File 0187-Simplify-configuration-of-cross-compiling-to-Android.patch of Package erlang
From da31dbea71ff2f50839e96bc6e6d11327bb868f8 Mon Sep 17 00:00:00 2001 From: "Paulo F. Oliveira" <paulo.ferraz.oliveira@gmail.com> Date: Fri, 8 Jan 2021 21:59:55 +0000 Subject: [PATCH] Simplify configuration of cross-compiling to Android x86_64 --- xcomp/erl-xcomp-x86_64-android.conf | 280 ++++++++++++++++++++++++++++ 1 file changed, 280 insertions(+) create mode 100644 xcomp/erl-xcomp-x86_64-android.conf diff --git a/xcomp/erl-xcomp-x86_64-android.conf b/xcomp/erl-xcomp-x86_64-android.conf new file mode 100644 index 0000000000..6c9747353d --- /dev/null +++ b/xcomp/erl-xcomp-x86_64-android.conf @@ -0,0 +1,280 @@ +## -*-shell-script-*- +## +## %CopyrightBegin% +## +## Copyright Ericsson AB 2021. All Rights Reserved. +## +## Licensed under the Apache License, Version 2.0 (the "License"); +## you may not use this file except in compliance with the License. +## You may obtain a copy of the License at +## +## http://www.apache.org/licenses/LICENSE-2.0 +## +## Unless required by applicable law or agreed to in writing, software +## distributed under the License is distributed on an "AS IS" BASIS, +## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +## See the License for the specific language governing permissions and +## limitations under the License. +## +## %CopyrightEnd% +## +## File: erl-xcomp-x86_64-android.conf +## Author: Paulo Oliveira +## +## ----------------------------------------------------------------------------- +## When cross compiling Erlang/OTP using `otp_build', copy this file and set +## the variables needed below. Then pass the path to the copy of this file as +## an argument to `otp_build' in the configure stage: +## `otp_build configure --xcomp-conf=<FILE>' +## ----------------------------------------------------------------------------- + +## Note that you cannot define arbitrary variables in a cross compilation +## configuration file. Only the ones listed below will be guaranteed to be +## visible throughout the whole execution of all `configure' scripts. Other +## variables needs to be defined as arguments to `configure' or exported in +## the environment. + +## -- Variables for `otp_build' Only ------------------------------------------- + +## Variables in this section are only used, when configuring Erlang/OTP for +## cross compilation using `$ERL_TOP/otp_build configure'. + +## *NOTE*! These variables currently have *no* effect if you configure using +## the `configure' script directly. + +# * `erl_xcomp_build' - The build system used. This value will be passed as +# `--build=$erl_xcomp_build' argument to the `configure' script. It does +# not have to be a full `CPU-VENDOR-OS' triplet, but can be. The full +# `CPU-VENDOR-OS' triplet will be created by +# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build'. If set to `guess', +# the build system will be guessed using +# `$ERL_TOP/erts/autoconf/config.guess'. +erl_xcomp_build=guess + +# * `erl_xcomp_host' - Cross host/target system to build for. This value will +# be passed as `--host=$erl_xcomp_host' argument to the `configure' script. +# It does not have to be a full `CPU-VENDOR-OS' triplet, but can be. The +# full `CPU-VENDOR-OS' triplet will be created by +# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host'. +erl_xcomp_host=x86_64-linux-android + +# * `erl_xcomp_configure_flags' - Extra configure flags to pass to the +# `configure' script. +erl_xcomp_configure_flags="--disable-hipe --without-termcap --without-wx \ + --enable-builtin-zlib" + +## -- Cross Compiler and Other Tools ------------------------------------------- + +## If the cross compilation tools are prefixed by `<HOST>-' you probably do +## not need to set these variables (where `<HOST>' is what has been passed as +## `--host=<HOST>' argument to `configure'). + +## All variables in this section can also be used when native compiling. + +# * `CC' - C compiler. +CC=x86_64-linux-$NDK_ABI_PLAT-clang + +# * `CFLAGS' - C compiler flags. +#CFLAGS= + +# * `STATIC_CFLAGS' - Static C compiler flags. +#STATIC_CFLAGS= + +# * `CFLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library +# search path for the shared libraries. Note that this actually is a +# linker flag, but it needs to be passed via the compiler. +#CFLAG_RUNTIME_LIBRARY_PATH= + +# * `CPP' - C pre-processor. +#CPP= + +# * `CPPFLAGS' - C pre-processor flags. +#CPPFLAGS= + +# * `CXX' - C++ compiler. +CXX=x86_64-linux-$NDK_ABI_PLAT-clang++ + +# * `CXXFLAGS' - C++ compiler flags. +#CXXFLAGS= + +# * `LD' - Linker. +LD=x86_64-linux-android-ld.gold + +# * `LDFLAGS' - Linker flags. +#LDFLAGS= + +# * `LIBS' - Libraries. +#LIBS= + +## -- *D*ynamic *E*rlang *D*river Linking -- + +## *NOTE*! Either set all or none of the `DED_LD*' variables. + +# * `DED_LD' - Linker for Dynamically loaded Erlang Drivers. +#DED_LD= + +# * `DED_LDFLAGS' - Linker flags to use with `DED_LD'. +#DED_LDFLAGS= + +# * `DED_LD_FLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library +# search path for shared libraries when linking with `DED_LD'. +#DED_LD_FLAG_RUNTIME_LIBRARY_PATH= + +## -- Large File Support -- + +## *NOTE*! Either set all or none of the `LFS_*' variables. + +# * `LFS_CFLAGS' - Large file support C compiler flags. +#LFS_CFLAGS= + +# * `LFS_LDFLAGS' - Large file support linker flags. +#LFS_LDFLAGS= + +# * `LFS_LIBS' - Large file support libraries. +#LFS_LIBS= + +## -- Other Tools -- + +# * `RANLIB' - `ranlib' archive index tool. +#RANLIB= + +# * `AR' - `ar' archiving tool. +#AR= + +# * `GETCONF' - `getconf' system configuration inspection tool. `getconf' is +# currently used for finding out large file support flags to use, and +# on Linux systems for finding out if we have an NPTL thread library or +# not. +#GETCONF= + +## -- Cross System Root Locations ---------------------------------------------- + +# * `erl_xcomp_sysroot' - The absolute path to the system root of the cross +# compilation environment. Currently, the `crypto', `odbc', `ssh' and +# `ssl' applications need the system root. These applications will be +# skipped if the system root has not been set. The system root might be +# needed for other things too. If this is the case and the system root +# has not been set, `configure' will fail and request you to set it. +erl_xcomp_sysroot="$NDK_ROOT/sys_root" + +# * `erl_xcomp_isysroot' - The absolute path to the system root for includes +# of the cross compilation environment. If not set, this value defaults +# to `$erl_xcomp_sysroot', i.e., only set this value if the include system +# root path is not the same as the system root path. +#erl_xcomp_isysroot= + +## -- Optional Feature, and Bug Tests ------------------------------------------ + +## These tests cannot (always) be done automatically when cross compiling. You +## usually do not need to set these variables. Only set these if you really +## know what you are doing. + +## Note that some of these values will override results of tests performed +## by `configure', and some will not be used until `configure' is sure that +## it cannot figure the result out. + +## The `configure' script will issue a warning when a default value is used. +## When a variable has been set, no warning will be issued. + +# * `erl_xcomp_after_morecore_hook' - `yes|no'. Defaults to `no'. If `yes', +# the target system must have a working `__after_morecore_hook' that can be +# used for tracking used `malloc()' implementations core memory usage. +# This is currently only used by unsupported features. +#erl_xcomp_after_morecore_hook= + +# * `erl_xcomp_bigendian' - `yes|no'. No default. If `yes', the target system +# must be big endian. If `no', little endian. This can often be +# automatically detected, but not always. If not automatically detected, +# `configure' will fail unless this variable is set. Since no default +# value is used, `configure' will try to figure this out automatically. +#erl_xcomp_bigendian= + +# * `erl_xcomp_double_middle` - `yes|no`. No default. If `yes`, the +# target system must have doubles in "middle-endian" format. If +# `no`, it has "regular" endianness. This can often be automatically +# detected, but not always. If not automatically detected, +# `configure` will fail unless this variable is set. Since no +# default value is used, `configure` will try to figure this out +# automatically. +#erl_xcomp_double_middle_endian + +# * `erl_xcomp_clock_gettime_cpu_time' - `yes|no'. Defaults to `no'. If `yes', +# the target system must have a working `clock_gettime()' implementation +# that can be used for retrieving process CPU time. +#erl_xcomp_clock_gettime_cpu_time= + +# * `erl_xcomp_getaddrinfo' - `yes|no'. Defaults to `no'. If `yes', the target +# system must have a working `getaddrinfo()' implementation that can +# handle both IPv4 and IPv6. +#erl_xcomp_getaddrinfo= + +# * `erl_xcomp_gethrvtime_procfs_ioctl' - `yes|no'. Defaults to `no'. If `yes', +# the target system must have a working `gethrvtime()' implementation and +# is used with procfs `ioctl()'. +#erl_xcomp_gethrvtime_procfs_ioctl= + +# * `erl_xcomp_dlsym_brk_wrappers' - `yes|no'. Defaults to `no'. If `yes', the +# target system must have a working `dlsym(RTLD_NEXT, <S>)' implementation +# that can be used on `brk' and `sbrk' symbols used by the `malloc()' +# implementation in use, and by this track the `malloc()' implementations +# core memory usage. This is currently only used by unsupported features. +#erl_xcomp_dlsym_brk_wrappers= + +# * `erl_xcomp_kqueue' - `yes|no'. Defaults to `no'. If `yes', the target +# system must have a working `kqueue()' implementation that returns a file +# descriptor which can be used by `poll()' and/or `select()'. If `no' and +# the target system has not got `epoll()' or `/dev/poll', the kernel-poll +# feature will be disabled. +#erl_xcomp_kqueue= + +# * `erl_xcomp_linux_clock_gettime_correction' - `yes|no'. Defaults to `yes' on +# Linux; otherwise, `no'. If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on +# the target system must work. This variable is recommended to be set to +# `no' on Linux systems with kernel versions less than 2.6. +#erl_xcomp_linux_clock_gettime_correction= + +# * `erl_xcomp_linux_nptl' - `yes|no'. Defaults to `yes' on Linux; otherwise, +# `no'. If `yes', the target system must have NPTL (Native POSIX Thread +# Library). Older Linux systems have LinuxThreads instead of NPTL (Linux +# kernel versions typically less than 2.6). +#erl_xcomp_linux_nptl= + +# * `erl_xcomp_linux_usable_sigaltstack' - `yes|no'. Defaults to `yes' on Linux; +# otherwise, `no'. If `yes', `sigaltstack()' must be usable on the target +# system. `sigaltstack()' on Linux kernel versions less than 2.4 are +# broken. +#erl_xcomp_linux_usable_sigaltstack= + +# * `erl_xcomp_linux_usable_sigusrx' - `yes|no'. Defaults to `yes'. If `yes', +# the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. Old +# LinuxThreads thread libraries (Linux kernel versions typically less than +# 2.2) used these signals and made them unusable by the ERTS. +#erl_xcomp_linux_usable_sigusrx= + +# * `erl_xcomp_poll' - `yes|no'. Defaults to `no' on Darwin/MacOSX; otherwise, +# `yes'. If `yes', the target system must have a working `poll()' +# implementation that also can handle devices. If `no', `select()' will be +# used instead of `poll()'. +#erl_xcomp_poll= + +# * `erl_xcomp_putenv_copy' - `yes|no'. Defaults to `no'. If `yes', the target +# system must have a `putenv()' implementation that stores a copy of the +# key/value pair. +#erl_xcomp_putenv_copy= + +# * `erl_xcomp_reliable_fpe' - `yes|no'. Defaults to `no'. If `yes', the target +# system must have reliable floating point exceptions. +#erl_xcomp_reliable_fpe= + +# * `erl_xcomp_posix_memalign' - `yes|no'. Defaults to `yes' if `posix_memalign' +# system call exists; otherwise `no'. If `yes', the target system must have a +# `posix_memalign' implementation that accepts larger than page size +# alignment. +#erl_xcomp_posix_memalign= + +# * `erl_xcomp_code_model_small` - `yes|no`. Default to `no`. If `yes`, the target +# system must place the beam.smp executable in the lower 2 GB of memory. That is it +# should not use position independent executable. +#erl_xcomp_code_model_small= + +## ----------------------------------------------------------------------------- -- 2.26.2
