Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
home:likan:vps
tinc
_service:obs_scm:ppa-tinc.obscpio
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File _service:obs_scm:ppa-tinc.obscpio of Package tinc
07070100000000000041ED000001D9000001DA0000000460079A2C00000000000000000000000000000000000000000000001000000000ppa-tinc/debian07070100000001000081A4000001D9000001DA0000000160079A2C00000762000000000000000000000000000000000000001500000000ppa-tinc/debian/NEWStinc (1.1~pre11-1) experimental; urgency=medium This package now provides a native systemd service file, allowing multiple instances of tinc to be managed. Existing networks listed in /etc/tinc/nets.boot will be converted to service instances once during this upgrade. Afterwards, you can enable and disable networks using: systemctl enable tinc@<netname> systemctl disable tinc@<netname> If you do not have systemd installed, the SysV init script will continue to work as usual. For more information, see README.Debian. Please note that tinc 1.1pre11 is backwards compatible with tinc 1.0.x, but is not backwards compatible with 1.1pre1 to 1.1pre10 nodes if ExperimentalProtocol is enabled, which is the default. If you have more than one node running an 1.1 prerelease version in your VPN, make sure you upgrade them all at the same time, or disable the new protocol by adding the following line to tinc.conf: ExperimentalProtocol = no If you do want to use the new protocol, be aware that this version of tinc switched to Ed25519 keys. You can generate a new Ed25519 keypair by running the following command: tinc -n <netname> generate-ed25519-keys You have to manually restart tinc after this upgrade. -- Guus Sliepen <guus@debian.org> Sat, 08 Jan 2015 14:02:27 +0100 tinc (1.1~pre2-1) experimental; urgency=low tinc-1.1 has separate control utility, tinc (without the d), which is now used to start/stop tinc instances, to reload configuration, to get various information about running tincd (including dump of nodes and connections) and so on. tincd still reacts to some signals as before, but this usage is deprecated. In particular, -k option is now gone. Also, node/connection/etc dumps are produced on tincctl stdout, not into syslog. -- Michael Tokarev <mjt@tls.msk.ru> Sun, 07 Aug 2011 13:16:17 +0400 07070100000002000081A4000001D9000001DA0000000160079A2C00000A2D000000000000000000000000000000000000001E00000000ppa-tinc/debian/README.Debiantinc for Debian --------------- The manual for tinc is also available as info pages, type `info tinc' to read it. There are several ways in which tinc may be automatically started at boot: Systemd ------- Since 1.1~pre11-1, the tinc package comes with native systemd service files. To enable and start a net, call: systemctl enable tinc@<netname> systemctl start tinc@<netname> This will cause a tincd to be started which uses the configuration from /etc/tinc/<netname>, and also makes sure that it will be started next time your system boots. Apart from controlling individual instances, you can also start/stop/reload all enabled instances simultaneously by omitting @<netname>, for example: systemctl reload tinc Note that when you have systemd installed on your system, the file /etc/tinc/nets.boot will not be used anymore to automatically start tinc daemons. If the variable EXTRA is defined in /etc/default/tinc, it will be passed on to tinc. The variable LIMITS is however not used. The service files that come with this package start tinc unconditionally. However, tinc does support socket activation. If you wish to write a socket unit for tinc, use the ListenStream option to specify on which port(s) and address(es) tinc should listen. SysVinit -------- The system startup script for tinc, /etc/init.d/tinc, uses the file /etc/tinc/nets.boot to find out which networks have to be started. Use one netname per line. Lines starting with a # are ignored. /etc/network/interfaces ----------------------- You can create a stanza in /etc/network/interfaces, and add a line with "tinc-net <netname>". This will cause a tincd to be started which uses the configuration from /etc/tinc/<netname>. You can use an inet static (with address and netmask options) or inet dhcp stanza, in which case the ifup will configure the VPN interface and you do not need to have a tinc-up script. The following options are also recognized and map directly to the corresponding command line options for tincd: tinc-config <directory> tinc-debug <level> tinc-mlock yes tinc-logfile <filename> tinc-chroot yes tinc-user <username> An example stanza: iface vpn inet static address 192.168.2.42 netmask 255.255.0.0 tinc-net myvpn tinc-debug 1 tinc-mlock yes tinc-user nobody This will start a tinc daemon that reads its configuration from /etc/tinc/myvpn, logs at debug level 1, locks itself in RAM, runs as user nobody, and creates a network interface called "vpn". Ifup then sets the address and netmask on that interface. -- Guus Sliepen <guus@debian.org>, Thu, 8 January 2015, 13:37:46 +0100 07070100000003000081A4000001D9000001DA0000000160079A2C00005074000000000000000000000000000000000000001A00000000ppa-tinc/debian/changelogtinc (1.1~pre17-1.1) experimental; urgency=medium * Non-maintainer upload. * Fix systemd service install path. Closes: #910618 * Fix typo in --enable-miniupnpc option. -- Shengjing Zhu <zhsj@debian.org> Wed, 10 Oct 2018 10:58:42 +0800 tinc (1.1~pre17-1) experimental; urgency=medium * New upstream release. - Includes fixes for CVE-2018-16737, CVE-2018-16738. - The GUI is no longer part of upstream, so has been removed. * Link with the miniupnpc library. * Bump Standards-Version. * Bump debian/compat. -- Guus Sliepen <guus@debian.org> Mon, 08 Oct 2018 16:32:57 +0200 tinc (1.1~pre15-1) experimental; urgency=medium * New upstream release. * Bump Standards-Version. * Bump debian/compat. * Don't use while loops checking PID files anymore, the tinc CLI will wait properly for the daemon to start or stop. Closes: #772379, #832784 * Clean up scripts as suggested by Dominik George. Closes: #832781 * Test for /etc/default/tinc before trying to source it. Closes: #777262 -- Guus Sliepen <guus@debian.org> Tue, 05 Sep 2017 21:03:51 +0200 tinc (1.1~pre12-1) experimental; urgency=medium * New upstream release. * Bump Standards-Version. * Depend on python-wxgtk3.0 for the GUI. * Use dh --with python2. * Add Build-Depends for dh-python. * Update links in debian/control and debian/copyright. -- Guus Sliepen <guus@debian.org> Sun, 24 Apr 2016 14:51:14 +0200 tinc (1.1~pre11-1) experimental; urgency=medium * New upstream release. * Update NEWS.Debian to reflect that tincctl has been renamed to tinc. Closes: #729889 * Warn about incompatibility with previous 1.1preX releases, and that new Ed25519 keys should be generated. * Add native systemd service files. * Automatically convert networks listed in nets.boot to systemd service instances on upgrade. * Don't restart tinc on upgrade for now. -- Guus Sliepen <guus@debian.org> Thu, 08 Jan 2015 14:51:34 +0100 tinc (1.1~pre9-1) experimental; urgency=low * New upstream release. -- Guus Sliepen <guus@debian.org> Sun, 08 Sep 2013 18:00:28 +0200 tinc (1.1~pre8-2) experimental; urgency=low * Run make clean after the configure step to get rid of .o files that were accidentily left in the orig.tar.gz. -- Guus Sliepen <guus@debian.org> Wed, 14 Aug 2013 16:13:43 +0200 tinc (1.1~pre8-1) experimental; urgency=low * New upstream release. - Handles whitespace between command line flags and optional arguments. Closes: #710267 * Bump Standards-Version. * Source /lib/lsb/init-functions in the init.d script. * Don't use texi2html anymore, use automake's install-html target which uses makeinfo. -- Guus Sliepen <guus@debian.org> Wed, 14 Aug 2013 15:34:41 +0200 tinc (1.1~pre7-2) experimental; urgency=low [ Gian Piero Carrubba ] * Init script fails to pass extra arguments to tincd. Closes: #704701 + Remove the '--' as it is passed unaltered to tincd, preventing it to read trailing parameters. + Pass extra arguments also when restarting the daemon. * Set process limits when started by ifupdown. Closes: #704702 [ Guus Sliepen ] * Check whether the tincd process is still running in the if-post-down script. Closes: #704708 -- Guus Sliepen <guus@debian.org> Wed, 01 May 2013 10:41:31 +0200 tinc (1.1~pre7-1) experimental; urgency=high * New upstream release. - Drop packets forwarded via TCP if they are too big (CVE-2013-1428). -- Guus Sliepen <guus@debian.org> Tue, 23 Apr 2013 11:37:38 +0200 tinc (1.1~pre6-1) experimental; urgency=low * New upstream release. -- Guus Sliepen <guus@debian.org> Wed, 20 Feb 2013 16:53:33 +0100 tinc (1.1~pre4-1) experimental; urgency=low [ Gian Piero Carrubba ] * Allow resource limits to be set in /etc/default/tinc. Closes: #690685 [ Guus Sliepen ] * New upstream release. -- Guus Sliepen <guus@debian.org> Wed, 05 Dec 2012 23:05:01 +0100 tinc (1.1~pre3-1) experimental; urgency=low * New upstream release. * Bump Standards-Version. * Enable parallel builds. * Bump debian/compat to 9, so tinc gets build with hardening flags. * Move tinc-gui to its own package. -- Guus Sliepen <guus@debian.org> Sun, 14 Oct 2012 23:51:21 +0200 tinc (1.1~pre2-2) experimental; urgency=low * add forgotten build-depend on libncurses5-dev for new `tincctl top' * add libevent-dev build dependency * remove build dependency on gettext -- Michael Tokarev <mjt@tls.msk.ru> Sun, 07 Aug 2011 17:32:39 +0400 tinc (1.1~pre2-1) experimental; urgency=low * first cut of 1.1-tobe. Rewrote control scripts et al to use tincctl. * build-depend on libssl >>1.0.0 to get proper EC support * remove crypto-related symlinks from src/ in clean -- probably should go into upstream makefile instead -- Michael Tokarev <mjt@tls.msk.ru> Sun, 07 Aug 2011 12:57:15 +0400 tinc (1.0.19-2) unstable; urgency=low * Fix behaviour of tinc-pidfile. Closes: #679130 * Enable parallel building in debian/rules. -- Guus Sliepen <guus@debian.org> Tue, 26 Jun 2012 18:28:34 +0200 tinc (1.0.19-1) unstable; urgency=low * New upstream release. * Bump debian/compat so tinc gets built with hardening flags. * Allow tinc-pidfile in /etc/network/interfaces. -- Guus Sliepen <guus@debian.org> Mon, 25 Jun 2012 20:29:22 +0200 tinc (1.0.18-1) unstable; urgency=low * New upstream release. -- Guus Sliepen <guus@debian.org> Sun, 25 Mar 2012 18:52:15 +0200 tinc (1.0.17-1) unstable; urgency=low * New upstream release. * Enable support for UML and VDE. -- Guus Sliepen <guus@debian.org> Sat, 10 Mar 2012 14:50:00 +0100 tinc (1.0.16-1) unstable; urgency=low * New upstream release. * Mention alarm option in /etc/init.d/tinc's usage information. Closes: #631761 -- Guus Sliepen <guus@debian.org> Sat, 23 Jul 2011 14:37:56 +0200 tinc (1.0.15-1) unstable; urgency=low * New upstream release. * Send SIGALRM to running tinc daemons whenever an interface is brought up with the ifupdown framework. Based on a patch from Joachim Breitner. Closes: #629880 * Allow tinc daemons to be started using ifupdown. -- Guus Sliepen <guus@debian.org> Fri, 24 Jun 2011 18:21:51 +0200 tinc (1.0.14-1) unstable; urgency=low * New upstream release. * Bump Standards-Version. -- Guus Sliepen <guus@debian.org> Mon, 09 May 2011 00:25:37 +0200 tinc (1.0.13-1) unstable; urgency=low * New upstream release. -- Guus Sliepen <guus@debian.org> Tue, 13 Apr 2010 12:06:36 +0200 tinc (1.0.12-2) unstable; urgency=low * Remove debconf questions. Closes: #572116 Apparently debconf may not be used to ask a question at install time and use the answer at upgrade time. Instead of kludging around this restriction, no questions are asked anymore, and tinc will now always be restarted when upgrading. * Wait up to 5 seconds for tinc daemon to stop before restarting it. -- Guus Sliepen <guus@debian.org> Tue, 02 Mar 2010 14:01:36 +0100 tinc (1.0.12-1) unstable; urgency=low * New upstream release. * Bump Standards-Version. * Migrate from CDBS to debhelper. * Convert source package to 3.0 (quilt) format. * Remove useless tinc.modules. * Use init.d script from Michael Tokarev, allowing per-network arguments to tincd. * Remove update-rc.d calls from postinst and postrm. * Let the init.d script depend on $remote_fs. -- Guus Sliepen <guus@debian.org> Thu, 04 Feb 2010 00:56:45 +0100 tinc (1.0.11-1) unstable; urgency=low * New upstream release. * Cope with texi2html arbitrarily changing its output directory. Closes: #552927 * Do not stop tinc when configuring a new version, just restart after the upgrade. -- Guus Sliepen <guus@debian.org> Sun, 01 Nov 2009 20:37:16 +0100 tinc (1.0.10-1) unstable; urgency=low * New upstream release. * Include Russian debconf translation. Closes: #548759 -- Guus Sliepen <guus@debian.org> Sun, 18 Oct 2009 16:31:49 +0200 tinc (1.0.9-1) unstable; urgency=low * New upstream release. - Binds IPv6 sockets only to IPv6. Closes: #440150 * Update copyright file. Closes: #482566 -- Guus Sliepen <guus@debian.org> Fri, 26 Dec 2008 13:25:05 +0100 tinc (1.0.8-2) unstable; urgency=low * Include Portugese debconf translation. Closes: #434191 -- Guus Sliepen <guus@debian.org> Tue, 14 Aug 2007 13:50:27 +0200 tinc (1.0.8-1) unstable; urgency=low * New upstream release. Closes: #173987 * Include german debconf translation. Closes: #412351 * Build-Depend on texinfo. Closes: #424209 -- Guus Sliepen <guus@debian.org> Wed, 16 May 2007 17:59:16 +0200 tinc (1.0.7-1) unstable; urgency=low * New upstream release. -- Guus Sliepen <guus@debian.org> Fri, 5 Jan 2007 15:55:42 +0100 tinc (1.0.6-1) unstable; urgency=low * New upstream release. -- Guus Sliepen <guus@debian.org> Mon, 18 Dec 2006 15:41:03 +0100 tinc (1.0.5-1) unstable; urgency=low * New upstream release. Closes: #391610 * Add an LSB section to the init script. -- Guus Sliepen <guus@debian.org> Tue, 14 Nov 2006 16:32:20 +0100 tinc (1.0.4-4) unstable; urgency=low * Include swedish debconf translation. Closes: #332963 * Remove nets.boot on purge. Closes: #333303 -- Guus Sliepen <guus@debian.org> Mon, 17 Oct 2005 12:34:32 +0200 tinc (1.0.4-3) unstable; urgency=low * Depend on debconf | debconf-2.0. * Include vietnamese debconf translation. Closes: #322305 * Include japanese debconf translation. Closes: #319591 -- Guus Sliepen <guus@debian.org> Thu, 29 Sep 2005 11:15:34 +0200 tinc (1.0.4-2) unstable; urgency=low * Compensate for change in texinfo's output directory. Closes: #318562 * Include Czech translation of the debconf questions. Closes: #312982 -- Guus Sliepen <guus@debian.org> Sat, 16 Jul 2005 11:42:04 +0200 tinc (1.0.4-1) unstable; urgency=low * New upstream release. Closes: #294819 * Update french translation of debconf template. Closes: #293371, #296148 * Allow dashes in nets.boot. Closes: #296281 -- Guus Sliepen <guus@debian.org> Wed, 4 May 2005 21:56:22 +0200 tinc (1.0.3-4) unstable; urgency=low * Call debconf early in postinst so it won't get confused by output from other commands in the postinst script. Closes: #292920 * If MAKEDEV doesn't know about net/tun, fall back to tun. -- Guus Sliepen <guus@debian.org> Mon, 31 Jan 2005 13:27:16 +0100 tinc (1.0.3-3) unstable; urgency=low * Fix clean rule in debian/rules. -- Guus Sliepen <guus@debian.org> Thu, 27 Jan 2005 23:16:59 +0000 tinc (1.0.3-2) unstable; urgency=low * Don't check for /dev/tap* in postinst if we don't create them anyway. * MAKEDEV expects net/tun instead of tun. * Don't ask if /dev/net/tun should be created, just do it. Closes: #259489, #292450 * Move $EXTRA from init.d/tinc to /etc/default/tinc. Closes: #281366 -- Guus Sliepen <guus@debian.org> Thu, 27 Jan 2005 14:10:02 +0100 tinc (1.0.3-1) unstable; urgency=low * New upstream release. * Adopting the package from Ivo. * Use invoke-rc.d, and tell user to do so as well. Closes: #223276 * Let force-reload do the same thing as reload. Closes: #230180 -- Guus Sliepen <guus@debian.org> Fri, 1 Oct 2004 21:04:14 +0200 tinc (1.0.2-2) unstable; urgency=low * debian/control: Oops, really make that automake1.7. -- Ivo Timmermans <ivo@debian.org> Sat, 8 Nov 2003 21:53:04 +0100 tinc (1.0.2-1) unstable; urgency=low * New upstream release: * Fix broken replies to CHAL_RESP. (Closes: #217646) * debian/control: Updated automake build dependency to automake1.7. (Closes: #219360) -- Ivo Timmermans <ivo@debian.org> Sat, 8 Nov 2003 19:56:04 +0100 tinc (1.0.1-2) unstable; urgency=low * debian/dirs: Removed, moved contents to tinc.dirs. (Closes: #208591) * debian/docs: Renamed to tinc.docs. * debian/rules: Install the contents of doc/sample-config.tar.gz in /usr/share/doc/tinc/examples instead of /etc/tinc. * debian/Makefile*: Removed. -- Ivo Timmermans <ivo@debian.org> Wed, 10 Sep 2003 12:19:32 +0200 tinc (1.0.1-1) unstable; urgency=low * New upstream release. * debian/patches/001_openbsd_device.c.patch: Removed. -- Ivo Timmermans <ivo@debian.org> Thu, 14 Aug 2003 17:03:28 +0200 tinc (1.0release-1) unstable; urgency=low * New upstream version. (Closes: #204639) * Fixes switching back to normal logging mode when killing with SIGINT twice. (Closes: #175633) * Uses one SSL context struct for each connection, speeding up encrypting/decrypting data; don't throw away out of sequence packets. (Closes: #188874) * Fixes handling of broadcast messages. (Closes: #175632) * debian/rules: Use cdbs. * debian/control: Build-Depend on cdbs, liblzo-dev. * debian/patches/001_openbsd_device.c.patch: Sync openbsd/device.c to latest CVS version. -- Ivo Timmermans <ivo@debian.org> Sun, 10 Aug 2003 16:13:29 +0200 tinc (1.0pre8-6) unstable; urgency=low * debian/po/fr.po: Added French debconf translation. (Closes: #201803) -- Ivo Timmermans <ivo@debian.org> Fri, 18 Jul 2003 10:03:20 +0200 tinc (1.0pre8-5) unstable; urgency=low * debian/*: Change to po-debconf, thanks to From: Michel Grentzinger <mic.grentz@online.fr> for the patch: - change debhelper dependency to 4.1.16 (according to man po-debconf), - manually add nl translation in old tinc.templates (master), - run debconf-gettextize debian/tinc.templates, - move old templates files (debian/tinc.templates.*), - change construction "If you say no" to "If you refuse", * debian/rules: Call po2debconf. * debian/rules: Don't copy COPYING.README to the package. * debian/control: Update Standards-Version. * debian/conffiles: Removed. * debian/postinst: No longer use mknod directly, use MAKEDEV. -- Ivo Timmermans <ivo@debian.org> Tue, 15 Jul 2003 20:13:47 +0200 tinc (1.0pre8-4) unstable; urgency=low * src/net.h, src/net_packet.c, src/net_setup.c: Apply fix from CVS for OpenSSL-related memory leaks. (Closes: #189432) -- Ivo Timmermans <ivo@debian.org> Mon, 5 May 2003 15:00:29 +0200 tinc (1.0pre8-3) unstable; urgency=low * m4/openssl.m4: Updated to CVS version. (Closes: #184400) -- Ivo Timmermans <ivo@debian.org> Thu, 13 Mar 2003 17:24:42 +0100 tinc (1.0pre8-2) unstable; urgency=low * debian/postinst: Create /dev/net/tun if it doesn't exist. * debian/tinc.modules: Add alias for /dev/net/tun. * debian/rules: Install tinc.modules. * These things together: (Closes: #151967, #153156) -- Ivo Timmermans <ivo@debian.org> Wed, 13 Nov 2002 22:45:38 +0100 tinc (1.0pre8-1) unstable; urgency=low * New upstream version. * debian/rules: - DEB_BUILD_OPTIONS support. - Enable --enable-tracing by default. -- Ivo Timmermans <ivo@debian.org> Tue, 17 Sep 2002 13:50:44 +0200 tinc (1.0pre7-3) unstable; urgency=low * Properly install _all_ info pages. (Closes: #144718) -- Ivo Timmermans <ivo@debian.org> Wed, 29 May 2002 14:01:21 +0200 tinc (1.0pre7-2) unstable; urgency=low * Dutch translation wasn't being installed. -- Ivo Timmermans <ivo@debian.org> Thu, 11 Apr 2002 09:26:14 +0200 tinc (1.0pre7-1) unstable; urgency=medium * New upstream release. -- Ivo Timmermans <ivo@debian.org> Tue, 9 Apr 2002 16:04:46 +0200 tinc (1.0pre6-3) unstable; urgency=medium * Synched with upstream CVS. * Added build dependency on zlib1g-dev. (Closes: #141705) -- Ivo Timmermans <ivo@debian.org> Mon, 8 Apr 2002 21:19:31 +0200 tinc (1.0pre6-2) unstable; urgency=low * The Section was non-US again, so changed it back to main/net. -- Ivo Timmermans <ivo@debian.org> Thu, 28 Mar 2002 07:26:10 +0100 tinc (1.0pre6-1) unstable; urgency=low * New upstream release. * Fixed text in debian/copyright -- Ivo Timmermans <ivo@debian.org> Wed, 27 Mar 2002 23:10:07 +0100 tinc (1.0pre5-4) unstable; urgency=low * Added a debconf question for restarting on upgrade. * Added reload option to init.d, start with EXTRA='-d' default. * Moved from non-US to main. * Install example configuration files. * The HTML documentation wasn't installed; fixed. -- Ivo Timmermans <ivo@debian.org> Tue, 26 Mar 2002 20:14:19 +0100 tinc (1.0pre5-3) unstable; urgency=low * Config variables are now treated case sentitivly again. * Added a forgotten xstrdup. -- Ivo Timmermans <ivo@debian.org> Fri, 15 Feb 2002 12:35:17 +0100 tinc (1.0pre5-2) unstable; urgency=low * MaxTimeout accidentally wasn't configurable. (Closes: #119653) -- Ivo Timmermans <ivo@debian.org> Wed, 13 Feb 2002 13:36:54 +0100 tinc (1.0pre5-1) unstable; urgency=low * New upstream version. (Closes: #119653) * Init script redone in sh. -- Ivo Timmermans <ivo@debian.org> Sun, 10 Feb 2002 16:39:53 +0100 tinc (1.0pre4-1.cvs010621.6) unstable; urgency=low * Somehow po-Makefile.in.in.diff got lost, readded. (Closes: #119157) -- Ivo Timmermans <ivo@debian.org> Thu, 15 Nov 2001 17:00:03 +0100 tinc (1.0pre4-1.cvs010621.5) unstable; urgency=low * Fix a typo in postinst that let it MAKEDEV even on devfs. (Closes: #116034) -- Ivo Timmermans <ivo@debian.org> Thu, 18 Oct 2001 09:35:16 +0200 tinc (1.0pre4-1.cvs010621.4) unstable; urgency=low * Ask before creating the device files. (Closes: #111099) * Add a section to the info file. -- Ivo Timmermans <ivo@debian.org> Fri, 12 Oct 2001 20:47:09 +0200 tinc (1.0pre4-1.cvs010621.3) unstable; urgency=low * Build and install html documentation. (Closes: #106843) * Remove build-time dependency on libc6-dev. -- Ivo Timmermans <ivo@debian.org> Mon, 30 Jul 2001 22:03:52 +0200 tinc (1.0pre4-1.cvs010621.2) unstable; urgency=low * Changed location of the pidfile. (Closes: #102798) -- Ivo Timmermans <ivo@debian.org> Sun, 1 Jul 2001 01:57:43 +0200 tinc (1.0pre4-1.cvs010621.1) unstable; urgency=low * New upstream version. (Closes: #98730) * Rebuilding automatically inserted new config.{sub|guess}. (Closes: #98165) * Updated Standards-Version. * Don't include a sample configuration file. -- Ivo Timmermans <ivo@debian.org> Thu, 21 Jun 2001 14:08:49 +0200 tinc (1.0pre3-5) unstable; urgency=low * Fixed an error in the init script that prevented tinc from starting correctly. -- Ivo Timmermans <ivo@debian.org> Thu, 8 Feb 2001 02:45:09 +0100 tinc (1.0pre3-4) unstable; urgency=low * Change build-depends for OpenSSL to libssl096-dev (Closes: #84197, #84873). -- Ivo Timmermans <ivo@debian.org> Sun, 4 Feb 2001 22:43:22 +0100 tinc (1.0pre3-3) unstable; urgency=low * Set architecture to any (really this time!) (Closes: #80451). * Section set to non-US -- Ivo Timmermans <ivo@debian.org> Tue, 23 Jan 2001 22:52:53 +0100 tinc (1.0pre3-2) unstable; urgency=low * Set architecture to any (Closes: #80451). * Added tinc.modules with some useful module aliases. -- Ivo Timmermans <ivo@debian.org> Sat, 13 Jan 2001 16:10:57 +0100 tinc (1.0pre3-1) unstable; urgency=low * New upstream version (1.0pre3) (Closes: #71274). * Better Depends and Build-Depends lines. * Dropped dependencies on libgmp, added libssl. * doc-base.tinc: New file. * Deleted the file shlibs, as there on longer is a libblowfish. * Patch po/Makefile.in.in from po-Makefile.in.in.diff if necessary. * Use dh_perl to get accurate perl dependencies. -- Ivo Timmermans <ivo@debian.org> Thu, 9 Nov 2000 21:58:40 +0100 tinc (1.0pre2-1.1) unstable; urgency=low * NMU at Ivo's request as his application is being processed, and his sponsor is based in the US. -- J.H.M. Dassen (Ray) <jdassen@debian.org> Wed, 28 Jun 2000 21:52:30 +0200 tinc (1.0pre2-1) unstable; urgency=low * postinst creates a file /etc/tinc/nets.boot, containing all networks to be started upon system startup; * init.d script starts all networks from that list. * postinst script creates tap devices. -- Ivo Timmermans <itimmermans@bigfoot.com> Tue, 16 May 2000 00:06:25 +0200 tinc (1.0pre1-0.4) unstable; urgency=low * postinst script. -- Ivo Timmermans <itimmermans@bigfoot.com> Mon, 15 May 2000 19:22:05 +0200 tinc (1.0pre1-0.3) unstable; urgency=low * system startup script. -- Ivo Timmermans <itimmermans@bigfoot.com> Sun, 14 May 2000 22:58:02 +0200 tinc (1.0pre1-0.2) unstable; urgency=low * Included the blowfish license. -- Ivo Timmermans <itimmermans@bigfoot.com> Fri, 21 Apr 2000 17:07:50 +0200 tinc (1.0pre1-0.1) unstable; urgency=low * Initial Release. -- Ivo Timmermans <itimmermans@bigfoot.com> Fri, 21 Apr 2000 17:07:50 +0200 07070100000004000081A4000001D9000001DA0000000160079A2C00000003000000000000000000000000000000000000001700000000ppa-tinc/debian/compat11 07070100000005000081A4000001D9000001DA0000000160079A2C0000028B000000000000000000000000000000000000001800000000ppa-tinc/debian/controlSource: tinc Section: net Priority: optional Maintainer: Guus Sliepen <guus@debian.org> Standards-Version: 4.2.1 Build-Depends: libssl-dev (>>1.0.0), debhelper (>= 11), texinfo, zlib1g-dev, liblzo2-dev, libncurses5-dev, libreadline-dev, libvdeplug-dev, libminiupnpc-dev Homepage: https://www.tinc-vpn.org/ Package: tinc Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Description: Virtual Private Network daemon tinc is a daemon with which you can create a virtual private network (VPN). One daemon can handle multiple connections, so you can create an entire (moderately sized) VPN with only one daemon per participating computer. 07070100000006000081A4000001D9000001DA0000000160079A2C000004CA000000000000000000000000000000000000001A00000000ppa-tinc/debian/copyrightThis package was debianized by Ivo Timmermans <ivo@debian.org> on Fri, 21 Apr 2000 17:07:50 +0200. It was downloaded from https://www.tinc-vpn.org/ Upstream Authors: Guus Sliepen <guus@tinc-vpn.org> Ivo Timmermans Copyright (C) 1998-2005 Ivo Timmermans 1998-2016 Guus Sliepen <guus@tinc-vpn.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. On Debian GNU/Linux systems, the complete text of the GNU General Public License version 2 can be found in /usr/share/common-licenses/GPL-2. The following applies to tinc: This program is released under the GPL with the additional exemption that compiling, linking, and/or using OpenSSL is allowed. You may provide binary packages linked to the OpenSSL libraries, provided that all other requirements of the GPL are met. The following applies to the LZO library: Hereby I grant a special exception to the tinc VPN project (https://wwww.tinc-vpn.org/) to link the LZO library with the OpenSSL library (https://openssl.org). Markus F.X.J. Oberhumer 07070100000007000081A4000001D9000001DA0000000160079A2C00000119000000000000000000000000000000000000001E00000000ppa-tinc/debian/doc-base.tincDocument: tinc Title: tinc Manual Author: Ivo Timmermans, Guus Sliepen Abstract: This manual describes how to set up a Virtual Private Network with tinc. Section: System/Security Format: HTML Files: /usr/share/doc/tinc/tinc.html/* Index: /usr/share/doc/tinc/tinc.html/index.html 07070100000008000081A4000001D9000001DA0000000160079A2C0000000E000000000000000000000000000000000000001500000000ppa-tinc/debian/infodoc/tinc.info 07070100000009000041ED000001D9000001DA0000000260079A2C00000000000000000000000000000000000000000000001800000000ppa-tinc/debian/patches0707010000000A000081A4000001D9000001DA0000000160079A2C0000015D000000000000000000000000000000000000002B00000000ppa-tinc/debian/patches/fix-version-number--- a/configure.ac +++ b/configure.ac @@ -3,7 +3,7 @@ origcflags="$CFLAGS" AC_PREREQ(2.61) -AC_INIT([tinc], m4_esyscmd_s((git describe || echo UNKNOWN) | sed 's/release-//')) +AC_INIT([tinc], [1.1~pre17]) AC_CONFIG_SRCDIR([src/tincd.c]) AM_INIT_AUTOMAKE([std-options subdir-objects nostdinc silent-rules -Wall]) AC_CONFIG_HEADERS([config.h]) 0707010000000B000081A4000001D9000001DA0000000160079A2C00000013000000000000000000000000000000000000001F00000000ppa-tinc/debian/patches/seriesfix-version-number 0707010000000C000081A4000001D9000001DA0000000160079A2C000001B2000000000000000000000000000000000000001900000000ppa-tinc/debian/postinst#! /bin/sh NETSFILE="/etc/tinc/nets.boot" set -e case "$1" in configure) if [ ! -e $NETSFILE ] ; then mkdir -p "$(dirname "$NETSFILE")" echo "## This file contains all names of the networks to be started on system startup." > $NETSFILE fi ;; abort-upgrade|abort-remove|abort-deconfigure) ;; *) echo "postinst called with unknown argument \`$1'" >&2 exit 0 ;; esac #DEBHELPER# 0707010000000D000081A4000001D9000001DA0000000160079A2C0000005B000000000000000000000000000000000000001700000000ppa-tinc/debian/postrm#!/bin/sh set -e if [ "$1" = purge ]; then rm -f /etc/tinc/nets.boot fi #DEBHELPER# 0707010000000E000081A4000001D9000001DA0000000160079A2C00000237000000000000000000000000000000000000001800000000ppa-tinc/debian/preinst#!/bin/sh NETSFILE="/etc/tinc/nets.boot" SYSTEM="/lib/systemd/system" WANTS="/etc/systemd/system/multi-user.target.wants" set -e case "$1" in upgrade) if dpkg --compare-versions "$2" '<<' "1.1~pre11-1"; then if [ -f "$NETSFILE" ]; then echo -n "Creating systemd service instances from nets.boot:" mkdir -p "$WANTS" egrep '^[ ]*[a-zA-Z0-9_-]+' $NETSFILE | while read net args; do echo -n " $net" ln -s "$SYSTEM/tinc@.service" "$WANTS/tinc@$net.service" 2>/dev/null || true done echo "." fi fi ;; *) ;; esac #DEBHELPER# 0707010000000F000081ED000001D9000001DA0000000160079A2C00000200000000000000000000000000000000000000001600000000ppa-tinc/debian/rules#!/usr/bin/make -f %: dh $@ override_dh_auto_configure: dh_auto_configure -- --enable-uml --enable-vde --enable-miniupnpc \ --with-systemd=/lib/systemd/system/ $(MAKE) clean override_dh_auto_install: dh_auto_install -- install-html # Remove info dir file rm -f debian/tinc/usr/share/info/dir override_dh_auto_test: # Don't run the tests, it involves starting tinc daemons and making network connections. # I don't think the autobuilders will like this. override_dh_installinit: dh_installinit -r 07070100000010000041ED000001D9000001DA0000000260079A2C00000000000000000000000000000000000000000000001700000000ppa-tinc/debian/source07070100000011000081A4000001D9000001DA0000000160079A2C0000000C000000000000000000000000000000000000001E00000000ppa-tinc/debian/source/format3.0 (quilt) 07070100000012000081A4000001D9000001DA0000000160079A2C00000121000000000000000000000000000000000000001D00000000ppa-tinc/debian/tinc.default# Extra options to be passed to tincd. # EXTRA="-d" # Limits to be configured for the tincd process. Please read your shell # (pointed by /bin/sh) documentation for ulimit. You probably want to raise the # max locked memory value if using both --mlock and --user flags. # LIMITS="-l 128" 07070100000013000081A4000001D9000001DA0000000160079A2C00000014000000000000000000000000000000000000001A00000000ppa-tinc/debian/tinc.docsNEWS README AUTHORS 07070100000014000081ED000001D9000001DA0000000160079A2C000000F4000000000000000000000000000000000000002200000000ppa-tinc/debian/tinc.if-post-down#!/bin/sh set -e test "$METHOD" != loopback -a -n "$IF_TINC_NET" || exit 0 if test -z "$IF_TINC_PIDFILE"; then /usr/sbin/tinc -n "$IF_TINC_NET" stop $EXTRA else /usr/sbin/tinc -n "$IF_TINC_NET" --pidfile="$IF_TINC_PIDFILE" stop fi exit 0 07070100000015000081ED000001D9000001DA0000000160079A2C000004A0000000000000000000000000000000000000001F00000000ppa-tinc/debian/tinc.if-pre-up#!/bin/sh set -e test -n "$IF_TINC_NET" || exit 0 # Read options from /etc/default if test -e /etc/default/tinc; then . /etc/default/tinc fi # Set process limits setlimits() { while [ $# -gt 0 ]; do parm=$1 ; shift if [ -n "$1" -a "${1#-}" = "$1" ]; then value=$1 ; shift ulimit $parm $value else ulimit $parm fi done } test -n "$LIMITS" && setlimits $LIMITS # Read options from /etc/network/interfaces test -z "$IF_TINC_CONFIG" || EXTRA="$EXTRA -c $IF_TINC_CONFIG" test -z "$IF_TINC_DEBUG" || EXTRA="$EXTRA -d$IF_TINC_DEBUG" test -z "$IF_TINC_MLOCK" || EXTRA="$EXTRA --mlock" test -z "$IF_TINC_LOGFILE" || EXTRA="$EXTRA --logfile=$IF_TINC_LOGFILE" test -z "$IF_TINC_PIDFILE" || EXTRA="$EXTRA --pidfile=$IF_TINC_PIDFILE" || IF_TINC_PIDFILE=/var/run/tinc.$IF_TINC_NET.pid test -z "$IF_TINC_CHROOT" || EXTRA="$EXTRA --chroot" test -z "$IF_TINC_USER" || EXTRA="$EXTRA --user=$IF_TINC_USER" # Start tinc daemon if test -z "$IF_TINC_PIDFILE"; then /usr/sbin/tinc -n "$IF_TINC_NET" start -o "Interface=$IFACE" $EXTRA else /usr/sbin/tinc -n "$IF_TINC_NET" --pidfile="$IF_TINC_PIDFILE" start -o "Interface=$IFACE" $EXTRA fi exit 0 07070100000016000081ED000001D9000001DA0000000160079A2C000000E7000000000000000000000000000000000000001B00000000ppa-tinc/debian/tinc.if-up#!/bin/sh set -e test "$METHOD" != loopback -a -n "$IF_TINC_NET" || exit 0 if test -z "$IF_TINC_PIDFILE"; then /usr/sbin/tinc -n "$IF_TINC_NET" retry else /usr/sbin/tinc -n "$IF_TINC_NET" --pidfile="$IF_TINC_PIDFILE" retry fi 07070100000017000081A4000001D9000001DA0000000160079A2C00000897000000000000000000000000000000000000001C00000000ppa-tinc/debian/tinc.noinit#! /bin/sh # ### BEGIN INIT INFO # Provides: tinc # Required-Start: $remote_fs $network # Required-Stop: $remote_fs $network # Should-Start: $syslog $named # Should-Stop: $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start tinc daemons # Description: Create a file $NETSFILE (/etc/tinc/nets.boot), # and put all the names of the networks in there. # These names must be valid directory names under # $TCONF (/etc/tinc). Lines starting with a # will be # ignored in this file. ### END INIT INFO # # Based on Lubomir Bulej's Redhat init script. . /lib/lsb/init-functions DAEMON="/usr/sbin/tincd" CONTROL="/usr/sbin/tinc" NAME="tinc" DESC="tinc daemons" TCONF="/etc/tinc" NETSFILE="$TCONF/nets.boot" NETS="" test -f $DAEMON || exit 0 [ -r /etc/default/tinc ] && . /etc/default/tinc # foreach_net "what-to-say" action [arguments...] foreach_net() { if [ ! -f $NETSFILE ] ; then echo "Please create $NETSFILE." exit 0 fi echo -n "$1" shift egrep '^[ ]*[a-zA-Z0-9_-]+' $NETSFILE | while read net args; do echo -n " $net" case "$1" in start|restart) $CONTROL -n $net $1 $EXTRA $args ;; *) $CONTROL -n $net $1 ;; esac done echo "." } signal_running() { for i in /var/run/tinc.*pid; do if [ -f "$i" ]; then head -1 $i | while read pid junk; do kill -$1 $pid done fi done } setlimits() { while [ $# -gt 0 ]; do parm=$1 ; shift if [ -n "$1" -a "${1#-}" = "$1" ]; then value=$1 ; shift ulimit $parm $value else ulimit $parm fi done } test -n "$LIMITS" && setlimits $LIMITS case "$1" in start) foreach_net "Starting $DESC:" start ;; stop) foreach_net "Stopping $DESC:" stop ;; reload|force-reload) foreach_net "Reloading $DESC configuration:" reload ;; restart) foreach_net "Restarting $DESC:" restart ;; force-restart) $0 stop $0 start ;; retry) signal_running ALRM ;; *) echo "Usage: /etc/init.d/$NAME {start|stop|reload|restart|force-reload|retry}" exit 1 ;; esac exit 0 07070100000018000081A4000001D9000001DA0000000160079A2C00000165000000000000000000000000000000000000001200000000ppa-tinc/tinc.dscFormat: 1.0 Source: tinc Version: 1.1pre17 Binary: tinc Maintainer: Guus Sliepen <guus@debian.org> Homepage: https://www.tinc-vpn.org/ Standards-Version: 4.2.1 Build-Depends: libssl-dev (>>1.0.0), debhelper (>= 11), texinfo, zlib1g-dev, liblzo2-dev, libncurses5-dev, libreadline-dev, libvdeplug-dev, libminiupnpc-dev Debtransform-Tar: tinc-1.1pre17.tar.gz 07070100000019000081A4000001D9000001DA0000000160079A2C00001C3B000000000000000000000000000000000000001300000000ppa-tinc/tinc.specName: tinc Version: 1.1pre17 Release: 1%{?dist} Summary: A virtual private network daemon License: GPLv2+ URL: http://www.tinc-vpn.org/ Source0: http://www.tinc-vpn.org/packages/%{name}-%{version}.tar.gz BuildRequires: gcc BuildRequires: openssl-devel BuildRequires: lzo-devel BuildRequires: systemd BuildRequires: systemd-units BuildRequires: ncurses-devel BuildRequires: readline-devel Requires(post): systemd Requires(preun): systemd Requires(postun): systemd %description tinc is a Virtual Private Network (VPN) daemon that uses tunnelling and encryption to create a secure private network between hosts on the Internet. Because the tunnel appears to the IP level network code as a normal network device, there is no need to adapt any existing software. This tunnelling allows VPN sites to share information with each other over the Internet without exposing any information to others. %prep %autosetup %build %configure --with-systemd=%{_unitdir} %make_build %install %make_install rm -f %{buildroot}%{_infodir}/dir %post %systemd_post %{name}@.service %preun %systemd_preun %{name}@.service %postun %systemd_postun_with_restart %{name}@.service %files %doc AUTHORS COPYING.README NEWS README THANKS doc/sample* doc/*.tex %license COPYING %{_mandir}/man*/%{name}*.* %{_infodir}/%{name}.info.* %{_sbindir}/%{name} %{_sbindir}/%{name}d %{_unitdir}/%{name}*.service %changelog * Wed Jul 29 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.36-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild * Tue Jun 02 2020 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.36-1 - Update to new upstream version 1.0.36 * Fri Jan 31 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.35-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild * Sat Jul 27 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.35-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild * Wed Apr 24 2019 Björn Esser <besser82@fedoraproject.org> - 1.0.35-3 - Remove hardcoded gzip suffix from GNU info pages * Sun Feb 03 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.35-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild * Tue Dec 18 2018 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.35-1 - Fix for CVE-2018-16737, CVE-2018-16738 and CVE-2018-16758 - Update to new upstream version 1.0.35 * Fri Oct 26 2018 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.34-1 - Update to new upstream version 1.0.34 * Sat Jul 14 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.33-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild * Thu Mar 08 2018 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.33-3 - Fix BR * Fri Feb 09 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.33-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild * Sat Nov 04 2017 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.33-1 - Update to new upstream version 1.0.33 * Sat Sep 30 2017 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.32-1 - Update to new upstream version 1.0.32 * Thu Aug 03 2017 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.31-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild * Thu Jul 27 2017 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.31-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild * Tue Mar 14 2017 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.31-1 - Update to new upstream version 1.0.31 * Sat Feb 11 2017 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.30-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild * Mon Oct 31 2016 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.30-1 - Update to new upstream version 1.0.30 * Sat Apr 30 2016 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.28-1 - Use upstream service units - Update to new upstream version 1.0.28 * Fri Feb 05 2016 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.26-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild * Fri Jan 29 2016 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.26-1 - Update to new upstream version 1.0.26 * Fri Jun 19 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.24-7 - Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild * Wed Oct 29 2014 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.24-6 - Fix service file (rhbz#1155666) * Mon Aug 18 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.24-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild * Sun Jun 08 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.24-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild * Wed May 21 2014 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.24-3 - Update systemd * Wed May 21 2014 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.24-2 - Migration to systemd (rhbz#1078237) * Wed May 21 2014 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.24-1 - Update to new upstream version 1.0.24 * Tue Oct 29 2013 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.23-1 - Update to new upstream version 1.0.23 * Mon Aug 26 2013 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.22-1 - Update to new upstream version 1.0.22 * Sun Aug 04 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.21-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild * Wed Apr 24 2013 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.21-1 - Update to new upstream version 1.0.21 * Fri Feb 15 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.19-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild * Sat Jul 21 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.19-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild * Tue Jun 26 2012 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.19-1 - Update to new upstream version 1.0.16 * Sat Mar 31 2012 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.18-1 - Update to new upstream version 1.0.18 * Sat Jan 14 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.16-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild * Fri Sep 16 2011 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.16-1 - Update to new upstream version 1.0.16 * Wed Apr 13 2011 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.13-1 - Update to new upstream version 1.0.13 * Wed Feb 09 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.12-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild * Mon Mar 15 2010 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.12-1 - Update to new upstream version 1.0.12 * Mon Dec 07 2009 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.11-1 - Update to new upstream version 1.0.11 * Thu Oct 22 2009 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.10-1 - Removed translation stuff - Update to new upstream version 1.0.10 * Mon Dec 29 2008 Fabian Affolter <mail@fabian-affolter.ch> - 1.0.9-1 - Initial package for Fedora 07070100000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000B00000000TRAILER!!!88 blocks
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
