA optical flow support.

A new library libnvidia-opticalflow.so is included in the
    driver package. The NVIDIA optical flow library can be used
    for hardware-accelerated computation of optical flow vectors and
    stereo disparity values. The API header files, sample
    applications and documentation will be available in a separate
    Optical Flow SDK package in Q1 2019.

For more information and early access sign-up,
    refer to https://developer.nvidia.com/opticalflow-sdk
 * Removed libnvidia-wfb.so from the driver package.This module 
   was only used on X servers that did not provide their own
   implementation of libwfb, and all X.Org xserver versions now
   supported by the driver do so.
 * Updated the VDPAU driver to reject decoding to YUV 4:2:2 video
   surfaces.The NVIDIA VDPAU driver always produces YUV 4:2:0
   content.Previously, the VDPAU driver implicitly converted a
   YUV 4:2:2 video surface to YUV 4:2:0 during decode.Now, the
   VDPAU driver will fail the decode request.
 * Optimized nvidia-installer to only run depmod(1) once when
   installing, rather than twice (once during the uninstall
   phase and again when installing new kernel modules).
 * Removed the NVreg_UseThreadedInterrupts kernel module
   parameter from nvidia.ko. This removes the ability to forcibly
   fall back to an older mechanism (tasklets) for running the
   bottom-half interrupt handler. Instead, threaded IRQs (the
   default since 367.44) are always used.
 * Fixed a bug where destroying a direct-to-display swapchain
   could crash Vulkan applications.
 * Fixed a bug that prevented Vulkan applications from using
   the VK_EXT_display_control extension on a display that is
   driven by X.
 * Improved nvidia-bug-report.sh to grab the output of the
   `vulkaninfo` command when it is available.
 * Fixed build failures which resulted in errors like "implicit
   declaration of function drm_...", when building the NVIDIA DRM
   kernel module for Linux kernel 5.0 release candidates.
 * Fixed a bug that could prevent nvidia-xconfig from disabling
   the X Composite extension on version 1.20 of the X.org X server.
 * Fixed a build failure, "too many arguments to function
   'get_user_pages'", when building the NVIDIA kernel module for
   Linux kernel v4.4.168.
 * Fixed a build failure, "implicit declaration of function
   do_gettimeofday", when building the NVIDIA kernel module for
   Linux kernel 5.0 release candidates.

------------------------------------------------------------------
Mon  4 Mar 00:05:00 CET 2019 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 418.30

* Added initial support for G-SYNC Compatible monitors. See
   the README for details.
 * Added support for stereo presentation in Vulkan.
 * Fixed a bug that could cause OpenGL applications to crash
   after repeated VT-switches.
 * Fixed a bug that could sometimes prevent PRIME displays from
   being selected in the display settings page of nvidia-settings.

* NVIDIA Video Codec SDK 9.0

A new release of the Video Codec SDK will be available
    in Q1 2019.
    For more information and early access sign-up,
    refer to https://developer.nvidia.com/nvidia-video-codec-sdk

The main features available in this release are listed below:
     * Support for Turing NVENC/NVDEC.
     * The NVDECODE API (also known as the NVCUVID API) has
        been updated to support YUV 4:4:4 decoding for HEVC on
        Turing GPUs.
     * NvEncodeAPI has been updated to support HEVC B-frames on
        Turing GPUs. NvEncodeAPI adds the capability to output
        the encoded bitstream, and motion vectors from motion
        estimation-only mode, to video memory. This avoids the
        overhead of copying the output from system to video memory
        for processing pipelines operating directly on video memory.
     * NvEncodeAPI now accepts CUarrays as input buffers. The
        SDK contains a sample application to demonstrate how to
        feed a Vulkan image to NVENC using the Vulkan-CUDA interop.

* Added NVIDIA optical flow support.

A new library libnvidia-opticalflow.so is included in the
    driver package. The NVIDIA optical flow library can be used
    for hardware-accelerated computation of optical flow vectors
    and stereo disparity values. The API header files, sample
    applications and documentation will be available in a separate
    Optical Flow SDK package in Q1 2019.

For more information and early access sign-up,
    refer to https://developer.nvidia.com/opticalflow-sdk

* Removed libnvidia-wfb.so from the driver package. This module
   was only used on X servers that did not provide their own
   implementation of libwfb, and all X.Org xserver versions now
   supported by the driver do so.
 * Updated the VDPAU driver to reject decoding to YUV 4:2:2 video
   surfaces. The NVIDIA VDPAU driver always produces YUV 4:2:0
   content. Previously, the VDPAU driver implicitly converted a
   YUV 4:2:2 video surface to YUV 4:2:0 during decode. Now, the
   VDPAU driver will fail the decode request.
 * Optimized nvidia-installer to only run depmod(1) once when
   installing, rather than twice (once during the uninstall phase
   and again when installing new kernel modules).
 * Removed the NVreg_UseThreadedInterrupts kernel module parameter
   from nvidia.ko. This removes the ability to forcibly fall back
   to an older mechanism (tasklets) for running the bottom-half
   interrupt handler. Instead, threaded IRQs (the default since
   367.44) are always used.

------------------------------------------------------------------
Sun  6 Jan 17:00:00 CET 2019 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 415.25

* Added support for the following GPU:       
        TITAN RTX
 * Fixed a bug that could prevent display detection from working
   on displays connected to some notebook docking stations.
 * Fixed a bug which could cause VK_KHR_external_semaphore_fd
   operations to fail.

------------------------------------------------------------------
Sun  6 Jan 16:17:00 CET 2019 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 415.23

* Fixed a build failure, "implicit declaration of function
   'vm_insert_pfn'", when building the NVIDIA DRM kernel module
   for Linux kernel 4.20 release candidates.

------------------------------------------------------------------
Sun  6 Jan 16:04:00 CET 2019 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 415.22

* Fixed a regression that prevented applications based on the
   Unity engine from starting.
 * Added support for VK_EXT_transform_feedback.
 * Fixed a build failure, "unknown type name 'ipmi_user_t'",
   when building the NVIDIA kernel module for Linux kernel 4.20
   release candidates.

------------------------------------------------------------------
Sun  6 Jan 15:52:00 CET 2019 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 415.18

* Fixed a bug that caused corruption on vkCmdCopyImage calls for
   non-2D texture targets.
 * Fixed a bug that caused mode switches to fail when an SDI output
   board was connected.
 * Fixed a bug that could cause rendering corruption in Vulkan
   programs.
 * Added a new hook script, "pre-unload", to the nvidia-installer
   hook script system. This script, if present, will be executed
   before nvidia-installer attempts to unload existing NVIDIA
   kernel modules.
 * Fixed a bug that caused vkGetPhysicalDeviceDisplayPropertiesKHR()
   to occasionally return incorrect values for physicalResolution.
 * Added the synchronization state for PRIME Displays to
   nvidia-settings.
 * Improved error reporting in eglSwapBuffers() by generating
   codes for some missing error types, and adding additional
   detail to the already existing ones.
 * Improved the appearance and functionality of the nvidia-settings
   control panel when it is resized to small sizes.
 * Updated the nvidia-settings control panel to prevent some icons
   from being displayed incorrectly while using some GTK+ themes.
 * Fixed a bug that could cause WINE to crash on recent OS releases.
 * Fixed a bug that could cause an X server crash when exiting
   Vulkan applications running on X servers with UBB enabled.
 * Fixed an X driver bug that caused the "NoEdidModes" token of
   the "ModeValidation" X configuration option to reject non-EDID
   modes whose timings matched EDID modes.
 * Changed the NvEncCreateBitstreamBuffer API call in the
   NvEncodeAPI library to return NV_ENC_ERR_UNIMPLEMENTED instead
   of NV_ENC_SUCCESS when the encoder instance is configured to
   run in motion estimation-only mode. As an indirect consequence
   of this change, users running the AppEncME sample application
   from the Video Codec SDK prior to SDK version 8.2.16 will observe
   a segmentation fault due to bugs in the NvEncoder class. It is
   recommended that users download the latest version of the SDK,
   where these bugs have been fixed, from
   https://developer.nvidia.com/nvidia-video-codec-sdk.
 * Fixed an OpenGL driver bug that caused the upper bounds of
   floating-point viewports, specified through the ARB_viewport_array
   extension, to be clipped incorrectly.
 * Added a new X configuration option "HardDPMS" which is disabled
   by default, but can be enabled to put displays to sleep with
   modesets rather than VESA DPMS. This may fix some displays that
   fail to sleep when DPMS becomes active. "HardDPMS" will be
   enabled by default in a future release.
 * Raised the minimum supported X.Org xserver version to 1.5
   (video driver ABI version 4).
 * Enabled the NVreg_EnableBacklightHandler kernel module option
   by default.
 * Removed the LinuxThreads version of the /usr/lib/libnvidia-tls.so
   library and replaced it with the NPTL one that was previously
   installed in /usr/lib/tls/. This fixes crashes on Debian systems
   when the /etc/ld.so.nohwcap file is present.
 * Updated nvidia-installer to allow the --no-cc-version-check
   option to disable the compiler version check when installing
   with DKMS.
 * Changed the minimum required Linux kernel version from 2.6.9
   to 2.6.32.
 * Fixed an OpenGL bug where conditional rendering
   (NV_conditional_render) was incorrectly affecting mipmap
   generation.
 * Fixed a bug that could cause the X server to hang on systems
   booted in legacy VGA mode when using a DisplayPort
   Multi-Stream link.

------------------------------------------------------------------
Thu  8 Nov 15:19:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 415.13

* Added a new hook script, "pre-unload", to the nvidia-installer
   hook script system. This script, if present, will be executed
   before nvidia-installer attempts to unload existing NVIDIA
   kernel modules.
 * Fixed a bug that caused vkGetPhysicalDeviceDisplayPropertiesKHR()
   to occasionally return incorrect values for physicalResolution.
 * Added the synchronization state for PRIME Displays to
   nvidia-settings.
 * Improved error reporting in eglSwapBuffers() by generating codes
   for some missing error types, and adding additional detail to the
   already existing ones.
 * Improved the appearance and functionality of the nvidia-settings
   control panel when it is resized to small sizes.
 * Updated the nvidia-settings control panel to prevent some icons
   from being displayed incorrectly while using some GTK+ themes.
 * Fixed a bug that could cause WINE to crash on recent OS releases.
 * Fixed a bug that could cause an X server crash when exiting
   Vulkan applications running on X servers with UBB enabled.
 * Fixed an X driver bug that caused the "NoEdidModes" token of the
   "ModeValidation" X configuration option to reject non-EDID modes
   whose timings matched EDID modes.
 * Changed the NvEncCreateBitstreamBuffer API call in the NvEncodeAPI
   library to return NV_ENC_ERR_UNIMPLEMENTED instead of
   NV_ENC_SUCCESS when the encoder instance is configured to run in
   motion estimation-only mode. As an indirect consequence of this
   change, users running the AppEncME sample application from the
   Video Codec SDK prior to SDK version 8.2.16 will observe a
   segmentation fault due to bugs in the NvEncoder class. It is
   recommended that users download the latest version of the SDK,
   where these bugs have been fixed, from
   https://developer.nvidia.com/nvidia-video-codec-sdk.
 * Fixed an OpenGL driver bug that caused the upper bounds of
   floating-point viewports, specified through the
   ARB_viewport_array extension, to be clipped incorrectly.
 * Added a new X configuration option "HardDPMS" which is disabled
   by default, but can be enabled to put displays to sleep with
   modesets rather than VESA DPMS. This may fix some displays that
   fail to sleep when DPMS becomes active. "HardDPMS" will be
   enabled by default in a future release.
 * Raised the minimum supported X.Org xserver version to 1.5
   (video driver ABI version 4).
 * Enabled the NVreg_EnableBacklightHandler kernel module
   option by default.
 * Removed the LinuxThreads version of the
   /usr/lib/libnvidia-tls.so library and replaced it with the
   NPTL one that was previously installed in /usr/lib/tls/. This
   fixes crashes on Debian systems when the /etc/ld.so.nohwcap
   file is present.
 * Updated nvidia-installer to allow the --no-cc-version-check
   option to disable the compiler version check when installing
   with DKMS.
 * Changed the minimum required Linux kernel version from 2.6.9 to
   2.6.32.
 * Fixed an OpenGL bug where conditional rendering
   (NV_conditional_render) was incorrectly affecting mipmap
   generation.
 * Fixed a bug that could cause the X server to hang on systems
   booted in legacy VGA mode when using a DisplayPort Multi-Stream
   link.

------------------------------------------------------------------
Fri  2 Nov 22:54:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 410.73

* Added support for the following GPUs:
        Quadro RTX 6000
        Quadro RTX 5000
 * Added a USB-C display connector type identifier, such that
   a display connected using Turing's USB-C connector will be named,
   e.g., "USB-C-0" rather than "DP-5". Scripts and configuration
   files that use the DP identifier for this connector will be affected.
 * Fixed a bug that caused vkGetPhysicalDeviceDisplayPropertiesKHR()
   to occasionally return incorrect values for physicalResolution.
 * Added the synchronization state for PRIME Displays to
   nvidia-settings.

------------------------------------------------------------------
Fri  2 Nov 21:52:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 410.66

* Added support for the following GPUs:

Quadro RTX 6000
    Quadro RTX 5000
    GeForce RTX 2070
    GeForce RTX 2080 Ti
    GeForce RTX 2080
    Quadro P5200 with Max-Q Design
    Quadro P4200 with Max-Q Design
    Quadro P2000 with Max-Q Design

* Added a graphics API visual indicator.  It can be toggled through
   nvidia-settings' "OpenGL Settings" panel, the
   __GL_SHOW_GRAPHICS_OSD environment variable, or the
   GLShowGraphicsOSD application profile.
   See the README for more information.
 * Added support for X11 RandR transformations on outputs where
   the NVIDIA X driver is used as a synchronized RandR 1.4 output
   source (i.e., "PRIME Sync").
 * Fixed a bug that caused OpenGL corruption on outputs where
   the NVIDIA X driver was used as an RandR 1.4 output source
   (i.e., "PRIME"), and the output sink required a software cursor.
 * Fixed an X driver RandR output source (i.e., "PRIME") bug that
   could cause a duplicate cursor to appear on such outputs.
 * Exposed EGL 1.5 in the EGL version string. This does not add
   any extra functionality to the EGL driver. All EGL 1.5 features
   were already supported through EGL 1.4 plus extensions.
 * Added the OptiX ray tracing engine, libnvoptix.so.1, to the
   driver package.
   This library is loaded by the liboptix.so.* library bundled with
   applications that use the OptiX API.
 * Updated nvidia-installer to allow the --no-cc-version-check
   option to disable the compiler version check when installing
   with DKMS.
 * Added experimental support for VK_EXT_global_priority.
 * Removed support for the VK_NV_glsl_shader Vulkan extension.
   This extension was added before the Vulkan ecosystem had mature
   SPIR-V compilers and tools.  Now that the SPIR-V compilers and
   tools have advanced, Vulkan developers are encouraged to use
   SPIR-V instead of GLSL.
 * Fixed a bug that caused VDPAU-decoded H.265/HEVC content to have
   interlaced artifacts when shared with OpenGL through the
   GL_NV_vdpau_interop extension.
 * Implemented support for Vulkan real-time ray tracing extensions
   (VK_NV_raytracing). Two new libraries, libnvidia-rtcore.so and
   libnvidia-cbl.so, have been added to support the new functionality.
   These new libraries are needed by Vulkan at run-time to expose
   the new extension. If they are not found, Vulkan will continue
   to work without VK_NV_raytracing support.
 * Removed OpenGL header files from the installer package, which
   were deprecated and not installed by default since
   release 260.19.04, but could still be installed with the
   '--opengl-headers' option. If your distribution doesn't provide
   a package with headers, up-to-date headers can be found at
   these locations:
   https://www.khronos.org/registry/OpenGL/index_gl.php
   https://github.com/NVIDIA/libglvnd/tree/master/include/GL
 * Added a USB-C connector type identifier, such that a display
   connected using the USB-C connector that was previously
   reported as e.g. DP-5 will now be USB-C-0. Scripts and
   configuration files that use the DP identifier for this
   connector will be affected.

------------------------------------------------------------------
Mon 8 Oct 23:34:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 410.57

* Added support for the following GPUs:
        GeForce RTX 2080 Ti
        GeForce RTX 2080
        Quadro P5200 with Max-Q Design
        Quadro P4200 with Max-Q Design
        Quadro P2000 with Max-Q Design 
 * Added a graphics API visual indicator. It can be toggled
   through nvidia-settings' "OpenGL Settings" panel,
   the __GL_SHOW_GRAPHICS_OSD environment variable, or
   the GLShowGraphicsOSD application profile. See the README
   for more information.
 * Added support for X11 RandR transformations on outputs where
   the NVIDIA X driver is used as a synchronized RandR 1.4
   output source (i.e., "PRIME Sync").
 * Fixed a bug that caused OpenGL corruption on outputs where
   the NVIDIA X driver was used as an RandR 1.4 output source
   (i.e., "PRIME"), and the output sink required a software cursor.
 * Fixed an X driver RandR output source (i.e., "PRIME") bug that
   could cause a duplicate cursor to appear on such outputs.
 * Exposed EGL 1.5 in the EGL version string. This does not add
   any extra functionality to the EGL driver. All EGL 1.5 features
   were already supported through EGL 1.4 plus extensions.
 * Added the OptiX ray tracing engine, libnvoptix.so.1, to the
   driver package.

This library is loaded by the liboptix.so.* library bundled
    with applications that use the OptiX API.

* Updated nvidia-installer to allow the --no-cc-version-check
   option to disable the compiler version check when installing
   with DKMS.
 * Added experimental support for VK_EXT_global_priority.
 * Removed support for the VK_NV_glsl_shader Vulkan extension.
   This extension was added before the Vulkan ecosystem had mature
   SPIR-V compilers and tools. Now that the SPIR-V compilers and
   tools have advanced, Vulkan developers are encouraged to use
   SPIR-V instead of GLSL.
 * Fixed a bug that caused VDPAU-decoded H.265/HEVC content to
   have interlaced artifacts when shared with OpenGL through the
   GL_NV_vdpau_interop extension.
 * Implemented support for Vulkan real-time ray tracing extensions
   (VK_NV_raytracing). Two new libraries, libnvidia-rtcore.so and
   libnvidia-cbl.so, have been added to support the new
   functionality. These new libraries are needed by Vulkan at
   run-time to expose the new extension. If they are not found,
   Vulkan will continue to work without VK_NV_raytracing support.
 * Removed OpenGL header files from the installer package, which
   were deprecated and not installed by default since release
   260.19.04, but could still be installed with the
   '--opengl-headers' option. If your distribution doesn't
   provide a package with headers, up-to-date headers can be
   found at these locations:
    https://www.khronos.org/registry/OpenGL/index_gl.php
    https://github.com/NVIDIA/libglvnd/tree/master/include/GL

------------------------------------------------------------------
Wed 21 Aug 16:11:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 396.54

* Fixed a resource leak introduced in the 390 series of drivers
   that could lead to reduced performance after starting and
   stopping several OpenGL and/or Vulkan applications.

------------------------------------------------------------------
Wed 21 Aug 16:01:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 396.51

* Added support for the following GPU:
        Quadro P3200 with Max-Q Design
 * Added a new command line option,
   --override-file-type-destination, to nvidia-installer.
   This option can be used to override the destination of
   installed files by file type at installation time.
 * Added support for VK_EXT_vertex_attribute_divisor.

------------------------------------------------------------------
Wed 21 Aug 15:11:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 396.45

* Improved recovery of Vulkan direct-to-display applications
   after an application hang or crash.
 * Fixed a bug that could cause multi-threaded EGL applications
   to Crash when exiting.
 * Improved compatibility with recent Linux kernels.
 * Fixed an intermittent hang of Vulkan applications running
   fullscreen when flipping is allowed.
 * Removed informational messages that were printed by
   nvidiamodeset.ko whenever a GPU device was allocated or freed.
 * Fixed a bug that could cause kernel panics when using Quadro
   SDI Capture hardware.
 * Fixed a bug that caused kwin OpenGL compositing to crash when
   launching certain OpenGL applications.
 * Fixed an intermittent crash when launching Vulkan applications.
 * Fixed an intermittent crash when launching applications through
   Wine.
 * Fixed a bug that caused the driver, in some low bandwidth
   DisplayPort configurations, to not implicitly enable display
   dithering. This resulted in visible banding.
 * Fixed intermittent hangs of fullscreen Vulkan applications when
   focused away (e.g., by using the alt-tab key combination) on
   non-composited desktops.
 * Increased the version numbers of the GLVND libGL, libGLESv1_CM,
   libGLESv2, and libEGL libraries, to prevent concurrently installed
   non-GLVND libraries from taking precedence in the dynamic linker
   cache.
 * Updated the OpenGL driver to allow the use of integer format
   (SINT/UINT) color attachments with depth attachments in Frame Buffer Objects.

------------------------------------------------------------------
Sun  6 May 14:12:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 396.24

* Added support for the following GPUs:  
        GeForce GTX 1050 with Max-Q Design
        Quadro P3200
        Quadro P4200
 * Fixed a regression that caused the current MetaMode's
   ViewPortIn and ViewPortOut settings to be preserved across
   RandR modesets. The driver now clears ViewPortIn and
   ViewPortOut when the mode is set through RandR, restoring
   the behavior that existed prior to the regression.
 * Improved error reporting in the Vulkan driver if
   libnvidia-glvkspirv.so, the new Vulkan SPIR-V compiler added
   in 396.24, cannot be found at run time.
 * Fixed performance regressions and corruption issues in the
   new Vulkan SPIR-V compiler.
 * Added support for 32-bit PCI domains throughout the NVIDIA
   driver stack. This support is required for running Linux VMs
   with recent versions of the pci_hyperv driver on top of Hyper-V.
 * Updated the SLI Mosaic configuration page in nvidia-settings
   to make more layout configurations available, including
   configurations that do not utilize all of the available displays.
 * Added reporting of EGL information to nvidia-settings.
 * Added support for a new Vulkan SPIR-V compiler which reduces
   shader compilation time and shader system memory consumption.

A new environment variable can be used to enable (1) (default)
    or disable (0) the new compiler if errors in existing
    applications are found:

__GL_NextGenCompiler=<int>

The following application profile setting with the same
    definition is also available:

{ "pattern" : [], "profile" : [ "NextGenCompiler", <int> ] }

The old compiler is deprecated and will be removed in a
    future release.
 * Updated nvidia-installer to recognize partial libglvnd
   installations which are missing only optional libraries. This
   allows the installer to continue installation by default when
   libglvnd is installed without libOpenGL.so, as is frequently the
   case with distribution-provided libglvnd installations.
 * Improved performance of the following Vulkan APIs:
        vkAllocateMemory()
        vkBindBufferMemory()
        vkBindImageMemory()
 * Fixed a bug that caused the NV_CTRL_STEREO_SWAP_MODE setting
   for quad-buffered stereo visuals to not be preserved across
   modesets or VT switches.
 * Added a new global X configuration option "AllowExternalGpus",
   which defaults to disabled, but can be enabled to allow eGPUs and
   other surprise-removable GPUs to be configured with X screens.
 * Added support for X.Org xserver ABI 24 (xorg-server 1.20).
 * Improved nvidia-bug-report.sh to check for kern.log which is the
   default kernel log-file location for many Debian-based Linux
   distributions.
 * Fixed a bug which could cause X servers that export a Video
   Driver ABI earlier than 0.8 to crash when running X11
   applications which call XRenderAddTraps().

------------------------------------------------------------------
Sun  6 May 13:40:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 396.18

* Added support for the following GPUs:
        Quadro GV100
        Quadro P3200
        Quadro P4200 
 * Updated the SLI Mosaic configuration page in nvidia-settings
   to make more layout configurations available, including
   configurations that do not utilize all of the available displays.
 * Added reporting of EGL information to nvidia-settings.
 * Added support for a new Vulkan SPIR-V compiler which reduces
   shader compilation time and shader system memory consumption.
 * A new environment variable can be used to enable (1) (default)
   or disable (0) the new compiler if errors in existing
   applications are found:

__GL_NextGenCompiler=

The following application profile setting with the same
    definition is also available:

{ "pattern" : [], "profile" : [ "NextGenCompiler", ] }

The old compiler is deprecated and will be removed in a
    future release.

* Updated nvidia-installer to recognize partial libglvnd
   installations which are missing only optional libraries. This
   allows the installer to continue installation by default when
   libglvnd is installed without libOpenGL.so, as is frequently the
   case with distribution-provided libglvnd installations.
 * Improved performance of the following Vulkan APIs:
        *vkAllocateMemory() 
        *vkBindBufferMemory() 
        *vkBindImageMemory() 
 * Fixed a bug that caused the NV_CTRL_STEREO_SWAP_MODE setting
   for quad-buffered stereo visuals to not be preserved across
   modesets or VT switches.
 * Added a new global X configuration option "AllowExternalGpus",
   which defaults to disabled, but can be enabled to allow eGPUs
   and other surprise-removable GPUs to be configured with X screens.

------------------------------------------------------------------
Wed  4 Apr 15:52:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 390.48

* Added support for the following GPUs:
        Quadro GV100
 * Updated the driver to prevent G-SYNC from being enabled when
   a Quadro Sync board is installed. G-SYNC and Quadro Sync were
   always mutually incompatible features, and this change makes it
   easier to use G-SYNC capable monitors on Quadro Sync configurations,
   as it is now no longer necessary to manually disable G-SYNC.
 * Further improved the fix for occasional flicker when using the
   X driver's composition pipeline.  This was mostly fixed in 390.42,
   but now the fix should be more complete.
 * Improved compatibility with recent Linux kernels.
 * Fixed a string concatenation bug that caused libGL to accidentally
   try to create the directory "$HOME.nv" rather than "$HOME/.nv" in
   some cases where /tmp isn't accessible.
 * Increased the version numbers of the GLVND libGL, libGLESv1_CM,
   libGLESv2, and libEGL libraries, to prevent concurrently installed
   non-GLVND libraries from taking precedence in the dynamic
   linker cache.
 * Fixed a bug which could cause X servers that export
   a Video Driver ABI earlier than 0.8 to crash when running X11
   applications which call XRenderAddTraps().

------------------------------------------------------------------
Wed  4 Apr 15:39:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 390.42

* Added support for the following GPUs:
        Quadro GV100
 * Fixed a regression, introduced in 390.12, that caused occasional
   flicker when using the X driver's composition pipeline, for
   example when using screen transformations like rotation, or the
   "ForceCompositionPipeline" or
   "ForceFullCompositionPipeline" options."

------------------------------------------------------------------
Mon 12 Feb 13:09:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 390.25

* Added support for the following GPUs:
        GeForce GTX 1060 5GB
        Quadro P620
 * Fixed a regression introduced in 390.12 that prevented displays
   from working normally when running multiple X screens with
   emulated overlays.
 * Fixed a regression introduced in 390.12 that caused occasional
   hangs and hard lockup messages in the system log when screen
   transformations are in use.
 * Added new application profile settings, "EGLVisibleDGPUDevices"
   and "EGLVisibleTegraDevices", to control which discrete and
   Tegra GPU devices, respectively, may be enumerated by EGL.
   See the "Application Profiles" appendix of the driver README
   for more details.
 * Corrected the SONAME of the copy of the libnvidia-egl-wayland
   library included in the .run installer package to
   libnvidia-egl-wayland.so.1. The SONAME had previously been
   versioned incorrectly with the full version number of the
   library.
 * Updated nvidia.ko to veto the ACPI_VIDEO_NOTIFY_PROBE event
   on kernels that allow the handler for this event to be
   overridden, to improve interaction between the NVIDIA driver
   and acpi_video on display hotplug events.
 * Updated the SLI Mosaic layout page in the nvidia-settings
   control panel to support topologies with up to 32 displays.
 * Fixed a bug that prevented Xinerama Info from being handled
   properly in SLI or Base Mosaic layouts with more than
   24 displays.
 * Updated the X driver's composition pipeline (used for
   rotation, warp and blend, transformation matrices, etc) to
   also support stereo.
 * Added an OpenGL stereo preview feature to the screen page in
   nvidia-settings.
 * Fixed a bug where GetTexSubImage() would read incorrect data
   into a pixel buffer object when supplied with a target of
   GL_TEXTURE_1D_ARRAY and a non-zero yoffset value.
 * Added support for generic active stereo with in-band
   DisplayPort signaling. The X configuration option
   "InbandStereoSignaling" is deprecated in favor of this stereo
   mode. See "Appendix B. X Config Options" in the README for
   more information.
 * Modified the driver to avoid restoring framebuffer console
   modes on virtual reality head-mounted displays.
 * Fixed a bug which could cause X servers that export a Video
   Driver ABI earlier than 0.8 to crash when running X11
   applications which call XRenderAddTraps().

------------------------------------------------------------------
Fri  5 Jan 22:43:00 CET 2018 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 390.12

* Added support for the following GPUs:
        TITAN Xp COLLECTORS EDITION
        GeForce GTX 1070 Ti
 * Added new application profile settings, "EGLVisibleDGPUDevices"
   and "EGLVisibleTegraDevices", to control which discrete and
   Tegra GPU devices, respectively, may be enumerated by EGL. See
   the "Application Profiles" appendix of the driver README for
   more details.
 * Corrected the SONAME of the copy of the libnvidia-egl-wayland
   library included in the .run installer package to
   libnvidia-egl-wayland.so.1. The SONAME had previously been
   versioned incorrectly with the full version number of the library.
 * Updated nvidia.ko to veto the ACPI_VIDEO_NOTIFY_PROBE event on
   kernels that allow the handler for this event to be overridden,
   to improve interaction between the NVIDIA driver and acpi_video
   on display hotplug events.
 * Updated the SLI Mosaic layout page in the nvidia-settings control
   panel to support topologies with up to 32 displays.
 * Fixed a bug that prevented Xinerama Info from being handled
   properly in SLI or Base Mosaic layouts with more than 24 displays.
 * Updated the X driver's composition pipeline (used for rotation,
   warp and blend, transformation matrices, etc) to also support
   stereo.
 * Added an OpenGL stereo preview feature to the screen page in
   nvidia-settings.
 * Fixed a bug where GetTexSubImage() would read incorrect data
   into a pixel buffer object when supplied with a target of
   GL_TEXTURE_1D_ARRAY and a non-zero yoffset value.
 * Added support for generic active stereo with in-band
   DisplayPort signaling. The X configuration option
   "InbandStereoSignaling" is deprecated in favor of this
   stereo mode. See "Appendix B. X Config Options" in the README
   for more information.
 * Modified the driver to avoid restoring framebuffer console
   modes on virtual reality head-mounted displays.
 * Fixed a bug that could cause a system crash when using the new
   NVreg_EnableBacklightHandler kernel module parameter on GPUs
   with no displays connected.

------------------------------------------------------------------
Fri  8 Dec 10:50:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 387.34

* Added support for the following GPU:
        TITAN V 
 * Fixed a bug that caused Vulkan X11 swapchains to fail on
   GPUs without a display engine, such as some Tesla-branded
   graphics cards and some Optimus laptops.
 * Fixed a bug that caused fullscreen Vulkan applications to
   hang on some Kepler GPUs, such as the GeForce GTX 680.
 * Fixed a bug where the G-SYNC indicator was reporting "normal"
   instead of "G-SYNC" on Vulkan applications when G-SYNC was
   enabled.

------------------------------------------------------------------
Fri  8 Dec 10:41:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 384.98

* Fixed a bug that could cause some eDP G-SYNC displays to
   flicker at low refresh rates.
 * Fixed a bug that could cause OpenGL applications to crash
   after a prolonged DPMS sleep state on a monitor driven with
   PRIME Sync.
 * Fixed a bug that artificially limited the maximum pixel
   clock to 300 MHz when using certain more capable DisplayPort
   to HDMI adapters.
 * Fixed a bug that prevented the NVIDIA kernel modules from
   building for non-SMP Linux kernels.
 * Updated the output of `nvidia-smi nvlink --status` to include
   reporting NVLink speed.
 * Fixed a bug that caused incorrect PCI topology reporting in
   nvidia-smi on Intel Skylake systems.

------------------------------------------------------------------
Tue 10 Sep 14:57:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 384.90

* Added support for the following GPU:
        Quadro P5200
 * Fixed a regression that caused display flickering at lower
   PowerMizer performance levels on some GPUs.
 * Fixed a regression that prevented console restoration after
   a VT switch on some GPUs.
 * Fixed a bug that could cause a system hang when resuming from
   suspend with some GPUs.
 * Fixed a bug that caused slow or stuttering frame rates in
   applications that use GLX_EXT_swap_control_tear while
   G-SYNC is active.
 * Fixed a bug in the NVIDIA VDPAU driver that caused
   VdpVideoSurfaceGetBitsYCbCr() of H.265/HEVC content to have
   interlaced artifacts.
 * Fixed a bug that caused the X driver to not correctly report
   the "BlendOrder" MetaMode token when querying the MetaMode
   through, e.g., `nvidia-settings --query CurrentMetaMode`.
 * Fixed a bug that prevented nvidia-installer from displaying
   a targeted error message when optional kernel modules fail
   to load.
 * Updated nvidia-installer to label kernel modules with SELinux
   file type 'modules_object_t'. Some system SELinux policies only
   permit loading of kernel modules with this SELinux file type.
 * Removed support for checking for and downloading updated driver
   packages and precompiled kernel interfaces from
   nvidia-installer. This functionality was limited to unencrypted
   ftp and http, and was implemented using code that is no longer
   actively maintained.

------------------------------------------------------------------
Wed  6 Sep 09:55:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 384.69

* Added support for the following GPU:

Quadro P4000 with Max-Q Design

* Fixed an intermittent hang when using Vulkan to present
   directly to display with the VK_KHR_display extension.
   SteamVR was particularly affected by that hang.
 * Disabled G-SYNC in desktop environments, such as Budgie,
   that use libmutter-0.so.

An existing rule to disable G-SYNC for libmutter.so no longer
   applied after the library was renamed to libmutter-0.so.
 * Updated nvidia-installer to label kernel modules with SELinux
   file type 'modules_object_t'. Some system SELinux policies only
   permit loading of kernel modules with this SELinux file type.
 * Removed support for checking for and downloading updated driver
   packages and precompiled kernel interfaces from
   nvidia-installer. This functionality was limited to
   unencrypted ftp and http, and was implemented using code
   that is no longer actively maintained.

------------------------------------------------------------------
Thu 10 Aug 13:58:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 384.59

* Added support for the following GPUs:
        GeForce GT 1030
        GeForce MX150
 * Fixed a bug that prevented changes to stereo eye assignment
   from getting applied from the nvidia-settings control panel.
 * Fixed a bug that caused S4 suspend (also known as "hibernate")
   to hang during suspend when SLI was enabled.
 * Fixed a bug where devices would not be properly enumerated
   by the Vulkan driver.  See the "Known Issues" section of
   the README for more details.
 * Fixed a bug that could cause OpenGL applications to crash
   after calling glDeleteBuffers on VBOs that have been
   remapped with ARB_vertex_attrib_binding.
 * Fixed a bug that could sometimes cause OpenGL applications
   to lock up until the X server receives input.
 * Fixed a bug that caused nvidia-settings to drop device BusID
   values when making changes to an existing X configuration file.
 * Fixed a regression that prevented nvidia-xconfig from
   querying some GPUs, e.g. when running `nvidia-xconfig -a`.
 * Fixed a bug that caused VDPAU playback to be corrupted when
   extended to coordinates beyond 16384 pixels.
 * Updated nvidia-persistenced to initialize nvidia-modeset.ko in
   addition to nvidia.ko when setting persistence mode.
 * Restored several sanity checks that were inadvertently removed
   from the kernel module build process in the 355.06 driver.
 * Added support for a "Nearest" transform filter in the X driver.
   This causes the X driver to use nearest neighbor filtering when
   performing screen transformations.  The filter can be requested
   through the 'filter' argument to RandR's RRSetCrtcTransform, or
   through the 'ResamplingMethod' MetaMode token.
 * Fixed a bug where nvidia-installer would install a wrong
   version of the Vulkan ICD configuration file when GLVND is
   disabled for the GLX client.
 * Fix a bug with GLX_EXT_buffer_age where incorrect buffer age
   values would be reported for SLI AFR configurations. In such
   configurations buffer age may now be greater than 3,
   the previous maximum buffer age.
 * Fixed a bug that could cause hanging and Xids when performing
   RandR transforms with Overlay and SLI enabled.
 * Extended the information reported by the NVIDIA Xinerama
   X extension to report PRIME displays in addition to
   directly-connected displays.
 * Fixed a bug that caused HDMI audio devices to appear or
   disappear inconsistently when HDMI devices were hotplugged or
   unplugged.
 * Fixed a bug that could cause driver errors when setting modes
   on X screens running at Depth 8 or Depth 15.
 * Fixed a bug that could cause intermittent kernel panics when
   running with PRIME Sync.
 * Fixed a bug that caused a kernel panic when hotplugging HDMI
   displays on some Zotac mini PCs.
 * Updated nvidia-installer to label kernel modules with SELinux
   file type 'modules_object_t'. Some system SELinux policies only
   permit loading of kernel modules with this SELinux file type.
 * Removed support for checking for and downloading updated
   driver packages and precompiled kernel interfaces from
   nvidia-installer. This functionality was limited to unencrypted
   ftp and http, and was implemented using code that is no longer
   actively maintained.

------------------------------------------------------------------
Tue  4 Jul 20:11:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 384.47

* Added support for the following GPUs:
        GeForce GT 1030
        GeForce MX150
 * Fixed a bug that could cause OpenGL applications to crash after
   calling glDeleteBuffers on VBOs that have been remapped with
   ARB_vertex_attrib_binding.
 * Fixed a bug that could sometimes cause OpenGL applications to
   lock up until the X server receives input.
 * Fixed a bug that caused nvidia-settings to drop device BusID
   values when making changes to an existing X configuration file.
 * Fixed a regression that prevented nvidia-xconfig from querying
   some GPUs, e.g. when running `nvidia-xconfig -a`.
 * Fixed a bug that caused VDPAU playback to be corrupted when
   extended to coordinates beyond 16384 pixels.
 * Updated nvidia-persistenced to initialize nvidia-modeset.ko in
   addition to nvidia.ko when setting persistence mode.
 * Restored several sanity checks that were inadvertently removed
   from the kernel module build process in the 355.06 driver.
 * Added support for a "Nearest" transform filter in the X driver.
   This causes the X driver to use nearest neighbor filtering when
   performing screen transformations.  The filter can be requested
   through the 'filter' argument to RandR's RRSetCrtcTransform, or
   through the 'ResamplingMethod' MetaMode token.
 * Fixed a bug where nvidia-installer would install a wrong
   version of the Vulkan ICD configuration file when GLVND is
   disabled for the GLX client.
 * Fixed a bug that could cause driver errors when setting modes
   on X screens running at Depth 8 or Depth 15.
 * Fixed a bug that could cause intermittent kernel panics when
   running with PRIME Sync.
 * Fixed a bug that caused a kernel panic when hotplugging HDMI
   displays on some Zotac mini PCs.
 * Updated nvidia-installer to label kernel modules with SELinux
   file type 'modules_object_t'. Some system SELinux policies only
   permit loading of kernel modules with this SELinux file type.
 * Removed support for checking for and downloading updated driver
   packages and precompiled kernel interfaces from
   nvidia-installer. This functionality was limited to unencrypted
   ftp and http, and was implemented using code that is no longer
   actively maintained.

------------------------------------------------------------------
Sat 10 Jun 19:47:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 381.09

* Added support for GeForce GT 1030
 * Fixed a bug that caused the GLX_EXT_buffer_age buffer age
   extension to return incorrect values for stereo drawables
   when using passive stereo modes 5 through 9.
 * Fixed a bug in Vulkan direct to display where DP1.2 monitors
   were not being enumerated.
 * Improved compatibility with recent kernels.
 * Fixed a bug that caused "nvidia-settings --query all" to
   print many duplicate entries.
 * Fixed a bug that caused applications to crash in some
   situations when calling glXMakeCurrent while OpenGL
   threaded optimizations were enabled. This frequently
   occurred when Steam was attempting to make a video appear
   full-screen.
 * Fixed a bug that caused VDPAU applications to use the blit
   presentation queue when a previous VDPAU application
   didn't shut down cleanly.
 * Fixed hangs and crashes that could occur when an OpenGL
   context is created while the system is out of available
   memory.
 * Fixed a bug that caused corruption when OpenGL windows
   were moved or resized.
 * Fixed a bug that caused X screens that use
   Option "UseDisplayDevice" "none" to be resized to
   640x480 when using "xrandr -s" to change the screen
   configuration.
 * Fixed a kernel crash that occurred when attempting to
   map large user memory allocations into CUDA.
 * Disabled OpenGL threaded optimizations by default,
   initially enabled in 378.09, due to various reports of
   instability.
 * Added support for the following Vulkan extensions:
        VK_EXT_acquire_xlib_display
        VK_EXT_display_control
        VK_EXT_display_surface_counter
        VK_EXT_direct_mode_display
        VK_KHX_external_memory
        VK_KHX_external_memory_fd
        VK_KHX_external_semaphore
        VK_KHX_external_semaphore_fd These extensions
          require a Vulkan loader version >= 1.0.42.
 * Removed the X driver's logo splash screen and the
   corresponding NoLogoand LogoPath xorg.conf options.
 * Added the "ResamplingMethod" MetaMode option, adding
   support for bicubic resampling methods when scaling screen
   transformations are in use.  See the README for more details.

------------------------------------------------------------------
Sun 28 Apr 19:42:00 CET 2017 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 381.09

* Added support for the following GPUs:
        GeForce GTX 1080 Ti
        Quadro M520
        TITAN Xp
        Quadro P3000
 * Improved compatibility with recent kernels.
 * Fixed a bug that caused "nvidia-settings --query all" to print
   many duplicate entries.
 * Fixed a bug that caused applications to crash in some situations
   when calling glXMakeCurrent while OpenGL threaded optimizations
   were enabled.

This frequently occurred when Steam was attempting to make
    a video appear full-screen.

* Fixed a bug that caused VDPAU applications to use the blit
   presentation queue when a previous VDPAU application didn't shut
   down cleanly.
 * Fixed hangs and crashes that could occur when an OpenGL context
   is created while the system is out of available memory.
 * Fixed a bug that caused corruption when OpenGL windows were
   moved or resized.
 * Fixed a bug that caused X screens that use
   Option "UseDisplayDevice" "none" to be resized to 640x480 when
   using "xrandr -s" to change the screen configuration.
 * Fixed a kernel crash that occurred when attempting to map
   large user memory allocations into CUDA.
 * Disabled OpenGL threaded optimizations by default, initially
   enabled in 378.09, due to various reports of instability.
 * Added support for the following Vulkan extensions:
        VK_EXT_acquire_xlib_display
        VK_EXT_display_control
        VK_EXT_display_surface_counter
        VK_EXT_direct_mode_display
        VK_KHX_external_memory
        VK_KHX_external_memory_fd
        VK_KHX_external_semaphore
        VK_KHX_external_semaphore_fdThese extensions require
        a Vulkan loader version >= 1.0.42.
 * Removed the X driver's logo splash screen and the corresponding
   NoLogo and LogoPath xorg.conf options.
 * Added the "ResamplingMethod" MetaMode option, adding support
   for bicubic resampling methods when scaling screen
   transformations are in use.See the README for more details.
 * Fixed a bug that left HDMI and DisplayPort audio muted after
   a framebuffer console mode was restored. For some displays,
   this caused the display to remain blank.
 * Fixed a bug that caused audio over DisplayPort to stop
   working when the monitor was unplugged and plugged back in or
   awoken from DPMS power-saving mode.
 * Fixed a regression that caused corruption in certain
   applications, such as window border shadows in Unity, after
   resuming from suspend.
 * Fixed a bug that prevented PRIME Sync from working on
   notebooks with GeForce GTX 4xx and 5xx series GPUs.

------------------------------------------------------------------
Sun 22 Jan 11:39:00 CET 2017 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
  speedup installation

- Use the legacy GLX library

- Update to 378.09

* Added support for the following GPU(s):

Quadro M1200
        Quadro M2200
 * Added support for the ARB_parallel_shader_compile extension
   to allow multi-threaded compilation of GLSL shaders.
 * Updated the X driver to ignore any Virtual Reality Head Mounted
   Displays (HMDs).  See the "AllowHMD" X configuration option
   in the README for details.
 * The driver will now advertise GLX FBConfigs with no depth bits
   on depth 30 X screens.
 * Added support in nvidia-settings to view configured PRIME
   displays. To enable PRIME displays, see "Offloading Graphics
   Display with RandR 1.4" in the README.
 * Added infrastructure which enables the NVIDIA EGL driver
   to load EGL external platform libraries that add client-side
   support for new window systems, beyond the existing
   libnvidia-egl-wayland.so.1. For more details, see:

- https://github.com/NVIDIA/eglexternalplatform
        - https://github.com/NVIDIA/egl-wayland
 * Added support for the following Vulkan extensions:

VK_KHR_display
        VK_KHR_display_swapchain
 * Enabled OpenGL threaded optimizations by default in the driver.
   Refer to the "Threaded Optimizations" section in the
   "Specifying OpenGL Environment Variable Settings" chapter of
   the README for details.
   These optimizations will self-disable when they are degrading
   performance.  As a result, performance should be unchanged for
   many applications, and increased for those that benefit from
   threaded optimizations and were not already forcing them enabled.

------------------------------------------------------------------
Thu 15 Dec 09:41:00 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
  speedup installation

- Use the legacy GLX library

- Update to 375.26

* Added support for the following GPU(s):
        Quadro M3000 SE
 * Fixed a regression that prevented the backlight on some notebook
   computer displays from turning back on after being shut off.
 * Fixed a regression that prevented the console from being restored
   properly when using SLI.
 * Fixed a bug that caused installer manifest entries for some 32-bit
   compatibility libraries to be duplicated in the installer package.
   These entries led nvidia-installer to issue warning messages when
   installing the 32-bit compatibility libraries, for example:
   'Cannot create symlink /usr/lib/libEGL.so (File exists)'.
 * Fixed a regression that could cause the nvidia-settings control
   panel to crash on startup with certain GPU configurations.
 * Fixed a regression that prevented the GLX_NV_swap_group extension
   from working when using SLI or Quadro Sync.
 * Fixed a long-standing bug that caused the NVIDIA X driver to not
   correctly detect AC/battery hotplug events on notebooks.
 * Fixed an interaction problem between the Linux kernel's
   CONFIG_HARDENED_USERCOPY feature (new in Linux kernel 4.8) and
   nvidia-drm.ko with modeset=1 enabled. This problem caused
   CONFIG_HARDENED_USERCOPY to erroneously halt the system,
   issuing reports of the form:

usercopy: kernel memory overwrite attempt detected to
    ffff8803e8ec7ce0 (<process stack>) (8 bytes)

* Fixed a bug that prevented nvidia-bug-report.sh from finding
   relevant messages in kernel log files.
 * Added support for the screen_info.ext_lfb_base field, on kernels
   that have it, in order to properly handle UEFI framebuffer
   consoles with physical addresses above 4GB.

------------------------------------------------------------------
Thu  1 Dec 11:10:00 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
  speedup installation

- Use the legacy GLX library

- Update to 375.20

* Added support for the following GPUs:
        GeForce GTX 1050
        GeForce GTX 1050 Ti
        Quadro M620
        Quadro M5000 SE
        Quadro M3000 SE
 * Fixed a bug that could cause displays in SLI Mosaic to blank
   when applying a transformation matrix.
 * Added EGL support to the GL Vendor Neutral Dispatch Library
   (libGLVND). The installer package now includes both GLVND and 
   non-GLVND versions of the EGL libraries: the --glvnd-egl-client and
   --no-glvnd-egl-client options in nvidia-installer can be used to
   select which to install.
 * Fixed a bug that prevented G-SYNC from working on notebook displays.
 * Fixed a bug that caused DisplayPort multistream devices to go blank
   after the console is restored.
 * Fixed a bug that caused a kernel crash when starting X for the second
   time when more than one DisplayPort multistream device is connected to
   a single DisplayPort connector via a branch device.
 * Updated nvidia-settings to not have a build-time dependence on an
   external nvml development package (a regression introduced in 375.10).
 * Fixed a crash in nvidia-settings when adding Application Profile Rule
   and Profile entries.
 * Removed the "Enable Tooltip" option in nvidia-settings for the GTK 2
   interface.
 * Added new X configuration options:

ForceCompositionPipeline
    ForceFullCompositionPipeline

which override the MetaMode tokens with the same names.

* Fixed a bug that caused issues with panning and cursor constraining
   when mixing PRIME-driven displays with natively driven displays.
 * Fixed a bug that caused long delays when leaving the VT or disabling
   a display device while an OpenGL application is running.
 * Improved console restore behavior on systems that use the UEFI Graphics
   Output Protocol, and most vesafb modes.
 * Added support for the RandR TILE property added in RandR 1.5.
 * Raised the on-disk OpenGL shader cache size from 64MB to 128MB. Refer
   to the "Specifying OpenGL Environment Variable Settings" section of the
   driver README for details on how to select its location or disable it.
 * Fixed a bug in synchronization primitives shared between X and OpenGL.
 * Added support for X.Org xserver ABI 23 (xorg-server 1.19)
 * Fixed a bug that allowed nvidia-installer to attempt loading kernel
   modules that were built against non-running kernels.

------------------------------------------------------------------
Sat 22 Sep 13:49:00 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
  speedup installation

- Use the legacy GLX library

- Update to 375.10

* Added support for the following GPUs:
        Quadro P6000
        Quadro P5000
        GeForce GTX 1050
        GeForce GTX 1050 Ti 
 * Added new X configuration options:
        ForceCompositionPipeline
        ForceFullCompositionPipelinewhich override the MetaMode
        tokens with the same names.
 * Fixed a bug that caused issues with panning and cursor constraining
   when mixing PRIME-driven displays with natively driven displays.
 * Fixed a bug that caused long delays when leaving the VT or
   disabling a display device while an OpenGL application is running.
 * Improved console restore behavior on systems that use the
   UEFI Graphics Output Protocol, and most vesafb modes.
 * Added support for the RandR TILE property added in RandR 1.5.
 * Fixed a bug that prevented nvidia-bug-report.sh from finding
   relevant messages in kernel log files.
 * Fixed a bug that allowed nvidia-installer to attempt loading
   kernel modules that were built against non-running kernels.

------------------------------------------------------------------
Thu  8 Sep 21:00:00 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
  speedup installation

- Use the legacy GLX library

- Update to 370.28

* Fixed undefined symbol references in libnvidia-glcore.so.
 * Fixed a potential hang in Vulkan applications such as
   vkQuake and DOTA2 that use vkFences for present
   synchronization.
 * Fixed a bug that caused the driver to not set HDMI
   YUV 420 4K modes correctly on some TVs, such as the
   VIZIO D40u-D1.
 * Updated CurrentMetaMode reporting via the NV-CONTROL API
   to reflect whether ForceCompositionPipeline or
   ForceFullCompositionPipeline are set in the current MetaMode.
 * Added the ability to over- and under-clock certain
   GeForce GPUs in the GeForce GTX 1000 series and later.
   For GPUs that allow it, an offset can be applied to clock
   values in some clock domains of all performance levels.
   This clock manipulation is done at the user's own risk.
   See the README documentation of the "CoolBits" X configuration
   option for more details.
 * Implemented initial support for PRIME Synchronization to
   synchronize flipping between an NVIDIA PRIME display source
   and a separate PRIME display sink. This support is 
   experimental and currently requires a prerelease X.org X server.
 * Fixed a bug that prevented Vulkan applications from
   presenting from multiple queues to the same X11 swapchain.
 * Added the "PixelShiftMode" MetaMode option, enabling support
   for 4K and 8K pixel shift displays.  See the README for details.

------------------------------------------------------------------
Sat 20 Aug 19:19:26 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
  speedup installation

- Use the legacy GLX library

- Update to 370.23

* Added the ability to over- and under-clock certain 
   GeForce GPUs in the GeForce GTX 1000 series and later.
   For GPUs that allow it, an offset can be applied to clock
   values in some clock domains of all performance levels.
   This clock manipulation is done at the user's own risk.
   See the README documentation of the "CoolBits" X configuration
   option for more details.
 * Fixed a bug that prevented Vulkan applications from
   presenting from multiple queues to the same X11 swapchain.
 * Added the "PixelShiftMode" MetaMode option, enabling support
   for 4K and 8K pixel shift displays.  See the README for details.

------------------------------------------------------------------
Sun  7 Aug 10:00:01 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
  speedup installation

- Use the legacy GLX library

- Update to 367.35

* Fixed a regression that could cause console corruption
   when resuming from suspend.
 * Improved buffer write performance of the nvidia-drm
   DRM KMS driver by using write-combined DRM Dumb Buffers
   where available.
 * Fixed a bug that caused X to crash when applying changes
   to the RandR CscMatrix property while VT-switched away from X.
 * Fixed a bug that caused a crash when exiting nvidia-settings
   on displays with 8 or 15 bit color depths.
 * Added support for VDPAU Feature Set H to the NVIDIA VDPAU 
   driver. GPUs with VDPAU Feature Set H are capable of
   hardware-accelerated decoding of 8192x8192 (8k)
   H.265/HEVC video streams.
 * Fixed a bug that caused the X server to sometimes skip
   displaying Vulkan frames when the Composite extension is
   enabled.
 * Added support for querying clock values on Pascal GPUs.
 * Removed the Base Mosaic configuration option from
   nvidia-settings on systems where the feature is not
   actually supported.
 * Fixed a bug that caused nvidia-smi to report an inaccurate
   version number.
 * Fixed a bug that could lead to a system crash if there was
   a peer-to-peer mapping still active during CUDA context
   teardown.
 * Fixed a bug that prevented nvidia-bug-report.sh from
   finding relevant messages in kernel log files.

------------------------------------------------------------------
Tue 14 Jun 13:30:55 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
  speedup installation

- Use the legacy GLX library

- Update to 367.27

* Added support for the following GPUs:
        GeForce GTX 1080
        GeForce GTX 1070
 * Added support for VDPAU Feature Set H to the NVIDIA VDPAU
   driver. GPUs with VDPAU Feature Set H are capable of
   hardware-accelerated decoding of
   8192x8192 (8k) H.265/HEVC video streams.
 * Fixed a bug that caused the X server to sometimes skip
   displaying Vulkan frames when the Composite extension is
   enabled.
 * Fixed a bug that would cause OpenGL applications to crash
   when creating a context on one X display connection, then
   making it current with no associated drawable on another
   X display connection.  This fixes a crash when starting
   some versions of Matlab.
 * Fixed OpenGL presentation to SDI through
   the GLX_NV_video_out and GLX_NV_present_video extensions,
   which was broken by the introduction of the nvidia-modeset
   kernel module in 358.09.
 * Fixed a bug that caused an incorrect offset to be applied
   when using the full composition pipeline on a display whose
   image has both a rotation and a ViewportOut offset applied.
 * Fixed a bug that could cause nvidia-settings to crash on some
   systems when responding to events such as hotplugging
   DisplayPort devices.
 * Fixed a bug that could cause crashes in OpenGL applications
   which use glTextureView() with a non-zero minlevel.
 * Enhanced the Display Device information page in nvidia-settings
   with additional information for DisplayPort devices to reflect
   attributes which are specific to DisplayPort connections.
 * Fixed a bug which could cause deleted application profiles to
   appear when editing rules in the nvidia-settings control panel.
 * Fixed a bug that caused hangs when a G-SYNC monitor is unplugged
   and a non-G-SYNC monitor is connected while G-SYNC is active.
 * Fixed a bug that caused "nvidia-modeset: ERROR: GPU:0: Activating
   G-SYNC failed" to be printed to the system log if a G-SYNC monitor
   is connected and stereo is enabled in xorg.conf on a configuration
   that doesn't support it.
 * Added the NV_robustness_video_memory_purge OpenGL extension, which
   allows applications to know when a mode switching or power event
   purged the contents of FBOs and BOs residing in video memory.
 * Fixed a bug that prevented HDMI 2.0 4K monitors from waking up
   from sleep or hot-replug.
 * Fixed a bug that could lead to a system crash if there was
   a peer-to-peer mapping still active during CUDA context teardown.

------------------------------------------------------------------
Tue 14 Jun 13:20:22 CET 2016 - bumblebee.obs@gmail.com

- Use single DKMS instance for all the nVidia modules to
  speedup installation

------------------------------------------------------------------
Fri 27 Apr 23:31:29 CET 2016 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 367.18

* Added support for the following GPUs:
        GeForce GTX 1080
 * Fixed a bug that would cause OpenGL applications to crash when
   creating a context on one X display connection, then making it
   current with no associated drawable on another X display
   connection.  This fixes a crash when starting some versions of
   Matlab.
 * Fixed OpenGL presentation to SDI through the GLX_NV_video_out
   and GLX_NV_present_video extensions, which was broken by the
   introduction of the nvidia-modeset kernel module in 358.09.
 * Fixed a bug that caused an incorrect offset to be applied when
   using the full composition pipeline on a display whose image has
   both a rotation and a ViewportOut offset applied.
 * Fixed a bug that could cause nvidia-settings to crash on some
   systems when responding to events such as hotplugging
   DisplayPort devices.
 * Fixed a bug that could cause crashes in OpenGL applications
   which use glTextureView() with a non-zero minlevel.
 * Enhanced the Display Device information page in nvidia-settings
   with additional information for DisplayPort devices to reflect
   attributes which are specific to DisplayPort connections.
 * Fixed a bug which could cause deleted application profiles to
   appear when editing rules in the nvidia-settings control panel.
 * Fixed a bug that caused hangs when a G-SYNC monitor is unplugged
   and a non-G-SYNC monitor is connected while G-SYNC is active.
 * Fixed a bug that caused "nvidia-modeset: ERROR: GPU:0: Activating
   G-SYNC failed" to be printed to the system log if a G-SYNC monitor
   is connected and stereo is enabled in xorg.conf on a configuration
   that doesn't support it.
 * Added the NV_robustness_video_memory_purge OpenGL extension, which
   allows applications to know when a mode switching or power event
   purged the contents of FBOs and BOs residing in video memory.
 * Fixed a bug that prevented HDMI 2.0 4K monitors from waking up
   from sleep or hot-replug.
 * Fixed a bug that sometimes prevented flipping from being enabled
   on systems with multiple displays.
 * Fixed a bug that could cause applications to crash when using
   the EGL_EXT_platform_device extension on a system with
   multiple GPUs.
 * Fixed a bug that could cause nvidia-installer's runtime loader
   test to fail spuriously on some systems.
 * The NVIDIA Unified Virtual Memory kernel module, nvidia-uvm.ko,
   now has a minimum kernel requirement of Linux 2.6.32. On older
   kernel versions, nvidia-uvm.ko will be compiled as a stub kernel
   module which does not provide any functionality.
 * Updated the libglvnd snapshot included in the NVIDIA driver
   package to libglvnd commit b7d75429677eecc00c3701aaa4deac1304bc51ff.
   This contains a new revision of the libglvnd ABI. The driver is 
   not compatible with a libglvnd older than commit
   c5bcda3b848fe52d6ae6ef25c917431c06d62d27.

------------------------------------------------------------------
Wed 27 Apr 19:59:37 CET 2016 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 364.19

* Added support for the following GPUs:
        Quadro M6000 24GB
        Quadro M5500 
 * Fixed some locking issues in libnvidia-egl-wayland.so.
 * Fixed several libnvidia-egl-wayland.so interaction problems with
   buffer management Wayland protocols.
 * Fixed several EGL driver interaction problems with resizing
   windows in Wayland.
 * Fixed a bug that caused some DRM PRIME configurations to fail
   when DRM KMS was enabled (i.e., nvidia-drm.ko's modeset kernel
   module parameter was set to "1").
 * Fixed a bug that could cause a kernel crash when VDPAU was used
   while DRM KMS was enabled.
 * Changed the default OpenGL installation type to use the
   GLVND GLX client libraries rather than the legacy non-GLVND
   libraries.
 * Added initial support for Direct Rendering Manager Kernel
   Modesetting (DRM KMS).See the DRM KMS section of the README
   for details.
 * Added a new kernel module, nvidia-drm.ko, which registers as
   a DRM driver with both PRIME and DRM KMS support.
 * Added support for the following EGL extensions:

EGL_EXT_platform_wayland

to enable Wayland applications to run on NVIDIA's EGL
    implementation,

EGL_WL_bind_wayland_display

to enable Wayland compositors to run on NVIDIA's EGL
    implementation, and

EGL_EXT_device_drm
    EGL_EXT_output_drm
    EGL_EXT_stream_consumer_egloutput

to enable Mir and Wayland compositors to display their content
    through EGLDevice, EGLOutput, and EGLstreams.

* Added a Wayland platform library, libnvidia-egl-wayland.so, to
   allow Wayland compositors that support EGLDevice, EGLOutput, and
   EGLstreams to share EGL buffers with Wayland applications.
 * Fixed a bug that could cause incorrect frame rate reporting on
   Quadro Sync configurations with multiple GPUs.
 * Added support for the Vulkan API version 1.0.
 * Improved X colormap precision from 8 significant bits to 11 on
   GeForce GPUs.Quadro GPUs already used 11 bits of precision.
 * Added a new RandR property, CscMatrix, which specifies
   a 3x4 color-space conversion matrix.The matrix is applied after
   the X colormap and before the gamma ramp.This property is
   available on GF119 and newer GPUs.
 * Improved handling of the X gamma ramp on GF119 and newer
   GPUs.On these GPUs, the RandR gamma ramp is always 1024 entries
   and now applies to the cursor and VDPAU or workstation overlays
   in addition to the X root window.
 * Reworked how the NVIDIA driver registers with the Linux kernel's
   DRM subsystem for PRIME support.As a result, PRIME support
   requires Linux kernel version 3.13 or newer (previously, PRIME
   support required Linux kernel version 3.10 or newer).
 * Improved the interactivity of applications that use a hardware
   cursor while G-SYNC is active.

------------------------------------------------------------------
Wed  6 Mar 23:27:05 CET 2016 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 364.15

* Added support for the following GPUs:
        Quadro M6000 24GB
 * Fixed several EGL driver interaction problems with resizing
   windows in Wayland.
 * Fixed a bug that caused some DRM PRIME configurations to fail when
   DRM KMS was enabled (i.e., nvidia-drm.ko's modeset kernel module
   parameter was set to "1").
 * Fixed a bug that could cause a kernel crash when VDPAU was used
   while DRM KMS was enabled.
 * Updated the libglvnd snapshot included in the NVIDIA driver package
   to libglvnd commit b7d75429677eecc00c3701aaa4deac1304bc51ff. This
   contains a new revision of the libglvnd ABI. The driver is not 
   compatible with a libglvnd older than
   commit c5bcda3b848fe52d6ae6ef25c917431c06d62d27.
 * Limited the default concurrency level in nvidia-settings to 32,
   to avoid hitting the maximum tasks limit on systems with many CPUs.

------------------------------------------------------------------
Wed  6 Mar 16:40:29 CET 2016 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 364.12

* Added support for the following GPUs:
        GeForce 920MX
        GeForce 930MX 
 * Fixed a regression that caused GPU exceptions and incorrect
   rendering when using pbuffers with EGLDevice.
 * Fixed a bug that caused nvidia-settings to crash when pairing
   glasses with the 3D Vision Pro transmitter on some systems.
 * Fixed a bug that caused installer manifest entries for some
   32-bit compatibility libraries to be duplicated in the installer
   package.
 * Fixed a regression that caused the HSync and VSync mode timing
   polarity flags to be inverted.
 * Changed the default OpenGL installation type to use the
   GLVND GLX client libraries rather than the legacy non-GLVND
   libraries.
 * Added initial support for Direct Rendering Manager Kernel
   Modesetting (DRM KMS).  See the DRM KMS section of the
   README for details.
 * Added a new kernel module, nvidia-drm.ko, which registers as
   a DRM driver with both PRIME and DRM KMS support.
 * Added support for the following EGL extensions:

EGL_EXT_platform_wayland

to enable Wayland applications to run on NVIDIA's EGL
    implementation,

EGL_WL_bind_wayland_display

to enable Wayland compositors to run on NVIDIA's EGL
    implementation, and

EGL_EXT_device_drm
    EGL_EXT_output_drm
    EGL_EXT_stream_consumer_egloutput

to enable Mir and Wayland compositors to display their content
    through EGLDevice, EGLOutput, and EGLstreams.
 * Added a Wayland platform library, libnvidia-egl-wayland.so, to
   allow Wayland compositors that support EGLDevice, EGLOutput, and
   EGLstreams to share EGL buffers with Wayland applications.
 * Fixed a bug that could cause incorrect frame rate reporting on
   Quadro Sync configurations with multiple GPUs.
 * Added support for the Vulkan API version 1.0.
 * Improved X colormap precision from 8 significant bits to 11 on
   GeForce GPUs.  Quadro GPUs already used 11 bits of precision.
 * Added a new RandR property, CscMatrix, which specifies a 3x4
   color-space conversion matrix.  The matrix is applied after
   the X colormap and before the gamma ramp.  This property is
   available on GF119 and newer GPUs.
 * Improved handling of the X gamma ramp on GF119 and newer GPUs.
   On these GPUs, the RandR gamma ramp is always 1024 entries and
   now applies to the cursor and VDPAU or workstation overlays in
   addition to the X root window
 * Reworked how the NVIDIA driver registers with the Linux kernel's
   DRM subsystem for PRIME support.  As a result, PRIME support
   requires Linux kernel version 3.13 or newer (previously, PRIME
   support required Linux kernel version 3.10 or newer).
 * Improved the interactivity of applications that use a hardware
   cursor while G-SYNC is active.

------------------------------------------------------------------
Wed  6 Mar 15:54:53 CET 2016 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 361.42

* Added support for the following GPUs:
        GeForce 920MX
        GeForce 930MX
        Quadro M6000 24GB
 * Limited the default concurrency level in nvidia-settings
   to 32, to avoid hitting the maximum tasks limit on systems
   with many CPUs.
 * Fixed a regression that caused GPU exceptions and incorrect
   rendering when using pbuffers with EGLDevice.
 * Fixed a bug that caused nvidia-settings to crash when pairing
   glasses with the 3D Vision Pro transmitter on some systems.
 * Fixed a bug that caused installer manifest entries for some
   32-bit compatibility libraries to be duplicated in the installer
   package.
 * Fixed a regression that caused the HSync and VSync mode timing
   polarity flags to be inverted.

------------------------------------------------------------------
Thu 11 Feb 20:22:09 CET 2016 - bumblebee.obs@gmail.com

- Use the legacy GLX library

- Update to 361.28

* Added support for the following GPU:
        GeForce 945A
 * Added a legacy, non-GLVND libGL.so GLX client library to the
   NVIDIA Linux driver installer package, and the ability to
   select between a GLVND or non-GLVND GLX client library at
   installation time. This allows users to install the legacy
   non-GLVND GLX client library in order to work around
   compatibility issues which may arise due to GLX applications
   which depend upon behaviors of the NVIDIA GLX client driver
   which are not defined by the Linux OpenGL ABI version 1.0.

By default, nvidia-installer will install the legacy,
   non-GLVND GLX client libraries. The --glvnd-glx-client
   command line option can be used to override the default,
   and install the GLVND GLX client libraries instead.
   Please contact the vendors of any applications that are not
   compatible with GLVND to ensure that their applications be
   updated for compatibility with GLVND.

The presence of multiple GLX client libraries in the
   package has implications for repackagers of the NVIDIA
   driver; see the libGL.so entry in the "Installed Components"
   chapter of the README for details.

The OpenGL Vendor-Neutral Driver (GLVND) infrastructure 
   is now included and supported by the NVIDIA GLX and OpenGL
   drivers.  This should not cause any visible changes in
   behavior for end users, but some internal driver component
   libraries have been renamed and/or moved as a result.
   These changes may affect scripts that rely on the presence
   of NVIDIA OpenGL driver components other than those specified
   in the Linux OpenGL ABI version 1.0, maintainers of
   alternative NVIDIA driver installation packages, and
   applications which rely on the presence of any
   non- OpenGL/GLX symbols in the libGL.so.1 library and
   its dependencies in any way.

Please see:

https://github.com/NVIDIA/libglvnd

For more information on the GLVND project.

The Linux OpenGL ABI version 1.0 specification is available at:

https://www.opengl.org/registry/ABI

* Updated nvidia-installer to run ldconfig(8) and depmod(8)
   after uninstalling an existing driver, instead of only
   running these two commands when installing a new driver.
 * Removed the VDPAU wrapper and trace libraries
   libvdpau.so.1 and libvdpau_trace.so.1 from the driver package.
   These libraries may be available via your distribution's package
   management system, or can be compiled from the sources
   available at:

http://people.freedesktop.org/~aplattner/vdpau/

* Please see

http://freedesktop.org/wiki/Software/VDPAU/

for more information.

* Fixed a bug in the EGL driver where a mutex was unlocked more
   than once.  This triggers undefined behavior, and in particular,
   if lock elision is enabled in glibc, may result in a segmentation
   fault.

------------------------------------------------------------------
Mon  8 Feb 12:18:16 CET 2016 - bumblebee.obs@gmail.com

- Update to 361.18

* Added support for the following GPUs:
        GeForce 940MX
        Quadro M500M
 * Fixed a bug in the EGL driver where a mutex was unlocked
   more than once. This triggers undefined behavior, and in
   particular, if lock elision is enabled in glibc, may
   result in a segmentation fault.
 * The OpenGL Vendor-Neutral Driver (GLVND) infrastructure
   is now included and supported by the NVIDIA GLX and OpenGL
   drivers.  This should not cause any visible changes in
   behavior for end users, but some internal driver component
   libraries have been renamed and/or moved as a result.
   These changes may affect scripts that rely on the presence
   of NVIDIA OpenGL driver components other than those specified
   in the Linux OpenGL ABI version 1.0, maintainers of
   alternative NVIDIA driver installation packages, and
   applications which rely on the presence of any
   non- OpenGL/GLX symbols in the libGL.so.1 library and
   its dependencies in any way.

Please see:
    https://github.com/NVIDIA/libglvnd

For more information on the GLVND project.

The Linux OpenGL ABI version 1.0 specification is available at:
    https://www.opengl.org/registry/ABI

* Updated nvidia-installer to run ldconfig(8) and depmod(8)
   after uninstalling an existing driver, instead of only running
   these two commands when installing a new driver.
 * Removed the VDPAU wrapper and trace libraries libvdpau.so.1 and
   libvdpau_trace.so.1 from the driver package.  These libraries
   may be available via your distribution's package management
   system, or can be compiled from the sources available at:

http://people.freedesktop.org/~aplattner/vdpau/

Please see

http://freedesktop.org/wiki/Software/VDPAU/ for more information.

------------------------------------------------------------------
Sat  9 Jan 19:16:14 CET 2016 - bumblebee.obs@gmail.com

- Update to 361.16

* The OpenGL Vendor-Neutral Driver (GLVND) infrastructure is
   now included and supported by the NVIDIA GLX and OpenGL drivers.
   This should not cause any visible changes in behavior for
   end users, but some internal driver component libraries have
   been renamed and/or moved as a result. These changes may affect
   scripts that rely on the presence of NVIDIA OpenGL driver
   components other than those specified in the Linux OpenGL ABI
   version 1.0, maintainers of alternative NVIDIA driver
   installation packages, and applications which rely on the
   presence of any non- OpenGL/GLX symbols in the libGL.so.1
   library and its dependencies in any way.

Please see:
    https://github.com/NVIDIA/libglvnd

For more information on the GLVND project.

The Linux OpenGL ABI version 1.0 specification is available at:
    https://www.opengl.org/registry/ABI

* Updated nvidia-installer to run ldconfig(8) and depmod(8) after
   uninstalling an existing driver, instead of only running these
   two commands when installing a new driver.
 * Removed the VDPAU wrapper and trace libraries libvdpau.so.1 and
   libvdpau_trace.so.1 from the driver package.  These libraries may
   be available via your distribution's package management system,
   or can be compiled from the sources available at:

http://people.freedesktop.org/~aplattner/vdpau/

Please see

http://freedesktop.org/wiki/Software/VDPAU/ for more information.

-------------------------------------------------------------------
Tue Dec 01 13:37:45 CEST 2015 - bumblebee.obs@gmail.com

- Update to 358.16

* Fixed a regression, introduced in 358.09, that caused
   incorrect rendering of OpenGL stereo applications in
   combination with Quadro Sync on certain GPUs.
 * Fixed a regression, introduced in 358.09, that caused
   OpenGL stereo applications to hang when SLI AFR, SFR,
   or SLIAA modes were enabled.
 * Fixed a regression, introduced in 358.09, that caused
   the system to hang while launching OpenGL applications
   when some SLI Mosaic topologies were in use.
 * Fixed a bug that could cause some G-SYNC monitors to
   flicker on Kepler-based GPUs when running at low frame
   rates.
 * Fixed a regression that could cause OpenGL or VDPAU
   applications to hang in Xinerama layouts which include
   multiple X screens that are driven by the same GPU.
 * Added a fallback to allow GLX to function when UNIX domain
   socket communication is blocked between NVIDIA client-side
   GLX and NVIDIA server-side GLX. For example, the default
   SELinux policy on Fedora 22 prevents the NVIDIA 358.09 GLX
   driver from working in GDM3:

https://bugzilla.redhat.com/show_bug.cgi?id=1271401

* Fixed a bug that could cause nvidia-installer to crash when
   installing from a driver package that has had precompiled
   kernel interfaces added to it (e.g., by using the
   "--add-this-kernel" option).
 * Fixed a regression from 358.09 that caused G-SYNC monitors
   configured to use 3D Vision stereo to go blank and report
   an unsupported signal.
 * Fixed a regression from 358.09 that caused OpenGL
   applications that failed to negotiate permission to perform
   glXSwapBuffers via flipping to stop updating the screen.
   This was triggered on Fedora 22 where the SELinux system policy
   prevents gnome-shell from communicating with the X server.

Now, OpenGL applications that fail to negotiate flipping
    will fall back to glXSwapBuffers via blitting.

See https://bugzilla.redhat.com/show_bug.cgi?id=1271401
    for more details.

nvidia-modeset.ko does not provide any new user-visible
    functionality or interfaces to third party applications.
    However, in a later release, nvidia-modeset.ko will be used as
    a basis for the modesetting interface provided by the kernel's
    direct rendering manager (DRM).

* Reduced flickering and delays when transitioning into or out
   of G-SYNC mode.  As part of this change, monitors that have G-SYNC
   indicators in their on-screen displays will now always report
   that they are in G-SYNC mode.  The OpenGL G-SYNC visual indicator
   can be enabled in nvidia-settings to determine when G-SYNC is
   actually being used.
 * GLX protocol for the following OpenGL extension from OpenGL 3.0 has
   been promoted from unofficial to ARB approved official status:

GL_EXT_draw_buffers2

GLX protocol for the following OpenGL 3.0 commands:

BindBufferRangeNV
    BindBufferBaseNV
    BeginTransformFeedbackNV
    EndTransformFeedbackNV
    GetTransformFeedbackVaryingEXT
    TransformFeedbackVaryingsEXT
    which are part of the following extensions:

GL_NV_transform_feedback
    GL_EXT_transform_feedback

has been promoted from unofficial to ARB approved official status.

With the above changes, GLX protocol for OpenGL 3.0 has been
    promoted from unofficial to ARB approved official status.

* Added a new system memory allocation mechanism for large
   allocations in the OpenGL driver.  This mechanism allows unmapping
   the allocation from the process when it is not in use, making more
   virtual address space available to the application.  It is enabled
   by default on 32 bit OpenGL applications with Linux 3.11+ and
   glibc 2.19+.  Memory allocated this way will consume space in
   /dev/shm. Setting the environment variable
   __GL_DevShmPageableAllocations to 2 will disable this feature
 * Added support for OpenGL 4.3.
 * Added support for X.Org xserver ABI 20 (xorg-server 1.18).

-------------------------------------------------------------------
Tue Oct 20 17:01:46 CEST 2015 - bumblebee.obs@gmail.com

- Update to 358.09

* Fixed a regression that reduced OpenGL performance on
   headless X server configurations.
 * Fixed a memory leak that occurred after destroying a GLXWindow
   which still has the current context attached to it.
 * Fixed a bug which caused EGL pbuffers to be created with both
   a front and back buffer, instead of a back buffer only,
   as is required for EGL.
 * Added a new kernel module, nvidia-modeset.ko.  This new driver
   component works in conjunction with the nvidia.ko kernel module
   to program the display engine of the GPU.
   nvidia-modeset.ko does not provide any new user-visible functionality
   or interfaces to third party applications.  However, in a later
   release, nvidia-modeset.ko will be used as a basis for
   the modesetting interface provided by the kernel's direct
   rendering manager (DRM).
 * Reduced flickering and delays when transitioning into or out of
   G-SYNC mode.  As part of this change, monitors that have G-SYNC
   indicators in their on-screen displays will now always report that
   they are in G-SYNC mode.  The OpenGL G-SYNC visual indicator can be
   enabled in nvidia-settings to determine when G-SYNC is actually
   being used.
 * GLX protocol for the following OpenGL extension from OpenGL 3.0
   has been promoted from unofficial to ARB approved official status:

GL_EXT_draw_buffers2
    GLX protocol for the following OpenGL 3.0 commands:

BindBufferRangeNV
    BindBufferBaseNV
    BeginTransformFeedbackNV
    EndTransformFeedbackNV
    GetTransformFeedbackVaryingEXT
    TransformFeedbackVaryingsEXT

which are part of the following extensions:
    GL_NV_transform_feedback
    GL_EXT_transform_feedback

has been promoted from unofficial to ARB approved official status.

With the above changes, GLX protocol for OpenGL 3.0 has been promoted
   from unofficial to ARB approved official status.
 * Added a new system memory allocation mechanism for large allocations
   in the OpenGL driver.  This mechanism allows unmapping the allocation
   from the process when it is not in use, making more virtual address
   space available to the application.  It is enabled by default on 32 bit
   OpenGL applications with Linux 3.11+ and glibc 2.19+.  Memory allocated
   this way will consume space in /dev/shm. Setting the environment
   variable __GL_DevShmPageableAllocations to 2 will disable this feature

-------------------------------------------------------------------
Mon Oct 19 21:18:26 CEST 2015 - bumblebee.obs@gmail.com

- Update to 355.11

* Added support for the following GPUs:
        GeForce GTX 950
        Quadro M4000
        Quadro M5000 
 * Fixed a bug that caused applications using OpenCL or CUDA with
   OpenGL interopability to crash when using GLX indirect rendering.
 * Fixed a bug that caused VDPAU to only display the top half of
   a video frame when decoding and displaying H.265/HEVC encoded
   video streams.
 * Fixed a bug that could cause GPU exceptions when using glReadPixels()
   on the depth or stencil buffers of multisample windows while 
   resizing or moving the windows.
 * Fixed a bug that could cause data from one texture level to
   overwrite data from the next lowest level, when creating a texture
   view that did not include the higher of the two levels.
 * Fixed a bug that could cause the nvidia-settings control panel to
   crash when updating the display layout.
 * Corrected some erroneous reporting of support for GLX extensions:
   several extensions were being reported as supported for indirect
   GLX, which were in fact only supported under direct rendering.
 * Added support for the following EGL extensions:
        EGL_KHR_swap_buffers_with_damage
        EGL_NV_stream_consumer_gltexture_yuv
 * Replaced the build system for the NVIDIA kernel modules and updated
   the installer package and nvidia-installer to use the new build system
   and kernel module source code layout. For more information about
   the new build system and layout, see the README document at:

ftp://download.nvidia.com/XFree86/packaging/linux/new-kbuild-for-355/

* Added experimental full OpenGL support to EGL.
 * Marked the DeleteUnusedDP12Displays option as deprecated.

* Added support for VDPAU profiles added in VDPAU 0.9:
        VDP_DECODER_PROFILE_H264_BASELINE
        VDP_DECODER_PROFILE_H264_CONSTRAINED_BASELINE
        VDP_DECODER_PROFILE_H264_EXTENDED
        VDP_DECODER_PROFILE_H264_PROGRESSIVE_HIGH
        VDP_DECODER_PROFILE_H264_CONSTRAINED_HIGH 
 * Fixed a bug that prevented more than one RandR output from sharing
   user-added modes.
 * Fixed a bug that caused application-specified swap intervals to be
   ignored on some screens when using Xinerama.
 * Fixed a bug that caused user-supplied RandR modes with nonsensical
   combinations of the +HSync, -HSync, +VSync, and -VSync flags to
   corrupt the mode list.
 * Added support to make an OpenGL 3.0 and above context current
   without making current to any drawable.

-------------------------------------------------------------------
Fri Aug 07 09:51:36 CEST 2015 - bumblebee.obs@gmail.com

- Update to 352.30

* Fixed a bug that could cause data from one texture level to
   overwrite data from the next lowest level, when creating a
   texture view that did not include the higher of the two levels.
 * Fixed a bug that could cause the nvidia-settings control panel to
   crash when updating the display layout.
 * Corrected some erroneous reporting of support for GLX extensions:
   several extensions were being reported as supported for indirect
   GLX, which were in fact only supported under direct rendering.
 * Added support for the following EGL extensions:
        EGL_KHR_swap_buffers_with_damage
        EGL_NV_stream_consumer_gltexture_yuv
 * Replaced the build system for the NVIDIA kernel modules and
   updated the installer package and nvidia-installer to use the new
   build system and kernel module source code layout. For more
   information about the new build system and layout, see the README
   document at:
        ftp://download.nvidia.com/XFree86/packaging/linux/new-kbuild-for-355/
 * Added experimental full OpenGL support to EGL.
 * Marked the DeleteUnusedDP12Displays option as deprecated.

Version 1.5.0 of the X Resize and Rotate specification added a note
    that dynamically-created outputs will not be destroyed, so this
    option is deprecated and will be removed in a future driver release.
    Added support for VDPAU profiles added in VDPAU 0.9:
        VDP_DECODER_PROFILE_H264_BASELINE
        VDP_DECODER_PROFILE_H264_CONSTRAINED_BASELINE
        VDP_DECODER_PROFILE_H264_EXTENDED
        VDP_DECODER_PROFILE_H264_PROGRESSIVE_HIGH
        VDP_DECODER_PROFILE_H264_CONSTRAINED_HIGH
 * Fixed a bug that prevented more than one RandR output from sharing
   user-added modes.
 * Fixed a bug that caused application-specified swap intervals to be
   ignored on some screens when using Xinerama.
 * Fixed a bug that caused user-supplied RandR modes with nonsensical
   combinations of the +HSync, -HSync, +VSync, and -VSync flags to
   corrupt the mode list.
 * Added support to make an OpenGL 3.0 and above context current
   without making current to any drawable.

-------------------------------------------------------------------
Thu Aug 06 23:49:45 CEST 2015 - bumblebee.obs@gmail.com

- Update to 352.30

* Added support for the following GPU:
        GeForce 910M
 * Fixed a bug that caused poor video post-processing performance in
   VDPAU when operating on a large number of video streams simultaneously.
 * Fixed a bug that could cause an Xid error when terminating a video
   playback application using the overlay presentation queue in VDPAU.
 * Updated nvidia-installer to avoid recursing too deeply into kernel
   source trees under /usr/lib/modules, mirroring an existing restriction
   on recursion under /lib/modules.
 * Fixed a rare deadlock condition when running applications that use
   OpenGL in multiple threads on a Quadro GPU.
 * Fixed a kernel memory leak that occurred when looping hardware -
   accelerated video decoding with VDPAU on Maxwell-based GPUs.
 * Fixed a bug that caused the X server to crash if a RandR 1.4 output
   provided by a Sink Output provider was selected as the primary output
   on X.Org xserver 1.17 and higher.
 * Fixed a bug that caused waiting on X Sync Fence objects in OpenGL to
   hang indefinitely in some cases.
 * Fixed a bug that prevented OpenGL from properly recovering from hardware
   errors or sync object waits that had timed out.

-------------------------------------------------------------------
Thu Aug 06 23:34:31 CEST 2015 - bumblebee.obs@gmail.com

- Update to 352.21

* Added support for the following GPUs:
        GeForce 720A
        GeForce 920A
        GeForce 930A
        GeForce 940A
        GeForce GTX 950A
        GeForce GTX 980 Ti
 * Fixed a bug that caused the Display Configuration page of the
   nvidia-settings control panel to automatically generate layouts with
   multiple displays occupying the same position when enabling or disabling
   Base Mosaic.
 * Updated nvidia-settings to allow the use of the standard Display Configuration
   page when SLI Mosaic is enabled.
 * Fixed a bug that caused the kernel to report errors when unmapping DMA
   allocations on kernels with CONFIG_DEBUG_DMA_API enabled.
 * Added GLX Protocol support for the following OpenGL extensions:
        GL_ARB_copy_buffer
        GL_ARB_texture_buffer_object
 * Fixed a bug that caused a kernel crash if SLI Mosaic and G-SYNC were used
   at the same time on a configuration with more display devices connected
   to one GPU than another.
 * Added the ability to configure the swapping behavior for quad-buffered
   stereo visuals. The driver can be configured to independently swap each
   eye as it becomes ready, to wait for both eyes to complete rendering before
   swapping, or to allow applications to specify which of these two behaviors
   is preferred by setting the swap interval. This setting can be adjusted in
   the nvidia-settings control panel, or via the NV-CONTROL API.
 * Fixed a regression which caused the GPU fan status display to disappear from
   the nvidia-settings control panel.
 * Added reporting of ECC error counts to the nvidia-settings control panel.
 * Fixed a bug that sometimes prevented OpenGL sampler objects from being properly
   deallocated when destroying OpenGL contexts.
 * Fixed a bug that caused GLX_EXT_framebuffer_sRGB to incorrectly report sRGB
   support in 30 bit-per-pixel framebuffer configurations.
 * Added support for G-SYNC with sync-to-vblank disabled. This allows applications
   to use G-SYNC to eliminate tearing for frame rates below the monitor's maximum
   refresh rate but allow tearing above the maximum refresh rate in order to
   minimize latency.

When G-SYNC is active and sync-to-vblank is enabled, the frame rate is limited
    to the monitor's maximum refresh rate.

* GLSL gl_Fog.scale is now +infinity when gl_Fog.end equals gl_Fog.start.
   Previously, the value 0 was used, but this broke certain applications such
   as the game XIII running on Wine (Wine bug #37068).
 * Enabled G-SYNC by default when Unified Back Buffer (UBB) is disabled.
 * Updated the NVIDIA GPU driver to avoid using video memory already in use
   by vesafb.
 * Fixed a bug in nvidia-settings that caused the application to crash when
   saving the EDID to a file.
 * Fixed a bug that prevented the "mkprecompiled" utility included in the
   driver package from reading files correctly.
 * Fixed a bug that could cause an Xid error when terminating a video playback
   application using the overlay presentation queue in VDPAU.
 * Updated nvidia-installer to avoid recursing too deeply into kernel source
   trees under /usr/lib/modules, mirroring an existing restriction on recursion
   under /lib/modules.
 * Fixed a rare deadlock condition when running applications that use OpenGL in
   multiple threads on a Quadro GPU.
 * Fixed a kernel memory leak that occurred when looping hardware- accelerated
   video decoding with VDPAU on Maxwell-based GPUs.
 * Fixed a bug that caused the X server to crash if a RandR 1.4 output provided
   by a Sink Output provider was selected as the primary output on
   X.Org xserver 1.17 and higher.
 * Fixed a bug that caused waiting on X Sync Fence objects in OpenGL to hang
   indefinitely in some cases.
 * Fixed a bug that prevented OpenGL from properly recovering from hardware
   errors or sync object waits that had timed out.

-------------------------------------------------------------------
Thu Aug 06 23:21:56 CEST 2015 - bumblebee.obs@gmail.com

- Update to 352.09

* Added the ability to configure the swapping behavior for quad-buffered
   stereo visuals. The driver can be configured to independently swap each
   eye as it becomes ready, to wait for both eyes to complete rendering
   before swapping, or to allow applications to specify which of these two
   behaviors is preferred by setting the swap interval. This setting can be
   adjusted in the nvidia-settings control panel, or via the NV-CONTROL API.
 * Fixed a regression which caused the GPU fan status display to disappear
   from the nvidia-settings control panel.
 * Added reporting of ECC error counts to the nvidia-settings control panel.
 * Fixed a bug that sometimes prevented OpenGL sampler objects from being
   properly deallocated when destroying OpenGL contexts.
 * Fixed a bug that caused GLX_EXT_framebuffer_sRGB to incorrectly report
   sRGB support in 30 bit-per-pixel framebuffer configurations.
 * Added support for G-SYNC with sync-to-vblank disabled. This allows
   applications to use G-SYNC to eliminate tearing for frame rates below
   the monitor's maximum refresh rate but allow tearing above the maximum 
   refresh rate in order to minimize latency.

When G-SYNC is active and sync-to-vblank is enabled, the frame rate is
    limited to the monitor's maximum refresh rate.

-------------------------------------------------------------------
Thu Aug 06 22:50:01 CEST 2015 - bumblebee.obs@gmail.com

- Update to 349.16

* Added support for the following GPUs:
        Quadro K1200
        Quadro M6000
        GeForce 920M
        GeForce 930A
        GeForce 930M
        GeForce 940M
        GeForce GTX 950M
        GeForce GTX 960M
        GeForce GTX TITAN X
 * Added support for G-SYNC monitors when used together with
   non-G-SYNC monitors.  When G-SYNC is enabled, non-G-SYNC
   monitors will display with tearing.
 * Fixed a bug that caused nvidia-settings to crash when assigning
   an attribute whose value is a display ID on a system with
   multiple X screens.
 * Updated the reporting of in-use video memory in the nvidia-settings
   control panel to use the same accounting methods used in other tools
   such as nvidia-smi. nvidia-settings was not taking some allocations
   into account, e.g. framebuffer memory for the efifb console on UEFI
   systems, causing discrepancies in the values reported by different tools.
 * Removed the "EnableACPIHotkeys" X configuration option. This option
   has been deprecated and disabled by default since driver version 346.35.
   On modern Linux systems, display change hotkey events are delivered to
   the desktop environment as key press events, and the desktop environment
   handles the display change by issuing requests through the X Resize and
   Rotate extension (RandR).
 * Added support for lossless H.264/AVC video streams to VDPAU.
 * Added support for VDPAU Feature Set F to the NVIDIA VDPAU driver.
   GPUs with VDPAU Feature Set F are capable of hardware-accelerated
   decoding of H.265/HEVC video streams.
 * Fixed a bug that prevented GPU fan speed changes from getting reflected
   in the text box on Thermal settings page.
 * Added nvidia-settings commandline support to query the current and
   targeted GPU fan speed.
 * Added a checkbox to nvidia-settings to enable a visual indicator that
   shows when G-SYNC is being used.  This is helpful for displays that
   don't indicate themselves whether they are operating in G-SYNC mode or
   normal mode.

This setting can also be enabled by running the command line

nvidia-settings -a ShowGSYNCVisualIndicator=1
    
 * Added support for the X.Org X server's "-background none" option. When
   enabled, the NVIDIA driver will try to copy the framebuffer console's
   contents out of /dev/fb0.  If that cannot be done, then the screen is
   cleared to black.
 * Added support for YUV 4:2:0 compression to enable HDMI 2.0 4K@60Hz modes
   when either the display or GPU is incapable of driving these modes in
   RGB 4:4:4.  See NoEdidHDMI2Check in the README for details.
 * Fixed a bug that could cause multi-threaded applications to crash when
   multiple threads used the EGL driver at the same time.
 * Fixed a bug that caused Sync to VBlank to not work correctly with
   XVideo applications in certain configurations.
 * Fixed a bug that prevented the X driver from correctly interpreting
   some X configuration options when a display device name was given
   with a GPU UUID qualifier.
 * Fixed Pixel Buffer Object operations when row length is less than width.
   GL_[UN]PACK_ROW_LENGTH can be set to a value lower than the width of
   the operation being carried out. The OpenGL specification allows for 
   this (the source or destination lines will be overlapping). Previously,
   our implementation of Pixel Buffer Objects did not support this case and
   would throw an error.
 * Fixed a bug that caused corruption when switching display modes in some
   applications that use transform feedback.
 * Fixed a bug that caused texture corruption on framebuffer depth
   attachments cleared using glClearTexImage().
 * Fixed a bug that artificially limited the maximum pixel clock on
   displays in some SLI Mosaic configurations.
 * Fixed a kernel memory leak that occurred when looping hardware-accelerated
   video decoding with VDPAU on Maxwell-based GPUs.

-------------------------------------------------------------------
Sun Apr 12 20:01:00 CEST 2015 - bumblebee.obs@gmail.com

- Update to 349.12

* Added support for G-SYNC monitors when used together with
   non-G-SYNC monitors.When G-SYNC is enabled,
   non-G-SYNC monitors will display with tearing.
 * Fixed a bug that caused nvidia-settings to crash when assigning
   an attribute whose value is a display ID on a system with
   multiple X screens.
 * Updated the reporting of in-use video memory in
   the nvidia-settings control panel to use the same accounting
   methods used in other tools such as nvidia-smi. nvidia-settings
   was not taking some allocations into account, e.g. framebuffer
   memory for the efifb console on UEFI systems, causing discrepancies
   in the values reported by different tools.
 * Removed the "EnableACPIHotkeys" X configuration option. This
   option has been deprecated and disabled by default since driver
   version 346.35. On modern Linux systems, display change hotkey
   events are delivered to the desktop environment as key press events,
   and the desktop environment handles the display change by issuing
   requests through the X Resize and Rotate extension (RandR).
 * Added support for lossless H.264/AVC video streams to VDPAU.
 * Added support for VDPAU Feature Set F to the NVIDIA VDPAU driver.
   GPUs with VDPAU Feature Set F are capable of hardware-accelerated
   decoding of H.265/HEVC video streams.
 * Fixed a bug that prevented GPU fan speed changes from getting
   reflected in the text box on Thermal settings page.
 * Added nvidia-settings commandline support to query the current
   and targeted GPU fan speed.
 * Added a checkbox to nvidia-settings to enable a visual indicator
   that shows when G-SYNC is being used.This is helpful for displays
   that don't indicate themselves whether they are operating in G-SYNC
   mode or normal mode.

This setting can also be enabled by running the command line

nvidia-settings -a ShowGSYNCVisualIndicator=1

* Added support for the X.Org X server's "-background none" option.
   When enabled, the NVIDIA driver will try to copy the framebuffer
   console's contents out of /dev/fb0.If that cannot be done, then
   the screen is cleared to black.
 * Added support for YUV 4:2:0 compression to enable
   HDMI 2.0 4K@60Hz modes when either the display or GPU is incapable
   of driving these modes in RGB 4:4:4.See NoEdidHDMI2Check in the
   README for details.
 * Fixed a bug that could cause multi-threaded applications to crash
   when multiple threads used the EGL driver at the same time.
 * Fixed a bug that caused Sync to VBlank to not work correctly with
   XVideo applications in certain configurations.
 * Fixed a bug that prevented the X driver from correctly interpreting
   some X configuration options when a display device name was given
   with a GPU UUID qualifier.

-------------------------------------------------------------------
Sun Apr 12 19:44:14 CEST 2015 - bumblebee.obs@gmail.com

- Update to 346.47

* Added support for the following GPUs:
        Quadro M6000
        Quadro K1200
        GeForce GTX TITAN X
        Quadro K620M
        Quadro K2200M
        GeForce GTX 965M
 * Fixed a bug that could cause rendering corruption in GLX clients
   using PBOs and/or VBOs when using GLX indirect rendering.
 * Fixed a bug that caused Xinerama layouts which included X screens
   with 'Option "UseDisplayDevice" "none"' to be represented incorrectly
   in the nvidia-settings control panel.
 * Fixed a bug that could cause glXSwapBuffer() to block for longer than
   necessary in multi-threaded GLX applications using
   the GLX_NV_delay_before_swap extension.
 * Fixed a bug that caused OpenGL applications using
   the NV_path_rendering extension to crash after a modeswitch event.
 * Fixed a bug that caused DisplayPort audio to stop working after
   monitors are hotplugged.

-------------------------------------------------------------------
Tue Feb 10 20:21:05 CEST 2015 - bumblebee.obs@gmail.com

- Update to 346.35

* Added support for the following GPUs:
        GeForce GTX 960
        GeForce 800A
        GeForce 800M
        GeForce GTX 970M
        GeForce GTX 980M
 * Added support for X.Org xserver ABI 19 (xorg-server 1.17).
 * Improved compatibility with recent Linux kernels.
 * Fixed a bug that prevented internal 4K panels on some laptops
   from being driven at a sufficient bandwidth to support their
   native resolutions.
 * Fixed a regression that prevented the NVIDIA kernel module from
   loading in some virtualized environments such as Amazon Web Services.
 * Fixed a regression that caused displays to be detected incorrectly
   on some notebook systems.
 * Fixed a bug that could cause X to freeze when using Base Mosaic.
 * Fixed a regression that prevented the NVIDIA X driver from recognizing
   Base Mosaic layouts generated by the nvidia-settings control panel.
 * Updated the NVIDIA X driver to reject frame packed interlaced
   HDMI 3D modes during mode validation. These modes were being validated by
   the driver, despite never having been supported.
 * Fixed a bug that prevented the console from being restored after
   forcefully terminating X, on some GPUs with multiple DisplayPort
   monitors attached. This bug also subsequently prevented X from
   being started following the failed console restoration.
 * Updated the version of libvdpau shipped with the driver to 0.9.
   This version honors the VDPAU_DRIVER_PATH environment variable and
   fixes a race condition if multiple threads call VdpDeviceCreateX11
   simultaneously. See

http://lists.freedesktop.org/archives/vdpau/2014-December/000274.html
    
    for more information.

Please note that users are encouraged to use their distribution's
    libvdpau packages rather than relying on the one shipped with the
    NVIDIA graphics driver.
 * Fixed a bug that caused the ACPI hotkey mask to be set incorrectly
   on some laptops even when the EnableACPIHotkeys option is disabled.
 * Disabled the EnableACPIHotkeys option by default.  This option is
   now considered deprecated and will be removed in a future driver
   release. On modern Linux systems, display change hotkey events are
   delivered to the desktop environment as key press events, and the
   desktop environment handles the display change by issuing requests
   through the X Resize and Rotate extension (RandR).
 * Fixed a bug that caused the screen image to be shifted when screen
   transformations (such as rotations or reflections) were enabled on
   a G-SYNC display attached to a Kepler-based GPU.
 * Fixed a bug that caused a blank screen when setting a mode requiring
   YUV 4:2:0 compression. These modes are not currently supported.
 * Fixed a bug that caused an incorrect DisplayPort link configuration
   to be displayed after a hotplug or unplug.
 * Added support for decoding VP8 video streams using the NVCUVID API
   on GPUs with VP8 hardware decode support.
 * Added support for the following EGL extensions:
        EGL_EXT_device_base
        EGL_EXT_platform_device
        EGL_EXT_output_base
 * Added the ability to increase the operating voltage on certain
   GeForce GPUs in the GeForce GTX 400 series and later. Voltage
   adjustments are done at the user's own risk. See the documentation
   on the "CoolBits" X configuration option in the README for details.
 * Added support for NVENC on GeForce GPUs. For more details on the
   NVENC SDK, see: https://developer.nvidia.com/nvidia-video-codec-sdk.
 * Removed a sanity check in nvidia-installer that tested the
   availability of POSIX shared memory. The NVIDIA GPU driver has not
   required POSIX shared memory since release 270.xx.
 * Removed the NVIDIA Unified Memory kernel module, nvidia-uvm.ko,
   from the driver package on 32-bit architectures.
 * Added accelerated support for r8g8b8a8, r8g8b8x8, b8g8r8a8 and
   b8g8r8x8 RENDER formats.
 * Updated nvidia-settings to take advantage of GTK+ 3, when available.
   This is implemented by building the nvidia-settings user interface
   into separate shared libraries (libnvidia-gtk2.so, libnvidia-gtk3.so),
   and loading the correct one at run-time.
 * Added the nvidia-settings option --gtk-library to allow specifying 
   the path of the directory containing the user interface library or
   the path and filename of the specific library to use.
 * Added support in nvidia-settings for a GTK+ 3 user interface
   on x86 and x86_64.
 * Added the nvidia-settings option --use-gtk2 to force the use of
   the GTK+ 2 UI library.
 * Updated nvidia-installer to install a file in the system's
   xorg.conf.d directory, when a sufficiently new X server is detected,
   to cause the X server to load the "nvidia" X driver automatically
   if it is started after the NVIDIA kernel module is loaded.

This feature is supported in X.Org xserver 1.16 and higher when
    running on Linux 3.9 or higher with CONFIG_DRM enabled.
    Improved the performance of nvidia-installer by enabling the use
    of parallel make when building the NVIDIA kernel modules.
    The concurrency level can be set with the --concurrency-level
    option, and defaults to the number of detected CPUs.
    Updated nvidia-installer to determine default installation
    locations for libraries based on the presence of known paths
    in the ldconfig(8) cache and the filesystem, rather than
    hardcoded distro-specific paths.
 * Fixed a GLSL compiler bug that would produce corruption when
   running games such as Far Cry 3 in Wine.
 * Fixed the EGL_KHR_stream_cross_process_fd extension.
 * Fixed rendering corruption that sometimes happened when calling
   DrawElementsInstancedBaseVertexBaseInstance(),
   DrawElementsInstancedBaseInstance(), or
   DrawArraysInstancedBaseInstance().
 * Dramatically improved OpenGL Framebuffer Object creation
   performance.
 * Removed the limit on the maximum number of
   OpenGL Framebuffer Objects.
 * Updated the NVIDIA OpenGL driver to prefer $XDG_CACHE_HOME over
   $HOME as the default location for storing the GL shader disk cache.

-------------------------------------------------------------------
Tue Dec 23 11:02:38 CEST 2014 - bumblebee.obs@gmail.com

- Update to 346.22

* Added support for X.Org xserver ABI 19 (xorg-server 1.17).
  * Improved compatibility with recent Linux kernels.
  * Fixed a bug that prevented internal 4K panels on some laptops
    from being driven at a sufficient bandwidth to support their
    native resolutions.
  * Fixed a regression that prevented the NVIDIA kernel module
    from loading in some virtualized environments such as
    Amazon Web Services.
  * Fixed a regression that caused displays to be detected
    incorrectly on some notebook systems.
  * Fixed a bug that could cause X to freeze when using Base Mosaic.
  * Fixed a regression that prevented the NVIDIA X driver from
    recognizing Base Mosaic layouts generated by the nvidia-settings
    control panel.

-------------------------------------------------------------------
Tue Dec 23 10:50:09 CEST 2014 - bumblebee.obs@gmail.com

- Update to 346.16

* Added support for the following GPUs:
        GeForce GTX 970M
        GeForce GTX 980M
  * Fixed a bug that caused a blank screen when setting a mode
    requiring YUV 4:2:0 compression. These modes are not currently
    supported.
  * Fixed a bug that caused an incorrect DisplayPort link
    configuration to be displayed after a hotplug or unplug.
  * Added support for decoding VP8 video streams using the
    NVCUVID API on GPUs with VP8 hardware decode support.
  * Added support for the following EGL extensions:
        EGL_EXT_device_base
        EGL_EXT_platform_device
        EGL_EXT_output_base
  * Added the ability to increase the operating voltage on certain
    GeForce GPUs in the GeForce GTX 400 series and later. Voltage
    adjustments are done at the user's own risk. See the documentation on
    the "CoolBits" X configuration option in the README for details.
  * Added support for NVENC on GeForce GPUs. For more details on
    the NVENC SDK, see:
      https://developer.nvidia.com/nvidia-video-codec-sdk.
  * Removed a sanity check in nvidia-installer that tested the availability
    of POSIX shared memory. The NVIDIA GPU driver has not required POSIX
    shared memory since release 270.xx.
  * Added accelerated support for r8g8b8a8, r8g8b8x8, b8g8r8a8 and
    b8g8r8x8 RENDER formats.
  * Updated nvidia-settings to take advantage of GTK+ 3, when available.
    This is implemented by building the nvidia-settings user interface into
    separate shared libraries (libnvidia-gtk2.so, libnvidia-gtk3.so),
    and loading the correct one at run-time.
  * Added the nvidia-settings option --gtk-library to allow specifying
    the path of the directory containing the user interface library or
    the path and filename of the specific library to use.
  * Added support in nvidia-settings for a GTK+ 3 user interface on
    x86 and x86_64.
  * Added the nvidia-settings option --use-gtk2 to force the use of
    the GTK+ 2 UI library.
  * Updated nvidia-installer to install a file in the system's xorg.conf.d
    directory, when a sufficiently new X server is detected, to cause
    the X server to load the "nvidia" X driver automatically if it is
    started after the NVIDIA kernel module is loaded.
    This feature is supported in X.Org xserver 1.16 and higher when running
    on Linux 3.9 or higher with CONFIG_DRM enabled.
  * Improved the performance of nvidia-installer by enabling the use of
    parallel make when building the NVIDIA kernel modules. The concurrency level
    can be set with the --concurrency-level option, and defaults to
    the number of detected CPUs.
  * Updated nvidia-installer to determine default installation locations
    for libraries based on the presence of known paths in the ldconfig(8)
    cache and the filesystem, rather than hardcoded distro-specific paths.
  * Fixed a GLSL compiler bug that would produce corruption when running
    games such as Far Cry 3 in Wine.
  * Fixed the EGL_KHR_stream_cross_process_fd extension.
  * Fixed rendering corruption that sometimes happened when calling
        DrawElementsInstancedBaseVertexBaseInstance(),
        DrawElementsInstancedBaseInstance(),
        or DrawArraysInstancedBaseInstance().
  * Dramatically improved OpenGL Framebuffer Object creation performance.
  * Removed the limit on the maximum number of OpenGL Framebuffer Objects.
  * Updated the NVIDIA OpenGL driver to prefer $XDG_CACHE_HOME over $HOME as
    the default location for storing the GL shader disk cache.

-------------------------------------------------------------------
Tue Dec 23 10:11:17 CEST 2014 - bumblebee.obs@gmail.com

- Update to 340.65

* Added support for X.Org xserver ABI 19 (xorg-server 1.17).
  * Improved compatibility with recent Linux kernels.
  * Fixed a bug that prevented internal 4K panels on some laptops
    from being driven at a sufficient bandwidth to support their
    native resolutions.
  * Fixed a regression that prevented the NVIDIA kernel module from
    loading in some virtualized environments such as Amazon Web Services.
  * Fixed a regression that caused displays to be detected incorrectly
    on some notebook systems.
  * Fixed a bug that could cause X to freeze when using Base Mosaic.
  * Fixed a regression that prevented the NVIDIA X driver from recognizing
    Base Mosaic layouts generated by the nvidia-settings control panel.

-------------------------------------------------------------------
Tue Dec 23 10:03:46 CEST 2014 - bumblebee.obs@gmail.com

- Update to 340.58

* Added support for the following GPUs:
        GeForce GT820M
        GeForce GTX 760A
        GeForce GTX 850A
        GeForce 810A
        GeForce 820A
        GeForce 840A
  * Fixed a bug that could cause VT-switching to fail following a
    suspend, resume, and driver reload sequence.
  * Fixed a bug that caused incorrect colors to be displayed on
    X screens running at depth 8 on some GPUs.
  * Fixed a bug that prevented GPUs from being correctly recognized
    in MetaMode strings when identified by UUID.
  * Implemented support for disabling indirect GLX context creation using
    the -iglx option available on X.Org server release 1.16 and newer.
    	Note that future X.Org server releases may make the -iglx option the default.
        To re-enable support for indirect GLX on such servers, use the +iglx option.
  * Added the "AllowIndirectGLXProtocol" X config option. This option can
    be used to disallow use of GLX protocol. See "Appendix B. X Config Options"
    in the README for more details.

-------------------------------------------------------------------
Mon Oct 20 21:43:25 CEST 2014 - bumblebee.obs@gmail.com

- Update to 340.46

* Fixed an OpenGL issue that could cause glReadPixels() operations to be
    improperly clipped when resizing composited application windows,
    potentially leading to momentary X freezes.
  * Fixed a bug that could prevent the GLSL compiler from correctly
    evaluating some expressions when compiling shaders.
  * Fixed a bug that could cause nvidia-installer to crash while attempting to
    run nvidia-xconfig on systems where that utility is missing.
  * Added option UseSysmemPixmapAccel to control the use of GPU acceleration
    for X drawing operations on pixmaps allocated in system memory.

-------------------------------------------------------------------
Mon Sep  1 09:36:29 CEST 2014 - bumblebee.obs@gmail.com

- Update to 340.32

* Added support for the following GPUs:
        Quadro K420
        Quadro K620
        Quadro K2200
        Quadro K4200
        Quadro K5200
  * Fixed a regression that prevented the internal stereo infrared
  	emitter built into some 3D Vision monitors from working.
  * Fixed a bug that could cause some Java-based OpenGL applications
  	using JOGL to crash on startup on systems with Xinerama enabled.
  * Fixed a bug that could prevent OpenGL Framebuffer Objects (FBOs) from
  	being properly redrawn after a modeswitch.
  * Fixed a memory leak that occurred when starting OpenGL applications.
  * Fixed a bug that prevented the EDID-Like Data (ELD) of audio-capable
  	displays from being updated when hotplugged/unplugged.
  * Fixed a bug that caused Xid errors when using stereo mode 12 (HDMI 3D)
  	on Quadro boards without an onboard stereo DIN connector.
  * Fixed a video corruption issue for VDPAU decoding of VC-1 and WMV video
  	streams utilizing range remapping on Maxwell GPUs.
  * Fixed a "black window" bug in Ubuntu 14.04 when using the Xinerama and
  	Composite extensions.
  * Fixed a bug that caused the screen's contents to be shifted downward
  	when a G-SYNC monitor is unplugged and replaced by a non-G-SYNC monitor.
  * Fixed a bug that prevented G-SYNC from working when a G-SYNC monitor
	was unplugged and plugged back in without a modeset.

-------------------------------------------------------------------
Fri Aug  8 22:02:17 CEST 2014 - bumblebee.obs@gmail.com

- Update to 340.24

* Fixed a bug that prevented 3D Vision stereo and ultra low motion
  	blur modes from working on G-SYNC capable monitors in some cases.
  * Fixed a bug that caused the "Allow G-SYNC" checkbox to be displayed
  	in nvidia-settings even if the GPUs in the system are not
    capable of G-SYNC.
  * Fixed a kernel crash when running some applications with
  	IOMMU functionality enabled.
  * Fixed a floating point exception in the OpenGL driver when
  	running "Risk of Rain" under Wine.
  * Made various improvements and corrections to the information reported
  	to GL applications via the KHR_debug and ARB_debug_output extensions.
  * Fixed a bug that caused GLX applications which simultaneously create
  	drawables on multiple X servers to crash when swapping buffers.
  * Updated nvidia-settings to report all valid names for each target when
  	querying target types, e.g. `nvidia-settings -q gpus`.
  * Added support for controlling the availability of
  	Fast Approximate Antialiasing (FXAA) on a per-application basis via the
    new __GL_ALLOW_FXAA_USAGE environment variable and the corresponding
    GLAllowFXAAUsage application profile key. See the README for details.
  * Fixed a bug where indirect rendering could become corrupted on system
  	configurations that disallow writing to executable memory.
  * Updated the nvidia-settings Makefiles to allow nvidia-settings to be
  	dynamically linked against the host system's libjansson. This option
    can be enabled by setting the NV_USE_BUNDLED_LIBJANSSON Makefile variable
    to 0.Please note that nvidia-settings requires libjansson version 2.2 or later.
  * Removed the runlevel check from nvidia-installer: the installation
  	problems formerly associated with runlevel 1 no longer apply.
  * Added initial support for G-SYNC monitors.Additional details and system
  	requirements can be found at:

http://www.geforce.com/hardware/technology/g-sync
  * Improved support for running the NVIDIA driver in configurations where
  	writing to executable memory is disallowed.Driver optimizations that require
    writing to executable memory can be forcefully disabled using the new
    GL_WRITE_TEXT_SECTION environment variable.See the README for more details.
  * Fixed an X driver bug that caused gamma ramp updates of the green channel
  	at depth 15, on some recent GPUs, to be ignored.
  * Fixed a regression, introduced in the 340.17 public beta release, that
  	caused the NVIDIA X driver to access freed memory when exiting a
    GLX application that used either of the GLX_NV_video_out or
    GLX_NV_present_video extensions.

-------------------------------------------------------------------
Fri Jun 13 15:17:33 CEST 2014 - bumblebee.obs@gmail.com

- Update to 340.17

* Made various improvements and corrections to the information
    reported to GL applications via the KHR_debug and
    ARB_debug_output extensions.
  * Fixed a bug that caused GLX applications which simultaneously
    create drawables on multiple X servers to crash when swapping buffers.
  * Updated nvidia-settings to report all valid names for each target
    when querying target types, e.g. `nvidia-settings -q gpus`.
  * Added support for controlling the availability of
    Fast Approximate Antialiasing (FXAA) on a per-application basis via
    the new __GL_ALLOW_FXAA_USAGE environment variable and
    the corresponding GLAllowFXAAUsage application profile key.
    See the README for details.
  * Fixed a bug where indirect rendering could become corrupted on system
    configurations that disallow writing to executable memory.
  * Updated the nvidia-settings Makefiles to allow nvidia-settings to be
    dynamically linked against the host system's libjansson. This option
    can be enabled by setting the NV_USE_BUNDLED_LIBJANSSON Makefile
    variable to 0.  Please note that nvidia-settings requires libjansson
    version 2.2 or later.
  * Removed the runlevel check from nvidia-installer: the installation
    problems formerly associated with runlevel 1 no longer apply.
  * Added initial support for G-SYNC monitors. Additional details and
    system requirements can be found at:

-------------------------------------------------------------------
Fri Jun 13 14:21:08 CEST 2014 - bumblebee.obs@gmail.com

- Update to 337.25

* Added support for the following GPUs:
        GeForce GTX TITAN Z
        GeForce GT 740
        GeForce 830M
        GeForce 840M
        GeForce 845M
        GeForce GTX 850M
  * Fixed a bug that caused X to crash when querying clock
    offsets for non-existent performance levels.
  * Fixed a performance regression when running KDE with desktop
    effects using the OpenGL compositing backend.
  * Fixed a bug that caused duplicate entries to appear in some
    dropdown menus in the "Application Profiles" page of nvidia-settings.
  * Fixed a regression that could cause OpenGL rendering corruption
    on X screens with 30 bit per pixel color.
  * Fixed a bug causing mode validation to fail for 4K resolutions over
    HDMI in certain situations.
  * Added nvidia-settings command line controls for over- and
    under-clocking attributes.  Please see the nvidia-settings(1) manual
    page for more details.
  * Fixed several cosmetic issues in the clock control user interface of
    nvidia-settings.
  * Added support for the GLX_EXT_stereo_tree extension.  For more details,
    see the extension specification:
        http://www.opengl.org/registry/specs/EXT/glx_stereo_tree.txt
  * Enabled support for using Unified Back Buffer (UBB) and 3D Stereo with
    the composite extension on Quadro cards.  Using stereo with a composite
    manager requires a stereo-aware composite manager.  Otherwise, only
    the left eye of stereo applications will be displayed.  See
    the GLX_EXT_stereo_tree extension specification for more details.
  * Fixed a bug that could cause OpenGL programs to freeze under some low
    memory conditions.
  * Updated the display configuration page in nvidia-settings to uniquely
    identify DisplayPort 1.2 monitors by displaying the monitor GUIDs.
  * Fixed a bug that could cause ECC settings to be displayed incorrectly
    in nvidia-settings when changing ECC settings on a multi-GPU system.
  * Removed the "OnDemandVBlankInterrupts" X configuration option: this
    option has been enabled by default since version 177.68 of
    the NVIDIA Unix driver, and the documentation had not been updated to
    reflect the new default value.
  * Fixed a bug that caused GPU errors when hotplugging daisy-chained
    DisplayPort 1.2 displays.
  * Updated the color correction settings page in the nvidia-settings
    control panel to reflect gamma changes made by other RandR clients
    while the control panel was already running.
  * Fixed a bug that prevented the use of multiple simultaneous
    X servers on UEFI systems.
  * Updated the nvidia-settings source package to build libXNVCtrl when
    building nvidia-settings, instead of relying on a pre-built library.
  * Added the ability to over- and under-clock certain GeForce GPUs in
    the GeForce GTX 400 series and later.  For GPUs that allow it, an
    offset can be applied to clock values in some clock domains of
    some performance levels.  This clock manipulation is done at the
    user's own risk.  See the README documentation of
    the "CoolBits" X configuration option for more details.
  * Updated the minimum required version of GTK+ from 2.2 to 2.4 for
    nvidia-settings.
  * Renamed the RandR output property _GUID to GUID now that it is
    an official property documented in randrproto.txt:
        http://cgit.freedesktop.org/xorg/proto/randrproto
          /commit/?id=19fc4c5a72eb9919d720ad66734029d9f8e313b1
  * Reduced CPU utilization and GPU memory utilization of
    the NVIDIA EGL driver.
  * Added support for the following EGL extensions:
        - EGL_EXT_buffer_age;
        - EGL_EXT_client_extensions;
        - EGL_EXT_platform_base;
        - EGL_EXT_platform_x11.
  * Renamed the "Clone" setting of the "MetaModeOrientation"
    X configuration option to "SamePositionAs", to make clear that
    this setting applies to the position only, and not to the resolution
    of modes in the MetaMode.
  * Added NV-CONTROL attribute NV_CTRL_VIDEO_ENCODER_UTILIZATION to
    query utilization percentage of the video encoder engine.
  * Added support for the GLX_NV_delay_before_swap extension.  For more
    details, see the extension specification:
        http://www.opengl.org/registry/specs/NV/glx_delay_before_swap.txt
  * Report correct buffer sizes for RGB GLX visuals, GLXFBConfigs,
    and EGLConfigs.  Previously, RGB10 and RGB8 formats were reported as
    having 32 bits, and RGB5 formats were reported as having 16 bits.
    Now they are correctly reported as 30, 24, and 15 bit formats
    respectively as required by the GLX and EGL specifications.

-------------------------------------------------------------------
Sun May 11 13:26:43 CEST 2014 - bumblebee.obs@gmail.com

- Update to 337.19

* Fixed a bug causing mode validation to fail for 4K resolutions
  	over HDMI in certain situations.
  * Added nvidia-settings command line controls for over- and
  	under-clocking attributes. Please see the nvidia-settings(1) manual
    page for more details.
  * Fixed several cosmetic issues in the clock control user interface
  	of nvidia-settings.
  * Added support for the GLX_EXT_stereo_tree extension. For more details,
  	see the extension specification:

http://www.opengl.org/registry/specs/EXT/glx_stereo_tree.txt

* Enabled support for using Unified Back Buffer (UBB) and 3D Stereo
  	with the composite extension on Quadro cards. Using stereo with
    a composite manager requires a stereo-aware composite manager.
    Otherwise, only the left eye of stereo applications will be displayed.
    See the GLX_EXT_stereo_tree extension specification for more details.
  * Fixed a bug that caused blank screens and flickering when rotating
  	displays in a Base Mosaic layout.
  * Fixed a bug that caused BadRRCrtc or BadRROutput errors for
  	big-endian X11 clients making certain XRandR requests.
  * Fixed a bug that corrupted certain software rendering, notably
  	the stippled text used to represent disabled entries in
    xterm's pop-up menus.
  * Fixed a bug that caused corruption or blank screens on monitors that
  	use EDID version 1.3 or older when they are connected via
    DisplayPort on graphics boards that use external DisplayPort encoders,
    such as the Quadro FX 4800.

-------------------------------------------------------------------
Thu Apr 10 11:57:01 CEST 2014 - bumblebee.obs@gmail.com

- Update to 337.12

* Added support for the following GPUs:
        GeForce 830M
        GeForce 840M
        GeForce 845M
        GeForce GTX 850M
        GeForce GTX 860M
        GeForce GTX 870M
        GeForce GTX 880M
        GeForce GT 705
        GeForce GT 720
  * Fixed a bug that could cause OpenGL programs to freeze under some low
    memory conditions.
  * Updated the display configuration page in nvidia-settings to uniquely
    identify DisplayPort 1.2 monitors by displaying the monitor GUIDs.
  * Fixed a bug that could cause ECC settings to be displayed incorrectly
    in nvidia-settings when changing ECC settings on a multi-GPU system.
  * Removed the "OnDemandVBlankInterrupts" X configuration option: this
    option has been enabled by default since version 177.68 of the NVIDIA
    Unix driver, and the documentation had not been updated to reflect
    the new default value.
  * Fixed a bug that caused GPU errors when hotplugging daisy-chained
    DisplayPort 1.2 displays.
  * Updated the color correction settings page in the nvidia-settings
    control panel to reflect gamma changes made by other RandR clients
    while the control panel was already running.
  * Fixed a bug that prevented the use of multiple simultaneous X servers
    on UEFI systems.
  * Updated the nvidia-settings source package to build libXNVCtrl when
    building nvidia-settings, instead of relying on a pre-built library.
  * Added the ability to over- and under-clock certain GeForce GPUs in
    the GeForce GTX 400 series and later.  For GPUs that allow it, an
    offset can be applied to clock values in some clock domains of some
    performance levels.  This clock manipulation is done at the user's
    own risk.  See the README documentation of the "CoolBits"
    X configuration option for more details.
  * Updated the minimum required version of GTK+ from 2.2 to 2.4 for
    nvidia-settings.
  * Renamed the RandR output property _GUID to GUID now that it is an
    official property documented in randrproto.txt:

http://cgit.freedesktop.org/xorg/proto/randrproto/
      commit/?id=19fc4c5a72eb9919d720ad66734029d9f8e313b1

* Reduced CPU utilization and GPU memory utilization of the
    NVIDIA EGL driver.
  * Added support for the following EGL extensions:
        - EGL_EXT_buffer_age;
        - EGL_EXT_client_extensions;
        - EGL_EXT_platform_base;
        - EGL_EXT_platform_x11.
  * Renamed the "Clone" setting of the "MetaModeOrientation"
    X configuration option to "SamePositionAs", to make clear that this
    setting applies to the position only, and not to the resolution of
    modes in the MetaMode.
  * Added NV-CONTROL attribute NV_CTRL_VIDEO_ENCODER_UTILIZATION to query
    utilization percentage of the video encoder engine.
  * Added support for the GLX_NV_delay_before_swap extension.  For more
    details, see the extension specification:

http://www.opengl.org/registry/specs/NV/glx_delay_before_swap.txt

* Report correct buffer sizes for RGB GLX visuals, GLXFBConfigs, and
    EGLConfigs.  Previously, RGB10 and RGB8 formats were reported as
    having 32 bits, and RGB5 formats were reported as having 16 bits.
    Now they are correctly reported as 30, 24, and 15 bit formats
    respectively as required by the GLX and EGL specifications.

-------------------------------------------------------------------
Thu Mar 23 13:14:47 CEST 2014 - bumblebee.obs@gmail.com

- Update to 334.21

* Added support for the following GPUs:

GeForce GTX 750 Ti
    GeForce GTX 750
    GeForce GTX 745
    GeForce GTX TITAN Black
    GeForce GT 710
    GeForce 825M

* Fixed a regression in the NVIDIA kernel module which caused it to
    improperly dereference a userspace pointer. This potential security
    issue was initially reported to the public at:

http://forums.grsecurity.net/viewtopic.php?f=3&t=3922

* The regression did not affect NVIDIA GPU drivers before release 334.
  * Fixed a bug that could cause OpenGL programs to hang after calling fork(2).
  * Fixed a bug that could cause a multi-threaded OpenGL application to
    crash when one of its threads exits after the application has unloaded libGL.
  * Added support for GPUs with VDPAU Feature Set E. See the README for details.
  * On GPUs with VDPAU Feature Set E, VDPAU now supports more robust decode
    error handling at the cost of a minor performance impact. This can be
    disabled by setting the VDPAU_NVIDIA_DISABLE_ERROR_CONCEALMENT environment
    variable to 1.
  * Added support for application profile rule patterns which are logical
    operations of subpatterns. See the README for details.
  * Added support for a "findfile" application profile feature which allows
    the driver to apply profiles based on matching files in the same directory
    as the process executable. See the README for details.
  * Fixed a bug that caused nvidia-installer to log the automatically selected
    answers to some user prompts without logging the prompt text itself,
    when running in silent mode.
  * Improved performance of OpenGL applications when used in conjunction with
    the X driver's composition pipeline. The composition pipeline may be
    explicitly enabled by using the ForceCompositionPipeline or
    ForceFullCompositionPipeline MetaMode options, or implicitly enabled when
    certain features such as some XRandR transformations, rotation,
    Warp & Blend, PRIME, and NvFBC are used.
  * Fixed a bug that could cause nvidia-settings to crash or display
    incorrect information after switching virtual terminals while a color
    correction confirmation countdown was active.
  * Improved compatibility with recent Linux kernels.

-------------------------------------------------------------------
Sun Feb 23 16:15:32 CEST 2014 - bumblebee.obs@gmail.com

- Update to 334.16

* Fixed a bug that could cause nvidia-settings to compute incorrect gamma ramps
    when adjusting the color correction sliders.
  * Updated the nvidia-settings control panel to allow the selection of display
    devices using RandR and target ID names when making queries targeted towards
    specific display devices.
  * Fixed a bug that prevented some dropdown menus in the nvidia-settings control
    panel from working correctly on older versions of GTK+ (e.g. 2.10.x).
  * Updated the nvidia-settings control panel to provide help text for application
    profile keys and suggestions for valid key names when configuring application
    profiles.
  * Updated the nvidia-settings control panel to populate the dropdown menu of
    stereo modes with only those modes which are available.
  * Fixed a bug that could cause applications using the OpenGL extension
    ARB_query_buffer_object to crash under Xinerama.
  * Fixed a bug that caused high pixelclock HDMI modes (e.g. as used with
    4K resolutions) to be erroneously reported as dual-link in the
    nvidia-settings control panel.
  * Fixed a bug that could cause poor stereo synchronization in large multi-monitor
    setups using 3D Vision, due to failed hardware handshaking on some of the monitors.
  * Fixed a bug that prevented some DisplayPort 1.2 displays from being properly
    restored after a VT switch.
  * Renamed per GPU proc directories in /proc/driver/nvidia/gpus/ with GPU's bus
    location represented in "domain:bus:device.function" format.
  * Added 64-bit EGL and OpenGL ES libraries to 64-bit driver prackages.
  * Changed format of "Bus Location" field reported in the
    /proc/driver/nvidia/gpus/0..N/information files from "domain:bus.device.function"
    to "domain:bus:device.function" to match the lspci format.
  * Fixed a bug in the GLX_EXT_buffer_age extension where incorrect ages would be
    returned unless triple buffering was enabled.
  * Updated the NVIDIA X driver to load the NVIDIA kernel module using
    `nvidia-modprobe`, rather than the XFree86 DDX helper function
    xf86LoadKernelModule().
  * Changed the driver's default behavior to stop deleting RandR 1.2 outputs
    corresponding to unused DisplayPort 1.2 devices.  Deleting these outputs can
    confuse some applications.  Added a new option, DeleteUnusedDP12Displays, which
    can be used to turn this behavior back on.

This option can be enabled by running

sudo nvidia-xconfig --delete-unused-dp12-displays
  * Improved support for the __GL_SYNC_DISPLAY_DEVICE and
    VDPAU_NVIDIA_SYNC_DISPLAY_DEVICE environment variables in certain configurations.
    Both environment variables will now recognize all supported display device names.
    See "Appendix C. Display Device Names" and "Appendix G. VDPAU Support" in the
    README for more details.
  * Improved performance of the X driver when handling large numbers of
    surface allocations.
  * Fixed a bug that caused PBO downloads of cube map faces to retrieve
    incorrect data.
  * Fixed a bug in nvidia-installer that resulted in spurious error messages when
    opting out of installing the NVIDIA kernel module or source files for the
    kernel module.
  * Added experimental support for ARGB GLX visuals when Xinerama and Composite are
    enabled at the same time on X.Org xserver 1.15.

-------------------------------------------------------------------
Sun Feb 23 15:56:40 CEST 2014 - bumblebee.obs@gmail.com

- Update to 331.49

* Added support for the following GPUs:

GeForce GT 710
        GeForce 825M

* Fixed a regression that prevented nvidia-installer from cleaning up directories
    created as part of the driver installation.
  * Added a new X configuration option "InbandStereoSignaling" to enable/disable
    DisplayPort in-band stereo signaling. See "Appendix B. X Config Options" in the
    README for more information.
  * Fixed a bug that caused PBO downloads of cube map faces to retrieve
    incorrect data.
  * Fixed a bug in nvidia-installer that resulted in spurious error messages when
    opting out of installing the NVIDIA kernel module or source files for the
    kernel module.
  * Added experimental support for ARGB GLX visuals when Xinerama and Composite are
    enabled at the same time on X.Org xserver 1.15.
  * Fixed a bug which could sometimes corrupt a newly-created thread's signal mask in
    multi-threaded applications that load libGL.
  * Fixed a bug that prevented the NVIDIA implementation of the Xinerama extension
    protocol requests from being used when RandR was enabled.

-------------------------------------------------------------------
Tue Jan 14 17:22:08 CEST 2014 - bumblebee.obs@gmail.com

- Update to 331.38

* Fixed a bug that caused the X server to crash if video memory is exhausted
    and the GPU does not support rendering to system memory.
  * Updated nvidia-installer to make the --multiple-kernel-modules option imply
    the --no-unified-memory option: Unified memory is incompatible with multiple
    kernel modules.
  * Updated the behavior of the nvidia-settings PowerMizer Preferred Mode
    drop-down menu, to make the setting apply consistently across all GPUs
    in an SLI group.
  * Improved the robustness of the NVIDIA X driver in scenarios where
    GPU-accessible memory for allocating pixmaps was exhausted.
  * Added NV-CONTROL attributes to control the brightness of the illuminated
    logos on certain graphics boards.For example, to turn off the illumination
    of the "GEFORCE GTX" lettering on the GeForce GTX 780, use
    nvidia-settings --assign GPULogoBrightness=0
  * Fixed a bug that prevented screen transformations from being applied
    properly when starting X.
  * GLX protocol for the following OpenGL extensions from OpenGL 2.1 and
    OpenGL 3.0 have been promoted from unofficial to ARB approved official status:
        GL_ARB_pixel_buffer_object
        GL_NV_conditional_render
        GL_ARB_map_buffer_range
        GL_EXT_texture_integer
        GL_ARB_vertex_array_object
    GL_ARB_pixel_buffer_object was the last piece of protocol needed to have
    official support for indirect rendering with all OpenGL 2.1 commands.

* GLX Protocol for the miscellaneous OpenGL 3.0 commands not associated with
    specific extensions has also been promoted from unofficial to ARB approved status.
    Deprecated display mask related configuration of display devices via NV-CONTROL
    and nvidia-settings.Display target specifications should be used instead - A display
    target is one of the display's valid names, with an optional GPU or X screen qualifier.
    Deprecated the following NV-CONTROL attributes:
        NV_CTRL_CONNECTED_DISPLAYS
        NV_CTRL_ENABLED_DISPLAYS
        NV_CTRL_ASSOCIATED_DISPLAYS
        NV_CTRL_NOTEBOOK_INTERNAL_LCD
        NV_CTRL_FRAMELOCK_MASTER
        NV_CTRL_FRAMELOCK_SLAVES
        NV_CTRL_FRAMELOCK_MASTERABLE
        NV_CTRL_FRAMELOCK_SLAVEABLE
    Also, although NV_CTRL_PROBE_DISPLAYS is still operational, the return value has
    been deprecated and should not be used.

* Added deprecation warning messages in nvidia-settings when deprecated attributes
    are used.This also includes display mask usage.
    
-------------------------------------------------------------------
Mon Nov 11 11:11:11 CEST 2013 - bumblebee.obs@gmail.com

- Update to 331.20

* Added support for NVIDIA OpenGL-based Framebuffer Capture (NvFBCOpenGL).
    This library provides a high performance, low latency interface to capture
    and optionally encode the composited framebuffer of an X screen.
    NvFBC and NvIFR are private APIs that are only available to approved partners
    for use in remote graphics scenarios.  Please contact NVIDIA at
    GRIDteam@nvidia.com for more information.
  * Fixed a bug that prevented configuration files containing application profiles
    from being loaded when directories were present in the application profile
    configuration search path.
  * Deferred initialization of libselinux in the NVIDIA OpenGL driver, in order to
    avoid a problem where libselinux might not be ready when the NVIDIA
    libGL shared library is first loaded.
  * Fixed a bug that could lead to memory exhaustion in OpenGL applications
    running on 32-bit systems.
  * Added nvidia-uvm.ko, the NVIDIA Unified Memory kernel module, to the NVIDIA
    Linux driver package. This kernel module provides support for the new
    Unified Memory feature in an upcoming CUDA release.
  * Fixed a bug that caused the X server to fail to initialize when DisplayPort 1.2
    monitors were assigned to separate X screens on the same GPU.
  * Fixed a bug that could cause a deadlock when forking from OpenGL programs
    which use some malloc implementations, such as TCMalloc.
  * Fixed a bug that prevented Warp & Blend settings from being retained across
    display configuration changes.
  * Fixed a bug that prevented some settings changes made via the nvidia-settings
    command line interface from being reflected in the nvidia-settings
    graphical user interface.
  * Changed the clipping behavior of the NVIDIA X driver on Trapezoids and
    Triangles for some RENDER operations to match the behavior in newer
    versions of Pixman:
  * http://lists.freedesktop.org/archives/pixman/2013-April/002755.html
  * Fixed a bug in MetaMode tracking that could cause spurious error messages
    to be printed when attempting to add or delete Metamodes via NV-CONTROL.
  * Fixed a bug that caused the NVIDIA X driver to attempt to load the
    X11 "shadow" module unconditionally, even in situations where the driver
    had no need to use the module. This could result in the printing of
    spurious error messages, on X servers where the module was not present.
  * Fixed a bug that prevented display configuration changes made with
    xvidtune(1) from working correctly.
  * Fixed a bug that occasionally caused display corruption in GLX applications
    while changing the display configuration.
  * Fixed a bug that prevented glReadPixels from working correctly when reading
    from Pixel Buffer Objects over indirect rendering, when the image width is
    not a multiple of 4.
  * Added a new NV-CONTROL attribute, NV_CTRL_BACKLIGHT_BRIGHTNESS, for
    controlling backlight brightness.
  * Fixed a bug that prevented nvidia-settings from creating display device
    configuration pages for newly connected DisplayPort 1.2 Multi Stream
    Transport downstream devices.
  * Added GPU utilization reporting to the nvidia-settings control panel.
  * Fixed a bug in the nvidia-settings control panel that prevented users from
    configuring stereo, when stereo was not already configured.
  * Added support for reporting the tachometer-measured fan speed on capable
    graphics boards via nvidia-settings and the NV-CONTROL API. The preexisting
    mechanism for reporting fan speed reports the speed of the fan as
    programmed by the driver.
  * For example, `nvidia-settings --query=[fan:0]/GPUCurrentFanSpeedRPM`.
  * Fixed a regression that caused GPUs that do not support graphics to not
    appear in nvidia-settings.
  * Fixed a bug that caused DisplayPort 1.2 multi-stream devices to stop working
    if they were unplugged and plugged back in while they were active in the
    current MetaMode.
  * Added support for multiple NVIDIA kernel modules. This feature allows users
    to assign different GPUs in the system to different NVIDIA kernel modules,
    potentially reducing the software overhead of coordinating access to multiple GPUs.
  * Added support for the EGL API on 32-bit platforms.  Currently, the
    supported client APIs are OpenGL ES 1.1, 2.0 and 3.0, and the only
    supported window system backend is X11.
  * Add a new option, AllowEmptyInitialConfiguration, which allows the X server
    to start even if no connected display devices are detected at startup.
    This option can be enabled by running
    "sudo nvidia-xconfig --allow-empty-initial-configuration"
  * This option is useful in RandR 1.4 display offload configurations where
    no display devices are connected to the NVIDIA GPU when the X server is
    started, but might be connected later.
  * Updated nvidia-installer to provide a scrollable text area for
    displaying messages from the /usr/lib/nvidia/alternate-install-present and
    /usr/lib/nvidia/alternate-install-available distro hook files. This allows
    for longer messages to be provided in these files.
  * Updated nvidia-installer to avoid recursing into the per-kernel "build" and
    "source" directories when searching for conflicting kernel modules
    in /lib/modules.
  * Added a system memory cache to improve the performance of certain
    X rendering operations that use software rendering fallbacks.  The
    X configuration option "SoftwareRenderCacheSize" may be used to configure
    the size of the cache.
  * Removed the "DynamicTwinView" X configuration option: dynamic
    reconfiguration of displays is always possible, and can no longer
    be disabled.
  * Fixed a bug that caused nvidia-settings to display incorrect information
    in its display configuration page when all displays on
    an X screen were turned off.
  * Updated nvidia-installer to only install the libraries libvdpau and
    libvdpau_trace if an existing installation of libvdpau is not detected
    on the system. This behavior can be overridden with
    the --install-vdpau-wrapper and --no-install-vdpau-wrapper options.
  * Future NVIDIA Linux installer packages will no longer include copies of
    libvdpau or libvdpau_trace: VDPAU users are recommended to install these
    libraries via other means, e.g. from packages provided by their
    distributors, or by building them from the sources available
    at: http://people.freedesktop.org/~aplattner/vdpau/

-------------------------------------------------------------------
Wed Oct 23 10:20:07 CEST 2013 - bumblebee.obs@gmail.com

- Update to 331.17

* Fixed a bug that prevented configuration files containing application
    profiles from being loaded when directories were present in the
    application profile configuration search path.
  * Deferred initialization of libselinux in the NVIDIA OpenGL driver,
    in order to avoid a problem where libselinux might not be ready
    when the NVIDIA libGL shared library is first loaded.
  * Fixed a bug that could lead to memory exhaustion in OpenGL
    applications running on 32-bit systems.
  * Added nvidia-uvm.ko, the NVIDIA Unified Memory kernel module,
    to the NVIDIA Linux driver package. This kernel module provides
    support for the new Unified Memory feature in an upcoming CUDA release.

-------------------------------------------------------------------
Fri Oct  4 22:32:26 CEST 2013 - bumblebee.obs@gmail.com

- Update to 331.13

* Fixed a bug that caused the X server to fail to initialize when
    DisplayPort 1.2 monitors were assigned to separate X screens on
    the same GPU.
  * Fixed a bug that could cause a deadlock when forking from OpenGL programs
    which use some malloc implementations, such as TCMalloc.
  * Fixed a bug that prevented Warp & Blend settings from being retained
    across display configuration changes.
  * Fixed a bug that prevented some settings changes made via the
    nvidia-settings command line interface from being reflected in the
    nvidia-settings graphical user interface.
  * Changed the clipping behavior of the NVIDIA X driver on Trapezoids and
    Triangles for some RENDER operations to match the behavior in newer
    versions of Pixman:

http://lists.freedesktop.org/archives/pixman/2013-April/002755.html

* Fixed a bug in MetaMode tracking that could cause spurious error messages
    to be printed when attempting to add or delete Metamodes via NV-CONTROL.
  * Fixed a bug that caused the NVIDIA X driver to attempt to load the
    X11 "shadow" module unconditionally, even in situations where the driver
    had no need to use the module. This could result in the printing of
    spurious error messages, on X servers where the module was not present.
  * Fixed a bug that prevented display configuration changes made with
    xvidtune(1) from working correctly.
  * Fixed a bug that occasionally caused display corruption in GLX applications
    while changing the display configuration.
  * Fixed a bug that prevented glReadPixels from working correctly when
    reading from Pixel Buffer Objects over indirect rendering,
    when the image width is not a multiple of 4.
  * Added a new NV-CONTROL attribute, NV_CTRL_BACKLIGHT_BRIGHTNESS,
    for controlling backlight brightness.
  * Fixed a bug that prevented nvidia-settings from creating display device
    configuration pages for newly connected DisplayPort 1.2 Multi Stream
    Transport downstream devices.
  * Added GPU utilization reporting to the nvidia-settings control panel.
  * Fixed a bug in the nvidia-settings control panel that prevented users
    from configuring stereo, when stereo was not already configured.
  * Added support for reporting the tachometer-measured fan speed on capable
    graphics boards via nvidia-settings and the NV-CONTROL API. The preexisting
    mechanism for reporting fan speed reports the speed of the fan as
    programmed by the driver.
    For example, `nvidia-settings --query=[fan:0]/GPUCurrentFanSpeedRPM`.
  * Fixed a regression that caused GPUs that do not support graphics to not
    appear in nvidia-settings.
  * Fixed a bug that caused DisplayPort 1.2 multi-stream devices to stop
    working if they were unplugged and plugged back in while they were
    active in the current MetaMode.
  * Added support for multiple NVIDIA kernel modules. This feature allows
    users to assign different GPUs in the system to different NVIDIA kernel
    modules, potentially reducing the software overhead of coordinating
    access to multiple GPUs.
  * Added support for the EGL API on 32-bit platforms. Currently,
  	the supported client APIs are OpenGL ES 1.1, 2.0 and 3.0, and the only
    supported window system backend is X11.
  * Add a new option, AllowEmptyInitialConfiguration, which allows the
    X server to start even if no connected display devices are detected
    at startup. This option can be enabled by running
    "sudo nvidia-xconfig --allow-empty-initial-configuration"

This option is useful in RandR 1.4 display offload configurations where
    no display devices are connected to the NVIDIA GPU when the X server is
    started, but might be connected later.
    Updated nvidia-installer to provide a scrollable text area for displaying
    messages from the /usr/lib/nvidia/alternate-install-present and
    /usr/lib/nvidia/alternate-install-available distro hook files. This allows
    for longer messages to be provided in these files.
    Updated nvidia-installer to avoid recursing into the per-kernel "build" and
    "source" directories when searching for conflicting kernel modules
    in /lib/modules.
    Added a system memory cache to improve the performance of certain
    X rendering operations that use software rendering fallbacks. The X
    configuration option "SoftwareRenderCacheSize" may be used to configure
    the size of the cache.
    Removed the "DynamicTwinView" X configuration option: dynamic
    reconfiguration of displays is always possible, and can no longer be disabled.
    Fixed a bug that caused nvidia-settings to display incorrect information
    in its display configuration page when all displays on an X screen were
    turned off.
    
  * Updated nvidia-installer to only install the libraries libvdpau and
    libvdpau_trace if an existing installation of libvdpau is not detected
    on the system. This behavior can be overridden with
    the --install-vdpau-wrapper and --no-install-vdpau-wrapper options.

Future NVIDIA Linux installer packages will no longer include copies of
    libvdpau or libvdpau_trace: VDPAU users are recommended to install
    these libraries via other means, e.g. from packages provided by their
    distributors, or by building them from the sources available at:
    http://people.freedesktop.org/~aplattner/vdpau/

-------------------------------------------------------------------
Sat Jul  20 14:45:02 CET 2013 - bumblebee.obs@gmail.com

- Update to 325.08

* Fixed a bug that could cause display flickering after
    setting some scaling configurations.
  * Fixed a bug that prevented the status bar on the
    "PowerMizer" and "X Server XVideo Settings" pages in the
    nvidia-settings control panel from being updated when settings
    were changed by another NV-CONTROL client.
  * Fixed a bug that could cause some UI elements to be duplicated
    in the nvidia-settings control panel following a VT switch on
    X server configurations with multiple NVIDIA X screens.
  * Changed the default PCIe interrupt delivery method from
    virtual-wire to MSI. Note that if the NVIDIA Linux driver fails to
    initialize with an error indicating that it is not receiving interrupts,
    MSI can be disabled by setting the module parameter "NVreg_EnableMSI=0" when
    loading the NVIDIA kernel module.
  * Removed support for Linux 2.4 kernels. The NVIDIA Linux driver now
    requires Linux 2.6.9 or later.
  * Fixed a bug that prevented the creation of a mode via RandR with the same
    name as a previously created mode, even after the previous mode had been deleted.
  * Fixed a bug in nvidia-settings that caused GTK+ theme colors to be ignored
    for some UI elements.
  * Fixed a bug that caused nvidia-settings to write hostname-based color
    correction settings to the .nvidia-settings-rc configuration file,
    even when the "Include X Display Names in the Config File" option was unset.
    This could lead to a long delay when starting nvidia-settings, if a hostname
    saved to the configuration file failed to resolve.
  * Fixed a bug that exposed edge overlap controls on the SLI Mosaic page of
    nvidia-settings on edges where overlap was impossible.
  * Fixed a bug that caused some settings in the nvidia-settings control panel to
    be reset when reprobing displays.
  * Fixed a bug that could cause OpenGL applications that use
    Frame Buffer Objects (FBOs) to crash following a mode switch
    (e.g. changing the resolution of a display or transforming it).
  * Fixed a memory leak that could be triggered by unloading libGL before
    destroying all GLX contexts.
  * Fixed a bug that could cause color correction settings to be applied to
    the wrong display when multiple displays are unplugged and then plugged
    back in again.
  * Fixed a bug that could cause a spurious error message about a missing
    NV-GLX extension when performing indirect rendering from a GLX client with
    the NVIDIA client-side OpenGL libraries to a non-NVIDIA GLX server.
  * Fixed an OpenGL bug that prevented conditional rendering from the
    NV_conditional_render extension from correctly affecting CopyPixels.
  * Improved the rendering performance of complex gradients.
  * Added support for configuring SLI Mosaic and Base Mosaic in the
    "X Server Display Configuration" page of nvidia-settings.
  * Updated nvidia-installer to look for the following files:

/usr/lib/nvidia/alternate-install-available
    /usr/lib/nvidia/alternate-install-present

* These files may be provided by NVIDIA driver installers other than the
    official .run package maintained by NVIDIA, to alert nvidia-installer
    to the presence or availability of an alternative installation method.
    See the nvidia-installer(1) manual page for more information.
  * Fixed an X driver bug where the RandR CRTC panning area and tracking area
    were not getting clamped to the current X screen size when the RandR CRTC
    transitioned from disabled to enabled.
  * Fixed an X driver bug where successful RandR X_RRSetScreenConfig requests
    would update the server's RandR 'lastSetTime' too far, potentially causing
    subsequent RandR requests to be unnecessarily rejected.
  * Fixed an X driver bug that caused GPUs to become inaccessible via the
    NV-CONTROL X extension when no corresponding X screens could be initialized.
  * Generate a BadMatch error when applications attempt to create GLX pixmaps
    using glXCreatePixmap() or glXCreateGLXPixmapWithConfigSGIX() and the pixmap's
    depth doesn't match that of the specified GLXFBConfig.
  * Updated nvidia-settings to explicitly specify the direction of rotation for
    configuring per-display rotation configuration.
  * Honor a GPU UUID as the GPU qualifier for X configuration options that allow
    GPU qualifiers (e.g. "MetaModes").
  * Report GPU UUIDs in the X log when verbose logging is enabled in the X server.
  * Enabled conformant glBlitFrameBuffer() scissor test behavior by default.
    A driver-provided application profile enables the previous non-conformant
    behavior for applications that load libcogl, to work around a bug in older
    versions of libcogl.
  * Application profiles can be added to enable the non-conformant behavior
    for other applications that depend upon it. See the "Known Issues" section of
    the README for more details.
  * Fixed a bug that caused the X server to crash when querying the current mode
    of disabled displays.

-------------------------------------------------------------------
Sat Jul  20 14:32:54 CET 2013 - bumblebee.obs@gmail.com

- Update to 319.32

* Added support for the following GPU:

GeForce GTX 760
    GeForce 720M

* Updated the nvidia-settings control panel to report more
    detailed locking information.
  * Fixed a bug that could cause the X server to crash after power-cycling
    displays connected behind a DisplayPort 1.2 Multi-Stream Transport hub.
  * Fixed a bug that could cause nvidia-settings to crash when switching
    VTs after changing some settings.
  * Updated the application profile syntax to allow for multiple patterns
    within a single rule. See the README for details.
  * Fixed a bug that caused OpenGL programs to crash when the
  __GL_DOOM3 environment variable was set.
  * Updated the NVIDIA driver to avoid calling fork(2) to execute the
    nvidia-modprobe utility when not needed.
  * Improved the error reporting of the nvidia-persistenced utility.
  * Fixed a bug that could cause Altair HyperView to hang when rendering
    animations with tensors.
  * Fixed a performance regression in MEDINA 8.2.
  * Fixed a bug that caused the OpenGL driver to hang sometimes when running
    the SpeedTree Modeler application.
  * Fixed a bug that could cause an OpenGL application to crash if it creates
    and destroys multiple threads.
  * Fixed a bug in nvidia-installer that could cause installation problems
    when the value of the CC environment variable contained spaces,
    e.g. CC="distcc gcc"
  * Fixed a bug that caused corrupted window content in some cases when
    moving GLX windows with antialiasing enabled.
  * Fixed a bug that caused DisplayPort devices that failed link training
    to be reported as connected rather than disconnected.
  * Fixed a regression that could cause a DisplayPort device that was connected
    to one connector to turn off when a DisplayPort device on a different
    connector was connected or disconnected.
  * On Kepler-based GPUs, improved the appearance of the tearing that occurs
    when using RandR 1.4's Source Output capability.While tearing is still
    expected, the tears should now appear as horizontal lines rather than
    more noticeable checkerboard or triangular shapes.
  * Added a "Prefer Consistent Performance" PowerMizer Mode to the
    nvidia-settings control panel, available on Quadro boards that support
    this feature.

-------------------------------------------------------------------
Fri May  31 10:47:12 CET 2013 - bumblebee.obs@gmail.com

- Update to 319.23

* Added support for the following GPUs:
        GeForce GTX 780
  * Fixed a regression that could cause X to crash when querying GPU information
  	through NV-CONTROL on multi-GPU systems where some GPUs failed to be
    initialized for X.
  * Fixed a bug that could cause X to crash when using Vertex Buffer Objects (VBOs)
  	with indirect rendering.
  * Fixed a bug that prevented some drop-down menus in nvidia-settings from
  	working correctly when using older versions of GTK+.
  * Fixed RandR panning reporting when the current MetaMode is smaller than
  	the X screen.
  * Fixed a regression that caused nvidia-installer to attempt post-processing of
  	non-installed files.
  * Added the "ForceCompositionPipeline" and "ForceFullCompositionPipeline" MetaMode
  	options. See the README for details.
  * Added support for HDMI 4K resolutions. Using a 4K resolution with an HDMI display
  	requires a Kepler or later GPU.
  * Added support in VDPAU for 4k resolution MPEG-1/2 and H.264 video decoding,
  	up to 4032x4048 for MPEG-1/2 and 4032x4080 for H.264, and up to 65536 macroblocks for both.

-------------------------------------------------------------------
Fri May  10 18:06:12 CET 2013 - bumblebee.obs@gmail.com

- Update to 319.17

* Added support for the following GPU:

GeForce GTX 650 Ti BOOST
    GeForce GT 720M
    GeForce GT 735M
    GeForce GT 740M
    GeForce GT 745M
    GeForce GT 750M

* Fixed a regression that caused multiple BUG messages to be printed in
    the kernel log on SMP systems.
  * Fixed a bug that could cause the X server to crash when repeatedly
    enabling and disabling displays.
  * Updated nvidia-settings to preserve the relative positioning of displays when
    changing from a layout where multiple displays are on the same X screen to
    one where the same displays span multiple X screens.
  * Fixed nvidia-settings to dlopen(3) "libvdpau.so.1", rather than "libvdpau.so".
  * Added nvidia-persistenced, a daemon utility, to the driver package.
    nvidia-persistenced can be installed to run on system startup or manually
    run to allow the NVIDIA kernel module to keep persistent driver state allocated
    when no other user-space NVIDIA driver components are running. This can improve
    startup time for other user-space NVIDIA driver components.
  * Fixed CVE-2013-0131: NVIDIA UNIX GPU Driver ARGB Cursor Buffer Overflow in
    "NoScanout" Mode. This buffer overflow, which occurred when an X client
    installed a large ARGB cursor on an X server running in NoScanout mode,
    could cause a denial of service (e.g., an X server segmentation fault),
    or could be exploited to achieve arbitrary code execution.

* For more details, see: http://nvidia.custhelp.com/app/answers/detail/a_id/3290

* Added initial support for restoration of efifb consoles on UEFI systems where
    the primary display is driven over VGA or TMDS (e.g. DVI, HDMI, or LVDS).
  * Added support for the xorg.conf Monitor section options "Ignore", "Enable",
    "Primary", and "Rotate".For example, to rotate a monitor identified by
    a specific EDID hash, one could add the following to /etc/X11/xorg.conf or
    a file in /etc/X11/xorg.conf.d:

Section "Monitor"
    Identifier "DPY-EDID-ee6cecc0-fa46-0c33-94e0-274313f9e7eb"
    Option "Rotate" "left"
    EndSection

See the README and the xorg.conf(5) man page for more information.

* Added an Underscan feature in the nvidia-settings X Server Display
    Configuration page which allows the configuration of an underscan border
    around the ViewPortOut.This feature was formerly known as Overscan Compensation.
  * Added support for application profiles to the NVIDIA client-side GLX
    implementation. See the "Application Profiles" chapter of
    the README for more information.
  * Added support to nvidia-installer for crytographically signing the NVIDIA
    kernel module. See the "Installing the NVIDIA Driver" chapter of
    the README for more information.
  * Added the "PanningTrackingArea" and "PanningBorder" MetaMode attributes.
  * Added support for RandR 1.3 panning.
  * Improved performance when the Accel option is disabled.
  * Added initial support for RandR 1.4 Provider objects with the Source Output
    capability, which can be used to render the desktop on an NVIDIA GPU and
    display it on an output connected to a provider with the Sink Output
    capability, such as an Intel integrated graphics device or a
    DisplayLink USB-to-VGA adapter.See the README for details.
  * Added nvidia-modprobe, a setuid root utility, to the driver package.
    nvidia-modprobe can be used by user-space NVIDIA driver components to
    make sure the NVIDIA kernel module is loaded and that the NVIDIA character
    device files are present.When possible, it is recommended to use Linux
    distribution native mechanisms for managing kernel module loading and
    device file creation. This utility is provided as a fallback to work
    out-of-the-box in a distribution-independent way.
  * Updated the nvidia-settings command line interface to accept display
    device names, as well as optional target qualifiers, e.g.

nvidia-settings -q [DVI-I-0]/RefreshRate
    nvidia-settings -q [GPU-1.DVI_I-1]/RefreshRate

* Updated the nvidia-settings command line interface to no longer assume
    the "X screen 0" target, when no target is specified in query and assign
    operations.Instead, all valid targets of the attribute are processed.
  * Fixed a memory leak that occurred when destroying a GLX window but
    not its associated X window.
  * Fixed a bug that could cause nvidia-installer to fail to delete directories
    created as part of a previous installation.
  * Updated nvidia-installer to report failures to remove installed files or
    restore backed up files with a single warning message, instead of a separate
    message for each individual failure.
  * Improved the performance of modesets in cases where the mode timings remained
    the same, but other parameters of the mode configuration, such as the
    ViewPort or panning domain, changed.
  * Fixed an issue with RENDER convolution filters.The driver will no longer
    normalize filter kernels before accelerating them.
  * Improved debuggability of the NVIDIA OpenGL libraries by including proper
    stack unwinding information on all supported architectures.
  * Updated the dkms.conf file and the makefile for the NVIDIA Linux kernel
    module to allow DKMS installations on systems with separate source and
    output directories.
  * Fixed a bug that caused RENDER Pictures to be sampled incorrectly when
    using nearest filtering in some cases.
  * Added support for the RandR "Border" and "BorderDimensions" Output
    properties, which can be used to configure the ViewPortOut of an RandR output.
    This is functionally equivalent to the "ViewPortOut" MetaMode token.
  * Fixed a bug where RRGetCrtcInfo could report incorrect size information
    when an RandR output has a custom ViewPortIn.
  * Further improve performance of some versions of HyperMesh with Quadro GPUs.
  * Added a VDPAU page to the nvidia-settings control panel, to display
    information about the decoding capabilities of VDPAU-capable GPUs.
  * Added support for dynamic mode management through RandR, e.g. via
    the --newmode, --rmmode, and --delmode options in xrandr(1).
  * Increased the number of pages that are shareable across multiple processes
    in the x86 build of libnvidia-glcore.so, by reducing its R_386_PC32
    relocation count.
  * Fixed a bug that caused XVideo applications to receive BadAlloc errors
    after VT switches and mode switches that occurred while a composite
    manager was running.
  * Removed the X driver's support for "CursorShadow".
  * Updated nvidia-installer to attempt unprelinking files whose checksums
    do not match the checksums recorded at installation time.
  * Switched .run package compression from gzip to xz.This provides
    a higher level of compression.

-------------------------------------------------------------------
Wed Apr  10 14:34:29 CET 2013 - bumblebee.obs@gmail.com

- Update to 319.12

* Added support for the following GPU:

GeForce GTX 650 Ti BOOST

* Fixed CVE-2013-0131: NVIDIA UNIX GPU Driver ARGB Cursor Buffer Overflow in
    "NoScanout" Mode. This buffer overflow, which occurred when an X client
    installed a large ARGB cursor on an X server running in NoScanout mode,
    could cause a denial of service (e.g., an X server segmentation fault),
    or could be exploited to achieve arbitrary code execution.

For more details, see: http://nvidia.custhelp.com/app/answers/detail/a_id/3290

* Added initial support for restoration of efifb consoles on UEFI systems where
    the primary display is driven over VGA or TMDS (e.g. DVI, HDMI, or LVDS).
  * Added support for the xorg.conf Monitor section options "Ignore", "Enable",
    "Primary", and "Rotate". For example, to rotate a monitor identified by a specific
    EDID hash, one could add the following to /etc/X11/xorg.conf or a file
    in /etc/X11/xorg.conf.d:

Section "Monitor"
    Identifier "DPY-EDID-ee6cecc0-fa46-0c33-94e0-274313f9e7eb"
    Option "Rotate" "left"
    EndSection

See the README and the xorg.conf(5) man page for more information.

* Added an Underscan feature in the nvidia-settings X Server Display Configuration page
    which allows the configuration of an underscan border around the ViewPortOut.
    This feature was formerly known as Overscan Compensation.
  * Added support for application profiles to the NVIDIA client-side GLX implementation.
    See the "Application Profiles" chapter of the README for more information.
  * Added support to nvidia-installer for crytographically signing the NVIDIA kernel module.
    See the "Installing the NVIDIA Driver" chapter of the README for more information.
  * Added the "PanningTrackingArea" and "PanningBorder" MetaMode attributes.
  * Added support for RandR 1.3 panning.
  * Improved performance when the Accel option is disabled.
  * Added initial support for RandR 1.4 Provider objects with the Source Output capability,
    which can be used to render the desktop on an NVIDIA GPU and display it on an output
    connected to a provider with the Sink Output capability, such as an Intel integrated
    graphics device or a DisplayLink USB-to-VGA adapter.See the README for details.
  * Added nvidia-modprobe, a setuid root utility, to the driver package. nvidia-modprobe can be
    used by user-space NVIDIA driver components to make sure the NVIDIA kernel module is
    loaded and that the NVIDIA character device files are present.When possible, it is
    recommended to use Linux distribution native mechanisms for managing kernel module loading and
    device file creation. This utility is provided as a fallback to work out-of-the-box in
    a distribution-independent way.
  * Updated the nvidia-settings command line interface to accept display device names,
  	as well as optional target qualifiers, e.g.

nvidia-settings -q [DVI-I-0]/RefreshRate
    nvidia-settings -q [GPU-1.DVI_I-1]/RefreshRate

* Updated the nvidia-settings command line interface to no longer assume the "X screen 0" target,
    when no target is specified in query and assign operations.Instead, all valid targets of
    the attribute are processed.
  * Fixed a memory leak that occurred when destroying a GLX window but not its associated X window.
  * Fixed a bug that could cause nvidia-installer to fail to delete directories created as
    part of a previous installation.
  * Updated nvidia-installer to report failures to remove installed files or restore backed up files
    with a single warning message, instead of a separate message for each individual failure.
  * Improved the performance of modesets in cases where the mode timings remained the same,
    but other parameters of the modeconfiguration, such as the ViewPort or panning domain, changed.
  * Fixed an issue with RENDER convolution filters.The driver will no longer normalize filter
    kernels before accelerating them.
  * Improved debuggability of the NVIDIA OpenGL libraries by including proper stack unwinding
    information on all supported architectures.
  * Updated the dkms.conf file and the makefile for the NVIDIA Linux kernel module to allow DKMS
    installations on systems with separate source and output directories.
  * Fixed a bug that caused RENDER Pictures to be sampled incorrectly when using nearest filtering
    in some cases.
  * Added support for the RandR "Border" and "BorderDimensions" Output properties,
    which can be used to configure the ViewPortOut of an RandR output.This is functionally
    equivalent to the "ViewPortOut" MetaMode token.
  * Fixed a bug where RRGetCrtcInfo could report incorrect size information when an RandR output
    has a custom ViewPortIn.
  * Further improve performance of some versions of HyperMesh with Quadro GPUs.
  * Added a VDPAU page to the nvidia-settings control panel, to display information about the
    decoding capabilities of VDPAU-capable GPUs.
  * Added support for dynamic mode management through RandR, e.g. via the --newmode, --rmmode,
    and --delmode options in xrandr(1).
  * Increased the number of pages that are shareable across multiple processes in the x86 build of
    libnvidia-glcore.so, by reducing its R_386_PC32 relocation count.
  * Fixed a bug that caused XVideo applications to receive BadAlloc errors after VT switches and
    mode switches that occurred while a composite manager was running.
  * Removed the X driver's support for "CursorShadow".
  * Updated nvidia-installer to attempt unprelinking files whose checksums do not match the
    checksums recorded at installation time.
  * Switched .run package compression from gzip to xz.This provides a higher level of compression.

-------------------------------------------------------------------
Wed Apr  10 14:34:29 CET 2013 - bumblebee.obs@gmail.com

- Update to 310.44

For more details, see: http://nvidia.custhelp.com/app/answers/detail/a_id/3290

-------------------------------------------------------------------
Mon Mar  11 13:37:01 CET 2013 - bumblebee.obs@gmail.com

- Update to 310.40

* Added support for the following GPUs:

Quadro K4000
        Quadro K2000
        Quadro K2000D
        Quadro K600
        GeForce G205M
        GeForce GT 240M LE
        GeForce 405M
        GeForce 610
        GeForce 615
        GeForce 620M
        GeForce GT 625M
        GeForce GT 625 (OEM)
        GeForce GT 635
        GeForce 705M
        GeForce 710M
        GeForce GT 710M
        GeForce GT 720A
        GeForce GT 730M
        Tesla X2070
        Tesla S2050
        Tesla K20s
  * Reduced the amount of time needed to establish framelock in some stereo
    configurations with many monitors.
  * Fixed a bug where glXSwapIntervalEXT failed to set a swap interval value of zero
    in certain situations.

-------------------------------------------------------------------
Mon Jan  21 15:36:55 CET 2013 - bumblebee.obs@gmail.com

- Update to 310.32

* Added support for the following GPUs:
        GeForce GTX 680MX
        Tesla K20Xm
  * Fixed a bug when enabling framelock between displays connected to the same GPU
    as other displays with different refresh rates, which caused the latter to be
    incorrectly assigned to the framelock group.
  * Updated the reporting of HDMI 3D framerates and pixel clocks to be more consistent
    with how they are reported by HDMI 3D displays.
  * Fixed a bug that sometimes prevented rotation controls in the nvidia-settings
    control panel from working after changing resolutions.
  * Fixed a bug that could cause applications using GL_NV_vdpau_interop to crash
    during modeswitches.
  * Fixed a regression that could cause OpenGL applications to crash while compiling
    shaders.
  * Added a kernel module parameter, "NVreg_EnablePCIeGen3", which can be used to
    enable PCIe gen 3 when possible. Note that on many systems where the NVIDIA driver
    does not allow PCIe gen 3 by default, stability problems can be expected when this
    option is enabled: users should do so at their own risk.
  * Fixed a VDPAU bug that could cause the X server to hang when decoding some corrupted
    video streams.
  * Renamed VGX products to GRID products in the "Supported NVIDIA GPU Products" list.
  * Added support for X.org xserver ABI 14 (xorg-server 1.14).
  * Fixed a bug in nvidia-settings that could cause the wrong resolution to be set in
    basic mode for setups based on one display per X screen.
  * Fixed libnvidia-encode.so library dependency by linking it with libnvcuvid.so.1 instead
    of libnvcuvid.so while creating it.
  * Improved performance of OpenGL framebuffer object binds with Xinerama enabled
    by 2000-3000% when the application's windows do not span screen boundaries.
  * Fix performance issues when using some versions of HyperMesh with Quadro GPUs.

-------------------------------------------------------------------
Sat Dec  22 14:18:11 CET 2012 - bumblebee-project@hotmail.com

- Update to 313.09

* Updated the NVIDIA X driver to reprobe displays when VT-switching to X, to allow
    reporting of hotplug events when displays are connected or disconnected while
    VT-switched away from X.
  * Added unofficial GLX protocol support (i.e for GLX indirect rendering) for the following
    extension and core commands.

ARB_vertex_array_object
      OpenGL 3.0 commands ClearBufferfi, ClearBufferfv, ClearBufferiv, ClearBufferuiv and
      GetStringi.

* Fixed a bug that caused the cursor shadow to be clipped to 32x32 pixels, even on
    Kepler GPUs that support a 256x256 cursor image.
  * Fixed a bug that prevented some cursor image updates from taking effect on displays with
    rotation or other transformations applied.
  * Fixed cursor alpha blending artifacts on displays with rotation or other
    transformations applied.
  * Added support for the GLX_EXT_buffer_age extension.
  * Improved the performance of glDrawPixels() by up to 450% when the pixel data is of
    type GL_BYTE.
  * Fixed libnvidia-encode.so library dependency by linking it with libnvcuvid.so.1 instead of
    libnvcuvid.so while creating it.
  * Improved performance of OpenGL framebuffer object binds with Xinerama enabled by
  	2000-3000% when the application's windows do not span screen boundaries.
  * Fix performance issues when using some versions of HyperMesh with Quadro GPUs.

-------------------------------------------------------------------
Thu Nov  29 09:54:22 CET 2012 - bumblebee-project@hotmail.com

- Update to 310.19

* Added support for OpenGL 4.3.
  * Added a new X configuration option, "UseHotplugEvents", to allow the suppression of
    RandR events when adding or removing non-DisplayPort displays. See the "X Config Options"
    appendix of the README for details.
  * Added support for configuring stereo in nvidia-settings when stereo is enabled in
    the X configuration file.
  * Added support for configuring the ViewPortIn and ViewPortOut for display devices in
    nvidia-settings.
  * Fixed metamode bookkeeping when modifying the display configuration in
    the "X Server Display Configuration" page of nvidia-settings.
  * Added support for configuring rotation and reflection per display device in
    nvidia-settings.
  * Implemented workarounds for two Adobe Flash bugs by applying libvdpau
    commit ca9e637c61e80145f0625a590c91429db67d0a40 to the version of libvdpau shipped with
    the NVIDIA driver.
  * Fixed an issue which affected the performance of moving windows of VDPAU applications when
    run in some composite managers.
  * Added unofficial GLX protocol support (i.e., for GLX indirect rendering) for
    the GL_ARB_pixel_buffer_object OpenGL extension.
  * Added support for HDMI 3D Stereo with Quadro Kepler and later GPUs. See the documentation for
    the "Stereo" X configuration option in the README for details.
  * Added experimental support for OpenGL threaded optimizations, available through
    the __GL_THREADED_OPTIMIZATIONS environment variable. For more information, please refer to
    the "Threaded Optimizations" section in chapter "Specifying OpenGL Environment Variable Settings"
    of the README.
  * Improved performance and responsiveness of windowed OpenGL applications running inside
    a Unity session.

-------------------------------------------------------------------
Tue Oct  16 13:58:37 CET 2012 - bumblebee-project@hotmail.com

- Update to 310.14

* Implemented workarounds for two Adobe Flash bugs by applying libvdpau
    commit ca9e637c61e80145f0625a590c91429db67d0a40 to the version of libvdpau shipped
    with the NVIDIA driver.
  * Fixed an issue which affected the performance of moving windows of VDPAU applications
    when run in some composite managers.
  * Added unofficial GLX protocol support (i.e., for GLX indirect rendering) for
    the GL_ARB_pixel_buffer_object OpenGL extension.
  * Added support for HDMI 3D Stereo with Quadro Kepler and later GPUs. See the documentation
    for the "Stereo" X configuration option in the README for details.
  * Added experimental support for OpenGL threaded optimizations, available through
    the __GL_THREADED_OPTIMIZATIONS environment variable. For more information, please refer to
    the "Threaded Optimizations" section in chapter "Specifying OpenGL Environment Variable
    Settings" of the README.
  * Improved performance and responsiveness of windowed OpenGL applications running
    inside a Unity session.
  * Added support for OpenGL 4.3.
  * Added support for the "Backlight" RandR output property for configuring the brightness of
    some notebook internal panels.
  * Fixed a bug that prevented the Ubuntu Unity launcher panel from unhiding:
    https://bugs.launchpad.net/unity/+bug/1057000
  * Fixed a bug that caused nvidia-installer to sometimes attempt to write a log file in
    a nonexistent directory.
  * Fixed a bug that caused incorrect input transformation after resizing an NVIDIA X screen with
    xserver ABI 12 (xorg-server 1.12) or newer.
  * Fixed a bug that caused GLX to leak memory when Xinerama is enabled.

-------------------------------------------------------------------
Mon Sep  24 13:17:24 CET 2012 - bumblebee-project@hotmail.com

- Update to 304.51

* Added support for the new Quadro Sync board for Quadro Kepler GPUs. See the
    "Configuring Frame Lock and Genlock" chapter in the README for details.
  * Fixed an X server crash on X.Org xserver 1.13 when it is compiled without support for DRI2.
  * Fixed a regression that broke color controls on older X servers.
  * Fixed a bug that sometimes caused the display layout area of the nvidia-settings
    control panel to be laid out incorrectly.
  * Fixed a bug that prevented panning from working correctly after a modeswitch on some
    X servers with support for cursor constraining.
  * Gamma ramp and colormap adjustments now apply correctly when screen transformations such as
    rotation and keystone correction are in use.
  * Fixed RandR per-CRTC gamma persistence across modeswitches and VT-switches. 
  * Fixed a bug that caused the X server to sometimes hang in response to input events.
  * Fixed a reduction in rendering performance for core X11 rendering on certain GPUs that
    occurred in the 290.series of releases.
  * Fixed a bug that prevented PowerMizer from working correctly on some boards with GDDR5 memory,
    such as some GeForce GT 240 SKUs.
  * Fixed a bug that caused OpenGL applications to not animate properly when a rotation or
    a transformation was applied on some older X server versions.
  * Enabled FXAA with Unified Back Buffers.
  * Fixed a bug that prevented the "Reset Hardware Defaults" button in the Display Settings page of
    nvidia-settings from being activated.

-------------------------------------------------------------------
Tue Aug  28 09:27:51 CET 2012 - bumblebee-project@hotmail.com

- Update to 304.43

* Added support for the following GPUs:
        GeForce GTX 660 Ti
        Quadro K5000
        Quadro K5000M
        Quadro K4000M
        Quadro K3000M
        NVS 510
  * Fixed a bug that caused pre-release versions of X.Org xserver 1.13 to crash when certain
    GLX operations were performed, such as when starting Firefox.
  * Fixed a bug that caused VDPAU to hang when expanding the YouTube Flash Player.
  * Fixed a bug that caused gnome-settings-daemon to revert display configuration changes
    made by nvidia-settings.
  * Updated nvidia-settings to use RandR per-CRTC gamma control, when available. When
    controlling an X server with support for RandR 1.2, nvidia-settings will display the color
    correction widget as a tab within each display device page, instead of a per-X screen color
    correction page.
  * Fixed a bug that prevented the display palette from being updated immediately after
    an application called XStoreColors.
  * Added the ability to select and move X screens in the "X Server Display Configuration" page of
    nvidia-settings via Ctrl-(Left)Click + Drag.

-------------------------------------------------------------------
Tue Aug  14 14:46:41 CET 2012 - bumblebee-project@hotmail.com

- Update to 304.37

* Added support for the following GPUs:

GeForce GTX 680M
        Quadro K1000M
        Quadro K2000M
        Tesla K10

* Removed the ability to enable SLI on GPUs with ECC enabled.
  * Fixed several bugs that prevented some RandR transform geometries from being applied.
  * Fixed a bug that caused frequent hangs or crashes on some systems.
  * Fixed a bug that would cause corruption and performance issues in certain OpenGL applications
    such as Amnesia: The Dark Descent on GeForce 6 and 7 GPUs.
  * Fixed a bug that caused applications that use DirectColor visuals, such as
    Enemy Territory: Quake Wars and Braid, to appear in shades of blue instead of
    the correct colors.
  * Modified handling of RRSetScreenSize requests to ignore requests that do not actually resize
    the screen.This reduces screen flicker in certain cases when using GNOME.
  * Added a new option, "--disable-nouveau" to nvidia-installer. This option changes the action
    that is chosen by default when Nouveauis detected by nvidia-installer. If
    the "--disable-nouveau" optionis set, then the default will be to attempt to disable Nouveau
    when it is detected; otherwise, no attempt will be made unless requested.
  * Added support for xserver ABI 13 (xorg-server 1.13).
  * Added support for RandR per-CRTC gamma manipulation through the RandR 1.2 RRGetCrtcGammaSize,
    RRGetCrtcGamma, and RRSetCrtcGamma requests.
  * Fixed a bug that caused RRSetOutputPrimary requests to incorrectly generate BadValue errors
    when setting the primary output to None.This caused gnome-settings-daemon to crash after
    changing the screen configuration in response to a display hotplug or the display change
    hot-key being pressed.
  * Fixed a problem where RENDER Glyphs operations would exhibit severe performance issues in
    certain cases, such as when used with gradients by Cairo and Chromium.
  * Fixed a bug that caused X to hang when resuming certain DisplayPort display devices (such as
    Apple brand mini-DisplayPort to dual-link DVI adapters) from power-saving mode.
  * Fixed a bug that caused an X screen to be extended to Quadro SDI Output devices by default.
    An X screen will still use an SDI Output device if it is the only display device available.
    To use a SDI Output device on an X screen with other display devices available, include
    the SDI Output device with either the "UseDisplayDevice" or "MetaMode" X configuration options.
  * Updated X11 modeline validation such that modes not defined in a display device's EDID are
    discarded if the EDID 1.3 "GTF Supported" flag is unset or if
    the EDID 1.4 "Continuous Frequency" flag is unset. The new "AllowNonEdidModes" token for
    the ModeValidationX configuration option can be used to disable this new check.
  * Fixed a bug, introduced in the 295.xx release series, with EDID detection on some laptop
    internal panels. This bug caused the laptop internal panel to show six small copies of
    the desktop.
  * Added support for FXAA, Fast Approximate Anti-Aliasing. Using regular anti-aliasing modes or
    Unified Back Buffers with FXAA is not currently supported.
  * Enhanced the functionality of the IncludeImplicitMetaModes X configuration option:
    Implicit MetaModes will be added for the primary display device, even if multiple display
    devices are in use when X is initialized.

Implicit MetaModes will be added for common resolutions, even
    if there isn't a mode with that resolution in the mode pool of
    the display device.

Extended the syntax of the IncludeImplicitMetaModes X
    configuration option, e.g., to control which display device is
    used for creation of implicit MetaModes.

See the description of the IncludeImplicitMetaModes X configuration
    option in the README for details.

* Modified the handling of the RandR 1.0/1.1 requests RRGetScreenInfo and RRSetScreenConfig
    (e.g., `xrandr -q --q1` and `xrandr --size ...` and `xrandr --orientation ...`) such that
    they operate on MetaModes. This was the behavior in NVIDIA X driver versions 295.xx and
    earlier, but 302.xx releases altered the handling of these RandR 1.0/1.1 requests to
    operate on a single RandR output's modes.
  * With the above changes to IncludeImplicitMetaModes and RandR 1.0/1.1 handling, fullscreen
    applications (e.g., SDL-based applications, Wine), should have more resolutions available
    to them, and should interact better with multiple monitor configurations.
  * Fixed a bug that could cause G8x, G9x, and GT2xx GPUs to display a black screen or corruption
    after waking up from suspend.
  * Fixed several bugs that could cause some OpenGL programs to hang when calling fork(3).
  * Fixed an nvidia-settings bug that caused the results of ProbeDisplays queries made with
    the --display-device-string option to be formatted incorrectly.
  * Improved the responsiveness of updates to the nvidia-settings control panel when displays
    are hotplugged.
  * Fixed a bug that caused display corruption when setting some transforms, especially when
    panning a transformed display.
  * Fixed a bug that caused extra RandR events to be generated the first time a display is
    hotplugged.
  * Fixed a bug that caused X11 modelines with '@' in their names to be rejected.
  * Added support for DisplayPort 1.2 branch devices, which allow multiple displays to be
    connected to a single DisplayPort connector on a graphics board.
  * Fixed a bug that caused most OpenGL texture uploads to be slow when the context was
    bound rendering to an RGB overlay drawable.
  * Fixed a bug that caused audio over HDMI to not work after restarting the X server on
    some MCP7x (IGP) GPUs.
  * Updated the X configuration option "UseDisplayDevice" to honor the value "none" on any GPU.
  * Added support for DKMS in nvidia-installer. Installing the kernel module through DKMS
    allows the module to be rebuilt automatically when changing to a different Linux kernel.
    See the README and the nvidia-installer help text for the "--dkms" option.
  * Added RandR output properties _ConnectorLocation, ConnectorNumber, ConnectorType, EDID,
   _GUID, and SignalFormat. See the README for details on these properties.
  * Extended support for Base Mosaic to all G80+ SLI configurations with up to three displays.
  * Fixed a bug that caused some monitors to fail to wake from DPMS suspend mode when
    multiple DisplayPort monitors were attached to one GPU.
  * Removed controls for XVideo attributes from the "X Server XVideo Settings" page of
    the nvidia-settings control panel. XVideo attributes can be configured in XVideo player
    applications, or through utilities such as xvattr.
  * Fixed a bug that caused all ports on an XVideo adaptor to share color correction settings.
  * Removed support for the following X configuration options:

SecondMonitorHorizSync
      SecondMonitorVertRefresh

Similar control is available through the NVIDIA HorizSync and
    VertRefresh X configuration options. Please see the NVIDIA driver
    README for details.

* Fixed a bug that prevented NVIDIA 3D Vision Pro from working properly when switching
    between X servers on different VTs.
  * Added support for desktop panning when rotation, reflection, or transformation is applied
    to a display device (either through RandR or through the MetaMode syntax); panning would
    previously be ignored in that case.
  * Implemented hotfix for a privilege escalation vulnerability reported on August 1, 2012.
    For more details, see: http://nvidia.custhelp.com/app/answers/detail/a_id/3140

-------------------------------------------------------------------
Tue Aug  7 10:43:26 CET 2012 - bumblebee-project@hotmail.com

- Update to 304.32

* Implemented hotfix for a privilege escalation vulnerability reported on August 1, 2012.
    For more details, see: http://nvidia.custhelp.com/app/answers/detail/a_id/3140
  * Fixed a bug that caused applications that use Direct Color visuals, such as
    Enemy Territory: Quake Wars and Braid, to appear in shades of blue instead of
    the correct colors.
  * Modified handling of RRSetScreenSize requests to ignore requests that do not actually resize
    the screen. This reduces screen flicker in certain cases when using GNOME.
  * Added a new option, "--disable-nouveau" to nvidia-installer. This option changes the action
    that is chosen by default when Nouveau is detected by nvidia-installer. If
    the "--disable-nouveau" optionis set, then the default will be to attempt to disable Nouveau
    when it is detected; otherwise, no attempt will be made unless requested.

-------------------------------------------------------------------
Thu Aug  2 11:34:07 CET 2012 - bumblebee-project@hotmail.com

- Update to 304.30

* Added support for the following GPU:
        Tesla K10
  * Added support for RandR per-CRTC gamma manipulation through the
    RandR 1.2 RRGetCrtcGammaSize, RRGetCrtcGamma, and RRSetCrtcGamma requests.
  * Fixed a bug that caused RRSetOutputPrimary requests to incorrectly generate BadValue
    errors when setting the primary output to None. This caused gnome-settings-daemon to
    crash after changing the screen configuration in response to a display hotplug or the
    display change hot-key being pressed.
  * Fixed a problem where RENDER Glyphs operations would exhibit severe performance issues
    in certain cases, such as when used with gradients by Cairo and Chromium.
  * Fixed a bug that caused X to hang when resuming certain DisplayPort display devices
    (such as Apple brand mini-DisplayPort to dual-link DVI adapters) from power-saving mode.
  * Fixed a bug that caused an X screen to be extended to Quadro SDI Output devices by default.
    An X screen will still use an SDI Output device if it is the only display device available.
    To use a SDI Output device on an X screen with other display devices available, include the
    SDI Output device with either the "UseDisplayDevice" or "MetaMode" X configuration options.
  * Updated X11 modeline validation such that modes not defined in a display device's EDID are
    discarded if the EDID 1.3 "GTF Supported" flag is unset or if the EDID 1.4 "Continuous Frequency"
    flag is unset. The new "AllowNonEdidModes" token for the ModeValidation X configuration option
    can be used to disable this new check.
  * Fixed a bug, introduced in the 295.xx release series, with EDID detection on some laptop
    internal panels. This bug caused the laptop internal panel to show six small copies of
    the desktop.
  * Added support for FXAA, Fast Approximate Anti-Aliasing.

-------------------------------------------------------------------
Thu Aug  2 11:15:47 CET 2012 - bumblebee-project@hotmail.com

- Update to 304.22

* Added support for the following GPUs:
        GeForce GTX 680M
        Quadro K1000M
        Quadro K2000M
  * Enhanced the functionality of the IncludeImplicitMetaModes X configuration option:
        Implicit MetaModes will be added for the primary display device, even if multiple
          display devices are in use when X is initialized.
        Implicit MetaModes will be added for common resolutions, even if there isn't a mode
          with that resolution in the mode pool of the display device.
        Extended the syntax of the IncludeImplicitMetaModes X configuration option,
          e.g., to control which display device is used for creation of implicit MetaModes.
    See the description of the IncludeImplicitMetaModes X configuration option in the README
    for details.
  * Modified the handling of the RandR 1.0/1.1 requests RRGetScreenInfo and RRSetScreenConfig
    (e.g., `xrandr -q --q1` and `xrandr --size ...` and `xrandr --orientation ...`) such that
    they operate on MetaModes. This was the behavior in NVIDIA X driver versions 295.xx and
    earlier, but 302.xx releases altered the handling of these RandR 1.0/1.1 requests to
    operate on a single RandR output's modes.
  * With the above changes to IncludeImplicitMetaModes and RandR 1.0/1.1 handling, fullscreen
    applications (e.g., SDL-based applications, Wine), should have more resolutions available
    to them, and should interact better with multiple monitor configurations.
  * Fixed a bug that could cause G8x, G9x, and GT2xx GPUs to display a black screen or
    corruption after waking up from suspend.
  * Fixed several bugs that could cause some OpenGL programs to hang when calling fork(3).
  * Fixed an nvidia-settings bug that caused the results of ProbeDisplays queries made with
    the --display-device-string option to be formatted incorrectly.
  * Improved the responsiveness of updates to the nvidia-settings control panel when displays
    are hotplugged.
  * Fixed a bug that caused display corruption when setting some transforms, especially when
    panning a transformed display.
  * Fixed a bug that caused extra RandR events to be generated the first time a display is
    hotplugged.
  * Fixed a bug that caused X11 modelines with '@' in their names to be rejected.
  * Added support for DisplayPort 1.2 branch devices, which allow multiple displays to be
    connected to a single DisplayPort connector on a graphics board.
  * Fixed a bug that caused most OpenGL texture uploads to be slow when the context was bound
    rendering to an RGB overlay drawable.
  * Fixed a bug that caused audio over HDMI to not work after restarting the X server on some
    MCP7x (IGP) GPUs.
  * Updated the X configuration option UseDisplayDevice to honor the value none on any GPU.
  * Added support for DKMS in nvidia-installer. Installing the kernel module through DKMS allows
    the module to be rebuilt automatically when changing to a different Linux kernel. See the
    README and the nvidia-installer help text for the --dkms option.
  * Added RandR output properties _ConnectorLocation, ConnectorNumber, ConnectorType, EDID, _GUID,
    and SignalFormat. See the README for details on these properties.
  * Extended support for Base Mosaic to all G80+ SLI configurations with up to three displays.
  * Fixed a bug that caused some monitors to fail to wake from DPMS suspend mode when multiple
    DisplayPort monitors were attached to one GPU.
  * Removed controls for XVideo attributes from the "X Server XVideo Settings" page of the
    nvidia-settings control panel. XVideo attributes can be configured in XVideo player applications,
    or through utilities such as xvattr.
  * Fixed a bug that caused all ports on an XVideo adaptor to share color correction settings.
  * Removed support for the following X configuration options:
        SecondMonitorHorizSync
        SecondMonitorVertRefresh
    Similar control is available through the NVIDIA HorizSync and VertRefresh X configuration options.
    Please see the NVIDIA driver README for details.
  * Fixed a bug that prevented NVIDIA 3D Vision Pro from working properly when switching between
    X servers on different VTs.

-------------------------------------------------------------------
Tue Jun 19 11:36:43 CET 2012 - bumblebee-project@hotmail.com

- Update to 302.17

* Added support for the following GPUs:
        GeForce GT 620M
        GeForce GT 640M
        GeForce GT 640M LE
        GeForce GT 650M
        GeForce GTX 660M
        GeForce GTX 670M
        GeForce GTX 675M
        GeForce GTX 555
        GeForce GTX 560 SE
        GeForce GT 415
        GeForce GTX 460 v2
        NVS 5400M
        NVS 310
        Quadro 410
  * Made nvidiaXineramaInfoOrder consistent with the RRSetOutputPrimary and
    RRGetOutputPrimary RandR requests: changes to either nvidiaXineramaInfoOrder or
    RandR OutputPrimary will be reflected in the other.
  * Fixed an interaction problem between RandR 1.2, ConstrainCursor, and panning that prevented
    panning from working properly.
  * Fixed a bug that caused RandR RRNotify_CrtcChange events to not be generated when switching
    between MetaModes with the same total size but different layout of display devices. This bug
    caused some window managers to not update their layouts in response to switching same-sized
    MetaModes.
  * Added support for desktop panning when rotation, reflection, or transformation is applied
    to a display device (either through RandR or through the MetaMode syntax); panning would
    previously be ignored in that case.
  * Added an "EDID" property to RandR 1.2 outputs. This property contains the binary contents of
    the connected monitor's extended display identification data, which allows applications such as
    the GNOME display properties dialog to query information about it.
  * Fixed a bug that caused audio over HDMI to not work on some GPUs after querying the RandR
    configuration (e.g., `xrandr -q`).
  * Added the "nvidiaXineramaInfo" X configuration option to report the layout of multiple display
    devices within an X screen. This is enabled by default. When disabled on X servers with
    RandR 1.2 support, the NVIDIA X driver will report one screen-sized region. When disabled on
    X servers without RandR 1.2 support, no Xinerama information will be reported. For backwards
    compatibility, the "NoTwinViewXineramaInfo" option disables nvidiaXineramaInfo.
  * Added the "nvidiaXineramaInfoOrder" X configuration option as a replacement for
    "TwinViewXineramaInfoOrder". For backwards compatibility, "TwinViewXineramaInfoOrder" is kept as
    a synonym for "nvidiaXineramaInfoOrder".
  * Added the "nvidiaXineramaInfoOverride" X configuration option as a replacement for
    "TwinViewXineramaInfoOverride". For backwards compatibility, "TwinViewXineramaInfoOverride" is kept
    as a synonym for "nvidiaXineramaInfoOverride".
  * Fixed a bug that prevented the use of some SLI Mosaic topologies.
  * Added the "MetaModeOrientation" X configuration option as a replacement for "TwinViewOrientation".
    "TwinViewOrientation" is kept as a synonym for "MetaModeOrientation", for backwards compatibility.
  * Disabled the use of certain OpenGL optimizations with Autodesk Maya and Mudbox, due to conflicts
    between these applications and the optimizations. Some performance loss in Autodesk Maya and
    Mudbox is possible, as a result.
  * Fixed a behavior issue where redundant DPMS state transitions were leading to unexpected screen
    blanking on DisplayPort displays.

-------------------------------------------------------------------
Wed Jun 13 10:17:45 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.59

* Added support for the following GPUs:

NVS 5400M
        NVS 310
        GeForce GT 620M
        GeForce GT 640M
        GeForce GT 640M LE
        GeForce GT 650M
        GeForce GTX 660M
        GeForce GTX 670M
        GeForce GTX 675M
        GeForce GTX 555
        GeForce GTX 560 SE
        GeForce GT 415
        GeForce GTX 460 v2
        
  * Disabled the use of certain OpenGL optimizations with Autodesk Maya and Mudbox, due to
    conflicts between these applications and the optimizations. Some performance loss in
    Autodesk Maya and Mudbox is possible, as a result.
  * Fixed a behavior issue where redundant DPMS state transitions were leading to unexpected
    screen blanking on DisplayPort displays.

-------------------------------------------------------------------
Thu May 31 15:34:52 CET 2012 - bumblebee-project@hotmail.com

- Update to 302.11

* Added support for the following GPUs:
        GeForce GTX 690
        GeForce GTX 670
        GeForce 605
        GeForce GT 610
        GeForce GT 630
        GeForce GT 640
        GeForce GT 645
  * Fixed a bug affecting some G-Sync configurations which could cause active stereo content to be
    inverted on some display devices.
  * Added support for calculating the physical size and DPI of each RandR 1.2 Output using the
    EDID Detailed Timing Description.
  * Fixed a bug that prevented a workaround for the invalid EDID in certain AUO laptop flat panels
    from being applied, leading to an 800x600 desktop repeated several times across the screen.
  * Fixed a bug that caused the link configuration of DisplayPort devices to be reported incorrectly
    in nvidia-settings.

-------------------------------------------------------------------
Thu May 31 15:34:46 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.53

* Added support for the following GPU:

GeForce GTX 670
        GeForce 605
        GeForce GT 610
        GeForce GT 630
        GeForce GT 640
        GeForce GT 645

* Fixed a bug affecting some G-Sync configurations which could cause active stereo content to be
    inverted on some display devices.

-------------------------------------------------------------------
Fri May  4 23:52:21 CET 2012 - bumblebee-project@hotmail.com

- Update to 302.07

* Fixed a bug that caused OpenGL programs to leak file descriptors when calling exec().
  * Fixed rendering corruption at the start of new X server generation.
  * Added X driver support for RandR 1.2 and RandR 1.3.
    See "Support for the X Resize and Rotate Extension" in the README for details.
  * Extended the MetaMode X configuration option syntax with the following new attributes:
        Rotation : specifies the display device's rotation
        Reflection : specifies the display device's reflection
        Transform : specifies a 3x3 transformation matrix to be applied to the display device
        ViewPortOut : specifies the region of the mode in which to display pixels
        ViewPortIn : specifies the size of the region in the X screen to display in the ViewPortOut

For example, "DFP-0: nvidia-auto-select { Rotation=left }".
    See "Configuring Multiple Display Devices on One X Screen" in the README for details.
  * Removed the TwinView X configuration option; the functionality it provided is now enabled by default.

Previously, the NVIDIA X driver only enabled one display device for an X screen unless TwinView was
    enabled. Now, the NVIDIA X driver enables, by default, as many display devices as the GPU supports
    driving simultaneously. To limit how many display devices are driven by an X screen,
    use the UseDisplayDevice X configuration option.
  * Added a CurrentMetaMode attribute to the nvidia-settings command line,
    to query and set the current MetaMode.

As an example, these two commands are equivalent:

xrandr --output DVI-I-2 --mode 1280x1024 --pos 0x0 --output DVI-I-3 --mode 1920x1200 --pos 1280x0

nvidia-settings --assign CurrentMetaMode="DVI-I-2: 1280x1024 +0+0, DVI-I-3: 1920x1200 +1280+0"
  * Removed overscan compensation configurability from NV-CONTROL and nvidia-settings. This can be
    configured, with finer granularity, through the ViewPortIn and ViewPortOut MetaMode attributes.
    See "Configuring Multiple Display Devices on One X Screen" in the README for details.
  * Altered mode validation such that for digital display devices the X driver only allows, by default,
    modes which are reported in the EDID. Previously, the NVIDIA X driver allowed other modes,
    but implicitly scaled those other modes to one of the EDID modes.

Now, only the modes in the EDID are validated and the X driver does not do any implicit scaling.
    Any desired scaling can be configured explicitly through the new ViewPortIn and
    ViewPortOut MetaMode attributes.
    See "Configuring Multiple Display Devices on One X Screen" in the README for details.
  * Removed Flat Panel Scaling configurability in nvidia-settings. Any desired scaling can be
    configured through the new ViewPortIn and ViewPortOut MetaMode attributes.
  * Hotplug events (specifically, the RRNotify_OutputChange RandR event) are now generated when
    display devices are connected and disconnected from the GPU. Many desktop environments
    automatically resize the X desktop in response to these events.
  * Added display device name aliases, such that X configuration options that use display device
    names can refer to a display device by one of several names, including the RandR Output name
    for the display device. The X log reports the list of aliases for each display device.
  * Updated EDID parsing to include more complete support for EDID 1.4 and more recent versions
    of CEA-861.
  * Removed the Rotate X configuration option. This was used to statically rotate the X screen.
    Its functionality is replaced by the Rotation MetaMode attribute and RandR 1.2 rotation support.
    See the README for details.
  * Removed the RandRRotation X configuration option. This enabled configurability of X screen
    rotation via RandR 1.1. Its functionality is replaced by the Rotation MetaMode attribute and
    RandR 1.2 rotation support. See the README for details.
  * Removed support for the following NV-CONTROL attributes:
        NV_CTRL_GPU_SCALING
        NV_CTRL_GPU_SCALING_DEFAULT_TARGET
        NV_CTRL_GPU_SCALING_DEFAULT_METHOD
        NV_CTRL_DFP_SCALING_ACTIVE
        NV_CTRL_GPU_SCALING_ACTIVE
        NV_CTRL_FRONTEND_RESOLUTION
        NV_CTRL_BACKEND_RESOLUTION
        NV_CTRL_OVERSCAN_COMPENSATION
        NV_CTRL_FLATPANEL_BEST_FIT_RESOLUTION
  * Improved rendering performance for RENDER bitmap text.
  * Enabled the OpenGL "Sync to VBlank" option by default.
  * Added a new option, --restore-original-backup, to nvidia-xconfig. nvidia-xconfig creates a
    backup of the original X configuration file when modifying an X configuration file that does not
    appear to have been previously modified by nvidia-xconfig. This option restores a backup of the
    original X configuration file, if such a backup is found.
  * Expose the following additional FSAA modes via NV-CONTROL, nvidia-settings, and through X visuals
    and GLXFBConfigs:
        16X multisample FSAA on all GeForce GPUs
        Coverage sample FSAA on G80 and above GeForce GPUs
        32X multisample FSAA on G80 and above Quadro GPUs
        64X multisample FSAA on Fermi and above Quadro GPUs
  * Enabled conformant texture clamping by default in OpenGL.
  * Removed support for the GVO Clone mode NV-CONTROL attributes:
        NV_CTRL_GVO_DISPLAY_X_SCREEN
        NV_CTRL_GVO_X_SCREEN_PAN_X
        NV_CTRL_GVO_X_SCREEN_PAN_Y
  * Added a new, higher resolution icon for nvidia-settings.
  * Updated the NVIDIA X driver's handling of X configuration options that affect an entire GPU,
    not just a particular X screen running on a GPU (e.g., NoPowerConnectorCheck):
    for such X configuration options, the X driver will now honor the option on any of
    the X screens configured on the GPU. Prior to this change, the NVIDIA X driver only honored 
    such options on the first X screen configured on a GPU.
  * Added a checkbox to nvidia-settings to control the texture clamping attribute. When the box is
    checked, OpenGL textures are clamped according to the OpenGL specification. When it is unchecked,
    GL_CLAMP is remapped to GL_CLAMP_TO_EDGE for borderless 2D textures.
  * Removed the "Display" and "X Screen" tabs from the "X Server Display Configuration Page" of
    nvidia-settings, and added a new "Selection" dropdown menu for selecting X screens or display
    devices. This makes it easier to select X screens/Displays that are hidden.
  * Fixed a problem where starting, stopping, and moving OpenGL application windows was very slow
    on Quadro FX 4600, Quadro FX 5600, GeForce 8800 GTX, GeForce 8800 GTS, and GeForce 8800 Ultra.
  * Fixed an OpenGL performance regression which affected Geforce 6 and Geforce 7 series integrated GPUs.

-------------------------------------------------------------------
Fri May  4 23:22:04 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.49

* Added support for the following GPU:
        GeForce GTX 690
  * Fixed a problem where starting, stopping, and moving OpenGL application windows was very slow on
    Quadro FX 4600, Quadro FX 5600, GeForce 8800 GTX, GeForce 8800 GTS, and GeForce 8800 Ultra.
  * Fixed an OpenGL performance regression which affected Geforce 6 and Geforce 7 series integrated GPUs.

-------------------------------------------------------------------
Thu Apr 12 10:39:13 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.40

* Closed a security vulnerability which made it possible for attackers to reconfigure GPUs
    to gain access to arbitrary system memory. For further details,
    see: http://nvidia.custhelp.com/app/answers/detail/a_id/3109
  * Fixed a bug that caused DisplayPort devices to occasionally fail to turn back on after
    the system is resumed from suspend.
  * Added a ModeValidation X configuration option token, "AllowNon3DVisionModes", to allow modes
    that are not optimized for NVIDIA 3D Vision to be validated on 3D Vision monitors.
  * Added support for the following GPUs:
      GeForce GT 635M
      GeForce GT 610

-------------------------------------------------------------------
Sun Apr  1 22:37:51 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.33

* Added support for the following GPUs:
      GeForce GTX 680
      GeForce GT 630M
      GeForce GT 620
  * Fixed a VDPAU bug where decoding some H.264 streams would cause hardware errors on lower-end products,
    resulting in corruption and poor performance.
  * Fixed a bug that caused DisplayPort audio to stop working after monitors are hotplugged on GeForce GT 520.
  * Improved compatibility with recent Linux kernels.
  * Fixed a behavior change that prevented ConnectedMonitor from being usable with DisplayPort connectors.
  * Marked the GVO Clone mode NV-CONTROL attributes:

NV_CTRL_GVO_DISPLAY_X_SCREEN
      NV_CTRL_GVO_X_SCREEN_PAN_X
      NV_CTRL_GVO_X_SCREEN_PAN_Y

as deprecated. They will be removed in a future release. To display an X screen over GVO,
    it is recommended to use GVO with MetaModes, instead.
  * Fixed a bug that caused DisplayPort devices to not be listed in Xorg.*.log. For example,
    if only DisplayPort devices are attached, the log file would contain
      Quote:
        (--) NVIDIA(0): Connected display device(s) on NVIDIA GPU at PCI:2:0:0
        (--) NVIDIA(0): none
  * Added support for 3D Vision ready displays that have a NVIDIA 3D Vision infrared emitter
    built inside the panel itself.
  * Fixed a bug that caused OpenGL applications to crash with some libc versions, such as eglibc 2.15.
  * Fixed a bug that caused HDMI audio to stop working on AppleTV devices when an X server was started.

-------------------------------------------------------------------
Thu Feb 16 10:05:40 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.20

* Fixed a bug that caused black areas to appear on the back faces of some models in Maya.
  * Fixed a bug that resulted in the printing of spurious loader error messages.
  * Fixed a bug that could cause X to crash after hotplugging displays.
  * Fixed a bug which caused face selections to be misrendered in Maya when using the paint selection tool.
  * Improved performance for interactive tools in Mudbox.
  * Added a "--no-opengl-files" option to nvidia-installer to allow installation of the driver without OpenGL files that might conflict with already installed OpenGL implementations.
  * Split the DFP configuration page in nvidia-settings into multiple tabs, allowing the controls to be displayed on smaller screens.

-------------------------------------------------------------------
Fri Feb 10 13:30:25 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.17

* Fixed a bug that prevented the internal panel from working on some laptops with GeForce 7 series GPUs.
  * Added support for xserver 1.11.99.901 (also known as 1.12 RC1).

-------------------------------------------------------------------
Mon Jan  2 13:44:04 CET 2012 - bumblebee-project@hotmail.com

- Update to 295.09

* Added support for the following GPU:
  *      Tesla X2090
  * Fixed an OpenGL bug where using display lists on Fermi-based GPUs could result in missing rendering in some cases.
  * Fixed an OpenGL bug that caused incorrect rendering when using framebuffer objects to render to 16-bit color textures with alpha.
  * Fixed two bugs that caused sporadic application crashes in some multi-threaded OpenGL applications.
  * Fixed a bug that caused creating OpenGL 4.2 contexts with glXCreateContextAttribsARB to fail.
  * Fixed a bug that caused OpenGL to print

Xlib: extension "NV-GLX" missing on display ":0".

when used with a non-NVIDIA implementation of the GLX X extension.
  * Implemented color depth 30 (10 bits per component) support for GeForce 8 series and higher GPUs.
  * Implemented support for constraining cursors to the visible regions of connected displays; see the "ConstrainCursor" X Option in the README for details.
  * Fixed a bug that would cause Firefox to abort on pages with Flash when layers acceleration was force-enabled on Linux and Solaris.

-------------------------------------------------------------------
Thu Dec  8 22:29:53 CET 2011 - bumblebee-project@hotmail.com

- Update to 290.10

* Fixed a bug that would cause OpenGL applications to crash when run with recent releases of glibc such as glibc 2.14.90.
  * Improved the performance of FBO bind operations when using Xinerama by ~30% in some cases.
  * Fixed a bug that could cause stereo corruption when driving a stereo display and a non-stereo display from the same GPU.
  * Fixed a bug that could cause display devices on a secondary GPU to get swapped between X screens when restarting the X server.
  * Fixed a bug that could result in line flickering in full-scene anti- aliasing contexts.
  * Fixed a bug that caused the physical dimensions of rotated monitors to be reported incorrectly.
  * Add support for the pre-VBO DrawArrays command in the server-side GLX driver module. The NVIDIA client-side GLX implementation never sends this command, but the server needs to support it for compatibility with other GLX client implementations.
  * Fixed a regression that caused blank/white windows when exhausting video memory on GeForce 6 and 7 series GPUs while using composited desktops.
  * Fixed a bug that caused a crash when glDrawArrays was used with a non-VBO vertex attribute array to draw on a Xinerama screen other than screen 0 using an indirect GLX context.

-------------------------------------------------------------------
Tue Oct 25 10:51:47 CEST 2011 - bumblebee-project@hotmail.com

- Update to 290.03
  * Added support for the following GPU:
        GeForce 510
  * Fixed a bug that prevented the driver from loading on some systems with integrated graphics.
  * Fixed issues in VDPAU that prevented allocating and displaying extremely large VdpOutputSurfaces.
  * Added support for limiting heap allocations in the OpenGL driver through the use of the __GL_HEAP_ALLOC_LIMIT environment variable. See the README for further details.
  * Added an "Accel" option to the X driver to allow disabling its use of the graphics processing hardware. This is useful when other components, such as CUDA, require exclusive use of the GPU's processing cores.
  * Modified how the OpenGL driver allocates executable memory so it may continue to function properly if /tmp is mounted noexec. As some fallback allocation methods may be prohibited under SELinux policy, the driver now supports detection of this policy as well as manual override of this detection via the __GL_SELINUX_BOOLEANS environment variable.
  * Fixed a bug that caused various GLSL built-in uniforms to not be updated properly when calling glPopAttrib.
  * Improved performance by caching compiled OpenGL shaders to disk. Added a "GLShaderDiskCache" option to the X driver to enable/disable this feature. Added the __GL_SHADER_DISK_CACHE and __GL_SHADER_DISK_CACHE_PATH environment variables for further configuration. See the README for further details.
  * Fixed a bug that caused trapezoid and triangle rendering to be very slow on older GPUs with xorg-server 1.11.

-------------------------------------------------------------------
Sat Oct  8 16:02:49 CEST 2011 - bumblebee-project@hotmail.com

- Update to 285.05.09
  * Added support for the following GPU:
        GeForce GT 520MX
  * Added support for xserver ABI 11 (xorg-server 1.11).
  * Fixed a bug causing a Linux kernel BUG when retrieving CPU information on some systems.
  * Fixed a bug causing some applications to hang on exit.
  * Fixed a bug causing flickering in some GPU/display combinations.
  * Fixed a bug that could result in poor OpenGL performance after hotplugging a monitor.
  * Fixed a bug causing possible text corruption when recovering from GPU errors.

-------------------------------------------------------------------
Sun Sep 25 16:23:03 CEST 2011 - bumblebee-project@hotmail.com

- Initial release.

Places

File dkms-nvidia.changes of Package x11-video-nvidia (Revision ddfd5cfced69f92fe4d984b4b478a219)

Places