File wsjtx.changes of Package wsjtx
-------------------------------------------------------------------
Sat Oct 11 09:17:38 UTC 2025 - Walter Fey <dl8fcl@darc.de>
- update to version 3.0.0-rc1
* Single-click Band Buttons can be enabled from the View menu.
* Filters can be used to suppress the display of various categories
of decoded messages.
* Options to Wait and Reply, Wait and Call, and Wait and Pounce can
help you make QSOs under difficult propagation conditions while
minimizing transmitted QRM. These features, Filters, and
Auto-Sequencing are now available for all WSJT-X modes.
* Optional Audible Alerts can play a sound alerting you to reception
of a message with speficied content.
* Full Duplex Mode allows WSJT-X to transmit and receive at the same
time.
* Transceiver Control Interface (TCI) is supported for rig control
and audio input/output.
* SuperHound operators can activate Wait and Call for a SuperFox
callsign, even if SuperFox has not yet been decoded. Fox operators
receive a warning message if another Fox appears to be on the same
frequency.
* Transmitted Power and SWR can be displayed (as reported by the
radio) in a Status Bar label. Transmission can be stopped
automatically if SWR exceeds 2.5. These features work with most
modern radios controlled via Hamlib or FLRig.
* Band Hopping checkboxes for FT8, FT4 and MSK144 can activate
sequential reception intervals on the main sub-bands, or on up to
eight specified dial frequencies.
* Saved Audio Files can be scheduled for automatic deletion after 30
days.
* CALL3.TXT files for either terrestrial or EME use can be downloaded
by clicking a button on the File | Settings | Colors tab.
* Logging now supports field type for satellite QSOs, and the "Log
Automatically" option is available when not in contest mode. New
checkboxes on the File | Settings | Reporting tab provide support
for certain contests.
* The OpenSSL library is now installed automatically with WSJT-X.
* High Resolution Monitors are supported with better scaling of fonts
and widget sizes.
* New EME Features include easier ways to select dial frequencies
within an EME sub-band and to offset your Tx frequency by an
integer number of MHz from the Rx frequency. New buttons are
provided for quick access to Echo mode and six popular Q65
sub-modes.
* QMAP version 0.5 and MAP65 version 3.1 offer CQLive spotting and
some other improvements.
* FT8 Decoding includes an option for parallel processing in
concurrent threads, and other changes to yield improved
performance.
* Echo mode allows you to transmit your callsign (or any other
6-character group) to the Moon and decode its echo.
* Quick Filter categories can highlight decoded transmissions
from specified territories.
* Right-click on the Band Hopping button to move you to the next
specified band hopping frequency.
* MSK144 operation: "73" messages addressed to MyCall are now also
displayed in the right pane. A bank line is inserted between
decodes for different TR periods.
* Q65 operation at VHF: A new option on the Decode menu disables
mouse clicks on the waterfall unless ALT key is held down.
* "Highlight orange" and "Highlight blue" features on the File |
Settings | Colors tab can now be used to highlight directional
calls (DX, SOTA, POTA, YOTA, etc.).
* QMAP and MAP65: Improved handling of long compound messages in Q65
mode. Corrected a bug that could cause a crash when receiving a CQ
message not containing a grid.
* A variety of other minor improvements and bug fixes.
-------------------------------------------------------------------
Tue Jul 29 08:07:51 UTC 2025 - Walter Fey <dl8fcl@darc.de>
- change deprecated-declarations warnings to be no-error
necessary for hamlib 4.7.
-------------------------------------------------------------------
Tue Feb 18 08:18:18 UTC 2025 - Walter Fey <dl8fcl@darc.de>
- update to version 2.7.0
* QMAP is of particular interest to those engaged in Earth-Moon-Earth
(EME) communication. It provides single-polarization receive-only
capabilities for any one of the 60-second submodes of Q65 and the
associated 30-second submode with the same tone spacing. It lets
you monitor all corresponding traffic in a 90 kHz sub-band while
conducting EME QSOs in the usual way with WSJT-X.
* Q65 Pileup mode helps DX operators using Q65 in circumstances with
many simultaneous callers and very weak signals, such as those
experienced by 6-meter EME DXpeditions.
* SuperFox mode behaves operationally like the old-style Fox and Hounds
mode but uses a new constant envelope waveform for Fox’s transmissions.
Messages can be transmitted simultaneously to as many as 9 Hounds with
no signal-strength penalty, resulting in a system gain of about +10 dB
compared to the older Fox-and-Hound operation using 5 slots.
* The new Message System allows structured plain text messages to be
sent to your QSO partner to request QSY to another band or mode, or
to send any one of a number of canned messages. This feature can be
especially useful during contests.
* A button labeled "Update Hamlib" lets you download and install the
latest version of the rig-control features in Hamlib.
* The cty.dat file can now be updated by clicking a single button.
-------------------------------------------------------------------
Mon Jan 6 18:56:45 UTC 2025 - Walter Fey <dl8fcl@darc.de>
- update to version 2.7.0-rc8
* The WSJT-X Message System can be used to invite your QSO partner to
QSY to another frequency or mode (e.g. during contests), or to
send some general short messages. It consists of the Message
Creator and the QSY Monitor. Received messages are displayed as
popups.
* Bug fixes and improvements to SuperFox/Hound mode:
- The user interface now prevents users from setting parameters
that could lead to a subprocess error in the SuperFox decoder.
- The SuperFox password server is no longer called if the received
OTP (one-time password) is 000000.
- Protection against several rare but possible bounds errors.
- Fixed an inconsistency with the Tx even/1st checkbox when
switching from SuperHound mode to any other mode.
- For SuperFox, it is now ensured that the transceiver Tx dial
frequency is tracked properly with internal program variables.
* Avoided a potential program crash when Astronomical data window
is not open.
* More intuitive navigation when WSJT-X is used together with QMAP.
A single click in Active Stations window now selects a station to be
called; a double-click also activates Enable Tx.
* Corrected audio issues with some macOS versions.
-------------------------------------------------------------------
Sat Sep 28 06:46:22 UTC 2024 - Walter Fey <dl8fcl@darc.de>
- update to version 2.7.0-rc7
- Enhancements to the SuperFox decoder:
* Performance of the SuperFox decoder has been further improved.
* You can now set individual FTol values and tune the decoder to
the exact sync frequency of the SuperFox signal if it is not exactly
750 Hz. Both result in a better decodability in certain situations.
* Important: The Rx frequency must be set close to the sync frequency
+/- FTol, for example 750 +/- 50 Hz.
- Introduction of a new Fox verification system:
* The new Fox verification system uses one time passwords (OTPs), and
works for the SuperFox mode as well as for old-style Fox and Hound
operation. It can be enabled by the new OTP checkbox on the Advanced
tab of the Settings dialog.
* Fox or SuperFox stations send individual OTPs via radio. Hounds
automatically check the validity of the received OTPs in real time
from a server when there is an internet connection. Otherwise, the
validity can also be queried manually later. OTP verifications can
only be retrieved once the transmission has already taken place.
* You may optionally display the received OTP values by checking
the box "Show OTP messages".
* If the Fox or SuperFox callsign is verified by receipt of the
correct OTP, the background color of the Hound or Super Hound label
switches to green.
* Theoretically, DXpeditions can set up their own OTP server, however,
we recommend using the server at https://www.9dx.cc.
* Use of the new Fox verification system requires an OTP key. The
system uses open source code and standard encryption
technology. For testing purposes, non-verified SuperFox
transmissions are now possible without a key.
- Improvements to SuperFox/Hound operation:
* SuperHounds must now first decode the SuperFox before they can
call, and a QSO must be started by double-clicking on a SuperFox
decode. (Note that calling the Fox blindly not only leads to
unnecessary band utilization, but can also significantly reduce the
QSO rate due to unanswered (Super)Fox replies.)
* Switching to SuperHound mode automatically sets the Rx frequency to
750 Hz. The previously selected frequency is saved and restored
afterwards.
* Right-clicking on the H button now activates/deactivates SuperFox mode.
* A flaw resulting in sub-optimal SuperFox QSO rates has been
corrected.
* SuperFox decoder now does a more thorough job of rejecting QRM from
non-SuperFox signals.
* Fields in the SuperFox payload not otherwise used in a particular
transmission are now set to known nonzero values. Do NOT use RC6 or
earlier versions to decode SuperFox transmissions from RC7 or
later.
* Old-style Fox stations can now transmit free text messages (up to
13 characters) by using an available stream.
* Some enhancements useful for Fox operators: Active Station Window now
shows band activity. Hound callsigns can be highlighted via UDP API, and
assigned a score for sorting via UDP API. Fox Tx frequency is preserved
when switching in/out of Fox mode.
* UDP Status Update messages now include information on how many callsigns
have highlighting applied, and how many callsigns have a score assigned.
- Other enhancements and fixes:
* In FT8 mode, the Settings dialog no longer resets the VFO frequency
to band/mode default unless really needed.
* Several code improvements specifically for macOS.
* Updated CTY.DAT and Hamlib.
-------------------------------------------------------------------
Sat Jul 20 07:52:09 UTC 2024 - Walter Fey <dl8fcl@darc.de>
- update to version 2.7.0-rc6
* Strong signals from Superfox too frequently failed to decode.
* SuperFox sometimes sent incorrect signal reports and an invalid
digital signature.
* A Fortran bounds error could sometimes occur in the SuperFox
decoder.
*For SuperFox operator, the "age" displayed for Hound callers
became garbled after the 0000 UTC date change.
* Decodes of SuperFox transmissions were not posted to PSK Reporter.
* Some SuperFox-related messages were posted incorrectly to ALL.TXT.
* Logic for turning the SuperHound label green was flawed in some
circumstances.
-------------------------------------------------------------------
Wed Jul 3 06:40:06 UTC 2024 - Walter Fey <dl8fcl@darc.de>
- update to version 2.7.0-rc5
* Corrected a flaw that caused "Log automatically" to not work for
the ARRL Digi Contest.
* Control elements for special operating activities are now disabled
(grayed out) if the respective function is not applicable.
* Corrected a longstanding flaw that caused "Start new period
decodes at top" to stop working properly after some time.
* Right-click mouse press events are now less error-prone.
* Improved the readability of the first line when "Start new period
decodes at top" is checked.
* 4-digit grids are now logged for certain contest modes to ensure that
the log complies with contest rules.
* The Fox Tx frequency is now saved and restored separately.
- SuperFox mode
* The SuperFox mode behaves operationally like the present Fox and
Hounds mode
* IMPORTANT: Older revisions of WSJT-X and derivative programs will
not be able to decode SuperFox transmissions. Hounds must use
WSJT-X 2.7.0-rc5 (or a later release, when available) to receive
SuperFox messages.
* Check
https://wsjt.sourceforge.io/wsjtx-doc/Release_Notes_2.7.0-rc5.txt
-------------------------------------------------------------------
Wed Mar 13 08:15:36 UTC 2024 - Walter Fey <dl8fcl@darc.de>
- update to version 2.7.0-rc4
- QMAP enhancements -- of particular interest to EME operators:
* QMAP now decodes Q65 submodes with both 60-second and 30-second T/R
sequence lengths. Clicking on a resulting line in the WSJT-X Active
Stations window automatically sets dial frequency and working
submode as needed to call that station.
* QMAP operates in 60-second receive sequences, and its Q65 decoder
starts at t=19.5, 30.0, 49.5, and 58.5 s into the sequence. Most
decoded messages are displayed well before the end of the relevant
time slot.
* A new, more compact file format is now used for wideband data
files. A "Save decoded" option has been added to the Save menu.
* An option has been added to allow exporting a 3 kHz portion of a
wideband data file as a standard WSJT-X *.wav file.
* CTRL+click on QMAP's upper waterfall sends an integer kHz dial
frequency request to WSJT-X.
* With focus on the WSJT-X main window, hit Alt+A on the keyboard to
clear the Active Stations window.
* Many minor enhancements to the User Interface.
- WSJT-X:
* Enable decoding of MSK144 from the jt9[.exe] executable.
* Several changes to reduce problems experienced when (contrary to
our recommendations) messages with short (10-bit) callsign hashes
are used in standard FT4/FT8 sub-bands.
-------------------------------------------------------------------
Tue Jan 2 09:36:03 UTC 2024 - Walter Fey <dl8fcl@darc.de>
- update to version 2.7.0-rc3
* Added a new "Update Hamlib" function. On Windows, it allows the user to
update Hamlib directly from the program. The previously used version is
backed up, so the user can easily revert a hamlib update.
* The Hamlib version in use is now displayed (also on Linux and macOS).
* The FT Roundup Messages protocol has been enhanced. It now allows also
the exchange of static 4-digit numbers instead of serial numbers. This
extends the usability of the FT RU protocol for other contest types.
* Improved direct switching between modes. Submode, as well as the status
of the "Sh" and "Fast" checkboxes are now saved and restored by mode.
* Some right-click events were made more intuitive and consistent.
. Right-clicking the Q65 button enables Q65 Pileup mode, a left-click
brings you back to the normal Q65 mode.
. Right-click the JT65 button to switch to JT9 mode.
* For Q65, all messages for us are now displayed in the right window.
* Message averaging is now allowed only when VHF features are
enabled, and label texts are changed to "Single Period Decodes" and
"Average Decodes" only if averaging is enabled.
* Some improvements to the Hamlib Transceiver code. Behavior is now
more stable when Rig Split has been selected.
* Prevented redundant network communication between WSJT-X and DX Lab
Suite Commander.
* Download of the LotW file now works without OpenSSL libraries.
* Made the spot counter work for WSPR.
* Prevented insertion of an individual contest name when in Fox mode.
* WAE entities are now assigned to the correct DXCC when "Include
extra WAE entities" is not selected.
* Added a utility program 'cablog' which can be used to convert the
wsjtx.log file to Cabrillo format for the ARRL EME contest.
* Minor improvements to the Active Stations window.
* The Rx/Tx frequency for Echo mode has been fixed at 1500 Hz.
* Some corrections and updates to the INSTALL instructions for Linux.
* Updated CTY.DAT file.
-------------------------------------------------------------------
Fri Jul 7 21:15:46 UTC 2023 - Walter Fey <dl8fcl@darc.de>
- update to version 2.7.0-rc2
* CTRL+SHIFT+F11/F12 now changes dial frequency by 1000 Hz instead of
2000 Hz.
* Improved spotting to PSK Reporter for upcoming HamSCI Festivals of
Eclipse Ionospheric Science.
* Added optional Hungarian translation of the user interface.
* Fixed a flaw that could produce false decodes in Q65 submodes D and E.
* Fixed a flaw with the QSO start time. It is now reset when the DX
Call changes.
* Fixed a flaw that prevented contest logging of the ARRL Digi Contest.
* Right-clicking the Q65 mode button to toggle the Q65 Pileup mode on/off
now also works on macOS.
* Fixed a compilation error on macOS Ventura.
* WSPR and FST4W band hopping now works again.
* It is now ensured that "U.S.A." is displayed when using certain
cty.dat files.
* Corrected the problem with duplicated FT8 entries in ActiveStations
window.
-------------------------------------------------------------------
Tue May 23 07:56:42 UTC 2023 - Walter Fey <dl8fcl@darc.de>
- update to version 2.7.0-rc1
* QMAP and Q65 Pileup mode are of particular interest to those
engaged in Earth-Moon-Earth (EME) communication, but other
applications may be found for them as well.
* QMAP is derived from MAP65, an older program used since 2007 for
EME, mainly on the 2 m band. QMAP provides single-polarization
receive-only capabilities for any one of the 60-second submodes
of Q65. It allows you to monitor all traffic in a 90 kHz subband
while conducting EME QSOs in the usual way with WSJT-X.
* Q65 Pileup mode is a new feature in WSJT-X that will assist DX
operators using Q65 in pileup circumstances with many
simultaneous callers and very weak signals, such as those
experienced by 6-meter EME DXpeditions.
* Further details on QMAP and Q65 Pileup mode are available in a
Quick-Start guide posted here:
https://wsjt.sourceforge.io/Quick_Start_WSJT-X_2.7_QMAP.pdf
* WSJT-X now provides more efficient spotting to PSK Reporter.
Redundant spots are omitted, and posting of spots is now spread
more widely in time. (Temporarily, in support of the HamSCI
Festivals of Eclipse Ionospheric Science, spots will be transmitted
more frequently during the upcoming solar eclipses.)
* WSJT-X is now able to process more than 100 FT8 decodes in a single
reception interval.
* Improvements to the Fox mode:
* More convenient and efficient handling of the two queues.
* Fox Log window now displays statistical data on the QSO rate.
* When the station locator is changed (e.g during portable
operations), the new locator will be sent automatically to PSK
Reporter.
* The cty.dat file can now be updated by clicking a button on the
Settings -> Colors tab.
* A new status display appears when fetching a new LotW file.
* Multi-streamed messages transmitted by MSHV are now handled
properly when WSJT-X is in Hound mode.
* Auto-sequencing now has better protection against unwanted effects
caused by late FT8 decodes.
* Fixed an inconsistency in which Contest Name was not correctly
remembered.
* Other minor bug fixes.
* Updated hyperlinks to our homepage and to our new WSJT GROUP User
Forum (https://groups.io/g/wsjtgroup/) can now also be found in the
User Guide.
* The build instructions for macOS have been clarified.
-------------------------------------------------------------------
Mon Jan 16 21:23:30 UTC 2023 - Walter Fey <dl8fcl@darc.de>
- update to version 2.6.1
* Fix a flaw in Q65 mode that prevented proper display of the T/R
period spinner.
* Make the initialization of the decoded text font more robust.
* Better initialization when starting the program in FT8 Hound mode.
* Fix a bug causing program crash with more than 100 decodes in a
single FT8 sequence.
* Fix a compiler warning on macOS.
* Correct the reference to "ARRL International Digital Contest" in the
Release Notes.
-------------------------------------------------------------------
Sat Jan 7 08:28:33 UTC 2023 - Walter Fey <dl8fcl@darc.de>
- update to version 2.6.0
* Mode selection buttons on main window for FT4, FT8, JT65, MSK144,
Q65, and FT8's Hound mode
* Support for the ARRL International DX Contest
* Performance enhancements for the FT8 and Q65 modes
* New features for EME Echo mode, including calibrated SNR reports
* Several new convenience features for Fox operators
* Save/Restore capability, "Preferred" status, and effective date
ranges for mode-dependent tables of default frequencies
* Improved display features for contest log
* Improved calibration of SNR estimates for modes FST4 and FST4W
-------------------------------------------------------------------
Mon Jan 3 23:47:41 UTC 2022 - Walter Fey <dl8fcl@darc.de>
- update to version 2.5.4
* Repair a defect that caused occasional crashes when in QSO with
stations using nonstandard callsigns.
-------------------------------------------------------------------
Tue Dec 14 09:08:48 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.5.3
* Add a note in memory of G4WJS to the About window
* Add a simple $DXCALL macro capability for Tx messages, and update
the User Guide accordingly
* Ensure that MAIN VFO is used for receiving on rigs that require it
* Repair a defect in reporting low-confidence decodes to PskReporter
* Updated CTY.DAT database, tnx to Jim AD1C
-------------------------------------------------------------------
Fri Nov 5 10:07:06 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.5.2
* Repair a longstanding regression that caused si
tail-ended Tx2 messages to be omitted from logged information
* Parse "dx-call-1 RR73; dx-call-2 <de-call> +nn" messages (i3=0,
n3=1 DXpedition mode) in regular 77-bit modes
* Repair a regression associated with setting the main window width
on program startup.
* Repair a problem with Q65 decodes of type 'q3' for messages of the
form "<Call_1> Call_2"
* Execute code associated with Q65 decodes of type 'q5' only when the
Max Drift control is set to 50. This fix prevents
double-incrementing of the message averaging counter on the first
decoding sequence.
* Polarization offset 'Dpol' from the astronomical data window is now
written to file azel.dat if environment variable
WSJT_AZEL_EXTRA_LINES has been defined as 1 or greater. Dpol is
especially useful for EME on the higher microwave bands.
* The Auto Log QSO option in "Settings->Reporting" now behaves the
same as the Prompt to log QSO option when not in a special
operating context mode.
* The Fast/Normal/Deep setting in Q65 mode is now a sticky setting
and is no longer reset to Fast on program startup or when Settings
has been opened. The user selection is used for automatic decodes,
but Deep is used for any subsequent manual decode attempts.
* New hamlib code to correct minor flaws in controlling several rigs.
* Update the Chinese and Hong Kong translations of the user
interface.
-------------------------------------------------------------------
Fri Oct 22 06:51:58 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.5.1
- Improved Q65 support for 10GHz Aircraft Scatter contributed by Rex,
VK7MO, and Roger, W3SZ. (See "10 GHz Terrestrial with Q65" in DUBUS
Vol 1/2021 page 64.) Decodes of type 'q3' may now include
corrections for frequency drift.
- Repair a defect that failed to pre-load the DE and DX calls to the
hash lookup tables in the Q65 decoder.
- Repair standard message Tx4 and Tx5 generation in Q65 mode when
using a non-standard call.
- Repair a defect in generation of the standard Tx2 JT65 message in
EME mode when using a compound call.
- Repair a defect when decoding 77-bit type 4 non-standard call
message.
- Repair a defect that could cause a crash when switching from Q65 to
JT65 mode and attempting a double-click decode.
- Enable 'q3' AP decoding in Q65 mode for messages containing a
non-standard call.
- Repair a defect that required a blank DX Grid to achieve Q65 'q3'
decodes of messages containing a non-standard call.
- Repair the logic that sets parameters for Q65 "Deep" decoding.
- In Q65 mode, allow 'q2' decodes when MyCall is compound or
non-standard.
- Repair a long-standing defect that could cause a crash when
reference spectrum correction is enabled.
- Updated UI translations from Xavi, EA3W, Oba-san, JA7UDE, and a new
translation for Traditional Chinese by Steven, BU2EL.
- Updated CTY.DAT database, tnx to Jim AD1C
- Improved main window layout to ensure TxN messages are fully
visible.
-------------------------------------------------------------------
Mon Sep 27 19:15:46 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.5.0
- Repair a defect that caused CAT errors when using WSPR band hopping
and auto tune-up with some Icom rigs.
- Ensure that CALL3.TXT is not deleted while updating the file (this
allows sharing using symlinks to work).
-------------------------------------------------------------------
Tue Sep 7 08:54:01 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.5.0-rc6
- Repair a file handle leak in wsprd (tnx Phil, KA9Q).
- Better handling of the Tx1 buttons when changing special operating
modes.
- Q65 mode now supports contest special operating modes.
- Repair an issue when non-ASCII characters used in account names.
- Repair a regression that prevented WSPR band-hopping working when
the Tx percentage is zero.
-------------------------------------------------------------------
Sat Aug 7 21:37:49 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.5.0-rc5
* Repair a regression that caused some messages involving compound
or nonstandard callsigns to be encoded as free text
-------------------------------------------------------------------
Wed Aug 4 08:12:38 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.5.0-rc4
- Repair a defect in CALL3.TXT lookups that incorrectly matched
partial calls
- Instructions in macOS ReadMe.txt to suppress App Nap energy saving
- Revised User Guide using FT8 mode for the basic tutorial
- Allow contest and FD operating in Q65 mode
-------------------------------------------------------------------
Mon Jul 5 14:21:06 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.5.0-rc3
- Repair a long standing defect that caused UDP Protocol Heartbeat
messages to not be sent when no other intervening messages are
sent.
-------------------------------------------------------------------
Mon Jun 28 17:15:52 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.5.0-rc2
MAP65:
- Compute polarization angle for Xpol systems and display to nearest
degree
- Compute and display the recommended Tx polarization
- Protect against Fortran bounds errors in several places
- Insert leading 0 when needed in UTC hours and minutes on waterfall
- Wideband Q65 synchronization corrected to include single-polarization
mode
- Corrected a one-symbol (0.6 s) delay in Q65 Tx audio
- Basic instruction document for building an MS Windows portaudio DLL
for MAP65 users who are unable to use WDM/KS drivers for their
multi-channel sound cards.
WSJT-X (including the decoder for Q65 used by MAP65):
- Increase maximum DT to 5.5 s when EME decoding is enabled in Q65
- Fix generation of Tx5 message when "hiscall" has suffix /P or /R.
- Improve width management of GUI's band-selection combo box
- Restore plotting of Q65 sync curve after a q3 decode
- Disable selection of "View | Message Averaging F7" for modes
other than JT4 and JT65
- Switching to Q65 mode now defaults to "Decode | Fast"
- Repair a long standing regression with message generation for
72-bit modes when using a compound callsign.
- Repair a defect in diagnostic logging that could cause crashes on
some platforms.
- Repair a defect which failed to strip leading and trailing spaces
on input of callsigns during validation.
- Hamlib updates including repair of defects with PTT handling on a
separate serial port via rigctld, delayed PTT with Elecraft K3
series rigs, and support for the Icom IC-575 rig.
- Updated CTY.DAT database
-------------------------------------------------------------------
Fri Jun 4 06:59:39 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.5.0-rc1
* Q65 decoder has been enhanced to measure and compensate for linear
frequency drift in Q65 signals.
* FST4W mode no longer saves .WAV files when "Menu->Save->None" is
checked.
-------------------------------------------------------------------
Thu May 27 06:47:03 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- Corrections to WSJT-X User Guide, thanks to LA6VQ.
-------------------------------------------------------------------
Tue May 25 12:03:42 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.4.0
- Repair a defect with own call decode highlighting when callsigns
with a common root are decoded.
- Q65 message averaging correctly disabled as be menu option.
- Repair a regression with missing timestamps in AlL.TXT for the
MSK144 mode.
- Repair a defect in the selection of working frequencies matching
the current band and mode combination.
- WSPR band hopping mode now generates a tune up tone for bands where
it is scheduled to transmit.
- Repair a long standing defect per band tune and Tx power level
memories.
- More flexibility for inputting calls into the DX Call field,
leading and trailing white space characters are allowed but
ignored.
-------------------------------------------------------------------
Sat Mar 27 08:06:44 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.4.0-rc4
- Correct a problem with display of Q65 sync curves for submodes
Q65-120x and Q65-300x.
- Audio frequency and decoded message are now saved for up to 100
most recent Q65 decodes. Subsequent double-click on waterfall will
search the list for the clicked frequency +/- 10 Hz, recover
"DXCall" from the mosr recent decode there, and attempt a decode at
that frequency with full "q3" sensitivity.
- Use new ADIF recommendations for Q65: mode=MFSK, submode=Q65.
- If "Single decode" is unchecked, look for Q65 decodes from
accumulated average even after obtaining a single-sequence
decode at selected Rx Freq.
- For data read from .wav files, display the original UTC (derived
from file name) on the waterfall instead of current UTC.
- Protect against bounds errors caused by unusual settings on the
Wide Graph.
- Correct a problem with Split operation in FT4 mode. Thanks to
JG1APX.
- version 2.3.1
- When sending traffic to a multicast UDP server ensure that the
local loop-back interface is used if no others are selected.
- Repair a defect in instance lock file handling that causes an
infinite loop on start up.
- Invert the PTT serial port sharing default behaviour, and enable
sharing when non-Hamlib CAT control is combined with direct serial
port PTT control.
- Allow the FST4 and FST4W decoders to continue after the first
successful decode when using negative NB values to try multiple NB
values.
- Repair defects in auto-sequencing, particularly with responding to
a repeated final message. In general a double-click of the repeated
message now does the right thing.
- Repair a regression that had inadvertently disabled EU VHF Contest
mode when using the MSK144 mode.
- Repair a defect that could caused incorrect log entry fields when
using FT4 mode and a priori (AP) decoding.
- Repair defects saving .WAV files for periods with decodes.
- Offer a new scheme for adjusting macOS shared memory parameters.
-------------------------------------------------------------------
Mon Mar 15 15:57:51 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.4.0-rc3
- Repaired a memory corruption related to display of Q65_Sync,
particularly nasty on macOS.
- Q65 now dissplays two sync curves: orange for the current sequence,
red for the accumulated average.
- Behavior of "Save decoded" has been corrected.
- Repaied a defect that caused crash when displaying the Wide Graph
with lower frequency limit set to 0.
- Program no longer terminates a transmission when Settings is
closed.
- Program no longer forces TxFreq to 700 or 1000 Hz when entering Q65
mode or closing Settings. Instead, it highlights TxFreq with red
background when its value should be 700 Hz but is not.
- Program displays a warning label if a contest mode is active in Q65
mode.
- Many updates to User Guide, mostly related to Q65.
- Repaired a regression that disallowed a new QSO initiation after an
abandoned QSO.
-------------------------------------------------------------------
Fri Mar 5 19:44:29 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.4.0-rc2
- Repair a defect that caused WSJT-X to crash when launched from an
icon on macOS.
- Repair a crash when using the JT4 mode.
- Sequencing improvements to hold transmitted signal report fixed
during a QSO.
- UI translation updates tnx to Sze-to, VR2UPU, and Michael, 5P1KZX.
- Enable the "Call 1st" option for Q65.
- Improved Q65 message averaging that linearly averages the first 4
sequences and averages exponentially thereafter using a
time-constant of 4 sequences.
- Improved macOS post-install instructions, tnx to John, G4KLA.
- Enhanced Q65 simulator that generates file names compatible with
message averaging, tnx Charlie, G3WDG.
- Q65 simulator option to generate single tone waveforms, tnx to
Charlie, G3WDG.
- Better suppression of birdies in the Q65 decoder.
- Blank Q65 decode messages removed.
- Automatic low Tx audio offset for the widest Q65 modes to keep Tx
signal in transmitter passband, tnx to Charlie, G3WDG.
- Improved SNR estimates for Q65 mode.
- Decode depths Fast/Normal/Deep are now identical in Q65 mode.
- "Save decoded" is now enabled for Q65 mode.
- The obsolete ISCAT mode has been removed
-------------------------------------------------------------------
Thu Feb 4 00:02:18 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.4.0-rc1
- New Mode Q65 with excellent characteristics when used for EME on
VHF through to microwave bands.
-------------------------------------------------------------------
Mon Feb 1 19:33:28 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.3.0
- FST4/W: Disable envelope shaping at start and end of transmission
when environment variable FST4_NOSHAPING=1. Works for fst4sim too.
- Add time stamp to error message boxes to aid diagnosis.
- Repair a defect that caused crashes at start up for some macOS Big
Sur users.
- Repair a defect that could cause the jt9 slow mode decoder process
to exit incorrectly with a failure status.
- Updated CTY.DAT file.
-------------------------------------------------------------------
Mon Jan 25 18:52:28 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.3.0-rc4
- The wsprd command line tool uses the current working directory for
the data file directory if it is not specified.
- Updates to the language translations of the WSJT-X user Interface.
- Updated CTY.DAT file.
-------------------------------------------------------------------
Wed Jan 6 08:16:36 UTC 2021 - Walter Fey <dl8fcl@darc.de>
- update to version 2.3.0-rc3
- FST4W: Improve FST4W decoder sensitivity on fading channels and
decrease false decode rate.
- FT8: Fixed a crash triggered by double clicking on the waterfall to
invoke a decode of a signal in the preceding T/R interval.
- FST4W: Do not save .c2 files.
- FST4W: Correct a bug that could cause incorrect operation when
using negative noise blanker (NB) percentage to trigger looping
over a range of NB percentages.
- fst4sim: Added simulation of Lorentzian fading spectrum, invoked by
negative fspread values.
- Color highlighting scheme window fixed in dark mode.
- Reports sent by QSO partners to other stations no longer logged in
error.
- UDP Status(1) message now includes the current Tx message.
- Example diagnostic logging configuration files included.
- Use system localization for date fields in Log QSO dialog.
- Improvements to audio input and output buffer sizes.
- wsprd: Fails gracefully if data directory does not exist.
- wsjtx_app_version: new utility to print application version string.
- Regression causing incorrect working frequency selection when
changing modes repaired.
- Regression with QSO initiation with "Best S&P" repaired.
- Updated installation instructions for macOS covering M1 hardware.
- Improved compatibility is Debian 9 required distribution packages.
- Repair regression with missing time-stamps in the ALL.TXT journal.
- Allow hamlib_settings.json to work with PTT only configurations so
that optional PTT sharing on RTS or DTR can be enabled.
- Several improvements to main window sizing and layout.
- Repair regression with OpenSSL libraries being required when LoTW
highlighting is not enabled.
- Repair a defect that caused 2 by 1 callsigns to be incorrectly
parsed as non-standard.
- Several updates to international UI translations.
-------------------------------------------------------------------
Mon Nov 16 15:18:54 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.3.0-rc2
- Dropped audio samples message box. Removed, warnings and errors for
these are now sent to the WSJT-X system log.
- FST4W spots to WSPRNet.org will be augmented such that the server
can distinguish the mode being spotted. Spots to WSPRNet.org will
no longer be restricted to WSPR sub-bands.
- A new internal system and data logging facility used to provide
trace, debug, information, warning, error, and fatal error
messages. The verbosity and filtering of messages is user definable
via a configuration file. Without a configuration file a basic log
is written with information, warning and error messages only. Log
files are automatically rotated to limit disk usage.
- Due to some users using inappropriate multicast IP addresses for
their interoperating severs the default behaviour now is to only
send multicast UDP datagrams to the loop-back network interface.
Users who require WSJT-X UDP Message Protocol datagrams to reach
other hosts will now have to configure WSJT-X to send on an
appropriate network interface, and use an appropriately scoped
multicast group address for their server applications. If you are
not sure then 224.0.0.1 (or ff02::1 if IPv6 is desired) is a safe
choice.
-------------------------------------------------------------------
Mon Sep 28 14:56:14 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.3.0-rc1
- New modes FST4 and FST4W targeting LF and MF bands.
- Improved noise baseline discovery for more reliable SNR estimates.
- On the waterfall and 2D spectrum a tool-tip shows the frequency
offset under the mouse pointer.
- The *On Dx Echo* Doppler compensation method has been modified in
response to feedback from Users. Basic functionality is unchanged.
See the User Guide (Section 8.1) for more information.
- Improved user_hardware script or program initiation for WSPR
band-hopping mode.
- Decoded QSO mode message display narrowed to make appended
information easier to view without scrolling the window.
- Option to record the propagation mode in logged QSO records.
- ADIF v3.1.1 compliance.
- Option to connect to PSKReporter using TCP/IP for those with very
poor Internet connections.
- Major rewrite of the PSKReporter interface to improve efficiency
and reduce traffic levels.
- Removal of the Tab 2 generated messages.
- Accessibility improvements to the UI.
- Tweaked decode speed options for a better user experience with
lower powered single-board computers like the Raspberry Pi.
- Updates to UI translations in Spanish, Italian, Catalan, Chinese,
Hong Kong Chinese, Danish, and Japanese.
- Audio devices only enumerated when starting up and opening the
"Settings->Audio" device lists.
- Option to select the default audio device removed to minimize the
likelihood of system sounds being transmitted.
- Better handling of missing audio devices.
- Improved and enhanced meta-data saved to .WAV files.
- More reliable multi-instance support.
- Included CTY.DAT file moved to installation share directory.
- Fixed some edge-case message packing and unpacking defects and
ambiguities.
- Fix a defect that allowed non-CQ messages to be replied to via theA
UDP Message Protocol.
- Fix a long-standing defect with Tx start timing.
- Repair a defect with style sheets when switching configurations.
- Repair defects that made the astronomical data window an several
main window controls unreadable when using the dark style sheet.
- Repair a regression with setting WSPR transmitted power levels.
- Repair a regression with newly created ADIF log file's header.
- Many other defects repaired.
-------------------------------------------------------------------
Mon Jun 22 15:50:43 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.2.2
- bug fix release, mainly to incorporate the new RAC section PE into the
FT8/FT4/MSK144 Contest Mode for Field Day. Stations intending to operate
in Field Day (FD) are urged to upgrade to this release.
- FT8 decoder speeded up in Normal and Fast modes.
- Thanks to our user interface language translation contributors for
many improvements to the translated strings.
- The DX Grid field is now cleared automatically when the DX Call
field is changed. Care should be taken to complete entry of a
callsign before entering a grid square.
-------------------------------------------------------------------
Wed Jun 10 08:40:35 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- disable CXX warnings for Tumbleweed
-------------------------------------------------------------------
Mon Jun 8 07:19:31 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.2.1
- Repair a defect in 6 character gridsquare lookup from the CALL3.TXT
database, and improve "Lookup" button processing.
- Repair a defect with selecting Wide Graph 2D spectrum types in
translated UIs.
- Repair a regression that blocked the Highlight Callsign UDP request
from highlighting terms including a '+' character.
- Repair a defect that caused hash code lookups of one's own call to
fail after an extended period of inactivity, when operating with a
non-standard callsign.
- Repair a regression where occasional Highlight Callsign UDP
requests with the 'Highlight last' parameter as true highlighted a
match in a prior period. This fix include a performance improvement
when processing any Highlight Callsign request with 'Highlight
last' as true.
- Include support for the Yaesu FT-920 when controlled by Ham Radio
Deluxe. This change inadvertently missed the v2.2.0 GA release.
- Correct a documentation issue with the UDP Message Protocol
Status(1) message Special Operations Mode enumeration values ("WW
DIGI added", Fox, and Hound renumbered). Thanks to Sam, W2JDB, for
raising this issue.
- Updated Catalan UI translation, tnx Xavi, EA3W.
- Italian UI translation, tnx Marco, PY1ZRJ.
- Updated Spanish UI translation, tnx Cedric, EA4AC.
-------------------------------------------------------------------
Tue Jun 2 20:42:40 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- update to version 2.2.0
* Significant improvements to the decoders for FT4, FT8, JT4, JT65 and WSPR.
* New format for "EU VHF Contest" Tx2 and Tx3 messages
* Keyboard shortcuts have been added
* User Interface Translations have been enabled. Available for Catalan,
Spanish, Japanese, Chinese, and Hong Kong Chinese.
* Other minor enhancements and bug fixes
* For detailed changelog see
http://www.physics.princeton.edu/pulsar/K1JT/Release_Notes.txt
* Patch wsjtx-HamlibTransceiver.diff removed. Fixed upstream.
* Patch wsjtx-qt_helpers.hpp.diff removed. Fixed upstream.
-------------------------------------------------------------------
Fri Mar 20 09:56:03 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- wsjtx-HamlibTransceiver.diff to fix changes in hamlib
hamlib_rig.h.diff removed
-------------------------------------------------------------------
Sat Mar 14 21:20:51 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- spec file improved
-------------------------------------------------------------------
Mon Jan 27 09:54:20 UTC 2020 - Walter Fey <dl8fcl@darc.de>
- wsjtx-qt_helpers.hpp.diff for Tumbleweed. Redefinition of
'struct std::hash<QString>' is breaking the build.
-------------------------------------------------------------------
Sun Dec 15 13:16:41 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- version patch renamed
-------------------------------------------------------------------
Thu Dec 5 16:19:53 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- hamlib_rig.h.diff to fix latest changes in hamlib
-------------------------------------------------------------------
Tue Nov 26 19:19:09 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.1.2
Bug fix only release which fixes a major regression
in the Hamlib package bundled with WSJT-X v2.1.1 which is
not used for this package.
-------------------------------------------------------------------
Mon Nov 25 19:53:45 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.1.1
- Document rules for the UDP message protocol.
- Fix bug that could cause display of a blank Settings window.
- Fix message parsing to properly handle 4-character directed CQs
- Fix a potential crash in the interface to Omni-Rig.
- Improve handling of unexpected rig off line status changes from
Omni-Rig.
- Add an option to highlight unworked 2-character grid fields rather
than 4-character grid squares.
- Fix bug that caused unwanted disabling of "Enable Tx" in Fox mode.
- Log duplicate contacts in FT8 DXpedition Fox mode.
- Regenerate the GFSK Tx waveform if Tx audio frequency is changed.
- Fix the behavior of double-clicking on a decoded message with first
callsign displayed as an unresolved hash code <...>.
- Fix a problem with determining "worked before" status after a band
change.
- Updates to the WSJT-X 2.1 User Guide.
- Fix a production issue with the macOS tool chain that generated
broken executables.
-------------------------------------------------------------------
Tue Oct 29 08:35:24 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- Fix for Tumbleweed - cmake macro is broken again.
-------------------------------------------------------------------
Fri Oct 4 08:37:58 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- use the fixed cmake macro for Tumbleweed
-------------------------------------------------------------------
Tue Jul 16 17:03:14 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- Fix for Tumbleweed build
-------------------------------------------------------------------
Mon Jul 15 19:28:54 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.1.0
* The FT4 protocol, designed for HF contesting
* Improved FT8 waveform generation
* Low-sidelobe option for waterfall and spectrum display
* Improved UDP messaging for inter-program communication
* Improved accessibility features
* Minor enhancements and bug fixes
-------------------------------------------------------------------
Mon Jun 3 18:37:58 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.1.0-rc7
bugfix for segfault while reading wsjtx_log.adi during start
-------------------------------------------------------------------
Sun Jun 2 19:36:57 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.1.0-rc6
IMPORTANT CHANGES TO THE FT4 PROTOCOL *** NOT BACKWARD COMPATIBLE ***
- T/R sequence length increased from 6.0 to 7.5 seconds
- Symbol rate decreased from 23.4375 to 20.8333 baud
- Signal bandwidth decreased from 90 Hz to 80 Hz
OTHER FT4 IMPROVEMENTS
- Allowable time offsets -1.0 < DT < +1.0 s
- Tx4 message with RRR now allowed, except in contest messages
- Audio frequency is now sent to PSK Reporter
- Add a third decoding pass
- Add ordered statistics decoding
- Improved sensitivity: threshold S/N is now -17.5 dB
- Improved S/N calculation
- In FT4 mode, Shift+F11/F12 moves Tx freq by +/- 100 Hz
OTHER IMPROVEMENTS
- Improvements to accessibility
- Updates to the User Guide (not yet complete, however)
- New user option: "Calling CQ forces Call 1st"
- N1MM Logger+ now uses the standard WSJT-X UDP messages
- OK/Cancel buttons on Log QSO window maintain fixed positions
- Put EU VHF contest serial numbers into the ADIF SRX and STX fields
BUG FIXES
- Fix generation of Tx5 message when one callsign is nonstandard
- Fix a bug that prevented use on macOS
- Fix a bug that caused mode switch from FT4 to FT8
- Fix a bug that caused FT4 to do WSPR-style band hopping
- Fix a bug that caused a Fortran bounds error
-------------------------------------------------------------------
Sun May 19 20:23:55 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- Start with style fusion
-------------------------------------------------------------------
Tue Apr 30 20:13:59 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.1.0-rc5
rc1
- FT4 mode, a new mode targeted at HF digital contesting
- GMSK modulation for FT4 and FT8
- New waterfall option to select between raw sensitivity or a
filtered signal representation for best visualization of signal
quality
rc2
- Better options for QSO flow by clicking Tx# buttons to transmit
- A 64-bit package for Windows 64-bit systems
- Improved FT4 sync detection speed
rc3
- change the new FT4 mode to a synchronous T/R period of 6 seconds
rc4
- New "Call Best" button for FT4 mode to select the best reply to a
CQ call based on neediness.
- Fixed UTC display on FT4 waterfall.
rc5
- minor changes
-------------------------------------------------------------------
Mon Feb 25 20:44:39 UTC 2019 - Walter Fey <dl8fcl@darc.de>
- update to version 2.0.1
- Remove startup message about importance of upgrading to v2.0.
- Relax ADIF log file parsing to allow garbage between records and
records with no DX callsign
- Fix bug that prevented retention of power and comments in
Log QSO window
- Updates to User Guide
- MSK144 frequency defaults to 50.260 in IARU Regions 2 and 3
- Remove hexadecimal RGB values from color-configuration panel
- Fix a bounds error by not executing Fox-related code when not
in Fox mode
- Allow the logQSO dialog to modify "Exch Sent" or "Rcvd" when
operating in RTTY or NA VHF Contest mode, and to have any
changes flow through to N1MM Logger.
- Fix several problems in handling hashed callsigns
- More rigorous quality checking of WSPR decodes from the OSD algorithm
- Fix bug that prevented recevied signal reports from
compound callsigns to be logged
- Improved recognition of callsigns with /P or /R suffixes
- Do not waste time trying AP decoding of nonstandard callsigns
- Make OSD decoding work with WSPR "type 2" messages
- Retain in Tx6 message field any CQ messages like
"CQ xxxx K1ABC FN42", where xxxx is 1-4 letters or 1-3 digits
- Optional key bindings for F1 through F5, especially for contest use
- Include grid in Tx1 messages with hashed callsign, for example
"<DF2018ARDF> K1ABC FN42"
- Better formatting for the files ALL.TXT and ALL_WSPR.TXT
- Correct a flaw in validating contest exchange data when logging
- Option to always start new decode periods at top of Band
Activity window
- New command "Erase WSPR hashtable" on the File menu
- Improved validation for ARRL RTTY RU and FD exchange fields
- UDP Reference applications join a multicast group on all available
multicast capable network interfaces
- Minor code changes to support Qt versions >=5.10
- Changes to support x64 Windows builds in preparation for Qt v5.12
- Add "ADIF Export ..." to Fox Log's contextual popup menu
- Use ARRL-required names for VHF+ bands in exported Cabrillo log
- New utility program rigctlcom-wsjtx (from Hamlib)
- Remove temporary FT8 working frequencies from default frequency list
- UDP protocol's Clear (3) message is made two-way, for better
communication with DX Lab Suite applications
- Reset QSO start time when aborting a QSO or clearing messages by ESC
or F4
- Correct a logging issue in Fox's ADIF log when Fox sends RR73 to more
than one Hound in the same Tx sequence.
-------------------------------------------------------------------
Wed Feb 13 23:43:37 UTC 2019 - dl8fcl@darc.de
- build requirements fixed
-------------------------------------------------------------------
Sun Dec 30 09:50:13 UTC 2018 - dl8fcl@darc.de
- patch to not build/install redundant binaries with hamlib
found at fedorainfracloud.org from Richard Shaw(hobbes1069)
-------------------------------------------------------------------
Mon Dec 10 20:59:52 UTC 2018 - dl8fcl@darc.de
- update to version 2.0.0
for the new features and enhancements
check http://www.physics.princeton.edu/pulsar/K1JT/wsjtx.html
Replace deprecated/removed cmake command patch removed
-------------------------------------------------------------------
Tue Nov 20 22:18:53 UTC 2018 - dl8fcl@darc.de
- a tag added, to show on pskreporter who is using this version
-------------------------------------------------------------------
Mon Jun 18 14:07:07 UTC 2018 - dl8fcl@darc.de
- fix for Tumbleweed. Replace deprecated/removed cmake command
-------------------------------------------------------------------
Wed May 30 06:23:36 UTC 2018 - dl8fcl@darc.de
- update to version 1.9.1
bugfix release
-------------------------------------------------------------------
Sun May 27 07:17:27 UTC 2018 - dl8fcl@darc.de
- update to version 1.9.0
New FT8 DXpedition Mode to facilitate high QSO rates in pileup
situations
A lot of other improvements and bug fixes
-------------------------------------------------------------------
Sat Oct 28 23:39:10 UTC 2017 - dl8fcl@darc.de
- update to version 1.8.0
-------------------------------------------------------------------
Mon Dec 19 22:39:35 UTC 2016 - dl8fcl@t-online.de
- update to the latest 1.7.1 svn version
-------------------------------------------------------------------
Mon Nov 23 19:35:22 UTC 2015 - dl8fcl@t-online.de
- update to the latest 1.7.0 svn version
-------------------------------------------------------------------
Mon Jul 6 05:24:01 UTC 2015 - dl8fcl@darc.de
- update to the latest 1.6.1 svn version
-------------------------------------------------------------------
Sat Nov 8 11:14:12 UTC 2014 - dl8fcl@darc.de
- import into buildservice
