File gscan2pdf.changes of Package gscan2pdf
-------------------------------------------------------------------
Sat Apr 11 06:36:55 UTC 2020 - simmphonie@opensuse.org
- Updated to version 2.6.7 (08.04.2020):
+ Fix bug causing stretched images after cropping.
+ Don't allow errors without page numbers to hang GUI.
+ Fixed bug importing multipage DjVu.
+ Fixed bug reloading options after setting manual paper size.
- Version 2.6.6 (06.04.2020):
+ Support importing PDF with different resolutions in x and y directions.
+ Fix bug applying paper after option set SANE_INFO_INEXACT
Closes bug #348 (paper size selection has no effect for US Letter / US Legal)
+ Update to Bulgarian translation (thanks to Berov)
+ Update to Turkish translation (thanks to Utku BERBEROĞLU)
- Version 2.6.5 (06.03.2020):
+ Fixed bug when editing page number causing page to deselect and thumbnails to
scroll to top of list
+ Use a scrolled window in the multiple message dialog to prevent it from
growing too large.
+ Use the "Don't show these messages again" checkbox to switch the checkboxes
for the individual messages. Set the button inconsistent if the states are not
all the same.
+ Fix warning message about pdftk (again) by making sure that user-defined tmp
directory is available in time.
+ Improve responsiveness with OCR output (again). Closes bug #192 (Sometimes
after saving a PDF, the page selection UI becomes sluggish/unresponsive)
+ Select # pages = all when switching from reverse->facing.
Closes bug #344 (# Pages in Scan Document dialog reverts to # from All)
+ Show "waiting" cursor for longer to prevent scans from being started before
all options applied.
+ Respect 'Use timezone from locale' option when setting file system timestamp
+ Update to Hungarian translation (thanks to csola)
+ Update to German translation (thanks to Martin Butter)
+ Update to Spanish translation (thanks to rodroes)
+ Update to Ukrainian translation (thanks to Yuri Chornoivan)
-------------------------------------------------------------------
Mon Mar 2 09:27:18 UTC 2020 - Tomáš Chvátal <tchvatal@suse.com>
- Format with spec-cleaner
- Remove recommends on lang subpkg, it is now handled by supplements
-------------------------------------------------------------------
Sun Mar 1 14:08:47 UTC 2020 - malcolmlewis@opensuse.org
- Updated to version 2.6.4:
+ Limit the number of pages to scan when switching between
scanning facing and reverse pages.
+ Fix scan dialog if no devices found (again).
+ Improve responsiveness with OCR output.
+ Add 'Ignore duplex capabilities of scanner' preferences option.
+ Add running post-save hook on filenames with UTF-8, closes
bug (gscan2pdf#341), wrong character encoding at post-save
hook.
+ Add frequent layout/output-pages mismatch in unpaper dialog.
+ Don't allow dialog offering to switch from Facing to Reverse
after scanning double-sided pages to block scanner thread.
+ Translation updates.
- Changes from version 2.6.3:
+ Fallback to core PDF font if requested font cannot be loaded,
closes bug (gscan2pdf#336), saving to PDF never ends if empty
font is selected.
+ Detect GraphicsMagick in ImageMagick compatibility mode.
+ Set program name to RDN ID to allow Gnome to add gscan2pdf as
a favorite.
+ Fix importing metadata from PDFs when timezone has format like
GMT-14.
+ Translation updates.
- Changes from version 2.6.2:
+ Fix importing UTF-8 in DjVu text layer.
+ Fix crash importing metadata.
+ Add compatibility with combination of scanimage frontend and
SANE 1.0.28, closes bug (gscan2pdf#335), tests fail with
sane-backends 1.0.28.
+ Translation updates.
- Changes from version 2.6.1:
+ Fix crash importing metadata.
- Changes from version 2.6.0:
+ Fix crash closing multiple message dialog via x-icon, closes
bugs (gscan2pdf#333), segmentation fault when closing Messages
window and (gscan2pdf#334), closing Scan Document dialog using
close button causes gscan2pdf to exit.
+ Add --import-all option.
+ Add new rotate 180° icon.
+ Import metadata when opening PDF or DjVu files.
+ Increment/decrement date on save dialog with +/- keys.
+ Fixed reload-recursion bug triggered by unusual environment
(reprotest).
+ Translation updates.
- Changes from version 2.5.7:
+ Recognise "Document Table" as flatbed for imagescan backend.
+ Use option name as label for those options with no title.
+ Extended edit profile functionality in scan dialog to frontend
options.
+ Close device when switching frontends so as not to block SANE
for the new frontend.
+ Allow tool processes to immediately continue working on
subsequent pages despite errors on previous ones.
+ Fix infinite loop scanning reverse pages.
+ Translation updates.
- Changes from version 2.5.6:
+ Prevent Negate from changing the alpha channel.
+ Avoid image corruption with colour images when applying
WhiteThreshold after BlackThreshold.
+ Extended edit profile functionality in scan dialog to current
scan options, when no profile selected, closes bug
(gscan2pdf#328), blue cast to all colour scans.
+ Don't try to compress log file if it wasn't created.
+ Don't blacklist empty device name.
+ Improve layout of multiple message dialog, closes bug
(gscan2pdf#329), a scanner error (ADF jammed) caused GScan2PDF
to display an insane dialog box.
+ Don't use tiff2pdf to create temporary PDF to check for pdftk,
closes bug (gscan2pdf#330), cannot save, pdftk failure to
access /tmp.
+ Fix --import option, closes bug (deb#934107), importing with
--import=file.pdf does not import anything.
+ Fix updating extended page numbering on scan dialog after
changing document.
+ Fix printing, closes bug (gscan2pdf#331), print error openSUSE
Leap 15.1.
+ Set "wait" cursor while scan options are being loaded and
"progress" cursor while scanning.
+ Use gtk-3 cursors for ImageView widget.
+ Ghost scan button while scan options are being loaded and
scanning.
+ Fix bug storing responses from multiple message window when no
responses had been stored before.
+ Translation updates.
- Changes from version 2.5.5:
+ Fix occasional error messages when clearing all pages.
+ Only set paper to Manual if not applying profile.
+ Update OCR view switching between pages with and without OCR
output.
+ xz compress log file if xz available.
+ Fix bug applying paper after profile set SANE_INFO_INEXACT.
+ When saving current settings as new profile, actually set the
profile.
+ If a device throws an error when opening it, add it to a
session blacklist.
+ Option tolerance to cover buggy backends that return inexact
options without setting SANE_INFO_INEXACT.
+ Translation updates.
- Changes from version 2.5.4:
+ Fix bug applying paper whilst setting profile.
+ Fix canvas usage in scan dialog.
+ Allow tabs to be scrolled to reduce width of scan dialog,
closes bug (gscan2pdf#242), scan Document window cannot be
narrowed horizontally.
+ Restore split screen view for image and OCR output.
+ Translation updates.
- Changes from version 2.5.3:
+ Split up messages from gimp and unpaper to allow them to be
ignored more easily, closes bug (gscan2pdf#321), error messages
when returning from editing a scanned document using gimp.
+ Trap invalid dates in metadata, closes bug (gscan2pdf#323),
crash when saving with invalid date.
+ Use GTK's FontChooserDialog for selecting font for OCR output
in PDF.
+ Moved font discovery to program start to accelerate display of
save dialog.
+ Removed owner password, as it does not encrypt.
+ Don't reset to defaults if no scan options set, closes bug
(gscan2pdf#324), Changing scan resolution from the default 100
ppi to 200 ppi creates invalid syntax for sane parameters.
+ Translation updates.
- Changes from version 2.5.2:
+ Allow translations for message types in multiple message
window.
+ Improve progress message whilst analysing pages.
+ Don't reapply scan options after reload if setting returned
SANE_INFO_INEXACT.
+ Decode UTF-8 in font names for PDFs in save dialog.
+ Wait for processes to finish to prevent zombies, closes Debian
bug (deb#926634), delays opening dialogs, possibly related to
defunct fc-list process.
+ Fix warning message about pdftk (again), closes bug
(gscan2pdf#320), error message on startup: pdftk can't use
/tmp.
+ Rename dpi->ppi (again) and us->μs.
+ Translation updates.
- Changes from version 2.5.1:
+ Fix warning message about pdftk.
+ Translation updates.
- Changes from version 2.5.0:
+ Really optionally change the djvu access and modification times
to the metadata date.
+ Optionally encrypt PDFs.
+ Fix race condition when cancelling job, closes bug
(gscan2pdf#317) cancel tests randomly hang.
+ Fix bug causing Edit/Select/Blank only to work on second
attempt.
+ Fix bug where toolbar crop always operates on first page
+ Translation updates.
- Changes from version 2.4.0:
+ Offer to switch from Facing to Reverse after scanning
double-sided pages, closes feature request, (gscan2pdf#100).
+ Edit profile functionality to scan dialog.
+ Reset scan options to defaults before applying profile.
+ Split screen view for image and OCR output, closes feature
request, (gscan2pdf#57) Ability to view OCR output and Image
at same time.
+ Switched to GIMP-like controls - LMB for selecting and MMB for
panning.
+ Crop to toolbar and RMB menus.
+ Fix saving as TIFF G3/4 if image not depth 1.
+ Translation updates.
- Changes from version 2.3.0:
+ Optionally also include time information in metadata of PDF
or DjVU.
+ Closes feature request, (gscan2pdf#102) (always sets the time
to 0 UTC) (again).
+ Reduced "bouncing" effect when dragging OCR output
+ Fix update of image viewer/OCR output after deleting a page.
+ Support different resolutions in x and y directions.
+ Closes feature request, (gscan2pdf#101).
+ Make post-scan PNG conversion optional.
+ Remember size of multiple message window.
+ Translation updates.
-------------------------------------------------------------------
Mon Jan 7 15:36:27 UTC 2019 - malcolmlewis@opensuse.org
- Update to version 2.2.2:
+ Improved the error message when ImageMagick exceeds its
resources, (gscan2pdf#303).
+ Allow foreground colour of text of OCR output to be themed.
+ Correct some more vbox() calls left over from gtk+-2,
(deb#916011).
+ Use output image from user-defined tool even if it throws an
error.
+ Don't reapply buttons after reloading options,
(gscan2pdf#315).
+ Translation updates.
- Changes from version 2.2.1:
+ Clear OCR output canvas when switching pages.
+ Ignore trailing whitespace in error messages when filtering
them.
+ Lock initial view of OCR output to image when switching pages.
+ Fix centering of OCR output when zooming with mouse wheel.
+ Translation updates.
- Changes from version 2.2.0:
+ Check validity of device blacklist regex when applying
preferences.
+ Modify preference "Force new scan job between pages" to only
take effect when scanning from flatbed, (gscan2pdf#309).
+ Fixed crash switching frontend option in Edit/Preferences
between libimage-sane-perl and scanimage.
+ Fixed visibility of scan widgets when switching from
libimage-sane-perl to scanimage.
+ Collect all warning and error messages in one dialog,
(gscan2pdf#309, gscan2pdf#300).
+ Be more tolerant of errors whilst fetching options,
(gscan2pdf#313).
+ Use default text if the title of a group of scan options is
empty.
+ Lock panning of image and OCR output views.
+ Translation updates.
- Changes from version 2.1.7:
+ Report PerlMagick errors to user.
+ Add note about checking policy.xml in case of ImageMagick
Exception 445.
+ Add %De for filename extension to default filenames
directives.
+ On selecting flatbed, force single-sided unless
allow-batch-flatbed is enabled.
+ Fixed saving PDFs with non-ASCII characters in the path and no
extension, (gscan2pdf#312).
+ Update page range before calling process (e.g. OCR, crop,
etc).
+ Translation Updates.
- Changes from version 2.1.6:
+ Fixed starting processes from tools menu, (gscan2pdf#308).
+ Fixed opening UDT and unpaper dialog windows.
- Changes from version 2.1.5:
+ Pass page data to thread just in time to process it, rather
than when the process is defined. Previously, if the
pplication was still busy, say with tesseract whilst the user
tried to save, then the resulting document would be missing
the pages updated by tesseract, (gscan2pdf#247).
+ Translation Updates.
- Changes from version 2.1.4:
+ Fix email functionality broken in v2.1.3, (lp#1784168).
- Changes from version 2.13:
+ Only run test if session file can be deserialised,
(gscan2pdf#293).
+ Optionally also include timezone and time information in
metadata of PDF or DjVU, (gscan2pdf#102).
+ Don't unnecessarily use tiffcp on single-page TIFFs.
+ Translation Updates.
- Changes from version 2.1.2:
+ Fix bug causing config JSON file to be saved with numeric
locale and therefore potentially corrupt.
- Changes from version 2.1.1:
+ Fix saving profile bug caused by deprecated Gtk2 API.
+ Readd support for dragging files from file managers.
+ Translation Updates.
- Changes from version 2.1.0:
+ Support import of password-protected PDFs, (deb#894764).
+ Update cursor depending on edge of selection, and allow
selection to be modified by dragging the edge or corner.
+ Translation Updates.
- Changes from version 2.0.3:
+ Always update image viewer if page selection changes,
(deb#893026).
+ Fixed manually typing date in metadata dialog, (deb#893024).
+ If image is zoomed to fit viewer, update zoom when the size of
the viewer changes.
+ Update cursor depending on selected tool and position.
+ Build corrupt session file by hand rather than storing binary
file that is not universally compatible, (gscan2pdf#293).
+ Convert all scans to PNG to allow tesseract to extract
resolution.
+ Ignore invalid options in profile.
+ Ignore options in profile that are already within tolerance,
(gscan2pdf#294).
+ Translation Updates.
- Changes from version 2.0.2:
+ Clear view if no page selected.
+ Change boolean scan options to use switch instead of checkbox
widget.
+ Fixed manually typing date in metadata dialog, (deb#893024).
+ Take colours for image viewer from theme, (deb#893025).
+ Support Glib::Object::Introspection < 0.043.
- Changes from version 2.0.1:
+ Fixed editing OCR output.
+ Fixed displaying image after undoing.
+ Fixed displaying image after deleting page.
+ Fixed text in progress bars.
+ Fixed warning message clearing all pages if no scanner
detected.
- Changes from version 2.0.0:
+ Switch from gtk+-2 to gtk+-3, requiring the reimplementation
of GtkImageview in pure Perl, as C library not compatible with
gtk+-3 (deb#884030).
+ Fixed ghosting if flatbed only source option but not set,
(gscan2pdf#290).
+ Fixed setting preferences if frontend not set to
libsane-image-perl and no scanner available, (gscan2pdf#291).
- Update package requires.
-------------------------------------------------------------------
Thu Feb 22 23:13:30 UTC 2018 - malcolmlewis@opensuse.org
- Update to version 1.8.11:
*Preference "Force new scan job between pages".
* Support applying profiles resulting in multiple reloads, to
prevent profile dropdown from being cleared after setting
profile.
* Fix scan profile stays blank, (sf#276).
* Translation updates.
- Add additional requires for perl(Exception::Class).
- Add source asc file.
-------------------------------------------------------------------
Tue Dec 5 00:06:11 UTC 2017 - malcolmlewis@opensuse.org
Update to version 1.8.10:
* Support for scan options without ranges, e.g. booleans, in
tolerance check introduced in version 1.8.9.
Changes from version 1.8.9:
* Rename preference "Open scan dialog at program start"
-> "Open scanner at program start".
* Fix killing processes on cancel.
* Hide extended page numbering checkbox and source document
frame unless scanner is not capable of duplex and ADF is
selected. Therefore, for duplex-capable scanners, this is
never shown. For duplex-incapable scanners, this is shown if
the ADF is selected, but otherwise hidden.
* Support for the new API in ImageMagick 7 for unsharp mask.
* For single-sided documents, hide rotate facing/reverse/both
side dropdown.
* Missing documentation for Edit/Properties.
* Don't reapply scan settings if value is within tolerance,
(sf#287 Reload recursion limit (5050) exceeded).
* Fix crash reading corrupt config file, (sf#288).
* Translation updates.
- Changes from version 1.8.8:
* Filter out 1 and 2 digit integers from tool warnings. Show
original message, not filtered message, (sf#281 Error
processing with Tesserarct: Detected 99 Diacritics).
* Add option to profile only after successfully applying it.
* Fix default value for unpaper script direction.
* Fix race condition updating widgets before they can be created
after cycling device handle.
* Fix 16-bit PNM parsing.
* Fix Perl warning about redundant argument in sprintf.
* Translation updates.
- Changes from version 1.8.7:
* Units to scan and edit paper dialogues.
* Unsupported libsane-perl offered as Frontend choice
* Fixed support for Poppler (pdftops) as postscript backend.
* Reload recursion limit in Edit/Preferences, set reload
recursion limit as triangular number of number of scan
options, (sf#275 reload recursion limit).
* Fixed crash with scanimage frontend due to empty cache.
* Ghost save button, rather than hiding save dialogue if all
pages removed, (sf#253 Save dialoque does not stay open).
* Fixed bug causing profile dropdown to be cleared after setting
profile.
* Filter out integers from tool warnings, analogous to the hex
warnings from unpaper.
* Fixed visibility of options in save dialogue (again).
* Right mouse click in thumbnail panel makes the page range, for
example in save dialogue: default to "selected".
* Take filename of PDF to email from default filename settings
(and therefore from metadata). If this produces a blank
filename, use "document.pdf".
* Fixed bug requiring scan dialog to be requested twice after
changing frontend.
* Translation updates.
- Clean up spec file for submission to Factory
- Drop rpmlintrc.
-------------------------------------------------------------------
Tue Aug 22 17:51:40 UTC 2017 - zaitor@opensuse.org
- Update to version 1.8.6:
+ Fixed visibility of options for DjVu, JPEG, & TIFF in save
dialogue.
+ Reload recursion limit in Edit/Preferences. Break of out reload
recursion loop if maximum number of reloads is exceeded.
+ Reapply only those current scan settings that were reset by the
reload
+ Fixed unpaper detection for v0.3.
-------------------------------------------------------------------
Sat Aug 19 15:33:04 UTC 2017 - zaitor@opensuse.org
- Update to version 1.8.5:
+ Add support for Poppler (pdftops) as postscript backend.
+ Drop support for libsane-perl.
+ Reapply current scan settings for those scanners that reset
them when forcing a reload.
+ Eliminate unnecessary strings from gscan2pdf.pot to prevent
unnecessary work and confusion on the part of the translators.
+ Add A3 to default paper sizes.
+ Updated translations.
-------------------------------------------------------------------
Sat Jul 29 11:24:53 UTC 2017 - zaitor@opensuse.org
- Update to version 1.8.4:
+ Cope with Tesseract 3.0.5 writing Page 1 instead of Page 0.
+ Assume pixels/inch if the image doesn't know better.
+ Fix paragraph formatting in save as text output.
+ In preparation for future removal of libsane-perl frontend,
change default frontend libsane-perl -> libimage-sane-perl, and
similarly switch selected frontend on upgrade from older
version. Assuming no major problems occur, support for
libsane-perl will be removed in the next release.
+ Fixed bug writing postscript file.
+ Add support for ghostscript backend due to apparent bug in
tiff2ps.
+ Round scan options with ranges to valid values before applying.
+ Fixed bug updating list of option-dependent values.
- Add perl(Image::Sane) Requires: Now available in openSUSE, and
gscan2pdf is ported to use it.
-------------------------------------------------------------------
Sat Jul 1 17:05:09 UTC 2017 - zaitor@opensuse.org
- Update to version 1.8.3:
+ Fix rescan for devices not working properly.
+ Fixed bug writing multipage hOCR files.
+ Fixed bug switching between Tesseract and Cuneiform.
- Changes from versions 1.8.2:
+ Don't ignore warnings from unpaper.
+ Fix OCR being ghosted when Tesseract is installed.
+ Support for scanimage v1.0.27.
- Changes from version 1.8.1:
+ Consistently ghost OCR and unpaper tools if the appropriate
executables are not available.
+ Fixed display of tesseract error messages.
+ Make RTL test work for other versions of ImageMagick.
+ Improve support for button-type scan options.
+ icons/gscan2pdf-papyrus.svg for use with Papyrus-like themes.
+ ppm & pbm extensions to open file chooser.
+ Fixed multipage scanning for Samsung CLX-4190.
+ Change metadata filename codes to use strftime.
+ Many improvements to the display of OCR output.
+ Updated translations.
-------------------------------------------------------------------
Tue Apr 25 15:06:02 UTC 2017 - malcolmlewis@opensuse.org
- Updated to version 1.8.0:
+ "Writing system" option in "Clean Up" (unpaper) dialogue,
affecting the order in which the pages are imported when scans
are split. Closes feature request #94 add "Deskew", "Descreen",
"Split image" to "Save" dialog.
+ Support for Tesseract 3.05 (sf#243 tesseract 3.05 OCR Engine not
recognized).
+ Support for unpaper --no-mask-center option.
+ Contrast + brightness tool.
+ Option to convert filename whitespace to underscores.
+ Fix crash caused by undefined profiles in .gscan2pdf. Closes
support request #19 Will not run past crashed session.
+ Move config file to use $XDG_CONFIG_HOME or $HOME/.config
directory.
+ Various cosmetic improvements.
+ Translation updates.
-------------------------------------------------------------------
Mon Feb 20 19:56:34 UTC 2017 - zaitor@opensuse.org
- Update to version 1.7.2:
+ Suppress errors from CLI frontends caused by rounding.
+ Reload default scan settings after rescanning for devices.
- Add missing runtime perl(Date::Calc) Requires.
-------------------------------------------------------------------
Wed Jan 25 14:19:16 UTC 2017 - zaitor@opensuse.org
- Update to version 1.7.1 (boo#1021886):
+ Fixed bug setting preferences.
+ Fixed bug saving when no post-save hooks defined.
+ Fixed bug attaching PDF to email.
-------------------------------------------------------------------
Thu Jan 19 22:01:37 UTC 2017 - zaitor@opensuse.org
- Update to version 1.7.0:
+ post-save hook: post-save arbitrary command capability.
+ Option in Edit/Preferences to force # pages = all if ADF if
selected.
+ --import command-line option, command line options for Gnome
integration (lp#312839).
+ Fixed bug preventing append/prepend PDF in combination with set
timestamp.
+ Catch error setting timestamp for dates prior to 1970.
+ Correctly scale boundary boxes when importing text layer of PDF
+ Test and documentation fixes.
+ Fix saving TIFF with compression (introduced in 1.6.0).
+ Updated translations.
- Changes from version 1.6.0:
+ Catch errors importing text layer of DjVu.
+ Support for dragging files from Nautilus (or Konqueror, or
anything that delivers URIs) (lp#515854).
+ Support for brackets in imported djvu hidden layer.
+ Store document date as offset (reverted code introduced in
v1.3.9) (deb#842239).
+ Support ampersand (&) in filenames whilst saving images.
+ Refactor most system() calls to use IPC::Open3 to eliminate
need to escape special characters from shell.
+ Eliminate warnings when reloading scan options with option
groups.
+ Option to change the pdf and djvu access and modification times
to the metadata date.
+ Sort config file and ensure only currently used settings are
stored.
-------------------------------------------------------------------
Mon Nov 28 16:03:14 CET 2016 - fcrozat@suse.com
- Update to version 1.5.5:
+ Work around bug in imagemagick causing the image depth not to
be respected (sf#231).
+ Fix deleting pages by selecting thumbnails and hitting delete
key.
+ Fixed drag-and-drop operations broken in v1.5.2 (sf#232).
- Changes from version 1.5.4:
+ Fixed cycle SANE handle error when using frontend other than
libsane-perl.
+ Fixed bug preventing # pages = all by default, even with ADF
(deb#840534).
- Changes from version 1.5.3:
+ Added scroll bars to all tabs on scan dialog (sf#228).
+ Fixed bug copy-pasting pages where subsequent operations on new
pages are carried out on old pages.
+ Changed default compression for lineart PDFs to PNG.
+ Fixed cycle SANE handle option to reset options after
reloading.
+ Fixed Perl warnings if backend offers no "source" scan option.
+ Updated translations.
-------------------------------------------------------------------
Fri Sep 16 14:25:14 CEST 2016 - fcrozat@suse.com
- Update to version 1.5.2:
+ Fixed bug prepending or appending to a PDF with a space in the
path.
+ Refactored code handling geometry options to reduce complexity
and duplication.
+ Removed metadata variables %h, %i, %s, adding %H, %I, %S
(sf#226 Formatting timestamp for filename template broken).
+ Encode document date in ASCII to workaround a bug in PDF::API2
where UTF-8 encoding caused garbage in the metadata (sf#224
CreationDate and ModDate fields are missing).
+ If the output from user-defined tool is pnm, there is no way to
tell the resolution, so assume that it is the same as the input
(sf#227 Page size corruption in 1.5.1).
+ Support hand-scanner option in test backend (sf#223 "Auto
length detection" option does not work with ScanSnap IX500).
+ Filter out double memory address from unpaper warning
(deb#833521 unpaper AVStream codec deprecation warning).
-------------------------------------------------------------------
Thu Aug 4 13:05:01 UTC 2016 - zaitor@opensuse.org
- Update to version 1.5.1:
+ Fix "Can't use string ("gimp %i") as an ARRAY ref".
+ Store and apply backend (scanner-specific) and gscan2pdf
settings separately.
+ Those frontend settings stored in profiles need not be stored
in general settings.
+ When paper in use, hide other geometry widgets.
+ When saving profile, if name already exists, add warning and
don't duplicate the combobox text.
-------------------------------------------------------------------
Sat Jun 11 18:16:06 UTC 2016 - gankov@opensuse.org
- Update to version 1.5.0:
+ Also import text layer when importing PDF or DjVu.
+ Option in Edit/Preference to allow/forbid batch scanning from a
flatbed
+ Store date as string to avoid time zone problems. Closes Debian
bug #823626 (Date in file name off by one day when saving)
+ Show warning when importing a PDF if number of images is not
equal to number of pages.
+ Option not to close save dialog.
Closes feature request #91 (Keep save dialoque open)
+ Update to Occitan (post 1500) translation (thanks to Cédric
VALMARY)
-------------------------------------------------------------------
Wed Apr 20 12:24:17 UTC 2016 - zaitor@opensuse.org
- Update to version 1.4.0:
+ Fixed double file overwrite confirmation.
+ Update paper size combobox after setting profile.
+ Integrate user-defined tools into scan post-process dialog
window for user-defined tools.
+ Fixed extended page numbering toggle.
+ Fixed restoring crashed session.
+ Fixed paper sizes after switching device. (Options for A4, US
Legal, and US Letter have disappeared in the Geometry options
for Scansnap IX500 in 1.3.9).
+ Correct hiding/showing of widgets when saving JPEG.
+ Save session after an action rather than before so as not to
lose the last action in the event of a crash.
+ Updated translations.
-------------------------------------------------------------------
Sat Mar 12 18:04:52 UTC 2016 - fcrozat@suse.com
- Update to version 1.3.9:
+ Fixed warning from Perl 5.10.1 about use of uninitialized value
in subroutine entry in Gscan2pdf/Dialog/Scan/CLI.pm.
+ Store absolute date instead of offset.
+ If get_message_area() not available (because gtk+ is too old),
use get_content_area() or vbox().
+ Differentiate between readonly file and directory in error
messages.
+ Fixed bug opening session file.
+ A deleted profile stays deleted across sessions.
+ Fixed multiple reload callback, affecting setting profiles.
+ If a profile affects geometry settings, update paper size
widget appropriately.
- Changes from version 1.3.8:
+ Fixed bug saving TIFF, introduced in v1.3.6.
+ Fixed bug running tesseract from OCR dialog, introduced in
v1.3.7.
+ Fixed bug saving, retrieving and applying profiles
+ Updated translations.
- Changes from version 1.3.7:
+ Fixed check that pages have been saved.
+ Fixed scan->rotate->unpaper->OCR chaining (again).
+ Filter out memory address from unpaper warning.
+ Ensure that process numbering is properly reinitialised when
queue is empty.
+ Fixed error importing PDF with more than 999 pages. However,
this exposed the problem that each page is held as an open
temporary file and that the system can run out of file handles
somewhere after 1000.
-------------------------------------------------------------------
Sun Jan 10 13:16:25 UTC 2016 - zaitor@opensuse.org
- Update to version 1.3.6:
+ Use simplified tesseract call for tesseract >= 3.02.02.
+ Add completion for author, title, subject & keyword metadata.
+ Store the list of pages to be saved on hitting the save button,
not waiting to choose the filename (deb#648627).
+ Fixed progress text when importing files with multiple pages.
+ Some scanners activate paper-width and paper-height only for
the ADF, and thus send "invalid argument" when setting the
paper size for the flatbed. Trap this by also testing whether
these options are active when setting the paper size.
+ When scanning "all" pages, but only a finite number are
possible, report this in the progress bar.
+ Update list of available paper sizes after every option reload,
as different sources (e.g. flatbed, ADF) support different
geometries.
+ Update list of rpm dependencies in .spec files.
+ Updated translations.
-------------------------------------------------------------------
Tue Dec 1 10:36:16 UTC 2015 - tuukka.pasanen@ilmi.fi
- Updated to version 1.3.5
+ Add prepend and append to PDF save options.
+ Use new threading philosophy for scanning thread.
+ Fix bug applying profiles with duplicated or invalid options.
+ Selecting single-sided pages also selects facing page (sf#206)
+ Fixed scan->unpaper->OCR chaining.
+ Changed defaults so that unpaper does not run by default after
scanning.
+ Enabled hours, minutes and seconds in filename template.
+ Updated translations.
- Add perl(Filesys::Df) and perl(Data::UUID) Requires: New runtime
requirements.
- Add tesseract-ocr Recommends.
-------------------------------------------------------------------
Tue Aug 11 12:20:14 UTC 2015 - zaitor@opensuse.org
- Update to version 1.3.4:
+ Fix startup crash due to incorrect MessageDialog type and
buttons.
- Changes from version 1.3.3:
+ Suppress warnings when passed boolean as empty string
(lp#844582).
+ Moved config file format to JSON. JSON::PP is a core module, so
this does not create a new dependency + option not to show
dialog messages.
+ Trap errors from unpaper, rotate, crop, threshold, negate,
unsharp processing tools (sf#198).
+ Removed dependency on liblinux-distribution-perl as not
available on FreeBSD.
+ Also support gconftool-2 when checking for email client
(sf#200).
+ Fixed program hang importing an empty file at the same time as
other files.
+ Rewrite threading system to simplify it and remove many race
conditions.
+ Fixed bug setting threshold-before-ocr check box.
+ Updated translations.
- Changes from version 1.3.2:
+ Fixed program hang displaying save dialog.
- Changes from version 1.3.1:
+ Fixed bug saving PDF after thresholding.
+ Warn if less free space in session directory than limit set in
preferences.
+ Fix defaults for unpaper and output-pages<->layout
misalignment.
+ Where available in the OCR output, use the full
page/column/para/line/word hiearchy in the djvu text layer
(sf#191).
+ Remove corrupt element from session after importing (sf#195).
+ Updated translations.
- Changes from version 1.3.0:
+ Avoid leading & trailing spaces in filename expanded from
template (sf#172, sf#169, deb#774099).
+ Various GUI improvements (deb#774093).
+ Improvements to the display of OCR output (deb#774094).
+ More improvements to date metadata widget (deb#774103).
+ More improvements metadata for DjVu (deb#774097).
+ Refactored logging of OCR dependencies (deb#710428).
+ Catch many filesystem errors.
+ Return in one of the entry widgets in the the save dialog hits
the save button.
-------------------------------------------------------------------
Thu Jan 1 18:26:01 UTC 2015 - gankov@opensuse.org
- Update to version 1.2.7:
+ Use date from entry rather than calendar widget (sf#183).
+ Use icons for 'email as PDF' and the hand tool (lp#1197264).
+ Threshold as part of OCR process.
+ Fix bug saving encoded characters in hOCR.
+ Fix bug saving defaults that are not part of a profile.
+ Add scrollbars to the 'Page Options' tab to make the scan
button visible on screens that are shorter than the scan
dialog (sf#188).
+ Fix crash on start if tesseract is not installed.
+ Fix button display in Tools > Unsharp Mask (deb#769823).
+ Updated translations.
- Change package to be noarch.
- Add fdupes BuildRequires and call the macros.
-------------------------------------------------------------------
Sun Sep 28 10:49:59 UTC 2014 - gankov@opensuse.org
- Update to version 1.2.6:
+ Fix support for tesseract 3.02, broken by commit ae76b3cf.
+ Changed 'save text' to extract plain text from hOCR output
and 'save hOCR', to save hOCR output, where available.
+ Fixed logic of automatic selection of blank or dark pages.
+ If an error occurs whilst opening a device, remove it from the
device list and try the next, rather than giving up straight
away.
+ Added text entry for date on save dialogs. Closes
feature-requests #81 (option to manualy keyin date (or at least
year).
+ Added device blacklist.
+ Fixed add paper button. Closes bug #178 (unable to add
geometries).
+ Increase maximum page number to 9999. Feature request 82
(Scanning documents that are 1000 pages or more).
-------------------------------------------------------------------
Sun Jun 1 16:03:32 UTC 2014 - fcrozat@suse.com
- Update to version 1.2.5:
+ Fix today button on date dialog saving PDF
Closes bug #171 "Today" button in calendar jumps to
February 1th, 1970
+ Fix resolution when processing non-standard sized images with
unpaper
+ Speed up downsample option by using imagemagick sample instead
of resize
+ Remove unnecessary decode_utf8() call causing
'Cannot decode string with wide characters' error in Perl 5.18.
+ Add support for tesseract 3.03.
Closes bug #173 "v1.2.4 doesn't display any output"
+ Fix bug writing images with quotes in filename
Closes bug #174 "Fail to save file when target folder has
quote in filename"
+ Fix setting options which don't cause a reload.
+ Closes bug #168 (Resolution Errors on Multiple Scanners)
+ Closes bug #170 (Format A2 in PDF properties despite having
chosen A4 while scanning)
+ Closes Debian bug #742233 (wrong resolution)
+ Closes LP: #1304484 (resolution incorrect, saved pdf far too
large)
- Changes from version 1.2.4:
+ Tie PageRange widgets together: Closes bug #165 i
"all or selected? a surprise that can bite like snake" again
+ Fix parsing the units of the resolution of imported images.
+ Fix infinite loop scanning page 1 when 5+ exist.
+ Parse negative progress percentages from scanimage.
+ Fix scan dialog if no devices found.
- Package appdata informations.
-------------------------------------------------------------------
Sat Mar 22 15:43:17 UTC 2014 - gankov@opensuse.org
- Update to version 1.2.3:
+ Deal with crashed sessions with no session file.
+ Fixed bug setting TMPDIR in preferences.
+ Added menu item 'Open crashed session'.
+ Don't process empty lists of pages.
Closes bug #165 "all or selected? a surprise that can bite like
snake".
- Changes from version 1.2.2:
+ Fixed paper editor widget.
+ Fixed position of paper size widget.
+ Hide geometry widgets at startup if paper selected.
- Changes from version 1.2.1:
+ Fixed opening saved sessions.
+ Fixed storing resolution of scanned images.
Closes Debian bug #734854 (gscan2pdf wrong resolution).
- Changes from version 1.2.0:
+ Don't lose extension if user-defined tool converts pnm to pbm,
ppm or pgm (lp#889549 again).
(gscan2pdf gimp integration creates page size error)
+ Allow thread to import different number of pages than
requested (lp#1163739: Import of pdf no longer working).
+ Take the resolution directly from the scanner when scanning
rather than assuming that the system value is up-to-date.
Closes bug 134 (reduces PDF to half size of scan).
+ Fixed UTF8 handling with gocr.
+ Fixed import of multipage TIFFs (lp#1181019: importing existing
multipage tif file loads only the first one).
+ Actually change the device when the device combobox is changed.
(deb#729589: Can not scan using a Canon LiDE 210 with version
1.1.3-1).
+ Show/hide options in CLI frontends via Edit/Preferences.
+ Fix Thunderbird detection from XFCE (deb#701581: Thunderbird
detection (for send email) does not work reliably on XFCE).
+ Fixed bug opening a session file from multiple sessions
+ option in Edit/Preferences to automatically open the scan
dialog in the background on program start. Closes debian bug
#717479 (Background-scanning for devices and options).
+ Updated translations.
- Add perl(List::MoreUtils) requires.
-------------------------------------------------------------------
Thu Oct 10 08:25:31 UTC 2013 - dimstar@opensuse.org
- Fix dependencies, as identigied in bnc#844227:
+ Add perl(Readonly) Requires.
+ Replace perl(Gtk::ImageView) Requires with
perl(Gtk2::ImageView).
-------------------------------------------------------------------
Wed Apr 17 18:20:48 UTC 2013 - dimstar@opensuse.org
- Initial package, version 1.1.3.
