File rubygem-metric_fu.changes of Package rubygem-metric_fu
-------------------------------------------------------------------
Fri Sep 25 14:17:01 UTC 2020 - Stephan Kulow <coolo@suse.com>
updated to version 4.13.0
see installed HISTORY.md
-------------------------------------------------------------------
Fri Jun 19 04:31:01 UTC 2015 - coolo@suse.com
- updated to version 4.12.0
see installed HISTORY.md
-------------------------------------------------------------------
Fri Feb 27 05:29:51 UTC 2015 - coolo@suse.com
- updated to version 4.11.4
-------------------------------------------------------------------
Tue Feb 10 18:03:58 UTC 2015 - coolo@suse.com
- updated to version 4.11.3
-------------------------------------------------------------------
Mon Oct 13 14:22:39 UTC 2014 - coolo@suse.com
- adapt to new rubygem packaging
-------------------------------------------------------------------
Sun May 18 09:04:34 UTC 2014 - coolo@suse.com
- updated to version 4.11.1
* Fixes
* Captured shell-output now only includes STDOUT. Appending STDERR was breaking expectations. (Benjamin Fleischer, #230, fixes #229)
### [4.11.0](https://github.com/metricfu/metric_fu/compare/v4.10.0...v4.11.0)
* Features
* There is now a `MetricFu.logger` with standard available configurations.
The old `mf_debug` and `mf_log` main mixin is presevered. Needs documentation. See #113. (Benjamin Fleischer, a49bfdd182)
* Use *launchy* (new dependency) when opening output files. (Nick Veys, #224)
* Coverage formatter now behaves like SimpleCov; it ignores certain lines in
calculating the precent run. Fixes #153, #222 (Benjamin Fleischer, #226).
- Thanks to @crv for the test in #153
- Note: JRuby will usually report different Coverage from MRI. This is a known issue.
- Note: This technically is a *breaking change* from how RCov works. But wwe don't run RCov anymore. (65bf21723291f)
* Fixes
* Ensure paths with spaces don't cause the open command to fail (Nick Veys, #220)
* Read in source files for annotation in BINARY mode to avoid encoding errors. (Benjamin Fleischer, #216)
* Start SimpleCov before any MetricFu code is loaded. Coverage isn't tracked on already-loaded code. (Benjamin Fleischer, cca659f7d48d3f6799)
* Remove unused/invalid Flay param 'filetypes'. Closes #151. (Benjamin Fleischer, 5973595f51c)
* Misc
* Document ENV variables the may fix encoding exceptions. (Mike Szyndel, #217)
* Begin adding shared tests for metrics and configuration. Test fenced-codeblock matching. (Benjamin Fleischer, #221)
* Reorganize the application file layout. Still more to be done. (Benjamin Fleischer, #223)
* Rename AwesomeTemplate to MetricFu::Templates::MetricsTemplate. (Benjamin Fleischer, 55c52afd95d78)
* Rename ReekHotspot to MetricFu::ReekHotspot. Was missing namespace. (Benjamin Fleischer, a3aa70c1a9)
* Allow failures for Ruby 2.1, in addition to rbx per issues with rvm. (Benjamin Fleischer, 3018b22)
* `spec/quality_spec.rb` checks for whitespace, tabs, quotes, etc. `rake spec` also checks for warnings. (Benjamin Fleischer, b0c51bb9b17)
* When run with COVERAGE=true, will ouptut a file to `coverage/coverage_percent.txt` that can be checked via `rake check_code_coverage`. Borrowed from VCR. (Benjamin Fleischer, 32df3a34c6)
-------------------------------------------------------------------
Sat Mar 15 18:46:00 UTC 2014 - coolo@suse.com
- updated to version 4.8.0
* Features
* Add configurable `MetricFu.report_name`. (Paul Swagerty, #203)
### [4.7.4 / 2014-02-16](https://github.com/metricfu/metric_fu/compare/v4.7.3...v4.7.4)
* Fixes
* Reek no longer crashes when reporting no warnings (Michael Stark, #199)
* Prevent Roodi non-metric output from ending up in the results (Martin Gotink #202)
* Coverage file is only read in when the specified external file exists. (Benjamin Fleischer, #156)
* Metrics are configured to default values before the user config is loaded (Benjamin Fleischer, #156, #78)
### [4.7.3 / 2014-02-09](https://github.com/metricfu/metric_fu/compare/v4.7.2...v4.7.3)
* Fixes
* Add `strip_escape_codes`; remove from Roodi output. (Przemysław Dąbek, #197)
* Misc
* Fix markdown in README. (Guilherme Simões, #198)
* Add Ruby 2.1 to Travis CI build. (Michael Stark , #200)
-------------------------------------------------------------------
Thu Feb 6 18:00:02 UTC 2014 - coolo@suse.com
- updated to version 4.7.2
* Fixes
* Open Saikuro scratch files in BINARY; fixes #190. (Benjamin Fleischer, #195)
* Update to churn 0.0.35 for API compatibility. (Przemysław Dąbek, #193)
* Only specify reek config when set; disable line numbers. (Benjamin Fleischer, #196)
-------------------------------------------------------------------
Mon Jan 20 09:29:44 UTC 2014 - coolo@suse.com
- updated to version 4.7.1
* Features
* Move to using churn library and allowing all churn options to be passed through to churn library. (Dan Mayer, #182)
* Create template for syntax highlighting in report. (Benjamin Fleischer, #179)
* Gem deps now derirved from gemspec via regex (from Gemnasium). Related to #184.
`--debug-info` will now show the version of the activated gem, if available. (Benjamin Fleischer, #189)
* Fixes
* Force gemspec to use utf-8 encoding when importing the AUTHORS file. (Paul Swagerty, #183)
* Ensure gemspec doesn't crash when reading in AUTHORS file. (saltracer, #184)
* Fix bad parsing of reek output. (Greg Allen, #185)
* Misc
* Spelling correction. (mdb, #177)
* Clean up README indentation. (simi, #187)
* Tests run faster. (Benjamin Fleischer, #181)
* Simplify load paths. (Benjamin Fleicher, #139)
* Update to RSpec 3.0.0.beta1. (Benjamin Fleischer)
* Update to new release of TestConstruct. (Benjamin Fleischer)
-------------------------------------------------------------------
Fri Nov 22 08:40:32 UTC 2013 - coolo@suse.com
- updated to version 4.6.0
* Features
* Allow configuration of the generation template, eg link_prefix (Adrien Montfort, #171)
* Fixes
* Return 0% coverage when the file has no lines. (Chirag Viradiya #152, Benjamin Fleischer, Michael Foley)
* Return stats code to test ratio of 0.0 when NaN (Benjamin Fleischer, reported by Greg Allen)
* Misc
### MetricFu [4.5.2 / 2013-11-07](https://github.com/metricfu/metric_fu/compare/v4.4.4...v4.5.2)
* Misc
* Exclude etc dir from built gem; save 1.1MB by not including erd.png. (Benjamin Fleischer, #173)
### MetricFu [4.5.1 / 2013-11-07](https://github.com/metricfu/metric_fu/compare/v4.4.4...v4.5.1)
* Features
* Fixes
* Misc
* Releasing the signed gem didn't work. See ed2f96d8
### MetricFu [4.5.0 / 2013-11-07](https://github.com/metricfu/metric_fu/compare/v4.4.4...v4.5.0)
* Features
* Signed gem; added certs/bf4.pem
* Run metrics without shelling out; use Open3.popen3 (Benjamin Fleischer, #157)
- GemRun runs external libraries, outputs nice error messages
- GemVersion returns version requirements for a gem dependency; replaces metric_fu_requires
- Consolidate code that runs external metrics to the generator
- `--debug-info` now outputs metric dependencies
* Add new MetricFu.run_dir that defaults to Pathname.pwd, but can be set (Benjamin Fleischer, #160)
- Used in dummy app for testing 9fcc085
* User config (.metrics) now loaded when metric_fu required (Benjamin Fleischer, #158)
* Consolidate grapher code; remove gchart grapher (Benjamin Fleischer, 5fd8f4)
- Remove bluff gem; bluff grapher is a js library. (Benjamin Fleischer, 8b534c7)
* Better rake tasks: can set options form the task (Benjamin Fleischer, 11ac27)
- Add ::run(options) and ::run_only(metric_name) to MetricFu namespace
* Fixes
* Churn hotspot no longer tries to read directories as if they were files (Adrien Montfort, #169)
* Set default Reek config to config/*.reek, per Reek docs (Benjamin Fleischer, #165)
- Ensure .reek still loaded, for backwards-compatibility
* Bump reek patch version due to change in meaning in reek config (Benjamin Fleischer, #166)
* Cleanup scratch files Saikuro leaves behind; else they are re-used! (Benjamin Fleischer, 91ac9af)
* Various IO-related fixes
- Close read pipe when capturing output, per @eclubb, Earle Clubb (6696d42)
- Stop leaving files open everywhere, even though 'everyone does it'. (Benjamin Fleischer, #159)
- Isolate file-system interactions in specs; rbx specs can pass (Benjamin Fleischer, #161)
* Remove unused before/after generator methods; standardize not_implemented message (Benjamin Fleischer, 5842d83)
* Misc
* Update README, and how to contribute (Benjamin Fleischer, #114)
* Set sane defaults for generator per_file_data hash (Benjamin Fleischer, d991fb8)
* Ensure gemspec reads AUTHORS from relative path (Benjamin Fleischer, ee0274f)
* Configure SimpleCov to run with the html and rcov text formatters (Benjamin Fleischer, d372d00)
* Extract CLI option parsing methods (Benjamin Fleischer, a54d018)
* Test improvements
- Update setup, add pry (Benjamin Fleischer)
- Add rspec FAIL_FAST option (bd2745a)
- Update spec_helper, add filters, defer gc (3db59d7)
- Configure tests not to manage GC under JRuby (000200b)
- Remove FakeFS; doesn't seem to be speeding up the tests, but it does break them (afc5518)
- Cache test fixtures. (And rename from resources to fixtures.) (Benjamin Fleischer, #164)
- Set timeout on each test (Benjamin Fleischer, f1d5f20)
-------------------------------------------------------------------
Thu Oct 10 14:20:47 UTC 2013 - coolo@suse.com
- updated to version 4.4.4
* Features
* Fixes
* Update rcov config instructions in README to include call to activate (Carlos Fernandez, #145)
* rcov hotspot analyzer (MetricFu::RcovHotspot) now overrides map_strategy instead of map (Carlos Fernandez, #145)
* Fix test failures relating to artifact directory missing (Benjamin Fleischer, #144)
* Misc
### MetricFu [4.4.3 / 2013-09-25](https://github.com/metricfu/metric_fu/compare/v4.4.2...v4.4.3)
* Features
* Fixes
* Scratch directory no longer dependent on generator class name. Saikuro works again! (Benjamin Fleischer, #141)
* Misc
* Metric scratch directory now set via Metric `run_options[:output_directory] || MetricFu::Io::FileSystem.scratch_directory(metric)` (Benjamin Fleischer, #141)
### MetricFu [4.4.2 / 2013-09-25](https://github.com/metricfu/metric_fu/compare/v4.4.1...v4.4.2)
* Features
* Add --debug-info command line switch to get debug info for Issues. (calveto, #118)
* Fixes
* Return valid line locations for code with either no AST or nil nodes (Benjamin Fleischer, #137)
* Only use FakeFS on MRI. Avoid intermittent failures on JRuby or Rubinius (Benjamin Fleischer, #135)
* Hotspots no longer serialize actual classes to YAML. (Benjamin Fleischer, #128)
* Misc
* Extract SexpNode class from LineNumbers to handle Sexp Processing (Benjamin Fleischer, #137)
* Separate out Hotspot ranked problem location and misc code improvements (Benjamin Fleischer, #128)
* Identify directories with code to analyze by checking if they exist. (No longer use :rails? as a proxy for checking if we should run on 'app'). (George Erickson, #129)
-------------------------------------------------------------------
Tue Sep 3 08:10:06 UTC 2013 - coolo@suse.com
- updated to version 4.4.1
-------------------------------------------------------------------
Mon Aug 26 05:05:52 UTC 2013 - coolo@suse.com
- updated to version 4.4.0
* Features
* Metrics now configure themselves in a subclass of MetricFu::Metric ( Benjamin Fleischer / Robin Curry #91, #111)
* Metrics can be configured individually via Metric.configuration.configure_metric(:some_metric) or Metric.configuration.configure_metrics {|metric| }. See .metrics file for examples ( Benjamin Fleischer / Robin Curry #91, #111)
* Distinguish between an activated metric library and an enabled metric.
* An enabled metric will be run.
* An activated metric has had its library successfully required. (Benjamin Fleischer #125)
* Code Statistics metrics always runs now, relies on the code_metrics gem extracted from Rails. Does not shell out. ( Benjamin Fleischer, #108 )
* Rails Best Practices report now provides a link to the description and solution of the problem (Calveto #117)
* Rails Best Practices now runs as a library. It is no longer shelled out. (Calveto #117)
* Update flog to ~> 4.1.1, this is needed to use keyword parameters in ruby 2. (George Erickson, #122)
* Fixes
* Skip reek when no files are found to run against. Otherwise, reek hangs trying to read from STDIN (Benjamin Fleischer, #119, #121)
* Reek will now find files on Windows. Remove *nix-specific '/' directory separators from Reek file glob. (Benjamin Fleischer, #119, #121)
* Link to correct reek url on report. (Calveto #116)
* Hack to accomodate Rails Best Practices dependency Code Analyzer monkey patch of Sexp (Benjamin Fleischer #123, #124)
* Misc
* Moved environmental concerns into an Environment module ( Benjamin Fleischer / Robin Curry #91, #111)
* Exposed RubyParser patch ( Benjamin Fleischer / Robin Curry #91, #111)
* Separated out io / filesystem /templating concerns into their own classes or modules. Thus, we removed all the metaprogrammatically defined methods and instance variables.( Benjamin Fleischer / Robin Curry #91, #111, #112, #115)
* Generator subclasses can now be found by metric name. MetricFu::Generator.get_generator(:flog) (Benjamin Fleischer, #126)
* Breaking change related to the above: removed configuration methods / MetricFu module methods: add_graph, add_metric, configure_graph, configure_metric, configure_graph_engine, graph_engine, metrics, formatters, graphs, graph_engines, rails?, code_dirs, base_directory, scratch_directory, output_directory, data_directory, file_globs_to_ignore, metric_fu_root_directory, template_directory, template_class, link_prefix, darwin_txmt_protocol_no_thanks, syntax_highlighting
-------------------------------------------------------------------
Tue Aug 6 17:45:16 UTC 2013 - coolo@suse.com
- updated to version 4.3.1
-------------------------------------------------------------------
Tue Jul 30 18:46:50 UTC 2013 - coolo@suse.com
- updated to version 4.3.0
-------------------------------------------------------------------
Fri Dec 9 11:56:34 UTC 2011 - saschpe@suse.de
- Update to version 2.1.1:
* Making syntax highlighting optional so Ruby 1.9.2 users don't
get "invalid byte sequence in UTF-8" errors.
- Changes from version 2.1.0:
* Flog gemspec version was >= 2.2.0, which was too early and
didn't work. Changed to >= 2.3.0
* RCov generator now uses a regex with begin and end line anchor
to avoid splitting on comments with equal signs in source files
* RCov generator now always strips the 3 leading characters from
the lines when reconstruction source files so that heredocs and
block comments parse successfully
* Dan Mayer ported some specs for the Hotspots code into MetricFu
from Caliper's code.
* Stefan Huber fixed some problems with churn pretending not to
support Svn.
* Kakutani Shintaro added the ability to opt out of opening files
with TextMate (config.darwin_txmt_protocol_no_thanks = true).
* Joel Nimety and Andrew Selder fixed a problem where Saikuro was
parsing a dir twice.
* Dan Sinclair added a verbose mode (config.verbose = true).
-------------------------------------------------------------------
Tue Jun 22 17:27:07 UTC 2010 - mrueckert@suse.de
- update to version 1.4.0
- Added support for rails_best_practices gem - Richard Huang
- Added rails stats graphing -- Josh Cronemeyer
- Parameterize the filetypes for flay. By default flay supports
haml as well as rb and has a plugin ability for other
filetypes. - bfabry
- Support for Flog 2.4.0 line numbers - Dan Mayer
- Saikuro multi input directory patch - Spencer Dillard and Dan
Mayer
- Can now parse rcov analysis file coming from multiple sources
with an rcov :external option in the config. - Tarsoly András
- Fixed open file handles problem in the Saikuro analyzer -
aselder, erebor
- Fix some problems with the google charts - Chris Griego
- Stop showing the googlecharts warning if you are not using
google charts.
-------------------------------------------------------------------
Fri Jun 11 10:00:01 UTC 2010 - mrueckert@suse.de
- use rubygems_requires macro
-------------------------------------------------------------------
Mon Mar 1 13:26:17 UTC 2010 - prusnak@suse.cz
- created package
