File 1395-Fix-typos-repeated-words-doc-ci-skip.patch of Package erlang
From d9a29bfd6747ab4a67b4426775fe6f2ac1e35ac8 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marc-Andr=C3=A9=20Lafortune?= <github@marc-andre.ca>
Date: Sat, 5 Feb 2022 14:19:12 -0500
Subject: [PATCH] Fix typos (repeated words) [doc] [ci skip]
---
erts/emulator/beam/beam_common.c | 6 +++---
erts/emulator/beam/bif.c | 4 ++--
erts/emulator/beam/emu/emu_load.c | 2 +-
erts/emulator/beam/erl_arith.c | 2 +-
erts/emulator/beam/erl_bif_port.c | 2 +-
erts/emulator/beam/erl_map.c | 2 +-
erts/emulator/beam/erl_md5.c | 2 +-
erts/emulator/beam/erl_proc_sig_queue.c | 2 +-
erts/emulator/beam/erl_thr_queue.c | 2 +-
erts/emulator/beam/erl_trace.c | 4 ++--
erts/emulator/drivers/common/inet_drv.c | 2 +-
erts/emulator/pcre/pcre_compile.c | 6 +++---
erts/emulator/pcre/pcre_exec.c | 8 ++++----
erts/emulator/pcre/pcre_maketables.c | 2 +-
erts/emulator/pcre/pcre_valid_utf8.c | 4 ++--
erts/emulator/sys/unix/sys_signal_stack.c | 2 +-
erts/emulator/sys/win32/erl_win32_sys_ddll.c | 2 +-
erts/emulator/sys/win32/sys.c | 4 ++--
erts/emulator/zlib/inftrees.c | 2 +-
erts/epmd/src/epmd_srv.c | 2 +-
erts/lib_src/common/ethr_mutex.c | 2 +-
lib/erl_interface/src/connect/ei_connect.c | 2 +-
lib/erl_interface/src/decode/decode_fun.c | 2 +-
lib/erl_interface/src/misc/eimd5.c | 2 +-
lib/erl_interface/src/prog/erl_call.c | 2 +-
25 files changed, 36 insertions(+), 36 deletions(-)
diff --git a/erts/emulator/beam/beam_emu.c b/erts/emulator/beam/beam_emu.c
index 75a74e6fcf..13b5a51f90 100644
--- a/erts/emulator/beam/beam_emu.c
+++ b/erts/emulator/beam/beam_emu.c
@@ -841,7 +841,7 @@ gather_stacktrace(Process* p, struct StackTrace* s, int depth)
*
* There is an issue with line number information. Line number
* information is associated with the address *before* an operation
- * that may fail or be stored stored on the stack. But continuation
+ * that may fail or be stored on the stack. But continuation
* pointers point after its call instruction, not before. To avoid
* finding the wrong line number, we'll need to adjust them so that
* they point at the beginning of the call instruction or inside the
@@ -2179,7 +2179,7 @@ erts_gc_update_map_assoc(Process* p, Eterm* reg, Uint live,
old_keys++, old_vals++, num_old--;
} else { /* Replace or insert new */
GET_TERM(new_p[1], *hp++);
- if (c > 0) { /* If new new key */
+ if (c > 0) { /* If new key */
*kp++ = new_key;
} else { /* If replacement */
*kp++ = key;
diff --git a/erts/emulator/beam/bif.c b/erts/emulator/beam/bif.c
index e81b4c3c1e..b9b3a93ee3 100644
--- a/erts/emulator/beam/bif.c
+++ b/erts/emulator/beam/bif.c
@@ -1314,7 +1314,7 @@ BIF_RETTYPE error_3(BIF_ALIST_3)
/**********************************************************************/
/*
* This is like exactly like error/1. The only difference is
- * that Dialyzer thinks that it it will return an arbitrary term.
+ * that Dialyzer thinks that it will return an arbitrary term.
* It is useful in stub functions for NIFs.
*/
@@ -1327,7 +1327,7 @@ BIF_RETTYPE nif_error_1(BIF_ALIST_1)
/**********************************************************************/
/*
* This is like exactly like error/2. The only difference is
- * that Dialyzer thinks that it it will return an arbitrary term.
+ * that Dialyzer thinks that it will return an arbitrary term.
* It is useful in stub functions for NIFs.
*/
diff --git a/erts/emulator/beam/erl_arith.c b/erts/emulator/beam/erl_arith.c
index 5d475ed061..fbb0fd5227 100644
--- a/erts/emulator/beam/erl_arith.c
+++ b/erts/emulator/beam/erl_arith.c
@@ -710,7 +710,7 @@ erts_mixed_times(Process* p, Eterm arg1, Eterm arg2)
return res;
} else {
/*
- * The result is a a big number.
+ * The result is a big number.
* Allocate a heap fragment and copy the result.
* Be careful to allocate exactly what we need
* to not leave any holes.
diff --git a/erts/emulator/beam/erl_md5.c b/erts/emulator/beam/erl_md5.c
index 8d0352a367..f4b6301b5c 100644
--- a/erts/emulator/beam/erl_md5.c
+++ b/erts/emulator/beam/erl_md5.c
@@ -172,7 +172,7 @@ void MD5Update (context, input, inputLen)
}
/*
- * MD5 finalization. Ends an MD5 message-digest operation, writing the
+ * MD5 finalization. Ends an MD5 message-digest operation, writing
the message digest and zeroizing the context.
*/
void MD5Final (digest, context)
diff --git a/erts/emulator/beam/erl_thr_queue.c b/erts/emulator/beam/erl_thr_queue.c
index aab7c199d2..37c99a0419 100644
--- a/erts/emulator/beam/erl_thr_queue.c
+++ b/erts/emulator/beam/erl_thr_queue.c
@@ -52,7 +52,7 @@
* deallocation. Memory allocation can be moved to another more suitable
* thread using erts_thr_q_prepare_enqueue() together with
* erts_thr_q_enqueue_prepared() instead of using erts_thr_q_enqueue().
- * Memory deallocation can can be moved to another more suitable thread by
+ * Memory deallocation can be moved to another more suitable thread by
* disabling auto_finalize_dequeue when initializing the queue and then use
* erts_thr_q_get_finalize_dequeue_data() together
* erts_thr_q_finalize_dequeue() after dequeuing or cleaning.
diff --git a/erts/emulator/beam/erl_trace.c b/erts/emulator/beam/erl_trace.c
index bb2e34a81b..25a7474cdf 100644
--- a/erts/emulator/beam/erl_trace.c
+++ b/erts/emulator/beam/erl_trace.c
@@ -1122,7 +1122,7 @@ erts_call_trace(Process* p, ErtsCodeInfo *info, Binary *match_spec,
* use process flags
*/
tracee_flags = &ERTS_TRACE_FLAGS(p);
- /* Is is not ideal at all to call this check twice,
+ /* It is not ideal at all to call this check twice,
it should be optimized so that only one call is made. */
if (!is_tracer_enabled(p, ERTS_PROC_LOCK_MAIN, &p->common, &tnif,
TRACE_FUN_ENABLED, am_trace_status)
@@ -1246,7 +1246,7 @@ erts_call_trace(Process* p, ErtsCodeInfo *info, Binary *match_spec,
ASSERT(!ERTS_TRACER_IS_NIL(*tracer));
/*
- * Build the the {M,F,A} tuple in the local heap.
+ * Build the {M,F,A} tuple in the local heap.
* (A is arguments or arity.)
*/
diff --git a/erts/emulator/drivers/common/inet_drv.c b/erts/emulator/drivers/common/inet_drv.c
index 04a1f70bf4..118c588780 100644
--- a/erts/emulator/drivers/common/inet_drv.c
+++ b/erts/emulator/drivers/common/inet_drv.c
@@ -10661,7 +10661,7 @@ static int tcp_inet_multi_timeout(ErlDrvData e, ErlDrvTermData caller)
** output on a socket only !
** a reply code will be sent to connected (caller later)
** {inet_reply, S, Status}
-** NOTE! normal sockets use the the tcp_inet_commandv
+** NOTE! normal sockets use the tcp_inet_commandv
** but distribution still uses the tcp_inet_command!!
*/
diff --git a/erts/emulator/pcre/pcre_compile.c b/erts/emulator/pcre/pcre_compile.c
index 80b966869a..94a7222e4d 100644
--- a/erts/emulator/pcre/pcre_compile.c
+++ b/erts/emulator/pcre/pcre_compile.c
@@ -4834,7 +4834,7 @@ for (;; ptr++)
If the class contains characters outside the 0-255 range, a different
opcode is compiled. It may optionally have a bit map for characters < 256,
- but those above are are explicitly listed afterwards. A flag byte tells
+ but those above are explicitly listed afterwards. A flag byte tells
whether the bitmap is present, and whether this is a negated class or not.
In JavaScript compatibility mode, an isolated ']' causes an error. In
@@ -5855,7 +5855,7 @@ for (;; ptr++)
/* If previous was a character type match (\d or similar), abolish it and
create a suitable repeat item. The code is shared with single-character
repeats by setting op_type to add a suitable offset into repeat_type. Note
- the the Unicode property types will be present only when SUPPORT_UCP is
+ the Unicode property types will be present only when SUPPORT_UCP is
defined, but we don't wrap the little bits of code here because it just
makes it horribly messy. */
diff --git a/erts/emulator/pcre/pcre_exec.c b/erts/emulator/pcre/pcre_exec.c
index e4da43e99f..bf7a9044ee 100644
--- a/erts/emulator/pcre/pcre_exec.c
+++ b/erts/emulator/pcre/pcre_exec.c
@@ -301,7 +301,7 @@ been known for decades.) So....
There is a fudge, triggered by defining NO_RECURSE, which avoids recursive
calls by keeping local variables that need to be preserved in blocks of memory
-obtained from malloc() instead instead of on the stack. Macros are used to
+obtained from malloc() instead of on the stack. Macros are used to
achieve this so that the actual code doesn't look very different to what it
always used to.
@@ -626,7 +626,7 @@ frame->Xoffset_top = offset_top;
frame->Xeptrb = eptrb;
frame->Xrdepth = rdepth;
-/* This is where control jumps back to to effect "recursion" */
+/* This is where control jumps back to effect "recursion" */
HEAP_RECURSE:
@@ -3213,7 +3213,7 @@ for (;;)
/* Match an extended character class. This opcode is encountered only
- when UTF-8 mode mode is supported. Nevertheless, we may not be in UTF-8
+ when UTF-8 mode is supported. Nevertheless, we may not be in UTF-8
mode, because Unicode properties are supported in non-UTF-8 mode. */
#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
@@ -7371,7 +7371,7 @@ for(;;)
break;
}
- /* If req_char is set, we know that that character must appear in the
+ /* If req_char is set, we know that character must appear in the
subject for the match to succeed. If the first character is set, req_char
must be later in the subject; otherwise the test starts at the match point.
This optimization can save a huge amount of backtracking in patterns with
diff --git a/erts/emulator/pcre/pcre_valid_utf8.c b/erts/emulator/pcre/pcre_valid_utf8.c
index 1dc1f9ba0c..95a60c3fdb 100644
--- a/erts/emulator/pcre/pcre_valid_utf8.c
+++ b/erts/emulator/pcre/pcre_valid_utf8.c
@@ -219,7 +219,7 @@ for (p = string; length-- > 0; p++)
switch (ab)
{
/* 2-byte character. No further bytes to check for 0x80. Check first byte
- for for xx00 000x (overlong sequence). */
+ for xx00 000x (overlong sequence). */
case 1: if ((c & 0x3e) == 0)
{
@@ -251,7 +251,7 @@ for (p = string; length-- > 0; p++)
break;
/* 4-byte character. Check 3rd and 4th bytes for 0x80. Then check first 2
- bytes for for 1111 0000, xx00 xxxx (overlong sequence), then check for a
+ bytes for 1111 0000, xx00 xxxx (overlong sequence), then check for a
character greater than 0x0010ffff (f4 8f bf bf) */
case 3:
diff --git a/erts/emulator/hipe/hipe_x86_signal.c b/erts/emulator/hipe/hipe_x86_signal.c
index f4731a5034..772041d74d 100644
--- a/erts/emulator/hipe/hipe_x86_signal.c
+++ b/erts/emulator/hipe/hipe_x86_signal.c
@@ -97,7 +97,7 @@
* Assumes Mac OS X >= 10.3 (dlsym operations not available in 10.2 and
* earlier).
*
- * The code below assumes that is is part of the main image (earlier
+ * The code below assumes that is part of the main image (earlier
* in the load order than libSystem and certainly before any dylib
* that might use sigaction) -- a standard RTLD_NEXT caveat.
*
diff --git a/erts/emulator/sys/win32/sys.c b/erts/emulator/sys/win32/sys.c
index b006908f09..63eb35a7c4 100644
--- a/erts/emulator/sys/win32/sys.c
+++ b/erts/emulator/sys/win32/sys.c
@@ -708,7 +708,7 @@ release_driver_data(DriverData* dp)
requests issued by another thread and that we can't use
CancelIoEx as that's only available in Vista etc.
R14: Avoid scheduler deadlock by only wait for 10ms, and then spawn
- a thread that will keep waiting in in order to close handles. */
+ a thread that will keep waiting in order to close handles. */
HANDLE handles[2];
int i = 0;
int timeout = 10;
@@ -1526,7 +1526,7 @@ create_child_process
wchar_t *wd, /* Working dir for the child */
unsigned st, /* Flags for spawn, tells us how to interpret origcmd */
wchar_t **argv, /* Argument vector if given. */
- int *errno_return /* Place to put an errno in in case of failure */
+ int *errno_return /* Place to put an errno in case of failure */
)
{
PROCESS_INFORMATION piProcInfo = {0};
diff --git a/erts/emulator/zlib/inftrees.c b/erts/emulator/zlib/inftrees.c
index 2ea08fc13e..80e27a489e 100644
--- a/erts/emulator/zlib/inftrees.c
+++ b/erts/emulator/zlib/inftrees.c
@@ -87,7 +87,7 @@ unsigned short FAR *work;
This routine assumes, but does not check, that all of the entries in
lens[] are in the range 0..MAXBITS. The caller must assure this.
- 1..MAXBITS is interpreted as that code length. zero means that that
+ 1..MAXBITS is interpreted as that code length. zero means that
symbol does not occur in this code.
The codes are sorted by computing a count of codes for each length,
diff --git a/erts/epmd/src/epmd_srv.c b/erts/epmd/src/epmd_srv.c
index 96d9d088b7..c414e156fb 100644
--- a/erts/epmd/src/epmd_srv.c
+++ b/erts/epmd/src/epmd_srv.c
@@ -543,7 +543,7 @@ void run(EpmdVars *g)
/*
* The accept() succeeded, and we have at least one file
* descriptor still free, which means that another accept()
- * could succeed. Go do do another select(), in case there
+ * could succeed. Go do another select(), in case there
* are more incoming connections waiting to be accepted.
*/
goto select_again;
diff --git a/erts/lib_src/common/ethr_mutex.c b/erts/lib_src/common/ethr_mutex.c
index 2bb5f76b78..b3fe4a310a 100644
--- a/erts/lib_src/common/ethr_mutex.c
+++ b/erts/lib_src/common/ethr_mutex.c
@@ -884,7 +884,7 @@ enqueue_mtx(ethr_mutex *mtx, ethr_ts_event *tse_start, ethr_ts_event *tse_end)
* is not currently locked by current thread, we almost certainly have a
* hard to debug race condition. There might however be some (strange)
* use for it. POSIX also allow a call to `pthread_cond_signal' or
- * `pthread_cond_broadcast' even though the the associated mutex isn't
+ * `pthread_cond_broadcast' even though the associated mutex isn't
* locked by the caller. Therefore, we also allow this kind of strange
* usage, but optimize for the case where the mutex is locked by the
* calling thread.
diff --git a/lib/erl_interface/src/decode/decode_fun.c b/lib/erl_interface/src/decode/decode_fun.c
index 3622ebbe02..cad8ba9bfb 100644
--- a/lib/erl_interface/src/decode/decode_fun.c
+++ b/lib/erl_interface/src/decode/decode_fun.c
@@ -120,7 +120,7 @@ int ei_decode_fun(const char *buf, int *index, erlang_fun *p)
/* then the old_uniq */
if (ei_decode_long(s, &ix, p_uniq) < 0)
return -1;
- /* the the pid */
+ /* the pid */
if (ei_decode_pid(s, &ix, p_pid) < 0)
return -1;
/* finally the free vars */
diff --git a/lib/erl_interface/src/misc/eimd5.c b/lib/erl_interface/src/misc/eimd5.c
index 426b96d962..3d7dd960e7 100644
--- a/lib/erl_interface/src/misc/eimd5.c
+++ b/lib/erl_interface/src/misc/eimd5.c
@@ -161,7 +161,7 @@ void ei_MD5Update (MD5_CTX *context, unsigned char *input,
}
/*
- * MD5 finalization. Ends an MD5 message-digest operation, writing the
+ * MD5 finalization. Ends an MD5 message-digest operation, writing
the message digest and zeroizing the context.
*/
void ei_MD5Final (unsigned char digest[16], MD5_CTX *context)
--
2.34.1
