openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File chrony.changes of Package chrony (Revision 194bf67a3a2034282cef513a2e6a5806)

Currently displaying revision 194bf67a3a2034282cef513a2e6a5806 , Show latest

-------------------------------------------------------------------
Mon Feb 26 10:33:53 UTC 2024 - Dominique Leuenberger <dimstar@opensuse.org>

- Use %patch -P N instead of deprecated %patchN.

-------------------------------------------------------------------
Mon Jan 15 14:12:31 UTC 2024 - Reinhard Max <max@suse.com>

- Update to version 4.5:
  * Add support for AES-GCM-SIV in GnuTLS
  * Add support for corrections from PTP transparent clocks
  * Add support for systemd socket activation
  * Fix presend in interleaved mode
  * Fix reloading of modified sources from sourcedir

-------------------------------------------------------------------
Fri Sep  1 14:05:34 UTC 2023 - Fabian Vogt <fvogt@suse.com>

- Use make quickcheck instead of make check to avoid >1h build
  times and failures due to timeouts. This was the default before
  3.2 but it changed to make tests more reliable. Here a seed is
  already set to get deterministic execution.

-------------------------------------------------------------------
Wed Aug  9 17:30:28 UTC 2023 - Reinhard Max <max@suse.com>

- Update to 4.4:
  * Add support for AES-GCM-SIV with Nettle >= 3.9 to shorten NTS
    cookies to avoid some length-specific blocking of NTP on
    Internet.
  * Add support for multiple refclocks using extpps option on one
    PHC.
  * Add maxpoll option to hwtimestamp directive to improve PHC
    tracking with low packet rates
  * Add hwtstimeout directive to configure timeout for late
    timestamps.
  * Handle late hardware transmit timestamps of NTP requests on
    all sockets.
  * Handle mismatched 32/64-bit time_t in SOCK refclock samples
  * Improve source replacement
  * Log important changes made by command requests (chronyc)
  * Refresh address of NTP sources periodically
  * Set DSCP for IPv6 packets
  * Shorten NTS-KE retry interval when network is down
  * Update seccomp filter for musl
  * Warn if loading keys from file with unexpected permissions
  * Warn if source selection fails or falseticker is detected
  * Add selectopts command to modify source-specific selection
    options.
  * Add timestamp sources to serverstats report and make its fields
    64-bit.
  * Add -e option to chronyc to indicate end of response
- Update clknetsim to snapshot ef2a7a9.

-------------------------------------------------------------------
Wed Nov 16 11:37:25 UTC 2022 - Clemens Famulla-Conrad <cfamullaconrad@suse.com>

- Install chrony DHCP dispatcher script for Networkmanager
  * chrony.nm-dispatcher.dhcp.patch /var/run to /run

-------------------------------------------------------------------
Thu Sep  1 14:40:46 UTC 2022 - Reinhard Max <max@suse.com>

- Update to 4.3:
  * Add local option to refclock directive to stabilise system
    clock with more stable free-running clock (e.g. TCXO, OCXO).
  * Add maxdelayquant option to server/pool/peer directive to
    replace maxdelaydevratio filter with long-term quantile-based
    filtering.
  * Add selection option to log directive.
  * Allow external PPS in PHC refclock without configurable pin.
  * Don't accept first interleaved response to minimise error in
    delay.
  * Don't use arc4random on Linux to avoid server performance loss.
  * Improve filter option to better handle missing NTP samples.
  * Improve stability with hardware timestamping and PHC refclock.
  * Update seccomp filter
- Update clknetsim to snapshot f00531b.
- Use a more specific conditional for the /usr/etc stuff.

-------------------------------------------------------------------
Wed Jun 15 14:41:05 UTC 2022 - Stefan Schubert <schubi@suse.com>

- Moved logrotate files from user specific directory /etc/logrotate.d
  to vendor specific directory /usr/etc/logrotate.d.

-------------------------------------------------------------------
Thu May 12 14:33:50 UTC 2022 - Stefan Schubert <schubi@suse.de>

- Moved 20-chrony file from user specif directory
  /etc/NetworkManager/dispatcher.d to vendor specific directory 
  /usr/lib/NetworkManager/dispatcher.d. So, users changes can
  still be done in /etc and will not be overwritten by an update.

-------------------------------------------------------------------
Mon Jan 10 17:26:02 UTC 2022 - Reinhard Max <max@suse.com>

- boo#1194206: Use /run instead of /var/run throughout.
- bsc#1194229: Fix pool package dependencies, so that SLE actually
  prefers chrony-pool-suse over chrony-pool-empty.

-------------------------------------------------------------------
Thu Dec 16 16:47:08 UTC 2021 - Reinhard Max <max@suse.com>

- Update to 4.2
  * Add support for NTPv4 extension field improving synchronisation
    stability and resolution of root delay and dispersion
    (experimental)
  * Add support for NTP over PTP (experimental)
  * Add support for AES-CMAC and hash functions in GnuTLS
  * Improve server interleaved mode to be more reliable and support
    multiple clients behind NAT
  * Update seccomp filter
  * Fix RTC support with 64-bit time_t on 32-bit Linux
  * Fix seccomp filter to work correctly with bind*device directives
- Obsoleted patches:
  * chrony-refid-internal-md5.patch
  * harden_chrony-wait.service.patch
  * harden_chronyd.service.patch
- Update clknetsim to snapshot 470b5e9.

-------------------------------------------------------------------
Tue Dec  7 10:08:53 UTC 2021 - Reinhard Max <max@suse.com>

- Add chrony-htonl.patch to work around undocumented behaviour of
  htonl() in older glibc versions (SLE-12) on 64 bit big endian
  architectures (s390x).

-------------------------------------------------------------------
Fri Nov 19 16:39:44 UTC 2021 - Reinhard Max <max@suse.com>

- SLE bugs that have been fixed in openSUSE up to this point
  without explicit references: bsc#1183783, bsc#1184400,
  bsc#1171806, bsc#1161119, bsc#1159840.
- Obsoleted SLE patches:
  * chrony-fix-open.patch
  * chrony-gettimeofday.patch
  * chrony-ntp-era-split.patch
  * chrony-pidfile.patch
  * chrony-select-timeout.patch
  * chrony-urandom.patch
  * chrony.sysconfig
  * clknetsim-glibc-2.31.patch

-------------------------------------------------------------------
Fri Oct  8 14:52:41 UTC 2021 - Reinhard Max <max@suse.com>

- boo#1190926: PrivateDevices is too strict, we might need to
  access the rtc and ptp devices.
- Add back support to build chrony on SLE12.
- Drop dependency on asciidoctor. It is only needed for building
  the HTML documentation which we don't package anyway.

-------------------------------------------------------------------
Mon Aug 30 13:50:07 UTC 2021 - Johannes Segitz <jsegitz@suse.com>

- Added hardening to systemd service(s). Added patch(es):
  * harden_chrony-wait.service.patch
  * harden_chronyd.service.patch

-------------------------------------------------------------------
Thu Jul  1 12:38:13 UTC 2021 - Reinhard Max <max@suse.com>

- boo#1187906: Consolidate all references to the helper script.
- bsc#1173760: MD5 is not available from mozilla-nss in FIPS mode,
  but needed for calculating refids from IPv6 addresses as part of
  the NTP protocol (rfc5905). As this is a non-cryptographic use of
  MD5 we can use our own implementation without violating FIPS
  rules: chrony-refid-internal-md5.patch .

-------------------------------------------------------------------
Sun Jun 13 13:29:36 UTC 2021 - Callum Farmer <gmbr3@opensuse.org>

- Add now working CONFIG parameter to sysusers generator

-------------------------------------------------------------------
Wed Jun  2 09:10:41 UTC 2021 - Callum Farmer <gmbr3@opensuse.org>

- Change to using systemd-sysusers
- Remove otherproviders, not needed anymore

-------------------------------------------------------------------
Tue Jun  1 12:53:23 UTC 2021 - Reinhard Max <max@suse.com>

- Update to 4.1
  * Add support for NTS servers specified by IP address (matching
    Subject Alternative Name in server certificate)
  * Add source-specific configuration of trusted certificates
  * Allow multiple files and directories with trusted certificates
  * Allow multiple pairs of server keys and certificates
  * Add copy option to server/pool directive
  * Increase PPS lock limit to 40% of pulse interval
  * Perform source selection immediately after loading dump files
  * Reload dump files for addresses negotiated by NTS-KE server
  * Update seccomp filter and add less restrictive level
  * Restart ongoing name resolution on online command
  * Fix dump files to not include uncorrected offset
  * Fix initstepslew to accept time from own NTP clients
  * Reset NTP address and port when no longer negotiated by NTS-KE
    server
- Update clknetsim to snapshot f89702d.
- Refresh chrony.keyring from
  https://chrony.tuxfamily.org/gpgkey-8F375C7E8D0EE125A3D3BD51537E2B76F7680DAC.asc
- Ensure the correct pool packages are installed for openSUSE
  and SLE (bsc#1180689).

-------------------------------------------------------------------
Fri Feb  5 09:38:02 UTC 2021 - Reinhard Max <max@suse.com>

- Enable syscallfilter unconditionally [boo#1181826].

-------------------------------------------------------------------
Mon Dec  7 09:53:22 UTC 2020 - Marcus Rueckert <mrueckert@suse.de>

- drop buildrequires on NSS. We need gnutls for NTS anyway and we
  can do all the other required crypto via nettle+gnutls. no need
  for another crypto library.

-------------------------------------------------------------------
Sun Nov  1 22:26:48 UTC 2020 - Marcus Rueckert <mrueckert@suse.de>

- Update to 4.0
  - Enhancements
    - Add support for Network Time Security (NTS) authentication
    - Add support for AES-CMAC keys (AES128, AES256) with Nettle
    - Add authselectmode directive to control selection of
      unauthenticated sources
    - Add binddevice, bindacqdevice, bindcmddevice directives
    - Add confdir directive to better support fragmented
      configuration
    - Add sourcedir directive and "reload sources" command to
      support dynamic NTP sources specified in files
    - Add clockprecision directive
    - Add dscp directive to set Differentiated Services Code Point
      (DSCP)
    - Add -L option to limit log messages by severity
    - Add -p option to print whole configuration with included
      files
    - Add -U option to allow start under non-root user
    - Allow maxsamples to be set to 1 for faster update with -q/-Q
      option
    - Avoid replacing NTP sources with sources that have
      unreachable address
    - Improve pools to repeat name resolution to get "maxsources"
      sources
    - Improve source selection with trusted sources
    - Improve NTP loop test to prevent synchronisation to itself
    - Repeat iburst when NTP source is switched from offline state
      to online
    - Update clock synchronisation status and leap status more
      frequently
    - Update seccomp filter
    - Add "add pool" command
    - Add "reset sources" command to drop all measurements
    - Add authdata command to print details about NTP
      authentication
    - Add selectdata command to print details about source
      selection
    - Add -N option and sourcename command to print original names
      of sources
    - Add -a option to some commands to print also unresolved
      sources
    - Add -k, -p, -r options to clients command to select, limit,
      reset data
  - Bug fixes
    - Don’t set interface for NTP responses to allow asymmetric
      routing
    - Handle RTCs that don’t support interrupts
    - Respond to command requests with correct address on
      multihomed hosts
  - Removed features
    - Drop support for RIPEMD keys (RMD128, RMD160, RMD256, RMD320)
    - Drop support for long (non-standard) MACs in NTPv4 packets
      (chrony 2.x clients using non-MD5/SHA1 keys need to use
      option "version 3")
    - Drop support for line editing with GNU Readline
- add BuildRequires for gnutls-devel (which also pulls nettle to
  enable the new features)
- drop patches which are included in the update:
  chrony-test-update-processing-of-packet-log.patch
  chrony-test-fix-util-unit-test-for-NTP-era-split.patch
- refreshed chrony-config.patch
- track series file for easier quilt setup
- added option to turn off testsuite with
  osc build --without=testsuite

testsuite still runs by default

-------------------------------------------------------------------
Wed Oct 28 07:49:37 UTC 2020 - Thorsten Kukuk <kukuk@suse.com>

- By default we don't write log files but log to journald, so
  only recommend logrotate.

-------------------------------------------------------------------
Mon Sep 14 10:41:58 UTC 2020 - Reinhard Max <max@suse.com>

- Adjust and rename the sysconfig file, so that it matches the
  expectations of chronyd.service (bsc#1173277).

-------------------------------------------------------------------
Sun Sep 13 20:22:46 UTC 2020 - Matthias Eliasson <elimat@opensuse.org>

- Update to 3.5.1:
  * Create new file when writing pidfile (CVE-2020-14367, bsc#1174911)

-------------------------------------------------------------------
Sun Aug  2 21:27:45 UTC 2020 - Callum Farmer <callumjfarmer13@gmail.com>

- Fixes for %_libexecdir changing to /usr/libexec (bsc#1174075)

-------------------------------------------------------------------
Thu Jun  4 15:23:17 UTC 2020 - Reinhard Max <max@suse.com>

- Add chrony-pool-suse and chrony-pool-openSUSE subpackages that
  preconfigure chrony to use NTP servers from the  respective
  pools for SUSE and openSUSE (bsc#1156884, SLE-11424).
- Add chrony-pool-empty to still allow installing chrony without
  preconfigured servers.
- Use iburst in the default pool statements to speed up initial
  synchronisation (bsc#1172113).

-------------------------------------------------------------------
Thu Apr 30 16:03:16 UTC 2020 - Dominique Leuenberger <dimstar@opensuse.org>

- Use _systemdutildir instead of _libexecdir/systemd: systemd does
  not actually live below libexecdir.

-------------------------------------------------------------------
Thu Feb 13 12:45:44 UTC 2020 - Martin Liška <mliska@suse.cz>

- Add chrony-test-update-processing-of-packet-log.patch in order
  to fix test-suite failure.

-------------------------------------------------------------------
Wed Feb 12 09:24:24 UTC 2020 - Martin Liška <mliska@suse.cz>

- Update clknetsim to version 79ffe44 (fixes boo#1162964).
- Backport chrony-test-fix-util-unit-test-for-NTP-era-split.patch.

-------------------------------------------------------------------
Sat Oct 26 10:39:29 UTC 2019 - Arjen de Korte <suse+build@de-korte.org>

- Change to BuildRequires: rubygem(asciidoctor) and remove conditional
  (is available in SLE12-SP4 and SLE15* as well)
- Fix typo in %install

-------------------------------------------------------------------
Tue Oct 22 21:18:58 UTC 2019 - Arjen de Korte <suse+build@de-korte.org>

- Fix asciidoc in Tumbleweed
- Revert clknetsim to version 58c5e8b

-------------------------------------------------------------------
Tue Oct 22 15:25:18 UTC 2019 - Arjen de Korte <suse+build@de-korte.org>

- Fix incorrect download link for package signature

-------------------------------------------------------------------
Mon Oct 21 07:57:44 UTC 2019 - Martin Pluskal <mpluskal@suse.com>

- Temporarily disable signature usage as its expired
- Update clknetsim to version ac3c832

-------------------------------------------------------------------
Sat Oct 19 08:27:17 UTC 2019 - Mathias Homann <Mathias.Homann@opensuse.org>

- fix chrony-service-helper.patch

-------------------------------------------------------------------
Sat Oct 19 07:22:58 UTC 2019 - Mathias Homann <Mathias.Homann@opensuse.org>

- Update to 3.5:
  + Add support for more accurate reading of PHC on Linux 5.0
  + Add support for hardware timestamping on interfaces with read-only timestamping configuration
  + Add support for memory locking and real-time priority on FreeBSD, NetBSD, Solaris
  + Update seccomp filter to work on more architectures
  + Validate refclock driver options
  + Fix bindaddress directive on FreeBSD
  + Fix transposition of hardware RX timestamp on Linux 4.13 and later
  + Fix building on non-glibc systems

-------------------------------------------------------------------
Thu Mar 21 13:35:20 UTC 2019 - Reinhard Max <max@suse.com>

- Fix ordering and dependencies of chronyd.service, so that it is
  started after name resolution is up (bsc#1129914).
- Add chrony-service-ordering.patch
- Fix location of helper script in chrony-dnssrv@.service
  (bsc#1128846).

-------------------------------------------------------------------
Wed Mar  6 13:40:04 UTC 2019 - Martin Pluskal <mpluskal@suse.com>

- Update testsuite to version 58c5e8b

-------------------------------------------------------------------
Thu Dec 20 16:48:14 UTC 2018 - Reinhard Max <max@suse.com>

- Read runtime servers from /var/run/netconfig/chrony.servers to
  fix bsc#1099272.
- Move chrony-helper to /usr/lib/chrony/helper, because there
  should be no executables in /usr/share.

-------------------------------------------------------------------
Fri Dec 14 08:05:35 UTC 2018 - Martin Pluskal <mpluskal@suse.com>

- Make sure to generate correct sysconfig file (boo#1117147)
- Update clknetsim to revision 8b48422

-------------------------------------------------------------------
Thu Nov 22 09:27:58 UTC 2018 - Martin Pluskal <mpluskal@suse.com>

- Remove discrepancies between spec file and chrony-tmpfiles (boo#1115529)

-------------------------------------------------------------------
Thu Oct 18 10:14:08 UTC 2018 - Ismail Dönmez <idonmez@suse.com>

- Update the keyring and uncomment it in the spec file

-------------------------------------------------------------------
Thu Oct 18 07:43:44 UTC 2018 - Martin Pluskal <mpluskal@suse.com>

- Comment out bad signature

-------------------------------------------------------------------
Wed Sep 19 18:21:19 UTC 2018 - Michael Ströder <michael@stroeder.com>

- Added %{_tmpfilesdir}/%{name}.conf
- Updated clknetsim
- Update to version 3.4
  * Enhancements
    + Add filter option to server/pool/peer directive
    + Add minsamples and maxsamples options to hwtimestamp directive
    + Add support for faster frequency adjustments in Linux 4.19
    + Change default pidfile to /var/run/chrony/chronyd.pid to allow chronyd 
      without root privileges to remove it on exit
    + Disable sub-second polling intervals for distant NTP sources
    + Extend range of supported sub-second polling intervals
    + Get/set IPv4 destination/source address of NTP packets on FreeBSD
    + Make burst options and command useful with short polling intervals
    + Modify auto_offline option to activate when sending request failed
    + Respond from interface that received NTP request if possible
    + Add onoffline command to switch between online and offline state 
      according to current system network configuration
    + Improve example NetworkManager dispatcher script
  * Bug fixes
    + Avoid waiting in Linux getrandom system call
    + Fix PPS support on FreeBSD and NetBSD

-------------------------------------------------------------------
Fri Aug  3 07:56:06 UTC 2018 - mpluskal@suse.com

- Update clknetsim to revision 42b693b
  * Drop not needed chrony-fix-open.patch
- Build tests with optflags as well
- Do not run tests on i586
- Enable signd

-------------------------------------------------------------------
Thu Aug  2 07:52:58 UTC 2018 - mpluskal@suse.com

- Mention all sources as such in spec file
- Fix formatting of changelog
- Drop reference to change is not present

-------------------------------------------------------------------
Wed Aug  1 16:36:17 UTC 2018 - bwiedemann@suse.com

- Update to version 3.3
  * Enhancements:
    + Add burst option to server/pool directive
    + Add stratum and tai options to refclock directive
    + Add support for Nettle crypto library
    + Add workaround for missing kernel receive timestamps on Linux
    + Wait for late hardware transmit timestamps
    + Improve source selection with unreachable sources
    + Improve protection against replay attacks on symmetric mode
    + Allow PHC refclock to use socket in /var/run/chrony
    + Add shutdown command to stop chronyd
    + Simplify format of response to manual list command
    + Improve handling of unknown responses in chronyc
  * Bug fixes:
    + Respond to NTPv1 client requests with zero mode
    + Fix -x option to not require CAP_SYS_TIME under non-root user
    + Fix acquisitionport directive to work with privilege separation
    + Fix handling of socket errors on Linux to avoid high CPU usage
    + Fix chronyc to not get stuck in infinite loop after clock step

-------------------------------------------------------------------
Wed Apr 18 02:55:54 UTC 2018 - mpost@suse.com

- Added /etc/chrony.d/ directory to the package (bsc#1083597)
  Modifed default chrony.conf to add "include /etc/chrony.d/*"

-------------------------------------------------------------------
Mon Mar 26 17:30:07 CEST 2018 - kukuk@suse.de

- Use %license instead of %doc [bsc#1082318]

-------------------------------------------------------------------
Wed Mar 14 15:11:56 CET 2018 - kukuk@suse.de

- Fix name of fillup template (was never installed before)
- Fix Requires for fillup, it's used in post, not pre.

-------------------------------------------------------------------
Fri Feb  9 10:21:09 UTC 2018 - mpluskal@suse.com

- Enable pps support

-------------------------------------------------------------------
Thu Nov 23 13:47:05 UTC 2017 - rbrown@suse.com

- Replace references to /var/adm/fillup-templates with new 
  %_fillupdir macro (boo#1069468)

-------------------------------------------------------------------
Thu Oct 26 10:39:11 UTC 2017 - mpluskal@suse.com

- Cleanup spec file:
  * Drop pre systemd support
  * Run spec-cleaner

-------------------------------------------------------------------
Tue Oct 24 18:23:56 UTC 2017 - mpost@suse.com

- Modified the spec file to comment out the pool statement
  in chrony.conf if _not_ building for openSUSE. (bsc#1063704).

-------------------------------------------------------------------
Thu Sep 28 16:17:08 UTC 2017 - mrueckert@suse.de

- refresh patches to apply cleanly again
  - chrony-config.patch
  - chrony-fix-open.patch

-------------------------------------------------------------------
Wed Sep 20 23:57:53 UTC 2017 - mpost@suse.com

- Upgraded to version 3.2:
  Enhancements
  * Improve stability with NTP sources and reference clocks
  * Improve stability with hardware timestamping
  * Improve support for NTP interleaved modes
  * Control frequency of system clock on macOS 10.13 and later
  * Set TAI-UTC offset of system clock with leapsectz directive
  * Minimise data in client requests to improve privacy
  * Allow transmit-only hardware timestamping
  * Add support for new timestamping options introduced in Linux 4.13
  * Add root delay, root dispersion and maximum error to tracking log
  * Add mindelay and asymmetry options to server/peer/pool directive
  * Add extpps option to PHC refclock to timestamp external PPS signal
  * Add pps option to refclock directive to treat any refclock as PPS
  * Add width option to refclock directive to filter wrong pulse edges
  * Add rxfilter option to hwtimestamp directive
  * Add -x option to disable control of system clock
  * Add -l option to log to specified file instead of syslog
  * Allow multiple command-line options to be specified together
  * Allow starting without root privileges with -Q option
  * Update seccomp filter for new glibc versions
  * Dump history on exit by default with dumpdir directive
  * Use hardening compiler options by default
  Bug fixes
  * Don't drop PHC samples with low-resolution system clock
  * Ignore outliers in PHC tracking, RTC tracking, manual input
  * Increase polling interval when peer is not responding
  * Exit with error message when include directive fails
  * Don't allow slash after hostname in allow/deny directive/command
  * Try to connect to all addresses in chronyc before giving up
- Upgraded clknetsim to version 71dbbc5.
- Reworked chrony-fix-open.patch to fit the new version

-------------------------------------------------------------------
Tue Jan 31 16:38:05 UTC 2017 - mpost@suse.com

- Upgraded to version 3.1:
  - Enhancements
    - Add support for precise cross timestamping of PHC on Linux
    - Add minpoll, precision, nocrossts options to hwtimestamp directive
    - Add rawmeasurements option to log directive and modify measurements
      option to log only valid measurements from synchronised sources
    - Allow sub-second polling interval with NTP sources
  - Bug fixes
    - Fix time smoothing in interleaved mode
- Upgraded clknetsim to version ce89a1b.
- Reworked the following patches to fit the new versions
  - chrony-config.patch
  - chrony-service-helper.patch
  - chrony-fix-open.patch

-------------------------------------------------------------------
Mon Jan 16 22:36:09 UTC 2017 - mpost@suse.com

- Upgraded to version 3.0:
  - Enhancements
    - Add support for software and hardware timestamping on Linux
    - Add support for client/server and symmetric interleaved modes
    - Add support for MS-SNTP authentication in Samba
    - Add support for truncated MACs in NTPv4 packets
    - Estimate and correct for asymmetric network jitter
    - Increase default minsamples and polltarget to improve stability with very low jitter
    - Add maxjitter directive to limit source selection by jitter
    - Add offset option to server/pool/peer directive
    - Add maxlockage option to refclock directive
    - Add -t option to chronyd to exit after specified time
    - Add partial protection against replay attacks on symmetric mode
    - Don't reset polling interval when switching sources to online state
    - Allow rate limiting with very short intervals
    - Improve maximum server throughput on Linux and NetBSD
    - Remove dump files after start
    - Add tab-completion to chronyc with libedit/readline
    - Add ntpdata command to print details about NTP measurements
    - Allow all source options to be set in add server/peer command
    - Indicate truncated addresses/hostnames in chronyc output
    - Print reference IDs as hexadecimal numbers to avoid confusion with IPv4 addresses
  - Bug fixes
    - Fix crash with disabled asynchronous name resolving
- Upgraded clknetsim to version 6bb6519.

-------------------------------------------------------------------
Tue Nov 29 16:54:52 UTC 2016 - mpost@suse.com

- Upgraded to version 2.4.1:
  - Bug fixes
    - Fix processing of kernel timestamps on non-Linux systems
    - Fix crash with smoothtime directive
    - Fix validation of refclock sample times
    - Fix parsing of refclock directive

-------------------------------------------------------------------
Wed Jun  8 10:02:51 UTC 2016 - mrueckert@suse.de

- update to 2.4:
  - Enhancements
    - Add orphan option to local directive for orphan mode
      compatible with ntpd
    - Add distance option to local directive to set activation
      threshold (1 second by default)
    - Add maxdrift directive to set maximum allowed drift of system
      clock
    - Try to replace NTP sources exceeding maximum distance
    - Randomise source replacement to avoid getting stuck with bad
      sources
    - Randomise selection of sources from pools on start
    - Ignore reference timestamp as ntpd doesn't always set it
      correctly
    - Modify tracking report to use same values as seen by NTP
      clients
    - Add -c option to chronyc to write reports in CSV format
    - Provide detailed manual pages
  - Bug fixes
    - Fix SOCK refclock to work correctly when not specified as
      last refclock
    - Fix initstepslew and -q/-Q options to accept time from own
      NTP clients
    - Fix authentication with keys using 512-bit hash functions
    - Fix crash on exit when multiple signals are received
    - Fix conversion of very small floating-point numbers in
      command packets
  - Removed features
    - Drop documentation in Texinfo format
- update clknetsim to a5949fe for fixing a testsuite failure:
  - add IP_PKTINFO socket option
  - accept environment variables in make
  - fix building with FORTIFY_SOURCE
  - fix compiler warning
  - support multiple SHM refclocks
  - fix recv functions with new glibc headers
- refreshed chrony-fix-open.patch: to apply cleanly after clknetsim
  update
- drop patches:
  - chrony-include-termios.patch
  - make-105-ntpauth-more-reliable.patch
- drop buildrequires for texinfo and pre requires on the install
  info packages
- no longer use make install-docs: it only installed 0 byte html
  files.

-------------------------------------------------------------------
Wed Apr 13 14:23:38 UTC 2016 - mpluskal@suse.com

- Provide ntp-daemon (bsc#973981)

-------------------------------------------------------------------
Mon Apr 11 15:26:59 UTC 2016 - meissner@suse.com

- chrony-fix-open.patch: make sure _open and _close are initialized
  in open()/close() override, as libfreebl3 also calls from the
  the ELF constructor. FATE#319508
- enable mozilla-nss

-------------------------------------------------------------------
Fri Apr  8 15:54:08 UTC 2016 - mpluskal@suse.com

- Use correct license
- Drop hardcoded dependency on libseccomp, it is detected during 
  build

-------------------------------------------------------------------
Fri Apr  8 08:38:00 UTC 2016 - mpluskal@suse.com

- Undo reference to chrony-dnssrv@.service in %pre, %preun, %post,
  and %postun as it would lead to error.
- Change conditions for libseccom, we can use any version on SLE-12 
  x86_64

-------------------------------------------------------------------
Tue Apr  5 22:27:48 UTC 2016 - mpost@suse.com

- Removed %if for distributions that aren't building chrony.
- Renamed chrony-2.2_logrotate.patch to chrony-logrotate.patch since
  the patch is not particularly version-dependent.
- Added clknetsim for "make check" processing.
- Added Buildrequires for gcc-c++ and timezone for building clknetsim
  and running "make check".
- Changed Buildrequires and Requires to specify the minimum level of
  libseccomp needed to build on s390x and ppc64le.
- Removed "-Recommends: timedatex" since I couldn't find any instance
  of it anywhere in the build service.
- Modified the description to use some of the information from the
  chrony web site.
- Added chrony-include-termios.patch so that it will build on ppc64le.
- Added make-105-ntpauth-more-reliable.patch so that "make check"
  will not report a non-failure as a failure.
- Added --without-nss to ./configure to avoid "interruption code
  0x2003B in chronyd" errors.
- Changed the symbolic links for rcchronyd and rcchronyd-wait to 
  point to the actual location of the service command, not the symlink
  in /sbin.
- Added reference to chrony-dnssrv@.service in %pre, %preun, %post,
  and %postun.
  
-------------------------------------------------------------------
Mon Mar 28 09:35:07 UTC 2016 - mpluskal@suse.com

- Cleanup spec file with spec-cleaner
- Prepare for submission to Factory (see fate#319508)

-------------------------------------------------------------------
Thu Feb 18 16:48:46 UTC 2016 - mrueckert@suse.de

- update to 2.3
  - Enhancements
    - Add support for NTP and command response rate limiting
    - Add support for dropping root privileges on Mac OS X,
      FreeBSD, Solaris
    - Add require and trust options for source selection
    - Enable logchange by default (1 second threshold)
    - Set RTC on Mac OS X with rtcsync directive
    - Allow binding to NTP port after dropping root privileges on
      NetBSD
    - Drop CAP_NET_BIND_SERVICE capability on Linux when NTP port
      is disabled
    - Resolve names in separate process when seccomp filter is
      enabled
    - Replace old records in client log when memory limit is
      reached
    - Don't reveal local time and synchronisation state in client
      packets
    - Don't keep client sockets open for longer than necessary
    - Ignore poll in KoD RATE packets as ntpd doesn't always set it
      correctly
    - Warn when using keys shorter than 80 bits
    - Add keygen command to generate random keys easily
    - Add serverstats command to report NTP and command packet
      statistics
  - Bug fixes
    - Fix clock correction after making step on Mac OS X
    - Fix building on Solaris
- refreshed patches to apply cleanly again:
  chrony-2.2_logrotate.patch
  chrony-config.patch
  chrony-service-helper.patch

-------------------------------------------------------------------
Fri Jan 29 14:30:43 UTC 2016 - mrueckert@suse.de

- update to 2.2.1
  Restrict authentication of NTP server/peer to specified key
  (CVE-2016-1567)

-------------------------------------------------------------------
Thu Nov 26 10:45:06 UTC 2015 - mrueckert@suse.de

- silence groupadd/useradd call and drop the shell from the user.

-------------------------------------------------------------------
Thu Nov 26 01:13:52 UTC 2015 - mrueckert@suse.de

- update to 2.2
  see /usr/share/doc/packages/chrony/NEWS
- sync with fedora spec and add systemd support
- refreshed chrony-config.patch to apply cleanly again
- added chrony-2.2_logrotate.patch: add missing su option as we no
  longer have the daemon run as root.
- added chrony-service-helper.patch: imported from fedora with a
  changed path for moving from libexecdir to datadir
- only use syscall filters on 12.3 and newer
- move helper from libexecdir to datadir

-------------------------------------------------------------------
Mon Feb 24 17:21:35 UTC 2014 - mrueckert@suse.de

- clean up build section
  - the configure script can actually import CC/CFLAGS from the
    environment. no need to break any CFLAGS it might set in the
    configure script.
  - remove unneeded prefix from the make calls.
  - enable building the binaries with PIE/relro now

-------------------------------------------------------------------
Mon Feb 24 16:53:46 UTC 2014 - mrueckert@suse.de

- Update to version 1.29.1:
  * Modify chronyc protocol to prevent amplification attacks
    (CVE-2014-0021) (incompatible with previous protocol version,
    chronyc supports both)
- Additional changes from 1.29
  * Fix crash when processing crafted commands (CVE-2012-4502)
    (possible with IP addresses allowed by cmdallow and localhost)
  * Don't send uninitialized data in SUBNETS_ACCESSED and
    CLIENT_ACCESSES replies (CVE-2012-4503) (not used by chronyc)
  * Drop support for SUBNETS_ACCESSED and CLIENT_ACCESSES commands
- Additional changes from 1.28
  * Combine sources to improve accuracy
  * Make config and command parser strict
  * Add -a option to chronyc to authenticate automatically
  * Add -R option to ignore initstepslew and makestep directives
  * Add generatecommandkey, minsamples, maxsamples and user
    directives
  * Improve compatibility with NTPv1 and NTPv2 clients
  * Create sockets only in selected family with -4/-6 option
  * Treat address bind errors as non-fatal
  * Extend tracking log
  * Accept float values as initstepslew threshold
  * Allow hostnames in offline, online and burst commands
  * Fix and improve peer polling
  * Fix crash in config parsing with too many servers
  * Fix crash with duplicated initstepslew address
  * Fix delta calculation with extreme frequency offsets
  * Set local stratum correctly
  * Remove unnecessary adjtimex calls
  * Set paths in documentation by configure
  * Update chrony.spec
- Updated chrony-config.patch:
  - lots of config values were fixed upstream already
  - key file patching is unnecessary

-------------------------------------------------------------------
Sat Jul 13 22:14:49 UTC 2013 - zaitor@opensuse.org

- Update to version 1.27:
  + Added support for stronger authentication keys via NSS or
    libtomcrypt library.
  + Extended tracking, sources and activity reports printed by
    chronyc.
  + The daemon now waits in foreground until it is fully
    initialized.
  + Other bug fixes and improvements.
- Add mozilla-nss-devel & pkg-config BuildRequires, new optional
  dependencys.

-------------------------------------------------------------------
Fri Jan 11 04:29:12 UTC 2013 - mrdocs@opensuse.org

-run spec-cleaner on the spec file, fix license and remove cruft

-------------------------------------------------------------------
Tue Nov 29 13:55:16 UTC 2011 - aj@suse.de

- Update to version 1.26:
  * Added compatibility with Linux 3.0 and later
  * Fixed replying on multihomed IPv6 hosts
  * Other minor bug fixes and improvements
- Cleanup package a bit.

Places

File chrony.changes of Package chrony (Revision 194bf67a3a2034282cef513a2e6a5806)

Places