openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File bind.changes of Package bind (Revision 76ca92449759e2dea67a87669786f8fa)

Currently displaying revision 76ca92449759e2dea67a87669786f8fa , Show latest

-------------------------------------------------------------------
Wed Mar 15 16:13:44 UTC 2023 - Jorik Cronenberg <jorik.cronenberg@suse.com>

- Update to release 9.18.13
  New Features:
  * RPZ updates are now run on specialized “offload” threads to
    reduce the amount of time they block query processing on the
    main networking threads. This increases the responsiveness of
    named when RPZ updates are being applied after an RPZ zone has
    been successfully transferred.

Feature Changes:
  * Catalog zone updates are now run on specialized “offload”
    threads to reduce the amount of time they block query
    processing on the main networking threads. This increases the
    responsiveness of named when catalog zone updates are being
    applied after a catalog zone has been successfully transferred.
  * libuv support for receiving multiple UDP messages in a single
    recvmmsg() system call has been tweaked several times between
    libuv versions 1.35.0 and 1.40.0; the current recommended libuv
    version is 1.40.0 or higher. New rules are now in effect for
    running with a different version of libuv than the one used at
    compilation time. These rules may trigger a fatal error at
    startup:
    - Building against or running with libuv versions 1.35.0 and
      1.36.0 is now a fatal error.
    - Running with libuv version higher than 1.34.2 is now a
      fatal error when named is built against libuv version
      1.34.2 or lower.
    - Running with libuv version higher than 1.39.0 is now a
      fatal error when named is built against libuv version
      1.37.0, 1.38.0, 1.38.1, or 1.39.0.
  * This prevents the use of libuv versions that may trigger an
    assertion failure when receiving multiple UDP messages in a
    single system call.

Bug Fixes:
  * named could crash with an assertion failure when adding a new
    zone into the configuration file for a name which was already
    configured as a member zone for a catalog zone. This has been
    fixed.
  * When named starts up, it sends a query for the DNSSEC key for
    each configured trust anchor to determine whether the key has
    changed. In some unusual cases, the query might depend on a
    zone for which the server is itself authoritative, and would
    have failed if it were sent before the zone was fully loaded.
    This has now been fixed by delaying the key queries until all
    zones have finished loading.

-------------------------------------------------------------------
Thu Feb 16 14:36:14 UTC 2023 - Jorik Cronenberg <jorik.cronenberg@suse.com>

- Update to release 9.18.12
  Removed Features:
  * Specifying a port when configuring source addresses (i.e., as
    an argument to query-source, query-source-v6, transfer-source,
    transfer-source-v6, notify-source, notify-source-v6,
    parental-source, or parental-source-v6, or in the source or
    source-v6 arguments to primaries, parental-agents, also-notify,
    or catalog-zones) has been deprecated. In addition, the
    use-v4-udp-ports, use-v6-udp-ports, avoid-v4-udp-ports, and
    avoid-v6-udp-ports options have also been deprecated.
    Warnings are now logged when any of these options are
    encountered in named.conf. In a future release, they will be
    made nonfunctional.

Bug Fixes:
  * A constant stream of zone additions and deletions via rndc
    reconfig could cause increased memory consumption due to
    delayed cleaning of view memory. This has been fixed. 
  * The speed of the message digest algorithms (MD5, SHA-1, SHA-2),
    and of NSEC3 hashing, has been improved.
  * Pointing parental-agents to a resolver did not work because the
    RD bit was not set on DS requests. This has been fixed. 
  * Building BIND 9 failed when the --enable-dnsrps switch for
    ./configure was used. This has been fixed.

- Updated keyring and signature

-------------------------------------------------------------------
Tue Jan 24 13:39:10 UTC 2023 - Jorik Cronenberg <jorik.cronenberg@suse.com>

- Update to release 9.18.11
  Security Fixes:
  * An UPDATE message flood could cause named to exhaust all
    available memory. This flaw was addressed by adding a new
    update-quota option that controls the maximum number of
    outstanding DNS UPDATE messages that named can hold in a queue
    at any given time (default: 100). (CVE-2022-3094)
  * named could crash with an assertion failure when an RRSIG query
    was received and stale-answer-client-timeout was set to a
    non-zero value. This has been fixed. (CVE-2022-3736)
  * named running as a resolver with the
    stale-answer-client-timeout option set to any value greater
    than 0 could crash with an assertion failure, when the
    recursive-clients soft quota was reached. This has been fixed.
    (CVE-2022-3924)

New Features:
  * The new update-quota option can be used to control the number
    of simultaneous DNS UPDATE messages that can be processed to
    update an authoritative zone on a primary server, or forwarded
    to the primary server by a secondary server. The default is
    100. A new statistics counter has also been added to record
    events when this quota is exceeded, and the version numbers for
    the XML and JSON statistics schemas have been updated.

Removed Features:
  * The Differentiated Services Code Point (DSCP) feature in BIND
    has been non-operational since the new Network Manager was
    introduced in BIND 9.16. It is now marked as obsolete, and
    vestigial code implementing it has been removed. Configuring
    DSCP values in named.conf now causes a warning to be logged.

Feature Changes:
  * The catalog zone implementation has been optimized to work with
    hundreds of thousands of member zones.

Bug Fixes:
  * A rare assertion failure was fixed in outgoing TCP DNS
    connection handling.
  * Large zone transfers over TLS (XoT) could fail. This has been
    fixed.
  * In addition to a previously fixed bug, another similar issue
    was discovered where quotas could be erroneously reached for
    servers, including any configured forwarders, resulting in
    SERVFAIL answers being sent to clients. This has been fixed.
  * In certain query resolution scenarios (e.g. when following
    CNAME records), named configured to answer from stale cache
    could return a SERVFAIL response despite a usable, non-stale
    answer being present in the cache. This has been fixed.
  * When an outgoing request timed out, named would retry up to
    three times with the same server instead of trying the next
    available name server. This has been fixed.
  * Recently used ADB names and ADB entries (IP addresses) could
    get cleaned when ADB was under memory pressure. To mitigate
    this, only actual ADB names and ADB entries are now counted
    (excluding internal memory structures used for “housekeeping”)
    and recently used (<= 10 seconds) ADB names and entries are
    excluded from the overmem memory cleaner.
  * The “Prohibited” Extended DNS Error was inadvertently set in
    some NOERROR responses. This has been fixed.
  * Previously, TLS session resumption could have led to handshake
    failures when client certificates were used for authentication
    (Mutual TLS). This has been fixed.
  [bsc#1207471, bsc#1207473, bsc#1207475]

-------------------------------------------------------------------
Wed Jan  4 16:42:37 UTC 2023 - Thiago Macieira <thiago@kde.org>

- Declare that named.service depends on network-online.target, otherwise named
  may start too early and thus fail (time out) when resolving some
  domains. This happens easily in containers.

-------------------------------------------------------------------
Thu Dec 22 12:36:53 UTC 2022 - Jorik Cronenberg <jorik.cronenberg@suse.com>

- Update to release 9.18.10
  Feature Changes:
  * To reduce unnecessary memory consumption in the cache, NXDOMAIN
    records are no longer retained past the normal negative cache
    TTL, even if stale-cache-enable is set to yes.
  * The auto-dnssec option has been deprecated and will be removed
    in a future BIND 9.19.x release. Please migrate to
    dnssec-policy.
  * The coresize, datasize, files, and stacksize options have been
    deprecated. The limits these options set should be enforced
    externally, either by manual configuration (e.g. using ulimit)
    or via the process supervisor (e.g. systemd).
  * Setting alternate local addresses for inbound zone transfers
    has been deprecated. The relevant options (alt-transfer-source,
    alt-transfer-source-v6, and use-alt-transfer-source) will be
    removed in a future BIND 9.19.x release.
  * The number of HTTP headers allowed in requests sent to named’s
    statistics channel has been increased from 10 to 100, to
    accommodate some browsers that send more than 10 headers by
    default.

Bug Fixes:
  * named could crash due to an assertion failure when an HTTP
    connection to the statistics channel was closed prematurely
    (due to a connection error, shutdown, etc.).
  * When a catalog zone was removed from the configuration, in some
    cases a dangling pointer could cause the named process to
    crash.
  * When a zone was deleted from a server, a key management object
    related to that zone was inadvertently kept in memory and only
    released upon shutdown. This could lead to constantly
    increasing memory use on servers with a high rate of changes
    affecting the set of zones being served.
  * TLS configuration for primary servers was not applied for zones
    that were members of a catalog zone.
  * In certain cases, named waited for the resolution of
    outstanding recursive queries to finish before shutting down.
  * host and nslookup command-line options setting the custom
    TCP/UDP port to use were ignored for ANY queries (which are
    sent over TCP).
  * The zone <name>/<class>: final reference detached log message
    was moved from the INFO log level to the DEBUG(1) log level to
    prevent the named-checkzone tool from superfluously logging
    this message in non-debug mode.

-------------------------------------------------------------------
Mon Nov 21 15:03:35 UTC 2022 - Jorik Cronenberg <jorik.cronenberg@suse.com>

- Update to bind release 9.18.9
  Bug Fixes:
  * A crash was fixed that happened when a dnssec-policy zone that
    used NSEC3 was reconfigured to enable inline-signing.
  * In certain resolution scenarios, quotas could be erroneously
    reached for servers, including any configured forwarders,
    resulting in SERVFAIL answers being sent to clients.
  * rpz-ip rules in response-policy zones could be ineffective in
    some cases if a query had the CD (Checking Disabled) bit set to
    1.
  * Previously, if Internet connectivity issues were experienced
    during the initial startup of named, a BIND resolver with
    dnssec-validation set to auto could enter into a state where it
    would not recover without stopping named, manually deleting the
    managed-keys.bind and managed-keys.bind.jnl files, and starting
    named again.
  * The statistics counter representing the current number of
    clients awaiting recursive resolution results (RecursClients)
    could overflow in certain resolution scenarios.
  * Previously, the port in remote servers such as in primaries and
    parental-agents could be wrongly configured because of an
    inheritance bug.
  * Previously, BIND failed to start on Solaris-based systems with
    hundreds of CPUs.
  * When a DNS resource record’s TTL value was equal to the
    resolver’s configured prefetch “eligibility” value, the record
    was erroneously not treated as eligible for prefetching.

-------------------------------------------------------------------
Mon Nov  7 14:17:22 UTC 2022 - Jorik Cronenberg <jorik.cronenberg@suse.com>

- Update to bind release 9.18.8
  New Features:
  * Support for parsing and validating the dohpath service
    parameter in SVCB records was added.
  * named now logs the supported cryptographic algorithms during
    startup and in the output of named -V.
  * The recursion not available and query (cache) '...' denied log
    messages were extended to include the name of the ACL that
    caused a given query to be denied.

Bug Fixes:
  * An assertion failure was fixed in named that was caused by
    aborting the statistics channel connection while sending
    statistics data to the client.
  * Changing just the TSIG key names for primaries in catalog
    zones’ member zones was not effective. This has been fixed.

Known Issues:
  * Upgrading from BIND 9.16.32, 9.18.6, or any older version may
    require a manual configuration change. The following
    configurations are affected:
    - type primary zones configured with dnssec-policy but without
      either allow-update or update-policy,
    - type secondary zones configured with dnssec-policy.
    In these cases please add inline-signing yes; to the individual
    zone configuration(s). Without applying this change, named will
    fail to start. For more details, see
    https://kb.isc.org/docs/dnssec-policy-requires-dynamic-dns-or-inline-signing
  * BIND 9.18 does not support dynamic update forwarding (see
    allow-update-forwarding) in conjuction with zone transfers over
    TLS (XoT).

This obsoletes the following patch:
  * fix_documentation-Sphinx.patch

-------------------------------------------------------------------
Wed Oct  5 20:01:23 UTC 2022 - Matej Cepl <mcepl@suse.com>

- Add fix_documentation-Sphinx.patch to fix building with the
  current Sphinx
  (https://gitlab.isc.org/isc-projects/bind9/-/issues/3572).
- Reapply bind-ldapdump-use-valid-host.patch

-------------------------------------------------------------------
Wed Sep 21 11:49:07 UTC 2022 - Jorik Cronenberg <jorik.cronenberg@suse.com>

- Update to bind release 9.18.7
  Security Fixes:
  * Previously, there was no limit to the number of database lookups
    performed while processing large delegations, which could be
    abused to severely impact the performance of named running as a
    recursive resolver. This has been fixed. (CVE-2022-2795)
  * When an HTTP connection was reused to request statistics from the
    stats channel, the content length of successive responses could
    grow in size past the end of the allocated buffer.
    This has been fixed. (CVE-2022-2881)
  * Memory leaks in code handling Diffie-Hellman (DH) keys were fixed
    that could be externally triggered, when using TKEY records in DH
    mode with OpenSSL 3.0.0 and later versions. (CVE-2022-2906)
  * named running as a resolver with the stale-answer-client-timeout
    option set to 0 could crash with an assertion failure, when there
    was a stale CNAME in the cache for the incoming query.
    This has been fixed. (CVE-2022-3080)
  * Memory leaks were fixed that could be externally triggered in the
    DNSSEC verification code for the EdDSA algorithm. (CVE-2022-38178)

Feature Changes:
  * Response Rate Limiting (RRL) code now treats all QNAMEs that are
    subject to wildcard processing within a given zone as the same
    name, to prevent circumventing the limits enforced by RRL.
  * Zones using dnssec-policy now require dynamic DNS or
    inline-signing to be configured explicitly.
  * When reconfiguring dnssec-policy from using NSEC with an NSEC-only
    DNSKEY algorithm (e.g. RSASHA1) to a policy that uses NSEC3,
    BIND 9 no longer fails to sign the zone; instead, it keeps using
    NSEC until the offending DNSKEY records have been removed from the
    zone, then switches to using NSEC3.
  * A backward-compatible approach was implemented for encoding
    internationalized domain names (IDN) in dig and converting the
    domain to IDNA2008 form; if that fails, BIND tries an IDNA2003
    conversion.

Bug Fixes:
  * A serve-stale bug was fixed, where BIND would try to return stale
    data from cache for lookups that received duplicate queries or
    queries that would be dropped. This bug resulted in premature
    SERVFAIL responses, and has now been resolved.

This obsoletes the following patch:
  * bind-fix-mysql-bindings.patch
  [bsc#1203614, bsc#1203615, bsc#1203616, bsc#1203618, bsc#1203620]

-------------------------------------------------------------------
Thu Aug 18 14:57:33 UTC 2022 - Jorik Cronenberg <jorik.cronenberg@suse.com>

- Fix typo in contrib/dlz/modules/{mysql,mysqldyn} that references
  LDAP_LIBS instead of MYSQL_LIBS.
  [bsc#1202149, bind.spec, bind-fix-mysql-bindings.patch]

-------------------------------------------------------------------
Thu Aug 18 13:28:24 UTC 2022 - Jorik Cronenberg <jorik.cronenberg@suse.com>

- Update to bind release 9.18.6
  Bug Fixes:
  * When running as a validating resolver forwarding all queries
    to another resolver, named could crash with an assertion failure.
    These crashes occurred when the configured forwarder sent
    a broken DS response and named failed its attempts to find
    a proper one instead. This has been fixed.
  * Non-dynamic zones that inherit dnssec-policy from the view
    or options blocks were not marked as inline-signed
    and therefore never scheduled to be re-signed. This has been fixed.
  * The old max-zone-ttl zone option was meant to be superseded
    by the max-zone-ttl option in dnssec-policy; however,
    the latter option was not fully effective. This has been corrected:
    zones no longer load if they contain TTLs greater than the limit
    configured in dnssec-policy. For zones with both the old
    max-zone-ttl option and dnssec-policy configured,
    the old option is ignored, and a warning is generated.
  * rndc dumpdb -expired was fixed to include expired RRsets,
    even if stale-cache-enable is set to no and the cache-cleaning
    time window has passed.
  For a complete list of changes, see
  * Bind Release Notes
    https://downloads.isc.org/isc/bind9/9.18.6/doc/arm/html/notes.html
  * The CHANGES file in the source RPM
  [bind.spec bind-9.18.6.tar.xz bind-9.18.6.tar.xz.sha512.asc]

-------------------------------------------------------------------
Wed Aug  3 13:14:32 UTC 2022 - Jorik Cronenberg <jorik.cronenberg@suse.com>

- When enabling query_logging by un-commenting an example in
  bind.conf, named attempts to create a file in /var/log which
  fails due to missing credentials. This also applies to the
  "dump-file" and the "statistics-file".
  This is solved by having systemd-tmpfiles create a subdirectory
  "/var/log/named" owned by named:named and changing the file
  paths accordingly:
  /var/log/named_querylog -> /var/log/named/querylog
  /var/log/named_dump.db -> /var/log/named/dump.db
  /var/log/named.stats -> /var/log/named/stats
  Also, in "named.service", the ReadWritePath was changed to
  include "/var/log/named" rather than just "var/log".
  [bsc#1200685, bind.conf, vendor-files/config/named.conf,
   vendor-files/system/named.service]

-------------------------------------------------------------------
Mon Aug  1 11:15:42 UTC 2022 - Jorik Cronenberg <jorik.cronenberg@suse.com>

- Add systemd drop-in directory for named service
  [bsc#1201689, bind.spec]

-------------------------------------------------------------------
Thu Jul 21 06:51:58 UTC 2022 - Josef Möllers <josef.moellers@suse.com>

- Update to bind release 9.18.5
  Bugs fixed:
  * When resolving a name, don't give up immediately if an
    authoritative server returns FORMERR; try the other servers first.
  * When synth-from-dnssec generated a response using records from a
    higher zone, it could unexpectedly prove non-existance of
    records in a subordinate grafted-on namespace.  
  * Update HTTP listener settings on reconfiguration.
  * Fix a crash in dig NS search mode when one of the NS server
    queries fail.
  * Changed dnssec-signzone -H default to 0 additional NSEC3
    iterations.
  * When processing a catalog zone member zone make sure that there
    is no configured pre-existing forward-only forw]ard zone with
    that name.
  [bind-9.18.5.tar.xz bind-9.18.5.tar.xz.sha512.asc]

-------------------------------------------------------------------
Wed Jun 15 12:37:17 UTC 2022 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to 9.18.4:
  Bugs fixed:
  * Only write key files if the dnssec-policy keymgr has
    changed the metadata.
  * When the fetches-per-server quota was adjusted
    because of an authoritative server timing out more
    or less frequently, it was incorrectly set to 1
    rather than the intended value.
  Notable functional changes:
  * Key timing options for `dnssec-keygen` and
    `dnssec-settime` now accept times as printed by
    `dnssec-settime -p`.
  * Key timing options for `dnssec-settime` and related
    utilities now accept "UNSET" times as printed by
    `dnssec-settime -p`.
  This obsoletes the following patch:
  bind-prevent-buffer-overflow.patch
  [bind-9.18.4.tar.xz, bind-9.18.4.tar.xz.sha512.asc,
  bind-prevent-buffer-overflow.patch]

-------------------------------------------------------------------
Thu May 19 07:32:31 UTC 2022 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to 9.18.3:
  Bugs fixed:
  * Fix a crash in DNS-over-HTTPS (DoH) code caused by premature
    TLS stream socket object deletion.
  * RPZ NSIP and NSDNAME rule processing didn't handle stub and
    static-stub zones at or above the query name. This has now
    been addressed.
  * Fixed a deadlock that could occur if an rndc connection arrived
    during the shutdown of network interfaces.
  * Refactor the fctx_done() function to set fctx to NULL after
    detaching, so that reference counting errors will be easier to
    avoid.
  * udp_recv() in dispatch could trigger an INSIST when the
    callback's result indicated success but the response was
    canceled in the meantime.
  * Work around a jemalloc quirk which could trigger an
    out-of-memory condition in named over time.
  * If there was a pending negative cache DS entry, validations
    depending upon it could fail.
  * dig returned a 0 exit status on UDP connection failure.
  * Fix an assertion failure when using dig with +nssearch and
    +tcp options by starting the next query in the send_done()
    callback (like in the UDP mode) instead of doing that
    recursively in start_tcp(). Also ensure that queries
    interrupted while connecting are detached properly.
  * Don't remove CDS/CDNSKEY DELETE records on zone sign when
    using 'auto-dnssec maintain;'.
  This obsoletes the following patch:
  bind-define-local-instances-of-FALLTHROUGH-and-UNREACHABLE.patch
  [CVE-2022-1183, bsc#1199619]

-------------------------------------------------------------------
Tue May 17 12:06:17 UTC 2022 - Josef Möllers <josef.moellers@suse.com>

- An assertion failure can be triggered if a TLS connection to a
  configured http TLS listener with a defined endpoint is destroyed too
  early.
  [CVE-2022-1183, bsc#1199619, CVE-2022-1183.patch]

-------------------------------------------------------------------
Mon May 16 08:14:55 UTC 2022 - Martin Liška <mliska@suse.cz>

- Add upstream patch bind-prevent-buffer-overflow.patch.

-------------------------------------------------------------------
Thu May 12 14:25:28 UTC 2022 - Josef Möllers <josef.moellers@suse.com>

- The named-checkconf had been moved from /usr/sbin to /usr/bin
  but that had not been reflected in scripts that called this,
  eg named.prep. So these scripts failed.
  Some installations still have "createNamedConfInclude" in the
  NAMED_INITIALIZE_SCRIPTS in /etc/sysconfig/named. The named.prep
  will now report this but continue.
  [bsc#1199044, vendor-files.tar.bz2]

-------------------------------------------------------------------
Mon Apr 25 06:56:58 UTC 2022 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to 9.18.2:
  Most important bugs fixed:
  * The "starting maxtime timer" message related to outgoing
    zone transfers was incorrectly logged at the ERROR level
    instead of DEBUG(1).
  * Ensure that zone maintenance queries have a retry limit.
  * When using both the `+qr` and `+y` options `dig` could
    crash if the connection to the first server was not
    successful.
  * dig could hang in some cases involving multiple servers
    in a lookup, when a request fails and the next one
    refuses to start for some reason, for example if it was
    an IPv4 mapped IPv6 address.
  * dig +nssearch was hanging until manually interrupted.
  * When an UPDATE targets a zone that is not configured,
    the requested zone name is now logged in the "not
    authoritative" error message, so that it is easier to
    track down problematic update clients.
  * Quote the dns64 prefix in error messages that complain
    about problems with it, to avoid confusion with the
    following dns64 ACLs.
  * When encountering socket error while trying to initiate
    a TCP connection to a server, dig could hang
    indefinitely, when there were more servers to try.
  * When timing-out or having other types of socket errors
    during a query, dig wasn't trying to perform the lookup
    using other servers, in case they exist.
  * Resending a UDP request in the result of a timeout
    could cause an assertion failure when the resent
    query's result was SERVFAIL.
  * Replace single TCP write timer with per-TCP write
    timers.
  * Invalid dnssec-policy definitions were being accepted
    where the defined keys did not cover both KSK and ZSK
    roles for a given algorithm.  This is now checked for
    and the dnssec-policy is rejected if both roles are
    not present for all algorithms in use.
  * Fix query context management issues in the TCP part
    of dig.

Noteworthy functional changes:
  * Add new "reuseport" option to enable/disable load
    balancing of sockets.
  * Set the minimum MTU on UDPv6 and TCPv6 sockets and
    limit TCP maximum segment size (TCP_MAXSEG) to (1220)
    for both TCPv4 and TCPv6 sockets.
  
  Needed to define two macros in contrib code:
  FALLTHOUGH is a copy of how it is defined in <isc/util.h>

UNREACHABLE follows the model used in MacOS /usr/include/c++/v1/cstdlib
  to determine if __builtin_ureachable is available
  [bind-9.18.2.tar.xz, bind-9.18.2.tar.xz.sha512.asc,
  bind-define-local-instances-of-FALLTHROUGH-and-UNREACHABLE.patch]

-------------------------------------------------------------------
Thu Mar 17 07:28:25 UTC 2022 - Josef Möllers <josef.moellers@suse.com>

- * When using forwarders, bogus NS records supplied by, or via, those
    forwarders may be cached and used by named if it needs to recurse
    for any reason, causing it to obtain and pass on potentially
    incorrect answers. [CVE-2021-25220]
  * TCP connection slots may be consumed for an indefinite time frame
    via a specifically crafted TCP stream sent from a client.
    This issue can only be triggered on BIND servers which have
    keep-response-order enabled, which is not the default configuration.
    The keep-response-order option is an ACL block, and as such, any
    hosts specified within it will be able to trigger this issue on
    affected versions. [CVE-2022-0396]
  * The RFC 8198 Aggressive Use of DNSSEC-Validated Cache feature
    (synth-from-dnssec) had been refactored and the default has been
    changed so that is now automatically enabled for dnssec-validating
    resolvers. Subsequently it was found that repeated patterns of
    specific queries to servers with this feature enabled could cause
    an INSIST failure in query.c:query_dname which causes named to
    terminate unexpectedly.
    The vulnerability affects BIND resolvers running 9.18.0 that have
    both dnssec-validation and synth-from-dnssec enabled. (Note that
    dnssec-validation auto; is the default setting unless configured
    otherwise in named.conf and that enabling dnssec-validation
    automatically enables synth-from-dnssec unless explicitly disabled)
    [CVE-2022-0635]
  * The refactoring of the recursive client code introduced a
    "backstop lifetime timer."
    While BIND is processing a request for a DS record that needs to be
    forwarded, it waits until this processing is complete or until the
    backstop lifetime timer has timed out. When the resume_dslookup() function
    is called as a result of such a timeout, the function does not test
    whether the fetch has previously been shut down. This introduces the
    possibility of triggering an assertion failure, which could cause the BIND
    process to terminate. [CVE-2022-0667]
  * Reset client TCP connection when data received cannot
    be parsed as a valid DNS request.
  For a complete list of changes, see
  * Bind Release Notes
    https://downloads.isc.org/isc/bind9/9.18.1/doc/arm/html/notes.html
  * The CHANGES file in the source RPM
  This obsoletes bind-define-missing-threads.patch
  Also, removed bind-python3 from the spec file as it is not build
  any longer.
  [bind.spec, bind-9.18.1.tar.xz, bind-9.18.1.tar.xz.sha512.asc,
   bind-define-missing-threads.patch]

-------------------------------------------------------------------
Mon Jan 31 13:49:51 UTC 2022 - Josef Möllers <josef.moellers@suse.com>

- Update to new MAJOR VERSION 9.18.0.
  This has many enhnancements, bug fixes and changes.
  The spec file also has mechanisms to run the integrated test suite.

MAJOR CHANGES:
  * Support for securing DNS traffic using Transport Layer Security (TLS).
    TLS is used by both DNS-over-TLS (DoT) and DNS-over-HTTPS (DoH).
  * Support for zone transfers over TLS (XFR-over-TLS, XoT) for both
    incoming and outgoing zone transfers.
  * The dig tool is now able to send DoT queries (+tls option).
  * Support for OpenSSL 3.0 APIs was added.

A number of utilities have been removed: dnssec-checkds,
  dnssec-coverage, dnssec-keymgr, which have been deprecated in
  favor of dnssec-policy feature, as well as python support
  (package python3-bind). 
  A number of utilities have been moved from (/usr)/sbin to (/usr)/bin
  The DLZ modules have been put into seperate sub-packages
  to keep unwanted dependencies out of the main package:
  * bind-modules-perl: dlz_perl_driver.so
  * bind-modules-mysql: dlz_mysql_dynamic.so, dlz_mysqldyn_mod.so
  * bind-modules-ldap: dlz_ldap_dynamic.so
  * bind-modules-bdbhpt: dlz_bdbhpt_dynamic.so
  * bind-modules-sqlite3: dlz_sqlite3_dynamic.so
  * bind-modules-generic: dlz_filesystem_dynamic.so, dlz_wildcard_dynamic.so
  For a complete list of changes, see
  * Bind Release Notes
    https://downloads.isc.org/isc/bind9/9.18.0/doc/arm/html/notes.html
  * The CHANGES file in the source RPM
  [bind.spec, bind-9.18.0.tar.xz, bind-9.18.0.tar.xz.sha512.asc,
   bind-avoid-fallthrough-warning-error.patch,
   bind-contrib-pthread.patch, named-bootconf.diff, bind-define-missing-threads.patch]

-------------------------------------------------------------------
Mon Jan 24 13:18:35 UTC 2022 - Josef Möllers <josef.moellers@suse.com>

- Old-style DLZ drivers have been deprecated in favor of
  DLZ modules. The DLZ drivers configuration option will
  be removed from the next major BIND 9 release.

The option to use the DLZ modules is already available
  in BIND 9; please see the ARM section on DLZ modules.

The dynamically lodable driver modules are stored in
  /usr/lib64/bind-plugins
  Example configurations for ldap and mysql are provided in
  named.conf.
  [bind.spec, vendor-files/config/named.conf]

-------------------------------------------------------------------
Fri Jan 21 16:24:16 UTC 2022 - Callum Farmer <gmbr3@opensuse.org>

- Add now working CONFIG parameter to sysusers generator

-------------------------------------------------------------------
Thu Jan 20 09:48:39 UTC 2022 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to release 9.16.25
  This upgrade fixes the following bugs:
  * Enforce enqueuing TCP resumeread to prevent the next read
    callback from being executed before the current read callback
    has finished, and the worker receive buffer has been marked as
    "freed".
  * Allow replacing expired zone signatures with signatures created
    by the KSK.
  * An assertion could occur if a catalog zone event was scheduled
    while the task manager was being shut down.
  * Defer detaching from zone->raw in zone_shutdown() if the zone
    is in the process of being dumped to disk, to ensure that the
    unsigned serial number information is always written in the
    raw-format header of the signed version on an inline-signed
    zone.
  * named could leak memory when two dnssec-policy clauses had the
    same name. named failed to log this error.
  * Add a missing isc_condition_destroy() for nmsocket condition
    variable and add missing isc_mutex_destroy() for nmworker lock.
  [bind-9.16.25.tar.xz, bind-9.16.25.tar.xz.sha512.asc]

-------------------------------------------------------------------
Wed Jan 19 08:38:11 UTC 2022 - Josef Möllers <josef.moellers@suse.com>

- Added /var/log to the ReadWritePaths as some log files are
  written there:
  * dump-file "/var/log/named_dump.db"
  * statistics-file "/var/log/named.stats"
  [bsc#1194721, vendor-files.tar.bz2]

-------------------------------------------------------------------
Wed Dec 15 14:37:47 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to release 9.16.24
  This upgrade fixes the following bugs:
  * mdig now honors the operating system's preferred ephemeral port
    range.
  * Fix a "named" crash related to removing and restoring a
    `catalog-zone` entry in the configuration file and running
    `rndc reconfig`.
  * dns_sdlz_putrr failed to process some valid resource records.
  * dnssec-dsfromkey failed to omit revoked keys.
  Functional change:
  * Change the message when accepting TCP connection has failed to
    say "Accepting TCP connection failed" and change the log level
    for ISC_R_NOTCONNECTED, ISC_R_QUOTA and ISC_R_SOFTQUOTA results
    codes from ERROR to INFO.
    [bind-9.16.24.tar.xz]

-------------------------------------------------------------------
Fri Dec  3 07:52:38 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to 9.16.23
  Security issues fixed:
  The "lame-ttl" option is now forcibly set to 0. This
  effectively disables the lame server cache, as it could
  previously be abused by an attacker to significantly
  degrade resolver performance. (CVE-2021-25219)

Bugs fixed:
  In 9.16.21:
  * When a dynamic zone was made available in another view
    using the "in-view" statement, running "rndc freeze"
    always reported an "already frozen" error even though
    the zone was successfully frozen.
  * Stale data in the cache could cause named to send
    non-minimized queries despite QNAME minimization being
    enabled.
  * When a DNSSEC-signed zone which only has a single
    signing key available is migrated to use KASP, that key
    is now treated as a Combined Signing Key (CSK).
  * When a member zone was removed from a catalog zone,
    journal files for the former were not deleted.
  * named-checkconf failed to detect syntactically invalid
    values of the "key" and "tls" parameters used to define
    members of remote server lists.
  * Fixed a regression which caused the EDNS TCP Keepalive option to be
    ignored inadvertently in client requests. It has now
    been fixed and this option is handled properly again.
  * Fixed a regression which altered the internal memory structure of
    zone databases, but neglected to update the MAPAPI value
    for zone files in "map" format. This caused named to
    attempt to load incompatible map files, triggering an
    assertion failure on startup. The MAPAPI value has now
    been updated, so named rejects outdated files when
    encountering them.
  * The thread-local isc_tid_v variable was not properly
    initialized when running BIND 9 as a Windows Service,
    leading to a crash on startup.
  * "map" files exceeding 2GB in size failed to load due to
    a size comparison that incorrectly treated the file size
    as a signed integer.
  In 9.16.22:
  * Remove the "adjust interface" mechanism which was
    responsible for setting up listeners on interfaces when
    the "*-source(-v6)" address and port were the same as
    the "listen-on(-v6)" address and port. Such a
    configuration is no longer supported; under certain
    timing conditions, that mechanism could prevent named
    from listening on some TCP ports. This has been fixed.
  * Multiple library names were mistakenly passed to the
    krb5-config utility when ./configure was invoked with
    the --with-gssapi=[/path/to/]krb5-config option. This
    has been fixed by invoking krb5-config separately for
    each required library.
  * Fixed a regression which broke backward compatibility for the 
    "check-names master ..." and "check-names slave ..."
    options. This has been fixed.
  * Address a potential deadlock when checking zone content
    consistency.
  In 9.16.23:
  * Address Coverity warning in lib/dns/dnssec.c.
  * Fix a bug when comparing two RSA keys. There was a typo
    which caused the "p" prime factors to not being
    compared.
  * Fix an assertion failure caused by missing member zones
    during a reload of a catalog zone.
  This obsoletes bind-CVE-2021-25219.patch and
  bind-fix-build-with-older-sphinx.patch
  Other issues:
  A compile time waring about fall through in a switch statement
  has been averted by marking the cases as FALLTHROUGH.
  [bind-9.16.23.tar.xz, bind-9.16.23.tar.xz.sha512.asc,
  bind-CVE-2021-25219.patch, bind-fix-build-with-older-sphinx.patch,
  bind-avoid-fallthrough-warning-error.patch]

-------------------------------------------------------------------
Mon Nov  8 09:01:21 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- Aligned SLE15-SP4 and Factory spec files.
  [bind.spec]

-------------------------------------------------------------------
Thu Nov  4 08:28:45 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- Fixed CVE-2021-25219:
  The lame-ttl option controls how long named caches certain types
  of broken responses from authoritative servers (see the security
  advisory for details). This caching mechanism could be abused by
  an attacker to significantly degrade resolver performance. The
  vulnerability has been mitigated by changing the default value of
  lame-ttl to 0 and overriding any explicitly set value with 0,
  effectively disabling this mechanism altogether. ISC's testing has
  determined that doing that has a negligible impact on resolver
  performance while also preventing abuse.
  Administrators may observe more traffic towards servers issuing
  certain types of broken responses than in previous BIND 9 releases.
  [bsc#1192146, CVE-2021-25219, bind-CVE-2021-25219.patch]

-------------------------------------------------------------------
Mon Oct 18 09:55:18 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- Just specifying "geoip-directory;" in /etc/named.conf is not
  correct syntax. Must either put a path name or the string
  "none". Appended the work "none" to make it correct syntax.

-------------------------------------------------------------------
Fri Oct  8 13:02:17 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- Added build requirement of libmaxminddb to the spec file
  Also added an entry for "geoip-directory" with the default path
  to /etc/named.conf.
  [bsc#1190884, vendor-files/config/named.conf, bind.spec]

-------------------------------------------------------------------
Thu Aug 19 06:25:35 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to 9.16.20
  Bugs fixed:
  * An assertion failure occurred when named attempted to send a
    UDP packet that exceeded the MTU size, if Response Rate
    Limiting (RRL) was enabled.  (CVE-2021-25218)
  * Zones using KASP and inline-signed zones failed to apply
    changes from the unsigned zone to the signed zone under
    certain circumstances.
  * "rndc reload <zonename>" could trigger a redundant reload for
    an inline-signed zone whose zone file was not modified since
    the last "rndc reload".
  * named failed to check the opcode of responses when performing
    zone refreshes, stub zone updates, and UPDATE forwarding.
  * Some changes to "zone-statistics" settings were not properly
    processed by "rndc reconfig".
  * The "check DS" code failed to release all resources upon
    named shutdown when a refresh was in progress.
  * Authentication of rndc messages could fail if a "controls"
    statement was configured with multiple key algorithms for
    the same listener.
  More changes see CHANGES in the source package.
  [bsc#1189460, CVE-2021-25218]

-------------------------------------------------------------------
Thu Jul 29 13:14:28 UTC 2021 - Paolo Stivanin <info@paolostivanin.com>

- Update to 9.16.19
  * A race condition could occur where two threads were
    competing for the same set of key file locks, leading to
    a deadlock. This has been fixed. [GL #2786]
  * create_keydata() created an invalid placeholder keydata
    record upon a refresh failure, which prevented the
    database of managed keys from subsequently being read
    back. This has been fixed. [GL #2686]
  * KASP support was extended with the "check DS" feature.
    Zones with "dnssec-policy" and "parental-agents"
    configured now check for DS presence and can perform
    automatic KSK rollovers. [GL #1126]
  * Rescheduling a setnsec3param() task when a zone failed
    to load on startup caused a hang on shutdown. This has
    been fixed. [GL #2791]
  * The configuration-checking code failed to account for
    the inheritance rules of the "dnssec-policy" option.
    This has been fixed. [GL #2780]
  * If nsupdate sends an SOA request and receives a REFUSED
    response, it now fails over to the next available
    server. [GL #2758]
  * For UDP messages larger than the path MTU, named now
    sends an empty response with the TC (TrunCated) bit set.
    In addition, setting the DF (Don't Fragment) flag on
    outgoing UDP sockets was re-enabled. [GL #2790]
  * Views with recursion disabled are now configured with a
    default cache size of 2 MB unless "max-cache-size" is
    explicitly set. This prevents cache RBT hash tables from
    being needlessly preallocated for such views. [GL #2777]
  * Change 5644 inadvertently introduced a deadlock: when
    locking the key file mutex for each zone structure in a
    different view, the "in-view" logic was not considered.
    This has been fixed. [GL #2783]
  * Increasing "max-cache-size" for a running named instance
    (using "rndc reconfig") did not cause the hash tables
    used by cache databases to be grown accordingly. This
    has been fixed. [GL #2770]
  * Signed, insecure delegation responses prepared by named
    either lacked the necessary NSEC records or contained
    duplicate NSEC records when both wildcard expansion and
    CNAME chaining were required to prepare the response.
    This has been fixed. [GL #2759]
  * A bug that caused the NSEC3 salt to be changed on every
    restart for zones using KASP has been fixed. [GL #2725]

-------------------------------------------------------------------
Wed Jul 21 09:34:15 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- Since BIND 9.9, it has been easier to use tsig-keygen and
  ddns-confgen to generare TSIG keys. In 9.13, TSIG support was
  removed from dnssec-keygen, so now it is just for DNSKEY (and KEY
  for obscure cases). tsig-keygen is now used to generate DDNS keys.
  [bsc#1187921, vendor-files.tar.bz2]

-------------------------------------------------------------------
Thu Jun 24 15:02:14 UTC 2021 - Hans-Peter Jansen <hpj@urpla.net>

- Add patch bind-fix-build-with-older-sphinx.patch and sed fix
  in order to build with older distributions.

-------------------------------------------------------------------
Wed Jun 23 06:46:55 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to 9.16.18
  * The configuration-checking code failed to account for the
    inheritance rules of the "key-directory" option.
  * When preparing DNS responses, named could replace the letters
    'W' (uppercase) and 'w' (lowercase) with '\000'.
    This has been fixed.
    [bind-9.16.18.tar.xz, bind-9.16.18.tar.xz.sha512.asc]

-------------------------------------------------------------------
Sat Jun 19 13:11:07 UTC 2021 - Callum Farmer <gmbr3@opensuse.org>

- Add now working CONFIG parameter to sysusers generator

-------------------------------------------------------------------
Thu Jun 17 09:01:18 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to 9.16.17
  Major changes (bug fixes):
  * A copy-and-paste error caused the IP_DONTFRAG socket option to
    be enabled instead of disabled. This has been fixed.
  * The calculation of the estimated IXFR transaction size in
    dns_journal_iter_init() was invalid.
  * Fix a race condition in reading and writing key files for zones
    using KASP and configured in multiple views.
  * Zones which are configured in multiple views with different
    values set for "dnssec-policy" and with identical values set
    for "key-directory" are now detected and treated as a
    configuration error.
  * Address a potential memory leak in dst_key_fromnamedfile().
  * Check that the first and last SOA record of an AXFR are
    consistent.
  * Improvements related to network manager/task manager
    integration
  [bind-9.16.17.tar.xz, bind-9.16.17.tar.xz.sha512.asc]

-------------------------------------------------------------------
Fri May 21 07:23:04 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- vendor-files/system/named.prep was missing a $
  [bsc#1186278, vendor-files.tar.bz2]

-------------------------------------------------------------------
Thu May 20 06:21:17 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to bind 9.16.16
  * Feature Changes
    + DNSSEC responses containing NSEC3 records with iteration counts
      greater than 150 are now treated as insecure. [GL #2445]
    + The maximum supported number of NSEC3 iterations that can be
      configured for a zone has been reduced to 150. [GL #2642]
    + The default value of the max-ixfr-ratio option was changed to
      unlimited, for better backwards compatibility in the stable
      release series. [GL #2671]
    + Zones that want to transition from secure to insecure mode
      without becoming bogus in the process must now have their
      dnssec-policy changed first to insecure, rather than none. After
      the DNSSEC records have been removed from the zone, the
      dnssec-policy can be set to none or removed from the
      configuration. Setting the dnssec-policy to insecure causes CDS
      and CDNSKEY DELETE records to be published. [GL #2645]
    + The implementation of the ZONEMD RR type has been updated to
      match RFC 8976. [GL #2658]
    + The draft-vandijk-dnsop-nsec-ttl IETF draft was implemented:
      NSEC(3) TTL values are now set to the minimum of the SOA MINIMUM
      value or the SOA TTL. [GL #2347]
  * Bug Fixes
    + It was possible for corrupt journal files generated by an earlier
      version of named to cause problems after an upgrade. This has been
      fixed. [GL #2670]
    + TTL values in cache dumps were reported incorrectly when
      stale-cache-enable was set to yes. This has been fixed.
      [GL #389] [GL #2289]
    + A deadlock could occur when multiple rndc addzone, rndc delzone,
      and/or rndc modzone commands were invoked simultaneously for
      different zones. This has been fixed. [GL #2626]
    + named and named-checkconf did not report an error when multiple
      zones with the dnssec-policy option set were using the same zone
      file. This has been fixed. [GL #2603]
    + If dnssec-policy was active and a private key file was temporarily
      offline during a rekey event, named could incorrectly introduce
      replacement keys and break a signed zone. This has been fixed.
      [GL #2596]
    + When generating zone signing keys, KASP now also checks for key
      ID conflicts among newly created keys, rather than just between
      new and existing ones. [GL #2628]

-------------------------------------------------------------------
Tue May 18 06:57:16 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- In /usr/libexec/bind/named.prep the order of arguments for
  "ln -s" was wrong.
  [vendor-files/system/named.prep, bsc#1186057]

-------------------------------------------------------------------
Mon May 17 14:20:08 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- "systemctl reload named" does not work:
  * the "kill" command is in /usr/bin, not in /sbin,
  *  the order of the options/arguments was wrong, and
  * the "-p" option is wrong (it's not like strace's "-p").
  [bsc#1186046, vendor-files/system/named.service]

-------------------------------------------------------------------
Mon May 10 17:09:43 UTC 2021 - Ferdinand Thiessen <rpm@fthiessen.de>

- SPEC file: Fixed outdated URL and use secured SourceURLs

-------------------------------------------------------------------
Mon May  3 12:35:44 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to bind 9.16.15
  Major changes:
  * A specially crafted GSS-TSIG query could cause a buffer
    overflow in the ISC implementation of SPNEGO.
    (CVE-2021-25216)

* named crashed when a DNAME record placed in the ANSWER
    section during DNAME chasing turned out to be the final
    answer to a client query. (CVE-2021-25215)

* Insufficient IXFR checks could result in named serving a
    zone without an SOA record at the apex, leading to a
    RUNTIME_CHECK assertion failure when the zone was
    subsequently refreshed. This has been fixed by adding an
    owner name check for all SOA records which are included
    in a zone transfer. (CVE-2021-25214)
  More changes see CHANGES in the source package.

[bsc#1185345,CVE-2021-25214,CVE-2021-25215,CVE-2021-25216]

-------------------------------------------------------------------
Thu Apr  8 09:23:22 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- Rewrite of named service handling to better cope with systemd
  protection (see change from Thu Jan 21) by introducing a
  separate script "named.prep" which runs without restrictions
  prior to starting named.
  Removed all references to "lwresd" as "The lightweight resolver
  daemon and library (lwresd and liblwres) have been removed."
  (See CHANGES, item 4707)
  [bind.spec, vendor-files.tar.bz2]

-------------------------------------------------------------------
Tue Mar 23 12:34:53 UTC 2021 - Jan Engelhardt <jengelh@inai.de>

- Modernize specfile, and declare /bin/bash as required buildshell
  (use of {a,b} style expansion).

-------------------------------------------------------------------
Fri Mar 12 15:03:21 UTC 2021 - Matthias Gerstner <matthias.gerstner@suse.com>

- pass PIE compiler and linker flags via environment variables to make
  /usr/bin/delv in bind-tools also position independent (bsc#1183453).
- drop pie_compile.diff: no longer needed, this patch is difficult to
  maintain, the environment variable approach is less error prone.

-------------------------------------------------------------------
Thu Feb 18 08:44:47 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- *** MAJOR CHANGES ***
  * The libraries shipped with bind are now named after the bind
    version (eg libisc-9.16.10.so), not some kind of artificial
    number (eg libisc.so.1608)!
  * For the time being (ie until the next upgrade),
    new BIND option "stale-answer-client-timeout"
    will be disabled (in /etc/named.conf): "stale-answer-enable no;"
  * All libraries are now in bind-utils as they are used by bind
    and bind-utils only and bind requires bind-utils.
    This affects libdns, libirs, libisc, libisccc, libisccfg,
    libns
  * Dropped the devel packages as the libraries are used
    internally only.

* Update to 9.16.12
    Bugs fixed:
    - KASP incorrectly set signature validity to the value of
      the DNSKEY signature validity.
    - Fix off-by-one bug in ISC SPNEGO implementation.
      (CVE-2020-8625)
    - Dig now reports unknown dash options while pre-parsing
      the options. This prevents "-multi" instead of "+multi"
      from reporting memory usage before ending option parsing
      with "Invalid option: -lti".
    - Fixed a crash in "dnssec-keyfromlabel" when using ECDSA
      keys.
    - Emit useful error message when "rndc retransfer" is
      applied to a zone of inappropriate type.
    - Improve performance of the DNSSEC verification code by
      reducing the number of repeated calls to
      dns_dnssec_keyfromrdata().
    - named failed to start when its configuration included a
      zone with a non-builtin "allow-update" ACL attached.
    - Address potential double free in generatexml().
    - When migrating to KASP, BIND 9 considered keys with the
      "Inactive" and/or "Delete" timing metadata to be 
      possible active keys.
    - Fix the "three is a crowd" key rollover bug in KASP by
      correctly implementing Equation (2) of the "Flexible and
      Robust Key Rollover" paper.

* dnssec-keygen can no longer generate HMAC keys.
    Use tsig-keygen instead.
    genDDNSkey script was modified to reflect this.
  [vendor-files/tools/bind.genDDNSkey, bsc#1180933, CVE-2020-8625,
   bsc#1182246, bsc#1182483]

-------------------------------------------------------------------
Thu Jan 21 08:00:03 UTC 2021 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to version 9.16.11
  * Bug fixing (please check CHANGES file in the source RPM)
  * Functional change:
    policy none;", named now
    permits a safe transition to insecure mode and publishes
    the CDS and CDNSKEY DELETE records, as described in RFC 8078.

Remove useless Makefiles and Makefile skeleton files in
  /usr/share/doc/packages/bind/contrib/
  [bind.spec, bsc#1179040]

*** MAJOR CHANGE ***
  Changed protection of/against "named" from chroot jail to
  systemd protection. This obsoletes subpackage named-chrootenv.
  Kudos to Matthias Gerstner <matthias.gerstner@suse.com>
  [bind.spec, bind-chrootenv.conf, vendor-files.tar.bz2, bsc#1180294]

-------------------------------------------------------------------
Tue Dec 29 19:28:46 UTC 2020 - Dirk Müller <dmueller@suse.com>

- update to 9.16.10:
  New Features:
  * NSEC3 support was added to KASP. A new option for dnssec-policy,
  nsec3param, can be used to set the desired NSEC3 parameters. NSEC3 salt
  collisions are automatically prevented during resalting. [GL #1620]

* A new configuration option, stale-refresh-time, has been introduced. It allows
  a stale RRset to be served directly from cache for a period of time after a
  failed lookup, before a new attempt to refresh it is made. [GL #2066]

Feature Changes:
  * The default value of max-recursion-queries was increased from 75 to 100.
  Since the queries sent towards root and TLD servers are now included in the
  count (as a result of the fix for CVE-2020-8616), max-recursion-queries has
  a higher chance of being exceeded by non-attack queries, which is the main
  reason for increasing its default value. [GL #2305]

The default value of nocookie-udp-size was restored back to 4096 bytes. Since
  max-udp-size is the upper bound for nocookie-udp-size, this change relieves the
  operator from having to change nocookie-udp-size together with max-udp-size in
  order to increase the default EDNS buffer size limit. nocookie-udp-size can
  still be set to a value lower than max-udp-size, if desired. [GL #2250]

Bug Fixes:
  Handling of missing DNS COOKIE responses over UDP was tightened by falling
  back to TCP. [GL #2275]

The CNAME synthesized from a DNAME was incorrectly followed when the QTYPE was
  CNAME or ANY. [GL #2280]

Building with native PKCS#11 support for AEP Keyper has been broken since BIND
  9.16.6. This has been fixed. [GL #2315]

named could crash with an assertion failure if a TCP connection were closed
  while a request was still being processed. [GL #2227]

named acting as a resolver could incorrectly treat signed zones with no DS
  record at the parent as bogus. Such zones should be treated as insecure. This
  has been fixed. [GL #2236]

After a Negative Trust Anchor (NTA) is added, BIND performs periodic checks
  to see if it is still necessary. If BIND encountered a failure while creating a
  query to perform such a check, it attempted to dereference a NULL pointer,
  resulting in a crash. [GL #2244]

A problem obtaining glue records could prevent a stub zone from functioning
  properly, if the authoritative server for the zone were configured for minimal
  responses. [GL #1736]

UV_EOF is no longer treated as a TCP4RecvErr or a TCP6RecvErr. [GL #2208]

-------------------------------------------------------------------
Wed Nov 11 10:55:46 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- Added special make instruction for the "Administrator Reference
  Manual" which is built using python3-Sphinx
  [bsc#1177983, bind.spec]
- Removed "Before=nss-lookup.target" from named.service as that
  leads to a systemd ordering cycle
  [bsc#1177491, bsc#1178626, bsc#1177991, vendor-files.tar.bz2]

-------------------------------------------------------------------
Wed Oct 28 12:50:56 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to version 9.16.8
  New Features:
  * Add a new rndc command, "rndc dnssec -rollover", which triggers a
    manual rollover for a specific key.
  * Add a new rndc command, "rndc dumpdb -expired", which dumps the
    cache database, including expired RRsets that are awaiting
    cleanup, to the dump-file for diagnostic purposes.
  Bug Fixes:
  * named reported an invalid memory size when running in an environment
    that did not properly report the number of available memory pages
    and/or the size of each memory page.
  * With multiple forwarders configured, named could fail the
    REQUIRE(msg->state == (-1)) assertion in lib/dns/message.c,
    causing it to crash. This has been fixed.
  * named erroneously performed continuous key rollovers for KASP
    policies that used algorithm Ed25519 or Ed448 due to a mismatch
    between created key size and expected key size.
  * Updating contents of an RPZ zone which contained names spelled
    using varying letter case could cause some processing rules in
    that RPZ zone to be erroneously ignored.
  Local changes:
  * Add /usr/lib64/named to the files and directories in
    bind-chrootenv.conf. This directory contains plugins loaded
    after the chroot().
  [bsc#1177913,bsc#1178078,bsc#1177603,bind-chrootenv.conf]

-------------------------------------------------------------------
Fri Oct 23 11:29:25 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- Removed "dnssec-enable" from named.conf as it has been obsoleted.
  Added a comment for reference which should be removed
  in the future.
- Added a comment to the "dnssec-validation" in named.conf
  with a reference to forwarders which do not return signed responses.
- Replaced named's dependency on time-sync with a dependency on time-set
  in named.service.
  [bsc#1177790,bsc#1175894,bsc#1177915,vendor-files.tar.bz2]

-------------------------------------------------------------------
Wed Oct 21 09:05:49 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to version 9.16.7
  * Fix (non-)publication of CDS and CDNSKEY records.
  * 'dig +bufsize=0' failed to disable EDNS.
  * Address a TSAN report by ensuring each rate limiter
    object holds a reference to its task.
  * With query minimization enabled, named failed to
    resolve ip6.arpa. names that had extra labels to the
    left of the IPv6 part.
  * Silence the EPROTO syslog message on older systems.
  * Fix off-by-one error when calculating new hash table size.
  * Tighten LOC parsing to reject a period (".") and/or "m"
    as a value. Fix handling of negative altitudes which are
    not whole meters.
  * rbtversion->glue_table_size could be read without the
    appropriate lock being held.
  * Named erroneously accepted certain invalid resource
    records that were incorrectly processed after
    subsequently being written to disk and loaded back, as
    the wire format differed. Such records include: CERT,
    IPSECKEY, NSEC3, NSEC3PARAM, NXT, SIG, TLSA, WKS, and X25.
  * NTA code needed to have a weak reference on its
    associated view to prevent the latter from being deleted
    while NTA tests were being performed.
  * replace an INSIST() (which calls abort()) with a check and
    an error message.
  [bsc#1177913, bind-9.16.7.tar.xz]

-------------------------------------------------------------------
Fri Sep 18 13:20:34 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- Removed "-r /dev/urandom" from all invocations of rndc-confgen
  (init/named system/lwresd.init system/named.init in vendor-files)
  as this option is deprecated and causes rndc-confgen to fail.
  [bsc#1173311, bsc#1176674, bsc#1170713, vendor-files.tar.bz2]

-------------------------------------------------------------------
Tue Sep 15 13:54:05 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- /usr/bin/genDDNSkey: Removing the use of the -r option in the call
  of /usr/sbin/dnssec-keygen as BIND now uses the random number
  functions provided by the crypto library (i.e., OpenSSL or a
  PKCS#11 provider) as a source of randomness rather than /dev/random.
  Therefore the -r command line option no longer has any effect on
  dnssec-keygen. Leaving the option in genDDNSkey as to not break
  compatibility. Patch provided by Stefan Eisenwiener.
  [bsc#1171313, vendor-files.tar.bz2]

-------------------------------------------------------------------
Fri Sep  4 14:40:27 UTC 2020 - Reinhard Max <max@suse.com>

- Put libns into a separate subpackage to avoid file conflicts
  in the libisc subpackage due to different sonums (bsc#1176092).

-------------------------------------------------------------------
Fri Aug 28 09:38:11 UTC 2020 - Dominique Leuenberger <dimstar@opensuse.org>

- Require /sbin/start_daemon: both init scripts, the one used in
  systemd context as well as legacy sysv, make use of start_daemon.

-------------------------------------------------------------------
Tue Aug 18 12:13:49 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to version 9.16.6
  Fixes five vilnerabilities:
  5481.   [security]      "update-policy" rules of type "subdomain" were
                          incorrectly treated as "zonesub" rules, which allowed
                          keys used in "subdomain" rules to update names outside
                          of the specified subdomains. The problem was fixed by
                          making sure "subdomain" rules are again processed as
                          described in the ARM. (CVE-2020-8624) [GL #2055]

5480.   [security]      When BIND 9 was compiled with native PKCS#11 support, it
                          was possible to trigger an assertion failure in code 
                          determining the number of bits in the PKCS#11 RSA public
                          key with a specially crafted packet. (CVE-2020-8623)
                          [GL #2037]

5479.   [security]      named could crash in certain query resolution scenarios
                          where QNAME minimization and forwarding were both 
                          enabled. (CVE-2020-8621) [GL #1997]

5478.   [security]      It was possible to trigger an assertion failure by
                          sending a specially crafted large TCP DNS message.
                          (CVE-2020-8620) [GL #1996]

5476.   [security]      It was possible to trigger an assertion failure when 
                          verifying the response to a TSIG-signed request.
                          (CVE-2020-8622) [GL #2028]
  For the less severe bugs fixed, see the CHANGES file.
  [bsc#1175443, CVE-2020-8624, CVE-2020-8623, CVE-2020-8621,
   CVE-2020-8620, CVE-2020-8622]

-------------------------------------------------------------------
Thu Aug  6 12:35:10 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- Added "/etc/bind.keys" to NAMED_CONF_INCLUDE_FILES in
  /etc/sysconfig/named to suppress warning message re
  missing file.
  [vendor-files.tar.bz2, bsc#1173983]

-------------------------------------------------------------------
Tue Jul 21 14:06:51 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to version bind-9.16.5
  * The "primary" and "secondary" keywords, when used
    as parameters for "check-names", were not
    processed correctly and were being ignored.
  * 'rndc dnstap -roll <value>' did not limit the number of
    saved files to <value>.
  * Add 'rndc dnssec -status' command.
  * Addressed a couple of situations where named could crash
  For the full list, see the CHANGES file in the source RPM.

-------------------------------------------------------------------
Tue Jun 30 08:32:21 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- Changed /var/lib/named to owner root:named and perms rwxrwxr-t
  so that named, being a/the only member of the "named" group
  has full r/w access yet cannot change directories owned by root
  in the case of a compromized named.
  [bsc#1173307, bind-chrootenv.conf]

-------------------------------------------------------------------
Thu Jun 18 06:35:35 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to version bind-9.16.4
  Fixing two security problems: 
  * It was possible to trigger an INSIST when determining
    whether a record would fit into a TCP message buffer.
    (CVE-2020-8618)
  * It was possible to trigger an INSIST in
    lib/dns/rbtdb.c:new_reference() with a particular zone
    content and query patterns. (CVE-2020-8619)
  Also the following functional changes:
  * Reject DS records at the zone apex when loading
    master files. Log but otherwise ignore attempts to
    add DS records at the zone apex via UPDATE.
  * The default value of "max-stale-ttl" has been changed
    from 1 week to 12 hours.
  * Zone timers are now exported via statistics channel.
    Thanks to Paul Frieden, Verizon Media.
  Added support for idn2 to spec file (Thanks to Holger Bruenjes
  <holgerbruenjes@gmx.net>).
  More internal changes see the CHANGES file in the source RPM
  This update obsoletes Makefile.in.diff
  [bsc#1172958, CVE-2020-8618, CVE-2020-8619, Makefile.in.diff
   bind.spec]

-------------------------------------------------------------------
Fri May 15 13:43:46 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to version bind-9.16.3
  Fixing two security problems:
  * Further limit the number of queries that can be triggered from
    a request.  Root and TLD servers are no longer exempt
    from max-recursion-queries.  Fetches for missing name server
    address records are limited to 4 for any domain. (CVE-2020-8616)
  * Replaying a TSIG BADTIME response as a request could trigger an
    assertion failure. (CVE-2020-8617)
  Also
  * Add engine support to OpenSSL EdDSA implementation.
  * Add engine support to OpenSSL ECDSA implementation.
  * Update PKCS#11 EdDSA implementation to PKCS#11 v3.0.
  * Warn about AXFR streams with inconsistent message IDs.
  * Make ISC rwlock implementation the default again.
  For more see CHANGS file in source RPM.
  [CVE-2020-8616, CVE-2020-8617, bsc#1171740, bind-9.16.3.tar.xz]

-------------------------------------------------------------------
Fri May  8 12:07:50 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- bind needs an accurate clock, so wait for the time-sync.target
  to be reached before starting bind.
  [bsc#1170667, bsc#1170713, vendor-files.tar.bz2]

-------------------------------------------------------------------
Sat Mar 21 08:56:28 UTC 2020 - Thorsten Kukuk <kukuk@suse.com>

- Use sysusers.d to create named user
- Have only one package creating the user

-------------------------------------------------------------------
Fri Mar 20 09:00:07 UTC 2020 - Thorsten Kukuk <kukuk@suse.com>

- coreutils are not used in %post, remove Requires.
- Use systemd_ordering instead of hard requiring systemd

-------------------------------------------------------------------
Fri Mar 20 08:04:19 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to version 9.16.1
  * UDP network ports used for listening can no longer simultaneously
    be used for sending traffic.
  * The system-provided POSIX Threads read-write lock implementation
    is now used by default instead of the native BIND 9 implementation.
  * Fixed re-signing issues with inline zones which resulted in records
    being re-signed late or not at all. 
  [bind-9.16.1.tar.xz]

-------------------------------------------------------------------
Sat Feb 22 07:42:08 UTC 2020 - Tomáš Chvátal <tchvatal@suse.com>

- Update download urls
- Do not enable geoip on old distros, the geoip db was shut down
  so we need to use geoip2 everywhere

-------------------------------------------------------------------
Thu Feb 20 09:33:45 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to version 9.16.0
  Major upgrade, see
  https://downloads.isc.org/isc/bind9/9.16.0/RELEASE-NOTES-bind-9.16.0.html
  and
  CHANGES file in the source tree.
  Major functional change:
  * What was set with --with-tuning=large option in older BIND9
    versions is now a default, and a --with-tuning=small option was
    added for small (e.g. OpenWRT) systems.
  * A new "dnssec-policy" option has been added to named.conf to
    implement a key and signing policy (KASP) for zones.
  * The command (and manpage) bind9-config have been dropped as the
    BIND 9 libraries are now purely internal.
  No patches became obsolete through the upgrade.
  [bind-9.16.0.tar.xz]

-------------------------------------------------------------------
Wed Jan  8 13:54:03 UTC 2020 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to bind-9.14.9
  bug fixes and feature improvements

-------------------------------------------------------------------
Tue Nov 19 10:09:35 UTC 2019 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to version 9.14.8:
  * Set a limit on the number of concurrently served pipelined TCP
    queries.
  * Some other bug fixing, see CHANGES file.
  [CVE-2019-6477, bsc#1157051]

-------------------------------------------------------------------
Fri Nov  8 12:50:00 UTC 2019 - Josef Möllers <josef.moellers@suse.com>

- Upgrade to version 9.14.7
  * removed dnsperf, idn, nslint, perftcpdns, query-loc-0.4.0,
    queryperf, sdb, zkt from contrib as they are not supported
    any more
  * Added support for the GeoIP2 API from MaxMind
  * See CHANGES file in the source RPM.
  * obsoletes bind-CVE-2018-5745.patch (bsc#1126068)
  * obsoletes bind-CVE-2019-6465.patch (bsc#1126069)
  * obsoletes bind-CVE-2018-5743.patch (bsc#1133185)
  * obsoletes bind-CVE-2019-6471.patch (bsc#1138687)
  [bsc#1111722, bsc#1156205, bsc#1126068, bsc#1126069, bsc#1133185,
  bsc#1138687, CVE-2019-6476, CVE-2019-6475,
  CVE-2019-6471, CVE-2018-5743, CVE-2019-6467, CVE-2019-6465,
  CVE-2018-5745, CVE-2018-5744, CVE-2018-5740, CVE-2018-5738,
  CVE-2018-5737, CVE-2018-5736, CVE-2017-3145, CVE-2017-3136,
  configure.in.diff, bind-99-libidn.patch, perl-path.diff,
  bind-sdb-ldap.patch, bind-CVE-2017-3145.patch,
  bug-4697-Restore-workaro]und-for-Microsoft-Windows-T.patch,
  bind-fix-fips.patch, bind-CVE-2018-5745.patch,
  bind-CVE-2019-6465.patch, bind-CVE-2018-5743.patch,
  bind-CVE-2019-6471.patch, CVE-2016-6170, bsc#1018700,
  bsc#1018701, bsc#1018702, bsc#1033466, bsc#1033467, bsc#1033468,
  bsc#1040039, bsc#1047184, bsc#1104129, bsc#906079, bsc#918330,
  bsc#936476, bsc#937028, bsc#939567, bsc#977657, bsc#983505,
  bsc#987866, bsc#989528, fate#320694, fate#324357, bnc#1127583,
  bnc#1127583, bnc#1109160]

-------------------------------------------------------------------
Fri Jul 12 08:43:29 UTC 2019 - matthias.gerstner@suse.com

- removal of SuSEfirewall2 service from Factory, since SuSEfirewall2 has been
  replaced by firewalld, see [1].

[1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html

-------------------------------------------------------------------
Tue Apr 16 10:15:22 UTC 2019 - Navin Kukreja <navin.kukreja@suse.com>

- Add FIPS patch back into bind (bsc#1128220)
- File: bind-fix-fips.patch

-------------------------------------------------------------------
Mon Dec 10 09:25:44 UTC 2018 - Franck Bui <fbui@suse.com>

- Don't rely on /etc/insserv.conf anymore for proper dependencies
  against nss-lookup.target in named.service and lwresd.service
  (bsc#1118367 bsc#1118368)

-------------------------------------------------------------------
Tue Sep 25 08:13:33 UTC 2018 - Christophe Giboudeaux <christophe@krop.fr>

- Update named.root. One of the root servers IP has changed.
- Install the LICENSE file.

-------------------------------------------------------------------
Fri Jul  6 11:09:23 CEST 2018 - kukuk@suse.de

- Add bind.conf and bind-chrootenv.conf to install the default
  files in /var/lib/named and create chroot environment on systems
  using transactional-updates [bsc#1100369] [FATE#325524].

-------------------------------------------------------------------
Fri Jun 22 15:10:39 CEST 2018 - kukuk@suse.de

- Cleanup pre/post install: remove all old code which was needed to
  update to SLES8.

-------------------------------------------------------------------
Wed Jun  6 12:03:25 UTC 2018 - navin.kukreja@suse.com

- Fix a patch error in dnszone-schema file (bsc#901577)

-------------------------------------------------------------------
Tue Jun  5 10:47:22 UTC 2018 - navin.kukreja@suse.com

- Add SPF records in dnszone-schema file (bsc#901577)

-------------------------------------------------------------------
Tue Jun  5 09:01:52 UTC 2018 - navin.kukreja@suse.com

- Fix the hostname in ldapdump to be valid (bsc#965748) 
- Patch file - bind-ldapdump-use-valid-host.patch

-------------------------------------------------------------------
Mon May 21 11:57:47 UTC 2018 - scabrero@suse.de

- Add bug-4697-Restore-workaround-for-Microsoft-Windows-T.patch
  Fixes dynamic DNS updates against samba and Microsoft DNS servers
  (bsc#1094236).

-------------------------------------------------------------------
Thu May 17 14:28:29 UTC 2018 - navin.kukreja@suse.com

- Move chroot related files from bind to bind-chrootenv 
  (bsc#1093338)

-------------------------------------------------------------------
Wed May 16 10:22:25 UTC 2018 - navin.kukreja@suse.com

- Remove rndc.key generation from bind.spec file because bind
  should create it on first boot (bsc#1092283)
- Add misisng rndc.key check and generation code is lwresd.init
  script

-------------------------------------------------------------------
Mon Feb 26 19:26:17 UTC 2018 - sweet_f_a@gmx.de

- build with --enable-filter-aaaa to make it possible to use
  config option "filter-aaaa-on-v4 yes". Useful to workaround
  broken websites like netflix which block traffic from certain
  IPv6 tunnel providers. (bsc#1069633)

-------------------------------------------------------------------
Fri Feb 16 12:59:41 UTC 2018 - bwiedemann@suse.com

- Add /dev/urandom to chroot env

-------------------------------------------------------------------
Wed Feb  7 15:17:17 UTC 2018 - navin.kukreja@suse.com

- Implement systemd init scripts for bind and lwresd (fate#323155)

-------------------------------------------------------------------
Tue Jan 23 21:59:24 UTC 2018 - navin.kukreja@suse.com

- Apply bind-CVE-2017-3145.patch to fix CVE-2017-3145 (bsc#1076118)

-------------------------------------------------------------------
Wed Dec  6 13:35:59 UTC 2017 - vcizek@suse.com

- Use getent when adding user/group
- update changelog to mention removed options

-------------------------------------------------------------------
Sat Nov 25 15:31:18 UTC 2017 - meissner@suse.com

- license changed to MPL-2.0 according to legal.

-------------------------------------------------------------------
Thu Nov 23 13:38:07 UTC 2017 - rbrown@suse.com

- Replace references to /var/adm/fillup-templates with new 
  %_fillupdir macro (boo#1069468)

-------------------------------------------------------------------
Wed Nov 22 13:13:26 UTC 2017 - vcizek@suse.com

- Add back init scripts, systemd units aren't ready yet

-------------------------------------------------------------------
Thu Nov 21 14:30:52 UTC 2017 - tchvatal@suse.com

- Add python3-bind subpackage to allow python bind interactions

-------------------------------------------------------------------
Thu Nov 21 13:41:38 UTC 2017 - tchvatal@suse.com

- Sync configure options with RH package and remove unused ones
  * Enable python3
  * Enable gssapi
  * Enable dnssec scripts
  * Remove no longer recognized --enable-rrl

-------------------------------------------------------------------
Thu Nov 21 12:54:35 UTC 2017 - tchvatal@suse.com

- Drop idnkit from the build, the bind uses libidn since 2007 to run
  all the resolutions in dig/etc. bsc#1030306
- Add patch to make sure we build against system idn:
  * bind-99-libidn.patch
- Refresh patch:
  * pie_compile.diff
- Remove patches that are unused due to above:
  * idnkit-powerpc-ltconfig.patch
  * runidn.diff

-------------------------------------------------------------------
Thu Nov 21 12:11:08 UTC 2017 - vcizek@suse.com

- drop bind-openssl11.patch (merged upstream)

-------------------------------------------------------------------
Thu Nov 17 11:35:29 UTC 2017 - tchvatal@suse.com

- Remove systemd conditionals as we are not building on sle11 anyway
- Force the systemd to be base for the initscript deployment

-------------------------------------------------------------------
Tue Nov 15 08:43:05 UTC 2017 - vcizek@suse.com

- Bump up version of most of the libraries
- Rename the subpackages to match the version updates
- Add macros for easier handling of the library package names
- Drop more unneeded patches
  * dns_dynamic_db.patch (upstream)

-------------------------------------------------------------------
Tue Nov 14 11:17:03 UTC 2017 - tchvatal@suse.com

- Update to 9.11.2 release:
  * Many changes compared to 9.10 see the README file for in-depth listing
  * For detailed changes with issues see CHANGES file
  * Fixes for CVE-2017-3141 CVE-2017-3140 CVE-2017-3138 CVE-2017-3137 
    CVE-3136 CVE-2016-9778
  * OpenSSL 1.1 support
- Remove support for some old distributions and cleanup the spec file
  to require only what is really needed
- Switch to systemd (bsc#1053808)
- Remove german from the postinst messages
- Remove patches merged upstream:
  * bind-CVE-2017-3135.patch
  * bind-CVE-2017-3142-and-3143.patch
- Refresh named.root with another update

-------------------------------------------------------------------
Mon Nov 13 14:20:43 UTC 2017 - mpluskal@suse.com

- Use python3 by default (fate#323526)

-------------------------------------------------------------------
Mon Sep 11 15:43:38 UTC 2017 - meissner@suse.com

- bind-openssl11.patch: add a patch for enabling
  openssl 1.1 support (builds for 1.0 and 1.1 openssl).
  (bsc#1042635)

-------------------------------------------------------------------
Tue Aug  1 12:59:39 UTC 2017 - jcnengel@gmail.com

- Enable JSON statistics

-------------------------------------------------------------------
Fri Jul 14 12:01:43 UTC 2017 - meissner@suse.com

- named.root: refreshed from internic to 2017060102 (bsc#1048729)

-------------------------------------------------------------------
Mon Jul  3 08:47:39 UTC 2017 - dimstar@opensuse.org

- Run systemctl daemon-reload even when this is not build with
  systemd support: if installing bind on a systemd service and not
  reloading systemd daemon, then the service 'named' is not known
  right after package installation, causing confusion.

-------------------------------------------------------------------
Fri Jun 30 07:12:50 UTC 2017 - sflees@suse.de

- Added bind-CVE-2017-3142-and-3143.patch to fix a security issue
  where an attacker with the ability to send and receive messages
  to an authoritative DNS server was able to circumvent TSIG
  authentication of AXFR requests. A server that relies solely on
  TSIG keys for protection with no other ACL protection could be
  manipulated into (1) providing an AXFR of a zone to an
  unauthorized recipient and (2) accepting bogus Notify packets.
  [bsc#1046554, CVE-2017-3142, bsc#1046555, CVE-2017-3143]

-------------------------------------------------------------------
Sat May 20 11:46:44 UTC 2017 - dimstar@opensuse.org

- Fix named init script to dynamically find the location of the
   openssl engines (boo#1040027).

-------------------------------------------------------------------
Mon Mar 20 15:02:16 CET 2017 - kukuk@suse.de

- Add with_systemd define with default off, since we still use init
  scripts and no systemd units.

-------------------------------------------------------------------
Sat Feb 18 17:24:58 UTC 2017 - kukuk@suse.com

- Don't require and call insserv if we use systemd

-------------------------------------------------------------------
Wed Feb 15 12:50:42 UTC 2017 - navin.kukreja@suse.com

- Fix assertion failure or a NULL pointer read for configurations using both DNS64 and RPZ
  * CVE-2017-3135, bsc#1024130
  * bind-CVE-2017-3135.patch

-------------------------------------------------------------------
Thu Jan 12 04:43:56 UTC 2017 - sflees@suse.de

- Update to latest release in the 9.10.X series
  * Security fixes in 9.10.4 
    * Duplicate EDNS COOKIE options in a response could trigger an assertion failure. 
      CVE-2016-2088. [RT #41809]
    * The resolver could abort with an assertion failure due to improper DNAME handling
      when parsing fetch reply messages. CVE-2016-1286. [RT #41753]
    * Malformed control messages can trigger assertions in named and rndc. 
      CVE-2016-1285. [RT #41666]
    * Certain errors that could be encountered when printing out or logging an OPT record containing 
      a CLIENT-SUBNET option could be mishandled, resulting in an assertion failure. CVE-2015-8705. [RT #41397]
    * Specific APL data could trigger an INSIST. CVE-2015-8704. [RT #41396]
    * Incorrect reference counting could result in an INSIST failure if a socket error occurred while performing
      a lookup. CVE-2015-8461. [RT#40945]
    * Insufficient testing when parsing a message allowed records with an incorrect class to be be accepted, 
      triggering a REQUIRE failure when those records were subsequently cached. CVE-2015-8000. [RT #40987]
  * For Features and other fixes in 9.10.4 see https://kb.isc.org/article/AA-01380/0/BIND-9.10.4-Release-Notes.html
  * Description of patch changes
    * BIND 9.10.4-P5 addresses the security issues described in CVE-2016-9131, CVE-2016-9147 and CVE-2016-9444. [bsc#1018699]
    * BIND 9.10.4-P4 addresses the security issue described in CVE-2016-8864.
    * BIND 9.10.4-P3 addresses the security issue described in CVE-2016-2776 and addresses an interoperability issue with ECS clients.
    * BIND 9.10.4-P2 addresses the security issue described in CVE-2016-2775.
    * BIND 9.10.4-P1 addresses Windows installation issues, the %z modifier is not supported under Windows and 
      a race condition in the rbt/rbtdb implementation resulting in named exiting due to assertion failures being detected. 
  * Following patches removed, fixed upstream
    * cve-2016-2776.patch
    * cve-2016-8864.patch

-------------------------------------------------------------------
Tue Nov  1 21:24:31 UTC 2016 - psimons@suse.com

- Apply cve-2016-8864.patch to fix CVE-2016-8864 (bsc#1007829).

-------------------------------------------------------------------
Tue Sep 27 16:29:19 UTC 2016 - psimons@suse.com

- Apply cve-2016-2776.patch to fix CVE-2016-2776 (bsc#1000362).

-------------------------------------------------------------------
Thu Jun 16 09:57:29 UTC 2016 - max@suse.com

- Remove the start/stop dependency of named and lwresd on remote-fs
  to break a service dependency cycle (bsc#947483, bsc#963971).
- Make /var/lib/named owned by the named user (bsc#908850,
  bsc#875691).
- Call systemd service macros with the full service name.

-------------------------------------------------------------------
Thu Apr 14 09:56:18 UTC 2016 - lnussel@suse.de

- remove BuildRequire libcap. That is only a legacy library, not
  actually used for building. libcap-devel pulls in the right one.

-------------------------------------------------------------------
Fri Mar 11 13:56:10 UTC 2016 - max@suse.com

- Security update 9.10.3-P4:
  * CVE-2016-1285, bsc#970072: assert failure on input parsing can
    cause premature exit.
  * CVE-2016-1286, bsc#970073: An error when parsing signature
    records for DNAME can lead to named exiting due to an assertion
    failure.
  * CVE-2016-2088, bsc#970074: a deliberately misconstructed packet
    containing multiple cookie options to cause named to terminate
    with an assertion failure.

-------------------------------------------------------------------
Thu Feb 25 16:10:45 UTC 2016 - bwiedemann@suse.com

- drop a changing timestamp making build reproducible

-------------------------------------------------------------------
Fri Feb 12 18:56:28 UTC 2016 - crrodriguez@opensuse.org

- Build with --with-randomdev=/dev/urandom otherwise 
  libisc will use /dev/random to gather entropy and that might
  block, short read etc..

-------------------------------------------------------------------
Wed Jan 20 10:58:15 UTC 2016 - max@suse.com

- Security update 9.10.3-P3:
  * Specific APL data could trigger an INSIST (CVE-2015-8704,
    bsc#962189).
  * Certain errors that could be encountered when printing out or
    logging an OPT record containing a CLIENT-SUBNET option could
    be mishandled, resulting in an assertion failure
    (CVE-2015-8705, bsc#962190).
  * Authoritative servers that were marked as bogus (e.g.
    blackholed in configuration or with invalid addresses) were
    being queried anyway.

-------------------------------------------------------------------
Mon Dec 21 16:55:36 UTC 2015 - max@suse.com

- Update to version 9.10.3-P2 to fix a remote denial of service by
  misparsing incoming responses (CVE-2015-8000, bsc#958861).

-------------------------------------------------------------------
Sun Oct  4 16:57:28 UTC 2015 - jengelh@inai.de

- Avoid double %setup, it confuses some versions of quilt.
- Summary/description update

-------------------------------------------------------------------
Tue Sep 22 13:15:51 UTC 2015 - meissner@suse.com

- Update to version 9.10.2-P4
  * An incorrect boundary boundary check in the OPENPGPKEY
    rdatatype could trigger an assertion failure.
    (CVE-2015-5986) [RT #40286] (bsc#944107)
  * A buffer accounting error could trigger an
    assertion failure when parsing certain malformed 
    DNSSEC keys. (CVE-2015-5722) [RT #40212] (bsc#944066)

-------------------------------------------------------------------
Wed Jul 29 19:24:40 UTC 2015 - lmuelle@suse.com

- Update to version 9.10.2-P3
  Security Fixes
  * A specially crafted query could trigger an assertion failure in message.c.
    This flaw was discovered by Jonathan Foote, and is disclosed in
    CVE-2015-5477. [RT #39795]
  * On servers configured to perform DNSSEC validation, an assertion failure
    could be triggered on answers from a specially configured server.
    This flaw was discovered by Breno Silveira Soares, and is disclosed
    in CVE-2015-4620. [RT #39795]
  Bug Fixes
  * Asynchronous zone loads were not handled correctly when the zone load was
    already in progress; this could trigger a crash in zt.c. [RT #37573]
  * Several bugs have been fixed in the RPZ implementation:
    + Policy zones that did not specifically require recursion could be treated
      as if they did; consequently, setting qname-wait-recurse no; was
      sometimes ineffective. This has been corrected. In most configurations,
      behavioral changes due to this fix will not be noticeable. [RT #39229]
    + The server could crash if policy zones were updated (e.g. via
      rndc reload or an incoming zone transfer) while RPZ processing
      was still ongoing for an active query. [RT #39415]
    + On servers with one or more policy zones configured as slaves, if a
      policy zone updated during regular operation (rather than at startup)
      using a full zone reload, such as via AXFR, a bug could allow the RPZ
      summary data to fall out of sync, potentially leading to an assertion
      failure in rpz.c when further incremental updates were made to the zone,
      such as via IXFR. [RT #39567]
    + The server could match a shorter prefix than what was
      available in CLIENT-IP policy triggers, and so, an unexpected
      action could be taken. This has been corrected. [RT #39481]
    + The server could crash if a reload of an RPZ zone was initiated while
      another reload of the same zone was already in progress. [RT #39649]

-------------------------------------------------------------------
Fri Jul 10 18:02:41 UTC 2015 - lmuelle@suse.com

- Update to version 9.10.2-P2
  - An uninitialized value in validator.c could result in an assertion failure.
    (CVE-2015-4620) [RT #39795]
- Update to version 9.10.2-P1
  - Include client-ip rules when logging the number of RPZ rules of each type.
    [RT #39670]
  - Addressed further problems with reloading RPZ zones. [RT #39649]
  - Addressed a regression introduced in change #4121. [RT #39611]
  - The server could match a shorter prefix than what was available in
    CLIENT-IP policy triggers, and so, an unexpected action could be taken.
    This has been corrected. [RT #39481]
  - On servers with one or more policy zones configured as slaves, if a policy
    zone updated during regular operation (rather than at startup) using a full
    zone reload, such as via AXFR, a bug could allow the RPZ summary data to
    fall out of sync, potentially leading to an assertion failure in rpz.c when
    further incremental updates were made to the zone, such as via IXFR.
    [RT #39567]
  - A bug in RPZ could cause the server to crash if policy zones were updated
    while recursion was pending for RPZ processing of an active query.
    [RT #39415]
  - Fix a bug in RPZ that could cause some policy zones that did not
    specifically require recursion to be treated as if they did; consequently,
    setting qname-wait-recurse no; was sometimes ineffective. [RT #39229]
  - Asynchronous zone loads were not handled correctly when the zone load was
    already in progress; this could trigger a crash in zt.c. [RT #37573]
  - Fix an out-of-bounds read in RPZ code. If the read succeeded, it doesn't
    result in a bug during operation. If the read failed, named could segfault.
    [RT #38559]

-------------------------------------------------------------------
Wed May 13 09:35:40 UTC 2015 - hguo@suse.com

- Fix inappropriate use of /var/lib/named for locating dynamic-DB plugins.
  Dynamic-DB plugins are now loaded from %{_libexecdir}/bind, consistent with
  openSUSE packaging guideline.
- Install additional header files which are helpful to the development of
  dynamic-DB plugins.

-------------------------------------------------------------------
Fri May  8 18:00:41 UTC 2015 - lmuelle@suse.com

- Depend on systemd macros and sysvinit on post-12.3 only.
- Create empty lwresd.conf at build time.
- Reduce file list pre-13.1.

-------------------------------------------------------------------
Fri May  8 15:05:25 UTC 2015 - lmuelle@suse.com

- Update to version 9.10.2
  - Handle timeout in legacy system test. [RT #38573]
  - dns_rdata_freestruct could be called on a uninitialised structure when
    handling a error. [RT #38568]
  - Addressed valgrind warnings. [RT #38549]
  - UDP dispatches could use the wrong pseudorandom
    number generator context. [RT #38578]
  - Fixed several small bugs in automatic trust anchor management, including a
    memory leak and a possible loss of key state information. [RT #38458]
  - 'dnssec-dsfromkey -T 0' failed to add ttl field. [RT #38565]
  - Revoking a managed trust anchor and supplying an untrusted replacement
    could cause named to crash with an assertion failure.
    (CVE-2015-1349) [RT #38344]
  - Fix a leak of query fetchlock. [RT #38454]
  - Fix a leak of pthread_mutexattr_t. [RT #38454]
  - RPZ could send spurious SERVFAILs in response
    to duplicate queries. [RT #38510]
  - CDS and CDNSKEY had the wrong attributes. [RT #38491]
  - adb hash table was not being grown. [RT #38470]
- Update bind.keyring
- Update baselibs.conf due to updates to libdns160 and libisc148

-------------------------------------------------------------------
Fri May  8 11:48:03 UTC 2015 - hguo@suse.com

- Enable export libraries to support plugin development.
  Install DNSSEC root key.
  Expose new interface for developing dynamic zone database.
  + dns_dynamic_db.patch

-------------------------------------------------------------------
Tue Feb 10 22:24:26 UTC 2015 - dvaleev@suse.com

- PowerPC can build shared libraries for sure.
  idnkit-powerpc-ltconfig.patch

-------------------------------------------------------------------
Fri Dec 12 02:28:36 UTC 2014 - jengelh@inai.de

- Explicitly BuildRequire systemd-rpm-macros since it is used
  for lwresd %post etc. Then drop pre-12.x material.
  Remove configure.in.diff2.

-------------------------------------------------------------------
Thu Dec 11 13:03:30 UTC 2014 - jengelh@inai.de

- Corrections to baselibs.conf

-------------------------------------------------------------------
Tue Dec  9 21:45:10 UTC 2014 - lmuelle@suse.com

- Update to version 9.10.1-P1
  - A flaw in delegation handling could be exploited to put named into an
    infinite loop.  This has been addressed by placing limits on the number of
    levels of recursion named will allow (default 7), and the number of
    iterative queries that it will send (default 50) before terminating a
    recursive query (CVE-2014-8500); (bnc#908994).
    The recursion depth limit is configured via the "max-recursion-depth"
    option, and the query limit via the "max-recursion-queries" option.
    [RT #37580]
  - When geoip-directory was reconfigured during named run-time, the
    previously loaded GeoIP data could remain, potentially causing wrong ACLs
    to be used or wrong results to be served based on geolocation
    (CVE-2014-8680). [RT #37720]; (bnc#908995).
  - Lookups in GeoIP databases that were not loaded could cause an assertion
    failure (CVE-2014-8680). [RT #37679]; (bnc#908995).
  - The caching of GeoIP lookups did not always handle address families
    correctly, potentially resulting in an assertion failure (CVE-2014-8680).
    [RT #37672]; (bnc#908995).

-------------------------------------------------------------------
Sun Dec  7 16:54:03 UTC 2014 - jengelh@inai.de

- Convert some hard PreReq to leaner Requires(pre).
- Typographical and orthographic fixes to description texts.

-------------------------------------------------------------------
Fri Dec 05 19:35:00 UTC 2014 - Led <ledest@gmail.com>

- Fix bashisms in the createNamedConfInclude script.
- Post scripts: remove '-e' option of 'echo' that may be unsupported
  in some POSIX-compliant shells.

-------------------------------------------------------------------
Fri Dec  5 14:54:53 UTC 2014 - lmuelle@suse.com

- Add openssl engines to the lwresd chroot.
- Add /etc/lwresd.conf with attribute ghost to the list of files.
- Add /run/lwresd to the list of files of the lwresd package.
- Shift /run/named from the chroot sub to the main bind package.
- Drop /proc from the chroot as multi CPU systems work fine even without it.

-------------------------------------------------------------------
Thu Dec  4 18:36:41 UTC 2014 - lmuelle@suse.com

- Add a versioned dependency when obsoleting packages.

-------------------------------------------------------------------
Thu Dec  4 18:15:01 UTC 2014 - lmuelle@suse.com

- Remove superfluous obsoletes *-64bit in the ifarch ppc64 case; (bnc#437293).

-------------------------------------------------------------------
Wed Dec  3 16:58:24 UTC 2014 - lmuelle@suse.com

- Fix gssapi_krb configure time header detection.

-------------------------------------------------------------------
Sun Nov 30 13:52:44 UTC 2014 - lmuelle@suse.com

- Update root zone (dated Nov 5, 2014).

-------------------------------------------------------------------
Sat Nov 29 19:35:53 UTC 2014 - lmuelle@suse.com

- Update to version 9.10.1
  - This release addresses the security flaws described in CVE-2014-3214 and
    CVE-2014-3859.
- Update to version 9.10.0
  - DNS Response-rate limiting (DNS RRL), which blunts the impact of
    reflection and amplification attacks, is always compiled in and no longer
    requires a compile-time option to enable it.
  - An experimental "Source Identity Token" (SIT) EDNS option is now available.
  - A new zone file format, "map", stores zone data in a
    format that can be mapped directly into memory, allowing
    significantly faster zone loading.
  - "delv" (domain entity lookup and validation) is a new tool with dig-like
    semantics for looking up DNS data and performing internal DNSSEC
    validation.
  - Improved EDNS(0) processing for better resolver performance
    and reliability over slow or lossy connections.
  - Substantial improvement in response-policy zone (RPZ) performance.  Up to
    32 response-policy zones can be configured with minimal performance loss.
  - To improve recursive resolver performance, cache records which are still
    being requested by clients can now be automatically refreshed from the
    authoritative server before they expire, reducing or eliminating the time
    window in which no answer is available in the cache.
  - New "rpz-client-ip" triggers and drop policies allowing
    response policies based on the IP address of the client.
  - ACLs can now be specified based on geographic location using the MaxMind
    GeoIP databases.  Use "configure --with-geoip" to enable.
  - Zone data can now be shared between views, allowing multiple views to serve
    the same zones authoritatively without storing multiple copies in memory.
  - New XML schema (version 3) for the statistics channel includes many new
    statistics and uses a flattened XML tree for faster parsing. The older
    schema is now deprecated.
  - A new stylesheet, based on the Google Charts API, displays XML statistics
    in charts and graphs on javascript-enabled browsers.
  - The statistics channel can now provide data in JSON format as well as XML.
  - New stats counters track TCP and UDP queries received
    per zone, and EDNS options received in total.
  - The internal and export versions of the BIND libraries (libisc, libdns,
    etc) have been unified so that external library clients can use the same
    libraries as BIND itself.
  - A new compile-time option, "configure --enable-native-pkcs11", allows BIND
    9 cryptography functions to use the PKCS#11 API natively, so that BIND can
    drive a cryptographic hardware service module (HSM) directly instead of
    using a modified OpenSSL as an intermediary.
  - The new "max-zone-ttl" option enforces maximum TTLs for zones. This can
    simplify the process of rolling DNSSEC keys by guaranteeing that cached
    signatures will have expired within the specified amount of time.
  - "dig +subnet" sends an EDNS CLIENT-SUBNET option when querying.
  - "dig +expire" sends an EDNS EXPIRE option when querying.
  - New "dnssec-coverage" tool to check DNSSEC key coverage for a zone and
    report if a lapse in signing coverage has been inadvertently scheduled.
  - Signing algorithm flexibility and other improvements
    for the "rndc" control channel.
  - "named-checkzone" and "named-compilezone" can now read
    journal files, allowing them to process dynamic zones.
  - Multiple DLZ databases can now be configured.  Individual zones can be
    configured to be served from a specific DLZ database.  DLZ databases now
    serve zones of type "master" and "redirect".
  - "rndc zonestatus" reports information about a specified zone.
  - "named" now listens on IPv6 as well as IPv4 interfaces by default.
  - "named" now preserves the capitalization of names
    when responding to queries.
  - new "dnssec-importkey" command allows the use of offline
    DNSSEC keys with automatic DNSKEY management.
  - New "named-rrchecker" tool to verify the syntactic
    correctness of individual resource records.
  - When re-signing a zone, the new "dnssec-signzone -Q" option drops
    signatures from keys that are still published but are no longer active.
  - "named-checkconf -px" will print the contents of configuration files with
    the shared secrets obscured, making it easier to share configuration (e.g.
    when submitting a bug report) without revealing private information.
  - "rndc scan" causes named to re-scan network interfaces for
    changes in local addresses.
  - On operating systems with support for routing sockets, network interfaces
    are re-scanned automatically whenever they change.
  - "tsig-keygen" is now available as an alternate command
    name to use for "ddns-confgen".
- Update to version 9.9.6
  New Features
  - Support for CAA record types, as described in RFC 6844 "DNS
    Certification Authority Authorization (CAA) Resource Record",
    was added. [RT#36625] [RT #36737]
  - Disallow "request-ixfr" from being specified in zone statements where it
    is not valid (it is only valid for slave and redirect zones) [RT #36608]
  - Support for CDS and CDNSKEY resource record types was added. For
    details see the proposed Informational Internet-Draft "Automating
    DNSSEC Delegation Trust Maintenance" at
    http://tools.ietf.org/html/draft-ietf-dnsop-delegation-trust-maintainance-14.
    [RT #36333]
  - Added version printing options to various BIND utilities. [RT #26057]
    [RT #10686]
  - Added a "no-case-compress" ACL, which causes named to use case-insensitive
    compression (disabling change #3645) for specified clients. (This is useful
    when dealing with broken client implementations that use case-sensitive
    name comparisons, rejecting responses that fail to match the capitalization
    of the query that was sent.) [RT #35300]
  Feature Changes
  - Adds RPZ SOA to the additional section of responses to clearly
    indicate the use of RPZ in a manner that is intended to avoid
    causing issues for downstream resolvers and forwarders [RT #36507]
  - rndc now gives distinct error messages when an unqualified zone
    name matches multiple views vs. matching no views [RT #36691]
  - Improves the accuracy of dig's reported round trip times.  [RT #36611]
  - When an SPF record exists in a zone but no equivalent TXT record
    does, a warning will be issued.  The warning for the reverse
    condition is no longer issued. See the check-spf option in the
    documentation for details. [RT #36210]
  - "named" will now log explicitly when using rndc.key to configure
    command channel. [RT #35316]
  - The default setting for the -U option (setting the number of UDP
    listeners per interface) has been adjusted to improve performance.
    [RT #35417]
  - Aging of smoothed round-trip time measurements is now limited
    to no more than once per second, to improve accuracy in selecting
    the best name server. [RT #32909]
  - DNSSEC keys that have been marked active but have no publication
    date are no longer presumed to be publishable. [RT #35063]
  Bug Fixes
  - The Makefile in bin/python was changed to work around a bmake
    bug in FreeBSD 10 and NetBSD 6. [RT #36993] (**)
  - Corrected bugs in the handling of wildcard records by the DNSSEC
    validator: invalid wildcard expansions could be treated as valid
    if signed, and valid wildcard expansions in NSEC3 opt-out ranges
    had the AD bit set incorrectly in responses. [RT #37093] [RT #37072]
  - When resigning, dnssec-signzone was removing all signatures from
    delegation nodes. It now retains DS and (if applicable) NSEC
    signatures.  [RT #36946]
  - The AD flag was being set inappopriately on RPZ responses. [RT #36833]
  - Updates the URI record type to current draft standard,
    draft-faltstrom-uri-08, and allows the value field to be zero
    length [RT #36642] [RT #36737]
  - RRSIG sets that were not loaded in a single transaction at start
    up were not being correctly added to re-signing heaps.  [RT #36302]
  - Setting '-t aaaa' in .digrc had unintended side-effects. [RT #36452]
  - A race condition could cause a crash in isc_event_free during
    shutdown.  [RT #36720]
  - Addresses a race condition issue in dispatch. [RT #36731]
  - acl elements could be miscounted, causing a crash while loading
    a config [RT #36675]
  - Corrects a deadlock between view.c and adb.c. [RT #36341]
  - liblwres wasn't properly handling link-local addresses in
    nameserver clauses in resolv.conf. [RT #36039]
  - Buffers in isc_print_vsnprintf were not properly initialized
    leading to potential overflows when printing out quad values.
    [RT #36505]
  - Don't call qsort() with a null pointer, and disable the GCC 4.9
    "delete null pointer check" optimizer option. This fixes problems
    when using GNU GCC 4.9.0 where its compiler code optimizations
    may cause crashes in BIND. For more information, see the operational
    advisory at https://kb.isc.org/article/AA-01167/. [RT #35968]
  - Fixed a bug that could cause repeated resigning of records in
    dynamically signed zones. [RT #35273]
  - Fixed a bug that could cause an assertion failure after forwarding
    was disabled. [RT #35979]
  - Fixed a bug that caused SERVFAILs when using RPZ on a system
    configured as a forwarder. [RT #36060]
  - Worked around a limitation in Solaris's /dev/poll implementation
    that could cause named to fail to start when configured to use
    more sockets than the system could accomodate. [RT #35878]
- Remove merged rpz2+rl-9.9.5.patch and obsoleted rpz2+rl-9.9.5.patch
- Removed pid-path.diff patch as /run/{named,lwresd}/ are used by default.
- Update baselibs.conf (added libirs and library interface version updates).

-------------------------------------------------------------------
Fri Nov 14 09:18:26 UTC 2014 - dimstar@opensuse.org

- No longer perform gpg validation; osc source_validator does it
  implicit:
  + Drop gpg-offline BuildRequires.
  + No longer execute gpg_verify.

-------------------------------------------------------------------
Wed Oct  1 15:26:40 UTC 2014 - jengelh@inai.de

- Implement shlib packaging guidelines and give an improved
  description on the library components
- Put idnkit components in separate packages
- Add runidn.diff to resolve runidn not working at all

-------------------------------------------------------------------
Mon Sep  8 21:10:50 UTC 2014 - werner@suse.de

- Require systemd-rpm-macros at build

-------------------------------------------------------------------
Mon Sep  8 14:00:01 UTC 2014 - werner@suse.de

- Use the systemd service macros to make sure init scripts are
  registered properly (bnc#894627)

-------------------------------------------------------------------
Wed Sep  3 11:38:47 UTC 2014 - max@suse.com

- Version 9.9.5P1 also fixes a problem with zone transfers on
  multicore machines (bnc#882511).

-------------------------------------------------------------------
Thu Jul 31 21:40:49 UTC 2014 - lmuelle@suse.com

- Package dnssec-checkds and dnssec-coverage binaries and man pages only on
  post-11.1 systems.

-------------------------------------------------------------------
Thu Jul 31 17:20:38 UTC 2014 - lmuelle@suse.com

- Update to version 9.9.5P1
  Various bugfixes and some feature fixes. (see CHANGES files)
  Security and maintenance issues:

- [bug] Don't call qsort with a null pointer. [RT #35968]
  - [bug] Disable GCC 4.9 "delete null pointer check". [RT #35968]
  - [port] linux: libcap support: declare curval at start of block. [RT #35387]

- Update to version 9.9.5
  - [bug] Address double dns_zone_detach when switching to using automatic
    empty zones from regular zones. [RT #35177]
  - [port] Use built-in versions of strptime() and timegm() on all platforms
    to avoid portability issues. [RT #35183]
  - [bug] Address a portentry locking issue in dispatch.c. [RT #35128]
  - [bug] irs_resconf_load now returns ISC_R_FILENOTFOUND on a missing
    resolv.conf file and initializes the structure as if it had been
    configured with  nameserver ::1 nameserver 127.0.0.1  [RT #35194]
  - [contrib] queryperf: Fixed a possible integer overflow when printing
    results. [RT #35182]
  - [protocol] Accept integer timestamps in RRSIG records. [RT #35185]
  - [func] named-checkconf can now obscure shared secrets when printing by
    specifying '-x'. [RT #34465]
  - [bug] Improvements to statistics channel XSL stylesheet: the stylesheet can
    now be cached by the browser; section headers are omitted from the stats
    display when there is no data in those sections to be displayed; counters
    are now right-justified for easier readability. (Only available with
    configure --enable-newstats.) [RT #35117]
  - [cleanup] Replaced all uses of memcpy() with memmove(). [RT #35120]
  - [bug] Handle "." as a search list element when IDN support is enabled.
    [RT #35133]
  - [bug] dig failed to handle AXFR style IXFR responses which span multiple
    messages. [RT #35137]
  - [bug] Address a possible race in dispatch.c. [RT #35107]
  - [bug] Warn when a key-directory is configured for a zone, but does not
    exist or is not a directory. [RT #35108]
  - [security] memcpy was incorrectly called with overlapping ranges resulting
    in malformed names being generated on some platforms.  This could cause
    INSIST failures when serving NSEC3 signed zones (CVE-2014-0591).
    [RT #35120]
  - [bug] Two calls to dns_db_getoriginnode were fatal if there was no data at
    the node. [RT #35080]
  - [bug] Iterative responses could be missed when the source port for an
    upstream query was the same as the listener port (53). [RT #34925]
  - [bug] Fixed a bug causing an insecure delegation from one static-stub zone
    to another to fail with a broken trust chain. [RT #35081]
  - [bug] loadnode could return a freed node on out of memory. [RT #35106]
  - [bug] Address null pointer dereference in zone_xfrdone. [RT #35042]
  - [func] "dnssec-signzone -Q" drops signatures from keys that are still
    published but no longer active. [RT #34990]
  - [bug] "rndc refresh" didn't work correctly with slave zones usingi
    inline-signing. [RT #35105]
  - [cleanup] Add a more detailed "not found" message to rndc commands which
    specify a zone name. [RT #35059]
  - [bug] Correct the behavior of rndc retransfer to allow inline-signing slave
    zones to retain NSEC3 parameters instead of reverting to NSEC. [RT #34745]
  - [port] Update the Windows build system to support feature selection and
    WIN64 builds.  This is a work in progress. [RT #34160]
  - [bug] dig could fail to clean up TCP sockets still waiting on connect().
    [RT #35074]
  - [port] Update config.guess and config.sub. [RT #35060]
  - [bug] 'nsupdate' leaked memory if 'realm' was used multiple times.
    [RT #35073]
  - [bug] "named-checkconf -z" now checks zones of type hint and redirect as
    well as master. [RT #35046]
  - [misc] Provide a place for third parties to add version information for
    their extensions in the version file by setting the EXTENSIONS variable.
  - [bug] RPZ zeroed ttls if the query type was '*'. [RT #35026]
  - [func] Local address can now be specified when using dns_client API.
    [RT #34811]
  - [bug] Don't allow dnssec-importkey overwrite a existing non-imported
    private key.
  - [bug] Address read after free in server side of lwres_getrrsetbyname.
    [RT #29075]
  - [bug] Fix cast in lex.c which could see 0xff treated as eof. [RT #34993]
  - [bug] Failure to release lock on error in receive_secure_db. [RT #34944]
  - [bug] Updated OpenSSL PKCS#11 patches to fix active list locking and other
    bugs. [RT #34855]
  - [bug] Address bugs in dns_rdata_fromstruct and dns_rdata_tostruct for WKS
    and ISDN types. [RT #34910]
  - [bug] 'host' could die if a UDP query timed out. [RT #34870]
  - [bug] Address lock order reversal deadlock with inline zones. [RT #34856]
  - [cleanup] Changed the name of "isc-config.sh" to "bind9-config".
    [RT #23825]
  - [port] linux: Address platform specific compilation issue when libcap-devel
    is installed. [RT #34838]
  - [port] Some readline clones don't accept NULL pointers when calling
    add_history. [RT #34842]
  - [cleanup] Simplify TCP message processing when requesting a zone transfer.
    [RT #34825]
  - [bug] Address race condition with manual notify requests. [RT #34806]
  - [func] Create delegations for all "children" of empty zones except
    "forward first". [RT #34826]
  - [tuning] Adjust when a master server is deemed unreachable. [RT #27075]
  - [tuning] Use separate rate limiting queues for refresh and notify
    requests. [RT #30589]
  - [cleanup] Include a comment in .nzf files, giving the name of the
    associated view. [RT #34765]
  - [bug] Address a race condition when shutting down a zone. [RT #34750]
  - [bug] Journal filename string could be set incorrectly, causing garbage in
    log messages. [RT #34738]
  - [protocol] Use case sensitive compression when responding to queries.
    [RT #34737]
  - [protocol] Check that EDNS subnet client options are well formed.
    [RT #34718]
  - [func] Allow externally generated DNSKEY to be imported into the DNSKEY
    management framework.  A new tool dnssec-importkey is used to do this.
    [RT #34698]
  - [bug] Handle changes to sig-validity-interval settings better. [RT #34625]
  - [bug] ndots was not being checked when searching.  Only continue searching
    on NXDOMAIN responses.  Add the ability to specify ndots to nslookup.
    [RT #34711]
  - [bug] Treat type 65533 (KEYDATA) as opaque except when used in a key zone.
    [RT #34238]
- Updated to current rpz patch from·http://ss.vix.su/~vjs/rrlrpz.html
  - rpz2-9.9.4.patch
  + rpz2+rl-9.9.5.patch

-------------------------------------------------------------------
Sun Jun  1 13:30:10 UTC 2014 - chris@computersalat.de

- add stuff for DNSSEC validation to named.conf
  * dnssec-enable, dnssec-validation

-------------------------------------------------------------------
Sun May 25 17:24:21 UTC 2014 - crrodriguez@opensuse.org

- Build with LFS_CFLAGS in 32 bit systems.

-------------------------------------------------------------------
Thu May  8 11:23:47 CEST 2014 - ro@suse.de

- use %_rundir macro

-------------------------------------------------------------------
Fri Mar 28 20:49:57 CET 2014 - lchiquitto@suse.de

- Remove obsolete patch "workaround-compile-problem.diff"

-------------------------------------------------------------------
Fri Jan 24 10:12:56 UTC 2014 - max@suse.com

- Add the sdb-ldap backend module (fate#313216).
- Details can be found here:
  * http://bind9-ldap.bayour.com/
  * http://bind9-ldap.bayour.com/dnszonehowto.html

-------------------------------------------------------------------
Tue Jan 21 17:02:30 UTC 2014 - max@suse.com

- Update to version 9.9.4P2
  * Fixes named crash when handling malformed NSEC3-signed zones
    (CVE-2014-0591, bnc#858639)
  * Obsoletes workaround-compile-problem.diff
- Replace rpz2+rl-9.9.3-P1.patch by rpz2-9.9.4.patch, rl is now
  supported upstream (--enable-rrl).

-------------------------------------------------------------------
Mon Dec  9 12:16:42 UTC 2013 - max@suse.com

- Fix generation of /etc/named.conf.include
  (bnc#828678, bnc#848777, bnc#814978).

-------------------------------------------------------------------
Wed Aug  7 15:19:10 UTC 2013 - max@suse.com

- Systemd doesn't set $TERM, and hence breaks tput (bnc#823175).

-------------------------------------------------------------------
Tue Aug  6 10:09:22 UTC 2013 - max@suse.com

- Improve pie_compile.diff (bnc#828874).
- dnssec-checkds and dnssec-coverage need python-base.
- disable rpath in libtool.

-------------------------------------------------------------------
Mon Aug  5 14:50:20 UTC 2013 - max@suse.com

- Update to 9.9.3P2 fixes CVE-2013-4854, bnc#831899.
  * Incorrect bounds checking on private type 'keydata' can lead
    to a remotely triggerable REQUIRE failure.

-------------------------------------------------------------------
Wed Jul 24 15:37:09 UTC 2013 - max@suse.com

- Remove non-working apparmor profiles (bnc#740327).

-------------------------------------------------------------------
Wed Jul 17 14:09:02 CEST 2013 - mls@suse.de

- the README file is not a directory, drop the dir attribute

-------------------------------------------------------------------
Mon Jun 24 13:17:11 UTC 2013 - meissner@suse.com

- Updated to 9.9.3-P1
  Various bugfixes and some feature fixes. (see CHANGES files)
  Security and maintenance issues:

-	[security]	Caching data from an incompletely signed zone could
			trigger an assertion failure in resolver.c [RT #33690]
  -	[security]	Support NAPTR regular expression validation on
			all platforms without using libregex, which
			can be vulnerable to memory exhaustion attack
			(CVE-2013-2266). [RT #32688]
  -	[security]	RPZ rules to generate A records (but not AAAA records)
			could trigger an assertion failure when used in
			conjunction with DNS64 (CVE-2012-5689). [RT #32141]
  -	[bug]		Fixed several Coverity warnings.
			Note: This change includes a fix for a bug that
			was subsequently determined to be an exploitable
			security vulnerability, CVE-2012-5688: named could
			die on specific queries with dns64 enabled.
			[RT #30996]

-	[maint]		Added AAAA for D.ROOT-SERVERS.NET.
  -	[maint]		D.ROOT-SERVERS.NET is now 199.7.91.13.
- Updated to current rate limiting + rpz patch from
  http://ss.vix.su/~vjs/rrlrpz.html
- moved dnssec-* helpers to bind-utils package. bnc#813911

-------------------------------------------------------------------
Wed May  8 08:21:52 UTC 2013 - schwab@suse.de

- Use updated config.guess/sub in the embedded idnkit sources

-------------------------------------------------------------------
Wed Mar 27 12:33:34 UTC 2013 - meissner@suse.com

- Updated to 9.9.2-P2 (bnc#811876)
  Fix for: https://kb.isc.org/article/AA-00871 CVE-2013-2266

* Security Fixes
    Removed the check for regex.h in configure in order to disable regex
    syntax checking, as it exposes BIND to a critical flaw in libregex
    on some platforms. [RT #32688]

- added gpg key source verification

-------------------------------------------------------------------
Thu Dec  6 08:00:31 UTC 2012 - meissner@suse.com

- Updated to 9.9.2-P1 (bnc#792926)
  https://kb.isc.org/article/AA-00828
  * Security Fixes

Prevents named from aborting with a require assertion failure on
    servers with DNS64 enabled.  These crashes might occur as a result of
    specific queries that are received.  (Note that this fix is a subset
    of a series of updates that will be included in full in BIND 9.8.5
    and 9.9.3 as change #3388, RT #30996).  [CVE-2012-5688] [RT #30792]

A deliberately constructed combination of records could cause
    named to hang while populating the additional section of a
    response. [CVE-2012-5166] [RT #31090]

Prevents a named assert (crash) when queried for a record whose
    RDATA exceeds 65535 bytes.  [CVE-2012-4244]  [RT #30416]

Prevents a named assert (crash) when validating caused by using
    "Bad cache" data before it has been initialized. [CVE-2012-3817]
    [RT #30025]

A condition has been corrected where improper handling of zero-length
    RDATA could cause undesirable behavior, including termination of
    the named process. [CVE-2012-1667]  [RT #29644]

ISC_QUEUE handling for recursive clients was updated to address a race
    condition that could cause a memory leak. This rarely occurred with
    UDP clients, but could be a significant problem for a server handling
    a steady rate of TCP queries. [CVE-2012-3868]  [RT #29539 & #30233]

New Features

Elliptic Curve Digital Signature Algorithm keys and signatures in
    DNSSEC are now supported per RFC 6605. [RT #21918]

Introduces a new tool "dnssec-checkds" command that checks a zone to
    determine which DS records should be published in the parent zone,
    or which DLV records should be published in a DLV zone, and queries
    the DNS to ensure that it exists. (Note: This tool depends on python;
    it will not be built or installed on systems that do not have a
    python interpreter.)  [RT #28099]

Introduces a new tool "dnssec-verify" that validates a signed zone,
    checking for the correctness of signatures and NSEC/NSEC3 chains.
    [RT #23673]

Adds configuration option "max-rsa-exponent-size <value>;" that
    can be used to specify the maximum rsa exponent size that will be
    accepted when validating [RT #29228]

Feature Changes

Improves OpenSSL error logging [RT #29932]
    nslookup now returns a nonzero exit code when it is unable to get
    an answer.  [RT #29492]

Bug Fixes

Uses binary mode to open raw files on Windows.  [RT #30944]
    When using DNSSEC inline signing with "rndc signing -nsec3param", a
    salt value of "-" can now be used to indicate 'no salt'.  [RT #30099]
    Prevents race conditions (address use after free) that could be
    encountered when named is shutting down and releasing structures
    used to manage recursive clients.  [RT #30241]
    Static-stub zones now accept "forward" and "fowarders" options
    (often needed for subdomains of the zone referenced to override
    global forwarding options).  These options are already available
    with traditional stub zones and their omission from zones of type
    "static-stub" was an inadvertent oversight. [RT #30482]
    Limits the TTL of signed RRsets in cache when their RRSIGs are
    approaching expiry. This prevents the persistence in cache of
    invalid RRSIGs in order to assist recovery from a situation where
    zone re-signing doesn't occur in a timely manner.   With this change,
    named will attempt to obtain new RRSIGs from the authoritative server
    once the original ones have expired, and even if the TTL of the old
    records would in other circumstances cause them to be kept in cache
    for longer.  [RT #26429]
    Corrects the syntax of isc_atomic_xadd() and isc_atomic_cmpxchg()
    which are employed on Itanium systems to speed up lock management
    by making use of atomic operations.  Without the syntax correction
    it is possible that concurrent access to the same structures could
    accidentally occur with unpredictable results.  [RT #25181]
    Improves OpenSSL error logging [RT #29932]
    The configure script now supports and detects libxml2-2.8.x correctly
    [RT #30440]
    The host command should no longer assert on some architectures
    and builds while handling the time values used with the -w (wait
    forever) option.  [RT #18723]
    Invalid zero settings for max-retry-time, min-retry-time,
    max-refresh-time, min-refresh-time will now be detected during parsing
    of named.conf and an error emitted instead of triggering an assertion
    failure on startup.  [RT #27730]
    Removes spurious newlines from log messages in zone.c [RT #30675]
    When built with readline support (i.e. on a system with readline
    installed) nsupdate no longer terminates unexpectedly in interactive
    mode. [RT #29550]
    All named tasks that perform task-exclusive operations now share the
    same single task.  Prior to this change, there was the possibility of
    a race condition between rndc operations and other functions such as
    re-sizing the adb hash table.  If the race condition was encountered,
    named would in most cases terminate unexpectedly with an assert.
    [RT #29872]
    Ensures that servers are expired from the ADB cache when the timeout
    limit is reached so that their learned attributes can be refreshed.
    Prior to this change, servers that were frequently queried might
    never have their entries removed and reinitialized.  This is of
    particular importance to DNSSEC-validating recursive servers that
    might erroneously set "no-edns" for an authoritative server following
    a period of intermittent connectivity. [RT #29856]
    Adds additional resilience to a previous security change (3218) by
    preventing RRSIG data from being added to cache when a pseudo-record
    matching the covering type and proving non-existence exists at a
    higher trust level. The earlier change prevented this inconsistent
    data from being retrieved from cache in response to client queries  -
    with this additional change, the RRSIG records are no longer inserted
    into cache at all. [RT #26809]
    dnssec-settime will now issue a warning when the writing of a new
    private key file would cause a change in the permissions of the
    existing file. [RT #27724]
    Fixes the defect introduced by change #3314 that was causing failures
    when saving stub zones to disk (resulting in excessive CPU usage in
    some cases).  [RT #29952]
    Address race condition in units tests: asyncload_zone and
    asyncload_zt. [RT #26100]
    It is now possible to using multiple control keys again - this
    functionality was inadvertently broken by change #3924 (RT #28265)
    which addressed a memory leak. [RT #29694]
    Named now holds a zone table reference while performing an
    asynchronous load of a zone.  This removes a race condition that
    could cause named to crash when zones are added using rndc addzone
    or by manually editing named's configuration file followed by rndc
    reconfig/reload. [RT #28326]
    Setting resolver-query-timeout too low could cause named problems
    recovering after a loss of connectivity.  [RT #29623]
    Reduces the potential build-up of stale RRsets in cache on a busy
    recursive nameserver by re-using cached DS and RRSIG rrsets when
    possible [RT #29446]
    Corrects a failure to authenticate non-existence of resource records
    in some circumstances when RPZ has been configured.  Also:
        adds an optional "recursive-only yes|no" to the response-policy
        statement
        adds an optional "max-policy-ttl" to the response-policy statement
        to limit the false data that "recursive-only no" can introduce
        into resolvers' caches
        introduces a predefined encoding of PASSTHRU policy by adding
        "rpz-passthru" to be used as the target of CNAME policy records
        (the old encoding is still accepted.)
        adds a RPZ performance test to bin/tests/system/rpz when queryperf is available.  [RT #26172]
    Upper-case/lower-case handling of RRSIG signer-names is now handled
    consistently: RRSIG records are generated with the signer-name in
    lower case. They are accepted with any case, but if they fail to
    validate, we try again in lower case. [RT #27451]

-------------------------------------------------------------------
Sun Nov 18 18:12:08 UTC 2012 - meissner@suse.com

- added a ratelimiting (draft RFC) patch from Paul Vixie.
  see http://www.redbarn.org/dns/ratelimits
  suggested by Stefan Schaefer <stefan@invis-server.org>

-------------------------------------------------------------------
Wed Nov 14 10:24:42 UTC 2012 - meissner@suse.com

- updated to 9.9.2
  https://kb.isc.org/article/AA-00798

Security:
  * A deliberately constructed combination of records could cause
    named to hang while populating the additional section of a
    response. [CVE-2012-5166] [RT #31090]
  * Prevents a named assert (crash) when queried for a record whose
    RDATA exceeds 65535 bytes.  [CVE-2012-4244]  [RT #30416]
  * Prevents a named assert (crash) when validating caused by using "Bad
    cache" data before it has been initialized. [CVE-2012-3817]  [RT #30025]
  * A condition has been corrected where improper handling of zero-length
    RDATA could cause undesirable behavior, including termination of the
    named process. [CVE-2012-1667]  [RT #29644]
  * ISC_QUEUE handling for recursive clients was updated to address a race
    condition that could cause a memory leak. This rarely occurred with
    UDP clients, but could be a significant problem for a server handling
    a steady rate of TCP queries. [CVE-2012-3868]  [RT #29539 & #30233]

New Features

* Elliptic Curve Digital Signature Algorithm keys and signatures in
    DNSSEC are now supported per RFC 6605. [RT #21918]
  * Introduces a new tool "dnssec-checkds" command that checks a zone
    to determine which DS records should be published in the parent zone,
    or which DLV records should be published in a DLV zone, and queries
    the DNS to ensure that it exists. (Note: This tool depends on python;
    it will not be built or installed on systems that do not have a python
    interpreter.)  [RT #28099]
  * Introduces a new tool "dnssec-verify" that validates a signed zone,
    checking for the correctness of signatures and NSEC/NSEC3 chains.
    [RT #23673]
  * Adds configuration option "max-rsa-exponent-size <value>;" that can
    be used to specify the maximum rsa exponent size that will be accepted
    when validating [RT #29228]

Feature Changes

* Improves OpenSSL error logging [RT #29932]
  * nslookup now returns a nonzero exit code when it is unable to get an answer.  [RT #29492]

Lots of bugfixes.
- unfuzzed patches:
  perl-path.diff
  pie_compile.diff
  workaround-compile-problem.diff

-------------------------------------------------------------------
Fri Oct 19 12:11:55 UTC 2012 - meissner@suse.com

- Specially crafted DNS data can cause a lockup in named.
  CVE-2012-5166, bnc#784602.
- 9.9.1-P4

-------------------------------------------------------------------
Sat Sep 15 16:20:32 UTC 2012 - meissner@suse.com

- Named could die on specially crafted record.
  [RT #30416] (bnc#780157) CVE-2012-4244
- 9.9.1-P3
- updated dnszone-schema.txt from upstream.

-------------------------------------------------------------------
Thu Jul 26 11:08:11 CEST 2012 - ug@suse.de

- Prevents a named assert (crash) when validating caused by using
  "Bad cache" data before it has been initialized.  [RT #30025]
  (bnc#772945)

- ISC_QUEUE handling for recursive clients was updated to address a
  race condition that could cause a memory leak.  This rarely occurred
  with UDP clients, but could be a significant problem for a server
  handling a steady rate of TCP queries.  [RT #29539 & #30233]

- Under heavy incoming TCP query loads named could experience a
  memory leak which could lead to significant reductions in query
  response or cause the server to be terminated on systems with
  "out of memory" killers. [RT #29539]
  (bnc#772946)

- A condition has been corrected where improper handling of zero-length
  RDATA could cause undesirable behavior, including termination of
  the named process.  [RT #29644]
- 9.9.1-P2

-------------------------------------------------------------------
Thu Jul 12 07:34:11 UTC 2012 - cfarrell@suse.com

- license update: ISC
  ISC is generally seen as the correct license for bind

-------------------------------------------------------------------
Tue Jun  5 16:30:32 CEST 2012 - ug@suse.de

- updated dnszone-schema.txt

-------------------------------------------------------------------
Mon Jun  4 17:25:27 CEST 2012 - ug@suse.de

- VUL-0: bind remote DoS via zero length rdata field
  CVE-2012-1667
  bnc#765315
- 9.9.1-P1

-------------------------------------------------------------------
Tue May 22 10:04:42 CEST 2012 - ug@suse.de

- this version has no new features but only bugfixes
- Addresses a race condition that can cause named to to crash when
  the masters list for a zone is updated via rndc reload/reconfig
- Fixes a race condition in zone.c that can cause named to crash
  during the processing of rndc delzone
- Prevents a named segfault from resolver.c due to procedure
  fctx_finddone() not being thread-safe
- SDB now handles unexpected errors from back-end database drivers
  gracefully instead of exiting on an assert.
- Prevents named crashes as a result of dereferencing a NULL pointer
  in zmgr_start_xfrin_ifquota if the zone was being removed while
  there were zone transfers still pending
- Corrects a parser bug that could cause named to crash while
  reading a malformed zone file
- many more smaller fixes
- version 9.9.1

-------------------------------------------------------------------
Thu May 10 13:44:54 CEST 2012 - ug@suse.de

- added patch to fix an assertion failure

-------------------------------------------------------------------
Fri May  4 17:01:24 CEST 2012 - ug@suse.de

- many dnssec fixes and features (too many to list them
  here, check the changelog)
- improved startup time
- improved scalability
- Added support for Uniform Resource Identifier (URI) resource
  records
- Local copies of slave zones are now saved in raw format by
  default to improve startup performance
  BIND 9.9 changes the default storage format for slave zone
  files from text to raw.  Because named's behavior when a slave
  server cannot read or parse a zone file is to move the offending
  file out of the way and retransfer the zone, slave servers
  that are updated from a pre-9.9.0 version of BIND and which
  have existing copies of slave zone data may wind up with
  extraneous copies of zone data stored, as the existing
  text-format zone file copies will be moved aside to filenames
  of the format db-###### and journal files to the format
  jn-######  (where # represents a hexadecimal digit.)
- many many bugfixes. Please read changelog for details
- fixed handling of TXT records in ldapdump
  (bnc#743758)
- 9.9.0

-------------------------------------------------------------------
Mon Feb 13 10:44:33 UTC 2012 - coolo@suse.com

- patch license to follow spdx.org standard

-------------------------------------------------------------------
Wed Dec 21 22:16:02 UTC 2011 - lars@samba.org

- Ensure to create the required dir or sym link in /var/run; (bnc#738156).

-------------------------------------------------------------------
Mon Dec  5 16:47:48 CET 2011 - ug@suse.de

- root nameserver updated (root.hint file)

-------------------------------------------------------------------
Mon Dec  5 12:55:15 CET 2011 - ug@suse.de

- added managed-keys-directory to named.conf

-------------------------------------------------------------------
Tue Nov 22 11:37:01 CET 2011 - ug@suse.de

- fixed apparmor profile for lib and lib64 in chroot
  (bnc#716745)

-------------------------------------------------------------------
Thu Nov 17 15:25:54 CET 2011 - fteodori@suse.de

- Cache lookup could return RRSIG data associated with nonexistent
  records, leading to an assertion failure. CVE-2011-4313; (bnc#730995).

-------------------------------------------------------------------
Wed Oct 26 11:14:43 CEST 2011 - ug@suse.de

- on a 64bit system a chrooted bind failed to start if 32bit
  libs were installed (bnc#716745)

-------------------------------------------------------------------
Fri Sep 30 20:07:45 UTC 2011 - coolo@suse.com

- add libtool as buildrequire to make the spec file more reliable

-------------------------------------------------------------------
Sat Sep 17 19:36:58 UTC 2011 - jengelh@medozas.de

- Remove redundant tags/sections from specfile
- Use %_smp_mflags for parallel build

-------------------------------------------------------------------
Fri Sep 16 15:48:23 CEST 2011 - ug@suse.de

- very first restart can create broken chroot
  (bnc#718441)

-------------------------------------------------------------------
Mon Sep  5 11:41:49 CEST 2011 - ug@suse.de

* fixed SSL in chroot environment (bnc#715881)

-------------------------------------------------------------------
Mon Sep  5 10:19:34 CEST 2011 - ug@suse.de

* Added a new include file with function typedefs for the DLZ
  "dlopen" driver. [RT #23629]
* Added a tool able to generate malformed packets to allow testing of
  how named handles them. [RT #24096]
* The root key is now provided in the file bind.keys allowing DNSSEC
  validation to be switched on at start up by adding
  "dnssec-validation auto;" to named.conf. If the root key provided
  has expired, named will log the expiration and validation will not
  work. More information and the most current copy of bind.keys can
  be found at http://www.isc.org/bind-keys. *Please note this feature
  was actually added in 9.8.0 but was not included in the 9.8.0
  release notes. [RT #21727]
* If named is configured with a response policy zone (RPZ) and a
  query of type RRSIG is received for a name configured for RRset
  replacement in that RPZ, it will trigger an INSIST and crash the
  server. RRSIG. [RT #24280]
* named, set up to be a caching resolver, is vulnerable to a user
  querying a domain with very large resource record sets (RRSets)
  when trying to negatively cache the response. Due to an off-by-one
  error, caching the response could cause named to crash. [RT #24650]
  [CVE-2011-1910]
* Using Response Policy Zone (RPZ) to query a wildcard CNAME label
  with QUERY type SIG/RRSIG, it can cause named to crash. Fix is
  query type independant. [RT #24715]
* Using Response Policy Zone (RPZ) with DNAME records and querying
  the subdomain of that label can cause named to crash. Now logs that
  DNAME is not supported. [RT #24766]
* Change #2912 populated the message section in replies to UPDATE
  requests, which some Windows clients wanted. This exposed a latent
  bug that allowed the response message to crash named. With this
  fix, change 2912 has been reduced to copy only the zone section to
  the reply. A more complete fix for the latent bug will be released
  later. [RT #24777]
* many bugfixes (see CHANGELOG)
* 9.8.1

-------------------------------------------------------------------
Wed Aug 31 09:36:54 UTC 2011 - rhafer@suse.de

- Fixed the ldapdump tool to also respect the "uri" setting in
  /etc/openldap/ldap.conf (bnc#710430)

-------------------------------------------------------------------
Tue Jul  5 15:24:10 CEST 2011 - ug@suse.de

* Using Response Policy Zone (RPZ) with DNAME records and querying
  the subdomain of that label can cause named to crash. Now logs that
  DNAME is not supported. [RT #24766]
* If named is configured to be both authoritative and resursive and
  receives a recursive query for a CNAME in a zone that it is
  authoritative for, if that CNAME also points to a zone the server
  is authoritative for, the recursive part of name will not follow
  the CNAME change and the response will not be a complete CNAME
  chain. [RT #24455]
* Using Response Policy Zone (RPZ) to query a wildcard CNAME label
  with QUERY type SIG/RRSIG, it can cause named to crash. Fix is
  query type independant. [RT #24715] [CVE-2011-1907]
* Change #2912 (see CHANGES) exposed a latent bug in the DNS message
  processing code that could allow certain UPDATE requests to crash
  named. This was fixed by disambiguating internal database
  representation vs DNS wire format data. [RT #24777] [CVE-2011-2464]
* 9.8.0-P4

-------------------------------------------------------------------
Tue Jun  7 16:37:56 CEST 2011 - ug@suse.de

- A large RRSET from a remote authoritative server that results in
  the recursive resolver trying to negatively cache the response can
  hit an off by one code error in named, resulting in named crashing.
  [RT #24650] [CVE-2011-1910]
- Zones that have a DS record in the parent zone but are also listed
  in a DLV and won't validate without DLV could fail to validate. [RT
  #24631]

-------------------------------------------------------------------
Mon May 23 19:55:15 UTC 2011 - crrodriguez@opensuse.org

- Build with -DNO_VERSION_DATE to avoid timestamps in binaries.

-------------------------------------------------------------------
Thu May 19 11:52:49 CEST 2011 - meissner@suse.de

- buildreq update-desktop-files for newer rpms

-------------------------------------------------------------------
Thu May  5 16:59:49 CEST 2011 - ug@suse.de

- The ADB hash table stores informations about which authoritative
  servers to query about particular domains
- BIND now supports a new zone type, static-stub
- BIND now supports Response Policy Zones
- BIND 9.8.0 now has DNS64 support
- Dynamically Loadable Zones (DLZ) now support dynamic updates.
- Added a "dlopen" DLZ driver, allowing the creation of external DLZ
  drivers that can be loaded as shared objects at runtime rather than
  having to be linked with named
- named now retains GSS-TSIG keys across restarts
- There is a new update-policy match type "external".
- bugfixes
- version to 9.8.0

-------------------------------------------------------------------
Thu Feb 24 11:14:09 CET 2011 - ug@suse.de

- fixed security issue
  VUL-0: bind: IXFR or DDNS update combined with high query rate
  DoS vulnerability (CVE-2011-0414 bnc#674431)
- version to 9.7.3

-------------------------------------------------------------------
Wed Jan  5 16:58:06 CET 2011 - meissner@suse.de

- ifdef the sysvinit specific prereqs for openSUSE 11.4 and later

-------------------------------------------------------------------
Thu Dec  9 15:21:15 UTC 2010 - mvyskocil@suse.cz

- fix bnc#656509 - direct mount of /proc in chroot

-------------------------------------------------------------------
Tue Dec  7 22:04:48 UTC 2010 - coolo@novell.com

- prereq init scripts syslog and network

-------------------------------------------------------------------
Thu Dec  2 17:38:44 CET 2010 - ug@suse.de

- fixed VUL-0: bind: Key algorithm rollover bug
  bnc#657102, CVE-2010-3614
- fixed VUL-0: bind: allow-query processed incorrectly
  bnc#657120, CVE-2010-3615
- fixed VUL-0: bind: cache incorrectly allows a ncache entry and a rrsig for the same type
  bnc#657129, CVE-2010-3613

-------------------------------------------------------------------
Tue Nov 23 14:38:49 CET 2010 - ug@suse.de

- fixed return code of "rcnamed status"
- added gssapi support

-------------------------------------------------------------------
Tue Oct 12 13:53:16 CEST 2010 - ug@suse.de

- Zones may be dynamically added and removed with the "rndc addzone"
  and "rndc delzone" commands. These dynamically added zones are
  written to a per-view configuration file. Do not rely on the
  configuration file name nor contents as this will change in a
  future release. This is an experimental feature at this time.
- Added new "filter-aaaa-on-v4" access control list to select which
  IPv4 clients have AAAA record filtering applied.
- A new command "rndc secroots" was added to dump a combined summary
  of the currently managed keys combined with statically configured
  trust anchors.
- Added support to load new keys into managed zones without signing
  immediately with "rndc loadkeys". Added support to link keys with
  "dnssec-keygen -S" and "dnssec-settime -S".
- Documentation improvements
- ORCHID prefixes were removed from the automatic empty zone list.
- Improved handling of GSSAPI security contexts. Specifically, better
  memory management of cached contexts, limited lifetime of a context
  to 1 hour, and added a "realm" command to nsupdate to allow
  selection of a non-default realm name.
- The contributed tool "ztk" was updated to version 1.0.

- version 9.7.1 to 9.7.2-P2

-------------------------------------------------------------------
Mon Jul 26 15:33:02 CEST 2010 - ug@suse.de

- chrooted bind failed to start (bnc#625019)

-------------------------------------------------------------------
Mon Jun 21 12:43:15 CEST 2010 - ug@suse.de

- genrandom: add support for the generation of multiple
  files.
- Update empty-zones list to match
  draft-ietf-dnsop-default-local-zones-13.
- Incrementally write the master file after performing
  a AXFR.
- Add AAAA address for L.ROOT-SERVERS.NET.
- around 50 bugs fixed (see CHANGELOG for details)
- version 9.7.1

-------------------------------------------------------------------
Thu May 20 10:10:13 CEST 2010 - ug@suse.de

- Handle broken DNSSEC trust chains better. [RT #15619]
- Named could return SERVFAIL for negative responses
  from unsigned zones. [RT #21131
- version 9.7.0-P2

-------------------------------------------------------------------
Sat May  1 12:18:57 UTC 2010 - aj@suse.de

- Handle /var/run on tmpfs.
- do not use run_ldconfig.

-------------------------------------------------------------------
Wed Feb 24 18:30:08 UTC 2010 - jengelh@medozas.de

- Enable DLZ-LDAP (supersedes sdb_ldap) and add a patch

-------------------------------------------------------------------
Wed Feb 17 12:27:56 CET 2010 - ug@suse.de

- Fully automatic signing of zones by "named".
- Simplified configuration of DNSSEC Lookaside Validation (DLV).
- Simplified configuration of Dynamic DNS, using the "ddns-confgen"
  command line tool or the "local" update-policy option.  (As a side
  effect, this also makes it easier to configure automatic zone
  re-signing.)
- New named option "attach-cache" that allows multiple views to
  share a single cache.
- DNS rebinding attack prevention.
- New default values for dnssec-keygen parameters.
- Support for RFC 5011 automated trust anchor maintenance
- Smart signing: simplified tools for zone signing and key
  maintenance.
- The "statistics-channels" option is now available on Windows.
- A new DNSSEC-aware libdns API for use by non-BIND9 applications
- On some platforms, named and other binaries can now print out
  a stack backtrace on assertion failure, to aid in debugging.
- A "tools only" installation mode on Windows, which only installs
  dig, host, nslookup and nsupdate.
- Improved PKCS#11 support, including Keyper support and explicit
  OpenSSL engine selection.
- version 9.7.0

-------------------------------------------------------------------
Wed Jan 20 10:06:22 CET 2010 - ug@suse.de

- [security]  Do not attempt to validate or cache
              out-of-bailiwick data returned with a secure
              answer; it must be re-fetched from its original
              source and validated in that context. [RT #20819]

- [security]  Cached CNAME or DNAME RR could be returned to clients
              without DNSSEC validation. [RT #20737]

- [security]  Bogus NXDOMAIN could be cached as if valid. [RT #20712]
- version 9.6.1-P3

-------------------------------------------------------------------
Mon Jan  4 14:29:43 CET 2010 - ug@suse.de

- removed the syntax check for include files (bnc#567593)

-------------------------------------------------------------------
Tue Dec 15 20:01:44 CET 2009 - jengelh@medozas.de

- add baselibs.conf as a source
- enable parallel building
- add baselibs for SPARC
- package documentation as noarch

-------------------------------------------------------------------
Wed Nov 25 09:44:13 CET 2009 - ug@suse.de

- Security fix
  When validating, track whether pending data was from
  the additional section or not and only return it if
  validates as secure. [RT #20438]
  CVE-2009-4022
  bnc#558260
- update from P1 to P2

-------------------------------------------------------------------
Fri Nov 20 10:08:50 CET 2009 - ug@suse.de

- added localhost for ipv6 to default config (bnc#539529)

-------------------------------------------------------------------
Wed Nov 18 10:43:10 CET 2009 - ug@suse.de

- fixed apparmor profile (bnc#544181)

-------------------------------------------------------------------
Tue Nov  3 19:09:08 UTC 2009 - coolo@novell.com

- updated patches to apply with fuzz=0

-------------------------------------------------------------------
Wed Sep 30 15:44:32 CEST 2009 - ug@suse.de

- using start_daemon instead of startproc (bnc#539532)

-------------------------------------------------------------------
Mon Aug 10 15:30:23 CEST 2009 - ug@suse.de

- version update to 9.6.1-P1
  (security fix CVE-2009-0696)
  bnc#526185

-------------------------------------------------------------------
Tue Jun 30 12:49:37 CEST 2009 - ug@suse.de

- enabled MySQL DLZ (Dynamically Loadable Zones)

-------------------------------------------------------------------
Tue Jun 16 11:13:40 CEST 2009 - ug@suse.de

- around 50 bugfixes against 9.6.0p1
  See changelog for details
- version 9.6.1

-------------------------------------------------------------------
Thu Apr  9 11:27:57 CEST 2009 - ug@suse.de

- not all include files were copied into chroot (bnc#466800)

-------------------------------------------------------------------
Tue Mar  3 11:08:59 CET 2009 - ug@suse.de

- /etc/named.conf does not include /etc/named.d/forwarders.conf
  by default (bnc#480334)

-------------------------------------------------------------------
Wed Feb 18 16:02:47 CET 2009 - ug@suse.de

- mount /proc into chroot environment to support
  multi CPU systems (bnc#470828)

-------------------------------------------------------------------
Wed Jan 28 10:53:30 CET 2009 - ug@suse.de

- key names with spaces are allowed by genDDNSkey now
  (bnc#459739)
- a missing /etc/named.conf.include could lead to an
  error while "restart" (bnc#455888)
- version update to 9.6.0-P1
- Full NSEC3 support
- Automatic zone re-signing
- New update-policy methods tcp-self and 6to4-self
- The BIND 8 resolver library, libbind, has been removed from the
  BIND 9 distribution

-------------------------------------------------------------------
Wed Dec 10 12:34:56 CET 2008 - olh@suse.de

- use Obsoletes: -XXbit only for ppc64 to help solver during distupgrade
  (bnc#437293)

-------------------------------------------------------------------
Wed Nov 26 09:53:06 CET 2008 - ug@suse.de

- fix for removed /etc/named.d directory (bnc#448995)

-------------------------------------------------------------------
Tue Nov 11 16:54:01 CET 2008 - ro@suse.de

- SLE-11 uses PPC64 instead of PPC, adapt baselibs.conf

-------------------------------------------------------------------
Thu Oct 30 12:34:56 CET 2008 - olh@suse.de

- obsolete old -XXbit packages (bnc#437293)

-------------------------------------------------------------------
Wed Oct  1 14:34:21 CEST 2008 - ug@suse.de

- should start/stop fixed (bnc#430901)

-------------------------------------------------------------------
Fri Sep  5 15:33:27 CEST 2008 - mrueckert@suse.de

- delete the static libraries aswell
- added missiong requires to the baselibs.conf

-------------------------------------------------------------------
Mon Sep  1 14:49:33 CEST 2008 - sschober@suse.de

- Create and copy /etc/named.conf.include to change root jail. Fix
  by Frank Hollmann.

-------------------------------------------------------------------
Mon Aug 18 10:20:31 CEST 2008 - ug@suse.de

- "should-stop" in lwresd init script fixed

-------------------------------------------------------------------
Wed Aug 13 15:46:00 CEST 2008 - sschober@suse.de

- Copy complete /etc/named.d to change root jail (bnc#408145).

-------------------------------------------------------------------
Tue Aug 12 16:39:27 CEST 2008 - ug@suse.de

- performance improvement over the P1 releases, namely
   + significantly remedying the port allocation issues
   + allowing TCP queries and zone transfers while issuing as many
      outstanding UDP queries as possible
   + additional security of port randomization at the same level as P1

- also includes fixes for several bugs in the 9.5.0 base code
- 9.5.0-P2

-------------------------------------------------------------------
Sun Jul 27 11:51:38 CEST 2008 - aj@suse.de

- Remove .la files, they only introduce more problems and require
  libxml2.la installation.

-------------------------------------------------------------------
Wed Jul 16 12:50:46 CEST 2008 - ug@suse.de

- BIND 9.5 offers many new features, including many
  behind-the-scenes improvements. For the most part, the non-visible
  features help ISC's customers who have run into the upper-end of
  what BIND 9.4 could handle.
  See CHANGES for details
- Statistics Counters / server
- Cache cleaning enhancements
- GSS TSIG
- DHCID Resource Record (RR)
- Handling EDNS timeouts
- version 9.5.0

-------------------------------------------------------------------
Mon Jun  9 14:18:10 CEST 2008 - ug@suse.de

- VUL-0: spoofing made easier due to non-random UDP
  source port VU#800113 (bnc#396963)

-------------------------------------------------------------------
Tue May  6 13:46:43 CEST 2008 - ug@suse.de

- capset support fixed (bnc#386653)

-------------------------------------------------------------------
Thu Apr 10 12:54:45 CEST 2008 - ro@suse.de

- added baselibs.conf file to build xxbit packages
  for multilib support

-------------------------------------------------------------------
Tue Feb 26 16:51:13 CET 2008 - ug@suse.de

- root.hint file updated (#361094)

-------------------------------------------------------------------
Thu Dec  6 17:05:39 CET 2007 - ug@suse.de

- version 9.4.2 (more than 50 bugs fixed. See changelog. for details)
- root.hint file updated

-------------------------------------------------------------------
Thu Jul 26 13:46:45 CEST 2007 - mt@suse.de

- Bug #294403: updated to security release 9.4.1-P1 fixing:
  CVE-2007-2926: cryptographically weak query ids [RT #16915].
  CVE-2007-2925: allow-query-cache/allow-recursion default
                 acls not set [RT #16987], [RT #16960].

-------------------------------------------------------------------
Sat May 26 23:43:35 CEST 2007 - ro@suse.de

- added ldconfig to postinstall script for bind-libs

-------------------------------------------------------------------
Tue May 15 12:19:20 CEST 2007 - ug@suse.de

- added apparmor profile

-------------------------------------------------------------------
Wed May  2 10:30:56 CEST 2007 - ug@suse.de

- version 9.4.1
- query_addsoa() was being called with a non zone db.
  [RT #16834]

-------------------------------------------------------------------
Fri Mar 30 12:51:52 CEST 2007 - ug@suse.de

- libidnkitres.la moved to bind-libs for runidn

-------------------------------------------------------------------
Thu Mar 29 12:06:57 CEST 2007 - rguenther@suse.de

- Package .la files in -devel subpackage.
- Do not package useless .la files.
- Make -devel package depend on -libs package, not -utils package.

-------------------------------------------------------------------
Mon Mar  5 17:32:56 CET 2007 - ug@suse.de

- SuSEFirewall service file added (#246920)
  fate #300687

-------------------------------------------------------------------
Tue Feb 27 14:53:22 CET 2007 - ug@suse.de

- version 9.3.4 to 9.4.0
- too many changes to list them all here. Please see
  the CHANGELOG for details
- LDAP backend dropped

-------------------------------------------------------------------
Thu Jan 25 15:22:49 CET 2007 - ug@suse.de

- Bug #238634
- [security] Serialise validation of type ANY responses. [RT #16555]
- [security] It was possible to dereference a freed fetch
             context. [RT #16584]
- version 9.3.3 to 9.3.4

-------------------------------------------------------------------
Fri Jan 19 10:38:46 CET 2007 - ug@suse.de

- version 9.3.2 to 9.3.3
- lots of bugfixes (see changelog for details)

-------------------------------------------------------------------
Tue Jan  2 15:50:59 CET 2007 - ug@suse.de

- load of bind during boot fails if ip-up starts
  modify_resolvconf at the same time (#221948)

-------------------------------------------------------------------
Fri Nov 10 12:07:56 CET 2006 - ug@suse.de

- security fix (#218303)
  workarounds OpenSSL's recently
  discovered RSA signature verification issue (CVE-2006-4339) by using
  the exponent 65537 (0x10001) instead of the widely used 3.

-------------------------------------------------------------------
Tue Oct 17 20:39:31 CEST 2006 - poeml@suse.de

- there is no SuSEconfig.syslog script anymore, thus remove the
  YaST hint from the sysconfig template

-------------------------------------------------------------------
Mon Oct 16 09:50:14 CEST 2006 - ug@suse.de

- typo in sysconfig file fixed (#212337)

-------------------------------------------------------------------
Fri Sep  1 14:58:28 CEST 2006 - ug@suse.de

- security fix
  Bug #201424 VUL-0: bind: two denial-of-service attacks
  VU#697164
    BIND INSIST failure due to excessive recursive queries
  VU#915404
    BIND assertion failure during SIG query processing

-------------------------------------------------------------------
Tue Aug 15 14:28:09 CEST 2006 - ug@suse.de

- update messages removed

-------------------------------------------------------------------
Fri Aug  4 13:48:56 CEST 2006 - ug@suse.de

- moved the la files to bind-utils
  (#182448)

-------------------------------------------------------------------
Thu Jul  6 12:11:11 CEST 2006 - ug@suse.de

- fix for the nsupdate man page (#92730)
  thanx to Werner

-------------------------------------------------------------------
Wed May 17 13:00:02 CEST 2006 - ug@suse.de

- fix for ldapdump script (#175587)

-------------------------------------------------------------------
Mon Mar 13 16:57:01 CET 2006 - ug@suse.de

- typos fixed (#157611)

-------------------------------------------------------------------
Wed Feb  8 14:59:58 CET 2006 - ug@suse.de

- fixed #148527
  a broken symlink in the chroot jail is in the way

-------------------------------------------------------------------
Fri Jan 27 00:49:18 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Wed Jan 25 14:27:11 CET 2006 - ug@suse.de

- fixed #145169
  (follow symlinks during chroot jail creation)

-------------------------------------------------------------------
Sat Jan 14 22:13:30 CET 2006 - schwab@suse.de

- Don't remove sources.

-------------------------------------------------------------------
Mon Jan  2 11:05:18 CET 2006 - ug@suse.de

- version update from 9.3.1 to 9.3.2

-------------------------------------------------------------------
Mon Nov 21 12:16:32 CET 2005 - ug@suse.de

- fixed an insecure tmp file bug in the
  named-bootconf.sh contrib script

-------------------------------------------------------------------
Mon Sep 26 01:27:01 CEST 2005 - ro@suse.de

- added LDAP_DEPRECATED to CFLAGS

-------------------------------------------------------------------
Fri Jul 22 16:50:27 CEST 2005 - lmuelle@suse.de

- Copy the right default file if /etc/sysconfig/named is missing while
  calling the lwresd init script; [#97187].

-------------------------------------------------------------------
Fri Jun 17 15:14:52 CEST 2005 - ug@suse.de

- compilation with -fpie and -pie now
  which makes it harder to use
  exploits with fixed memory addresses.

-------------------------------------------------------------------
Wed Apr 13 14:06:42 CEST 2005 - mls@suse.de

- fix SLP registration

-------------------------------------------------------------------
Fri Mar 25 18:29:09 CET 2005 - schwab@suse.de

- Fix leak in lwres library [#74529].

-------------------------------------------------------------------
Fri Mar 11 18:28:37 CET 2005 - ug@suse.de

- version update from 9.3.0 to 9.3.1
- fixed bug #72153
  lwresd doesn't notice if name server is
  unreachable and times out

-------------------------------------------------------------------
Fri Mar 11 16:41:26 CET 2005 - ug@suse.de

- rndc dropped from the lwresd init script
  it conflicts with a running bind

-------------------------------------------------------------------
Mon Mar  7 14:34:28 CET 2005 - ug@suse.de

- lwresd init script "status" changed.
  rndc is not used anymore

-------------------------------------------------------------------
Wed Feb 16 11:16:40 CET 2005 - ug@suse.de

- lwresd name string changed (just beautify)

-------------------------------------------------------------------
Fri Feb  4 11:23:14 CET 2005 - ug@suse.de

- changed the "insserv" behaviour on updates
- fixed empty lwresd.conf file in chroot env.

-------------------------------------------------------------------
Thu Feb  3 17:48:21 CET 2005 - ug@suse.de

- empty lwresd.conf file fix (Bug #49081)
- lwresd is on by default now during boot

-------------------------------------------------------------------
Fri Jan 21 14:46:24 CET 2005 - ug@suse.de

- sdb-ldap activated (ldapdb.c version from 16.01.2005)
- fixed security problem bug #49927 - remote denial-of-service
  An incorrect assumption in the validator (authvalidated)
  can result in a REQUIRE (internal consistancy) test failing
  and named exiting.

-------------------------------------------------------------------
Tue Nov 30 11:39:04 CET 2004 - ug@suse.de

- fixed #48659
  "rclwresd status" answered with OKAY even if only bind was running
  "rcnamed status" answered with OKAY even if only lwresd was running

-------------------------------------------------------------------
Fri Nov 19 14:41:32 CET 2004 - ug@suse.de

- SLP support via /etc/slp.reg.d/bind.reg file added

-------------------------------------------------------------------
Thu Nov  4 14:52:17 CET 2004 - ug@suse.de

- version update to 9.3.0
- ldapdump script bug fixed (#44452)
- dnssec-makekeyset and dnssec-signkey activated
  in Makefile of bin/dnssec/

-------------------------------------------------------------------
Wed Oct 13 14:30:07 CEST 2004 - lmuelle@suse.de

- Add condrestart to the named init script and use same code as in skeleton to
  restart.
- Enhance check if named or lwresd are still running if the init script is
  called with stop.

-------------------------------------------------------------------
Mon Sep 27 17:03:38 CEST 2004 - lmuelle@suse.de

- Update to version 9.2.4.
- Use defines for named user and group settings.
- Add PreReq groupadd and useradd to the chrootenv and lwresd package,
  [#46050].
- Ensure to remove temp sysconfig file in %post.
- Remove warning from createNamedConfInclude script if a file is already
  included in /etc/named.conf as we take care of such include statements in
  the named init script anyway.
- Remove NAMED_CONF_INCLUDE_FILES fillup from include statements of
  /etc/named.conf in the %post of the bind package by the same reason.

-------------------------------------------------------------------
Sat Sep 18 18:29:40 CEST 2004 - lmuelle@suse.de

- Add all filenames from include statements of named.conf to
  NAMED_CONF_INCLUDE_FILES in the named init script, [#40610].

-------------------------------------------------------------------
Thu Sep 16 12:16:14 CEST 2004 - lmuelle@suse.de

- Add $remote_fs to Required-Start and Required-Stop of lwresd init script.
- Add Provides: dns_daemon to the lwresd package.
- Remove $time from Should-Start and Should-Stop, [#45433].

-------------------------------------------------------------------
Wed Sep 15 14:14:53 CEST 2004 - lmuelle@suse.de

- Remove conflicts from bind and bind-lwrewsd package, [#45335].
- Use rndc in lwresd init script if rndc is available.

-------------------------------------------------------------------
Thu Sep  9 17:02:25 CEST 2004 - lmuelle@suse.de

- Create /etc/rndc.key if bind-lwresd is installed and we install bind-utils
  or if bind-utils is installed and we install bind-lwresd.
- Use 0644 instead of 0640 for the named.conf file.
- Split bind-doc from bind-utils.
- Use one sysconfig file for lwresd and named.
- Split common named and lwresd sysconfig settings from them unique to named.
- Rename lwres to bind-lwresd and lwres-devel to bind-libs.
- Ensure to create user and group 'named' in the %pre of bind-lwresd and
  bind-chrootenv.

-------------------------------------------------------------------
Tue Sep  7 02:17:05 CEST 2004 - lmuelle@suse.de

- Remove %run_ldconfig from %post of the bind package.
- Move vendor files to an own tar ball.
- Create new sub packages lwres, lwres-devel, and bind-chrootenv, [#44711].
- Use new update message mechanism, [#44344].

-------------------------------------------------------------------
Sun Jun 20 10:21:37 CEST 2004 - lmuelle@suse.de

- Quote definition of NOM_PATH_FILE in configure.in.

-------------------------------------------------------------------
Mon May 31 15:47:51 CEST 2004 - lmuelle@suse.de

- Add BIND.desktop file for SuSEhelp.

-------------------------------------------------------------------
Wed May 19 14:30:07 CEST 2004 - lmuelle@suse.de

- Add -d, directroy option to genDDNSkey [#40786].
- Update ldapdump to version 1.1.  This Version has better keyfile checks and
  throws an error message if a keyfile can't be found, instead of just barfing
  perl errors.

-------------------------------------------------------------------
Wed May 12 12:43:37 CEST 2004 - lmuelle@suse.de

- Update ldapdump; don't use .zone suffix for zone files.

-------------------------------------------------------------------
Wed Apr 28 15:18:40 CEST 2004 - lmuelle@suse.de

- Add /etc/openldap/schema/dnszone.schema to the bind-utils package.
- Add /usr/share/bind/ldapdump to the bind package.
- Add idnkit programs and libraries.
- Add idn patches for dig, host, and nslookup.
- Ensure to call functions initializeNamed, checkAndCopyConfigFiles, and
  namedCheckConf in the named init script only one time.
  Let namedCheckConf check the configuration inside the chroot.
- Check all configuration files in named init script while called with probe.
- Add NAMED_INITIALIZE_SCRIPTS to sysconfig.named.  This allows to call
  arbitrary scripts before named is started, restarted, or reloaded.
  Therewith it's also possible to disable createNamedConfInclude entirely.
- createNamedConfInclude always overwrite .SuSEconfig file [#33768].
- Rename SuSEconfig.named to createNamedConfInclude and move it to
  /usr/share/bind.

-------------------------------------------------------------------
Sat Mar 13 21:06:48 CET 2004 - schwab@suse.de

- Fix path to docs in sample named.conf.

-------------------------------------------------------------------
Tue Feb 24 18:47:38 CET 2004 - poeml@suse.de

- add genDDNSkey to bind-utils (formerly in dhcp-server package)
- allow --keyfile and --keyname to be used with genDDNSkey, and
  allow using /dev/urandom to avoid blocking
- in the init script, use rndc (if possible) in order to shut down,
  so named will flush pending changes to dynamical zones
- when restarting named, make sure it is stopped before trying to
  start it again [#34937]
- update root zone (dated Jan 29, 2004)

-------------------------------------------------------------------
Thu Feb 12 09:32:30 CET 2004 - kukuk@suse.de

- Fix group of named.conf.include in filelist
- Build with -fno-strict-aliasing

-------------------------------------------------------------------
Wed Oct 15 15:32:00 CEST 2003 - lmuelle@suse.de

- update to version 9.2.3; includes the new zone type "delegation-only" to
  foil Verisign's sitefinder games
- move root.hint to an extra source file, named.root
- use /etc/named.d and /var/lib/named/master directory in the example
  configuration from the sample-config directory
- supress superfluous warning in SuSEconfig.named if /etc/named.conf.include
  is empty
- create /etc/rndc.key in the init script if it's missing
- call namedCheckConf after checkAndCopyConfigFiles to allow us to start named
  after checkAndCopyConfigFiles fixed a problem
- call SuSEconfig -module named not direct in the init script
- add norootforbuild to the spec file
- set owner of /etc/named.d and /etc/named.d/rndc-access.conf to root:
- add additional x while testing strings in the init script
- always include /etc/rndc.key in rndc-access.conf
- remove absolet stdtime.diff
- remove ip6rev.diff, as one part is included upstream and the other isn't
  possible any longer

-------------------------------------------------------------------
Wed Oct  8 17:19:25 CEST 2003 - schwab@suse.de

- Fix typo in last change.

-------------------------------------------------------------------
Mon Sep 29 15:37:35 CEST 2003 - kukuk@suse.de

- Create named.conf.include if it does not exist [Bug #31683]
- Don't add rndc-access.conf at update [Bug #31696]

-------------------------------------------------------------------
Fri Sep 19 13:01:53 CEST 2003 - kukuk@suse.de

- Fix all useradd calls

-------------------------------------------------------------------
Mon Sep 15 08:35:06 CEST 2003 - kukuk@suse.de

- Fix Requires and Provides [Bug #30717]

-------------------------------------------------------------------
Fri Aug 29 12:29:03 CEST 2003 - kukuk@suse.de

- Call useradd with -r for system accounts [Bug #29611]

-------------------------------------------------------------------
Thu Aug 28 20:06:46 CEST 2003 - lmuelle@suse.de

- call sbin/SuSEconfig --module named and not directly the script in the %post
  section
- check if rndc is accessible in the init script

-------------------------------------------------------------------
Tue Aug 26 17:35:10 CEST 2003 - lmuelle@suse.de

- add Config: syslog-ng to sysconfig.syslog-named

-------------------------------------------------------------------
Sat Aug 23 01:29:39 CEST 2003 - lmuelle@suse.de

- add NAMED_ARGS to sysconfig.named
- use -r /dev/urandom while calling rndc-confgen in the post section

-------------------------------------------------------------------
Thu Aug 21 16:46:12 CEST 2003 - lmuelle@suse.de

- rename package from bind9 to bind
- add stop_on_removal and restart_on_update macros to preun and postun section
  fix bug #29048
- add default /etc/named.d/rndc-access.conf
- add SuSEconfig.named
- add all included files to NAMED_CONF_INCLUDE_FILES of /etc/sysconfig/named
  while update if NAMED_CONF_INCLUDE_FILES is empty
- add additional sysconfig meta data
- remove -u from the copy in prepare_chroot() of the init script due to
  the rist of a wrong system time
- unify init scripts; add one space at the end to all echos
- document new features in the README.{SuSE,UnitedLinux}
- fix bug #28585

-------------------------------------------------------------------
Mon May 26 15:52:42 CEST 2003 - lmuelle@suse.de

- add -u to copy in prepare_chroot() of the init script, #25687
- fix output format in init script

-------------------------------------------------------------------
Fri Apr 11 15:01:00 CEST 2003 - mludvig@suse.cz

- Make nibble queries instead of bitstring ones for IPv6 addresses.
- Differentiate between 6bone (3ffe::/16, .ip6.int) and other
  addresses (!3ffe::/16, ip6.arpa).

-------------------------------------------------------------------
Wed Mar 12 13:58:35 CET 2003 - lmuelle@suse.de

- fix try-restart part of init skript
- set PATH to "/sbin:/usr/sbin:/bin:/usr/bin", #21295

-------------------------------------------------------------------
Mon Mar 10 18:40:40 CET 2003 - lmuelle@suse.de

- remove %ghost from /var/lib/named/var/log

-------------------------------------------------------------------
Mon Mar 10 18:03:36 CET 2003 - lmuelle@suse.de

- add null logging for lame-servers to logging example in named.conf
- fix file section
- change /var/run/named to a sym link pointing to /var/lib/named/var/run/named,
  #24768

-------------------------------------------------------------------
Wed Mar  5 17:09:20 CET 2003 - lmuelle@suse.de

- remove empty.zone due to possibility of CIDR addressing
- remove rndc.conf; rndc also uses rndc.key, fix bug #17751
- create rndc.key with 512bit sized key in %post
- remove %pre of utils package
- create additional sub directories log, dyn and master in /var/lib/named
- add a non active logging example to named.conf

-------------------------------------------------------------------
Tue Mar  4 17:50:58 CET 2003 - lmuelle@suse.de

- update to version 9.2.2; maintenance/ bugfix release

-------------------------------------------------------------------
Sat Mar  1 17:41:47 CET 2003 - ro@suse.de

- also create named user/group in utils preinstall

-------------------------------------------------------------------
Thu Feb 27 23:53:01 CET 2003 - ro@suse.de

- create named user/group in preinstall and install

-------------------------------------------------------------------
Thu Feb 27 14:00:59 CET 2003 - lmuelle@suse.de

- set /etc/named.conf to root:named and 0640
- add an example to additional info mail for dynamic updates
- add more information to the README
- add sysconfig file for chroot jail; default is yes
- add chroot features to init script for start and reload

-------------------------------------------------------------------
Mon Feb 24 16:56:17 CET 2003 - lmuelle@suse.de

- add separate binaries to PreReq
- add --localstatedir=/var to configure call
- add and autocreate /etc/rndc.{conf,key}
- move rndc binaries and man pages to utils package
- fix %post in case of update
- set ownership of /var/lib/named to root:
- add a README
- fix init script to return correspondig message to checkproc return code
- remove umlauts from %post mail
- add additional info mail about ownership of /var/lib/named if journal files
  are used

-------------------------------------------------------------------
Mon Feb 17 22:48:21 CET 2003 - lmuelle@suse.de

- update bind9 to version 9.2.1
- move /var/named to /var/lib/named
- remove obsolete patches (bison, ltconfig_ppc64, manpages, security)

-------------------------------------------------------------------
Wed Nov 13 01:43:18 CET 2002 - ro@suse.de

- fix build with current bison (end all rules with ";")

-------------------------------------------------------------------
Sat Sep  7 16:31:04 CEST 2002 - kukuk@suse.de

- Fix running bind9 as user named [Bug #18417]

-------------------------------------------------------------------
Mon Aug 19 15:22:43 CEST 2002 - ro@suse.de

- added prereqs (#17807)

-------------------------------------------------------------------
Mon Aug 19 12:50:37 CEST 2002 - okir@suse.de

- Added patch to make named run as non-root user
- added "-u named" option to init script invocation of named

-------------------------------------------------------------------
Sun Jul 28 13:38:54 CEST 2002 - kukuk@suse.de

- Remove yacc from neededforbuild

-------------------------------------------------------------------
Sat Jul 27 18:17:13 CEST 2002 - adrian@suse.de

- add %run_ldconfig

-------------------------------------------------------------------
Mon Jul 22 09:57:32 CEST 2002 - kukuk@suse.de

- Move .so symlinks to devel package
- Move liblwres shared library to utils package
- make lib64 clean

-------------------------------------------------------------------
Wed Jul 10 22:29:04 CEST 2002 - olh@suse.de

- hack ltconfig for ppc64 to build shared libs

-------------------------------------------------------------------
Wed Jul 10 16:36:30 MEST 2002 - draht@suse.de

- move /usr/bin/nsupdate to bindutil (#16944)

-------------------------------------------------------------------
Mon Jun  3 10:59:07 CEST 2002 - okir@suse.de

- Applied security fix for remote DoS (CERT VU#739123)

-------------------------------------------------------------------
Fri Dec 14 17:55:36 CET 2001 - ro@suse.de

- removed START_NAMED

-------------------------------------------------------------------
Wed Sep  5 20:32:15 CEST 2001 - pthomas@suse.de

- Fix incorrect .so references in lwres manpages.

-------------------------------------------------------------------
Sun Aug 12 15:04:44 CEST 2001 - kukuk@suse.de

- Fix path to perl interpreter

-------------------------------------------------------------------
Wed Jul  4 09:06:38 CEST 2001 - bodammer@suse.de

- Update to bind-9.1.3 (release)
- Config-files moved away from bind-9.1.3.dif

-------------------------------------------------------------------
Mon Jul  2 11:49:12 CEST 2001 - bodammer@suse.de

- update to bind-9.1.3rc3
- "Implicit declaration of function time" in context.c fixed

-------------------------------------------------------------------
Mon Jun 25 10:48:06 CEST 2001 - bodammer@suse.de

- update to bind-9.1.3rc2

-------------------------------------------------------------------
Tue May 29 11:09:59 CEST 2001 - bodammer@suse.de

- update to bind-9.1.3rc1

-------------------------------------------------------------------
Thu May 10 14:41:05 CEST 2001 - bodammer@suse.de

- initscript fix: don't start bind in runlevel 2 [bug #7956]

-------------------------------------------------------------------
Tue May  8 15:53:04 CEST 2001 - mfabian@suse.de

- bzip2 sources

-------------------------------------------------------------------
Tue May  8 10:03:00 CEST 2001 - bodammer@suse.de

- install a new named.conf with comments

-------------------------------------------------------------------
Mon May  7 13:38:25 CEST 2001 - bodammer@suse.de

- update to bind-9.1.2 (release)

-------------------------------------------------------------------
Tue Apr 24 12:18:01 CEST 2001 - bodammer@suse.de

- little modification to named.conf

-------------------------------------------------------------------
Thu Mar 29 13:21:29 CEST 2001 - bodammer@suse.de

- update to bind-9.1.1 (release)

-------------------------------------------------------------------
Tue Mar 27 10:50:55 CEST 2001 - bodammer@suse.de

- update to bind-9.1.1rc7

-------------------------------------------------------------------
Fri Mar 23 10:39:53 CET 2001 - bodammer@suse.de

- update to bind-9.1.1rc6

-------------------------------------------------------------------
Thu Mar 15 14:47:49 CET 2001 - bodammer@suse.de

- update to bind-9.1.1rc5
- new initscript more LSB conform

-------------------------------------------------------------------
Mon Mar 12 13:34:23 CET 2001 - bodammer@suse.de

- update to bind-9.1.1rc4

-------------------------------------------------------------------
Tue Feb 27 17:05:04 CET 2001 - bodammer@suse.de

- initscript fix: now checks for a running named

-------------------------------------------------------------------
Tue Feb 27 09:18:09 CET 2001 - bodammer@suse.de

- update to bind-9.1.1rc3

-------------------------------------------------------------------
Thu Feb 15 15:04:08 CET 2001 - sf@suse.de

- added suse_update_config

-------------------------------------------------------------------
Wed Feb 14 13:27:11 CET 2001 - bodammer@suse.de

- update to bind-9.1.1rc2

-------------------------------------------------------------------
Mon Feb 12 18:04:03 CET 2001 - bodammer@suse.de

- subpackages bind9-util and bind9-devel created

-------------------------------------------------------------------
Thu Feb  8 12:08:50 CET 2001 - bodammer@suse.de

- update to bind-9.1.1rc1
- missing headerfile included in stdtime.c

-------------------------------------------------------------------
Thu Jan 18 09:40:33 CET 2001 - bodammer@suse.de

- update to bind-9.1.0

-------------------------------------------------------------------
Tue Nov 28 19:01:37 CET 2000 - bodammer@suse.de

- Fix location of rcscript

-------------------------------------------------------------------
Thu Nov 23 23:46:02 CET 2000 - ro@suse.de

- added insserv calls

-------------------------------------------------------------------
Thu Nov 23 22:40:37 CET 2000 - bodammer@suse.de

- rcscript update

-------------------------------------------------------------------
Mon Nov 13 18:19:00 CET 2000 - bodammer@suse.de

- update to bind-9.0.1

-------------------------------------------------------------------
Fri Oct  6 18:09:53 CEST 2000 - kukuk@suse.de

- change group tag

-------------------------------------------------------------------
Mon Sep 18 11:07:47 CEST 2000 - bodammer@suse.de

- update to bind-9.0.0  ( first release version )

-------------------------------------------------------------------
Wed Aug 30 13:19:52 CEST 2000 - bodammer@suse.de

- update to bind-9.0.0rc5

-------------------------------------------------------------------
Wed Aug 16 09:30:11 CEST 2000 - bodammer@suse.de

- update to bind-9.0.0rc3

-------------------------------------------------------------------
Thu Aug 10 19:50:49 CEST 2000 - bodammer@suse.de

- update to bind-9.0.0rc2
- nslookup renamed to nslookup9

-------------------------------------------------------------------
Thu Jul 13 09:53:58 CEST 2000 - bodammer@suse.de

- update to bind-9.0.0rc1 (release candidate)

-------------------------------------------------------------------
Mon Jul  3 23:10:21 CEST 2000 - bodammer@suse.de

- update to bind-9.0.0b5
- host renamed to host9

-------------------------------------------------------------------
Fri Jun 16 10:55:41 CEST 2000 - bodammer@suse.de

- update to bind-9.0.0b4

-------------------------------------------------------------------
Thu May 25 18:19:21 CEST 2000 - bodammer@suse.de

- dig renamed to dig9 to avoid conflicts with dig from bindutil
- libtool-fix added
- option -f added to suse_update_config-macro

-------------------------------------------------------------------
Wed May 24 10:10:43 CEST 2000 - bodammer@suse.de

- update to bind-9.0.0b3
- configure option added to build shared libraries

-------------------------------------------------------------------
Mon May 15 15:49:35 CEST 2000 - schwab@suse.de

- Update config files.
- Fix 64-bit bug.

-------------------------------------------------------------------
Fri May 12 16:24:15 CEST 2000 - bodammer@suse.de

- update to bind9-snap-20000510

-------------------------------------------------------------------
Tue May  2 09:44:15 CEST 2000 - bodammer@suse.de

- update to bind9-snap-20000427a

-------------------------------------------------------------------
Wed Apr 19 10:27:15 CEST 2000 - bodammer@suse.de

- update to bind9-snap-20000414

-------------------------------------------------------------------
Tue Mar 28 19:03:17 CEST 2000 - bodammer@suse.de

- update to bind-9.0.0b2

-------------------------------------------------------------------
Mon Feb  7 21:26:09 CET 2000 - bodammer@suse.de

- first public beta version bind-9.0.0b1

Places

File bind.changes of Package bind (Revision 76ca92449759e2dea67a87669786f8fa)

Places