File 0002-arm64-dts-broadcom-Add-support-for-Rpi5-devicetree.patch of Package raspberrypi-firmware-dt
From 3205799f51f7c803324706ec66000e850af864c5 Mon Sep 17 00:00:00 2001
From: Andrea della Porta <andrea.porta@suse.com>
Date: Thu, 24 Apr 2025 16:49:32 +0300
Subject: [PATCH] arm64: dts: broadcom: Add support for Rpi5 devicetree
The devicetree for RaspberryPi 5 is taken from upstream.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
---
.../dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts | 121 ++++
.../boot/dts/broadcom/bcm2712-rpi-5-b.dts | 19 +-
arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 613 ++++++++++++++++++
arch/arm64/boot/dts/broadcom/rp1-common.dtsi | 71 ++
arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi | 14 +
.../clock/raspberrypi,rp1-clocks.h | 61 ++
include/dt-bindings/clock/rp1.h | 48 +-
7 files changed, 898 insertions(+), 49 deletions(-)
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/rp1-common.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi
create mode 100644 include/dt-bindings/clock/raspberrypi,rp1-clocks.h
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
new file mode 100644
index 0000000..6ea3c10
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "bcm2712.dtsi"
+
+/ {
+ compatible = "raspberrypi,5-model-b", "brcm,bcm2712";
+ model = "Raspberry Pi 5";
+
+ aliases {
+ serial10 = &uart10;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial10:115200n8";
+ };
+
+ clk_rp1_xosc: clock-50000000 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "rp1-xosc";
+ clock-frequency = <50000000>;
+ };
+
+ /* Will be filled by the bootloader */
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0 0 0x28000000>;
+ };
+
+ sd_io_1v8_reg: sd-io-1v8-reg {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd-sd-io";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-settling-time-us = <5000>;
+ gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>;
+ states = <1800000 1>,
+ <3300000 0>;
+ };
+
+ sd_vcc_reg: sd-vcc-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector
+ * labeled "UART", i.e. the interface with the system console.
+ */
+&uart10 {
+ status = "okay";
+};
+
+/* SDIO1 is used to drive the SD card */
+&sdio1 {
+ vqmmc-supply = <&sd_io_1v8_reg>;
+ vmmc-supply = <&sd_vcc_reg>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ sd-uhs-sdr104;
+};
+
+&soc {
+ firmware: firmware {
+ compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mboxes = <&mailbox>;
+ dma-ranges;
+
+ firmware_clocks: clocks {
+ compatible = "raspberrypi,firmware-clocks";
+ #clock-cells = <1>;
+ };
+
+ reset: reset {
+ compatible = "raspberrypi,firmware-reset";
+ #reset-cells = <1>;
+ };
+ };
+
+ power: power {
+ compatible = "raspberrypi,bcm2835-power";
+ firmware = <&firmware>;
+ #power-domain-cells = <1>;
+ };
+};
+
+&hvs {
+ clocks = <&firmware_clocks 4>, <&firmware_clocks 16>;
+ clock-names = "core", "disp";
+};
+
+&hdmi0 {
+ clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+ clock-names = "hdmi", "bvb", "audio", "cec";
+};
+
+&hdmi1 {
+ clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+ clock-names = "hdmi", "bvb", "audio", "cec";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index 1457e69..adad85e 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -1,2 +1,17 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "arm/broadcom/bcm2712-rpi-5-b.dts"
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * bcm2712-rpi-5-b-ovl-rp1.dts is the overlay-ready DT which will make
+ * the RP1 driver to load the RP1 dtb overlay at runtime, while
+ * bcm2712-rpi-5-b.dts (this file) is the fully defined one (i.e. it
+ * already contains RP1 node, so no overlay is loaded nor needed).
+ * This file is not intended to be modified, nodes should be added
+ * to the included bcm2712-rpi-5-b-ovl-rp1.dts.
+ */
+
+/dts-v1/;
+
+#include "bcm2712-rpi-5-b-ovl-rp1.dts"
+
+&pcie2 {
+ #include "rp1-nexus.dtsi"
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
new file mode 100644
index 0000000..0a9212d
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -0,0 +1,613 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "brcm,bcm2712";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-parent = <&gicv2>;
+
+ clocks {
+ /* The oscillator is the root of the clock tree. */
+ clk_osc: clk-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "osc";
+ clock-frequency = <54000000>;
+ };
+
+ clk_vpu: clk-vpu {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <750000000>;
+ clock-output-names = "vpu-clock";
+ };
+
+ clk_uart: clk-uart {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <9216000>;
+ clock-output-names = "uart-clock";
+ };
+
+ clk_emmc2: clk-emmc2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ clock-output-names = "emmc2-clock";
+ };
+ };
+
+ cpus: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Source for L1 d/i cache-line-size, cache-sets, cache-size
+ * https://developer.arm.com/documentation/100798/0401/L1-memory-system/About-the-L1-memory-system?lang=en
+ * Source for L2 cache-line-size and cache-sets:
+ * https://developer.arm.com/documentation/100798/0401/L2-memory-system/About-the-L2-memory-system?lang=en
+ * and for cache-size:
+ * https://www.raspberrypi.com/documentation/computers/processors.html#bcm2712
+ */
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x000>;
+ enable-method = "psci";
+ d-cache-size = <0x10000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ i-cache-size = <0x10000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ next-level-cache = <&l2_cache_l0>;
+
+ l2_cache_l0: l2-cache {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x100>;
+ enable-method = "psci";
+ d-cache-size = <0x10000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ i-cache-size = <0x10000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ next-level-cache = <&l2_cache_l1>;
+
+ l2_cache_l1: l2-cache {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x200>;
+ enable-method = "psci";
+ d-cache-size = <0x10000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ i-cache-size = <0x10000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ next-level-cache = <&l2_cache_l2>;
+
+ l2_cache_l2: l2-cache {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x300>;
+ enable-method = "psci";
+ d-cache-size = <0x10000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ i-cache-size = <0x10000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+ next-level-cache = <&l2_cache_l3>;
+
+ l2_cache_l3: l2-cache {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+ };
+
+ /* Source for cache-line-size and cache-sets:
+ * https://developer.arm.com/documentation/100453/0401/L3-cache?lang=en
+ * Source for cache-size:
+ * https://www.raspberrypi.com/documentation/computers/processors.html#bcm2712
+ */
+ l3_cache: l3-cache {
+ compatible = "cache";
+ cache-size = <0x200000>;
+ cache-line-size = <64>;
+ cache-sets = <2048>; // 2MiB(size)/64(line-size)=32768ways/16-way set
+ cache-level = <3>;
+ cache-unified;
+ };
+ };
+
+ psci {
+ method = "smc";
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ };
+
+ rmem: reserved-memory {
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ atf@0 {
+ reg = <0x0 0x0 0x0 0x80000>;
+ no-map;
+ };
+
+ cma: linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x4000000>; /* 64MB */
+ reusable;
+ linux,cma-default;
+ alloc-ranges = <0x0 0x00000000 0x0 0x40000000>;
+ };
+ };
+
+ soc: soc@107c000000 {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x10 0x00000000 0x80000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pcie_rescal: reset-controller@119500 {
+ compatible = "brcm,bcm7216-pcie-sata-rescal";
+ reg = <0x00119500 0x10>;
+ #reset-cells = <0>;
+ };
+
+ sdio1: mmc@fff000 {
+ compatible = "brcm,bcm2712-sdhci",
+ "brcm,sdhci-brcmstb";
+ reg = <0x00fff000 0x260>,
+ <0x00fff400 0x200>;
+ reg-names = "host", "cfg";
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_emmc2>;
+ clock-names = "sw_sdio";
+ mmc-ddr-3_3v;
+ };
+
+ bcm_reset: reset-controller@1504318 {
+ compatible = "brcm,brcmstb-reset";
+ reg = <0x01504318 0x30>;
+ #reset-cells = <1>;
+ };
+
+ system_timer: timer@7c003000 {
+ compatible = "brcm,bcm2835-system-timer";
+ reg = <0x7c003000 0x1000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <1000000>;
+ };
+
+ mailbox: mailbox@7c013880 {
+ compatible = "brcm,bcm2835-mbox";
+ reg = <0x7c013880 0x40>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <0>;
+ };
+
+ uart10: serial@7d001000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x7d001000 0x200>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_uart>, <&clk_vpu>;
+ clock-names = "uartclk", "apb_pclk";
+ arm,primecell-periphid = <0x00341011>;
+ status = "disabled";
+ };
+
+ interrupt-controller@7d517000 {
+ compatible = "brcm,bcm7271-l2-intc";
+ reg = <0x7d517000 0x10>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gio_aon: gpio@7d517c00 {
+ compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+ reg = <0x7d517c00 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ brcm,gpio-bank-widths = <17 6>;
+ /* The lack of 'interrupt-controller' property here is intended:
+ * don't use GIO_AON as an interrupt controller because it will
+ * clash with the firmware monitoring the PMIC interrupt via the VPU.
+ */
+ };
+
+ gicv2: interrupt-controller@7fff9000 {
+ compatible = "arm,gic-400";
+ reg = <0x7fff9000 0x1000>,
+ <0x7fffa000 0x2000>,
+ <0x7fffc000 0x2000>,
+ <0x7fffe000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ aon_intr: interrupt-controller@7d510600 {
+ compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+ reg = <0x7d510600 0x30>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ pixelvalve0: pixelvalve@7c410000 {
+ compatible = "brcm,bcm2712-pixelvalve0";
+ reg = <0x7c410000 0x100>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pixelvalve1: pixelvalve@7c411000 {
+ compatible = "brcm,bcm2712-pixelvalve1";
+ reg = <0x7c411000 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ mop: mop@7c500000 {
+ compatible = "brcm,bcm2712-mop";
+ reg = <0x7c500000 0x28>;
+ interrupt-parent = <&disp_intr>;
+ interrupts = <1>;
+ };
+
+ moplet: moplet@7c501000 {
+ compatible = "brcm,bcm2712-moplet";
+ reg = <0x7c501000 0x20>;
+ interrupt-parent = <&disp_intr>;
+ interrupts = <0>;
+ };
+
+ disp_intr: interrupt-controller@7c502000 {
+ compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+ reg = <0x7c502000 0x30>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ dvp: clock@7c700000 {
+ compatible = "brcm,brcm2711-dvp";
+ reg = <0x7c700000 0x10>;
+ clocks = <&clk_108MHz>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ ddc0: i2c@7d508200 {
+ compatible = "brcm,brcmstb-i2c";
+ reg = <0x7d508200 0x58>;
+ interrupt-parent = <&bsc_irq>;
+ interrupts = <1>;
+ clock-frequency = <97500>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ddc1: i2c@7d508280 {
+ compatible = "brcm,brcmstb-i2c";
+ reg = <0x7d508280 0x58>;
+ interrupt-parent = <&bsc_irq>;
+ interrupts = <2>;
+ clock-frequency = <97500>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ bsc_irq: interrupt-controller@7d508380 {
+ compatible = "brcm,bcm7271-l2-intc";
+ reg = <0x7d508380 0x10>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ main_irq: interrupt-controller@7d508400 {
+ compatible = "brcm,bcm7271-l2-intc";
+ reg = <0x7d508400 0x10>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ hdmi0: hdmi@7c701400 {
+ compatible = "brcm,bcm2712-hdmi0";
+ reg = <0x7c701400 0x300>,
+ <0x7c701000 0x200>,
+ <0x7c701d00 0x300>,
+ <0x7c702000 0x80>,
+ <0x7c703800 0x200>,
+ <0x7c704000 0x800>,
+ <0x7c700100 0x80>,
+ <0x7d510800 0x100>,
+ <0x7c720000 0x100>;
+ reg-names = "hdmi",
+ "dvp",
+ "phy",
+ "rm",
+ "packet",
+ "metadata",
+ "csc",
+ "cec",
+ "hd";
+ resets = <&dvp 1>;
+ interrupt-parent = <&aon_intr>;
+ interrupts = <1>, <2>, <3>,
+ <7>, <8>;
+ interrupt-names = "cec-tx", "cec-rx", "cec-low",
+ "hpd-connected", "hpd-removed";
+ ddc = <&ddc0>;
+ };
+
+ hdmi1: hdmi@7c706400 {
+ compatible = "brcm,bcm2712-hdmi1";
+ reg = <0x7c706400 0x300>,
+ <0x7c706000 0x200>,
+ <0x7c706d00 0x300>,
+ <0x7c707000 0x80>,
+ <0x7c708800 0x200>,
+ <0x7c709000 0x800>,
+ <0x7c700180 0x80>,
+ <0x7d511000 0x100>,
+ <0x7c720000 0x100>;
+ reg-names = "hdmi",
+ "dvp",
+ "phy",
+ "rm",
+ "packet",
+ "metadata",
+ "csc",
+ "cec",
+ "hd";
+ resets = <&dvp 2>;
+ interrupt-parent = <&aon_intr>;
+ interrupts = <11>, <12>, <13>,
+ <14>, <15>;
+ interrupt-names = "cec-tx", "cec-rx", "cec-low",
+ "hpd-connected", "hpd-removed";
+ ddc = <&ddc1>;
+ };
+ };
+
+ axi: axi {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x00 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+ <0x10 0x00000000 0x10 0x00000000 0x01 0x00000000>,
+ <0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>,
+ <0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>,
+ <0x1c 0x00000000 0x1c 0x00000000 0x04 0x00000000>;
+
+ dma-ranges = <0x00 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+ <0x10 0x00000000 0x10 0x00000000 0x01 0x00000000>,
+ <0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>,
+ <0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>,
+ <0x1c 0x00000000 0x1c 0x00000000 0x04 0x00000000>;
+
+ vc4: gpu {
+ compatible = "brcm,bcm2712-vc6";
+ };
+
+ pcie0: pcie@1000100000 {
+ compatible = "brcm,bcm2712-pcie";
+ reg = <0x10 0x00100000 0x00 0x9310>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ max-link-speed = <2>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ interrupt-parent = <&gicv2>;
+ interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "msi";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gicv2 GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gicv2 GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gicv2 GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&pcie_rescal>, <&bcm_reset 42>;
+ reset-names = "rescal", "bridge";
+ msi-controller;
+ msi-parent = <&pcie0>;
+
+ ranges =
+ /* ~4GiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+ <0x02000000 0x00 0x00000000 0x17 0x00000000 0x00 0xfffffffc>,
+ /* 12GiB, 64-bit, prefetchable at PCIe 04_0000_0000 */
+ <0x43000000 0x04 0x00000000 0x14 0x00000000 0x03 0x00000000>;
+
+ dma-ranges =
+ /* 64GiB, 64-bit, prefetchable at PCIe 10_0000_0000 */
+ <0x43000000 0x10 0x00000000 0x00 0x00000000 0x10 0x00000000>;
+
+ status = "disabled";
+ };
+
+ pcie1: pcie@1000110000 {
+ compatible = "brcm,bcm2712-pcie";
+ reg = <0x10 0x00110000 0x00 0x9310>;
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ max-link-speed = <2>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ interrupt-parent = <&gicv2>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "msi";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gicv2 GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gicv2 GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gicv2 GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&pcie_rescal>, <&bcm_reset 43>;
+ reset-names = "rescal", "bridge";
+ msi-controller;
+ msi-parent = <&mip1>;
+
+ ranges =
+ /* ~4GiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+ <0x02000000 0x00 0x00000000 0x1b 0x00000000 0x00 0xfffffffc>,
+ /* 12GiB, 64-bit, prefetchable at PCIe 04_0000_0000 */
+ <0x43000000 0x04 0x00000000 0x18 0x00000000 0x03 0x00000000>;
+
+ dma-ranges =
+ /* 64GiB, 64-bit, non-prefetchable at PCIe 10_0000_0000 */
+ <0x03000000 0x10 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+ /* 4KiB, 64-bit, non-prefetchable at PCIe ff_ffff_f000 MIP1 */
+ <0x03000000 0xff 0xfffff000 0x10 0x00131000 0x00 0x00001000>;
+
+ status = "disabled";
+ };
+
+ pcie2: pcie@1000120000 {
+ compatible = "brcm,bcm2712-pcie";
+ reg = <0x10 0x00120000 0x00 0x9310>;
+ device_type = "pci";
+ linux,pci-domain = <2>;
+ max-link-speed = <2>;
+ num-lanes = <4>;
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ interrupt-parent = <&gicv2>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "msi";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gicv2 GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gicv2 GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gicv2 GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&pcie_rescal>, <&bcm_reset 44>;
+ reset-names = "rescal", "bridge";
+ msi-controller;
+ msi-parent = <&mip0>;
+
+ ranges =
+ /* ~4GiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+ <0x02000000 0x00 0x00000000 0x1f 0x00000000 0x00 0xfffffffc>,
+ /* 12GiB, 64-bit, prefetchable at PCIe 04_0000_0000 */
+ <0x43000000 0x04 0x00000000 0x1c 0x00000000 0x03 0x00000000>;
+
+ dma-ranges =
+ /* 4MiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+ <0x02000000 0x00 0x00000000 0x1f 0x00000000 0x00 0x00400000>,
+ /* 64GiB, 64-bit, prefetchable at PCIe 10_0000_0000 */
+ <0x43000000 0x10 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+ /* 4KiB, 64-bit, non-prefetchable at PCIe ff_ffff_f000 MIP0 */
+ <0x03000000 0xff 0xfffff000 0x10 0x00130000 0x00 0x00001000>;
+
+ status = "disabled";
+ };
+
+ mip0: msi-controller@1000130000 {
+ compatible = "brcm,bcm2712-mip";
+ reg = <0x10 0x00130000 0x00 0xc0>,
+ <0xff 0xfffff000 0x00 0x1000>;
+ msi-controller;
+ msi-ranges = <&gicv2 GIC_SPI 128 IRQ_TYPE_EDGE_RISING 64>;
+ brcm,msi-offset = <0>;
+ };
+
+ mip1: msi-controller@1000131000 {
+ compatible = "brcm,bcm2712-mip";
+ reg = <0x10 0x00131000 0x00 0xc0>,
+ <0xff 0xfffff000 0x00 0x1000>;
+ msi-controller;
+ msi-ranges = <&gicv2 GIC_SPI 247 IRQ_TYPE_EDGE_RISING 8>;
+ brcm,msi-offset = <8>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ clk_27MHz: clk-27M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ clock-output-names = "27MHz-clock";
+ };
+
+ clk_108MHz: clk-108M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <108000000>;
+ clock-output-names = "108MHz-clock";
+ };
+
+ hvs: hvs@107c580000 {
+ compatible = "brcm,bcm2712-hvs";
+ reg = <0x10 0x7c580000 0x0 0x1a000>;
+ interrupt-parent = <&disp_intr>;
+ interrupts = <2>, <9>, <16>;
+ interrupt-names = "ch0-eof", "ch1-eof", "ch2-eof";
+ };
+};
diff --git a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
new file mode 100644
index 0000000..3484670
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/raspberrypi,rp1-clocks.h>
+
+pci_ep_bus: pci-ep-bus@1 {
+ compatible = "simple-bus";
+ ranges = <0x00 0x40000000 0x01 0x00 0x00000000 0x00 0x00400000>;
+ dma-ranges = <0x10 0x00000000 0x43000000 0x10 0x00000000 0x10 0x00000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ rp1_clocks: clocks@40018000 {
+ compatible = "raspberrypi,rp1-clocks";
+ reg = <0x00 0x40018000 0x0 0x10038>;
+ #clock-cells = <1>;
+ clocks = <&clk_rp1_xosc>;
+ assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>,
+ <&rp1_clocks RP1_PLL_SYS>,
+ <&rp1_clocks RP1_PLL_SYS_SEC>,
+ <&rp1_clocks RP1_CLK_SYS>;
+ assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE
+ <200000000>, // RP1_PLL_SYS
+ <125000000>, // RP1_PLL_SYS_SEC
+ <200000000>; // RP1_CLK_SYS
+ };
+
+ rp1_eth: ethernet@40100000 {
+ compatible = "raspberrypi,rp1-gem", "cdns,macb";
+ reg = <0x00 0x40100000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>,
+ <&rp1_clocks RP1_CLK_SYS>,
+ <&rp1_clocks RP1_CLK_ETH_TSU>,
+ <&rp1_clocks RP1_CLK_ETH>;
+ clock-names = "pclk", "hclk", "tsu_clk", "tx_clk";
+ assigned-clocks = <&rp1_clocks RP1_CLK_ETH_TSU>,
+ <&rp1_clocks RP1_CLK_ETH>;
+ assigned-clock-rates = <50000000>,
+ <125000000>;
+ phy-mode = "rgmii-id";
+ cdns,aw2w-max-pipe = /bits/ 8 <8>;
+ cdns,ar2r-max-pipe = /bits/ 8 <8>;
+ cdns,use-aw2b-fill;
+ local-mac-address = [00 00 00 00 00 00];
+ phy-handle = <&phy1>;
+ phy-reset-gpios = <&rp1_gpio 32 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <5>;
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ rp1_gpio: pinctrl@400d0000 {
+ compatible = "raspberrypi,rp1-gpio";
+ reg = <0x00 0x400d0000 0x0 0xc000>,
+ <0x00 0x400e0000 0x0 0xc000>,
+ <0x00 0x400f0000 0x0 0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
diff --git a/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi b/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi
new file mode 100644
index 0000000..0ef30d7
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+rp1_nexus {
+ compatible = "pci1de4,1";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01 0x00 0x00000000
+ 0x02000000 0x00 0x00000000
+ 0x0 0x400000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ #include "rp1-common.dtsi"
+};
diff --git a/include/dt-bindings/clock/raspberrypi,rp1-clocks.h b/include/dt-bindings/clock/raspberrypi,rp1-clocks.h
new file mode 100644
index 0000000..248efb8
--- /dev/null
+++ b/include/dt-bindings/clock/raspberrypi,rp1-clocks.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2021 Raspberry Pi Ltd.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_RASPBERRYPI_RP1
+#define __DT_BINDINGS_CLOCK_RASPBERRYPI_RP1
+
+#define RP1_PLL_SYS_CORE 0
+#define RP1_PLL_AUDIO_CORE 1
+#define RP1_PLL_VIDEO_CORE 2
+
+#define RP1_PLL_SYS 3
+#define RP1_PLL_AUDIO 4
+#define RP1_PLL_VIDEO 5
+
+#define RP1_PLL_SYS_PRI_PH 6
+#define RP1_PLL_SYS_SEC_PH 7
+#define RP1_PLL_AUDIO_PRI_PH 8
+
+#define RP1_PLL_SYS_SEC 9
+#define RP1_PLL_AUDIO_SEC 10
+#define RP1_PLL_VIDEO_SEC 11
+
+#define RP1_CLK_SYS 12
+#define RP1_CLK_SLOW_SYS 13
+#define RP1_CLK_DMA 14
+#define RP1_CLK_UART 15
+#define RP1_CLK_ETH 16
+#define RP1_CLK_PWM0 17
+#define RP1_CLK_PWM1 18
+#define RP1_CLK_AUDIO_IN 19
+#define RP1_CLK_AUDIO_OUT 20
+#define RP1_CLK_I2S 21
+#define RP1_CLK_MIPI0_CFG 22
+#define RP1_CLK_MIPI1_CFG 23
+#define RP1_CLK_PCIE_AUX 24
+#define RP1_CLK_USBH0_MICROFRAME 25
+#define RP1_CLK_USBH1_MICROFRAME 26
+#define RP1_CLK_USBH0_SUSPEND 27
+#define RP1_CLK_USBH1_SUSPEND 28
+#define RP1_CLK_ETH_TSU 29
+#define RP1_CLK_ADC 30
+#define RP1_CLK_SDIO_TIMER 31
+#define RP1_CLK_SDIO_ALT_SRC 32
+#define RP1_CLK_GP0 33
+#define RP1_CLK_GP1 34
+#define RP1_CLK_GP2 35
+#define RP1_CLK_GP3 36
+#define RP1_CLK_GP4 37
+#define RP1_CLK_GP5 38
+#define RP1_CLK_VEC 39
+#define RP1_CLK_DPI 40
+#define RP1_CLK_MIPI0_DPI 41
+#define RP1_CLK_MIPI1_DPI 42
+
+/* Extra PLL output channels - RP1B0 only */
+#define RP1_PLL_VIDEO_PRI_PH 43
+#define RP1_PLL_AUDIO_TERN 44
+
+#endif
diff --git a/include/dt-bindings/clock/rp1.h b/include/dt-bindings/clock/rp1.h
index 1305bf7..ad5ad07 100644
--- a/include/dt-bindings/clock/rp1.h
+++ b/include/dt-bindings/clock/rp1.h
@@ -3,50 +3,4 @@
* Copyright (C) 2021 Raspberry Pi Ltd.
*/
-#define RP1_PLL_SYS_CORE 0
-#define RP1_PLL_AUDIO_CORE 1
-#define RP1_PLL_VIDEO_CORE 2
-
-#define RP1_PLL_SYS 3
-#define RP1_PLL_AUDIO 4
-#define RP1_PLL_VIDEO 5
-
-#define RP1_PLL_SYS_PRI_PH 6
-#define RP1_PLL_SYS_SEC_PH 7
-#define RP1_PLL_AUDIO_PRI_PH 8
-
-#define RP1_PLL_SYS_SEC 9
-#define RP1_PLL_AUDIO_SEC 10
-#define RP1_PLL_VIDEO_SEC 11
-
-#define RP1_CLK_SYS 12
-#define RP1_CLK_SLOW_SYS 13
-#define RP1_CLK_DMA 14
-#define RP1_CLK_UART 15
-#define RP1_CLK_ETH 16
-#define RP1_CLK_PWM0 17
-#define RP1_CLK_PWM1 18
-#define RP1_CLK_AUDIO_IN 19
-#define RP1_CLK_AUDIO_OUT 20
-#define RP1_CLK_I2S 21
-#define RP1_CLK_MIPI0_CFG 22
-#define RP1_CLK_MIPI1_CFG 23
-#define RP1_CLK_PCIE_AUX 24
-#define RP1_CLK_USBH0_MICROFRAME 25
-#define RP1_CLK_USBH1_MICROFRAME 26
-#define RP1_CLK_USBH0_SUSPEND 27
-#define RP1_CLK_USBH1_SUSPEND 28
-#define RP1_CLK_ETH_TSU 29
-#define RP1_CLK_ADC 30
-#define RP1_CLK_SDIO_TIMER 31
-#define RP1_CLK_SDIO_ALT_SRC 32
-#define RP1_CLK_GP0 33
-#define RP1_CLK_GP1 34
-#define RP1_CLK_GP2 35
-#define RP1_CLK_GP3 36
-#define RP1_CLK_GP4 37
-#define RP1_CLK_GP5 38
-#define RP1_CLK_VEC 39
-#define RP1_CLK_DPI 40
-#define RP1_CLK_MIPI0_DPI 41
-#define RP1_CLK_MIPI1_DPI 42
+#include <dt-bindings/clock/raspberrypi,rp1-clocks.h>
--
2.35.3
