File mbuffer.changes of Package mbuffer
-------------------------------------------------------------------
Mon May 29 19:38:41 UTC 2023 - Dirk Müller <dmueller@suse.com>
- update to 20230301:
* Fix breaking connections on WAN links: retry on EAGAIN
-------------------------------------------------------------------
Sun May 29 19:34:00 UTC 2022 - Dirk Müller <dmueller@suse.com>
- update to 20220418:
* fix handling of filesystem full on stdout
-------------------------------------------------------------------
Mon Jan 31 20:28:59 UTC 2022 - Dirk Müller <dmueller@suse.com>
- update to 20211018:
* fixes related to TCP timeout handling
* enhancement: support setting config file via env var MBUFFERRC
* documentation update
* make TCPTimeout=0 disable the TCP timeout
* changed default TCP timeout from 10s to 100s
* TCP timeout now can be give with suffixes ms,s,min,h
* documented option for TCP timeout
* enhancement: accept IPv6 addresses in square bracket format
* enhancement: more detailed warning message for connect failures
* work around Solaris default old mercurial and incompatible sed
* removed cancel after join for reader thread
* updated install-sh
* mbuffer.1 has outdated version tag
* fix: hash algos should not suppress stdout
* enhancement: added option --no-direct to disable use of O_DIRECT
* defaults: raised default TCP timeout to 10ms for WAN connections
* fix: leave TCP buffer size untouched if not set
* enhancement: add option to set TCP timeout
* performance optimization: use recv with MSG_WAITALL instead of read
* configure fix: look for objdump also with target prefix
* testing: make sure to use gtar for testing to avoid unexpected failures
* portability: NetBSD compatibility fix
* build enhancement: added dependency calculation for make
* build enhancement: automatic version string generation
* configure fix for some powerpc toolchains
* update config.sub and config.guess
* added option to perform direct I/Os on temporary file
* autoadjust dependent parameters
* human readable buffer size information instead of kiB
* hashing infrastructure should also be enabled with libdl available
* report input file name in message for open failure
* fix: don't try to open network output as file after failure
* fix: potential issue related to inet6 hosts handling
* added complementary cmake based building and testing
* some cleanup work
* fix: erronous empty file generation on network connection failure
* enhanced default settings for better performance
* use O_DIRECT on input and output if possible
* option --direct is now deprecated and has no effect
* Output Size must be adjusted to Blocksize during initialization
* man-page corrections
* fixed some messages (typos and formatting)
* fix for network initialization for systems without getaddrinfo
* support suppressing messages with Verbose=silent and Verbose=none
* fix detection of invalid arguments to option -v
* Copyright update to 2019
* consistently use CLOCK_MONOTONIC if available
* handle time standing still or running backward
* updated INSTALL file to reflect available options
* added explanation for lack of MacOS support
* linking of available hash libraries during runtime
-------------------------------------------------------------------
Tue Jun 12 13:04:46 UTC 2018 - mvetter@suse.com
- Update to version 20180505 (important changes since 20151002):
* fix potential hang with small input size
* configure enhancement: objdump may be named gobjdump
* fix tape end of file marker may be ignored
* removed obsolete alpha code
* fix: fix listen's backlog argument, which can cause issues on Linux 4.4
* fix: fix potential assertion triggered by interrupted system call
* fix: use thread-safe mt_usleep instead of sleep(3) for watchdog timing
* enhancement: ignore EINTR for I/O syscalls
* enhancement: report percent done, when input size is known (is a file)
* enhancement: watchdog raises SIGKILL if SIGINT had no effect
* added an example config file, with documentation of all options
* added parameter StatusInterval
* fix false warning on comments in config files
* performance optimized defaults
* fix: potential hang, when one output fails to open
- Remove mbuffer-fix_pointer_cast.patch: dont see a reason for this
-------------------------------------------------------------------
Tue Dec 1 16:26:25 UTC 2015 - p.drouand@gmail.com
- Update to version 2015100 :
* fix: SegV when argument to -v is missing
* fix: potential infinite loop on output error
- Changes from version 20150412 :
* fix: watchdog cannot do its job if it is cleaned up to early
* fix: clear sa_flags and sa_mask before use, although ignored
- Changes from version 20141227 :
* added option --pid to print PID of current process
* updated usage to include option -W
* man page formatting fixes
* configure updates
* support compiling on systems that do not define PATH_MAX
-------------------------------------------------------------------
Sat Jan 24 21:55:43 UTC 2015 - andreas.stieger@gmx.de
- version 20141227:
+ added option --pid to print PID of current process
+ updated usage to include option -W
+ man page formatting fixes
+ configure updates
+ support compiling on systems that do not define PATH_MAX
-------------------------------------------------------------------
Wed Apr 16 22:51:24 UTC 2014 - crrodriguez@opensuse.org
- version 20140310
* added memory advise for buffer memory
* prevent buffer overflow attack via defaults file
* ignore defaults file from other users
* updated documentation for use with cron
* minor bugfixes
* new feature: set option defaults in ~/.mbuffer.rc
* enhancement: write status to the log file
* enhancement: added option to suppress status logging
* fix: formatting fix for summary message
- spec file changes:
* refresh patch with p1
* the mhash library is abandonware, this is no good
since we are talking about crypto software, use openSSL instead.
-------------------------------------------------------------------
Mon Apr 8 21:22:36 UTC 2013 - pascal.bleser@opensuse.org
- update to 20132020:
* reverted incorrect fix for -P 100, which may lead to data corruption
* reenable hash libraries (no correlation with data corruption)
* bail out if any output fails to initialize
* refixed hang on -P 100
* reduced sending overhead
* fixed handling of option -f
- changes from 20130209:
* hash names should be compared case insensitive for convenience
* safeguard against missing argument to option --hash
* support for hash calculation withdrawn, due to potential data corruption,
when the buffer runs full
-------------------------------------------------------------------
Sat Nov 17 14:09:22 UTC 2012 - pascal.bleser@opensuse.org
- update to 20121111:
* support float values as argument to memory options
* added a watchdog that terminates mbuffer if input
or output activity stalls (option -W)
-------------------------------------------------------------------
Sat May 05 13:40:48 UTC 2012 - pascal.bleser@opensuse.org
- update to 20120505:
* fix: suppress summary on stderr if -q is used with -l
* fix: option -P 100 may lead to hang
-------------------------------------------------------------------
Sun Jul 24 20:21:45 UTC 2011 - pascal.bleser@opensuse.org
- update to 20110724:
* fix: garbage might be written after input error
* enhancement: prompt for additional volumes for argument "-n 0"
* enhancement: prompt for next volume on I/O error if -n is set (some tape
devices incorrectly return -1/EIO instead of 0)
* enhancement: added option to append to output file
* update: remove use of deprecated interface sigignore
-------------------------------------------------------------------
Fri Mar 18 09:47:09 UTC 2011 - pascal.bleser@opensuse.org
- update to 20110317:
* an option was added to terminate on any kind of error
* a hang when starting mbuffer in the background was fixed
* the displayed dimensions were changed to be compliant to SI standards
-------------------------------------------------------------------
Thu Jan 20 02:20:27 UTC 2011 - pascal.bleser@opensuse.org
- update to 20110119:
* fixes an incorrect sanity check for the interaction between hashing and
multiple outputs
-------------------------------------------------------------------
Thu Dec 30 22:21:48 UTC 2010 - pascal.bleser@opensuse.org
- update to 20101230:
* hash values now are also written to log files
* this release will report the last block number on volume, report time per
volume
-------------------------------------------------------------------
Fri May 28 21:53:34 UTC 2010 - pascal.bleser@opensuse.org
- update to 20100526:
* fixes an interaction between watermark and rate limitation algorithms that
messed up rate limitation
* fixes a potential deadlock on SIGINT
-------------------------------------------------------------------
Sat Mar 27 21:01:15 UTC 2010 - pascal.bleser@opensuse.org
- update to 20100327:
* a problem in which hash calculation was being omitted if no output file is
specified was fixed
* a summary is included in the log file in quiet mode
* some typographical errors in the man page were fixed
-------------------------------------------------------------------
Mon Dec 28 19:52:33 UTC 2009 - pascal.bleser@opensuse.org
- update to 20091227:
* rate limitation now uses a monotonic time source if available
* lockup on input error has been fixed
* segfault in quiet mode has been fixed
* cancellation fixes
-------------------------------------------------------------------
Sun Nov 22 22:34:53 UTC 2009 - pascal.bleser@opensuse.org
- update to 20091122:
* multiple fixes for assertion failures raised during error situations
-------------------------------------------------------------------
Wed Nov 11 00:00:00 CET 2009 - pascal.bleser@opensuse.org
- update to 20091110:
* code is compiled for 64-bit word size by default, if that capability is
available
* a hang which occurred on SIGINT when input is idle was fixed
* fixes were made for the IPv6 code
-------------------------------------------------------------------
Tue Oct 13 00:00:00 CEST 2009 - pascal.bleser@opensuse.org
- update to 20091012:
* adds a separate thread for hash calculation
* adds support for libmhash with all provided hash algorithms
* fixes a typo in the examples section
* fixes a potential race condition
* fixes a potential lockup on SIGINT
-------------------------------------------------------------------
Mon Jun 29 00:00:00 CEST 2009 - pascal.bleser@opensuse.org
- update to 20090628:
* adds support for IPv6 and service name lookup
* reintegrates a lost fix for libmhash initialization
-------------------------------------------------------------------
Sun Feb 15 00:00:00 CET 2009 - guru@unixtech.be
- update to 20090215:
* fixes a hang on transfer sizes smaller than blocksize with status display
active
* man page update, summary display update
* libmhash initialization fix
* termination latency with active status display is reduced
* fix for -q suppressing the output of -H
-------------------------------------------------------------------
Thu Jan 15 00:00:00 CET 2009 - guru@unixtech.be
- update to 20090113:
* a fix for an assertion failure in network mode when compiled for 64-bit
architectures
-------------------------------------------------------------------
Wed Jan 7 00:00:00 CET 2009 - guru@unixtech.be
- scrapped old %%changelog entries
- update to 20090106
-------------------------------------------------------------------
Mon Dec 8 00:00:00 CET 2008 - guru@unixtech.be
- update to 20081207:
* more intelligent TCP buffer tuning plus an undocumented option to manually
set the TCP buffer size
* fixes several typos, and fixes for some message formatting issues
-------------------------------------------------------------------
Sun Oct 26 00:00:00 CEST 2008 - guru@unixtech.be
- update to 20081023:
* mbuffer should not abort on SIGTERM
* a segv which occurred when an invalid option was given was fixed
* a minor codepath optimization was made
* the status display now waits for the first block to be read
-------------------------------------------------------------------
Wed Oct 15 00:00:00 CEST 2008 - guru@unixtech.be
- update to 20081015:
* autoloader commands are now prevented from corrupting mbuffer's output
* cancellation issues were fixed
* sendfile should fall back to write
* manpath needs to be created
* support was added for O_DIRECT on systems that provide it
* documentation updates
