File mshv.changes of Package mshv
-------------------------------------------------------------------
Sat Dec 27 14:28:16 UTC 2025 - Walter Fey <dl8fcl@darc.de>
- update to version 2.76.4
Changed: FT8 Decoder, for better performance.
Changed: The report time for PSKReporter to start time of decoded message,
for FT8/4 and Q65 modes (at the request of Philip, the owner of
PSKReporter).
Corrected: In MSK144, Hide/Unhide "TX FIRST"/"TX SECOND" buttons.
More work on Super Fox decoder (for Super Hound) (seeds tracking).
-------------------------------------------------------------------
Tue Jun 10 12:56:48 UTC 2025 - Walter Fey <dl8fcl@darc.de>
- update to version 2.76.3
Added: In Network Configuration, Dx-Spot Settings, password field, for
Dx clusters that require a password.
Corrections: In Decode List Filters, for better recognizing call prefix
with slashes e.g.(LZ2HV/B).
Added: New random noise generator (different from, standard generator),
in Super Fox decoder, for greater sensitivity.
Added: In Auto logging information, possibility to add your own auto-login
comment, if Turn Off Auto Comments and Enable Auto logging info,
options.
-------------------------------------------------------------------
Tue Apr 15 11:00:34 UTC 2025 - Walter Fey <dl8fcl@darc.de>
- update to version 2.76.2
Optimization: Super Fox decoder, for greater sensitivity.
Added: In Super Fox decoder, sorting candidates for decoding.
Corrections: In TCI protocol, if work long time application crash.
Added: WSPR frequencies is restricted for TXing, in Multistream and Super
Fox mode.
Corrected: Application crash if using nonstandard and compound call signs, in
Multistream and Super Fox mode. "Application crash during a super
big pileup.", reported by Dominik from 5N9DTG DXpedition.
Corrected: In Super Hound and Super Fox mode, logic for working with
nonstandard and compound call signs.
Added: In TCI protocol support, audio sampling rate and control for buffering
audio stream on TX.
-------------------------------------------------------------------
Tue Feb 25 14:12:06 UTC 2025 - Walter Fey <dl8fcl@darc.de>
- update to version 2.76.1
Added: In the version of MSHV, PATCH version e.g(v.2.76.1), for more info
https://semver.org/.
Added: Emitting RIG info to PSK Reporter, for more info
https://pskreporter.info/cgi-bin/pskstats.pl#equipment_in_use
Added: In Interface Control RIGs, Icom IC-7760, Yaesu FTX-1F,
FlexRadio SmartSDR Slice A-H TCP, Guohe Q900/PMR-171/TBR-119,
Ailunce HS2/HS3 and Radioddity QR20 support.
Added: In Settings, Network configuration Page 2, Group box "OTP Settings".
Added: OTP verification for, "Multi Answering Auto Seq Protocol DXpedition"
(multistream). Start and stop TXing OTP key, is in "Multi Answer" mode,
settings tab.
Added: Super Hound and Super Fox.
-------------------------------------------------------------------
Sat Aug 31 19:10:24 UTC 2024 - Walter Fey <dl8fcl@darc.de>
- update to version 2.75
Corrected: Exception, Non-Standard Call sign, that is а valid QRA Locator
(e.g. RP79AA) and TXing Special MSG: A2AA RR73; B2BB <RP79AA> +05,
In DXpedition mode.
Added: In Interface Control, option for controlling RIG Modes, (USB, DIGU),
for old Yaesu CAT protocols.
Added: In Options, Decode Lists Options, Log Options, Auto Logging Info
Settings, for auto adding satellite QSOs information.
Added: Right click to button ADD TO LOG, for fast access to Auto Logging
Info Settings.
Added: Saving settings for Auto Logging Info.
-------------------------------------------------------------------
Sun Mar 31 11:54:11 UTC 2024 - Walter Fey <dl8fcl@darc.de>
- update to version 2.74
Changed: If Mode is Q65 astronomical data will be showing as in mode Q65.
Added: In Interface Control, option for controlling RIG Modes, (USB, DIGU).
Added: Support for TCI protocol v. 1.10.0 (ESDR3).
Added: In Macros, new Activity Type "ARRL International EME Contest" and
Cabrillo export, support for ARRL International EME Contest, for JT65,
Q65, MSK and FT modes.
Added: In Network Configuration, "eQSL Real-Time Upload Logged QSO".
Added: In Language Menu, "Czech" translated by Miroslav Skoda OK1ABB.
Added: In Options, menu for fast band switching "Band Switcher Buttons".
You can choose you favorite bands, and use or not this option.
-------------------------------------------------------------------
Mon Nov 13 18:47:05 UTC 2023 - Walter Fey <dl8fcl@darc.de>
- update to version 2.73
Added: In Options, Decode Lists Options, Show/Hide Country Column, menu for
FT8/4, MSK and Q65 modes.
Added: Command line option, (--inst-name=) for supporting multi-instance
operations, with message aggregators software programs.
Added: Options in Log, for supporting satellite QSOs.
For this reason, IMPORTANT: MANY CHANGES ADDED IN LOG WIDGET. FOR THIS
REASON, PLEASE MAKE A BACKUP COPY IN ADIF OF YOUR LOG BEFORE USING
THIS VERSION. AFTER STARTING NEW VERSION, AND IF QSOs IN LOG ARE
MISSING, USE THE "ADD ADIF TO LOG" FUNCTION TO ADD YOUR PREVIOUSLY
SAVED QSOs.
Added: In Interface Control, option for controlling RIG polling interval.
Added: In Interface Control, option "Enable Read DTR ON" to use DTR signal
for (Handshake), for old CAT interfaces as CT17 from Icom.
Added: In Interface Control, RIG "Icom IC-905" support.
Added: In Options, Network Configuration, option "Write Status In To File",
file name is mshv_status.txt, for software programs, for
antenna rotators.
Added: Decode List Filters option, "Use Filters For Automatic Sequencing
Answer".
-------------------------------------------------------------------
Mon Jul 31 16:08:25 UTC 2023 - Walter Fey <dl8fcl@darc.de>
- update to version 2.72
Added: In Options, Other Options, "Turn On Mouse Markers", "Turn On RX
Markers", "Turn On TX Markers" for modes FT and Q65.
Added: In Macros, Activity Type "NCCC Sprint".
Improvements of Fourier transform libraries for Windows.
Added: In Options, Decode Lists Options, Show/Hide Frequency Column,
menu for FT8/4 and FSK modes.
Added: In Options, Decode Lists Options, Show/Hide Time Column, menu
for FT8/4 modes.
Added: In Options, Decode Lists Options, Show/Hide Distance Column,
menu for FT8/4 and FSK modes.
Changed: "Multi Answering Auto Seq Protocol Standard" if TX in first
period, no slots limits, if HF band is present and TX in second
period, only one slot is possible.
-------------------------------------------------------------------
Tue Apr 25 07:14:43 UTC 2023 - Walter Fey <dl8fcl@darc.de>
- update to version 2.71
- Improvements of FT8/4 decoder for new internal data transfer, 24-bit (raw data).
Added: In "Multi Answering Auto Seq Protocols", Settings, CQ Types, SOTA,
POTA, BOTA, and IOTA.
Added: In Interface Control, NET RigCtl protocol support.
Added: In "Multi Answering Auto Seq Protocols", "Text Highlight" for
His Call Sign.
Corrected: Critical error in Q65/120 seconds decoder.
Changed: In "Multi Answering Auto Seq Protocols":
"Multi Answering Auto Seq Protocol DXpedition" TX is possible
only in the first period.
"Multi Answering Auto Seq Protocol Standard" if TX is in the first
period, no slots limits, if TX is in the second period, only one
slot is possible.
-------------------------------------------------------------------
Wed Feb 15 07:36:58 UTC 2023 - Walter Fey <dl8fcl@darc.de>
- update to version 2.70
- Major changes in internal application data transfer, raw data (sound streams)
in MSHV 2.70 is 24 Bit, (old = 16 Bit).
Added: In Sound Settings Input and Output, Box "Bits Per Sample: 16 Bit or
24 Bit or 32 Bit" for TX and RX sampling. IMPORTANT: for this reason
Sound Settings will be resetted to default.
Corrected: In 77-bit protocol, calls with same 10-bit and 12-bit hash sums
exception, reported by Stelios SV8BHN.
Added: In "Multi Answering Auto Seq Protocols", Settings, two auto sorting
methods for Queue list, by distance or signal report. IMPORTANT: for
this reason "Multi Answering Auto Seq Protocols", settings, be
resetted to default.
Changed: In 77-bit protocol, ARRL Field Day and Roundup decoding/encoding
exchanges. IMPORTANT: For this reason in contest activities, need
to use new versions of all softwares.
-------------------------------------------------------------------
Fri Dec 23 15:18:23 UTC 2022 - Walter Fey <dl8fcl@darc.de>
- update to version 2.69
Corrected: In "Multi Answering Auto Seq Protocols", if using "Special MSG:
A2AA RR73; B2BB <C2CC> +05" TX error, reported by Pit YO3JW.
Added: In "Multi Answering Auto Seq Protocols", Settings, possibility to
change the, SpinBox "Max Time" to "Max Periods", by double mouse
clicking.
Added: In Network Configuration, "QRZ Logbook Real-Time Upload Logged QSO".
IMPORTANT: for this reason Club Log, E-Mail and Password will be
resetted. The MSHV team would like thank to QRZ Support Team, for the
30 day test XML subscription.
Added: In "Decode List Filters FT8/4", Checkbox "USE Button FILTERS ON/OFF"
for fast filter switching.
Corrected: Some issues with a priori (AP) decoding, in FT8 decoder.
Added: In function, "Single Click On Call Shows Country Info", recognition
for "individual calls" and "individual calls with slashes". For this
reason database rows is changed from ~7000 to ~20000.
Added: In "Decode List Filters FT8/4", filter option, "Hide QSO B4 Messages".
Fixed: In TCI protocol, compatibility with ESDR2, reported by Sergey RJ7M.
Added: In Interface Control, RIGs "Xiegu: G90,X108G,X5105,X6100" support.
-------------------------------------------------------------------
Thu Nov 10 23:58:42 UTC 2022 - Walter Fey <dl8fcl@darc.de>
- update to version 2.68
Added: Support for spots to PSK Reporter with 5 bytes frequencies up to
1000 GHz. The MSHV team would like to thank Philip Gladstone,
developer of PSK Reporter, for his assistance.
Added: In Network Configuration, "Club Log Real-Time Upload Logged QSO".
Information: If you have network connection problems, MSHV will show
a pop-up info, then creates a file with all unpublished QSOs
"mshvlog_clublog_error.adi", this file location is in the MSHV log
directory. Once you have fixed the network connection issues, there is
no problem uploading this file manually in the Club Log web interface.
Added: In Log Menu function, Upload Selected QSOs To Club Log (file upload).
Remark: Do not use this function to upload only one QSO, because
Club Log will block excessive uploads of small files misuse of this
feature causes congestion for other, normal uploads. Thanks for your
understanding. The MSHV team would like to thank Michael G7VJR,
developer of Club Log, for his assistance.
Added: In Network Configuration new UDP port, "Simple UDP Broadcast",
for Logged QSOs formatted as ADIF message.
Added: In "Multi Answering Auto Seq Protocol DXpedition" Settings CQ Types,
"CQ MDX", MSHV recommended identification for DXpeditions.
-------------------------------------------------------------------
Tue Sep 20 07:17:41 UTC 2022 - Walter Fey <dl8fcl@darc.de>
- update to version 2.67
Added: Support for TCI protocol 1.9 (ESDR3).
Changed: For MSK144, default period from 15 sec. to 30 sec.
Added: In Options, menu for fast mode switching "Mode Switcher Buttons".
You can choose you favorite modes, and use or not this option.
Enabled: For MSK modes, function "Single Click On Call Shows Country Info".
-------------------------------------------------------------------
Mon Jul 11 16:59:50 UTC 2022 - Walter Fey <dl8fcl@darc.de>
- update to version 2.66
Added: In Log Menu, if "Use Save QSOs In ADIF Log" option is enabled, QSOs
will be saved in the log directory with filename mshvlog.adi. By
default this option is On.
Added: In "Text Highlight", highlighting several Call signs, (Call: Minimum
3 characters).
Changed: For "Multi Answering Auto Seq Protocols", checkbox duplicate QSOs
(No Dupe), is changed to menu, Maximum QSOs per Call, with options
"No Limit", "1 QSO", "2 QSOs" and "3 QSOs".
Added: In "Decode List Filters FT", filter option (Hide Messages From
"Unknown" Country).
-------------------------------------------------------------------
Thu May 12 21:18:11 UTC 2022 - Walter Fey <dl8fcl@darc.de>
- update to version 2.65
Corrected: Wrong highlighting on My Call, if My Call exist in my Log
(QSO before), reported by Robert SP8SN.
Added: Support for FreeBSD amd64, suggested and tested by Eduardo LU9DCE.
Added: In the Band Menu, "560 M - 501 kHz", "8 M - 40 MHz", "5 M - 60 MHz"
for this reason all TX levels must be set again.
Source code оptimization.
-------------------------------------------------------------------
Sun Mar 13 13:03:00 UTC 2022 - Walter Fey <dl8fcl@darc.de>
- update to version 2.64
* Minor changes in Interface Control, for TCI Clients and compatibility in
HPSDR Thetis software.
Corrected: Wrong static TX frequency, if start app from FSK and change
to FT or Q65 modes.
Added: For modes Q65, function "Use Selected Constant TX Audio Frequency".
Changed: In Macros, Activity Type FT4 DX and FT8 DX Contests, for new
contest rules from 2022.
-------------------------------------------------------------------
Tue Feb 22 08:45:18 UTC 2022 - Walter Fey <dl8fcl@darc.de>
- update to version 2.63
Changed: In Macros, Activity Type "RTTY Roundup" to "ARRL International
Digital Contest". More information can be found here
http://www.arrl.org/news/arrl-announces-new-world-wide-digital-contest
and here http://arrl.org/arrl-digital-contest .
Added: In front panel application, the button is used to set RX frequency to
TX frequency and set TX frequency to RX frequency.
Changed: "Text Highlight" for modes (FT8/4, MSK, Q65) will not highlight
in green color (CQ, QRZ, RRR, 73, RR73) if they exist in calls.
For example: CQ2HV, LZ2CQ, LZ2QRZ, LZ2RRR, LZ73HV...
Added: In "Text Highlight", different color for His Call Sign.
Corrected: Showing Widgets on PCs with multiple screens.
-------------------------------------------------------------------
Mon Dec 20 09:46:45 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.62
Added: In "Decode List Filters FT", filter option
(Hide Messages From Country...).
Added: In Interface Control, RIG "JRC JST-245" support.
Added: In Language Menu, "Italian" translated by Gianni Matteini IW4ARD.
Fixed: Some problems with FLRig functions, reported by Dave KZ1O.
-------------------------------------------------------------------
Sat Nov 13 09:24:50 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.61
Corrected: Some problems with emitting "Decoded Text" via UDP with LogHX.
Added: In Level meter, indication for Low Sound Input Level.
Added: In Language Menu, "Brazilian Portuguese" translated by
Crezivando Junior PP7CJ.
Added: In Language Menu, "Norwegian" translated by Kai Gunter Brandt LA3QMA.
Added: Restriction for compound Calls to use "Skip Tx1" function.
Corrected: Wrong placement of country info in multi display setup,
reported by Marius YO2LOJ.
-------------------------------------------------------------------
Sat Oct 9 06:49:27 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.60
Changed: "Macros" and "Radio And Network Configuration" are now separate
tabs on the same window.
Added: In Language Menu, "French" translated by Paul ON6DP.
Added: In Q65 decoder, correction for linear frequency drift, (Decode menu,
"Use Drift Correction +/- 100 Hz Q65").
Added: Support for TCI protocol 1.6 (ESDR3).
Added: For modes MSK and FSK, if QRG function is ON, reset QSO at TX7.
-------------------------------------------------------------------
Wed Sep 8 21:28:49 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.59
Added: In Menu Options, Other Options, check box "Use Queue (For
Contest Activitiеs Only)".
Added: Possibility to change TX report on the fly for FT4 mode, from
Automatic Sequencing (ASeq) or if you double click on Decode List.
Added: Possibility to change TX report on the fly for FT8 mode if you
double click on Decode List.
Changed: Latency for UDP broadcast Decoded Text Messages from 1000 ms to 40 ms.
Changed: In mode MSK, if you use Automatic Sequencing (ASeq), after your
first TX with report, "report" will be locked to the end of QSO.
Added: Possibility to use TCI clients only as CAT control, and for
TX/RX sound cards or VAC cables.
-------------------------------------------------------------------
Sun Aug 15 21:23:16 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.58
Added: In Macros and Cabrillo export, support for CQ WW VHF Contest,
only for MSK144, FT8/4 and Q65 modes.
Changed: In "Interface Control", RIG TCI Client is removed, added as RIGs
TCI Client RX1 and RIG TCI Client RX2.
Optimizing: TCI protocol functionality.
Added: In Function "Overwrite Locator Database", possibility to add
CALL3.TXT file
-------------------------------------------------------------------
Fri Jul 9 22:54:37 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.57
Added: Support for TCI protocol 1.5 (ESDR3).
Added: In TCI Client Output, 2 seconds pre-buffering.
Corrected: In TCI Client Output, if TX in FT8 and TX report is changed on the
fly, ExpertSdr lost sound.
Added: In TCI Client Input, buffer for RX audio stream.
Added: In Log widget, distance column.
-------------------------------------------------------------------
Fri May 28 06:44:47 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.56
Added: In "Interface Control", as RIG TCI Client and in Sound Settings
TCI Client Output and Input.
Added: In Language Menu, "Polish" translated by Bartek SP5QWB.
Added: In "Text Highlight", different color for My Call Sign.
Corrected: Counting FT8 decoded messages.
Mode Q65 enabled
-------------------------------------------------------------------
Sat Apr 17 06:53:14 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.55
Added: In Language Menu, Spanish, Catalan, Portuguese, Romanian and Danish.
Corrected: Reading Icom radios if "Echo Back" function is ON.
Added: Immediately emitting band and frequency changes via UDP decoded
text messages.
Corrected: In Interface Control, for RIG "IC-910" function
"PTT via CAT COMMAND".
-------------------------------------------------------------------
Tue Mar 16 22:41:43 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.54
Removed: Mode Q65
Added: "Transmit level memory" per band, at the suggestion of Jerome VA3EKG.
Added: In Palette menu, MSHV Dark Style option, inportant for this reason
all langwage and Text Highlight settings will be resetted to default.
-------------------------------------------------------------------
Tue Mar 9 16:35:57 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.53
Added: Beta version of mode Q65, A/B/C/D with time periods, 15/30/60/120 s.
Important: Mode Q65 is still under development status, many changes might
be made.
Added: In Macros, new Activity Type "PRO DIGI Contest".
Added: In Language Menu, "Chinese Simplified and Traditional" translated
by SZE-TO Wing VR2UPU.
-------------------------------------------------------------------
Thu Feb 4 23:53:09 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.52
Added: Language menu in Menu bar; supported languages to the moment are
English, Bulgarian and Russian.
Added: In Interface Control, RIG "FT-DX10" and SEA-235 support.
-------------------------------------------------------------------
Wed Jan 13 08:10:02 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.51
Added: In Macros, Activity Type new "FT4 SPRINT Fast Training" contest.
Corrected: In mode MSK144, no-decode problem for messages TX2 and TX3 for
"EU VHF Contest".
Added: For mode JT65 function "Double Click On Call Sets Auto Is On" and
recognizing TX messages, suggested by Rene PA9RX.
Corrected: In Interface Control, when "Tuning Default RIG Freq Only By
Pressing Button F" option is active, problem with Random QRG
option.
Added: In "Radio And Network Configuration", a button for setting default
frequencies for contest activities if they exist.
Changed: Default program settings for FT8 and FT4 modes, to make work with
MSHV easier for new users.
Added: In Interface Control, saving Servers and Ports for each network RIGs
("Ham Radio Deluxe", "DX Lab Suite Commander" and "FLRig").
Added: In QRG function, for MSK and FSK modes, if TX with QRG, TX1,TX2...TX7
buttons are restricted.
-------------------------------------------------------------------
Thu Dec 17 08:33:55 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.50
Added: In Macros and Cabrillo export, support for most popular annual contests.
Added: In decoders FT8/4 a priori (AP) decoding for message "CQ BU" for
"Bucuresti Digital Contest".
Added: In Interface Control, "DX Lab Suite Commander" support for Windows.
Added: In Radio And Network Configuration, TCP Broadcast Logged QSO option
(DXKeeper Formatted Message).
Corrected: In psk-reporter, if the band is changed, no wrong frequency spots
emitted to psk-reporter.
Corrected: Exception, manually stop AUTO at report 73 or RR73, as a result
program TX CQ once and stops, reported by Alex LZ2FP.
-------------------------------------------------------------------
Sun Nov 29 22:37:07 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.49
Changed: The application's method of work with sound interfaces for Windows
users.
Added: Menu Options, "Auto RESET QSO at end MSK144 FT8/4" option, at the
suggestion of Jos PA3FYC.
* Re-organizing Menu Options, to be visible on small mobile devices, tablets
etcetera.
Added: Keyboard shortcuts for Band Up (Ctrl+ -) and Down (Ctrl+ =).
* Expanded multi threading decode, to 6 threads for modes FT8/4.
-------------------------------------------------------------------
Tue Nov 3 20:48:54 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.48
Changed: Log formatting and method for reading and saving, for better
performance.
Corrected: Critical error for all Windows systems (Error is in enumerating
sound cards inputs).
Corrected: Some small problems in Multi Answering Auto Seq Protocol.
Added: In in PSK reporter, procedure for reconnect if connection is lost.
-------------------------------------------------------------------
Sun Oct 18 10:55:57 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.47
Changed: Pack unpack procedures for FT8/4 modes, as in WSJT-X 2.3.0-rc1.
Added: In "Interface Control", RIG TS-590SG.
Corrected: Problem in PSK reporter, five minutes and more not sending spots.
-------------------------------------------------------------------
Sun Oct 4 22:19:58 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.46
Small changes in "Custom Palette Editor" widget.
Added: For modes MSK, "Use Two Decode Lists" option.
Second list show: TX, all "for-me" and random QSY messages.
Added: For modes FT8/4 function (QRG), if click to message as "CQ 235 LZ2HV
KN23", the application will change the TX frequency and make QSO.
Added: In Menu Options, Show/Hide Waterfall and Show/Hide TX Widget.
Corrected: In "Interface Control", CAT functions for FT-747.
Added: In "Interface Control", RIG IC-705.
Added: Propagation mode in logged QSO UDP broadcast messages.
Added: TCP Protocol connection for PSK reporter.
-------------------------------------------------------------------
Mon Aug 31 20:24:30 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.45
Added: For modes MSK, if click to message as "CQ 235 LZ2HV KN23" application
will be change the TX frequency and make QSO.
Added: For modes MSK and FSK, support for Random QRG for TX7, if CAT is active.
Added: In "Interface Control", RIG FLRig.
Added: For modes FT8/4 and JT65, waterfall check box "AF" "Auto Flatten Display".
-------------------------------------------------------------------
Wed Aug 5 07:27:13 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.44
Added: In "Decode List Filters FT8/4", more filter options (Show Only Messages...).
Added: Fast Access to "Decode List Filters FT8/4", double click to List Header
will be show filters dialog.
Corrected: Function Three-stage Decoding FT8, doe not decode many times if
fast double click on call.
-------------------------------------------------------------------
Tue Jul 14 19:53:14 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.43
Added: In menu Options, Decode List Options for modes FT8/4, dialog widget
"Decode List Filters FT8/4".
Corrected: In Decode List 2 for modes FT8/4, problem with correct position
of TX message, reported by Carl WC4H.
Added: In Waterfall area for modes (MSK, FSK, ISCAT and JT6M) Label for time
period formatted as hh:mm:ss.
Added: In "Astronomical data" widget generating and updating "azel.dat" file,
this file is located in directory "settings". If "Astronomical data"
widget is active "settings/azel.dat" file will be updated every
2 seconds.
-------------------------------------------------------------------
Thu Jun 25 12:19:48 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.42
Added: For ARRL Field Day contest new PE section, as in WSJT-X 2.2.2.
Optimization FT8 decoder levels (Fast, Normal and Deep) for slow speed PCs.
-------------------------------------------------------------------
Sun Jun 14 19:01:50 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.41
Added: In log widget, in option "Add ADIF To Log", function for recognizing
start/end time seconds for MSHV Log.
Optimization FT8 decoder source code for option "Use Three-stage Decoding FT8".
Added: In menu Option, "Use Default DF Tolerance 1500 Hz FT8/4".
Changed: In modes FT8/4, logic for changing RX frequency and bandwidth bounds
start and end.
-------------------------------------------------------------------
Tue Jun 2 22:54:59 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.40
Corrected: Many problems in option "Use Three-stage Decoding FT8"
-------------------------------------------------------------------
Tue May 26 19:08:35 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.39
Added: In Menu Decode, plug-in option "Use Three-stage Decoding FT8"
(beta version), as in WSJT-X 2.2.0 rc2.
Added: New message format for EU VHF Contest, This change is not backward
compatible with earlier versions of MSHV and WSJT-X.
Added: In "Interface Control", RIG TS-890S.
Corrected: TX Sounds error in Windows.
Added: In "Multi Answering Auto Seq Protocol", zero calls count in List
Queued.
-------------------------------------------------------------------
Tue Apr 21 20:35:53 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.38
Added: In Sound Settings, pulseaudio support for Linux (beta version).
Added: In Interface Control, "Virtual tty0tty serial device" support
for Linux, thank for help, Igor R0JF ex. RA0JF.
Added: In Options menu, Log Options, checkbox "Turn Auto Comments Off".
Added: RIG protection, e.g. (if you TXing and directly close software).
-------------------------------------------------------------------
Mon Mar 30 08:21:16 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.37
Corrected: In modes FT8/4, Multi Thread Decode crashes in Windows 10 and Linux.
Corrected: For Linux no-decode error if use QT > QT5 v.5.9.x, thank for help,
Richard G8JVM and all Linux testers.
Added: In Menu Decode for mode FT4, Multi Threads Decoding option.
-------------------------------------------------------------------
Wed Mar 11 23:17:31 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.36
Corrected: Critical error in MSHV v.2.35 for Windows 10.
Important: In this version major changes have been made in decoders of MSHV.
Added: In Menu Decode for mode FT8, Multi Threads Decoding option. The
maximum possible decode threads is four.
Important: if you have a maximum of four threads on your PC, do not use
all possible threads for RXing if you need to TX.
Added: In mode FT8, changing TX report "on the go", if RX period is
longer than usual.
Corrected: Some errors in subtraction and a priori decoding for modes FT8
and FT4.
Corrected: Procedures for saving Settings and Log, to protect software from
deleting settings and log, if crashes occur.
-------------------------------------------------------------------
Thu Feb 20 16:37:48 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.34
Added: Restriction for TXing on multi slots in the standard FT8 and FT4
HF sub-bands.
Removed: In "Free CQ" option, the restriction for valid call sign; Option
renamed
Changed: Label QRG for modes FT8/4 MSK144 if the label contains only digits.
Small correction in FT8 decoder for better performance.
Corrected: For all modes, sound input filter for better performance.
-------------------------------------------------------------------
Mon Feb 3 22:48:20 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.33
Changed: All web-based application resources are moved to the
"settings/resources" folder.
Changed: In "Multi Answering Auto Seq Protocol", logic for max time contact
waiting (remove Call in the end of RX period).
Added: "QSO backup database" in modes FT8/4 MSK144, for correction
(Grid, TXRpt and RXRpt) and in other modes (only Grid), if they are missing.
Changed: Label QRG will contain only digits.
Corrected: For modes FT8/4 MSK144, TX/RX label QRG formatted as e.g.
(from CQ 32 LZ2HV KN23 to CQ 032 LZ2HV KN23).
-------------------------------------------------------------------
Wed Jan 8 16:08:28 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.32
Added: Support for some non-standard call-signs for modes MSK144, FT8/4.
For the moment this function is possible only for the latest versions of
MSHV 2.32 and JTDX 2.1.0-rc146.
-------------------------------------------------------------------
Thu Dec 19 21:57:10 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.31
Corrected: QSO protocol logic so as correspond to WSJT-X v2.1.2
In Options menu, added check box "TX Confirmation If 73 Or RR73
FT8/4" (this is the old protocol for QSO).
Corrected: Decode list view for modes JTMS and JT6M.
Added: Support for VLF bands (2200M, 630M).
-------------------------------------------------------------------
Fri Dec 6 21:27:19 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.30
Corrected: Slow refresh speed in lists (Log, Decode and Beacon widgets
for functions Add, Edit, Delete and Scroll), following the
conversion to QT5.
Added: In "Interface Control" for Windows users, RIG "Ham Radio Deluxe"
(TCP Network connection, beta version).
Small corrections in Options and Band menus.
-------------------------------------------------------------------
Tue Nov 19 19:22:49 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.29
Corrected: Pack unpack 77-bit messages for non-standard calls.
Added: For modes MSK, JT65 and FT8/4 in "Decode List", column Message
shows the number of decodes for the last decoded period.
Added: Saving "Help, Astro Widgets" position on Desktop.
Important only at first start (v2.28 to v2.29) Log Widget position will be reset.
Corrected: At start same read settings errors e.g.("Skip Tx1 ..." function).
Corrected: No-decode in JT65C decoder.
-------------------------------------------------------------------
Mon Oct 28 09:17:18 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.28
Added: Saving "Log Widget" position on Desktop.
Added: In "Interface Control", RIG FT-DX1200.
Corrected: Some visual defects, following the conversion to QT5.
Corrected: Slow-speed decoding on Windows 32-bit, following the
conversion to GCC7 compiler.
Optimisation source code MSK144 decoder for more performance.
-------------------------------------------------------------------
Fri Oct 4 09:10:27 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- package renamed to mshv
- update to version 2.27
Added: In Options menu "Single Click On Call Shows Country Info".
The function requires a "cty.dat" file installed in "/settings/database"
Corrected: JT65 mode for small DF tolerances e.g.(10Hz,20Hz).
version 2.26
* Application visual interface (GUI) is changed to QT5, support of
QT4 is removed from source code.
* The recommended QT and GCC versions for compiling are QT5 v.5.6.3,
and GCC v.7.3.0
Corrected: "Use Selected Constant TX Audio Frequency FT8/4" function
for old Yaesu RIGs eg.(CAT precision 10Hz,1.25Hz,0.625Hz).
-------------------------------------------------------------------
Sun Aug 18 20:12:00 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.25
Corrected: Cabrillo formatting for "WW Digi DX Contest".
-------------------------------------------------------------------
Thu Aug 1 19:27:36 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.24
Added: In waterfall for FT8/4, bandwidth correction through mouse dragging.
Added: In Log widget, add manually, edit, import, export (ADIF, Cabrillo)
QSOs for non-digital modes, as SSB CW FM.
Added: In Export ADIF and network UDP broadcast ADIF support for Multi-Two
Transmitters with ID: (<APP_N1MM_RUN1RUN2:1>0/1/2).
Added: In Macros widget, "Multi-Two Transmitter:" option, for the contests
which support Multi-Two category.
Added: In export to Cabrillo widget, "Multi-Two Transmitter:" option, for
the contests which support Multi-Two category.
-------------------------------------------------------------------
Sat Jul 20 12:55:30 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.23
Removed: Support for the old rules of "WW Digi DX Contest".
Added: In Log widget Menu functions, "Create New Log And Back Up Old"
and "Create Log Backup".
Added: In export to cabrillo widget, "Do not filter QSOs by Contest ID
(It is not recommended)" option.
Small corrections in decoders FT4 and FT8.
-------------------------------------------------------------------
Thu Jul 4 11:24:21 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.22
Added: In "Multi Answering Auto Sequence Protocol FT8/4", multi slot support
for the rules of "WW Digi DX Contest".
Added: In Options menu, "Macros", new contest "WW Digi DX Contest", and Export
to cabrillo function for this contest.
Added: In Options menu, check "Log Automatically QSO MSK FT8/4" box.
Added: In "Radio And Network Configuration", check "Enable Decoded Text" box.
-------------------------------------------------------------------
Fri Jun 21 11:11:55 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.21
Added: ADIF format support, as in specification of ver.3.1.0.
Corrections in "Use Selected Constant TX Audio Frequency FT8" function.
Corrected: Hashing non-standard calls.
-------------------------------------------------------------------
Wed Jun 5 18:41:02 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.20
Changed: FT4 protocol, as in WSJT-X v.2.1.0 rc7.
Corrected: "Use Selected Constant TX Audio Frequency FT8" function
for FT-857.
Corrected: UDP identification info at startup for new N1MM Logger+.
Corrected: Spotting non-standard calls to DX clasters.
Added: In "Interface Control" RIG: FT-DX101.
-------------------------------------------------------------------
Mon May 13 23:00:50 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.19
Changed: In FT8 mode, type modulation changed to GFSK, for cleaner
TX output, as in WSJT-X v.2.1.0.
Added: In "Interface Control", checkbox "Tuning Default RIG Freq From Mode".
FT4 decoder optimization.
Added: FT4 mode in cabrillo format exporting.
-------------------------------------------------------------------
Wed May 8 15:42:14 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.18
Added: Beta version of FT4 mode.
Added: In "Interface Control" RIG: IC-9700.
-------------------------------------------------------------------
Thu Apr 25 08:36:14 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.17
Corrected: logic in "Selected Constant TX Audio Frequency FT8",
for using with PTT via RTS or DTR.
-------------------------------------------------------------------
Fri Apr 19 09:44:47 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.16
Added: In "Interface Control", "Selected Constant TX Audio
Frequency FT8".
Corrected: In mode MSK144 +Sh, not possible to emit RR73.
Corrected: PI4 decoder synchronization from -3s to +3s.
-------------------------------------------------------------------
Wed Mar 20 16:56:10 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.15
Some corrections for the forthcoming ARRL Field Day.
Corrected: If software is switched to some contest mode, "Multi
Answering Auto Seq Protocol" is blocked.
Corrected: Logic of software, two non-standard calls cannot make
QSO in FT8 and MSK144.
Corrected: Some issues with visual interface when font or screen
resolution is changed.
-------------------------------------------------------------------
Fri Mar 8 20:27:28 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.14
Corrected: Critical error in v2.13, RXing Fox message
-------------------------------------------------------------------
Thu Mar 7 08:46:24 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.13
Added: In "Multi Answering Auto Seq Protocol", "CQ on free slot"
for TXing CQ if there is a free slot.
Added: In "Multi Answering Auto Seq Protocol", in the Settings tab,
check box "Auto Sort" for auto sorting of Queued if Dist column
header is marked.
Added: Shortcut for "Multi Answering Auto Seq Protocol"
German Keyboard "Ctrl+^" and for US "Ctrl+`".
Corrected: Do not draw "Text Highlight", if it is out of message
column bands.
Corrected: Logic for TX1, as in WSJT-X v2.0.1.
Corrected: Using non-standard calls with valid call and QRA locator
in Standard, Multi Answering and NA VHF Contest protocols.
-------------------------------------------------------------------
Thu Feb 21 15:08:25 UTC 2019 - dl8fcl@darc.de
- update to version 2.12
Many source code errors fixed that would cause the program to crash.
Added: In "Interface Control" RIGs: Smart SDR and Power SDR.
-------------------------------------------------------------------
Mon Feb 4 21:04:37 UTC 2019 - dl8fcl@darc.de
- update to version 2.11
Corrected: In "Astronomical Data" Widget, Moon direction error at startup.
-------------------------------------------------------------------
Thu Jan 24 09:14:49 UTC 2019 - dl8fcl@darc.de
- update to version 2.10
Added: In "Radio And Network Configuration" Button for resetting to
default all frequencies in above table.
Added: In "Interface Control" RIG: FT-DX3000
Some cosmetic changes in visual interface, if the font is changed.
Added: In decode Lists, if font is changed, all columns will be
auto resized.
Added: In "Multi Answering Auto Seq Protocol FT8" check-box "SM",
allows TXing special message e.g.(OZ2M RR73; R5WM <LZ2HV> +05),
by default unchecked.
-------------------------------------------------------------------
Mon Jan 14 09:13:03 UTC 2019 - dl8fcl@darc.de
- update to version 2.09
Global changes: Fourier transformation for all decoders, for faster decoding.
Added: In Log Widget, a progress bar for Add and Export QSOs status.
Corrected : Adif adding to log for WSJT-X and HRD Logbook,
reported from SV9FBM Stelios.
-------------------------------------------------------------------
Sun Jan 6 11:55:40 UTC 2019 - dl8fcl@darc.de
- update to version 2.08
Added: For slow-speed PCs, auto correction function, controls the
TXing starting time in FT8 mode (500 ms).
Added: Saving Rx and Tx frequency in FT8 Mode.
Corrected: On decode list, DT column exception e.g.(-0.0 to 0.0) in FT8 mode.
-------------------------------------------------------------------
Thu Dec 27 10:59:07 UTC 2018 - dl8fcl@darc.de
- update to version 2.07
Corrected: In Modes FT8 and MSK144, recognition non-stanard calls in
message if they not exist, exception as e.g.
(<...> LZ2HV +05 or LZ2HV <...> +05).
Tuning subtraction in FT8 v2 decoder in Normal Deep decode levels.
Added: In Options Menu one good idea from JTDX, but with small
logical changes, "New decode period to clear Message List FT8".
Added: In Keyboard Shortcuts Ctrl Click: On waterfall adjust RX and
TX frequencies together and Shift Click: On waterfall adjust
TX frequency (if LTR checkbox is not checked).
-------------------------------------------------------------------
Wed Dec 19 16:58:44 UTC 2018 - dl8fcl@darc.de
- update to version 2.06
Corrected: Fatal error in sensitivity in MSK144 v2 decoder, thanks
to Rx Waves and tests on SP6CPH Zbyszek and G0GGG Neil.
Added: In "Text Highlight" in Options, buttons for changing text
highlighting colors.
Added: In "Text Highlight" in Options, checkboxes for changing
highlighting criteria (By Band, Mode...). If you change
this checkboxes for QSO before, in Options menu, "Warn
Me If QSO Before" criterion will be changed too.
Added: In "Radio And Network Configuration" UDP Broadcast Logged QSO,
contest exchanges as last column, the same as WSJT-X v2 final.
Corrected: Recognizing non-standard calls, eg.(C18XMAS...) and their TXing.
-------------------------------------------------------------------
Mon Dec 17 17:33:21 UTC 2018 - dl8fcl@darc.de
- build with QT4. QT5 has display problems
-------------------------------------------------------------------
Tue Dec 11 11:50:16 UTC 2018 - dl8fcl@darc.de
- update to version 2.05
Added: In "Text Highlight" in Options, "His call in the message if
the Log contains worked-before status MSK FT8 JT65" checkbox.
Added: In "Text Highlight" in Options, "RR73 in message" checkbox.
Added: New "Keyboard Shortcuts", "Ctrl+<" DF Tol Down and "Ctrl+>"
DF Tol Up (FT8,JT65,PI4 Bandwidth).
Added: In Log widget, "Export in Cabrillo", contest identification
field and its correction, if needed.
Optimization application starting for slow speed PCs.
-------------------------------------------------------------------
Mon Dec 3 20:59:34 UTC 2018 - dl8fcl@darc.de
- update to version 2.04
Added: In Log Menu, "Add ADIF To Log" function adding only QSOs
for existing in application modes eg.(MSK,FSK...). This
function helps to add contacts from other softwares, or
"ADIF" exported logs by the MSHV.
Added: In "All Text Monthly (history files)" TX and RX frequencies.
Corrected: In MSK and FT8 v2 64-bit application, unpack error if
used non-standard calls.
-------------------------------------------------------------------
Sat Nov 17 17:15:20 UTC 2018 - dl8fcl@darc.de
- update to version 2.03
Corrected: New formatting TX1 if non-standard calls are used as
WSJT-X v2 rc4.
Corrected: Small problem with the MSK144 generator.
-------------------------------------------------------------------
Tue Oct 30 21:18:47 UTC 2018 - dl8fcl@darc.de
- update to version 2.02
Corrected: New formatting TX1 if non-standard calls are used.
Corrected: Second decode list for v2. protocol, if calls have "< >".
Corrected: Some problems in serial numbers determination on
"ARRL RTTY Roundup" contest.
Added: In "ARRL RTTY Roundup" contest logic for using "TU;" in reports.
Corrected: In MSK144 logic for +Sh reports if used non-standard calls.
Changed: MSK144 +Sh (MSK40) call hashing sum length from 22 to 37,
as in WSJT-X v2.0 rc3.
Corrected: Default report macros in TX4 using (RR73) for all contests.
Changed: If using software with Auto Seq (ASeq), in contests all
completed QSOs will be saved automatically in Log.
Enabled: Option "Double Click On Call Sets Auto Is On", for MSK modes.
-------------------------------------------------------------------
Thu Oct 25 20:06:46 UTC 2018 - dl8fcl@darc.de
- update to version 2.01
Added: Support for 77-bit protocol for "NA VHF Contest, EU VHF
Contest, ARRL Field Day and ARRL RTTY Roundup" contests. In
Macros widget, added options for switching between standard and
contest work mode.
New Function: In Log widget, "Export in Cabrillo".
-------------------------------------------------------------------
Thu Oct 11 19:12:06 UTC 2018 - dl8fcl@darc.de
- This is a beta version of MSHV supporting the new protocol for
FT8 and MSK144, transmitting and receiving 77-bit messages. This
protocol will be more flexible when using non-standard calls and
many other new extras.
Important: MSHV2 is transmitting for the modes FT8 and MSK144 in the
new 77-bit protokol. In mode FT8, MSHV receives old and new type
messages, in mode MSK144 only in the new 77-bit messages.
In "Multi Answering Auto Seq Protocol", MSHV transmits the new
77-bit messages
