Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
home:dl8fcl:wsjtx-rc
wsjtx
wsjtx.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File wsjtx.changes of Package wsjtx
------------------------------------------------------------------- Wed Mar 13 08:15:36 UTC 2024 - Walter Fey <dl8fcl@darc.de> - update to version 2.7.0-rc4 - QMAP enhancements -- of particular interest to EME operators: * QMAP now decodes Q65 submodes with both 60-second and 30-second T/R sequence lengths. Clicking on a resulting line in the WSJT-X Active Stations window automatically sets dial frequency and working submode as needed to call that station. * QMAP operates in 60-second receive sequences, and its Q65 decoder starts at t=19.5, 30.0, 49.5, and 58.5 s into the sequence. Most decoded messages are displayed well before the end of the relevant time slot. * A new, more compact file format is now used for wideband data files. A "Save decoded" option has been added to the Save menu. * An option has been added to allow exporting a 3 kHz portion of a wideband data file as a standard WSJT-X *.wav file. * CTRL+click on QMAP's upper waterfall sends an integer kHz dial frequency request to WSJT-X. * With focus on the WSJT-X main window, hit Alt+A on the keyboard to clear the Active Stations window. * Many minor enhancements to the User Interface. - WSJT-X: * Enable decoding of MSK144 from the jt9[.exe] executable. * Several changes to reduce problems experienced when (contrary to our recommendations) messages with short (10-bit) callsign hashes are used in standard FT4/FT8 sub-bands. ------------------------------------------------------------------- Tue Jan 2 09:36:03 UTC 2024 - Walter Fey <dl8fcl@darc.de> - update to version 2.7.0-rc3 * Added a new "Update Hamlib" function. On Windows, it allows the user to update Hamlib directly from the program. The previously used version is backed up, so the user can easily revert a hamlib update. * The Hamlib version in use is now displayed (also on Linux and macOS). * The FT Roundup Messages protocol has been enhanced. It now allows also the exchange of static 4-digit numbers instead of serial numbers. This extends the usability of the FT RU protocol for other contest types. * Improved direct switching between modes. Submode, as well as the status of the "Sh" and "Fast" checkboxes are now saved and restored by mode. * Some right-click events were made more intuitive and consistent. . Right-clicking the Q65 button enables Q65 Pileup mode, a left-click brings you back to the normal Q65 mode. . Right-click the JT65 button to switch to JT9 mode. * For Q65, all messages for us are now displayed in the right window. * Message averaging is now allowed only when VHF features are enabled, and label texts are changed to "Single Period Decodes" and "Average Decodes" only if averaging is enabled. * Some improvements to the Hamlib Transceiver code. Behavior is now more stable when Rig Split has been selected. * Prevented redundant network communication between WSJT-X and DX Lab Suite Commander. * Download of the LotW file now works without OpenSSL libraries. * Made the spot counter work for WSPR. * Prevented insertion of an individual contest name when in Fox mode. * WAE entities are now assigned to the correct DXCC when "Include extra WAE entities" is not selected. * Added a utility program 'cablog' which can be used to convert the wsjtx.log file to Cabrillo format for the ARRL EME contest. * Minor improvements to the Active Stations window. * The Rx/Tx frequency for Echo mode has been fixed at 1500 Hz. * Some corrections and updates to the INSTALL instructions for Linux. * Updated CTY.DAT file. ------------------------------------------------------------------- Fri Jul 7 21:15:46 UTC 2023 - Walter Fey <dl8fcl@darc.de> - update to version 2.7.0-rc2 * CTRL+SHIFT+F11/F12 now changes dial frequency by 1000 Hz instead of 2000 Hz. * Improved spotting to PSK Reporter for upcoming HamSCI Festivals of Eclipse Ionospheric Science. * Added optional Hungarian translation of the user interface. * Fixed a flaw that could produce false decodes in Q65 submodes D and E. * Fixed a flaw with the QSO start time. It is now reset when the DX Call changes. * Fixed a flaw that prevented contest logging of the ARRL Digi Contest. * Right-clicking the Q65 mode button to toggle the Q65 Pileup mode on/off now also works on macOS. * Fixed a compilation error on macOS Ventura. * WSPR and FST4W band hopping now works again. * It is now ensured that "U.S.A." is displayed when using certain cty.dat files. * Corrected the problem with duplicated FT8 entries in ActiveStations window. ------------------------------------------------------------------- Tue May 23 07:56:42 UTC 2023 - Walter Fey <dl8fcl@darc.de> - update to version 2.7.0-rc1 * QMAP and Q65 Pileup mode are of particular interest to those engaged in Earth-Moon-Earth (EME) communication, but other applications may be found for them as well. * QMAP is derived from MAP65, an older program used since 2007 for EME, mainly on the 2 m band. QMAP provides single-polarization receive-only capabilities for any one of the 60-second submodes of Q65. It allows you to monitor all traffic in a 90 kHz subband while conducting EME QSOs in the usual way with WSJT-X. * Q65 Pileup mode is a new feature in WSJT-X that will assist DX operators using Q65 in pileup circumstances with many simultaneous callers and very weak signals, such as those experienced by 6-meter EME DXpeditions. * Further details on QMAP and Q65 Pileup mode are available in a Quick-Start guide posted here: https://wsjt.sourceforge.io/Quick_Start_WSJT-X_2.7_QMAP.pdf * WSJT-X now provides more efficient spotting to PSK Reporter. Redundant spots are omitted, and posting of spots is now spread more widely in time. (Temporarily, in support of the HamSCI Festivals of Eclipse Ionospheric Science, spots will be transmitted more frequently during the upcoming solar eclipses.) * WSJT-X is now able to process more than 100 FT8 decodes in a single reception interval. * Improvements to the Fox mode: * More convenient and efficient handling of the two queues. * Fox Log window now displays statistical data on the QSO rate. * When the station locator is changed (e.g during portable operations), the new locator will be sent automatically to PSK Reporter. * The cty.dat file can now be updated by clicking a button on the Settings -> Colors tab. * A new status display appears when fetching a new LotW file. * Multi-streamed messages transmitted by MSHV are now handled properly when WSJT-X is in Hound mode. * Auto-sequencing now has better protection against unwanted effects caused by late FT8 decodes. * Fixed an inconsistency in which Contest Name was not correctly remembered. * Other minor bug fixes. * Updated hyperlinks to our homepage and to our new WSJT GROUP User Forum (https://groups.io/g/wsjtgroup/) can now also be found in the User Guide. * The build instructions for macOS have been clarified. ------------------------------------------------------------------- Mon Jan 16 21:23:30 UTC 2023 - Walter Fey <dl8fcl@darc.de> - update to version 2.6.1 * Fix a flaw in Q65 mode that prevented proper display of the T/R period spinner. * Make the initialization of the decoded text font more robust. * Better initialization when starting the program in FT8 Hound mode. * Fix a bug causing program crash with more than 100 decodes in a single FT8 sequence. * Fix a compiler warning on macOS. * Correct the reference to "ARRL International Digital Contest" in the Release Notes. ------------------------------------------------------------------- Sat Jan 7 08:28:33 UTC 2023 - Walter Fey <dl8fcl@darc.de> - update to version 2.6.0 * Mode selection buttons on main window for FT4, FT8, JT65, MSK144, Q65, and FT8's Hound mode * Support for the ARRL International DX Contest * Performance enhancements for the FT8 and Q65 modes * New features for EME Echo mode, including calibrated SNR reports * Several new convenience features for Fox operators * Save/Restore capability, "Preferred" status, and effective date ranges for mode-dependent tables of default frequencies * Improved display features for contest log * Improved calibration of SNR estimates for modes FST4 and FST4W ------------------------------------------------------------------- Mon Jan 3 23:47:41 UTC 2022 - Walter Fey <dl8fcl@darc.de> - update to version 2.5.4 * Repair a defect that caused occasional crashes when in QSO with stations using nonstandard callsigns. ------------------------------------------------------------------- Tue Dec 14 09:08:48 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.5.3 * Add a note in memory of G4WJS to the About window * Add a simple $DXCALL macro capability for Tx messages, and update the User Guide accordingly * Ensure that MAIN VFO is used for receiving on rigs that require it * Repair a defect in reporting low-confidence decodes to PskReporter * Updated CTY.DAT database, tnx to Jim AD1C ------------------------------------------------------------------- Fri Nov 5 10:07:06 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.5.2 * Repair a longstanding regression that caused si tail-ended Tx2 messages to be omitted from logged information * Parse "dx-call-1 RR73; dx-call-2 <de-call> +nn" messages (i3=0, n3=1 DXpedition mode) in regular 77-bit modes * Repair a regression associated with setting the main window width on program startup. * Repair a problem with Q65 decodes of type 'q3' for messages of the form "<Call_1> Call_2" * Execute code associated with Q65 decodes of type 'q5' only when the Max Drift control is set to 50. This fix prevents double-incrementing of the message averaging counter on the first decoding sequence. * Polarization offset 'Dpol' from the astronomical data window is now written to file azel.dat if environment variable WSJT_AZEL_EXTRA_LINES has been defined as 1 or greater. Dpol is especially useful for EME on the higher microwave bands. * The Auto Log QSO option in "Settings->Reporting" now behaves the same as the Prompt to log QSO option when not in a special operating context mode. * The Fast/Normal/Deep setting in Q65 mode is now a sticky setting and is no longer reset to Fast on program startup or when Settings has been opened. The user selection is used for automatic decodes, but Deep is used for any subsequent manual decode attempts. * New hamlib code to correct minor flaws in controlling several rigs. * Update the Chinese and Hong Kong translations of the user interface. ------------------------------------------------------------------- Fri Oct 22 06:51:58 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.5.1 - Improved Q65 support for 10GHz Aircraft Scatter contributed by Rex, VK7MO, and Roger, W3SZ. (See "10 GHz Terrestrial with Q65" in DUBUS Vol 1/2021 page 64.) Decodes of type 'q3' may now include corrections for frequency drift. - Repair a defect that failed to pre-load the DE and DX calls to the hash lookup tables in the Q65 decoder. - Repair standard message Tx4 and Tx5 generation in Q65 mode when using a non-standard call. - Repair a defect in generation of the standard Tx2 JT65 message in EME mode when using a compound call. - Repair a defect when decoding 77-bit type 4 non-standard call message. - Repair a defect that could cause a crash when switching from Q65 to JT65 mode and attempting a double-click decode. - Enable 'q3' AP decoding in Q65 mode for messages containing a non-standard call. - Repair a defect that required a blank DX Grid to achieve Q65 'q3' decodes of messages containing a non-standard call. - Repair the logic that sets parameters for Q65 "Deep" decoding. - In Q65 mode, allow 'q2' decodes when MyCall is compound or non-standard. - Repair a long-standing defect that could cause a crash when reference spectrum correction is enabled. - Updated UI translations from Xavi, EA3W, Oba-san, JA7UDE, and a new translation for Traditional Chinese by Steven, BU2EL. - Updated CTY.DAT database, tnx to Jim AD1C - Improved main window layout to ensure TxN messages are fully visible. ------------------------------------------------------------------- Mon Sep 27 19:15:46 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.5.0 - Repair a defect that caused CAT errors when using WSPR band hopping and auto tune-up with some Icom rigs. - Ensure that CALL3.TXT is not deleted while updating the file (this allows sharing using symlinks to work). ------------------------------------------------------------------- Tue Sep 7 08:54:01 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.5.0-rc6 - Repair a file handle leak in wsprd (tnx Phil, KA9Q). - Better handling of the Tx1 buttons when changing special operating modes. - Q65 mode now supports contest special operating modes. - Repair an issue when non-ASCII characters used in account names. - Repair a regression that prevented WSPR band-hopping working when the Tx percentage is zero. ------------------------------------------------------------------- Sat Aug 7 21:37:49 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.5.0-rc5 * Repair a regression that caused some messages involving compound or nonstandard callsigns to be encoded as free text ------------------------------------------------------------------- Wed Aug 4 08:12:38 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.5.0-rc4 - Repair a defect in CALL3.TXT lookups that incorrectly matched partial calls - Instructions in macOS ReadMe.txt to suppress App Nap energy saving - Revised User Guide using FT8 mode for the basic tutorial - Allow contest and FD operating in Q65 mode ------------------------------------------------------------------- Mon Jul 5 14:21:06 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.5.0-rc3 - Repair a long standing defect that caused UDP Protocol Heartbeat messages to not be sent when no other intervening messages are sent. ------------------------------------------------------------------- Mon Jun 28 17:15:52 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.5.0-rc2 MAP65: - Compute polarization angle for Xpol systems and display to nearest degree - Compute and display the recommended Tx polarization - Protect against Fortran bounds errors in several places - Insert leading 0 when needed in UTC hours and minutes on waterfall - Wideband Q65 synchronization corrected to include single-polarization mode - Corrected a one-symbol (0.6 s) delay in Q65 Tx audio - Basic instruction document for building an MS Windows portaudio DLL for MAP65 users who are unable to use WDM/KS drivers for their multi-channel sound cards. WSJT-X (including the decoder for Q65 used by MAP65): - Increase maximum DT to 5.5 s when EME decoding is enabled in Q65 - Fix generation of Tx5 message when "hiscall" has suffix /P or /R. - Improve width management of GUI's band-selection combo box - Restore plotting of Q65 sync curve after a q3 decode - Disable selection of "View | Message Averaging F7" for modes other than JT4 and JT65 - Switching to Q65 mode now defaults to "Decode | Fast" - Repair a long standing regression with message generation for 72-bit modes when using a compound callsign. - Repair a defect in diagnostic logging that could cause crashes on some platforms. - Repair a defect which failed to strip leading and trailing spaces on input of callsigns during validation. - Hamlib updates including repair of defects with PTT handling on a separate serial port via rigctld, delayed PTT with Elecraft K3 series rigs, and support for the Icom IC-575 rig. - Updated CTY.DAT database ------------------------------------------------------------------- Fri Jun 4 06:59:39 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.5.0-rc1 * Q65 decoder has been enhanced to measure and compensate for linear frequency drift in Q65 signals. * FST4W mode no longer saves .WAV files when "Menu->Save->None" is checked. ------------------------------------------------------------------- Thu May 27 06:47:03 UTC 2021 - Walter Fey <dl8fcl@darc.de> - Corrections to WSJT-X User Guide, thanks to LA6VQ. ------------------------------------------------------------------- Tue May 25 12:03:42 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.4.0 - Repair a defect with own call decode highlighting when callsigns with a common root are decoded. - Q65 message averaging correctly disabled as be menu option. - Repair a regression with missing timestamps in AlL.TXT for the MSK144 mode. - Repair a defect in the selection of working frequencies matching the current band and mode combination. - WSPR band hopping mode now generates a tune up tone for bands where it is scheduled to transmit. - Repair a long standing defect per band tune and Tx power level memories. - More flexibility for inputting calls into the DX Call field, leading and trailing white space characters are allowed but ignored. ------------------------------------------------------------------- Sat Mar 27 08:06:44 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.4.0-rc4 - Correct a problem with display of Q65 sync curves for submodes Q65-120x and Q65-300x. - Audio frequency and decoded message are now saved for up to 100 most recent Q65 decodes. Subsequent double-click on waterfall will search the list for the clicked frequency +/- 10 Hz, recover "DXCall" from the mosr recent decode there, and attempt a decode at that frequency with full "q3" sensitivity. - Use new ADIF recommendations for Q65: mode=MFSK, submode=Q65. - If "Single decode" is unchecked, look for Q65 decodes from accumulated average even after obtaining a single-sequence decode at selected Rx Freq. - For data read from .wav files, display the original UTC (derived from file name) on the waterfall instead of current UTC. - Protect against bounds errors caused by unusual settings on the Wide Graph. - Correct a problem with Split operation in FT4 mode. Thanks to JG1APX. - version 2.3.1 - When sending traffic to a multicast UDP server ensure that the local loop-back interface is used if no others are selected. - Repair a defect in instance lock file handling that causes an infinite loop on start up. - Invert the PTT serial port sharing default behaviour, and enable sharing when non-Hamlib CAT control is combined with direct serial port PTT control. - Allow the FST4 and FST4W decoders to continue after the first successful decode when using negative NB values to try multiple NB values. - Repair defects in auto-sequencing, particularly with responding to a repeated final message. In general a double-click of the repeated message now does the right thing. - Repair a regression that had inadvertently disabled EU VHF Contest mode when using the MSK144 mode. - Repair a defect that could caused incorrect log entry fields when using FT4 mode and a priori (AP) decoding. - Repair defects saving .WAV files for periods with decodes. - Offer a new scheme for adjusting macOS shared memory parameters. ------------------------------------------------------------------- Mon Mar 15 15:57:51 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.4.0-rc3 - Repaired a memory corruption related to display of Q65_Sync, particularly nasty on macOS. - Q65 now dissplays two sync curves: orange for the current sequence, red for the accumulated average. - Behavior of "Save decoded" has been corrected. - Repaied a defect that caused crash when displaying the Wide Graph with lower frequency limit set to 0. - Program no longer terminates a transmission when Settings is closed. - Program no longer forces TxFreq to 700 or 1000 Hz when entering Q65 mode or closing Settings. Instead, it highlights TxFreq with red background when its value should be 700 Hz but is not. - Program displays a warning label if a contest mode is active in Q65 mode. - Many updates to User Guide, mostly related to Q65. - Repaired a regression that disallowed a new QSO initiation after an abandoned QSO. ------------------------------------------------------------------- Fri Mar 5 19:44:29 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.4.0-rc2 - Repair a defect that caused WSJT-X to crash when launched from an icon on macOS. - Repair a crash when using the JT4 mode. - Sequencing improvements to hold transmitted signal report fixed during a QSO. - UI translation updates tnx to Sze-to, VR2UPU, and Michael, 5P1KZX. - Enable the "Call 1st" option for Q65. - Improved Q65 message averaging that linearly averages the first 4 sequences and averages exponentially thereafter using a time-constant of 4 sequences. - Improved macOS post-install instructions, tnx to John, G4KLA. - Enhanced Q65 simulator that generates file names compatible with message averaging, tnx Charlie, G3WDG. - Q65 simulator option to generate single tone waveforms, tnx to Charlie, G3WDG. - Better suppression of birdies in the Q65 decoder. - Blank Q65 decode messages removed. - Automatic low Tx audio offset for the widest Q65 modes to keep Tx signal in transmitter passband, tnx to Charlie, G3WDG. - Improved SNR estimates for Q65 mode. - Decode depths Fast/Normal/Deep are now identical in Q65 mode. - "Save decoded" is now enabled for Q65 mode. - The obsolete ISCAT mode has been removed ------------------------------------------------------------------- Thu Feb 4 00:02:18 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.4.0-rc1 - New Mode Q65 with excellent characteristics when used for EME on VHF through to microwave bands. ------------------------------------------------------------------- Mon Feb 1 19:33:28 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.3.0 - FST4/W: Disable envelope shaping at start and end of transmission when environment variable FST4_NOSHAPING=1. Works for fst4sim too. - Add time stamp to error message boxes to aid diagnosis. - Repair a defect that caused crashes at start up for some macOS Big Sur users. - Repair a defect that could cause the jt9 slow mode decoder process to exit incorrectly with a failure status. - Updated CTY.DAT file. ------------------------------------------------------------------- Mon Jan 25 18:52:28 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.3.0-rc4 - The wsprd command line tool uses the current working directory for the data file directory if it is not specified. - Updates to the language translations of the WSJT-X user Interface. - Updated CTY.DAT file. ------------------------------------------------------------------- Wed Jan 6 08:16:36 UTC 2021 - Walter Fey <dl8fcl@darc.de> - update to version 2.3.0-rc3 - FST4W: Improve FST4W decoder sensitivity on fading channels and decrease false decode rate. - FT8: Fixed a crash triggered by double clicking on the waterfall to invoke a decode of a signal in the preceding T/R interval. - FST4W: Do not save .c2 files. - FST4W: Correct a bug that could cause incorrect operation when using negative noise blanker (NB) percentage to trigger looping over a range of NB percentages. - fst4sim: Added simulation of Lorentzian fading spectrum, invoked by negative fspread values. - Color highlighting scheme window fixed in dark mode. - Reports sent by QSO partners to other stations no longer logged in error. - UDP Status(1) message now includes the current Tx message. - Example diagnostic logging configuration files included. - Use system localization for date fields in Log QSO dialog. - Improvements to audio input and output buffer sizes. - wsprd: Fails gracefully if data directory does not exist. - wsjtx_app_version: new utility to print application version string. - Regression causing incorrect working frequency selection when changing modes repaired. - Regression with QSO initiation with "Best S&P" repaired. - Updated installation instructions for macOS covering M1 hardware. - Improved compatibility is Debian 9 required distribution packages. - Repair regression with missing time-stamps in the ALL.TXT journal. - Allow hamlib_settings.json to work with PTT only configurations so that optional PTT sharing on RTS or DTR can be enabled. - Several improvements to main window sizing and layout. - Repair regression with OpenSSL libraries being required when LoTW highlighting is not enabled. - Repair a defect that caused 2 by 1 callsigns to be incorrectly parsed as non-standard. - Several updates to international UI translations. ------------------------------------------------------------------- Mon Nov 16 15:18:54 UTC 2020 - Walter Fey <dl8fcl@darc.de> - update to version 2.3.0-rc2 - Dropped audio samples message box. Removed, warnings and errors for these are now sent to the WSJT-X system log. - FST4W spots to WSPRNet.org will be augmented such that the server can distinguish the mode being spotted. Spots to WSPRNet.org will no longer be restricted to WSPR sub-bands. - A new internal system and data logging facility used to provide trace, debug, information, warning, error, and fatal error messages. The verbosity and filtering of messages is user definable via a configuration file. Without a configuration file a basic log is written with information, warning and error messages only. Log files are automatically rotated to limit disk usage. - Due to some users using inappropriate multicast IP addresses for their interoperating severs the default behaviour now is to only send multicast UDP datagrams to the loop-back network interface. Users who require WSJT-X UDP Message Protocol datagrams to reach other hosts will now have to configure WSJT-X to send on an appropriate network interface, and use an appropriately scoped multicast group address for their server applications. If you are not sure then 224.0.0.1 (or ff02::1 if IPv6 is desired) is a safe choice. ------------------------------------------------------------------- Mon Sep 28 14:56:14 UTC 2020 - Walter Fey <dl8fcl@darc.de> - update to version 2.3.0-rc1 - New modes FST4 and FST4W targeting LF and MF bands. - Improved noise baseline discovery for more reliable SNR estimates. - On the waterfall and 2D spectrum a tool-tip shows the frequency offset under the mouse pointer. - The *On Dx Echo* Doppler compensation method has been modified in response to feedback from Users. Basic functionality is unchanged. See the User Guide (Section 8.1) for more information. - Improved user_hardware script or program initiation for WSPR band-hopping mode. - Decoded QSO mode message display narrowed to make appended information easier to view without scrolling the window. - Option to record the propagation mode in logged QSO records. - ADIF v3.1.1 compliance. - Option to connect to PSKReporter using TCP/IP for those with very poor Internet connections. - Major rewrite of the PSKReporter interface to improve efficiency and reduce traffic levels. - Removal of the Tab 2 generated messages. - Accessibility improvements to the UI. - Tweaked decode speed options for a better user experience with lower powered single-board computers like the Raspberry Pi. - Updates to UI translations in Spanish, Italian, Catalan, Chinese, Hong Kong Chinese, Danish, and Japanese. - Audio devices only enumerated when starting up and opening the "Settings->Audio" device lists. - Option to select the default audio device removed to minimize the likelihood of system sounds being transmitted. - Better handling of missing audio devices. - Improved and enhanced meta-data saved to .WAV files. - More reliable multi-instance support. - Included CTY.DAT file moved to installation share directory. - Fixed some edge-case message packing and unpacking defects and ambiguities. - Fix a defect that allowed non-CQ messages to be replied to via theA UDP Message Protocol. - Fix a long-standing defect with Tx start timing. - Repair a defect with style sheets when switching configurations. - Repair defects that made the astronomical data window an several main window controls unreadable when using the dark style sheet. - Repair a regression with setting WSPR transmitted power levels. - Repair a regression with newly created ADIF log file's header. - Many other defects repaired. ------------------------------------------------------------------- Mon Jun 22 15:50:43 UTC 2020 - Walter Fey <dl8fcl@darc.de> - update to version 2.2.2 - bug fix release, mainly to incorporate the new RAC section PE into the FT8/FT4/MSK144 Contest Mode for Field Day. Stations intending to operate in Field Day (FD) are urged to upgrade to this release. - FT8 decoder speeded up in Normal and Fast modes. - Thanks to our user interface language translation contributors for many improvements to the translated strings. - The DX Grid field is now cleared automatically when the DX Call field is changed. Care should be taken to complete entry of a callsign before entering a grid square. ------------------------------------------------------------------- Wed Jun 10 08:40:35 UTC 2020 - Walter Fey <dl8fcl@darc.de> - disable CXX warnings for Tumbleweed ------------------------------------------------------------------- Mon Jun 8 07:19:31 UTC 2020 - Walter Fey <dl8fcl@darc.de> - update to version 2.2.1 - Repair a defect in 6 character gridsquare lookup from the CALL3.TXT database, and improve "Lookup" button processing. - Repair a defect with selecting Wide Graph 2D spectrum types in translated UIs. - Repair a regression that blocked the Highlight Callsign UDP request from highlighting terms including a '+' character. - Repair a defect that caused hash code lookups of one's own call to fail after an extended period of inactivity, when operating with a non-standard callsign. - Repair a regression where occasional Highlight Callsign UDP requests with the 'Highlight last' parameter as true highlighted a match in a prior period. This fix include a performance improvement when processing any Highlight Callsign request with 'Highlight last' as true. - Include support for the Yaesu FT-920 when controlled by Ham Radio Deluxe. This change inadvertently missed the v2.2.0 GA release. - Correct a documentation issue with the UDP Message Protocol Status(1) message Special Operations Mode enumeration values ("WW DIGI added", Fox, and Hound renumbered). Thanks to Sam, W2JDB, for raising this issue. - Updated Catalan UI translation, tnx Xavi, EA3W. - Italian UI translation, tnx Marco, PY1ZRJ. - Updated Spanish UI translation, tnx Cedric, EA4AC. ------------------------------------------------------------------- Tue Jun 2 20:42:40 UTC 2020 - Walter Fey <dl8fcl@darc.de> - update to version 2.2.0 * Significant improvements to the decoders for FT4, FT8, JT4, JT65 and WSPR. * New format for "EU VHF Contest" Tx2 and Tx3 messages * Keyboard shortcuts have been added * User Interface Translations have been enabled. Available for Catalan, Spanish, Japanese, Chinese, and Hong Kong Chinese. * Other minor enhancements and bug fixes * For detailed changelog see http://www.physics.princeton.edu/pulsar/K1JT/Release_Notes.txt * Patch wsjtx-HamlibTransceiver.diff removed. Fixed upstream. * Patch wsjtx-qt_helpers.hpp.diff removed. Fixed upstream. ------------------------------------------------------------------- Fri Mar 20 09:56:03 UTC 2020 - Walter Fey <dl8fcl@darc.de> - wsjtx-HamlibTransceiver.diff to fix changes in hamlib hamlib_rig.h.diff removed ------------------------------------------------------------------- Sat Mar 14 21:20:51 UTC 2020 - Walter Fey <dl8fcl@darc.de> - spec file improved ------------------------------------------------------------------- Mon Jan 27 09:54:20 UTC 2020 - Walter Fey <dl8fcl@darc.de> - wsjtx-qt_helpers.hpp.diff for Tumbleweed. Redefinition of 'struct std::hash<QString>' is breaking the build. ------------------------------------------------------------------- Sun Dec 15 13:16:41 UTC 2019 - Walter Fey <dl8fcl@darc.de> - version patch renamed ------------------------------------------------------------------- Thu Dec 5 16:19:53 UTC 2019 - Walter Fey <dl8fcl@darc.de> - hamlib_rig.h.diff to fix latest changes in hamlib ------------------------------------------------------------------- Tue Nov 26 19:19:09 UTC 2019 - Walter Fey <dl8fcl@darc.de> - update to version 2.1.2 Bug fix only release which fixes a major regression in the Hamlib package bundled with WSJT-X v2.1.1 which is not used for this package. ------------------------------------------------------------------- Mon Nov 25 19:53:45 UTC 2019 - Walter Fey <dl8fcl@darc.de> - update to version 2.1.1 - Document rules for the UDP message protocol. - Fix bug that could cause display of a blank Settings window. - Fix message parsing to properly handle 4-character directed CQs - Fix a potential crash in the interface to Omni-Rig. - Improve handling of unexpected rig off line status changes from Omni-Rig. - Add an option to highlight unworked 2-character grid fields rather than 4-character grid squares. - Fix bug that caused unwanted disabling of "Enable Tx" in Fox mode. - Log duplicate contacts in FT8 DXpedition Fox mode. - Regenerate the GFSK Tx waveform if Tx audio frequency is changed. - Fix the behavior of double-clicking on a decoded message with first callsign displayed as an unresolved hash code <...>. - Fix a problem with determining "worked before" status after a band change. - Updates to the WSJT-X 2.1 User Guide. - Fix a production issue with the macOS tool chain that generated broken executables. ------------------------------------------------------------------- Tue Oct 29 08:35:24 UTC 2019 - Walter Fey <dl8fcl@darc.de> - Fix for Tumbleweed - cmake macro is broken again. ------------------------------------------------------------------- Fri Oct 4 08:37:58 UTC 2019 - Walter Fey <dl8fcl@darc.de> - use the fixed cmake macro for Tumbleweed ------------------------------------------------------------------- Tue Jul 16 17:03:14 UTC 2019 - Walter Fey <dl8fcl@darc.de> - Fix for Tumbleweed build ------------------------------------------------------------------- Mon Jul 15 19:28:54 UTC 2019 - Walter Fey <dl8fcl@darc.de> - update to version 2.1.0 * The FT4 protocol, designed for HF contesting * Improved FT8 waveform generation * Low-sidelobe option for waterfall and spectrum display * Improved UDP messaging for inter-program communication * Improved accessibility features * Minor enhancements and bug fixes ------------------------------------------------------------------- Mon Jun 3 18:37:58 UTC 2019 - Walter Fey <dl8fcl@darc.de> - update to version 2.1.0-rc7 bugfix for segfault while reading wsjtx_log.adi during start ------------------------------------------------------------------- Sun Jun 2 19:36:57 UTC 2019 - Walter Fey <dl8fcl@darc.de> - update to version 2.1.0-rc6 IMPORTANT CHANGES TO THE FT4 PROTOCOL *** NOT BACKWARD COMPATIBLE *** - T/R sequence length increased from 6.0 to 7.5 seconds - Symbol rate decreased from 23.4375 to 20.8333 baud - Signal bandwidth decreased from 90 Hz to 80 Hz OTHER FT4 IMPROVEMENTS - Allowable time offsets -1.0 < DT < +1.0 s - Tx4 message with RRR now allowed, except in contest messages - Audio frequency is now sent to PSK Reporter - Add a third decoding pass - Add ordered statistics decoding - Improved sensitivity: threshold S/N is now -17.5 dB - Improved S/N calculation - In FT4 mode, Shift+F11/F12 moves Tx freq by +/- 100 Hz OTHER IMPROVEMENTS - Improvements to accessibility - Updates to the User Guide (not yet complete, however) - New user option: "Calling CQ forces Call 1st" - N1MM Logger+ now uses the standard WSJT-X UDP messages - OK/Cancel buttons on Log QSO window maintain fixed positions - Put EU VHF contest serial numbers into the ADIF SRX and STX fields BUG FIXES - Fix generation of Tx5 message when one callsign is nonstandard - Fix a bug that prevented use on macOS - Fix a bug that caused mode switch from FT4 to FT8 - Fix a bug that caused FT4 to do WSPR-style band hopping - Fix a bug that caused a Fortran bounds error ------------------------------------------------------------------- Sun May 19 20:23:55 UTC 2019 - Walter Fey <dl8fcl@darc.de> - Start with style fusion ------------------------------------------------------------------- Tue Apr 30 20:13:59 UTC 2019 - Walter Fey <dl8fcl@darc.de> - update to version 2.1.0-rc5 rc1 - FT4 mode, a new mode targeted at HF digital contesting - GMSK modulation for FT4 and FT8 - New waterfall option to select between raw sensitivity or a filtered signal representation for best visualization of signal quality rc2 - Better options for QSO flow by clicking Tx# buttons to transmit - A 64-bit package for Windows 64-bit systems - Improved FT4 sync detection speed rc3 - change the new FT4 mode to a synchronous T/R period of 6 seconds rc4 - New "Call Best" button for FT4 mode to select the best reply to a CQ call based on neediness. - Fixed UTC display on FT4 waterfall. rc5 - minor changes ------------------------------------------------------------------- Mon Feb 25 20:44:39 UTC 2019 - Walter Fey <dl8fcl@darc.de> - update to version 2.0.1 - Remove startup message about importance of upgrading to v2.0. - Relax ADIF log file parsing to allow garbage between records and records with no DX callsign - Fix bug that prevented retention of power and comments in Log QSO window - Updates to User Guide - MSK144 frequency defaults to 50.260 in IARU Regions 2 and 3 - Remove hexadecimal RGB values from color-configuration panel - Fix a bounds error by not executing Fox-related code when not in Fox mode - Allow the logQSO dialog to modify "Exch Sent" or "Rcvd" when operating in RTTY or NA VHF Contest mode, and to have any changes flow through to N1MM Logger. - Fix several problems in handling hashed callsigns - More rigorous quality checking of WSPR decodes from the OSD algorithm - Fix bug that prevented recevied signal reports from compound callsigns to be logged - Improved recognition of callsigns with /P or /R suffixes - Do not waste time trying AP decoding of nonstandard callsigns - Make OSD decoding work with WSPR "type 2" messages - Retain in Tx6 message field any CQ messages like "CQ xxxx K1ABC FN42", where xxxx is 1-4 letters or 1-3 digits - Optional key bindings for F1 through F5, especially for contest use - Include grid in Tx1 messages with hashed callsign, for example "<DF2018ARDF> K1ABC FN42" - Better formatting for the files ALL.TXT and ALL_WSPR.TXT - Correct a flaw in validating contest exchange data when logging - Option to always start new decode periods at top of Band Activity window - New command "Erase WSPR hashtable" on the File menu - Improved validation for ARRL RTTY RU and FD exchange fields - UDP Reference applications join a multicast group on all available multicast capable network interfaces - Minor code changes to support Qt versions >=5.10 - Changes to support x64 Windows builds in preparation for Qt v5.12 - Add "ADIF Export ..." to Fox Log's contextual popup menu - Use ARRL-required names for VHF+ bands in exported Cabrillo log - New utility program rigctlcom-wsjtx (from Hamlib) - Remove temporary FT8 working frequencies from default frequency list - UDP protocol's Clear (3) message is made two-way, for better communication with DX Lab Suite applications - Reset QSO start time when aborting a QSO or clearing messages by ESC or F4 - Correct a logging issue in Fox's ADIF log when Fox sends RR73 to more than one Hound in the same Tx sequence. ------------------------------------------------------------------- Wed Feb 13 23:43:37 UTC 2019 - dl8fcl@darc.de - build requirements fixed ------------------------------------------------------------------- Sun Dec 30 09:50:13 UTC 2018 - dl8fcl@darc.de - patch to not build/install redundant binaries with hamlib found at fedorainfracloud.org from Richard Shaw(hobbes1069) ------------------------------------------------------------------- Mon Dec 10 20:59:52 UTC 2018 - dl8fcl@darc.de - update to version 2.0.0 for the new features and enhancements check http://www.physics.princeton.edu/pulsar/K1JT/wsjtx.html Replace deprecated/removed cmake command patch removed ------------------------------------------------------------------- Tue Nov 20 22:18:53 UTC 2018 - dl8fcl@darc.de - a tag added, to show on pskreporter who is using this version ------------------------------------------------------------------- Mon Jun 18 14:07:07 UTC 2018 - dl8fcl@darc.de - fix for Tumbleweed. Replace deprecated/removed cmake command ------------------------------------------------------------------- Wed May 30 06:23:36 UTC 2018 - dl8fcl@darc.de - update to version 1.9.1 bugfix release ------------------------------------------------------------------- Sun May 27 07:17:27 UTC 2018 - dl8fcl@darc.de - update to version 1.9.0 New FT8 DXpedition Mode to facilitate high QSO rates in pileup situations A lot of other improvements and bug fixes ------------------------------------------------------------------- Sat Oct 28 23:39:10 UTC 2017 - dl8fcl@darc.de - update to version 1.8.0 ------------------------------------------------------------------- Mon Dec 19 22:39:35 UTC 2016 - dl8fcl@t-online.de - update to the latest 1.7.1 svn version ------------------------------------------------------------------- Mon Nov 23 19:35:22 UTC 2015 - dl8fcl@t-online.de - update to the latest 1.7.0 svn version ------------------------------------------------------------------- Mon Jul 6 05:24:01 UTC 2015 - dl8fcl@darc.de - update to the latest 1.6.1 svn version ------------------------------------------------------------------- Sat Nov 8 11:14:12 UTC 2014 - dl8fcl@darc.de - import into buildservice
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
