File flashrom.spec of Package flashrom

# spec file for package flashrom
# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany.
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via

Name:           flashrom
Summary:        A universal flash programming utility
License:        GPL-2.0
Group:          Development/Tools/Other
Version:        0.9.7
Release:        0
BuildRoot:      %{_tmppath}/%{name}-%{version}-build
BuildRequires:  libftdi1
BuildRequires:  libftdi1-devel
BuildRequires:  pciutils-devel
BuildRequires:  zlib-devel
%if 0%{?suse_version} <= 1110
Requires:       pmtools
Requires:       dmidecode
ExclusiveArch:  %ix86 x86_64

flashrom is a utility for reading, writing, verifying and erasing flash ROM
chips. It's often used to flash BIOS/EFI/coreboot/firmware images in-system
using a supported mainboard, but it also supports flashing of network
cards (NICs), SATA controller cards, and other external devices which can
program flash chips.

It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, and
TSOP40 chips, which use various protocols such as LPC, FWH, parallel flash,
or SPI.

%setup -q

make %{?_smp_mflags} \
        CFLAGS="%{optflags}" \
#gzip flashrom.8


mkdir -p %{buildroot}/%{_sbindir}
mkdir -p %{buildroot}/%{_mandir}/man8
install -m 0755 flashrom %{buildroot}/%{_sbindir}
install -m 0644 flashrom.8 %{buildroot}/%{_mandir}/man8


openSUSE Build Service is sponsored by