File pcsc-acsccid.changes of Package pcsc-acsccid

Overview Repositories Revisions Requests Users Attributes Meta

File pcsc-acsccid.changes of Package pcsc-acsccid

-------------------------------------------------------------------
Wed Mar 27 09:23:03 UTC 2024 - Godfrey Chung <godfrey.chung@acs.com.hk>

- Updated to version 1.1.11.
  * Add the following readers support:
    WalletMate II 1S CL Reader
    WalletMate II V2 Upgrade
    ACR1555 1S CL Reader
    ACR1555 USB FW_Upgrade
  * Enable WalletMate II (composite device) as multi-slot reader.
  * Enable the 2nd interface of WalletMate II as SAM slot.
  * Enable ACR1555U (composite device) as multi-slot reader.
  * Enable the 2nd interface of ACR1555U as SAM slot.
- Replaced acsccid-1.1.10-polling-thread.patch with
  acsccid-1.1.11-polling-thread.patch.
- Replaced acsccid-1.1.10-polling-unplug.patch with
  acsccid-1.1.11-polling-unplug.patch.

-------------------------------------------------------------------
Fri Aug  4 04:25:01 UTC 2023 - Godfrey Chung <godfrey.chung@acs.com.hk>

- Updated to version 1.1.10.
  * Add the following readers support:
    ACR40U ICC Reader
    SCR FW_Upgrade
    ACR1552 1S CL Reader
    ACR1552 CL Reader
    ACR1552 USB FW_Upgrade
  * Enable ACR1552U-M1 (composite device) as multi-slot reader.
  * Enable the 2nd interface of ACR1552U-M1 as SAM slot.
  * Fix missing initialization in get_end_points().
  * Update _usbDevice.has_interrupt in get_end_points().
  * Initialize multislot for interrupt endpoint only in OpenUSBByName().
  * Simplify the code for delaying the write operation.
  * Allow ACR38 or the reader which needs write delay in WriteUSB().
  * Check the packet size to avoid infinite loop in WriteUSB().
  * Use #pragma pack(1) for all platforms in src/ifdhandler.c.
- Replaced acsccid-1.1.9-libhal.patch with acsccid-1.1.10-libhal.patch.
- Replaced acsccid-1.1.9-polling-thread.patch with
  acsccid-1.1.10-polling-thread.patch.
- Replaced acsccid-1.1.9-polling-unplug.patch with
  acsccid-1.1.10-polling-unplug.patch.
- Replaced acsccid-1.1.9-libusb-1.0.8.patch with
  acsccid-1.1.10-libusb-1.0.8.patch.

-------------------------------------------------------------------
Fri Mar 24 02:52:13 UTC 2023 - Godfrey Chung <godfrey.chung@acs.com.hk>

- Updated to version 1.1.9.
  * Add the following readers support:
    APG8201-B2RO
    ACR39U-W1 Top Reader
    ACR39U-W1 Edge Reader
    WalletMate 1S CL Reader
    WalletMate USB FW_Upgrade
    ACR1581 1S Dual Reader
    ACR1581 USB FW_Upgrade
    ACR40T ICC Reader
    ACR40 FW_Upgrade
    ACR39 FW_Upgrade
  * Fix misleading read length in CCID_Receive().
  * Fix ACR1281U-C1 communication issue with NXP SAM AV3.
- Replaced acsccid-1.1.5-libhal.patch with acsccid-1.1.9-libhal.patch.
- Replaced acsccid-1.1.5-polling-thread.patch with
  acsccid-1.1.9-polling-thread.patch.
- Replaced acsccid-1.1.6-polling-unplug.patch with
  acsccid-1.1.9-polling-unplug.patch.
- Replaced acsccid-1.1.5-libusb-1.0.8.patch with
  acsccid-1.1.9-libusb-1.0.8.patch.
- Enabled paralled make.
- Replaced makeinstall macro with the expanded version.
- Removed clean section.
- Marked license files.
- Replaced RPM_BUILD_ROOT with buildroot.

-------------------------------------------------------------------
Mon Feb  3 15:19:20 UTC 2020 - Dominique Leuenberger <dimstar@opensuse.org>

- BuildRequire pkgconfig(udev) instead of udev: allow OBS to
  shortcut through the -mini flavors.

-------------------------------------------------------------------
Wed Jan  8 09:26:37 UTC 2020 - Godfrey Chung <godfrey.chung@acs.com.hk>

- Updated to version 1.1.8. 
  * Add the following readers support:
    ACR39U-W1 Top ICC Reader
    ACR39U-W1 Edge ICC Reader
    ACR1251T CL Reader
  * Remove response timeout fix for APG8201 and APG8201Z.

-------------------------------------------------------------------
Thu Jul 25 07:16:38 UTC 2019 - Godfrey Chung <godfrey.chung@acs.com.hk>

- Updated to version 1.1.7.
  * Add the following readers support:
    ACR3201 ICC Reader
    CryptoMate EVO
  * Fix APG8201 response timeout issue.
  * Do not build simclist with (unused) file dump option.

-------------------------------------------------------------------
Wed Jan  2 06:12:01 UTC 2019 - godfrey.chung@acs.com.hk

- Added missing devices to Enhances:.
  * ACM1252U-Z2ACE    (VID: 072F, PID: 225B)
  * ACM1252U-Z2ACE BL (VID: 072F, PID: 225C)

-------------------------------------------------------------------
Tue Oct 30 09:07:25 UTC 2018 - godfrey.chung@acs.com.hk

- Updated to version 1.1.6.
  * Add the following readers support:
    ACR1252 CL Reader           (ACM1252U-Z2ACE)
    ACR1252 USB FW_Upgrade v100 (ACM1252U-Z2ACE BL)
  * Enable TLV properties for APG8201-B2 in IFDHControl().
  * Enable TLV properties for APG8201-B2 in process_spe_ppdu().
  * Fix ACR39U T=0 APDU problem in CmdXfrBlockTPDU_T0().
  * Return 6B 80 for supported readers in CCID_Receive().
  * Remove extra_egt() causing problems.
  * Fix undefined symbol yylex.
  * Set the status to absent if SAM reset failed in IFDHPowerICC().
  * Fix libusb config descriptor leak.
  * Fix leaking an allocated bundle in case no matching reader was found.
  * Enable ICC extended APDU for ACR1281U-C1 >= v526.
  * Add IOCTL_SMARTCARD_TOGGLE_CARD_STATE for SAM slot.
- Replaced acsccid-1.1.5-polling-unplug.patch with
  acsccid-1.1.6-polling-unplug.patch.

-------------------------------------------------------------------
Wed Sep 12 09:40:35 UTC 2018 - godfrey.chung@acs.com.hk

- Backported to SLE 11.
  * Set libusb version to 1.0.8.
  * Set pcsc-lite version to 1.4.102.
  * Added acsccid-1.1.5-libhal.patch: Fix the compatibility with libhal.
  * Added acsccid-1.1.5-polling-thread.patch: Add polling thread support for
    slot status.
  * Added acsccid-1.1.5-polling-unplug.patch: Let pcsc-lite delay the polling if
    the reader is unplugged.
  * Added acsccid-1.1.5-libusb-1.0.8.patch: Fix the compatibility with libusb
    1.0.8.

-------------------------------------------------------------------
Wed Oct 25 03:57:55 UTC 2017 - godfrey.chung@acs.com.hk

- Updated to version 1.1.5.
  * Add the following readers support:
    ACR1252IMP 1S CL Reader
    AMR220 Reader
    APG8201-B2
  * Fix ACR39U memory card problem.
  * Rename ACR3901U ICC Reader to ACR3901 ICC Reader.
  * PowerOn: use automatic voltage selection when needed.
  * PowerOn: move from 1.8V to 5V if 1.8V is not supported.
  * PowerOn: always try every possible voltage values.
  * udev rule: allow rule overwrite.

-------------------------------------------------------------------
Fri Dec 16 04:32:29 UTC 2016 - godfrey.chung@acs.com.hk

- Updated to version 1.1.4.

-------------------------------------------------------------------
Thu Jun 23 07:27:59 UTC 2016 - godfrey.chung@acs.com.hk

- Updated to version 1.1.3.

-------------------------------------------------------------------
Fri Feb 19 03:36:40 UTC 2016 - godfrey.chung@acs.com.hk

- Updated to version 1.1.2.

-------------------------------------------------------------------
Fri Nov  6 06:22:00 UTC 2015 - godfrey.chung@acs.com.hk

- Updated to version 1.1.1.

-------------------------------------------------------------------
Mon Dec 15 06:44:45 UTC 2014 - godfrey.chung@acs.com.hk

- Updated to version 1.1.0.

-------------------------------------------------------------------
Thu Jul  3 07:58:55 UTC 2014 - godfrey.chung@acs.com.hk

- Updated to version 1.0.8.

-------------------------------------------------------------------
Tue Jun 17 02:06:55 UTC 2014 - godfrey.chung@acs.com.hk

- Updated to version 1.0.7.

-------------------------------------------------------------------
Wed Apr 23 09:54:35 UTC 2014 - godfrey.chung@acs.com.hk

- Updated to version 1.0.6.

-------------------------------------------------------------------
Thu Sep  5 02:49:25 UTC 2013 - godfrey.chung@acs.com.hk

- Updated to version 1.0.5.

-------------------------------------------------------------------
Thu Oct 18 08:52:59 UTC 2012 - fcrozat@suse.com

- Fix build with new udev rules.d directory location.

-------------------------------------------------------------------
Mon Jun 25 08:37:33 UTC 2012 - godfrey.chung@acs.com.hk

- Updated to version 1.0.4.

-------------------------------------------------------------------
Fri Jan 13 09:37:09 UTC 2012 - godfrey.chung@acs.com.hk

- Updated to version 1.0.3.
- Updated copyright.
- Added USB IDs of readers.
- Removed acsccid-1.0.2-pcscd-autostart.patch.
- Removed pcsc-lite-1_7_3.patch.
- Included ChangeLog from upstream.

-------------------------------------------------------------------
Wed Jun 22 13:11:05 UTC 2011 - wr@rosenauer.org

- fix compatibility with pcsc-lite >= 1.7.3

-------------------------------------------------------------------
Wed Jun 22 03:16:13 UTC 2011 - godfrey.chung@acs.com.hk

- Updated to version 1.0.2 (22/6/2011):
  * Fix non-redistributable reference manual problem.
- Updated Url and Source.

-------------------------------------------------------------------
Fri Apr 29 04:00:51 UTC 2011 - godfrey.chung@acs.com.hk

- Created package.
- Based on pcsc-ccid.spec.

Places

File pcsc-acsccid.changes of Package pcsc-acsccid

Places