File jabberd.init of Package jabberd14
#! /bin/sh
# Copyright (c) 1995-2004 SUSE Linux AG, Nuernberg, Germany.
# All rights reserved.
#
# Author: Stanislav Brabec
# Please send feedback to http://www.suse.de/feedback/
#
# /etc/init.d/jabberd
# and its symbolic link
# /usr/sbin/rcjabberd
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# Template system startup script for some example service/daemon jabberd
#
# LSB compatible service control script; see http://www.linuxbase.org/spec/
#
# Note: This template uses functions rc_XXX defined in /etc/rc.status on
# UnitedLinux (UL) based Linux distributions. If you want to base your
# script on this template and ensure that it works on non UL based LSB
# compliant Linux distributions, you either have to provide the rc.status
# functions from UL or change the script to work without them.
#
### BEGIN INIT INFO
# Provides: jabberd
# Required-Start: $syslog $network
# Should-Start:
# Required-Stop: $syslog $network
# Should-Stop:
# Default-Start: 3 5
# Default-Stop: 0 1 2 6
# Short-Description: Jabber Open Source Server
# Description: Start Jabber Open Source Instant Messaging Server.
### END INIT INFO
#
# Shell functions sourced from /etc/rc.status:
# rc_check check and set local and overall rc status
# rc_status check and set local and overall rc status
# rc_status -v be verbose in local rc status and clear it afterwards
# rc_status -v -r ditto and clear both the local and overall rc status
# rc_status -s display "skipped" and exit with status 3
# rc_status -u display "unused" and exit with status 3
# rc_failed set local and overall rc status to failed
# rc_failed <num> set local and overall rc status to <num>
# rc_reset clear both the local and overall rc status
# rc_exit exit appropriate to overall rc status
# rc_active checks whether a service is activated by symlinks
. /etc/rc.status
# Reset status of this service
rc_reset
# Return values acc. to LSB for all commands but status:
# 0 - success
# 1 - generic or unspecified error
# 2 - invalid or excess argument(s)
# 3 - unimplemented feature (e.g. "reload")
# 4 - user had insufficient privileges
# 5 - program is not installed
# 6 - program is not configured
# 7 - program is not running
# 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
#
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signaling is not supported) are
# considered a success.
#
# Raymond 25DEC2003 support@bigriverinfotech.com
# /etc/rc.d/init.d/jabberd2
# init script for jabberd2 processes
# Tested under jabberd-2.0rc2 and Fedora 1.0 only
#
# processname: jabberd2
# description: jabberd2 is the next generation of the jabberd server
# chkconfig: 2345 85 15
#
progs="router resolver sm c2s s2s"
progsPath="/usr/bin"
confPath="/etc/jabberd"
pidPath="/var/lib/jabberd/pid"
retval=0
#
StatusOK ( ) {
rc_status -v
}
#
StatusFailed ( ) {
rc_failed
rc_status -v
}
#
ReqBins ( ) {
for prog in ${progs}; do
if [ ! -x ${progsPath}/${prog} ]; then
echo -n "jabberd binary [${prog}] not found."
# Note: Special treatment of stop for LSB conformance
if [ "$1" = "stop" ]; then exit 0; else exit 5; fi
fi
done
return 0
}
#
ReqConfs ( ) {
for prog in ${progs}; do
if [ ! -f ${confPath}/${prog}.xml ]; then
echo -n "jabberd configuration [${prog}.xml] not found."
if [ "$1" = "stop" ]; then exit 0; else exit 6; fi
fi
done
return 0
}
#
ReqDirs ( ) {
if [ ! -d ${pidPath} ]; then
echo -n "jabberd PID directory not found. Cannot continue."
StatusFailed
return -1
fi
return 0
}
#
Start ( ) {
for req in ReqBins ReqConfs ReqDirs; do
${req}
retval=$?
[ ${retval} == 0 ] || return ${retval}
done
echo "Initializing jabberd processes..."
for prog in ${progs}; do
if [ $( pidof -s ${prog} ) ]; then
echo -ne "\tprocess [${prog}] already running"
StatusFailed
sleep 1
continue
fi
echo -ne "\tStarting ${prog} "
if [ ${prog} == "router" ]; then
ports="5347"
elif [ ${prog} == "c2s" ]; then
ports="5222 5223"
elif [ ${prog} == "s2s" ]; then
ports="5269"
else
ports=""
fi
for port in ${ports}; do
if [ $( netstat --numeric-ports --listening --protocol=inet |
gawk '{ print $4 }' |
gawk -F : '{ print $NF }' |
grep -c ${port}$ ) -ne "0" ]; then
StatusFailed
echo -e "\tPort ${port} is currently in use. Cannot continue"
echo -e "\tIs a Jabber 1.x server running?"
Stop
let retval=1
break 2
fi
done
rm -f /var/lock/subsys/${prog}
rm -f ${pidPath}/${prog}.pid
args="-c ${confPath}/${prog}.xml"
startproc -u jabber -p ${pidPath}/${prog}.pid -q ${progsPath}/${prog} ${args}
retval=$?
if [ ${retval} == 0 ]; then
StatusOK
touch /var/lock/subsys/${prog}
else
StatusFailed
Stop
let retval=1
break
fi
sleep 1
done
return ${retval}
}
#
Stop ( ) {
echo "Terminating jabberd processes..."
for prog in ${progs}; do
echo -ne "\tStopping ${prog} "
killproc -p ${pidPath}/${prog}.pid ${prog}
retval=$?
if [ ${retval} == 0 ]; then
StatusOK
rm -f /var/lock/subsys/${prog}
rm -f ${pidPath}/${prog}.pid
else
StatusFailed
fi
sleep 1
done
return ${retval}
}
#
case "$1" in
start)
Start
;;
stop)
Stop
;;
restart)
Stop
Start
;;
try-restart|condrestart|reload)
if [ -f /var/lock/subsys/${prog} ]; then
Stop
sleep 3
Start
fi
;;
status)
rc_failed 4
rc_status -v
;;
probe)
echo reload
;;
*)
echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
let retval=1
esac
#exit ${retval}
rc_exit
#
# eof
