Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
home:favogt:symbolictw
sdparm
sdparm.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File sdparm.changes of Package sdparm
------------------------------------------------------------------- Mon Sep 5 15:07:15 UTC 2022 - Ludwig Nussel <lnussel@suse.de> - Use /usr/sbin (boo#1191094) ------------------------------------------------------------------- Thu Jun 24 10:31:19 UTC 2021 - Ferdinand Thiessen <rpm@fthiessen.de> - Update to version 1.12 * add Command duration limits T2A and T2B mpages * add Sequestered command fields in Control extension mpage * SAS/SPL disconnect-reconnect mpage: BILUNIT and CTLUNIT fields added (21-021r3) * vpd: SCSI Feature Sets [0x92]: add ZBC feature sets * add SAT ATA Feature control mpage (20-085r4) * block device char vpd page: add zoned strings * expand Out of band management control mpage (spl5r08) * vpd: add Format presets and Concurrent positioning ranges pages * vpd: standard inquiry: add hot_pluggable field * sg_lib: allows access to cache mpage's WCE for nvme - Update to version 1.11 * Allow ZBC mode pages to use existing SBC mpages as permitted by zbc2r04 chapter 6.4.1 table 70 * add --out_mask=OM option for mode page control bitmask (current, changeable, default and/or saveable) * add --examine option to iterate over mode+vpd pages * add Out of band management control mpage (spl5r01) * expand SAS configure port mode page [0x19,0x2] with configure port mode fields (spl5r07) * accept additional transport acronyms (e.g. ib for srp) * power condition mpage: rename fields IDLE->IDLE_A; STANDBY->STANDBY_Z; ICT->IACT and SCT->SZCT * device configuration extension mpage: expand PEWS field with added PE_UN (PEWS units) field (ssc5r05) * add Zoned block device control mpage (zbc2r04a) * --defaults option can be used twice: reverts all pages to their defaults (new in spc5r11, RTD bit) * vpd: decode TransportIDs in SCSI port page * command=capacity with --long force read capacity(16) with full reporting of response * --wscan option: expand bus type to include NVMe * mode page output with -HHH suitable for --inhex= * add flexible geometery page (obsolete) sbc2r00 * point svn:externals to rev 843 of sg3_utils [v 1.45] * update BSD license from 3 to 2 clause aka FreeBSD license (without reference to FreeBSD project) ------------------------------------------------------------------- Wed Aug 24 17:49:33 UTC 2016 - alexander_naumov@opensuse.org - Update to version 1.10 * add --inhex=FN option for decoding without device present, FN is interpreted as response to mode sense(10) command * add --raw option to interpret FN as binary (def: ASCII hex) * add --pdt=PDT option for use with --inhex=FN * --quiet used twice hides changeable, default + saved * add IO advice hints grouping mode page (sbc4r06, 8) * add Unit serial number VPD page specific sanity check * add NO_PI_CHK to Supported block lengths and protection types VPD page * add Background operation control mpage (sbc4r07) * Read-write error recovery mpage: add Misaligned writes reporting field (MWR) * sync tape mpages with ssc5r02 * add Block limits extension VPD page * add Device constituents VPD page * add LB protection VPD page (ssc5r02a) * LB provisioning VPD page: expand LBPRZ, add Minimum and Threshold percentage fields * device identification VPD page: add decoding for locally assigned UUIDs (spc5r08) * the --inhex=FN option together with --inquiry decodes FN as a single VPD page * improve lto5 and lto6 vendor mpage support * sync to spc5r08 and sbc4r10 * add SAS G5 (22.5 Gbps) settings (spl4r06) * point svn:externals to rev 663 of sg3_utils * upgrade automake to version 1.15 (U15.10) * autogen.sh: upgrade to buildconf 20091223 version ------------------------------------------------------------------- Sun Dec 28 15:04:12 UTC 2014 - p.drouand@gmail.com - Update to version 1.09 + decode Third Party Copy VPD page + Supported block lengths and protection types (sbc4r01) + Block device characteristics extension VPD pages added + zoned block device characterics VPD page added (zbc-r01c) + fix manufacturer-assigned serial number VPD page length + device id VPD: T10 vendor identification designator clean up + block device characteristics VPD: add ZONED (sbc4r04) + SAS/SPL disconnect-reconnect mpage: expand + SAS protocol specific port mpage: add MAXR field (spl4r01) + standard inquiry response (sinq): add LU_CONG + change ibm vendor code to lto5 and lto6 + point svn:externals to rev 620 of sg3_utils + upgrade automake to version 1.14.1 + configure: add --disable-libsgutils so build bypasses that library if present + win32: some --wscan and compile fixes ------------------------------------------------------------------- Wed Oct 23 15:33:48 UTC 2013 - p.drouand@gmail.com - Remove %fillup_prereq and %insserv_prereq; package doesn't provide any sysvinit script ------------------------------------------------------------------- Thu Jun 13 13:56:56 UTC 2013 - jengelh@inai.de - Update to new upstream release 1.08 * New utilities: scsi_ch_swp, sas_disk_blink * Tracked changes at t10.org since January 2012: * device id VPD: add protocol specific port identifier * control extension mpage: add max sense data length * power condition mpage: FIDCPC->CCF_IDLE, FSBCPC->CCF_STAND, FSTCPC->CCF_STOPP (spc4r34+) * caching mpage: add SYNC_PROG field (sbc3r33) * block device characteristics VPD page additions sbc3r34 * extended inquiry vpd page: add max supported sense data length * protocol-specific port information VPD page for SAS SSP, persistent connection (spl3r2), power disable (spl3r3) * allow --readonly with --set= and --clear= * add placeholder for third party copy VPD page * supply more information if a UA occurs - Normalized install procedure - Build with libsgutils support ------------------------------------------------------------------- Sun Apr 22 11:46:53 UTC 2012 - puzel@suse.com - Update to version 1.07 - LB provisioning + Block limits VPD pages to sbc3r27 - Enhanced phy control page: optical mode enabled (spl-r07) - Phy control and discover page: sync to spl2r02 - sync with spc4r31+32 (handle status good with sense) - extented inquiry VPD: add POA_SUP, HRA_SUP and VSA_SUP - application tag mode page subcode 0xf0->0x2 (sbc3r28) - add 'sinq' pseudo VPD page for standard inquiry response - add power consumption mode and VPD pages (spc4r33) - point out some mode page numbers are vendor specific ------------------------------------------------------------------- Tue May 24 17:31:45 CEST 2011 - dimstar@opensuse.org - Update to version 1.06: + allow upper and lower case in field, (mode and vpd) page, vendor, transport or command matching + control mode page: add ATMPE and RWWP fields (spc4r27) + extended inquiry vpd page: add extended self test completion minutes field (spc4r27) + power control mode page: PM_BG_PRECEDENCE field (spc4r24) - FIDCPC, FSBCPC, FSTCPC fields (spc4r25) + sbc3r25 renames 'thin' provisioning' to 'logical block provisioning'; changes mode+vpd page and field names - add Application tag mode page - add SITPUA bit to logical block provisioning mode page + fix '-eal' problem with vendor pages + point svn:externals to rev 334 of sg3_utils ------------------------------------------------------------------- Fri Aug 13 11:56:39 CEST 2010 - dimstar@opensuse.org - Update to version 1.05: + add '--readonly' option especially for '-C start' and '-C stop' on ATA disks. + Control mode page updates (spc4r23) + add Control data protection mode page (ssc4r01) + block device characteristics VPD page: decode form factor + extended inquiry VPD page: activate_microcode+r_sup (spc4r23) + Automation device serial number and Data transfer device element address VPD pages (ssc4r01) + add SBC Referrals VPD page (sbc3r22) + expand SBC Thin provisioning VPD page (sbc3r22) + expand SBC Block limits VPD page (sbc3r22) + SAS-2.1 specification split, upper layers placed in SPL - add enable_slumber and enable_partial fields to Enhanced phy control mode page + add AM_MAINTAINER_MODE to configure.ac to lessen build issues + build infrastructure change to use libsgutils2 if available - Changes from version 1.04: + add SAT ATA Power condition mode page (sat2r06) + add SBC Thin provisioning mode page (sbc3r20) + add SBC Thin provisioning VPD page (sbc3r20) + sync with spc4r21 + add Power condition, update extended inquiry VPD pages + smc3: add Device capabilities + Extended device capabilities + Transport geometry parameters mode pages + prepare for Thin provisioning VPD and mode pages + expand block limits VPD page + update Power condition mode page + rename SAS-2 phy mode page to Enhanced phy control (SAS) + add ADC mode (sub)page place holders + print mode page descriptors in full in more contexts + add linux bsg support + scripts/sas_disk_blink: moved here from sg3_utils package + rework the '-w' option (win32) per sg_scan in sg3_utils + change SDPARM_* constants to SG_LIB_* + remove sdparm.html, refer to its url in sdparm.8 + sdparm.spec: correction to configure call ------------------------------------------------------------------- Tue Aug 12 18:40:54 CEST 2008 - garloff@suse.de - Update to sdparm-1.03: * supports more than one device on command linx * speed[=val] and profile commands for MMC * Extended Inquiry VPD page updated (spc4r15) * SAS protocol-specific port mpage (add CAWT, RTOL) * minor cleanups ------------------------------------------------------------------- Fri May 23 10:11:29 CEST 2008 - hare@suse.de - Using 'Provides' keyword to clean update dependency. ------------------------------------------------------------------- Thu Apr 24 14:51:23 CEST 2008 - hare@suse.de - Split off from the original scsi package.
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
