File custom_remove.template of Package clone-master-clean-up.25847

# It is a difference, if the master system is a plain vanilla installation or
# if additional software is installed, configured and heavily tested and should
# be rolled out later in the whole system landscape.
# So the parts, which need to be cleaned up, are different depending on these
# use cases.
# See some examples for additional needed clean ups below.
# 
# Please copy the template file '/usr/share/clone-master-clean-up/custom_remove.template'
# to '/etc/clone-master-clean-up/custom_remove' and un-comment the parts
# you need or add additional parts, which will fit your needs.
# Please be careful, the template file will be changed during future package
# updates. So do NOT change the content. It will get lost. Always make changes
# to a copy of the file.
#
# Be in mind:
# At the moment only the removal of files or directories are supported.
# Removing special parts from file content or other special scripting is NOT
# supported

#
# Examples:
#
# If you install a special system management software (like Fujitsus ServerView,
# HPs Insight Management Agents or IMBs  Director Agent), you need to clean up
# some log, configuration or database files.
# In most cases these files reside in:
# /etc/<mgmtSW>
# /opt/<Vendor>/<mgmtSW>
# /var/log/<Vendor>
#
# e.g. remove old ServerView Agent Database and other related data
# /etc/srvmagt/{VersionView.sav,VersionView.act,CommonConfig.ccs}
# /etc/srvmagt/VME/var/db/*
# /opt/fujitsu/ServerViewSuite/RAIDManager/bin/*\.xml
# /var/log/srvmagt/log\.
#
#
# Another use case may be the integration of a backup solution into the image
# In this case some files depending to this solution need to be cleaned up.
#
#
# Hardware dependend scenarios
#
# Lika a vendor specific management software for special hardware.
# e.g. OneCommand management software for Avago/Emulex controller hardware.
# Depending on the used version of the software the pathnames may change
# /var/opt/<vendor>/<mgmtSW>/logs/*
# or
# /usr/sbin/<mgmtSW>/*log
#
# e.g
# /usr/sbin/ocmanager/*log
# /var/opt/emulex/ocmanager/logs/*
# /var/opt/emulex/ocmanager/Dump
# /usr/sbin/hbanyware/*log
# /usr/sbin/hbanyware/Dump
# if working with saved adapter parameters
# check /usr/sbin/ocmanager/RMRepository for superfluous entries
#
# or the tools for megaRaid (MegaCli).
# /opt/MegaRAID/MegaCli/*log
#
#
# If the used HBA model has changed, check /etc/hba.conf for superfluous entries.
#
#
# Clean up additional network config files
# e.g. bonding interfaces or vlan interfaces
# /etc/sysconfig/network/ifcfg-{bond,vlan}*
# /etc/sysconfig/network/routes
#
# Room for improvement
#
#