File u-boot-mx53loco.spec of Package u-boot-colibrit20

Overview Repositories Revisions Requests Users Attributes Meta

File u-boot-mx53loco.spec of Package u-boot-colibrit20

#
# spec file for package u-boot-mx53loco
#
# Copyright (c) 2016 SUSE LINUX GmbH, Nuernberg, Germany.
# Copyright (c) 2010 Texas Instruments Inc by Nishanth Menon
# Copyright (c) 2007-2010 by Silvan Calarco <silvan.calarco@mambasoft.it>
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via http://bugs.opensuse.org/
#

%define mvebu_spl 0
%define x_loader 0
%define rockchip_spl 0
%define sunxi_spl 0
%define arndale_spl 0
%define cuboxi_spl 0
%define origen_spl 0
%define udoo_spl 0

# archive_version differs from version for RC version only
%define archive_version 2016.09.01

Name:           u-boot-mx53loco
Version:        2016.09.01
Release:        0
Summary:        The U-Boot firmware for the mx53loco platform
License:        GPL-2.0
Group:          System/Boot
Url:            http://www.denx.de/wiki/U-Boot
Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2
Source2:        arndale-bl1.img
Source3:        update_git.sh
Source300:      u-boot-rpmlintrc
Patch0001:      0001-XXX-openSUSE-XXX-Load-dtb-from-part.patch
Patch0002:      0002-XXX-openSUSE-XXX-omap3-Move-to-dist.patch
Patch0003:      0003-Revert-Revert-omap3-Use-raw-SPL-by-.patch
Patch0004:      0004-efi_loader-Allow-boards-to-implemen.patch
Patch0005:      0005-ARM-bcm283x-Implement-EFI-RTS-reset.patch
Patch0006:      0006-efi_loader-gop-Expose-fb-when-32bpp.patch
Patch0007:      0007-bcm2835-video-Map-frame-buffer-as-3.patch
Patch0008:      0008-bcm2835-Reserve-the-spin-table-in-e.patch
Patch0009:      0009-x86-Move-table-csum-into-separate-h.patch
Patch0010:      0010-x86-Move-smbios-generation-into-arc.patch
Patch0011:      0011-efi_loader-Expose-efi_install_confi.patch
Patch0012:      0012-smbios-Allow-compilation-on-64bit-s.patch
Patch0013:      0013-smbios-Expose-in-efi_loader-as-tabl.patch
Patch0014:      0014-efi_loader-Fix-efi_install_configur.patch
Patch0015:      0015-smbios-Provide-serial-number.patch
Patch0016:      0016-efi_loader-Update-description-of-in.patch
Patch0017:      0017-efi_loader-Fix-memory-map-size-chec.patch
Patch0018:      0018-efi_loader-Fix-crash-on-32-bit-syst.patch
Patch0019:      0019-efi_loader-Move-efi_allocate_pool-i.patch
Patch0020:      0020-efi_loader-Track-size-of-pool-alloc.patch
Patch0021:      0021-efi_loader-Readd-freed-pages-to-mem.patch
Patch0022:      0022-efi_loader-Keep-memory-mapping-sort.patch
Patch0023:      0023-efi_loader-Do-not-leak-memory-when-.patch
BuildRoot:      %{_tmppath}/%{name}-%{version}-build
# Arndale board need DTC >= 1.4
BuildRequires:  bc
BuildRequires:  dtc >= 1.4.0
# u-boot-firefly-rk3288 needs python to build
BuildRequires:  python
%if "%{name}" == "u-boot-qemu-ppce500"
# Owns /usr/share/qemu directory
BuildRequires:  qemu
Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
%endif
%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi332b" || "%{name}" == "u-boot-rpi3"
# Owns /boot/vc directory
BuildRequires:  raspberrypi-firmware
# For mountpoint
Requires(post): util-linux
%endif
Provides:       u-boot-loader
Conflicts:      otherproviders(u-boot-loader)
%if %x_loader == 1
Obsoletes:      x-loader-mx53loco
Provides:       x-loader-mx53loco
%endif
ExclusiveArch:  armv7l armv7hl

%description
Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors.
This package contains the firmware for the mx53loco platform.

%package doc
Summary:        Documentation for the U-Boot Firmware
Group:          Documentation/Other

%description doc
Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors.
This package contains documentation for U-Boot firmware.

%prep
%setup -q -n u-boot-%{archive_version}
%patch0001 -p1
%patch0002 -p1
%patch0003 -p1
%patch0004 -p1
%patch0005 -p1
%patch0006 -p1
%patch0007 -p1
%patch0008 -p1
%patch0009 -p1
%patch0010 -p1
%patch0011 -p1
%patch0012 -p1
%patch0013 -p1
%patch0014 -p1
%patch0015 -p1
%patch0016 -p1
%patch0017 -p1
%patch0018 -p1
%patch0019 -p1
%patch0020 -p1
%patch0021 -p1
%patch0022 -p1
%patch0023 -p1

%build
export SOURCE_DATE_EPOCH=1476530748
make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" mx53loco_defconfig
make %{?jobs:-j %jobs} CROSS_COMPILE= CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
%if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
# Chromebook ARM (snow) and HP Chromebook 11 (spring) need a uImage format
export TEXT_START=$(awk '$NF == "_start" { printf "0x"$1 }' System.map)
./tools/mkimage -A arm -O linux -T kernel -C none -a $TEXT_START -e $TEXT_START -n uboot -d u-boot-dtb.bin u-boot.img
%endif
%if %rockchip_spl == 1
for t in ; do
    ./tools/mkimage -n  -d spl/u-boot-spl.bin -T $t u-boot-spl.$t
done
%endif

%install
export SOURCE_DATE_EPOCH=1476530748
export NO_BRP_STRIP_DEBUG=true
export NO_DEBUGINFO_STRIP_DEBUG=true
%define uboot_dir /boot
%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi332b" || "%{name}" == "u-boot-rpi3"
%define uboot_dir /boot/vc
%endif
%if "%{name}" == "u-boot-qemu-ppce500"
%define uboot_dir %{_datadir}/qemu
%endif
%if "%{name}" == "u-boot-jetson-tk1"
# tegra-uboot-flasher needs several intermediate files, under their original name.
for f in u-boot u-boot.dtb u-boot-dtb-tegra.bin u-boot-nodtb-tegra.bin spl/u-boot-spl; do
    install -D -m 0644 $f %{buildroot}/boot/$f
done
%else
# Some times u-boot needs a dtb to configure itself appended to the binary.
# In that case prefer the one with a working dtb already appended.
if [ -f u-boot-dtb-tegra.bin ]; then
    install -D -m 0644 u-boot-dtb-tegra.imx %{buildroot}%{uboot_dir}/u-boot.imx
elif [ -f u-boot-dtb.imx ]; then
    install -D -m 0644 u-boot-dtb.imx %{buildroot}%{uboot_dir}/u-boot.imx
else
    install -D -m 0644 u-boot.imx %{buildroot}%{uboot_dir}/u-boot.imx
fi
%if "%{name}" == "u-boot-qemu-ppce500"
mv %{buildroot}%{uboot_dir}/u-boot.imx %{buildroot}%{uboot_dir}/u-boot.e500
%endif
%endif
%if %x_loader == 1
install -D -m 0755 MLO %{buildroot}/boot/MLO
%endif
%if %origen_spl == 1
install -D -m 0755 spl/origen-spl.bin %{buildroot}/boot/origen-spl.bin
%endif
%if %arndale_spl == 1
install -D -m 0755 spl/arndale-spl.bin %{buildroot}/boot/arndale-spl.bin
install -D -m 0755 %{SOURCE2} %{buildroot}/boot/arndale-bl1.img
%endif
%if %mvebu_spl == 1
install -D -m 0755 u-boot-spl.kwb %{buildroot}%{uboot_dir}/u-boot-spl.kwb
%endif
%if %rockchip_spl == 1
install -D -m 0644 spl/u-boot-spl.bin %{buildroot}%{uboot_dir}/u-boot-spl.bin
for t in ; do
    install -D -m 0644 u-boot-spl.$t %{buildroot}%{uboot_dir}/u-boot-spl.$t
done
%endif
%if %sunxi_spl == 1
install -D -m 0755 spl/sunxi-spl.bin %{buildroot}/boot/sunxi-spl.bin
install -D -m 0755 u-boot-sunxi-with-spl.bin %{buildroot}/boot/u-boot-sunxi-with-spl.bin 
%endif
%if %cuboxi_spl == 1
install -D -m 0755 SPL %{buildroot}/boot/cuboxi-spl.bin
%endif
%if %udoo_spl == 1
install -D -m 0755 SPL %{buildroot}/boot/udoo_spl.bin
%endif

%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi332b" || "%{name}" == "u-boot-rpi3"
%post
# On the Raspberry Pi we chain-load u-boot.bin from bootcode.bin via config.txt.
# It needs to be on the first FAT partition, wherever we mounted it.
# a) Unmounted, then do nothing.
# b) Mounted as /boot/vc, then they're in the right place already.
# c) Mounted as /boot/efi, with /boot/vc as symlink, then nothing to be done.
# d) Mounted as /boot/efi, with /boot/vc a directory, then copy files over.
if mountpoint -q /boot/efi; then
  [[ "$(readlink -f /boot/efi)" -ef "$(readlink -f %{uboot_dir})" ]] || cp %{uboot_dir}/u-boot.imx /boot/efi/
fi
%endif

%files
%defattr(-,root,root)
%{uboot_dir}/*
%doc Licenses/gpl-2.0.txt README

%files doc
%defattr(-,root,root)
# Generic documents
%doc doc/README.JFFS2 doc/README.JFFS2_NAND doc/README.commands
%doc doc/README.autoboot doc/README.commands doc/README.console doc/README.dns
%doc doc/README.hwconfig doc/README.nand doc/README.NetConsole doc/README.serial_multi
%doc doc/README.SNTP doc/README.standalone doc/README.update doc/README.usb
%doc doc/README.video doc/README.VLAN doc/README.silent doc/README.POST
# Copy some useful kermit scripts as well
%doc tools/kermit/dot.kermrc tools/kermit/flash_param tools/kermit/send_cmd tools/kermit/send_image
# Now any h/w dependent Documentation
%doc doc/README.ARM-memory-map

%changelog

Places

File u-boot-mx53loco.spec of Package u-boot-colibrit20

Places