File JeOS.changes of Package JeOS
-------------------------------------------------------------------
Fri May 21 22:38:02 UTC 2021 - Stefan Brüns <stefan.bruens@rwth-aachen.de>
- Add Radxa RockPi N10 (rockpin10)
- Move rockpi4/rock64 into Rockchip section
-------------------------------------------------------------------
Fri May 21 18:29:12 UTC 2021 - Matwey Kornilov <matwey.kornilov@gmail.com>
- add contrib / odroidc4 flavor
-------------------------------------------------------------------
Mon May 17 14:53:45 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Add package 'udisks2' for non-minimal images - boo#1185739
-------------------------------------------------------------------
Wed May 12 06:49:16 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Do not set disk_start_sector="" until
https://github.com/OSInside/kiwi/issues/1749 is resolved
-------------------------------------------------------------------
Mon Apr 26 06:33:15 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Drop 'insserv-compat' from the list, as it has been dropped from
Factory
-------------------------------------------------------------------
Sun Apr 25 18:47:49 UTC 2021 - Cameron Rapp <camspam@redhyena.net>
- Move grub2-snapper-plugin into the USE_EFI block
-------------------------------------------------------------------
Fri Apr 16 18:42:21 UTC 2021 - Adrian Campos Garrido <adriancampos@teachelp.com
- Pinephone: include all Phosh packages from patterns-phosh, and
clean up unneeded packages.
- PinePhone: rename relevant firmware packages.
- PinePhone: delete vibrator gpio on boot.
- Change loadext4 to read scr config in u-boot.
- Plymouth: replace dropped theme by the actual default theme in
openSUSE - without it Plymouth was showing a black screen.
-------------------------------------------------------------------
Thu Apr 15 15:06:21 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Add 'dtb-nvidia' to JeOS-efi.aarch64 to support Jetson Nano
- Add enp1s0 in config.sh for Jetson Nano
-------------------------------------------------------------------
Mon Apr 12 13:08:30 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Add btrfs_quota_groups="true" for btrfs images
-------------------------------------------------------------------
Thu Apr 8 13:03:21 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Add 'sdhci-of-dwcmshc' to the list of modules for rk3399 based images
- Disable BTRFS on some boards - boo#1183717
-------------------------------------------------------------------
Tue Apr 6 12:40:32 UTC 2021 - Matwey Kornilov <matwey.kornilov@gmail.com>
- Use u-boot-zynqzturnv5 for JeOS-zturn
-------------------------------------------------------------------
Wed Mar 24 10:43:39 UTC 2021 - Andreas Schwab <schwab@suse.de>
- Add JeOS-hifiveunleashed
- Use correct grub directories
- Remove obsolete workaround for live-add-yast-repos on riscv64
-------------------------------------------------------------------
Thu Mar 18 08:11:34 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Add 'readcd' for XFCE image as it is required by brasero
-------------------------------------------------------------------
Tue Mar 16 08:04:44 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Clean-up lists of board in pre_checkin.sh
- Enable GFX images for pinebookpro
- Drop readcd from LXQT image (reduce diff between Tumbleweed and Leap)
-------------------------------------------------------------------
Thu Mar 11 13:10:55 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Move images from contribs to regular Tumbleweed since
u-boot now builds again arm-trusted-firmware in Tumbleweed (TW only):
* clearfog (devel:ARM:Factory:Contrib:ClearFog)
* fireflyrk3288, pinebookpro, rock64, rockpi4, rockpro64, tinker (devel:ARM:Factory:Contrib:Rockchip)
* pine64 (devel:ARM:Factory:Contrib:Pine64)
-------------------------------------------------------------------
Thu Mar 11 12:53:57 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Drop elfutils, lvm2, net-tools-deprecated and sg3_utils.
Move audit, bluez and command-not-found out of JeOS.
Replace cracklib-dict-full with cracklib-dict-small - boo#1183361
-------------------------------------------------------------------
Wed Feb 24 10:10:37 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Do not version libyui-*-pkg to be future proof
-------------------------------------------------------------------
Fri Feb 19 19:45:08 CET 2021 - Adrian Campos Garrido <adriancampos@teachelp.com>
- Add some packages in PKG_TAG instead in packagelist (pinephone)
-------------------------------------------------------------------
Fri Feb 19 09:55:08 UTC 2021 - Andreas Schwab <schwab@suse.de>
- Exclude Mesa-dri-nouveau and Mesa-gallium on riscv64
-------------------------------------------------------------------
Wed Feb 17 10:11:22 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Add dtb-amlogic for aarch64 EFI flavor - boo#1182354
-------------------------------------------------------------------
Wed Feb 17 08:21:52 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Include pulseaudio for all gfx images - boo#1182176
-------------------------------------------------------------------
Tue Feb 16 15:33:00 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Rename armv6 raspberrypi to raspberrypi1
- Rename and merge raspberrypi3 and raspberrypi4 to raspberrypi
- Drop raspberrypi2 and raspberrypi3 specific configs:
* xorg config to force kms
* Ignore HDMI hotplug on raspberrypi3
- Update pre_checkin.sh to ease backports to Leap (wrt contribs)
- Add Mesa-* packages for gfx images
-------------------------------------------------------------------
Mon Feb 15 12:18:55 UTC 2021 - Matthias Brugger <mbrugger@suse.com>
- Image-wega is broken since July 2020. U-Boot support was discontinued.
Stop building an image for the board.
-------------------------------------------------------------------
Mon Feb 15 11:30:32 UTC 2021 - Nicolas Patricio Saenz Julienne <nsaenzjulienne@suse.com>
- Add 'rapsberrypi-eeprom' to all Raspberry Pi 4 builds (jsc#SLE-13566).
-------------------------------------------------------------------
Mon Feb 1 08:58:25 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Shift start sector (disk_start_sector="8192") to have more space
for u-boot and (maybe) improve performances on SD cards - boo#1180728
-------------------------------------------------------------------
Tue Jan 26 14:22:30 UTC 2021 - Dirk Müller <dmueller@suse.com>
- update contribs: 96boards is now HiKey
-------------------------------------------------------------------
Wed Jan 13 07:07:50 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Drop also xfce4-panel-plugin-notes
-------------------------------------------------------------------
Tue Jan 12 17:39:05 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Drop exo-branding-openSUSE which is not part of xfce4-branding-openSUSE
anymore
-------------------------------------------------------------------
Tue Jan 12 18:02:22 CET 2021 - Adrian Campos Garrido <adriancampos@teachelp.com>
- Add Plasma Mobile images for Pinephone
-------------------------------------------------------------------
Tue Jan 12 11:02:22 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Install irqbalance on all images
-------------------------------------------------------------------
Tue Jan 12 10:57:32 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Drop xfce4-mixer, xfce4-panel-plugin-mixer and orage
as they are not yet compatible with latest xfce
-------------------------------------------------------------------
Mon Jan 4 10:30:42 UTC 2021 - Andreas Schwab <schwab@suse.de>
- Add efi images for riscv64
-------------------------------------------------------------------
Mon Jan 4 10:01:51 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Add JeOS-rockpro64, using contribs
-------------------------------------------------------------------
Thu Dec 31 16:03:43 UTC 2020 - Stefan Seyfried <seife+obs@b1-systems.com>
- add "dtc" package for easy manipulation of device tree files
- config.sh: make NetworkManager actually work
* "suseInsertService NetworkManager" does not work if
wicked-service is installed
* wicked-service is installed always, sysconfig requires it
* resolve by checking if NM is installed and if it is, first
disable network (=> wicked), then enable NM (=> network)
-------------------------------------------------------------------
Tue Dec 22 12:10:11 CET 2020 - Adrian Campos Garrido <adriancampos@teachelp.com>
- Add PackageKit to get a working app store in Pinephone
- Add libqmi-tools needes for SIM to work
-------------------------------------------------------------------
Wed Dec 16 16:10:11 CET 2020 - Adrian Campos Garrido <adriancampos@teachelp.com>
- Use LABEL for root disk
- Use Nautilus instead nemo
- Update units in pinephone u-boot to work with jumpdrive using internal flash
-------------------------------------------------------------------
Wed Dec 16 14:17:27 UTC 2020 - Stefan Seyfried <seife+obs@b1-systems.com>
- Add BananaPi M2 zero
-------------------------------------------------------------------
Tue Nov 24 11:10:11 UTC 2020 - Matthias Brugger <mbrugger@suse.com>
- Add BananPi R2 image
-------------------------------------------------------------------
Fri Nov 20 14:06:42 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Add pinebookpro image, using contribs
-------------------------------------------------------------------
Mon Nov 15 09:28:54 CET 2020 - Adrian Campos Garrido <adriancampos@teachelp.com>
- Add fonts, new drivers for camera and wireless regulatorydb in PHOSH
-------------------------------------------------------------------
Mon Nov 9 09:28:54 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Include pam* packages also in JeOS
-------------------------------------------------------------------
Thu Nov 5 08:46:10 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Add 'pam_pwquality'
-------------------------------------------------------------------
Sun Nov 01 12:36:45 CET 2020 - Adrian Campos Garrido <adriancampos@teachelp.com>
- Delete lock for kernel packages as not needed since building with OBS
-------------------------------------------------------------------
Sun Oct 25 11:36:45 CEST 2020 - Adrian Campos Garrido <adriancampos@teachelp.com>
- Fix u-boot for Pinephone using KERNEL_CMDLINE and adding a variable for device detection
- Add gpio support for u-boot
-------------------------------------------------------------------
Fri Oct 23 20:36:45 CEST 2020 - Adrian Campos Garrido <adriancampos@teachelp.com>
- Added some packages needed for PHOSH
- Add DTB package to use with kernel
- Set hostname variable instead localhost for pinephone
-------------------------------------------------------------------
Mon Oct 19 13:15:45 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Update libyui*pkg from 13 to 14
-------------------------------------------------------------------
Fri Oct 9 09:25:08 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Build PHOSH image only for the pinephone
-------------------------------------------------------------------
Mon Oct 5 10:20:41 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Add btrfsmaintenance package when btrfs is used
-------------------------------------------------------------------
Wed Sep 30 12:24:51 UTC 2020 - Andreas Schwab <schwab@suse.de>
- No longer exclude plasma5-addons on riscv64
-------------------------------------------------------------------
Wed Sep 30 09:43:47 UTC 2020 - Andreas Schwab <schwab@suse.de>
- Remove obsolete libubsan0
-------------------------------------------------------------------
Tue Sep 29 12:04:57 UTC 2020 - Matthias Brugger <mbrugger@suse.com>
- All pinephone packages are now in the contrib project. Get rid of the home project.
-------------------------------------------------------------------
Tue Sep 29 06:43:53 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Fix pinephone images by setting them as contrib
-------------------------------------------------------------------
Fri Sep 25 09:31:21 UTC 2020 - Adrian Campos Garrido <adriancampos@teachelp.com>
- Add autoresize to FS
- Add fonts to terminal
- Improved core packages (Pinephone-helpers, Phoc, Chatty, Phosh,...)
-------------------------------------------------------------------
Mon Aug 31 17:31:21 UTC 2020 - Adrian Campos Garrido <adriancampos@teachelp.com>
- Add pinephone build
-------------------------------------------------------------------
Sat Aug 15 07:31:21 UTC 2020 - Manu Maier <mmanu84@outlook.de>
- Update to use libyui-*-pkg13
-------------------------------------------------------------------
Thu Aug 6 16:04:37 UTC 2020 - Andreas Schwab <schwab@suse.de>
- Fix outdated email in preamble
-------------------------------------------------------------------
Tue Jul 28 13:50:23 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Configure eth0 for Tumbleweed as well, since some boards use
this naming instead of enpXsY
-------------------------------------------------------------------
Tue Jul 7 13:31:52 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Do not install both wicked and NetworkManager - boo#1141433
-------------------------------------------------------------------
Wed Jun 17 14:30:02 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Drop baseStripFirmware - boo#1127613
-------------------------------------------------------------------
Mon Jun 15 16:04:20 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Add lsof for zypper ps (bsc#1167553)
-------------------------------------------------------------------
Wed Jun 10 13:08:11 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Use the compressed version kernel-firmware-all instead of
uncompressed kernel-firmware
-------------------------------------------------------------------
Wed Jun 10 07:01:38 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Update to use libyui-*-pkg12
-------------------------------------------------------------------
Mon May 25 10:22:19 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Add issue-generator to add back the banner (was pulled by
openSUSE-release)
-------------------------------------------------------------------
Sun May 10 13:30:09 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Drop xf86-video-ast, obsoleted by xorg-x11-server
-------------------------------------------------------------------
Tue Apr 28 12:32:03 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Convert remaining Allwinner, Exynos and Tegra boards to EFI boot since
they all have DISTRO_DEFAULTS=y in u-boot 2020.04
- Images not converted:
* (mx53)loco: DISTRO_DEFAULTS not set
* cubox, m400, midway: no u-boot
-------------------------------------------------------------------
Mon Apr 27 08:22:56 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Drop telepathy-haze from XFCE list since dropped from Factory
-------------------------------------------------------------------
Wed Apr 22 10:05:11 UTC 2020 - Andreas Schwab <schwab@suse.de>
- Remove python2 module dbus-1-python
-------------------------------------------------------------------
Wed Apr 22 08:55:02 UTC 2020 - Dirk Mueller <dmueller@suse.com>
- switch to python 3.x in the base images, remove python 2.x
-------------------------------------------------------------------
Tue Mar 31 15:11:15 UTC 2020 - Matwey Kornilov <matwey.kornilov@gmail.com>
- Add JeOS-zturn
-------------------------------------------------------------------
Wed Mar 25 09:06:32 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Fix boot with boot.scr (fix missing root="..." in kernel cmdline)
-------------------------------------------------------------------
Tue Mar 24 15:48:06 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Switch olinuxinolime to EFI boot to fix boo#1167565
-------------------------------------------------------------------
Thu Mar 19 08:45:48 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Switch from yast2-firstboot to jeos-firstboot since this what is
expected and tested in openQA, and used in x86 JeOS
-------------------------------------------------------------------
Thu Mar 19 07:06:16 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- libffi7 updated to libffi8 in Factory and not needed in the
packages list
-------------------------------------------------------------------
Tue Mar 10 08:48:21 UTC 2020 - Dirk Mueller <dmueller@suse.com>
- remove alacarte from XFCE images
-------------------------------------------------------------------
Wed Feb 26 08:20:42 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Drop armv7 RPi3 image with downstream rpi2 kernel support
- Increase EFI partition size for Raspberry Pi boards - boo#1164817
-------------------------------------------------------------------
Tue Feb 25 10:05:18 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Drop ext4 /boot partition when btrfs is used, since u-boot
2020.01 supports btrfs by default in openSUSE (not upstream)
boo#1164310
-------------------------------------------------------------------
Thu Feb 20 16:30:49 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Update _constraints to avoid to swap
-------------------------------------------------------------------
Sat Feb 15 14:08:17 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Handle u-boot-dtb.imx file (for sabrelite)
-------------------------------------------------------------------
Fri Feb 14 10:28:01 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Re-enable btrfs compression since kernel 5.5 seems better
regarding bsc#1101864
-------------------------------------------------------------------
Thu Feb 13 15:44:43 UTC 2020 - Frederic Crozat <fcrozat@suse.com>
- Move firewall-config to X11 based flavor, not needed on JeOS
flavors.
- Create a VMX aarch64 EFI flavor, pulling cloud-init and
kernel-default-base.
-------------------------------------------------------------------
Thu Feb 13 09:47:23 UTC 2020 - Frederic Crozat <fcrozat@suse.com>
- Fix default btrfs volumes list to follow defaults used on
Tumbleweed.
-------------------------------------------------------------------
Thu Jan 30 10:07:49 UTC 2020 - Matthias Brugger <mbrugger@suse.com>
- Add 'cma=300M' for RPi3 to make graphical desktop work - bsc#1162085
-------------------------------------------------------------------
Thu Jan 30 09:20:38 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- ifplugd dropped from Factory
-------------------------------------------------------------------
Tue Jan 28 16:25:05 UTC 2020 - Manu Maier <mmanu84@outlook.de>
- Remove blacklist vc4 for RPi4 (it is disable in raspberrypi-firmware
with devicetree overlay (disable-vc4.dtbo))
- Remove comment Workaround for Wifi at RPi3
-------------------------------------------------------------------
Mon Jan 20 14:19:48 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Drop xf86-video-siliconmotion as not buildable for %arm anymore
and AFAIK, this only make sense for x86
-------------------------------------------------------------------
Thu Jan 16 12:38:44 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Drop 'swiotlb=512 cma=300M' from RPi3/4 images - bsc#1160308
-------------------------------------------------------------------
Wed Jan 15 14:06:58 UTC 2020 - Dirk Mueller <dmueller@suse.com>
- disable btrfs compression to workaround bsc#1101864
-------------------------------------------------------------------
Wed Jan 8 14:58:41 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Fix snapper configuration (boo#1160314)
-------------------------------------------------------------------
Wed Jan 8 09:08:00 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Replace u-boot-rpi3 and u-boot-rpi4 by generic u-boot-rpiarm64
-------------------------------------------------------------------
Mon Dec 16 08:56:11 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Use libyui-*-pkg11 instead of libyui-*-pkg10
-------------------------------------------------------------------
Wed Nov 20 07:56:30 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Drop unused suseRemovePackagesMarkedForDeletion and suseConfig
from config.sh
-------------------------------------------------------------------
Wed Nov 13 13:15:51 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Add JeOS-HiKey960
-------------------------------------------------------------------
Fri Nov 8 11:14:09 UTC 2019 - Matwey Kornilov <matwey.kornilov@gmail.com>
- Add full u-boot support for rock64 board.
-------------------------------------------------------------------
Fri Oct 25 07:34:02 UTC 2019 - Manu Maier <mmanu84@outlook.de>
- Add RPi4 flavor
- Blacklist vc4 for RPi4
-------------------------------------------------------------------
Fri Oct 18 16:19:52 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- glchess dropped from Factory
-------------------------------------------------------------------
Mon Sep 16 09:02:22 UTC 2019 - Dirk Mueller <dmueller@suse.com>
- remove libxml2-python (has been replaced by python3-libxml2)
-------------------------------------------------------------------
Wed Sep 11 14:16:35 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Drop removed patterns:
* patterns-desktop-imaging_opt
* patterns-desktop-multimedia_opt
- Drop obsolete package:
* nfsidmap
-------------------------------------------------------------------
Wed Sep 4 07:27:18 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Drop _opt patterns as integrated to main pattern since
https://build.opensuse.org/request/show/727242
-------------------------------------------------------------------
Thu Aug 29 09:00:59 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Include bzip2 in JeOS as well, not only in gfx images
-------------------------------------------------------------------
Wed Jul 31 16:02:58 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Do not blacklist xhci_hcd, ohci-exynos and exynosdrm on
Arndale board
-------------------------------------------------------------------
Thu Jul 25 13:24:45 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Disable GFX images for Cortex-A8 boards
- Disable GFX images for most Cortex-A7 boards
- Disable GFX images for pandaboard (Cortex-A9 + unsupported GPU)
-------------------------------------------------------------------
Thu Jul 4 14:11:40 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Remove dropped packages libxproxy, proxymngr, xfindproxy, xfwp,
xrx, xtrap
-------------------------------------------------------------------
Sat Jun 29 14:47:42 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Bump libyui-*-pkg9 to libyui-*-pkg10
-------------------------------------------------------------------
Fri May 17 11:34:19 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Add virtio_gpu to JeOS-efi for 1st boot to help to have a working
screen early in qemu (help to debug boot problems on qemu)
-------------------------------------------------------------------
Thu Apr 25 08:30:02 UTC 2019 - Dirk Mueller <dmueller@suse.com>
- switch to package-update-indicator
-------------------------------------------------------------------
Thu Apr 18 07:06:16 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Update u-boot packages used by beaglebone and sinovoipbpim2plus
images, to follow renaming in u-boot v2019.04
-------------------------------------------------------------------
Fri Mar 29 07:31:23 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Disable armv7 KDE images from multibuild to save build power, but keep
kiwi files to be able to build locally, if needed
- Disable only armv7 GNOME images
- Disable gfx images for beagle (slow board and broken hdmi output)
-------------------------------------------------------------------
Wed Mar 27 15:24:15 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- *efi* images: Configure enp0s3 instead of eth0 device (Tumbleweed
only) to get a working Ethernet connection on boot in qemu
-------------------------------------------------------------------
Tue Mar 26 08:53:27 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Use live-add-yast-repos instead of adding repos manually
-------------------------------------------------------------------
Fri Mar 22 07:46:00 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- 'mkfontdir' is obsoleted by 'mkfontscale'
-------------------------------------------------------------------
Tue Mar 19 08:40:51 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Rename suseStripFirmware to baseStripFirmware
-------------------------------------------------------------------
Mon Mar 18 19:21:08 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Convert from ntpd to chronyd
-------------------------------------------------------------------
Fri Mar 15 09:35:13 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Remove 'gconf2-branding-openSUSE' (as dropped from Factory)
-------------------------------------------------------------------
Wed Mar 6 09:24:53 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Remove openssh-askpass (as dropped from Factory)
- Add rsync (as expected in openQA tests)
-------------------------------------------------------------------
Wed Feb 20 10:03:43 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Adjust _constraints to handle JeOS and gfx images separately
-------------------------------------------------------------------
Mon Feb 18 15:25:34 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Make use of patterns as a base ('requires' only, no 'recommends')
and have usefull packages on top
- Switch from SuSEfirewall2 to firewalld
-------------------------------------------------------------------
Mon Feb 18 12:37:55 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Remove 'python-qt4'
-------------------------------------------------------------------
Mon Feb 18 10:42:31 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Use 'openSUSE-release-ftp' in kiwi to avoid to set it in
'Project Config'. Leap uses 'openSUSE-release-appliance-custom'
which is not available for Tumbleweed
-------------------------------------------------------------------
Tue Feb 12 10:05:41 UTC 2019 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Use LXQT pattern for LXQT images
-------------------------------------------------------------------
Tue Jan 8 07:38:03 UTC 2019 - afaerber@suse.de
- Drop udooneo from contribs - it's working in Factory now
-------------------------------------------------------------------
Mon Dec 17 10:56:51 UTC 2018 - schwab@suse.de
- Exclude plasma5-addons on riscv64 for now
-------------------------------------------------------------------
Wed Dec 5 22:00:38 UTC 2018 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Remove midori-branding-openSUSE as it is removed from midori package
-------------------------------------------------------------------
Mon Dec 3 08:43:35 UTC 2018 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Latest openssh disables root login by default
Re-enable it as we do not use firstboot, so root
is the only account by default
-------------------------------------------------------------------
Thu Nov 29 07:19:49 UTC 2018 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Remove fbdev config for chromebook as it breaks X server
- Do not remove systemd-firstboot.service file as it may be used later
and is part of a RPM
-------------------------------------------------------------------
Thu Nov 29 07:18:49 UTC 2018 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Remove packages from GFX images:
* java-10-openjdk: removed from Tumbleweed and there is no
reason to have java installed by default
* java-ca-certificates: obsoleted by installed ca-certificates
* tzdata-java: no reason to have timezone-java installed since
there is no JVM installed by default anymore
-------------------------------------------------------------------
Tue Nov 13 14:27:09 UTC 2018 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Merge back Leap 15.1 update:
* Install Firefox branding only when Firefox is installed
-------------------------------------------------------------------
Fri Oct 12 09:25:25 UTC 2018 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Disable fbdev xorg config for EFI images
- Add 'snapper' when BTRFS is used (only EFI images for now)
- Enable default quota, when snapper is installed
-------------------------------------------------------------------
Fri Sep 14 08:11:46 UTC 2018 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Replace removed package 'python-beautifulsoup' by
'python-beautifulsoup4'
-------------------------------------------------------------------
Mon Aug 13 09:07:53 UTC 2018 - guillaume.gardet@opensuse.org
- Update packages list to use libyui-ncurses-pkg9 and
libyui-qt-pkg9 instead of version 8
-------------------------------------------------------------------
Mon Jul 23 09:35:28 UTC 2018 - guillaume.gardet@opensuse.org
- Clean-up uboot-image-setup.in to remove boards switched to EFI
-------------------------------------------------------------------
Wed Jul 18 13:37:57 UTC 2018 - guillaume.gardet@opensuse.org
- Convert chromebook (snow) to use EFI (patch backported to U-Boot
v2018.07)
-------------------------------------------------------------------
Tue Jul 17 08:45:01 UTC 2018 - guillaume.gardet@opensuse.org
- Convert Sabrelite to use EFI since U-Boot v2018.07 supports EFI
for this board
-------------------------------------------------------------------
Sun Jul 8 10:25:25 UTC 2018 - matwey.kornilov@gmail.com
- Set disk_start_sector="32768" for JeOS-rock64
It is required to allow enough space for rockchip uboot layout
-------------------------------------------------------------------
Thu Jul 5 19:14:38 UTC 2018 - guillaume.gardet@opensuse.org
- Use dracut for PXE images
- Remove JeOS-efi for armv7, since JeOS-efi-pxe will overwrite it.
Keep *-efi for aarch64 and x86_64 to keep gfx efi images.
-------------------------------------------------------------------
Thu Jul 5 13:41:47 UTC 2018 - guillaume.gardet@opensuse.org
- Update DISPLAYNAME_STR to display "openSUSE Tumbleweed" in Grub
-------------------------------------------------------------------
Sat Jun 23 14:33:16 UTC 2018 - afaerber@suse.de
- Fixup syntax error in imx6-spl.bin MBR check
* Drop cuboxi-spl.bin leftover
-------------------------------------------------------------------
Wed Jun 20 12:01:04 UTC 2018 - dmueller@suse.com
- include patterns-base-transactional_base for BTRFS based images
-------------------------------------------------------------------
Wed Jun 20 07:30:05 UTC 2018 - guillaume.gardet@opensuse.org
- Force MBR when imx6-spl.bin is used to fix Cubox-i
-------------------------------------------------------------------
Wed Jun 20 07:18:16 UTC 2018 - guillaume.gardet@opensuse.org
- Fix SoCFPGA all-in-one u-boot/SPL installation
-------------------------------------------------------------------
Thu Jun 14 19:54:49 UTC 2018 - guillaume.gardet@opensuse.org
- No need to force_drivers for chromebook anymore, add_drivers is
enough
- Add more modules to get display working on 1st boot also
-------------------------------------------------------------------
Wed Jun 13 18:54:15 UTC 2018 - guillaume.gardet@opensuse.org
- Fix chromebook boot by adding needed modules in dracut
-------------------------------------------------------------------
Fri Jun 1 21:14:39 UTC 2018 - matwey.kornilov@gmail.com
- Add *-wega images (Phytec Wega board based on TI AM335x platform)
-------------------------------------------------------------------
Thu May 24 14:12:59 UTC 2018 - dmueller@suse.com
- add Tumbleweed-Ports-repo-debug repository as well in the default
configuration for armv7hl and aarch64
-------------------------------------------------------------------
Thu May 24 13:07:49 UTC 2018 - fvogt@suse.com
- Also install bcm43xx-firmware for raspberrypi2 to allow the image
to work for both RPi2 and RPi3.
-------------------------------------------------------------------
Sun May 20 19:31:54 UTC 2018 - afaerber@suse.de
- Switch pine64 from kernel-sunxi64 to kernel-default
-------------------------------------------------------------------
Fri May 18 11:55:04 UTC 2018 - guillaume.gardet@opensuse.org
- Add zypper-aptitude to ease migration for people coming from
apt-get world
-------------------------------------------------------------------
Thu May 17 11:34:22 UTC 2018 - guillaume.gardet@opensuse.org
- Add chromium for aarch64
- Remove telepathy-salut since it is not available anymore
-------------------------------------------------------------------
Fri May 11 06:11:35 UTC 2018 - agraf@suse.com
- Set rpi3 serial to ttyS0 as we're not using firmware provided DTs
which set the serial aliases differently from the Linux DTs
-------------------------------------------------------------------
Tue May 8 14:04:13 UTC 2018 - dmueller@suse.com
- disable graphical images for armv6, too many unresolvables
that block all the other arches
-------------------------------------------------------------------
Thu May 3 06:45:16 UTC 2018 - guillaume.gardet@opensuse.org
- Remove Firefox for armv6 for now since it does not build for
armv6
-------------------------------------------------------------------
Mon Apr 30 10:12:45 UTC 2018 - agraf@suse.com
- Fix contrib URLs
-------------------------------------------------------------------
Thu Apr 26 13:42:52 UTC 2018 - agraf@suse.com
- Increase EFI partition size on generic ZynqMP platform to 42MB
to make enough space for bigger bitstreams
-------------------------------------------------------------------
Tue Apr 24 11:40:29 UTC 2018 - agraf@suse.com
- Convert contrib paths to full path so we can support home
contribs more easily
-------------------------------------------------------------------
Tue Apr 24 09:49:51 UTC 2018 - guillaume.gardet@opensuse.org
- XFCE: add readcd since brasero needs it
- Do not remove uboot-setup-efi.tgz since EFI PXE needs it
-------------------------------------------------------------------
Tue Apr 24 09:11:58 UTC 2018 - agraf@suse.com
- Split contrib and u-boot setup archives. That way we can now have
contribs that do not automatically pull in the kiwi-hooks logic.
-------------------------------------------------------------------
Tue Apr 24 08:36:39 UTC 2018 - agraf@suse.com
- Replace ZCU102 target with "ZynqMP" template that will be used as
backing file for generic contrib creation
-------------------------------------------------------------------
Tue Apr 17 19:28:28 UTC 2018 - dmueller@suse.com
- remove cdrtools
-------------------------------------------------------------------
Tue Apr 17 14:34:59 UTC 2018 - guillaume.gardet@opensuse.org
- Add ntfs tools also on JeOS
-------------------------------------------------------------------
Mon Apr 16 14:18:06 UTC 2018 - guillaume.gardet@opensuse.org
- Remove *.tgz files when not needed (dracut used for 1st boot and
no contrib repo used)
-------------------------------------------------------------------
Fri Apr 13 14:01:03 UTC 2018 - guillaume@opensuse.org
- Handle 2nd boot scripts with dracut (in config.sh) since
kiwi-hooks/ is not used when dracut is used for 1st boot
- Do not include *.tgz files when dracut is used for 1st boot
and no contrib repo is used
-------------------------------------------------------------------
Thu Apr 12 12:24:54 UTC 2018 - guillaume@opensuse.org
- Switch cuboxi and udooneo to EFI/Grub2
-------------------------------------------------------------------
Wed Apr 11 10:36:26 UTC 2018 - schwab@suse.de
- Use RISC-V as SUFFIX in image name for riscv64
-------------------------------------------------------------------
Tue Apr 10 10:10:57 UTC 2018 - schwab@suse.de
- Replace java-9-openjdk with java-10-openjdk
-------------------------------------------------------------------
Tue Apr 10 09:39:37 UTC 2018 - guillaume@opensuse.org
- Add GNOME images, but only build GNOME-rootfs and GNOME-efi images
in Factory:ARM since it is very slow on current supported hardware.
It allows local build if needed (may help to debug openQA issues).
-------------------------------------------------------------------
Mon Apr 9 08:38:50 UTC 2018 - guillaume@opensuse.org
- Fix Chromebook images
-------------------------------------------------------------------
Fri Apr 6 15:14:32 UTC 2018 - guillaume@opensuse.org
- Remove unneeded boot.scr update from installUBoot.sh
- EFI/Grub2 boards:
* Remove from uboot-image-setup.in
* Remove unnedeed uboot-image-*-setup
-------------------------------------------------------------------
Fri Apr 6 11:41:56 UTC 2018 - guillaume@opensuse.org
- Switch non EFI/Grub2 images to kiwi EFI/Grub2 system and
update u-boot scripts accoringly (tested on sabrelite)
- Switch arndale to EFI/Grub2
- Fix arndale BL1 detection to switch from GPT to MBR
- Remove efikamx, highbank and origen references
- sabrelite: remove 'imx-ipuv3-crtc' force load
-------------------------------------------------------------------
Fri Apr 6 11:13:50 UTC 2018 - agraf@suse.com
- Drop Linux device trees from rpi images. We can now successfully
reuse the firmware provided ones. That way (extra)config.txt changes
also propagate all the way down now.
-------------------------------------------------------------------
Thu Apr 5 12:58:42 UTC 2018 - agraf@suse.com
- Switch to dracut initrd for all boards where possible
- Remove NODRACUT option, it's no longer needed
-------------------------------------------------------------------
Thu Apr 5 12:15:49 UTC 2018 - dmueller@suse.com
- remove dtb-marvell for non-aarch64 efi images from extra pkg list
-------------------------------------------------------------------
Wed Apr 4 07:38:25 UTC 2018 - kasimir_@outlook.de
- Add raspberrypi-firmware-dt (boo#1086757)
-------------------------------------------------------------------
Tue Apr 3 09:38:47 UTC 2018 - schwab@suse.de
- Adjust Tumbleweed repo for riscv
-------------------------------------------------------------------
Sat Mar 31 22:21:51 UTC 2018 - agraf@suse.com
- Don't pass rootflags=size=100% to dracut images (efi, zynqmp)
- Remove direct console= parameter for ultra96
-------------------------------------------------------------------
Sat Mar 31 13:04:45 UTC 2018 - matwey.kornilov@gmail.com
- Add gawk to bootinclude to fix the following error from boot.kiwi
+ file=/proc/cmdline
++ awk '-F"' '{OFS="\"";for(i=2;i<NF;i+=2)gsub(/ /,"\030",$i);print}'
/include: line 4752: awk: command not found
-------------------------------------------------------------------
Tue Mar 27 12:26:10 UTC 2018 - guillaume.gardet@opensuse.org
- Add _constraints file to avoid 'no space left' errors
-------------------------------------------------------------------
Mon Mar 27 09:28:39 UTC 2018 - matwey.kornilov@gmail.com
- Move rock64 to aarch64 and contribs
- glibc locale moved to /usr/lib/locale
-------------------------------------------------------------------
Tue Mar 27 03:34:46 UTC 2018 - agraf@suse.com
- Use dracut initrd on Xilinx targets
- Fix serial port on Xilinx targets
-------------------------------------------------------------------
Mon Mar 26 11:22:13 UTC 2018 - matwey.kornilov@gmail.com
- Drop JeOS-espressobin: use JeOS-efi.aarch64 instead
- JeOS-rock64: the board now boots, but the image deploying requires manual
quircks
-------------------------------------------------------------------
Sun Mar 25 18:35:30 UTC 2018 - agraf@suse.com
- Add Contrib Ultra96 and ZCU102 flavors
-------------------------------------------------------------------
Sun Mar 25 13:23:21 UTC 2018 - schwab@suse.de
- Replace wodim/genisofs by cdrecord/mkisofs
-------------------------------------------------------------------
Mon Mar 19 08:58:04 UTC 2018 - guillaume@opensuse.org
- Remove xf86-video-omap for beagle and panda
-------------------------------------------------------------------
Sun Mar 18 11:11:12 UTC 2018 - schwab@suse.de
- Add cdda2wav and cdrtools for brasero
-------------------------------------------------------------------
Tue Mar 13 23:35:26 UTC 2018 - schwab@suse.de
- Exclude MozillaFirefox and xf86-video-siliconmotion on riscv64
-------------------------------------------------------------------
Tue Mar 13 22:00:50 UTC 2018 - schwab@suse.de
- Use mkisofs instead of cdrkit-cdrtools-compat
-------------------------------------------------------------------
Tue Mar 13 21:46:31 UTC 2018 - schwab@suse.de
- LXQT: remove kdelibs4-branding-openSUSE, kdebase4-openSUSE, add
plasma5-workspace-branding-openSUSE
-------------------------------------------------------------------
Sat Mar 10 23:28:36 UTC 2018 - schwab@suse.de
- Add cdrkit-cdrtools-compat for brasero
-------------------------------------------------------------------
Wed Mar 7 19:18:08 UTC 2018 - agraf@suse.com
- Change default EFI partition size to 16MB, because U-Boot seems
to have problems with FAT12
-------------------------------------------------------------------
Wed Mar 7 14:39:16 UTC 2018 - schwab@suse.de
- No libitm1 and libubsan0 on riscv64
-------------------------------------------------------------------
Wed Mar 7 14:15:52 UTC 2018 - agraf@suse.com
- Add riscv64 targets
-------------------------------------------------------------------
Fri Mar 2 13:21:38 UTC 2018 - schwab@suse.de
- Replace openssl-1_1_0 with openssl-1_1
-------------------------------------------------------------------
Tue Feb 27 15:35:03 UTC 2018 - schwab@suse.de
- Remove qemu-linux-user-arm from armv6 images
-------------------------------------------------------------------
Mon Feb 26 18:56:52 UTC 2018 - agraf@suse.com
- Map /boot as ext4 in btrfs case so u-boot can find dtbs
-------------------------------------------------------------------
Thu Feb 22 09:01:52 UTC 2018 - guillaume@opensuse.org
- Remove 'cdrkit-cdrtools-compat' package to fix mkisofs conflict
-------------------------------------------------------------------
Wed Feb 21 10:47:21 UTC 2018 - agraf@suse.com
- Use kiwi-ng for all archs again
- Use dracut initrd for -efi flavors
-------------------------------------------------------------------
Sun Feb 18 21:43:51 UTC 2018 - agraf@suse.com
- Remove cloud-init, deprecated by dracut-kiwi-oem-repart
- Use singular config package on rpi
-------------------------------------------------------------------
Sun Feb 18 12:17:34 UTC 2018 - schwab@suse.de
- Use kiwi-ng only for aarch64 for now
-------------------------------------------------------------------
Fri Feb 16 20:07:25 UTC 2018 - agraf@suse.com
- Remove vexpress* flavors, they are no longer useful (use AAVMF instead!)
-------------------------------------------------------------------
Fri Feb 16 12:48:38 UTC 2018 - agraf@suse.com
- Move to kiwi-ng (python-kiwi)
- Use dracut initrd for rpi3 (aarch64)
- Increase EFI partition size for rpi3
- Remove rootflags=size=100% from dracut targets
-------------------------------------------------------------------
Wed Feb 14 14:48:27 UTC 2018 - guillaume@opensuse.org
- Add cpupower and upower packages for proper powermanagement
- kiwi-ng:
* Add dracut-kiwi-oem-repart when kiwi-ng is used
* Fix choice for cloud-init
- Remove Beagleboard Alsa configuration from config.sh
-------------------------------------------------------------------
Fri Feb 9 15:12:11 UTC 2018 - guillaume@opensuse.org
- Add KDE (plamsa5) images
-------------------------------------------------------------------
Fri Feb 2 13:12:11 UTC 2018 - guillaume@opensuse.org
- Chromebook: Remove contrib repo and remaining contrib packages:
* UCM profiles: now provided in alsa packages
* X11-config : Xmodmap set in config.sh and X11 config is obsolete
- Strip initrd by removing:
* /usr/lib/python3.6/
* /usr/lib/sysimage/rpm
-------------------------------------------------------------------
Fri Feb 2 10:25:20 UTC 2018 - dmueller@suse.com
- remove console=ttyS0 for raspberrypi3
-------------------------------------------------------------------
Wed Jan 31 12:02:49 UTC 2018 - schwab@suse.de
- Remove yast2-control-center-gnome
-------------------------------------------------------------------
Mon Jan 22 21:25:02 UTC 2018 - schwab@suse.de
- Remove recode
-------------------------------------------------------------------
Sat Jan 20 23:38:26 UTC 2018 - agraf@suse.com
- RPi3: Remove force from swiotlb option, avoids mmc dma errors
-------------------------------------------------------------------
Fri Jan 19 16:25:47 UTC 2018 - agraf@suse.com
- RPi3: Use ttyS1 as well as ttyS0 (new DT exposes ttyS1)
- RPi3: Reduce amount of reserved CMA space, as we run OOM during
the kiwi initrd otherwise
-------------------------------------------------------------------
Thu Dec 14 20:40:59 UTC 2017 - stefan.bruens@rwth-aachen.de
- Remove workaround for 64bit group descriptors on ext4 filesystems,
this is supported since U-Boot 2016.11
-------------------------------------------------------------------
Thu Dec 7 16:51:50 UTC 2017 - stefan.bruens@rwth-aachen.de
- Include regulator modules in firstboot and runtime initrd for
Allwinner A64/H5 (e.g. Pine64)
-------------------------------------------------------------------
Mon Dec 4 19:51:50 UTC 2017 - frank@kunz-im-inter.net
- Add BananaPi M2+ board support
-------------------------------------------------------------------
Sun Dec 3 23:25:57 UTC 2017 - schwab@suse.de
- Replace geoclue by geoclue2
-------------------------------------------------------------------
Sun Dec 3 17:12:19 UTC 2017 - matwey.kornilov@gmail.com
- Add JeOS-espressobin for EspressoBin SBC
-------------------------------------------------------------------
Sat Dec 1 13:59:22 UTC 2017 - xxxxxmichl@googlemail.com
- Cleanup uboot-image-setup for Olimex boards
-------------------------------------------------------------------
Fri Dec 1 12:01:57 UTC 2017 - schwab@suse.de
- Replace openssl with openssl-1_1_0
-------------------------------------------------------------------
Wed Nov 29 08:39:20 UTC 2017 - guillaume@opensuse.org
- Remove 'xfce4-terminal' from the list except for XFCE image
- Add 'qterminal' for LXQT image
-------------------------------------------------------------------
Tue Nov 28 10:40:00 UTC 2017 - guillaume@opensuse.org
- Add lxqt-themes and lxqt-theme-openSUSE-default to the list of
LXQT packages
-------------------------------------------------------------------
Wed Nov 22 19:59:21 UTC 2017 - schwab@suse.de
- Replace java-1_7_0-openjdk by java-9-openjdk
-------------------------------------------------------------------
Fri Nov 17 10:30:29 UTC 2017 - guillaume@opensuse.org
- Chromebook:
* Remove obsolete libevdev0 from packagelist
* Add 50-touchpad.conf file to config.sh to tune touchpad behavior
* Disbale xf86-video-armsoc for now to use xf86-video-fbdev,
because Xorg crashes with xf86-video-armsoc
-------------------------------------------------------------------
Fri Nov 17 10:13:05 UTC 2017 - schwab@suse.de
- Remove pam-modules
-------------------------------------------------------------------
Tue Nov 14 14:12:07 UTC 2017 - guillaume@opensuse.org
- Fix 'vbutil_kernel' call to be able to boot U-Boot on Chromebook
-------------------------------------------------------------------
Sun Oct 29 09:16:02 UTC 2017 - schwab@suse.de
- Remove lxqt-common
- Remove hplip
-------------------------------------------------------------------
Sun Oct 8 08:31:29 UTC 2017 - schwab@suse.de
- Remove references to libexo-1-0-branding-openSUSE
-------------------------------------------------------------------
Sat Oct 7 01:02:30 UTC 2017 - afaerber@suse.de
- Install Pine64 U-Boot SPL
- Clean up obsolete i.MX6 SPL installation
-------------------------------------------------------------------
Mon Oct 2 22:13:41 UTC 2017 - schwab@suse.de
- Remove typelib-1_0-WebKit-3_0
-------------------------------------------------------------------
Sat Sep 9 14:05:40 UTC 2017 - schwab@suse.de
- Add patterns-base-basesystem
-------------------------------------------------------------------
Sun Aug 13 08:40:53 UTC 2017 - schwab@suse.de
- Replace libyui-*-pkg7 with libyui-*-pkg8
-------------------------------------------------------------------
Sat Jul 22 07:35:31 UTC 2017 - schwab@suse.de
- Remove ruby2.2 packages
-------------------------------------------------------------------
Sat Jun 10 12:28:34 UTC 2017 - schwab@suse.de
- Replace libgfortran3 by libgfortran4
-------------------------------------------------------------------
Sat Jun 10 07:18:19 UTC 2017 - schwab@suse.de
- Remove susehelp, susehelp_en
-------------------------------------------------------------------
Tue Jun 6 20:00:33 UTC 2017 - agraf@suse.com
- Drop explicit console= from EFI target; fw should provide
stdout-path these days
-------------------------------------------------------------------
Tue Jun 6 19:51:42 UTC 2017 - agraf@suse.com
- Add efi and efi-pxe flavors for armv7
-------------------------------------------------------------------
Tue May 23 02:49:15 UTC 2017 - afaerber@suse.de
- Install system-group-hardware and system-user-lp.
This fixes udev errors on first boot.
* Fix package sort order
-------------------------------------------------------------------
Sun May 21 23:07:39 UTC 2017 - afaerber@suse.de
- nanopik2: Install bcm43xx-firmware package
-------------------------------------------------------------------
Fri May 19 01:06:04 UTC 2017 - afaerber@suse.de
- Prepare udooneo and clearfog
* Group by SoC
* Drop duplicate a20olinuxinolime and paz00
* Fix indentation
-------------------------------------------------------------------
Fri May 19 00:03:38 UTC 2017 - afaerber@suse.de
- Fix odroidc2 theoretical gfx console settings
- Prepare nanopik2
* Group by SoC
-------------------------------------------------------------------
Mon May 8 09:45:41 UTC 2017 - schwab@suse.de
- Adjust names of patterns packages
-------------------------------------------------------------------
Wed May 3 10:07:52 UTC 2017 - schwab@suse.de
- Add omap_dma also for panda
-------------------------------------------------------------------
Tue May 2 22:29:05 UTC 2017 - afaerber@suse.de
- Fix console for fireflyrk3288 and tinker
-------------------------------------------------------------------
Fri Apr 21 05:01:46 UTC 2017 - afaerber@suse.de
- Update rksd SPL installation for U-Boot v2017.05
-------------------------------------------------------------------
Thu Apr 20 20:07:25 UTC 2017 - afaerber@suse.de
- Add nanopineoair (requires U-Boot v2017.05-rc2, kernel 4.12)
- Add fireflyrk3288
* Factory's u-boot-firefly-rk3288 v2017.03 is not booting -> Contrib
- Add tinker (requires kernel 4.12)
- Add odroidc2 (depends on odroidc2-firmware in Contrib:OdroidC2)
-------------------------------------------------------------------
Thu Apr 20 12:57:39 UTC 2017 - schwab@suse.de
- Remove fileutils, sh-utils, textutils
-------------------------------------------------------------------
Tue Apr 18 20:12:41 UTC 2017 - dmueller@suse.com
- prefer systemd-presets-branding-openSUSE and patterns-openSUSE-base
to fix choices for CaaSP/MicroOS
-------------------------------------------------------------------
Mon Mar 13 20:02:59 UTC 2017 - schwab@suse.de
- Replace libffi4 by libffi7
-------------------------------------------------------------------
Fri Feb 24 19:08:19 UTC 2017 - afaerber@suse.de
- nanopineo no longer needs to be a Contrib.
-------------------------------------------------------------------
Thu Feb 16 20:38:36 UTC 2017 - schwab@suse.de
- Remove obsolete gimp-help-browser
-------------------------------------------------------------------
Thu Feb 9 12:06:05 UTC 2017 - agraf@suse.com
- Prepare images for dracut firstboot (requires kiwi8, deactivated atm)
- Add cloud-init config and include code
- Change used moint point in u-boot install scripts to mnt-tmp (conflicted
with /mnt of the rootfs)
- Install btrfsprogs on systems with btrfs rootfs
-------------------------------------------------------------------
Fri Feb 3 16:02:07 UTC 2017 - dmueller@suse.com
- drop gstreamer-0_10-* related packages
-------------------------------------------------------------------
Fri Feb 3 00:51:13 UTC 2017 - stefan.bruens@rwth-aachen.de
- Change kernel name from kernel-pine64 to kernel-sunxi64
- Add dtb-allwinner to Pine64 image
-------------------------------------------------------------------
Wed Feb 1 12:24:36 UTC 2017 - agraf@suse.com
- RPi3: Enable KMS again and bump CMA preallocation to 384MB,
-------------------------------------------------------------------
Tue Jan 31 02:05:57 UTC 2017 - stefan.bruens@rwth-aachen.de
- Only tear down own loopdevs, otherwise later losetup -d calls
(during the script and back in kiwi itself) will fail.
- Mount correct loopdev for DTB copying.
-------------------------------------------------------------------
Sat Jan 28 21:16:53 UTC 2017 - xxxxxmichl@googlemail.com
- Add DE0-nano-SoC board support
-------------------------------------------------------------------
Sat Jan 28 16:32:34 UTC 2017 - stefan.bruens@rwth-aachen.de
- Copy DTBs to boot partition in case it is separate to the root fs.
-------------------------------------------------------------------
Sat Jan 28 01:21:54 UTC 2017 - stefan.bruens@rwth-aachen.de
- Cleanup, make change of directory scope more visible
-------------------------------------------------------------------
Fri Jan 20 23:30:29 UTC 2017 - agraf@suse.com
- Add USB support during initrd on RPi (allows boot from USB)
- Add console=tty0 as secondary console for JeOS on rpi3
-------------------------------------------------------------------
Tue Jan 17 22:57:33 UTC 2017 - stefan.bruens@rwth-aachen.de
- Mark /var/log/journal as no-COW
-------------------------------------------------------------------
Tue Jan 17 22:39:25 UTC 2017 - stefan.bruens@rwth-aachen.de
- Correct whitespace, indentation was partially wrong, and one
Here Document EOF marker was not detected.
-------------------------------------------------------------------
Tue Jan 17 13:59:23 UTC 2017 - agraf@suse.com
- Disable systemd-firstboot (boo#1020019)
-------------------------------------------------------------------
Tue Jan 17 10:43:16 UTC 2017 - dmueller@suse.com
- clean up white space issues
-------------------------------------------------------------------
Mon Jan 16 23:03:40 UTC 2017 - agraf@suse.com
- Enable CMA on RPi3 and reduce swiotlb size (boo#1020021)
-------------------------------------------------------------------
Mon Jan 16 01:12:26 UTC 2017 - stefan.bruens@rwth-aachen.de
- Fix EFI detection for KIWI-ng
-------------------------------------------------------------------
Sat Jan 14 21:53:10 UTC 2017 - dmueller@suse.com
- force software I/O MMU for RPi3
-------------------------------------------------------------------
Fri Jan 13 18:13:01 UTC 2017 - dmueller@suse.com
- Tag X11 images as graphical
- Disable KMS for RPi3 as a temporary workaround
-------------------------------------------------------------------
Fri Jan 13 09:55:15 UTC 2017 - guillaume@opensuse.org
- Sabrelite: re-add imx_ipuv3_crtc to list of modules to load
-------------------------------------------------------------------
Thu Jan 12 20:03:39 UTC 2017 - dmueller@suse.com
- cleanup module loading for rpi3
- disable HDMI hotplug
-------------------------------------------------------------------
Mon Jan 9 16:57:15 UTC 2017 - afaerber@suse.de
- uboot-image-install.in: Add support for Marvell SPL
-------------------------------------------------------------------
Mon Jan 9 13:09:11 UTC 2017 - afaerber@suse.de
- uboot-image-install.in: Prepare for unified imx6-spl.bin
-------------------------------------------------------------------
Sun Jan 8 15:19:45 UTC 2017 - afaerber@suse.de
- Switch cubieboard2, cubietruck, bananapi to lpae kernel
- uboot-image-setup.in: Fold sunxi cases together, rely on U-Boot
- contribs: Drop a leftover raspberrypi3_aarch64, sort alphabetically
- Add nanopineo
- config.sh: Fix raspberrypi3 drm config
-------------------------------------------------------------------
Fri Jan 6 17:10:26 UTC 2017 - tbechtold@suse.com
- Install bcm43xx-firmware package for cubox-i. It's
needed to get wifi working.
-------------------------------------------------------------------
Mon Jan 2 14:57:35 UTC 2017 - dmueller@suse.com
- add temporary workaround by disabling btrfs for those flavors
that use EFI and use the u-boot integration due to missing
dtb files on the /boot partition.
-------------------------------------------------------------------
Mon Jan 2 14:08:05 UTC 2017 - dmueller@suse.com
- include gsettings-backend-dconf (bsc#1013801)
-------------------------------------------------------------------
Mon Jan 2 13:50:32 UTC 2017 - dmueller@suse.com
- remove host-specific files from image so that usage tracking works (bsc#1016660)
-------------------------------------------------------------------
Wed Nov 23 14:16:52 UTC 2016 - dmueller@suse.com
- don't install twm so that the graphical login actually chooses
the preconfigured window manager by default
-------------------------------------------------------------------
Wed Nov 23 10:25:35 UTC 2016 - fvogt@suse.com
- Add grub2-branding-openSUSE for themed GRUB2 menu
-------------------------------------------------------------------
Tue Nov 15 13:22:11 UTC 2016 - agraf@suse.com
- Use new _multibuild feature in OBS
- Add OBS-Exclusivearch
- Move contrib list into its own file
- Drop "quiet" from first boot
- Remove efikamx flavor
-------------------------------------------------------------------
Fri Nov 11 21:27:27 UTC 2016 - dmueller@suse.com
- add X11 image types
- create subvolumes for btrfs images
- remove mustang and thunderx flavor leftovers
- move EFI images to btrfs
- Rename raspberrypi3_aarch64 to raspberrypi3.aarch64, drop armv7 variant
-------------------------------------------------------------------
Wed Nov 9 16:33:21 UTC 2016 - dmueller@suse.com
- set loglevel=3 on kernel cmdline
-------------------------------------------------------------------
Sun Nov 6 23:31:02 UTC 2016 - schwab@suse.de
- replace NetworkManager-gnome by NetworkManager-applet
-------------------------------------------------------------------
Mon Oct 31 13:32:30 UTC 2016 - schwab@suse.de
- remove obsolete bits from config.sh
-------------------------------------------------------------------
Sun Oct 30 19:25:35 UTC 2016 - dmueller@suse.com
- drop thunderx flavor, use efi-aarch64 instead
-------------------------------------------------------------------
Sun Oct 30 19:24:44 UTC 2016 - dmueller@suse.com
- switch to use prj config provided repositories instead of explicit
listing
-------------------------------------------------------------------
Tue Oct 25 14:19:43 UTC 2016 - guillaume@opensuse.org
- remove imx_ipuv3_crtc from list of modules to load since it is
now auto-loaded
-------------------------------------------------------------------
Tue Oct 25 11:56:03 UTC 2016 - guillaume@opensuse.org
- Fix Beagleboard second boot by adding 'omap_dma' module to dracut
initrd
-------------------------------------------------------------------
Tue Oct 18 18:28:43 UTC 2016 - afaerber@suse.de
- Ensure that gdisk is available for firstboot on GPT (Marcus)
* Drop gptfdisk from EXTRA_PACKAGES for any USE_EFI images and
enforce adding it in packagelist.inc
* chromebook: Switch from PKG_TAG to PKG_BOOT_TAG
-------------------------------------------------------------------
Mon Oct 17 23:01:33 UTC 2016 - afaerber@suse.de
- raspberrypi{,2,3}: Switch to EFI
- raspberrypi*: Consistently handle console=
- raspberrypi2: Enable X11 modesetting
-------------------------------------------------------------------
Sat Oct 15 10:55:19 UTC 2016 - afaerber@suse.de
- Blacklist vc4 for raspberrypi aka rpi1 (boo#996614)
- Prepare for sdhci-iproc in kernel 4.8
- Switch to dtb-broadcom for raspberrypi3_aarch64 (boo#989713)
* Handle bcm2835-sdhost and prepare omitting sdhci-iproc
- Remove unused /etc/sysconfig/kernel leftovers
* Clean up a propagating whitespace nit while at it
-------------------------------------------------------------------
Wed Oct 12 14:36:02 UTC 2016 - guillaume@opensuse.org
- Use u-boot-rpi332b for RPi3 32 bits version instead of
u-boot-rpi2
-------------------------------------------------------------------
Mon Oct 10 07:25:20 UTC 2016 - dmueller@suse.com
- install bcm43xx-firmware for rpi3 as well
-------------------------------------------------------------------
Mon Oct 10 02:27:11 UTC 2016 - afaerber@suse.de
- Replace firmware-pine64 with new pine64-firmware
-------------------------------------------------------------------
Sat Oct 8 13:12:50 UTC 2016 - afaerber@suse.de
- Preinstall bcm43xx-firmware for cubietruck and aarch64 raspberrypi3
-------------------------------------------------------------------
Thu Oct 6 13:15:25 UTC 2016 - fvogt@suse.com
- Support new pine64.img from firmware-pine64
- Add 'fixed' module to dracut conf on sunxi targets
- Remove dtb-allwinner as the u-boot supplied DT works
-------------------------------------------------------------------
Tue Sep 27 16:44:28 UTC 2016 - dmueller@suse.com
- add workaround for extX filesystems with 64bit mode (bsc#989284)
-------------------------------------------------------------------
Sat Sep 24 12:44:02 UTC 2016 - dmueller@suse.com
- resolve have-choices
-------------------------------------------------------------------
Mon Sep 19 13:47:07 UTC 2016 - guillaume@opensuse.org
- Fix i.MX6 sabrelite boot
-------------------------------------------------------------------
Fri Sep 16 00:53:24 UTC 2016 - afaerber@suse.de
- Use UTC date as version number
- Don't strip crypto modules on aarch64, we need ablk_helper.ko
-------------------------------------------------------------------
Sun Sep 11 14:35:44 UTC 2016 - afaerber@suse.de
- Unify handling of raspberrypi3 and raspberrypi3_aarch64 flavors
so that we can name an upstream based aarch64 image raspberrypi3.
In particular the pre_checkin.sh and Images.kiwi.in logic is
changed, with IS_FLAVOR_raspberrypi3 being amended with
&& !IS_ARCH_aarch64, and IS_FLAVOR_raspberrypi3 becoming
IS_FLAVOR_raspberrypi3 && IS_ARCH_aarch64. Files names and .kiwi
files are left identical by special-casing this flavor and by
introducing a $format_type variable based on $format.
Build- and runtime script choices, such as adding a Contrib repo,
are still made based on the full image name.
* Limit the choice of $fdtfile to the downstream rpi2 kernel,
as done for raspberrypi2.
-------------------------------------------------------------------
Sat Sep 10 19:08:28 UTC 2016 - afaerber@suse.de
- Update hikey to use new dtb-hisilicon package
-------------------------------------------------------------------
Sat Sep 10 17:06:31 UTC 2016 - afaerber@suse.de
- Switch raspberrypi2 to upstream kernel (still experimental)
-------------------------------------------------------------------
Wed Sep 7 09:46:03 UTC 2016 - schwab@suse.de
- Revert last change
-------------------------------------------------------------------
Tue Sep 6 12:02:39 UTC 2016 - guillaume@opensuse.org
- Add cdrtools-cdrkit-compat for all flavours and remove
cdrkit-cdrtools-compat and genisoimage
-------------------------------------------------------------------
Mon Sep 5 10:53:39 UTC 2016 - dmueller@suse.com
- add trailing whitespace for add_drivers dracut config files
-------------------------------------------------------------------
Fri Aug 19 22:17:48 UTC 2016 - schwab@suse.de
- Remove ConsoleKit-x11
-------------------------------------------------------------------
Mon Aug 15 18:04:26 UTC 2016 - dmueller@suse.com
- set displayname for all images to avoid bugs with long
paths in firmware (bsc#993401)
-------------------------------------------------------------------
Sun Aug 14 08:03:24 UTC 2016 - schwab@suse.de
- Replace gnome-games by its split off packages
-------------------------------------------------------------------
Sun Aug 14 07:44:10 UTC 2016 - schwab@suse.de
- xfce4-terminal no longer provides Terminal
-------------------------------------------------------------------
Fri Jul 22 12:12:07 UTC 2016 - guillaume@opensuse.org
- LXQT image: Fix "have choixe" by replacing
kdebase4-runtime-branding-openSUSE by kdebase4-openSUSE
-------------------------------------------------------------------
Fri Jul 22 09:33:58 UTC 2016 - guillaume@opensuse.org
- Raspberry Pi: Flag 1st partition as (legacy) bootable
-------------------------------------------------------------------
Fri Jul 22 08:51:37 UTC 2016 - guillaume@opensuse.org
- Raspberry Pi: replace raspberrypi-firmware-branding-openSUSE package
by raspberrypi-firmware-config-rpi{,2,3}
-------------------------------------------------------------------
Fri Jul 22 07:17:32 UTC 2016 - guillaume@opensuse.org
- chromebook: remove mrvl-firmware package since it is now in
kernel-firmware package
-------------------------------------------------------------------
Thu Jul 21 11:57:52 UTC 2016 - guillaume@opensuse.org
- Fix chromebook 2nd boot
-------------------------------------------------------------------
Wed Jul 20 14:39:53 UTC 2016 - guillaume@opensuse.org
- Use KERNEL_CMDLINE_GFX for LXQT images
-------------------------------------------------------------------
Wed Jul 20 12:38:55 UTC 2016 - guillaume@opensuse.org
- Switch from u-boot-am335xevm to u-boot-am335xboneblack for
beaglebone image
-------------------------------------------------------------------
Fri Jul 15 11:01:50 UTC 2016 - dmueller@suse.com
- remove extra whitespace in package names
-------------------------------------------------------------------
Sun Jul 10 07:49:12 UTC 2016 - agraf@suse.com
- Fix up gdisk paths for install/firstboot times
-------------------------------------------------------------------
Tue Jun 28 06:26:58 UTC 2016 - agraf@suse.com
- Add x86_64 JeOS image descriptions
-------------------------------------------------------------------
Sun Jun 12 18:28:48 UTC 2016 - agraf@suse.com
- Use kms xorg driver on 64bit rpi3
- Fix loopdev unmapping with kpartx
- Add rpi3 aarch64 contrib as zypper repo
-------------------------------------------------------------------
Thu Jun 9 09:20:13 UTC 2016 - dmueller@suse.com
- set up some more sensible defaults to make it yast2-image compatible
-------------------------------------------------------------------
Fri Jun 3 08:34:12 UTC 2016 - agraf@suse.com
- merge preCallInit.sh and uboot-image-setup.in
-> reinstall SPL / U-Boot on first boot
- convert GPT to MBR on systems where SPL overlaps with GPT
- use "Image" and "booti" on AArch64 boot.scr systems
- move rpi3 aarch64 to efi
- use ttyS0 for rpi3
- strip initrd even more
-------------------------------------------------------------------
Sat May 28 12:17:38 UTC 2016 - schwab@suse.de
- Remove libfreerdp-plugins
-------------------------------------------------------------------
Wed May 25 12:12:11 UTC 2016 - dmueller@suse.com
- use snapshots for btrfs images
-------------------------------------------------------------------
Wed May 25 10:52:55 UTC 2016 - dmueller@suse.com
- include u-boot for raspberrypi3_aarch64
-------------------------------------------------------------------
Wed May 4 23:54:17 UTC 2016 - dmueller@suse.com
- updates for raspberrypi3_aarch64
-------------------------------------------------------------------
Fri Apr 22 12:16:43 UTC 2016 - agraf@suse.com
- Don't include ubot-setup-flavor.tgz for rootfs images, as we don't
generate the tgz for them
-------------------------------------------------------------------
Fri Apr 22 07:13:28 UTC 2016 - dmueller@suse.com
- add ca-certificates to JeOS
-------------------------------------------------------------------
Tue Apr 19 08:49:41 UTC 2016 - agraf@suse.com
- Always include uboot-setup-flavor.tgz to ensure we have the scriptlet
that removes rootflags=size=100% from the grub configuration
-------------------------------------------------------------------
Mon Apr 18 08:01:06 UTC 2016 - dmueller@suse.com
- further work on efi-devel flavor
-------------------------------------------------------------------
Sun Apr 17 18:19:57 UTC 2016 - dmueller@suse.com
- add efi-devel aarch64 flavor
- add net-tools-deprecated to all images
-------------------------------------------------------------------
Fri Apr 15 09:09:17 UTC 2016 - dmueller@suse.com
- add raspberrypi3_aarch64 flavor
-------------------------------------------------------------------
Wed Apr 6 07:50:57 UTC 2016 - dmueller@suse.com
- generate kiwi 8.x compatible kiwi hooks
-------------------------------------------------------------------
Fri Apr 1 01:01:54 UTC 2016 - agraf@suse.com
- Use uname for generic zypper repo determination
-------------------------------------------------------------------
Fri Apr 1 00:41:24 UTC 2016 - agraf@suse.com
- Move non-Uboot firstboot scripts to preCallInit.sh
- This fixes EFI images that depend on firstboot scripts, which
means all by now because of the rootflags replacement
-------------------------------------------------------------------
Thu Mar 31 08:07:52 UTC 2016 - schwab@suse.de
- Properly clean up after kpartx in uboot-image-*-install
-------------------------------------------------------------------
Tue Mar 29 22:31:55 UTC 2016 - agraf@suse.com
- Minor pine64 fixes
- Shrink GPT on sunxi systems to make space for SPL
-------------------------------------------------------------------
Tue Mar 29 19:38:59 UTC 2016 - dmueller@suse.com
- fix have-choices for the last tumbleweed updates
-------------------------------------------------------------------
Fri Mar 25 19:58:25 UTC 2016 - dmueller@suse.com
- include brmfmac firmware for RPi 3
-------------------------------------------------------------------
Thu Mar 24 10:49:58 UTC 2016 - agraf@suse.com
- Remove mustang flavor
- Move m400 flavor to JeOS only
- Move to a new naming schema where "-pxe" images build with pxe
- Move m400 -> m400-pxe
- Move midway -> midway-pxe
- Remove highbank (hardware obsolete)
- Remove hip04d01 (unmaintained)
- Remove hip05d02 (upstream by now)
- Move efi.aarch64 to non-pxe
- Add efi-pxe.aarch64 flavor with JeOS only
-------------------------------------------------------------------
Wed Mar 9 14:13:46 UTC 2016 - guillaume@opensuse.org
- Auto load useful modules not auto-loaded for SabreLite:
* Fix HDMI output
* Make use of (imx6q-)cpufreq
-------------------------------------------------------------------
Wed Mar 9 09:29:35 UTC 2016 - agraf@suse.com
- Add pine64 contrib description
-------------------------------------------------------------------
Mon Mar 7 10:20:10 UTC 2016 - guillaume@opensuse.org
- Fix bootargs on 1st boot for Raspberry Pi 1, 2 and 3. (downstream
kernels only)
-------------------------------------------------------------------
Mon Mar 7 10:14:24 UTC 2016 - guillaume@opensuse.org
- Make use of bootkernel var also in scripts in compressed archives
-------------------------------------------------------------------
Fri Mar 4 15:18:25 UTC 2016 - agraf@suse.com
- Change date to YYYY.MM.DD instead (seems more readable)
-------------------------------------------------------------------
Fri Mar 4 09:32:09 UTC 2016 - agraf@suse.com
- move panda target to efi based boot
-------------------------------------------------------------------
Fri Mar 4 00:44:24 UTC 2016 - agraf@suse.com
- Change date to YYYYMMDD.0.0 to make kiwi's version format check happy
-------------------------------------------------------------------
Thu Mar 3 18:11:02 UTC 2016 - dmueller@suse.com
- fix raspberrypi3 flavor
- use date of changelog entry for image version
-------------------------------------------------------------------
Thu Mar 3 15:41:24 UTC 2016 - guillaume@opensuse.org
- Make use of bootkernel var in uboot-image*
-------------------------------------------------------------------
Tue Mar 1 07:37:07 UTC 2016 - agraf@suse.com
- add rootflags=size=100% to have tmpfs span all ram
- allows for bigger initramfs
- strip rootflags=size=100% from kernel cmdline after firstboot
- move firstboot uboot install script to separate file
- add update-bootloader --reinit for arm efi to regenerate bootarm.efi
-------------------------------------------------------------------
Mon Feb 29 23:34:55 UTC 2016 - agraf@suse.com
- put u-boot directly on the SD card at a hard offset on omap
this makes it easier to move to efi
- move beagle* targets to efi based boot
-------------------------------------------------------------------
Mon Feb 29 15:27:47 UTC 2016 - dmueller@suse.com
- add raspberrypi3 flavor
-------------------------------------------------------------------
Mon Feb 29 13:04:57 UTC 2016 - dmueller@suse.com
- remove stripKernel call again which breaks symlink for rebooting
-------------------------------------------------------------------
Thu Feb 25 15:17:29 UTC 2016 - guillaume@opensuse.org
- Raspberrypi:
* Use u-boot defined fdtfile when upstream kernel is used (u-boot
and upstream kernel are now in sync)
* Update u-boot script for the new downstream kernel
* Fix bootargs when downstream kernel is used
-------------------------------------------------------------------
Sat Feb 20 19:18:31 UTC 2016 - dmueller@suse.com
- strip kernel/firmware in initrd
- add DTB for vexpress flavor
- don't strip qemu-cputype-armv6
-------------------------------------------------------------------
Wed Feb 17 12:30:14 UTC 2016 - guillaume@opensuse.org
- Add missing TYPE_LXQT image type definition
-------------------------------------------------------------------
Wed Feb 17 10:04:32 UTC 2016 - guillaume@opensuse.org
- replace ttyO* by ttyS* for omap boards (panda, beagle and beaglebone)
- Keep console on serial for panda and beagle graphical images
-------------------------------------------------------------------
Mon Feb 15 13:18:38 UTC 2016 - dmueller@suse.com
- rename E17-* to E20-*
-------------------------------------------------------------------
Thu Feb 11 07:58:09 UTC 2016 - dmueller@suse.com
- fix multiple-choices for yast2 dependencies
-------------------------------------------------------------------
Thu Feb 4 20:25:30 UTC 2016 - dmueller@suse.com
- relocate initrd for raspberrypi as well
-------------------------------------------------------------------
Wed Feb 3 16:26:12 UTC 2016 - dmueller@suse.com
- remove ohci from arndale image, remove phy-samsung* (was renamed to phy-exynos-*)
-------------------------------------------------------------------
Wed Feb 3 09:54:57 UTC 2016 - guillaume@opensuse.org
- Chromebook: Fix kpartx loop device detection
-------------------------------------------------------------------
Sun Jan 31 20:00:50 UTC 2016 - dmueller@suse.com
- unset initrd_high for RaspberryPi 2 to fix boot
issue (does not support inplace/zero-copy initrd booting)
- set quiet to bootopts to remove annoying audit log on console
-------------------------------------------------------------------
Wed Jan 27 14:47:36 UTC 2016 - dmueller@suse.com
- set skip-verify=true
-------------------------------------------------------------------
Fri Jan 22 12:53:57 UTC 2016 - guillaume@opensuse.org
- Add 'bootkernel="custom"' to kiwi config file to only use wanted
kernel, not kernel-default. (Fix non -default kernel initrd and
boot, such as -lpae)
-------------------------------------------------------------------
Mon Jan 18 02:25:45 UTC 2016 - agraf@suse.com
- Remove rootfstype=ramfs again. Kiwi passes that after firstboot into the
boot parameters of the installed system, overriding dracut's fs detection,
hence making every second-boot mount the rootfs as fstype=ramfs, breaking
the boot...
-------------------------------------------------------------------
Wed Jan 13 03:10:48 UTC 2016 - agraf@suse.com
- Add hikey (Contrib) description
-------------------------------------------------------------------
Wed Jan 13 01:37:21 UTC 2016 - agraf@suse.com
- add rootfstype=ram to all kernel command lines, it's needed for
the firstboot initrd on low ram systems (<2GB for aarch64)
-------------------------------------------------------------------
Tue Jan 12 10:41:11 UTC 2016 - guillaume@opensuse.org
- Do not define 'target' variable in u-boot script (fix cubox-i)
-------------------------------------------------------------------
Wed Dec 23 04:26:22 UTC 2015 - afaerber@suse.de
- Partially revert last change for raspberrypi2
* $bootkernel is unexpectedly not rpi2, comment out the condition
- Apply bootable partition change for Raspberry Pi on firstboot, too
-------------------------------------------------------------------
Tue Dec 22 22:58:02 UTC 2015 - afaerber@suse.de
- kernel-rpi2 does use FDT (by now?)
* Tidy up raspberrypi[2] bootargs while at it
-------------------------------------------------------------------
Tue Dec 22 21:31:43 UTC 2015 - afaerber@suse.de
- Mark second partition bootable also in GPT for Raspberry Pi
* Change the partition name while at it (it's not UEFI)
-------------------------------------------------------------------
Tue Dec 22 04:13:14 UTC 2015 - afaerber@suse.de
- Drop duplicate FAT formatting and file copying for Raspberry Pi
-------------------------------------------------------------------
Sun Dec 20 19:24:33 UTC 2015 - afaerber@suse.de
- Add audit to package list (avoids kernel spam on serial console)
- Mark the second partition bootable for Raspberry Pi.
Recent U-Boot versions check this for determining which partitions
to search extlinux.conf and boot.scr files on.
* Drop obsolete boot.scr on first partition.
Will slightly speed up boot and simplifies JeOS scripts.
- raspberrypi-firmware files are now in /boot/vc
* u-boot-rpi and u-boot-rpi2 files are not yet, conditionalize them
- Include raspberrypi-firmware-branding-openSUSE
* Drop ad-hoc Config.txt generation
-------------------------------------------------------------------
Thu Dec 10 15:57:30 UTC 2015 - dmueller@suse.com
- blacklist xhci_hcd for Arndale boards
-------------------------------------------------------------------
Mon Dec 7 15:17:12 UTC 2015 - agraf@suse.com
- Remove pihwm from Raspberry Pi package list (auxiliary package)
-------------------------------------------------------------------
Mon Dec 7 12:46:59 UTC 2015 - afaerber@suse.de
- Drop Contrib repo for Raspberry Pi (requested by Alex)
- Fix typo in output
-------------------------------------------------------------------
Sat Dec 5 11:07:47 UTC 2015 - cyberorg@opensuse.org
- Use branding-openSUSE for all images
-------------------------------------------------------------------
Fri Nov 27 19:27:41 UTC 2015 - schwab@suse.de
- use oemboot/suse-tumbleweed boot description
- include MozillaFirefox for all archs
-------------------------------------------------------------------
Wed Nov 25 11:41:05 UTC 2015 - dmueller@suse.com
- add oxygen5-icon-theme to resolve choice for E17
-------------------------------------------------------------------
Tue Nov 17 12:52:24 UTC 2015 - dmueller@suse.com
- add irqbalance for thunderx and efi images
-------------------------------------------------------------------
Thu Nov 12 11:37:20 UTC 2015 - mbrugger@suse.com
- fix URL for contrib:thunderx repository
-------------------------------------------------------------------
Thu Nov 12 09:27:56 UTC 2015 - dmueller@suse.com
- fix update repositories for thunderx image
-------------------------------------------------------------------
Wed Oct 28 14:40:00 UTC 2015 - dmueller@suse.com
- reinclude irqbalance for cuboxi
-------------------------------------------------------------------
Thu Oct 22 13:29:04 UTC 2015 - guillaume@opensuse.org
- cuboxi: u-boot: upstream u-boot uses findfdt cmd instead of
autodetectfdt
-------------------------------------------------------------------
Wed Oct 21 08:34:07 UTC 2015 - tbechtold@suse.com
- cuboxi:
* copy u-boot.img at correct address
(see u-boot git tree board/solidrun/mx6cuboxi/README)
* install u-boot-mx6cuboxi instead of u-boot-mx6cubox-i
* don't install irqbalance
* remove contrib repository
-------------------------------------------------------------------
Tue Oct 20 18:38:23 UTC 2015 - dmueller@suse.com
- switch cuboxi to standard kernel/u-boot
-------------------------------------------------------------------
Fri Oct 16 08:18:51 UTC 2015 - guillaume@opensuse.org
- Rpi/Rpi2: pass MAC addr to Linux
-------------------------------------------------------------------
Wed Oct 14 08:06:31 UTC 2015 - guillaume@opensuse.org
- Rework ${fdtfile} usage by adding ${fdtfolder}. This allow to use
default ${fdtfile} definitions from upstream u-boot.
-------------------------------------------------------------------
Wed Oct 7 09:06:02 UTC 2015 - guillaume@opensuse.org
- Fix boot on Beagleboard xM
-------------------------------------------------------------------
Mon Sep 28 09:46:11 UTC 2015 - guillaume@opensuse.org
- Replace libyui-qt-pkg6 by libyui-qt-pkg7
-------------------------------------------------------------------
Mon Sep 28 08:36:33 UTC 2015 - guillaume@opensuse.org
- Odroid:
* Use 'load' command, since ext2load is not available
* Add kernel, fdt and initrd addresses.
-------------------------------------------------------------------
Mon Sep 28 08:36:01 UTC 2015 - guillaume@opensuse.org
- Add libsystemd0 to package list (have choice with libsystemd0-mini)
-------------------------------------------------------------------
Sat Sep 5 13:30:44 UTC 2015 - guillaume@opensuse.org
- Add drivers/pwm/* to initrd for Chromebook to get display working
on 1st boot
-------------------------------------------------------------------
Fri Sep 4 11:02:43 UTC 2015 - dmueller@suse.com
- add JeOS-thunderx, rename from *-thunder
-------------------------------------------------------------------
Thu Sep 3 20:22:10 UTC 2015 - matwey.kornilov@gmail.com
- Set explicit baudrate to console for OMAP serial.
-------------------------------------------------------------------
Wed Sep 2 16:55:35 UTC 2015 - guillaume@opensuse.org
- Add odroid and odroidxu3 support
-------------------------------------------------------------------
Tue Sep 1 13:29:25 UTC 2015 - guillaume@opensuse.org
- Fix force load of modules needed to get display working fine on
chromebook
-------------------------------------------------------------------
Thu Aug 27 14:39:43 UTC 2015 - guillaume@opensuse.org
- Fix corrupted script in cgpt-table-update.tgz
-------------------------------------------------------------------
Mon Aug 17 23:21:16 UTC 2015 - zombah@gmail.com
- Add serial console output cmdline for Chromebook
-------------------------------------------------------------------
Mon Aug 17 13:04:24 UTC 2015 - guillaume@opensuse.org
- Force load of modules needed to get display working fine on chromebook
-------------------------------------------------------------------
Mon Aug 17 09:18:54 UTC 2015 - guillaume@opensuse.org
- Fix Chromebook boot with latest u-boot (u-boot now looks for
bootscripts on bootable partitions only, so flag it bootable)
-------------------------------------------------------------------
Thu Aug 6 16:02:29 UTC 2015 - matwey.kornilov@gmail.com
- Add ${append} to bootargs u-boot env variable in boot.srcipt
This is done to be consistent with KIWI
-------------------------------------------------------------------
Mon Aug 03 15:01:00 UTC 2015 - josua.mayer97@gmail.com
- Add IMX& Contrib repo to Cubox-i images
- boot cubox-i JeOS images to serial console only, graphical ones to the screen
-------------------------------------------------------------------
Tue Jun 30 06:46:23 UTC 2015 - agraf@suse.com
- Add HIP05D02 Contrib
-------------------------------------------------------------------
Tue Jun 16 14:26:14 UTC 2015 - guillaume@opensuse.org
- Fix beagleboard xM boot when validatefdt is run in u-boot script
-------------------------------------------------------------------
Tue Jun 16 10:15:09 UTC 2015 - agraf@suse.com
- use btrfs on EFI AArch64 systems
-------------------------------------------------------------------
Mon Jun 15 15:37:45 UTC 2015 - guillaume@opensuse.org
- 'sudo' package now available for JeOS images too.
-------------------------------------------------------------------
Mon Jun 15 15:27:51 UTC 2015 - guillaume@opensuse.org
- BeagleBone Black: Enable boot on internal eMMC if external uSD
fails
-------------------------------------------------------------------
Sun Jun 14 19:24:56 UTC 2015 - dmueller@suse.com
- switch to tumbleweed download links
-------------------------------------------------------------------
Thu Jun 11 20:17:57 UTC 2015 - guillaume@opensuse.org
- Add tda998x module in config.sh for beaglebone (black) to fix
HDMI output
-------------------------------------------------------------------
Thu Jun 11 08:23:20 UTC 2015 - guillaume@opensuse.org
- Add new packages:
* which
* yast2-firewall
- Wireless packages (wireless-tools, wpa_supplicant) and SuSEfirewall2
are now also available for JeOS too
- Remove OMAP DSP related packages since support has been dropped
from kernel
- Enlightenment packages updates (e17 => e19):
* Replace e17 by enlightenment
* Replace e17-theme-openSUSE by enlightenment-theme-openSUSE
* Replace e17-branding-openSUSE by enlightenment-branding-openSUSE
-------------------------------------------------------------------
Sat May 16 12:54:29 CEST 2015 - xxxxxmichl@googlemail.com
- add support for more Olimex boards.
-------------------------------------------------------------------
Wed Apr 29 21:33:38 UTC 2015 - agraf@suse.com
- remove seattle flavor, efi should cover it now
- move to pure console=ttyAMA0 for efi flavor, only mustang needs ttyS0
- move efi flavor to PXE enabled
-------------------------------------------------------------------
Sat Apr 11 21:00:52 UTC 2015 - agraf@suse.com
- rpi2: Enable hybrid GPT recovery on firstboot
-------------------------------------------------------------------
Thu Apr 9 20:04:16 UTC 2015 - agraf@suse.com
- rpi2: Add rpi2 repo to repo list in installed systems
-------------------------------------------------------------------
Wed Mar 25 19:50:58 UTC 2015 - agraf@suse.com
- m400: Use enp1s0 as eth name
-------------------------------------------------------------------
Wed Mar 25 19:01:03 UTC 2015 - agraf@suse.com
- Add HP m400 Cartridge Contrib support
-------------------------------------------------------------------
Mon Mar 23 17:12:32 UTC 2015 - agraf@suse.com
- Remove mustang contrib repo
-------------------------------------------------------------------
Fri Mar 13 11:02:18 UTC 2015 - guillaume@opensuse.org
- Update post-install script (cgpt kiwi hook) to fix Chromebook
2nd boot
-------------------------------------------------------------------
Thu Feb 26 19:26:06 UTC 2015 - xxxxxmichl@googlemail.com
- add graphics support for Olimex A10-OLinuXino-LIME and
A20-OLinuXIno-LIME2 boards.
-------------------------------------------------------------------
Thu Feb 26 14:59:26 UTC 2015 - guillaume@opensuse.org
- Add more modules to first initrd
-------------------------------------------------------------------
Thu Feb 26 14:50:03 UTC 2015 - guillaume@opensuse.org
- Add modules (ahci and drm) to initrd for SabreLite (in config.sh)
-------------------------------------------------------------------
Thu Feb 26 14:01:20 UTC 2015 - guillaume@opensuse.org
- Add splash screen support in u-boot (enabled and tested on SabreLite)
-------------------------------------------------------------------
Tue Feb 24 09:56:58 UTC 2015 - guillaume@opensuse.org
- Remove redundant 'bootype=bootz' in uboot-image-setup.in
since it is the default value.
-------------------------------------------------------------------
Mon Feb 16 09:03:32 UTC 2015 - guillaume@opensuse.org
- Enhance exynos boards initrd (Chromebook and arndale)
-------------------------------------------------------------------
Mon Feb 16 09:00:27 UTC 2015 - guillaume@opensuse.org
- Rename u-boot-rpib to u-boot-rpi
-------------------------------------------------------------------
Fri Dec 19 19:26:06 UTC 2014 - xxxxxmichl@googlemail.com
- add support for Olimex A10-OLinuXino-LIME and A20-OLinuXIno-LIME2
boards.
-------------------------------------------------------------------
Sun Dec 7 23:05:06 UTC 2014 - agraf@suse.com
- disable firstboot, it's been broken in 90% of the cases where I
deployed an image
-------------------------------------------------------------------
Fri Dec 5 00:07:55 UTC 2014 - agraf@suse.com
- fix grub2 package name for 32bit efi
-------------------------------------------------------------------
Thu Dec 4 16:39:33 UTC 2014 - guillaume@opensuse.org
- chromebook: fix cgpt relative path (not in $PATH) in uboot image
install script
-------------------------------------------------------------------
Thu Dec 4 15:00:01 UTC 2014 - guillaume@opensuse.org
- chromebook: fix uboot image install script (fix path)
-------------------------------------------------------------------
Thu Dec 4 14:13:39 UTC 2014 - agraf@suse.com
- add hip04d01 target
-------------------------------------------------------------------
Thu Dec 4 09:37:32 UTC 2014 - guillaume@opensuse.org
- Chromebook update:
* switch from broken downstream kernel-chromebook to upstream kernel-lpae
* switch from downstream u-boot-chromebook to upstream u-boot-snow
* add missing initrd modules handling (in config.sh) for chromebook and
add USB modules for exynos boards (arndale and chromebook)
* update u-boot script (bootype, fs)
* Update cgpt-table-update.tgz to fix 2nd boot when booted from USB too
* add /etc/modules-load.d/cros-ec-keyb.conf to be able to use the keyboard
-------------------------------------------------------------------
Wed Dec 3 23:58:53 UTC 2014 - agraf@suse.com
- generate pxe files for thunder
- use "thunder" flavor for thunder
-------------------------------------------------------------------
Wed Nov 26 14:17:39 UTC 2014 - agraf@suse.com
- Add helper script to identify unlinked images
-------------------------------------------------------------------
Wed Nov 26 10:37:18 UTC 2014 - guillaume@opensuse.org
- LXQT image: switch from lightdm kde greeter to gtk greeter (fix X start)
-------------------------------------------------------------------
Tue Nov 25 15:12:39 UTC 2014 - guillaume@opensuse.org
- Run validatefdt in u-boot when available (for Beagleboard xM)
-------------------------------------------------------------------
Wed Nov 19 10:10:47 UTC 2014 - guillaume@opensuse.org
- Add LXQt as new desktop image
-------------------------------------------------------------------
Tue Nov 18 17:37:50 UTC 2014 - guillaume@opensuse.org
- Add JeOS.changes file to follow changes
