File xz.spec of Package xz
#
# spec file for package xz
#
# Copyright (c) 2015 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
# avoid bootstrapping problem
%define _binary_payload w9.bzdio
%if 0%{?centos_version} || 0%{?rhel_version}
%if 0%{?centos_version} <= 600 || 0%{?rhel_version <= 600}
%bcond_without static_libs
%endif
%else
%bcond_with static_libs
%endif
%if 0%{?suse_version} < 1130
%define do_profiling 0
%endif
%ifarch aarch64 %{arm} %{sparc}
%define do_profiling 0
%endif
Name: xz
Version: 5.2.1
Release: 95.2
Summary: A Program for Compressing Files
License: LGPL-2.1+ and GPL-2.0+
Group: Productivity/Archiving/Compression
Url: http://tukaani.org/xz/
Source0: http://tukaani.org/xz/%{name}-%{version}.tar.gz
Source1: http://tukaani.org/xz/%{name}-%{version}.tar.gz.sig
Source2: baselibs.conf
# from http://tukaani.org/misc/lasse_collin_pubkey.txt#/xz.keyring
Source3: xz.keyring
BuildRequires: pkgconfig
Provides: lzma = %{version}
Obsoletes: lzma < %{version}
BuildRoot: %{_tmppath}/%{name}-%{version}-build
%if 0%{?lang_package:1} > 0
Recommends: %{name}-lang
%endif
%description
The xz command is a very powerful program for compressing files.
* Average compression ratio of LZMA is about 30% better than that of
gzip, and 15% better than that of bzip2.
* Decompression speed is only little slower than that of gzip, being
two to five times faster than bzip2.
* In fast mode, compresses faster than bzip2 with a comparable
compression ratio.
* Achieving the best compression ratios takes four to even twelve
times longer than with bzip2. However. this doesn't affect
decompressing speed.
* Very similar command line interface to what gzip and bzip2 have.
%{?lang_package}
%package -n liblzma5
Summary: LZMA library
Group: System/Libraries
%description -n liblzma5
Library for encoding/decoding LZMA files.
%package devel
Summary: Development package for the LZMA library
Group: Development/Libraries/C and C++
Requires: liblzma5 = %{version}
Provides: lzma-devel = %{version}
Obsoletes: lzma-devel < %{version}
Provides: lzma-alpha-devel = %{version}
Obsoletes: lzma-alpha-devel < %{version}
%description devel
This package contains the header files and libraries needed for
compiling programs using the LZMA library.
%if %{with static_libs}
%package static-devel
Summary: Static version of LZMA library
Group: Development/Libraries/C and C++
Requires: lzma-devel = %{version}
%description static-devel
Static library for the LZMA library
%endif
%prep
%setup -q
%build
%global optflags %{optflags} -D_REENTRANT -pipe -fPIE
export LDFLAGS="-Wl,-z,relro,-z,now -pie"
%configure \
%if ! %{with static_libs}
--disable-static \
%endif
--with-pic \
--docdir=%{_docdir}/%{name}
%if %{do_profiling}
profiledir=$(mktemp -d)
trap "rm -rf $profiledir" EXIT
make %{?_smp_mflags} CFLAGS="%{optflags} %{cflags_profile_generate}=$profiledir"
time make check
make clean %{?_smp_mflags}
make %{?_smp_mflags} CFLAGS="%{optflags} %{cflags_profile_feedback}=$profiledir"
%else
make %{?_smp_mflags}
%endif
%check
time make check
%install
make DESTDIR=%{buildroot} install %{?_smp_mflags}
rm -v %{buildroot}%{_libdir}/liblzma.la
%find_lang %{name}
%post -n liblzma5 -p /sbin/ldconfig
%postun -n liblzma5 -p /sbin/ldconfig
%if 0%{?lang_package:1} > 0
%files lang -f %{name}.lang
%defattr(-, root, root)
%files
%defattr(-,root,root)
%else
%files -f %{name}.lang
%defattr(-, root, root)
%endif
%defattr(-, root, root)
%{_docdir}/%{name}
%{_bindir}/*
%{_mandir}/man?/*
%files -n liblzma5
%defattr(-, root, root)
%{_libdir}/lib*.so.5*
%files devel
%defattr(-, root, root)
%{_includedir}/*.h
%{_includedir}/lzma
%{_libdir}/lib*.so
%{_libdir}/pkgconfig/*.pc
%if %{with static_libs}
%files static-devel
%defattr(-, root, root)
%{_libdir}/*.a
%endif
%changelog
* Fri Feb 27 2015 astieger@suse.com
- xz 5.2.1:
* Fixed a compression-ratio regression in fast mode of LZMA1 and
LZMA2.
* Wed Jan 21 2015 rguenther@suse.com
- Avoid running configure twice and using -fprofile-generate or
- fprofile-use for compiling configure tests when profiling.
* Thu Dec 25 2014 andreas.stieger@gmx.de
- xz 5.2.0:
* liblzma:
- Added support for multi-threaded compression
- Made the uses of lzma_allocator const correct.
- Added lzma_block_uncomp_encode() to create uncompressed
.xz Blocks using LZMA2 uncompressed chunks.
- Added support for LZMA_IGNORE_CHECK.
- A few speed optimizations were made.
- Added support for symbol versioning. It is enabled by default
on GNU/Linux, other GNU-based systems, and FreeBSD.
* xz:
- Fixed a race condition in the signal handling
- Multi-threaded decompression can be enabled with the
- -threads (-T) option.
- New command line options in xz: --single-stream,
- -block-size=SIZE, --block-list=SIZES,
- -flush-timeout=TIMEOUT, and --ignore-check.
- xz -lvv now shows the minimum xz version that is required to
decompress the file. Currently it is 5.0.0 for all supported
.xz files except files with empty LZMA2 streams require 5.0.2.
* xzdiff and xzgrep now support .lzo files if lzop is installed.
The .tzo suffix is also recognized as a shorthand for .tar.lzo.
* Thu Dec 25 2014 andreas.stieger@gmx.de
- xz 5.0.8:
* Fixed an old bug in xzgrep that affected OpenBSD and probably
a few other operating systems too.
* Updated French and German translations.
* Minor build system update
* Fri Dec 19 2014 meissner@suse.com
- build with PIE support.
* Thu Dec 18 2014 crrodriguez@opensuse.org
- Build XZ with full RELRO.
* Tue Sep 23 2014 andreas.stieger@gmx.de
- xz 5.0.7:
* Fix regressions introduced in 5.0.6:
- Fix building with non-GNU make.
- Fix invalid Libs.private value in liblzma.pc which broke
static linking against liblzma if the linker flags were
taken from pkg-config.
- include changes from 5.0.6:
* xzgrep now exits with status 0 if at least one file matched.
* A few minor portability and build system fixes
* Sun Nov 24 2013 andreas.stieger@gmx.de
- add optional -static-devel library package, intended to publish pixz for
CentOS / RHEL, default off
* Wed Oct 16 2013 mvyskocil@suse.com
- Use gzipped archive to prevent a build cycle on older targets
* http://lists.opensuse.org/opensuse-buildservice/2013-10/msg00079.html
- Add a signature and keyring file for source verification
* not enable in spec due bootstrapping issues
* Tue Jul 16 2013 idonmez@suse.com
- Update to version 5.0.5
* lzmadec and liblzma's lzma_alone_decoder(): Support decompressing
.lzma files that have less common settings in the headers
(dictionary size other than 2^n or 2^n + 2^(n-1), or uncompressed
size greater than 256 GiB).
* xz:
- Fixes and improvements to error handling.
- Various fixes to the man page.
* xzless: Fixed to work with "less" versions 448 and later
* xzgrep: Made -h an alias for --no-filename.
* Tue Jan 29 2013 guillaume@opensuse.org
- Disable profiling for aarch64 arch
* Tue Nov 27 2012 sweet_f_a@gmx.de
- Update to version 5.0.4
* liblzma:
- Fix lzma_index_init(). It could crash if memory allocation
failed.
- Fix the possibility of an incorrect LZMA_BUF_ERROR when a BCJ
filter is used and the application only provides exactly as
much output space as is the uncompressed size of the file.
- Fix a bug in doc/examples_old/xz_pipe_decompress.c. It didn't
check if the last call to lzma_code() really returned
LZMA_STREAM_END, which made the program think that truncated
files are valid.
- New example programs in doc/examples (old programs are now in
doc/examples_old). These have more comments and more detailed
error handling.
* Fix "xz -lvv foo.xz". It could crash on some corrupted files.
* Fix output of "xz --robot -lv" and "xz --robot -lvv" which
incorrectly printed the filename also in the "foo (x/x)" format.
* Fix exit status of "xzdiff foo.xz bar.xz".
* Fix exit status of "xzgrep foo binary_file".
* Fix portability to EBCDIC systems.
* Fix a configure issue on AIX with the XL C compiler. See INSTALL
for details.
* Update French, German, Italian, and Polish translations
* Sun Jul 29 2012 jengelh@inai.de
- Disable profiling on SPARC due to compiler bug [gcc #54121]
* Fri Jul 6 2012 sweet_f_a@gmx.de
- correct license "LGPL-2.1+ and GPL-2.0+" (bnc#770195)
* Sun Feb 12 2012 crrodriguez@opensuse.org
- Put libraries back in %%{_libdir}, /usr merge project.
* Sun Oct 9 2011 sweet_f_a@gmx.de
- rewrite last broken arm portability changes
* Fri Sep 30 2011 crrodriguez@opensuse.org
- Fix build in armv5el doesnt like profiling
* Tue Sep 27 2011 sweet_f_a@gmx.de
- minor fixes of last portability changes:
* decouple do_profiling and lang_package again
* don't define do_factory, just use lang_package instead
* simplify files section
* do_profiling for some more systems
* Mon Sep 26 2011 coolo@suse.com
- build on SLE_10
* Sat Sep 17 2011 coolo@suse.com
- remove _service, too fragile
* Fri Sep 16 2011 jengelh@medozas.de
- Add xz-devel to baselibs
- Remove redundant sections
* Tue Jun 14 2011 dmueller@suse.de
- add recommends xz-lang
* Wed Jun 8 2011 coolo@novell.com
- Update to version 5.0.3
* liblzma fixes:
- A memory leak was fixed.
- lzma_stream_buffer_encode() no longer creates an empty .xz
Block if encoding an empty buffer. Such an empty Block with
LZMA2 data would trigger a bug in 5.0.1 and older (see the
first bullet point in 5.0.2 notes). When releasing 5.0.2,
I thought that no encoder creates this kind of files but
I was wrong.
- Validate function arguments better in a few functions. Most
importantly, specifying an unsupported integrity check to
lzma_stream_buffer_encode() no longer creates a corrupt .xz
file. Probably no application tries to do that, so this
shouldn't be a big problem in practice.
- Document that lzma_block_buffer_encode(),
lzma_easy_buffer_encode(), lzma_stream_encoder(), and
lzma_stream_buffer_encode() may return LZMA_UNSUPPORTED_CHECK.
- The return values of the _memusage() functions are now
documented better.
* Fix command name detection in xzgrep. xzegrep and xzfgrep now
correctly use egrep and fgrep instead of grep.
* French translation was added.
* Thu Apr 7 2011 crrodriguez@opensuse.org
- Update to version 5.0.2
* LZMA2 decompressor now correctly accepts LZMA2 streams with no
uncompressed data. Previously it considered them corrupt. The
bug can affect applications that use raw LZMA2 streams. It is
very unlikely to affect .xz files because no compressor creates
.xz files with empty LZMA2 streams. (Empty .xz files are a
different thing than empty LZMA2 streams.)
* "xz --suffix=.foo filename.foo" now refuses to compress the
file due to it already having the suffix .foo. It was already
documented on the man page, but the code lacked the test.
* "xzgrep -l foo bar.xz" works now.
* Polish translation was added.
* Fri Mar 4 2011 crrodriguez@opensuse.org
- Update to version 5.0.1
* Fix --force on setuid/setgid/sticky and multi-hardlink files.
* Add alloc_size and malloc attributes to a few functions.
* Fix gzip and bzip2 support in xzdiff
* Tue Dec 7 2010 cristian.rodriguez@opensuse.org
- Use compiler profile information, makes xz marginally faster
(around 1-2 secs)
* Sat Oct 30 2010 jengelh@medozas.de
- Use %%_smp_mflags
* Thu Oct 28 2010 coolo@novell.com
- adapt baselibs.conf
* Wed Oct 27 2010 cristian.rodriguez@opensuse.org
- Update to 5.0.0 final
* The major soname has been bumped to 5.0.0. liblzma API and ABI
are now stable.
* The memory usage limit is now disabled by default
* Added support for XZ_DEFAULTS environment variable
* The compression settings associated with the preset levels
have been changed,they are now less likely to make compression worse.
* Support for "xz --list" was added
* Sat Apr 24 2010 coolo@novell.com
- buildrequire pkg-config to fix provides
* Sat Dec 12 2009 jengelh@medozas.de
- add baselibs.conf as a source
* Fri Sep 4 2009 coolo@novell.com
- update to 4.999.9beta
* only some polishment above the git snapshot I took
* Sun Aug 23 2009 coolo@novell.com
- borrow %%check section from fedora spec
* Thu Aug 20 2009 coolo@novell.com
- update to latest git (5.0 still not released)
* a xz man page (bnc#505969)
* fix data corruption in LZ/LZMA2 encoder.
* major documentation update
* install lzdiff, lzgrep, and lzmore as symlinks
* make the default memory usage limit 40 %% of RAM for both
compressing and decompressing.
* fixed a crash in liblzma
See git://ctrl.tukaani.org/xz.git for more
* Sun Jun 7 2009 crrodriguez@suse.de
- remove static libraries, see bnc#509945 for details
* Sun Feb 22 2009 ro@suse.de
- added baselibs.conf (for rpm-32bit)
* Mon Feb 16 2009 coolo@suse.de
- use bzip payload, so users are able to install new rpm on old systems
* Wed Feb 11 2009 coolo@suse.de
- fix devel symlink
* Fri Feb 6 2009 schwab@suse.de
- Update to xz-4.999.8beta.
See git://ctrl.tukaani.org/lzma-utils.git.
* Wed Jan 7 2009 schwab@suse.de
- Update to xz-4.999.7beta.
See git://ctrl.tukaani.org/lzma-utils.git.
- Rename to xz.
* Wed Jul 30 2008 schwab@suse.de
- Update to lzma-4.32.7.
* If "lzma -t" is run on a corrupt file or interrupted by a signal,
don't unlink /dev/null.
* Partial fix to race conditions where a signal could make lzma to
unlink both the source and destination files. Now it cannot lose
data anymore, but with bad luck an incomplete file may be left
on the disk.
* Wed May 14 2008 schwab@suse.de
- Update to lzma-4.32.6.
* Always use 32-bit integer to hold probability variables. Earlier,
these were 64-bit on 64-bit architectures, which hurt cache
efficiency in the CPU, and thus performance of LZMA. 32-bit
architectures are not affected by this change.
* Fix a theoretical data corruption bug in the LZMA encoder. It is
about overflowing a 32-bit integer, whose typical value stays below
five. I don't know if it is actually possible to construct to a file
that could make it overflow. Even if it were possible, it would "only"
make the output file corrupt so that it is 4 GiB too small; there
are no other security risks. Now the integer is 64-bit to be sure
it won't overflow.
* Add support for copying timestamps on operating systems that support
setting timestamps only by filename, not by file descriptor.
* Several portability fixes were made.
* Fri May 9 2008 schwab@suse.de
- Revert last changes.
* Tue May 6 2008 bk@suse.de
- ci removed #neededforbuild while mbuild converts to BuildRequires
- bzip2 source to save space (not lzma, so it can be built in <11.0)
* Tue May 6 2008 bk@suse.de
- run the package-provided self-test by adding a call to 'make check'
- use %%configure instead of equivalent configure call with options
- improved to allow building in SLES and non-SUSE repositories, eg:
- replace obsolete nostatic patch with check for static objects
- use more generic wildcards in the file list for manual pages
* Mon Feb 4 2008 schwab@suse.de
- Fix installation.
* Mon Feb 4 2008 schwab@suse.de
- Update to lzma-4.32.5.
* The percentage shown when --verbose is used, works again. Also some
typos were fixed from the messages printed by --verbose.
* Several small portability fixes were made.
* Fri Jan 4 2008 crrodriguez@suse.de
- Version 4.32.4
* Ignore command line switch --format=alone. This way current scripts
can be written so that they will produce LZMA_Alone format files
even with the new command line tool once it is finishes along with
liblzma.
* The command line tool now tells if the user tries to decode files
in the new .lzma format. The message recommends upgrading to newer
LZMA Utils.
* Added some internal consistency checks to liblzmadec, so that it
doesn't crash if given lzmadec_stream whose initialization failed.
Some applications using zlib and libbzip2 don't check if
initialization was successful, and expect that error gets caught
safely later.
- disable static libraries
- remove liblzmadec.la that has empty dependency_libs
- do not link utils statically
* Mon Dec 3 2007 dmueller@suse.de
- update to 4.32.3:
* rare file content loss bugs fixed (did not check for error upon close())
* permissions copying fixed
- testsuited switched partially to GPLv3
- fix library package name
* Thu Oct 11 2007 schwab@suse.de
- Fix missing include.
* Wed Oct 10 2007 schwab@suse.de
- Initial version 4.32.0beta5.
