File libvterm.changes of Package libvterm
-------------------------------------------------------------------
Fri Jan 20 16:27:01 UTC 2023 - Dirk Müller <dmueller@suse.com>
- update to 0.3.1:
* vterm-dump specifically emit NUL/CAN/SUB/DEL
* Optionally emit NUL/CAN/SUB/DEL from parser than
* Don't bother to emit the unrecognized sequence in DECRQSS
* erase_internal should only set fg/bg color, resetting others
* Added vterm_screen_set_default_colors()
* Delete mk_wcswidth functions as they're unused
* Also accept DECSGR sequences for superscript/subscript
-------------------------------------------------------------------
Mon Oct 3 16:40:10 UTC 2022 - Matej Cepl <mcepl@suse.com>
- Update to 0.3.0 (unfortunately, upstream doesn't provide
correct changelog so this is just log of VCS):
- Pass lineinfos into screen resize callback; make it
responsible for reshaping them
- getchar() into unsigned char in vterm-ctrl.c to avoid
complaints of comparison signedness (LP1894806)
- Avoid remaining VLA by bounding the combining-char search to
the max supported chars per cell
- Avoid putting a potentially-unbounded VLA on the stack as
temporary working space for character decode, by using the
tmpbuffer in on_text instead
- Set a much larger default out/tmpbuffer size (4096bytes),
because now a size-constrained caller could make them smaller
- Permit overriding size of outbuffer / tmpbuffer as builder
params
- Create struct VTermBuilder and vterm_build()
- VTermAllocator field can be const in struct VTerm
- Store INCDIR directly in .pc file rather than indirecting it
via PREFIX
- Version bump to v0.2
- Selection send and recv should use independent partial-state
storage
- Also support sending the selection
- Replace vterm_push_output_sprintf_dcs with a more generic
_str version that can independently control introduction C1
vs terminating ST
- Add a selection callback for query
- Don't emit any mouse sequences when mouse reporting disabled
- Remember to reset mouse flags as part of overall
vterm_state_reset()
- Add a usage comment at the top of bin/unterm.c
- Capture unit test for OSC 52
- Further bugfixes for OSC 52 handling in various split-write
conditions
- Bugfix for cornercase where two-byte ST is split across
buffer writes
- Initial attack at OSC 52 = selection management, to set the
clipboard
- An initial attack at documenting (most of?) the sequences
from xterm
- Notation fixes in doc/seqs.txt
- Provide state fallbacks for APC/PM/SOS
- Other C0/C1 controls are permitted within SOS strings
- Recognise APC, PM and SOS in the parser
- Use 0x99 as a C1 test byte instead of 0x9F because the latter
is APC which is a string introducer
- Set _XOPEN_SOURCE 600 unconditionally in vterm-ctrl.c
- Make libvterm compile on arm64 Macs (from
https://github.com/neovim/libvterm/pull/6)
- Ensure that resize shorter does not send the cursor to a
negative row
- Remove debugging print on DECRQSS
- Regenerate fullwidth.inc for latest Unicode
- A much more efficient find-wide-chars.pl
- Accept OSC ... ST without an intermediate semicolon after the
command number
- Fix printf argument types
(https://github.com/vim/vim/pull/5456)
- Partial bugfix for uncleared area after resize (thanks Jörg
Richter)
- Recognise SGR 8 for conceal (thanks Jörg Richter)
- Define a new dedicated 'state fallbacks' struct rather than
abusing the parser callbacks one
- New string-handling API that streams in possibly-multiple
fragments
- Remember to length-check accesses at cell->chars[] because it
is not necessarily zero-terminated (LP 1846869)
- fix memory leak of vt->tmpbuffer (LP 1843449)
- t/run-test.pl option to abort on first fail
- Accept convenience formatting in ?screen_chars assertions;
makes unit tests more readable
- Include test script line number in t/run-test.pl output
- Add a short unit test that resize on altscreen at least
doesn't crash
- Only enable altscreen during unit tests that need it
- Better handling of resize to try to avoid the final
memmove(), and not drag scrollback in unnecessarily
- Can't lazy-allocate state->lineinfos[BUFIDX_ALTSCREEN]
because that allocs during byte run
- Initial hack at tracking 'continuation' marks per line in
lineinfo
- Allow run-test.pl to cope with empty assertion results
- Be sure to clear DWL/DHL status for blank lines caused by
scroll
- Pass 'state fields' as a struct into resize callback in case
of other things it needs to edit
- Remember to store a state->lineinfo array for both buffers
- Do all the initialising of VTermState in vterm_state_new()
- Rename realloc_buffer() to just alloc_buffer() since it
doesn't need to realloc now
- Rewrite of resize handling logic to hopefully cope much
better with reflow
-------------------------------------------------------------------
Mon Mar 30 20:04:17 CEST 2020 - Matej Cepl <mcepl@suse.com>
- All my previous builds were just figments of my imagination,
and neovim upstream claims one has to use 0.1.3 only. So,
downgrading.
-------------------------------------------------------------------
Mon Mar 30 19:19:23 CEST 2020 - Matej Cepl <mcepl@suse.com>
- Update to 0.1.3+bzr767:
- Remove debugging print on DECRQSS
- Regenerate fullwidth.inc for latest Unicode
- A much more efficient find-wide-chars.pl
- Accept OSC ... ST without an intermediate semicolon after the
command number
- Fix printf argument types (gh#vim/vim#5456)
-------------------------------------------------------------------
Sat Jan 11 21:25:32 CET 2020 - Matej Cepl <mcepl@suse.com>
- Update to 0.1.3+bzr762:
- Merge bugfixes up to v0.1.3
- Partial bugfix for uncleared area after resize (thanks Jörg
Richter)
- Recognise SGR 8 for conceal (thanks Jörg Richter)
- Define a new dedicated 'state fallbacks' struct rather than
abusing the parser callbacks one
- New string-handling API that streams in possibly-multiple
fragments
- Remember to length-check accesses at cell->chars[] because it
is not necessarily zero-terminated (LP 1846869)
- fix memory leak of vt->tmpbuffer (LP 1843449)
-------------------------------------------------------------------
Wed Sep 18 14:34:55 UTC 2019 - Martin Liška <mliska@suse.cz>
- Make build verbose and respect $optflags.
-------------------------------------------------------------------
Wed Sep 11 23:31:21 CEST 2019 - Matej Cepl <mcepl@suse.com>
- Update to 0~bzr755:
- 755 t/run-test.pl option to abort on first fail
- 754 Accept convenience formatting in ?screen_chars assertions; makes unit
tests more readable
- 753 Include test script line number in t/run-test.pl output
- 752 Add a short unit test that resize on altscreen at least doesn't crash
- 751 Only enable altscreen during unit tests that need it
- 750 Better handling of resize to try to avoid the final memmove(), and not
drag scrollback in unnecessarily
- 749 Can't lazy-allocate state->lineinfos[BUFIDX_ALTSCREEN] because that
allocs during byte run
- 748 Initial hack at tracking 'continuation' marks per line in lineinfo
- 747 Allow run-test.pl to cope with empty assertion results
- 746 Be sure to clear DWL/DHL status for blank lines caused by scroll
- 745 Pass 'state fields' as a struct into resize callback in case of other
things it needs to edit
- 744 Remember to store a state->lineinfo array for both buffers
- 743 Do all the initialising of VTermState in vterm_state_new()
- 742 Rename realloc_buffer() to just alloc_buffer() since it doesn't need to
realloc now
- 741 Rewrite of resize handling logic to hopefully cope much better with
reflow
- 739 Recognise an __END__ marker in a unit test file
- 738 Add a version check macro
- 737 Bump version to 0.1
- 736 Recognise SGR 4:3 for curly underline
- 735 Recognise subparameters in SGR 4:x to set off/single/double
- 734 Define some enum{} constants for pen.underline field values
- 733 Run unit tests on outfunc instead of buffering logic; truncation test
is no longer valid now
- 732 Optional vterm_output_set_callback() to set an output func; will
eventually replace buffer logic
- 731 Implement Query SGR by building a tmpbuffer then making a single
vterm_push_output call
- 730 More efficient one-line implementation of DCS and ST rendering parts of
_output_sprintf_dcs
- 729 Rewrite vterm_push_output_* functions to use a new tmpbuffer on main VT
object, push all output via _output_bytes()
- 728 The F1 to F4 keys should send SS3 rather than CSI when unmodified
- 727 Expose cell colour index as API value (LP1805035)
- 726 Document REP sequence
- 725 Rename/number some more state-related tests
- 724 Renumber the 4x test series up to 6x to make plenty more space for
state tests
- 723 Implement REP CSI (LP1805050)
- 722 Add --executable/-e flag to run-test.pl (LP1805034)
- 721 Ship src/*.inc files to destdir (thanks jamessan)
- 720 Add unit test for fullwidth emoji char
- 719 Initial attempt at better handling of double-width unicode characters
- 718 Fix implementation of query on bracketed paste mode (thanks jamessan)
- 717 Need to use 1U << 31 to keep C++ compilers happy (thanks jamessan)
- 716 Make sure to use CSI_* macros rather than hardcoding (1<<31) in
unterm.c (thanks jamessan)
- 715 Add DECSM 1004 to documentation
- 714 Move 'reportfocus' to keep numerical ordering in vterm-ctrl.c
- 713 Merge lp:~jamessan/libvterm/focus-events
- 712 Move strbuffer into the .parser sub-struct
- 711 Internal rearrangement of string state handling in parser, to better
fit upcoming new API
- 710 Now that parser 'text' callback should always make progress, no need to
use the strbuffer for it
- 709 Bugfix to account for UTF-8 decoder still consuming initial bytes of
a partial sequence
- 708 Improved handling of ESC parsing so it doesn't use the temporary
strbuffer
- 707 Found another document about escape sequences
- 706 An improved CSI parser that does not use the temporary strbuffer but
instead works entirely incrementally
- 705 Move parser-related state into its own sub-structure
- 704 Fix -Wpedant warnings from t/harness.c
- 703 Compile with -Wpedantic
- 702 Minor other syntax pedant fixes to bin/*.c files
- 701 Make all bitfields 'unsigned int'
- 700 Use an ifdef instead of commented code in parser.c's debugging
- 699 Ensure that all enums in header files lack a trailing comma, because
some older C++ compilers won't like that
- 698 Remeber to 'return 0' at the end of main() in the binaries
- 697 Avoid the \e escape in string literals in bin/*.c; replace with \x1b
- Removed _service file, bzr on Tumbleweed is too broken to be
used automatically, rather use upstream tarballs.
-------------------------------------------------------------------
Sun May 28 23:06:43 UTC 2017 - ronisbr@gmail.com
- Run spec-cleaner.
- Fix `libvterm.changes` indentation.
-------------------------------------------------------------------
Sat May 27 09:18:26 UTC 2017 - bwiedemann@suse.com
- Version bump to 0~bzr696.
Changelog:
* Add S8C1T control support to vterm-ctrl
* Implement querying of cursor shape in vterm-ctrl
* Remember to document ST in doc/seqs.txt
* Adjust linebreaking of 'break' statements to avoid gcc
warnings of misleading indentation
* Implement DECRQSS on SGR when set to RGB8 palette colours
* Reset the pen between independent tests of DECRQSS on SGR
* Bugfix for disabling mouse mode
* Ensure stdin's ICANON mode is restored even if vterm-ctrl
exits on error
* Initialise mouse state at VTermState creation rather than as
a side-effect of DECSM 100{0,2,3} - fixes LP1640917
* Pull VTermScreenCell.attrs out to its own named type
* Merge lp:~jamessan/libvterm/reproducibility (#307773,
boo#1041090)
-------------------------------------------------------------------
Thu Aug 25 15:53:26 UTC 2016 - ronisbr@gmail.com
- Version bump to 0~bzr684.
Changelog:
* Avoid "\e" because some C compilers don't like it
* Don't use wchar_t in unicode.c as it might not be big enough
* Remember to pass unicode codepoints in uint32_t rather than
int
-------------------------------------------------------------------
Sat Apr 9 22:18:12 UTC 2016 - ronisbr@gmail.com
- Version bump to 0~bzr681.
Changelog:
* Bugfix(?) for SunOS (thanks DominoTree -
https://github.com/neovim/libvterm/pull/1/files)
* (Alt-)Ctrl-Space should encode as (\e)\0
-------------------------------------------------------------------
Sat Dec 5 15:20:34 UTC 2015 - jengelh@inai.de
- Move description from main part to shlib part, since this will be
the one that always gets installed.
-------------------------------------------------------------------
Sat Dec 5 14:49:15 UTC 2015 - ronisbr@gmail.com
- Remove unnecessary dependency from libvterm-tool.
-------------------------------------------------------------------
Sat Dec 5 14:19:14 UTC 2015 - ronisbr@gmail.com
- Remove libtool files.
- Fix groups for libvterm, libvterm0, and libvterm-tools.
- Change package compression from .tar.gz to .tar.xz.
- Change %{soname} to %{sover}.
-------------------------------------------------------------------
Sat Dec 5 13:44:52 UTC 2015 - ronisbr@gmail.com
- Change package name to libvterm.
-------------------------------------------------------------------
Wed Dec 2 17:41:49 UTC 2015 - ronisbr@gmail.com
- Initial version based on home:gmc137:neovim/libvterm.
- Version bump to 0~bzr679.
- Change package version scheme to match openSUSE's guidelines.
- Clean spec file.
- Drop obsolete patch libvterm.optflags.patch.
