File yast2-scanner.changes of Package yast2-scanner
-------------------------------------------------------------------
Fri Sep 9 08:07:06 UTC 2022 - Michal Filka <mfilka@suse.com>
- bsc#1203227
- Replaced egrep with grep -E.
- 4.5.1
-------------------------------------------------------------------
Wed Apr 06 13:24:58 UTC 2022 - Ladislav Slezák <lslezak@suse.cz>
- Bump version to 4.5.0 (bsc#1198109)
-------------------------------------------------------------------
Tue Apr 20 18:14:05 UTC 2021 - Dirk Müller <dmueller@suse.com>
- stop packaging docdir, it only contained the license which
is now in licensedir (bsc#1184897)
- spec file cleanups
- 4.4.1
-------------------------------------------------------------------
Tue Apr 20 13:51:55 UTC 2021 - Ladislav Slezák <lslezak@suse.cz>
- 4.4.0
-------------------------------------------------------------------
Fri May 31 12:38:15 UTC 2019 - Stasiek Michalski <hellcp@mailbox.org>
- Add metainfo (fate#319035)
- Revamp spec
- Replace GenericName with Comment
- 4.2.0
-------------------------------------------------------------------
Tue Feb 26 12:18:53 UTC 2019 - José Iván López González <jlopez@suse.com>
- Version bump (bsc#1124009)
- 4.1.0
-------------------------------------------------------------------
Mon Nov 26 02:43:29 UTC 2018 - Noah Davis <noahadvs@gmail.com>
- Provide icon with module (boo#1109310)
- 4.0.3
-------------------------------------------------------------------
Tue Oct 16 16:08:12 CEST 2018 - schubi@suse.de
- Added license file to spec.
-------------------------------------------------------------------
Mon Aug 20 13:25:22 CEST 2018 - schubi@suse.de
- Switched license in spec file from SPDX2 to SPDX3 format.
-------------------------------------------------------------------
Thu Jun 28 09:23:41 CEST 2018 - schubi@suse.de
- Added additional searchkeys to desktop file (fate#321043).
- 4.0.2
-------------------------------------------------------------------
Thu Apr 12 06:21:10 UTC 2018 - knut.anderssen@suse.com
- bnc#859353
- Adapted setup_network_scanner_config using the systemd sane
socket unit when exists.
- 4.0.1
-------------------------------------------------------------------
Fri Apr 6 18:53:38 UTC 2018 - mfilka@suse.com
- bnc#1087957 - version bump
- 4.0.0
-------------------------------------------------------------------
Tue Apr 4 08:22:53 UTC 2017 - mfilka@suse.com
- bnc#1026027
- dropped call to insserv when enabling xinetd
- 3.2.1
-------------------------------------------------------------------
Mon Apr 3 08:33:51 UTC 2017 - mfilka@suse.com
- bnc#1026027
- dropped calls to insserv related to HP's obsoleted services.
- 3.2.0
-------------------------------------------------------------------
Tue Jun 7 11:15:38 UTC 2016 - igonzalezsosa@suse.com
- Stop generating autodocs (fate#320356)
- 3.1.3
-------------------------------------------------------------------
Thu Dec 5 17:27:36 CEST 2014 - jsmeix@suse.de
- setup_network_scanner_config.with_systemd_support is an
enhancement for /usr/lib/YaST2/bin/setup_network_scanner_config
that provides additional support for systemd (bnc#859353).
-------------------------------------------------------------------
Thu Dec 5 16:45:07 CEST 2014 - jsmeix@suse.de
- use_fast_append_instead_of_slow_add.diff replaces
slow Builtins.add() with fast '<<' append operator
where needed to avoid "hang up impression" (bnc#877516).
-------------------------------------------------------------------
Thu Dec 4 09:51:31 UTC 2014 - jreidinger@suse.com
- remove X-KDE-Library from desktop file (bnc#899104)
-------------------------------------------------------------------
Wed Nov 13 15:56:18 UTC 2013 - jreidinger@suse.com
- Add explicit COPYING file
-------------------------------------------------------------------
Thu Sep 19 15:52:08 UTC 2013 - lslezak@suse.cz
- do not use *.spec.in template, use *.spec file with RPM macros
instead
- 3.1.0
-------------------------------------------------------------------
Wed Jul 31 08:39:09 UTC 2013 - yast-devel@opensuse.org
- converted from YCP to Ruby by YCP Killer
(https://github.com/yast/ycp-killer)
- version 3.0.0
-------------------------------------------------------------------
Tue May 8 15:14:57 CEST 2012 - jsmeix@suse.de
- V 2.23.0
- Third party driver "epkowa" responsibility transferred
from Avasys to Epson (bnc#746038).
- Use ButtonBox widget in src/Scanner.ycp (bnc#701263).
- Fixed typo in help text "UDB" -> "USB" (bnc#703235).
- Replaced the HTTP URLs to the Style Guide with the plain text
"YaST Style Guide (dated Tue, 04 Nov 2008)" (bnc#732272).
-------------------------------------------------------------------
Thu Mar 29 15:58:34 CEST 2012 - jsuchome@suse.cz
- merge proofread texts
-------------------------------------------------------------------
Fri Dec 16 08:49:24 UTC 2011 - coolo@suse.com
- it's actually GPL 2.0 only
-------------------------------------------------------------------
Fri Nov 25 12:24:56 UTC 2011 - coolo@suse.com
- add libtool as buildrequire to avoid implicit dependency
-------------------------------------------------------------------
Fri Aug 5 12:35:01 CEST 2011 - tgoettlicher@suse.de
- fixed .desktop file (bnc #681249)
-------------------------------------------------------------------
Thu Feb 10 14:38:49 CET 2011 - jsmeix@suse.de
- V 2.20.1
- Changed the number for DownloadProgress to multiple of 1024
to get nicer looking "nnn.0 KB" texts in the Gtk UI.
Using 921600 because /var/lib/YaST2/scanner_database.ycp
is about 890000 bytes in openSUSE 11.4
(see openSUSE/Novell Bugzilla bnc#670675).
-------------------------------------------------------------------
Thu Sep 23 15:27:40 CEST 2010 - jsmeix@suse.de
- V 2.20.0
- Let the ConfigureBackendDialog automatically proceed to the next
dialog (i.e. to the overview dialog) after successful backend
activation (see openSUSE/Novell Bugzilla bnc#636083).
- Fix determine_active_scanner_backends so that it also detects
active backends with '_' or '-' characters in the backend name
(see openSUSE/Novell Bugzilla bnc#641111).
-------------------------------------------------------------------
Tue Apr 6 17:43:24 CEST 2010 - jsmeix@suse.de
- V 2.19.2
- HAL is deprecated and does no longer support to grant read/write
device access permissions for scanners to the currently logged
in "desktop" user. Therefore the HAL related code was removed
(see Novell/Suse Bugzilla bnc#593946).
- Implemented Novell/Suse Bugzilla bnc#578203 enhancement
to show in the model selection list "unmaintained driver"
and added info to the help text so that the user knows
in advance whether or not he could expect some help
if there are issues with an unmaintained driver.
- In case of the "net" meta-backend, the [Edit] button in the
OverviewDialog now also launches the "Scanning via Network"
dialog even when the "net" meta-backend did not recognize
a scanner (see Novell/Suse Bugzilla bnc#578104).
-------------------------------------------------------------------
Thu Jan 21 17:36:27 CET 2010 - jsmeix@suse.de
- V 2.19.1
- Adapted to no longer try to install the proprietary packages
iscan, iscan-proprietary-drivers, and iscan-firmware.
Instead show a meaningful user information
when one of those Epson models is to be set up
which require the proprietary Iscan software
so that the user can download and install
the right packages from Avasys on his own
(see Novell/Suse Bugzilla bnc#569917).
- Reduced too long help text 'regarding firewall' but
added a link to 'SDB:CUPS and SANE Firewall settings' at
http://en.opensuse.org/SDB:CUPS_and_SANE_Firewall_settings
(see Novell/Suse Bugzilla bnc#551282).
------------------------------------------------------------------
Wed Jan 13 18:56:03 CET 2010 - kmachalkova@suse.cz
- Adjusted .desktop file(s) to wrap /sbin/yast2/ calls in xdg-su
where root privileges are needed, removed X-KDE-SubstituteUID key
(see Novell/Suse Bugzilla bnc#540627 and bnc#550073).
-------------------------------------------------------------------
Wed Dec 23 15:21:13 CET 2009 - jsmeix@suse.de
- V 2.19.0
- Replaced overcomplicated but nevertheless mostly useless code
for using the YaST SuSEFirewall module by simple generic code
in a ShowFirewallPopup function in the same way as it works
for yast2-printer (compare Novell/Suse Bugzilla bnc#549065)
and enhanced the help text "Regarding Firewall",
(see Novell/Suse Bugzilla bnc#551282).
- Fixed duplicate button widget with ID `back by
calling Wizard::HideBackButton() before calling
Wizard::SetAbortButton(`back,Label::CancelButton()), see
http://lists.opensuse.org/opensuse-factory/2009-10/msg00528.html
- Added X-KDE-SubstituteUID=true to src/scanner.desktop
(see Novell/Suse Bugzilla bnc#550073).
-------------------------------------------------------------------
Wed Feb 11 16:04:35 CET 2009 - jsmeix@suse.de
- V 2.18.0
- Fixed a typo in a text in Scanner.ycp
(see Novell/Suse Bugzilla bnc#374628 in particular comment #18).
-------------------------------------------------------------------
Thu Dec 4 12:16:23 CET 2008 - jsmeix@suse.de
- V 2.17.5
- Since openSUSE 11.1 'usb_device' must be replaced by 'usb' in
HAL fdi files (see Novell/Suse Bugzilla bnc#438867).
Adapted test_and_set_scanner_access_permissions so that it
works for openSUSE 11.1 and is still to some extent
backward compatible with openSUSE 11.0.
-------------------------------------------------------------------
Wed Dec 3 11:37:38 CET 2008 - jsmeix@suse.de
- V 2.17.4
- Using /usr/share/hal/fdi/information/20thirdparty/70-scanner.fdi
instead of /etc/hal/fdi/policy/10osvendor/70-scanner.fdi
and /etc/hal/fdi/information/20thirdparty/80-scanner.fdi
instead of /etc/hal/fdi/policy/10osvendor/80-scanner.fdi
(see Novell/Suse Bugzilla bnc#438867).
-------------------------------------------------------------------
Fri Nov 21 11:46:49 CET 2008 - jsmeix@suse.de
- V 2.17.3
- Removed the "Cancel" button from the Overview dialog
because there is nothing to "Cancel" here.
Do no longer restore the outdated default button names
when a dialog is closed to avoid too many visible
changes of button names.
(See Novell/Suse Bugzilla bnc#440560).
-------------------------------------------------------------------
Tue Nov 4 09:17:52 CET 2008 - jsmeix@suse.de
- V 2.17.2
- Removed the "Back" button from the Overview dialog
and renamed other buttons according to new style guide
by manually overwriting the Wizard module defaults
(see Novell/Suse Bugzilla bnc#440560 comment #5).
- Replaced Report with Popup and used Popup::ErrorDetails
to show stderr when commands failed (without any change
for translated texts).
-------------------------------------------------------------------
Wed Sep 10 16:20:00 CEST 2008 - jsmeix@suse.de
- V 2.17.1
Run test_and_set_scanner_access_permissions also
for the normal test via the TestBackend function
(see Novell/Suse Bugzilla bnc#340173).
-------------------------------------------------------------------
Wed Sep 10 14:49:11 CEST 2008 - jsmeix@suse.de
- V 2.17.0
- Applied proofread texts.
- Enforce a safe environment for ExecuteBashCommand.
- Added an translatable error message to DetermineActiveScanners
if there is no response from the 'scanimage' command
(see V 2.16.9 and Novell/Suse Bugzilla bnc#387555).
- Added an translatable message to SetScannerAccessPermissions
if HAL does not know about the scanner
(see V 2.16.7 and Novell/Suse Bugzilla bnc#340173).
-------------------------------------------------------------------
Fri May 16 16:40:22 CEST 2008 - jsrain@suse.cz
- added categories Settings and System into desktop file
(bnc #382778)
-------------------------------------------------------------------
Thu May 8 16:58:51 CEST 2008 - jsmeix@suse.de
- V 2.16.10
- Implemented a progress bar while creating the scanner database
without any new or changed text because of the 'text freeze'
(see Novell/Suse Bugzilla bnc#388144).
-------------------------------------------------------------------
Wed May 7 15:40:27 CEST 2008 - jsmeix@suse.de
- V 2.16.9
- Added an explanatory error message to determine_active_scanners
if there is no response from the 'scanimage' command.
Because of the YaST 'text freeze' this error message cannot be
translated for openSUSE 11.0 so that currently it is only a
simple stderr message, (see Novell/Suse Bugzilla bnc#387555).
-------------------------------------------------------------------
Tue Apr 29 11:52:18 CEST 2008 - jsmeix@suse.de
- V 2.16.8
- Skipped "SCSI via USB" scanners in autodetect_scanners
(see Novell/Suse Bugzilla bnc#382744).
-------------------------------------------------------------------
Tue Apr 22 15:27:55 CEST 2008 - jsmeix@suse.de
- V 2.16.7
- Added tests to test_and_set_scanner_access_permissions
if HAL knows about the scanner and show an explanatory
error message if not. The error message is only shown
when a driver is activated but not if a driver is
deactivated. Because of the YaST 'text freeze' this
error message cannot be translated for openSUSE 11.0
so that currently it is only a simple stderr message,
(see Novell/Suse Bugzilla bnc#340173).
-------------------------------------------------------------------
Thu Apr 17 13:17:35 CEST 2008 - jsmeix@suse.de
- V 2.16.6
- In the test_and_set_scanner_access_permissions script
use info.subsystem instead of the deprecated info.bus
for the HAL 80-scanner.fdi file.
-------------------------------------------------------------------
Tue Apr 15 15:43:55 CEST 2008 - jsmeix@suse.de
- V 2.16.5
- Add an exception to Scanner.ycp so that the fallback entry
for the hpaio driver with the special USB ID "0x03f0:0x0000"
is preselected for all HPLIP USB all-in-one devices
which are autodetected by "hp-probe -busb -escan"
in /usr/lib/YaST2/bin/autodetect_scanners.
- Since HPLIP version 2.8.4 there is no longer any startup daemon.
I.e. the hpaio driver is now just a normal driver.
The hplip init script still exists and was adapted to provide
backward compatibility but all it does is to stop a possibly
running hplip daemon.
Accordingly the setup_hplip_scanner_service script was adapted
to only disable both ptal and hplip completely.
As a consequence some special popups regarding the hplip service
were removed and the help text was simplified.
-------------------------------------------------------------------
Wed Apr 9 14:21:43 CEST 2008 - jsmeix@suse.de
- V 2.16.4
- Modified yast2-scanner.spec.in to exclude displaytest from the
files which are sent to /usr/lib/rpm/find-requires so that the
yast2-scanner RPM does no longer require X libraries (libX11,
libXau, libxcb, and libxcb-xlib) so that it can be installed
in a system without X.
Nevertheless it is still architecture dependant because of its
displaytest binary.
It does not matter if displaytest fails orderly because its
XOpenDisplay call fails or if it crashes because of missing
libraries. All what matters is that displaytest finds out
if a graphical window can be opened or not.
-------------------------------------------------------------------
Wed Mar 26 12:34:13 CET 2008 - jsmeix@suse.de
- V 2.16.3
- Let "Restart Detection" toggle the autodetection behaviour
(see Novell/Suse Bugzilla bnc#310518).
- Enhanced how hp-setup is launched to be more fail-safe.
In particular added a small C program displaytest which tests
with XOpenDisplay whether or not a X window can be opened
(there is no such tool available in xorg-x11) which makes
yast2-scanner no longer a noarch RPM.
-------------------------------------------------------------------
Tue Mar 25 14:42:30 CET 2008 - jsmeix@suse.de
- V 2.16.2
- Added much better HP all-in-one device support.
Those devices are now autodetected at the USB and if there
is already a CUPS queue (the latter in particular for network
HP all-in-one devices which do not work without a CUPS queue)
and additionally hp-setup can be launched.
- Initially show only USB scanners with known USB IDs.
Show all USB devices which look like scanners only after
"Restart Detection" (see Novell/Suse Bugzilla bnc#310518).
-------------------------------------------------------------------
Wed Mar 19 16:45:38 CET 2008 - jsmeix@suse.de
- V 2.16.1
- Added hint how to set up HP all-in-one network scanners
to the help text (see Novell/Suse Bugzilla bnc#310476).
- Replaced the "scanimage -d ... -T" test
by "scanimage -d ... -v >/dev/null"
(see Novell/Suse Bugzilla bnc#344534).
-------------------------------------------------------------------
Tue Mar 18 12:48:38 CET 2008 - jsmeix@suse.de
- V 2.16.0
- Removed the RPM test for "sane-backends" from
create_scanner_database because all what matters in this script
is whether or not the description files exist.
Furthermore the YaST scanner module tests during startup
if "sane-backends" is installed (and installs it if not).
- Skipped "SCSI via USB" scanners in
test_and_set_scanner_access_permissions
(see Novell/Suse Bugzilla bnc#341565).
- Added more explanatory text for the proprietary iscan driver
on x86_64 (see Novell/Suse Bugzilla bnc#337816).
-------------------------------------------------------------------
Mon Mar 17 12:43:32 CET 2008 - jsrain@suse.cz
- Added 'StartupNotify=true' to the desktop file
(see Novell/Suse Bugzilla bnc#304964).
-------------------------------------------------------------------
Thu Jul 19 15:50:54 CEST 2007 - jsmeix@suse.de
- V 2.15.5
- Replaced "installation source" by "repository" in the texts.
-------------------------------------------------------------------
Wed Jul 18 12:02:31 CEST 2007 - jsmeix@suse.de
- V 2.15.4
- Mentioned in the help text that USB devices which are
no scanners might be detected as a USB scanner
(see Novell/Suse Bugzilla bnc#260991).
-------------------------------------------------------------------
Thu Jun 21 15:12:27 CEST 2007 - jsmeix@suse.de
- V 2.15.3
- Adapted test_and_set_scanner_access_permissions to be prepared
for HPLIP version 2.x.
-------------------------------------------------------------------
Wed Jun 13 16:04:30 CEST 2007 - jsmeix@suse.de
- V 2.15.2
- Adapted test_and_set_scanner_access_permissions according to the
currently newest changes in HAL (see Novell Bugzilla bnc#250659)
and added a test to make sure that the USB verdor and product IDs
do not contain only zeroes (see Novell/Suse Bugzilla bnc#283132).
- Adapted setup_hplip_scanner_service to be prepared for
HPLIP version 2.x (but be backward compatible).
-------------------------------------------------------------------
Fri May 25 13:30:04 CEST 2007 - jsrain@suse.cz
- Removed outdated translations from .desktop-files
(see Novell/Suse Bugzilla bnc#271209).
-------------------------------------------------------------------
Tue Apr 17 14:33:29 CEST 2007 - jsmeix@suse.de
- V 2.15.1
- Added test for Package::Available == nil (when there is no
installation source available).
-------------------------------------------------------------------
Mon Jan 29 14:42:47 CET 2007 - jsmeix@suse.de
- V 2.15.0
- Package 'sane' was renamed into 'sane-backends'.
Package 'hp-officeJet' was dropped.
Adapted it so that it works with 'sane-backends'
and dropped support for 'hp-officeJet'.
-------------------------------------------------------------------
Wed Nov 29 14:42:19 CET 2006 - jsmeix@suse.de
- V 2.14.11
- Fixed test_and_set_scanner_access_permissions to search only
in field 2 of the lsscsi output if it is SCSI type "scanner" and
to search only in field 3 if it is manufactuer "HP" or "EPSON"
(see Novell/Suse Bugzilla bnc#223875).
-------------------------------------------------------------------
Mon Nov 20 11:21:55 CET 2006 - jsmeix@suse.de
- V 2.14.10
- Fixed OverviewDialog() regarding the 'net' meta-backend so that
click 'Edit' or 'Delete' launches the network scanning dialog
if the 'net' meta-backend is used.
- Fixed OverviewContents() so that a (local) autodetected scanner
is show to the user even if its device (e.g. "libusb:001:002")
appears also in the device info of the 'net' meta-backend for a
remote scanner (e.g. "net:192.168.1.2:epson:libusb:001:002").
-------------------------------------------------------------------
Fri Nov 17 10:44:28 CET 2006 - jsmeix@suse.de
- V 2.14.9
- Fixed creation of interface_and_usbid_string in the model_items
list (set interface_and_usbid_string to the empty string if
the scanner has neither SCSI nor USB).
-------------------------------------------------------------------
Thu Nov 16 11:47:01 CET 2006 - jsmeix@suse.de
- V 2.14.8
- Using better syntax for the model preselection code
(regarding access integer values in term types).
-------------------------------------------------------------------
Wed Nov 15 13:00:33 CET 2006 - jsmeix@suse.de
- V 2.14.7
- Improved how a model is preselected in the model_items list.
-------------------------------------------------------------------
Tue Nov 7 09:09:50 CET 2006 - jsmeix@suse.de
- V 2.14.6
- Improved when the the info regarding outdated hpoj pops up.
Moved it from the ActivateBackend function directly into the
SelectModelDialog which avoids that the user must go "Back"
to the SelectModelDialog to select the up-to-date hpaio driver.
- Added a help text regarding the most often reported problem
regarding scanner setup (a driver is set up but no scanner
is recognized by the driver).
-------------------------------------------------------------------
Mon Nov 6 15:22:51 CET 2006 - jsmeix@suse.de
- V 2.14.5
- Improved test_and_set_scanner_access_permissions to make
manufacturer specific entries for SCSI "processors".
- Fixed when the info regarding outdated hpoj pops up (must be
before the hp-officeJet package may get installed).
-------------------------------------------------------------------
Tue Oct 31 15:14:14 CET 2006 - jsmeix@suse.de
- V 2.14.4
- Replaced complicated SetUsbScannerAccessPermissions()
and SetScsiScannerAccessPermissions() functions by a simpler
test_and_set_scanner_access_permissions script and call this
script from a simple SetScannerAccessPermissions() function
(for background info see Novell/Suse Bugzilla bnc#160899).
- Added user information regarding outdated hpoj driver.
- Fixed possible tmp races in some scripts (only $TMP_DATA
was created using mktemp but not $TMP_DATA.raw).
-------------------------------------------------------------------
Mon Sep 11 15:15:02 CEST 2006 - jsmeix@suse.de
- V 2.14.3
- Disable showing Progress from SuSEFirewall::Read call and
SuSEFirewall::Write call to follow "a YaST style"
(see Novell/Suse Bugzilla bnc#202351).
-------------------------------------------------------------------
Fri Aug 18 14:45:47 CEST 2006 - jsmeix@suse.de
- V 2.14.2
- Improved the user information when errors happen in
SetScsiScannerAccessPermissions().
- Changed a misleading map name: "bash_result"->"result"
-------------------------------------------------------------------
Thu Aug 17 16:02:35 CEST 2006 - jsmeix@suse.de
- V 2.14.1
- Improved the automated pre-selection of an autodetected scanner
in the list of all available scanner models.
For USB scanners the "usbid" entries in the desciption files
are used if available. This results often an unique match
so that the matching model can be pre-selected in the list.
For SCSI scanners the first word of the model description
is used as autodetected manufacturer name to show by default
only those SCSI scanners of the list of all available models
where the autodetected manufacturer name is found in the list.
Added a "Show Complete List" button so that the user can
easily access all available models if the automated
pre-selection may result too few models.
- Fixed that empty-looking error messages (e.g. only a linefeed)
are shown to the user.
-------------------------------------------------------------------
Tue Aug 15 11:40:28 CEST 2006 - jsmeix@suse.de
- V 2.14.0
- Increased MAXIMUM_WAIT in test_scanner_backend to 120 seconds
because otherwise it is early aborted for some scanners
which need a long time to warm up the lamp.
- Test also for "hpfax" in DependantPrintQueueExists() function
(see Novell/Suse Bugzilla bnc#184824).
- Fixed SetScsiScannerAccessPermissions(): First enable sane-dev
then (re)start it.
-------------------------------------------------------------------
Thu Mar 23 15:38:06 CET 2006 - jsmeix@suse.de
- V 2.13.16
- Added Confirm::MustBeRoot() to the initial ReadDialog()
which asks a non-root user for confirmation to continue.
-------------------------------------------------------------------
Thu Mar 9 14:07:57 CET 2006 - jsmeix@suse.de
- V 2.13.15
- Applied proofread texts.
-------------------------------------------------------------------
Wed Mar 1 15:46:59 CET 2006 - jsmeix@suse.de
- V 2.13.14
- Removed the user information to re-plug an USB scanner
which was added in V 2.13.13, instead added a resmgr call
to allow normal user access
(see Novell/Suse Bugzilla bnc#153705).
-------------------------------------------------------------------
Mon Feb 27 16:36:26 CET 2006 - jsmeix@suse.de
- V 2.13.13
- Add a uers information to re-plug an USB scanner to trigger
the udev -> HAL -> resmgr chain to allow normal user access
(see Novell/Suse Bugzilla bnc#153705).
-------------------------------------------------------------------
Mon Feb 20 10:13:07 CET 2006 - jsmeix@suse.de
- V 2.13.12
- In yast2-scanner.spec.in replaced
BuildRequires: yast2-devel-packages
with
BuildRequires: docbook-xsl-stylesheets doxygen libxslt
perl-XML-Writer sgml-skel update-desktop-files
yast2 yast2-devtools yast2-testsuite
-------------------------------------------------------------------
Mon Jan 30 11:20:54 CET 2006 - jsmeix@suse.de
- V 2.13.11
- Cleaned up code and user dialog for SUSE Firewall settings.
-------------------------------------------------------------------
Thu Jan 26 16:04:44 CET 2006 - jsmeix@suse.de
- V 2.13.10
- Show "Possibly Problematic Driver" warning for the "epkowa"
backend on x86_64 platforms only when it is used from the
32-bit-only binary-only "iscan" package but not when it is
used from the natively built "iscan-free" package.
- Changed "Firewall not running or would not be started." text
to "Firewall is not or should not be running."
(see Novell/Suse Bugzilla bnc#145522).
-------------------------------------------------------------------
Wed Jan 25 12:15:16 CET 2006 - jsmeix@suse.de
- V 2.13.9
- Increased MAXIMUM_WAIT in determine_active_scanners and
in test_scanner_backend to 60 seconds because otherwise it is
early aborted for some scanners which need firmware upload
or which need a long time to warm up the lamp.
-------------------------------------------------------------------
Tue Jan 24 15:38:32 CET 2006 - jsmeix@suse.de
- V 2.13.8
- Applied proofread texts.
-------------------------------------------------------------------
Fri Jan 20 12:53:58 CET 2006 - jsmeix@suse.de
- V 2.13.7
- Avoid duplicate entries in .../80-scanner.fdi
-------------------------------------------------------------------
Tue Jan 17 15:21:06 CET 2006 - jsmeix@suse.de
- V 2.13.6
- Fixed test_scanner_backend and setup_ptal_scanner_service.
- Changed SetUsbScannerAccessPermissions() to write at least
the comment how to create entries in .../80-scanner.fdi
-------------------------------------------------------------------
Mon Jan 16 12:17:56 CET 2006 - jsmeix@suse.de
- V 2.13.5
- Changed SetUsbScannerAccessPermissions() to write
/etc/hal/fdi/policy/10osvendor/80-scanner.fdi
(see Novell/Suse Bugzilla bnc#142859).
-------------------------------------------------------------------
Fri Dec 2 09:51:37 CET 2005 - jsmeix@suse.de
- V 2.13.4
- Fine-tuning user dialog regarding support for SUSE Firewall.
-------------------------------------------------------------------
Tue Nov 29 16:04:01 CET 2005 - jsmeix@suse.de
- V 2.13.3
- Bugfixes regarding support for SUSE Firewall.
-------------------------------------------------------------------
Fri Nov 25 11:28:25 CET 2005 - jsmeix@suse.de
- V 2.13.2
- Bugfixes and enhancements regarding support for SUSE Firewall.
-------------------------------------------------------------------
Thu Nov 24 17:02:54 CET 2005 - jsmeix@suse.de
- V 2.13.1
- Added support for SUSE Firewall.
-------------------------------------------------------------------
Wed Nov 16 12:05:20 CET 2005 - jsmeix@suse.de
- V 2.13.0
- Added support for iscan-free.
-------------------------------------------------------------------
Fri Aug 26 10:52:53 CEST 2005 - jsmeix@suse.de
- V 2.12.16
- Simplified how USB scanner access is set up for resmgr:
Ignore whether or not an autodetected USB scanner can be
recognized also as active scanner.
I.e. simply grant access to all autodetected USB scanners
(comment dated 2005-08-26 03:00 MST
in Novell/Suse Bugzilla bnc#100695).
-------------------------------------------------------------------
Thu Aug 25 09:59:16 CEST 2005 - jsmeix@suse.de
- V 2.12.15
- Change the method how USB scanner access is set up for resmgr
from a generic method (using a fixed entry) to a model-specific
method using USB vendor and product IDs
(see Novell/Suse Bugzilla bnc#100695).
-------------------------------------------------------------------
Thu Aug 18 15:50:50 CEST 2005 - jsmeix@suse.de
- V 2.12.14
- Avoid to show duplicate manufacturer name when it is also a part
of the model name like in "EPSON Epson Perfection 123".
- Fix killing of the time bomb in setup_ptal_scanner_service.
-------------------------------------------------------------------
Wed Aug 17 12:00:16 CEST 2005 - jsmeix@suse.de
- V 2.12.13
- Changed "/sbin/lsusb" to "/usr/sbin/lsusb" in the help text.
-------------------------------------------------------------------
Tue Aug 16 10:26:33 CEST 2005 - jsmeix@suse.de
- V 2.12.12
- Applied proofread texts.
-------------------------------------------------------------------
Tue Aug 9 16:52:22 CEST 2005 - jsrain@suse.cz
- fixed icon name in .desktop file,set title icon (#103024)
- unify help with menu button label (#103026)
- 2.12.11
-------------------------------------------------------------------
Fri Aug 5 11:31:02 CEST 2005 - jsmeix@suse.de
- V 2.12.10
- Changed from old Wizard_hw to new WizardHW design.
- Implemented new resmgr handling to allow normal users
to access USB scanners (bug 100695).
- Several minor improvements
(e.g. restart detection when test failed,
nicer model name for detected scanners, ...)
-------------------------------------------------------------------
Thu Jul 28 11:54:43 CEST 2005 - jsmeix@suse.de
- V 2.12.9
- Applied proofread texts.
-------------------------------------------------------------------
Thu Jul 28 10:36:07 CEST 2005 - jsmeix@suse.de
- V 2.12.8
- Applied proofread scanner.desktop file.
-------------------------------------------------------------------
Mon Jul 11 13:27:01 CEST 2005 - jsmeix@suse.de
- V 2.12.7
- Added a "restart detection" functionality in the SummaryDialog.
- Did some minor text changes.
-------------------------------------------------------------------
Wed Jul 6 14:26:32 CEST 2005 - jsmeix@suse.de
- V 2.12.6
- Added tests whether dependant CUPS print queues exists
and show user information if there are conflicts because
of dependant CUPS print queues.
This happens only for HP all-in-one devices and their required
services hplip or ptal which cannot run at the same time.
-------------------------------------------------------------------
Fri Jul 1 15:31:36 CEST 2005 - jsmeix@suse.de
- V 2.12.5
- Refined the proofread texts.
- Added many hints and explanations for translators.
- Improved the comments for autogenerated documentation.
- Improved details in tools/*
- Improved details in Scanner.ycp and dialogs.ycp
-------------------------------------------------------------------
Wed Jun 29 16:36:02 CEST 2005 - jsmeix@suse.de
- V 2.12.4
- Merged the proofread texts.
-------------------------------------------------------------------
Fri Jun 24 12:48:21 CEST 2005 - jsmeix@suse.de
- V 2.12.3
- Added and improved help texts for scanning in the network.
-------------------------------------------------------------------
Tue May 24 16:08:54 CEST 2005 - jsmeix@suse.de
- V 2.12.2
- If the scanner was autodetected and when the manufacturer name
is known, the search string is preset with the manufacturer name
so that only the scanners which match to the autodetected
manufacturer are listed.
- Workaround for strange problem (Bug #75709):
Sometimes AutodetectScanners (i.e. "sane-find-scanner") doesn't
detect a scanner but usually it works well for a second attempt.
Therefore AutodetectScanners is simply called one second time
if it didn't detect a scanner on the first run.
-------------------------------------------------------------------
Fri May 20 12:30:07 CEST 2005 - jsmeix@suse.de
- V 2.12.1
- Added popup messages regarding iscan/epkowa problems for x86_64
and for non-i386-compatible architectures (bug #73985).
- Introduced translatable support status strings (bug #73780).
-------------------------------------------------------------------
Wed May 18 13:37:40 CEST 2005 - jsmeix@suse.de
- V 2.12.0
- Fixed a bug to to find SCSI scanners (avoid false positives).
- Made the "sed" calls in create_scanner_database look nicer.
- Removed the needless additional Popup::TimedOKCancel(...)
confirmation request before installing additional packages.
- Added "Progress:..." in ActivateBackend() (Bug #74446).
-------------------------------------------------------------------
Wed Mar 2 14:20:09 CET 2005 - jsmeix@suse.de
- V 2.11.6
- Applied proofread texts.
- Additionally changed only 'arive' to 'arise' in helps.ycp
-------------------------------------------------------------------
Mon Feb 28 11:52:42 CET 2005 - jsmeix@suse.de
- V 2.11.5
- Removed already configured scanners (i.e. active scanners)
from list of shown autodetected scanners.
- Added time bombs where external programs may hang up.
- Several bug fixes.
-------------------------------------------------------------------
Tue Feb 15 10:39:03 CET 2005 - jsmeix@suse.de
- V 2.11.4
- Improved support for scanning via network.
- Several bug fixes.
- Improved the help texts.
-------------------------------------------------------------------
Thu Feb 10 10:30:29 CET 2005 - jsmeix@suse.de
- V 2.11.3
- Added support for network scanning
-------------------------------------------------------------------
Mon Feb 7 17:51:26 CET 2005 - jsmeix@suse.de
- V 2.11.2
- Added proofread texts.
- Added support for /etc/init.d/sane-dev
-------------------------------------------------------------------
Fri Feb 4 16:19:21 CET 2005 - jsmeix@suse.de
- V 2.11.1
- Added HPLIP support.
-------------------------------------------------------------------
Mon Jan 31 11:47:15 CET 2005 - jsmeix@suse.de
- V 2.11.0
- Created the help texts.
- Added search function (filter) for the model list.
-------------------------------------------------------------------
Tue Jan 18 10:42:49 CET 2005 - jsmeix@suse.de
- V 2.10.99 (will become 2.11.0)
- Complete rewrite from scratch.
Nothing is used from the old sources
(except the old changelog entries below).
-------------------------------------------------------------------
Fri Aug 27 14:51:17 CEST 2004 - jsmeix@suse.de
- V 2.10.5
- Applied proofread texts.
-------------------------------------------------------------------
Mon Aug 23 16:40:57 CEST 2004 - jsmeix@suse.de
- V 2.10.4
- Define a fallback scanner (in scanner_manual.ycp)
so that the vendor and model list is not empty
even if no scanner was autodetected and
show a warning popup which defaults to abort.
-------------------------------------------------------------------
Fri Aug 13 09:46:49 CEST 2004 - jsmeix@suse.de
- V 2.10.3
- Fixed the bug that when an USB scanner was not autodetected
during startup then the manufacturer and model selection list
has been empty. Nevertheless the list is still empty if no
USB scanner can be detected during manual USB scanner setup.
This is o.k. because without USB vendor and model id the
scanner cannot be made accessible for normal users by resmgr.
- Applied proofread texts.
-------------------------------------------------------------------
Tue Aug 3 14:30:55 CEST 2004 - jsmeix@suse.de
- V 2.10.2
- In Scanner.ycp and scanner_new:
Added popup which explains what to to regarding access USB
scanners for normal users.
- Fixed several syntax errors which are shown by running
/usr/bin/ycpc -qE -M. -I. *.ycp
in the src directory.
- Added @moduledir@/Scanner* and @clientdir@/scanner*
to yast2-scanner.spec.in so that it builds in autobuild.
-------------------------------------------------------------------
Mon Aug 2 16:51:49 CEST 2004 - jsmeix@suse.de
- V 2.10.1
- In Scanner.ycp and scanner_new:
Write USB vendor and model entries to /etc/sane.d/<driver>.conf
and to /etc/hotplug/usb/sane.usermap and test before whether
such an entry already exists.
- Added several "import ..." so that "y2tool check_ycp src/*.ycp"
does no longer warn regarding used but not imported stuff.
- Fixed two errors regarding ScannerAutoSequence:
Wrong type ("any" instead of "symbol" in wizards.ycp).
Missing "include" of wizards.ycp in scanner_proposal.ycp.
-------------------------------------------------------------------
Thu Jul 1 12:23:43 CEST 2004 - jsrain@suse.cz
- modified the code layout to use YCP module for storing data, added
clients for autoinstallation and proposal (not working because of
further needed changes in the Scanner.ycp module)
-------------------------------------------------------------------
Fri Jun 18 13:47:15 CEST 2004 - gs@suse.de
- V 2.10.0
- CVS 9.1 branch merged to head
-------------------------------------------------------------------
Wed May 5 14:23:45 CEST 2004 - gs@suse.de
- V 2.9.17
- messages from proof reading merged back
-------------------------------------------------------------------
Tue May 4 15:58:12 CEST 2004 - gs@suse.de
- V 2.9.16
- set scanner driver in manual configuration dialog (bug #39940)
-------------------------------------------------------------------
Wed Apr 7 18:14:24 CEST 2004 - gs@suse.de
- V 2.9.15
- bugfix for #38634 (remove blank in scanner_notfound.ycp)
-------------------------------------------------------------------
Fri Apr 2 16:11:52 CEST 2004 - gs@suse.de
- V 2.9.14
- license changed to GPL
-------------------------------------------------------------------
Thu Apr 1 13:09:31 CEST 2004 - gs@suse.de
- V 2.9.13
- recognize HP all-in-one devices correctly
-------------------------------------------------------------------
Wed Mar 24 16:32:40 CET 2004 - gs@suse.de
- V 2.9.12
- scannerDB.pm: config file editing improved (maintained copies of
the /etc/sane.d/<driver>.conf files are not necessary any longer)
-------------------------------------------------------------------
Mon Mar 22 17:07:39 CET 2004 - gs@suse.de
- V 2.9.11
- scannerDP.pm: template for plustek driver corrected
-------------------------------------------------------------------
Fri Mar 12 09:45:01 CET 2004 - gs@suse.de
- V 2.9.10
- bugfix: call correct dialog on Add button
-------------------------------------------------------------------
Tue Mar 9 15:27:18 CET 2004 - gs@suse.de
- V 2.9.9
- adapt to stricter type checking of YCP interpreter
-------------------------------------------------------------------
Mon Mar 8 18:35:42 CET 2004 - msvec@suse.cz
- use Sequencer and Service
- set title icon
-------------------------------------------------------------------
Mon Mar 8 16:14:38 CET 2004 - gs@suse.de
- V 2.9.8
- adapt USB scanning to libusb usage (kernel 2.6)
-------------------------------------------------------------------
Tue Mar 2 16:30:16 CET 2004 - gs@suse.de
- V 2.9.7
- messages from proofreading merged back
-------------------------------------------------------------------
Mon Mar 1 10:10:29 CET 2004 - gs@suse.de
- V 2.9.6
- installation of HP all-in-one devices improved
-------------------------------------------------------------------
Thu Feb 26 17:00:36 CET 2004 - gs@suse.de
- V 2.9.5
- check for status "unsupported" (scannerDP.pm)
-------------------------------------------------------------------
Thu Feb 26 13:25:52 CET 2004 - gs@suse.de
- V 2.9.4
- don't call scanner USB dialog (scanner.o is obsolete)
-------------------------------------------------------------------
Mon Feb 09 17:39:23 CET 2004 - arvin@suse.de
- removed config files (*.y2cc)
-------------------------------------------------------------------
Fri Jan 30 16:40:43 CET 2004 - msvec@suse.cz
- NI fixes
- 2.9.2
-------------------------------------------------------------------
Fri Nov 21 13:56:04 CET 2003 - gs@suse.de
- V 2.9.1
- install kdegraphics3-scan (Kooka)
- some text/layout improvements
- don't show hubs in USB dialog
-------------------------------------------------------------------
Tue Sep 9 15:57:57 CEST 2003 - gs@suse.de
- V 2.8.13
- activate service hotplug (instead of hotplug_usb)
-------------------------------------------------------------------
Mon Sep 8 09:39:48 CEST 2003 - gs@suse.de
- V 2.8.12
- merge texts from proof read, remove non UTF-8 letter from comment
-------------------------------------------------------------------
Tue Sep 2 10:46:38 CEST 2003 - gs@suse.de
- V 2.8.11
- improve the installation of HP all-in-one devices
-------------------------------------------------------------------
Mon Sep 1 15:49:34 CEST 2003 - gs@suse.de
- V 2.8.10
- popups added for scanners which require a firmware upload
-------------------------------------------------------------------
Fri Aug 29 14:12:56 CEST 2003 - gs@suse.de
- V 2.8.9
- add a popup which informs the user to configure JetDirect manually
-------------------------------------------------------------------
Tue Aug 26 14:37:50 CEST 2003 - gs@suse.de
- V 2.8.8
- activate services hotplug_usb and ptal for HP all-in-one devices
-------------------------------------------------------------------
Thu Aug 21 15:39:54 CEST 2003 - gs@suse.de
- bugfix in scannerDB.pm ( correct path is: /usr/bin/scanimage )
-------------------------------------------------------------------
Mon Aug 18 18:11:09 CEST 2003 - arvin@suse.de
- use String::CutBlanks
-------------------------------------------------------------------
Mon Aug 11 09:02:36 CEST 2003 - gs@suse.de
- V 2.8.5
- merge texts from proofread
-------------------------------------------------------------------
Wed Aug 6 11:29:56 CEST 2003 - gs@suse.de
- V 2.8.4
- identify HP all-in-one in hwinfo scanner list
-------------------------------------------------------------------
Sat Aug 02 20:41:22 CEST 2003 - arvin@suse.de
- added desktop file
-------------------------------------------------------------------
Wed Jul 23 13:12:09 CEST 2003 - gs@suse.de
- V 2.8.2
- support of HP all-in-one devices
- internal: use new perl interface (ag_sane, ag_scanner)
- file scanner.desktop added
-------------------------------------------------------------------
Fri Mar 14 13:56:41 CET 2003 - gs@suse.de
- parse external scanner descriptions, too, to get the complete
scanner list (support of HP Office Jet scanners)
-------------------------------------------------------------------
Thu Mar 6 13:57:17 CET 2003 - gs@suse.de
- bugfix in scannerDB.pm (correct initialization of $oriline)
bug #24833
-------------------------------------------------------------------
Mon Mar 3 14:52:03 CET 2003 - gs@suse.de
- help text corrected
-------------------------------------------------------------------
Mon Feb 17 16:34:01 CET 2003 - gs@suse.de
- write USB scanner data to /etc/hotplug/usb/sane.usermap
-------------------------------------------------------------------
Mon Feb 10 16:27:43 CET 2003 - gs@suse.de
- scanner database now is dynamically created from
SANE scanner description files
-------------------------------------------------------------------
Mon Nov 18 16:25:08 CET 2002 - gs@suse.de
- provide SCR::Dir(.sane), SCR::Dir(.scanner),
improve, update the help text
-------------------------------------------------------------------
Mon Sep 9 12:09:30 CEST 2002 - freitag@suse.de
- removed some nasty warnings on console (bug #19090)
disabled Test-Button while scanning to avoid 'double' clicks
-------------------------------------------------------------------
Wed Sep 4 14:32:37 CEST 2002 - mvidner@suse.cz
- Don't use a temporary file when calling sw_single.
- 2.6.7
-------------------------------------------------------------------
Tue Sep 3 15:14:25 CEST 2002 - gs@suse.de
- fixed config template for plustek, i.e. wellknown Epson perfection 1650
-------------------------------------------------------------------
Tue Aug 27 20:00:00 CEST 2002 - jsuchome@suse.cz
- provide/obsolete old translation packages
-------------------------------------------------------------------
Mon Aug 19 17:37:09 CEST 2002 - gs@suse.de
- more scanner supported (sane-1.0.8)
-------------------------------------------------------------------
Mon Jul 29 15:12:59 CEST 2002 - gs@suse.de
- comments for translators added
-------------------------------------------------------------------
Mon Jul 29 11:28:01 CEST 2002 - gs@suse.de
- remove yast2-runlevel from Requires list
- internal changes (remove obsolete include file)
-------------------------------------------------------------------
Fri Jul 12 16:32:36 CEST 2002 - arvin@suse.de
- use proper namespace for Args and CallFunction (#16776)
-------------------------------------------------------------------
Fri Jul 05 12:07:48 CEST 2002 - arvin@suse.de
- moved non binary files to /usr/share/YaST2
-------------------------------------------------------------------
Tue Jul 2 16:39:12 CEST 2002 - msvec@suse.cz
- renamed to yast2-scanner
- 2.6.0
-------------------------------------------------------------------
Tue Mar 26 14:02:20 CET 2002 - gs@suse.de
- (#15510) mark installed scanner as configured for hardware detection
-------------------------------------------------------------------
Mon Mar 25 15:51:36 CET 2002 - kkaempf@suse.de
- use 'config aware' libhd calls when probing for usb/scsi devices
(#15483).
-------------------------------------------------------------------
Tue Mar 19 14:02:25 CET 2002 - gs@suse.de
- bugfixes: the test scan for network scanners is working again,
ignore case while comparing installed and connected scanner
- removed dependency on ImageMagick tool convert since the image
widget is now able to scale by itself
- #14937: it is possible now to close the scanner configuration with
the window manager
-------------------------------------------------------------------
Fri Mar 15 11:02:02 CET 2002 - gs@suse.de
- reworked the config file templates to use the ones from 1.0.7
(fixing bug #14899)
- parenthesises removed since they break the ycp-perl interface
-------------------------------------------------------------------
Fri Mar 1 15:03:30 CET 2002 - gs@suse.de
- some internal changes and bugfixes (hwinfo now also detects
SCSI scanner, look for exactly matching key in scanner map,
use correct key "scanner_driver")
-------------------------------------------------------------------
Mon Feb 25 15:44:28 CET 2002 - gs@suse.de
- scannerDB: adapt to sane version 1.07
-------------------------------------------------------------------
Mon Feb 18 17:32:31 CET 2002 - freitag@suse.de
- bugfix: Printing lines with only comments again, which were blank
before. Changed call to scanimage for sane version 1.0.7
-------------------------------------------------------------------
Tue Feb 5 11:07:17 CET 2002 - gs@suse.de
- bugfix for the scanner agent, internal changes in ycp modules,
- enable service "sane" if a SCSI scanner is connected
-------------------------------------------------------------------
Mon Feb 4 15:20:46 CET 2002 - freitag@suse.de
- removed bug that skips the bus in the device file line in the
scanner conf, makes /dev/usbscanner from usb /dev/usbscanner
- checked the database for sane 1.0.6
-------------------------------------------------------------------
Thu Nov 8 10:24:27 CET 2001 - freitag@suse.de
- changed writeConfig-sub to do not write a comment after the device
file in the backend.conf file in /etc/sane.d. The comment confuses
at least the mustek and the snapscan backend (bug #12063)
- added mkdir /var/lib/sane to the function that writes the devices
file in the directory for sane's rcscript. If the directory does
not exist, the file could not be written which causes a problem
with the rcscript on system shutdown
- added mustek_usb to the available drivers list.
- corrected path in revertAll from /var/log/sane to /var/lib/sane.
- added snapscan 1236U to the scanner DB
-------------------------------------------------------------------
Thu Sep 20 19:08:03 CEST 2001 - gs@suse.de
- multiple scanner tests are possible (bug #11026)
- permissions of /dev/sg? are set correctly to 666 (bug #11035)
-------------------------------------------------------------------
Tue Sep 18 16:59:58 CEST 2001 - freitag@suse.de
- write /etc/hotplug/usb.usermap for scanners not automatically detected.
Makes the correct module loaded and unloaded on mounting or
unmounting of the device.
- better recognition of scanners by whitespace insensitive pattern match.
- added config-template for USB-mustek scanners, they were accidential
missing.
-------------------------------------------------------------------
Fri Sep 14 15:33:02 CEST 2001 - freitag@suse.de
- manual USB scanner install works for Scanners not reporting a
proper vendor/model name
-------------------------------------------------------------------
Wed Sep 12 10:26:17 CEST 2001 - freitag@suse.de
- fixed bugs in reverting the installation, created files for the
sane startup and shutdown scripts that fix permissions.
Bugfix that removes temporaer files, setting the sane permission
fix variable in rc.config and behaviour in case no scsi device
was found in manual scanner configuration (bzilla #10310)
-------------------------------------------------------------------
Tue Sep 4 17:06:53 CEST 2001 - freitag@suse.de
- installation of scsi and usb scanners work now, deletion is also
working. Networkstation-scanners will be detected and installed.
Abort also works.
-------------------------------------------------------------------
Mon Aug 20 19:31:00 CEST 2001 - gs@suse.de
- installation works (except setting the permissions of /dev/sg_
or /dev/usbscanner to 666),
manual installation needs some more work,
delete an scanner configuration does not work
-------------------------------------------------------------------
Mon Aug 6 12:23:52 CEST 2001 - gs@suse.de
- workflow dialogs completed - but not yet with full functionality
-------------------------------------------------------------------
Thu Mar 22 09:27:24 CET 2001 - gs@suse.de
- initial version
