File PKGBUILD of Package linux-uksm-ck

# Contributor: graysky <graysky AT archlinux DOT us>
# Contributor: Tobias Powalowski <tpowa@archlinux.org>
# Contributor: Thomas Baechler <thomas@archlinux.org>

### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them

# Tweak kernel options prior to a build via nconfig
_makenconfig=

# Running with a 1000 HZ tick rate (vs the ARCH 300) is reported to solve the
# issues with the bfs/linux 3.1x and suspend. For more see:
# http://ck-hack.blogspot.com/2013/09/bfs-0441-311-ck1.html?showComment=1378756529345#c5266548105449573343
_1k_HZ_ticks=y

### Do not disable NUMA until CK figures out why doing so causes panics for
### some users!
# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
#_NUMAdisable=

# Compile ONLY probed modules
# As of mainline 2.6.32, running with this option will only build the modules
# that you currently have probed in your system VASTLY reducing the number of
# modules built and the build time to do it.
#
# WARNING - ALL modules must be probed BEFORE you begin making the pkg!
#
# To keep track of which modules are needed for your specific system/hardware,
# give module_db script a try: https://aur.archlinux.org/packages/modprobed-db
# This PKGBUILD will call it directly to probe all the modules you have logged!
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
_localmodcfg=

# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options.  NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
_use_current=

# Alternative I/O scheduler by Paolo Valente
# Set this if you want it enabled globally i.e. for all devices in your system
# If you want it enabled on a device-by-device basis, leave this unset and see:
# https://wiki.archlinux.org/index.php/Linux-ck#How_to_Enable_the_BFQ_I.2FO_Scheduler
_BFQ_enable_=

### Do no edit below this line unless you know what you're doing

pkgbase=linux-uksm-ck
pkgname=('linux-uksm-ck' 'linux-uksm-ck-headers')
_kernelname=-uksm-ck
_srcname=linux-4.3
pkgver=4.3
pkgrel=1
arch=('i686' 'x86_64')
url="https://wiki.archlinux.org/index.php/Linux-ck"
license=('GPL2')
makedepends=('kmod' 'inetutils' 'bc')
options=('!strip')
_uksmvernel="0.1.2.4-beta"
_uksmname="v${pkgver}"
_ckpatchversion=1
_ckpatchname="patch-4.3-ck${_ckpatchversion}"
_gcc_patch="enable_additional_cpu_optimizations_for_gcc_v4.9+_kernel_v3.15+.patch"
_bfqpath="http://algo.ing.unimo.it/people/paolo/disk_sched/patches/4.3.0-v7r8"
source=("http://www.kernel.org/pub/linux/kernel/v4.x/${_srcname}.tar.xz"
#"http://www.kernel.org/pub/linux/kernel/v4.x/patch-${pkgver}.xz"
#"https://www.kernel.org/pub/linux/kernel/v4.x/patch-${pkgver}.sign"
'config.x86_64' 'config'
'linux-uksm-ck.preset'
'change-default-console-loglevel.patch'
# ck1
"http://ck.kolivas.org/patches/4.0/4.3/4.3-ck${_ckpatchversion}/${_ckpatchname}.xz"
"http://ck.kolivas.org/patches/bfs/4.0/4.3/Pending/bfs465-nohz-buildfix.patch"
# gcc
"http://repo-ck.com/source/gcc_patch/${_gcc_patch}.gz"
# bfq
"${_bfqpath}/0001-block-cgroups-kconfig-build-bits-for-BFQ-v7r8-4.3.patch"
"${_bfqpath}/0002-block-introduce-the-BFQ-v7r8-I-O-sched-for-4.3.patch"
"${_bfqpath}/0003-block-bfq-add-Early-Queue-Merge-EQM-to-BFQ-v7r8-for-4.3.0.patch"
"uksm-${_uksmvernel}-for-linux-${_uksmname}.patch")
sha256sums=('SKIP'
            'SKIP'
            'SKIP'
            'SKIP'
            'SKIP'
            'SKIP'
            'SKIP'
            'SKIP'
            'SKIP'
            'SKIP'
            'SKIP'
            'SKIP')

prepare() {
	cd "${_srcname}"

	# add upstream patch
	#patch -p1 -i "${srcdir}/patch-${pkgver}"

	# set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param)
	# remove this when a Kconfig knob is made available by upstream
	# (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227)
	[[ -f $startdir/PATCHED ]] || patch -p1 -i "${srcdir}/change-default-console-loglevel.patch"

	# patch source with ck patchset with BFS
	# fix double name in EXTRAVERSION
	[[ -f $startdir/PATCHED ]] || sed -i -re "s/^(.EXTRAVERSION).*$/\1 = /" "${srcdir}/${_ckpatchname}"
	msg "Patching source with ck1 including BFS v0.465"
	[[ -f $startdir/PATCHED ]] || patch -Np1 -i "${srcdir}/${_ckpatchname}"
	[[ -f $startdir/PATCHED ]] || patch -Np1 -i "${srcdir}/bfs465-nohz-buildfix.patch"

	# Patch source to enable more gcc CPU optimizatons via the make nconfig
	msg "Patching source with gcc patch to enable more cpus types"
	[[ -f $startdir/PATCHED ]] || patch -Np1 -i "${srcdir}/${_gcc_patch}"
	
	msg "Patching source with BFQ patches"
	for p in $(ls ${srcdir}/000{1,2,3}-block*.patch); do
		[[ -f $startdir/PATCHED ]] || patch -Np1 -i "$p"
	done
        
        #uksm
        msg "Patching source with UKSM patch"
        [[ -f $startdir/PATCHED ]] || patch -p1 -i "${srcdir}/uksm-${_uksmvernel}-for-linux-${_uksmname}.patch"
        
	# Clean tree and copy ARCH config over
	msg "Running make mrproper to clean source tree"
	make mrproper

	if [ "${CARCH}" = "x86_64" ]; then
		[[ -f $startdir/PATCHED ]] || cat "${srcdir}/config.x86_64" > ./.config
	else
		[[ -f $startdir/PATCHED ]] || cat "${srcdir}/config" > ./.config
	fi

	### Optionally set tickrate to 1000 to avoid suspend issues as reported here:
	# http://ck-hack.blogspot.com/2013/09/bfs-0441-311-ck1.html?showComment=1379234249615#c4156123736313039413
	if [ -n "$_1k_HZ_ticks" ]; then
		msg "Setting tick rate to 1k..."
		[[ -f $startdir/PATCHED ]] || sed -i -e 's/^CONFIG_HZ_300=y/# CONFIG_HZ_300 is not set/' \
			-i -e 's/^# CONFIG_HZ_1000 is not set/CONFIG_HZ_1000=y/' \
			-i -e 's/^CONFIG_HZ=300/CONFIG_HZ=1000/' .config
	fi
	
	### Do not disable NUMA until CK figures out why doing so causes panics for
	### some users!

	# Optionally disable NUMA since >99% of users have mono-socket systems.
	# For more, see: https://bugs.archlinux.org/task/31187
#	if [ -n "$_NUMAdisable" ]; then
#		if [ "${CARCH}" = "x86_64" ]; then
#			msg "Disabling NUMA from kernel config..."
#			sed -i -e 's/CONFIG_NUMA=y/# CONFIG_NUMA is not set/' \
#				-i -e '/CONFIG_AMD_NUMA=y/d' \
#				-i -e '/CONFIG_X86_64_ACPI_NUMA=y/d' \
#				-i -e '/CONFIG_NODES_SPAN_OTHER_NODES=y/d' \
#				-i -e '/# CONFIG_NUMA_EMU is not set/d' \
#				-i -e '/CONFIG_NODES_SHIFT=6/d' \
#				-i -e '/CONFIG_NEED_MULTIPLE_NODES=y/d' \
#				-i -e '/# CONFIG_MOVABLE_NODE is not set/d' \
#				-i -e '/CONFIG_USE_PERCPU_NUMA_NODE_ID=y/d' \
#				-i -e '/CONFIG_ACPI_NUMA=y/d' ./.config
#		fi
#	fi

	### Optionally use running kernel's config
	# code originally by nous; http://aur.archlinux.org/packages.php?ID=40191
	if [ -n "$_use_current" ]; then
		if [[ -s /proc/config.gz ]]; then
			msg "Extracting config from /proc/config.gz..."
			# modprobe configs
			[[ -f $startdir/PATCHED ]] || zcat /proc/config.gz > ./.config
		else
			warning "You kernel was not compiled with IKCONFIG_PROC!"
			warning "You cannot read the current config!"
			warning "Aborting!"
			exit
		fi
	fi

	if [ "${_kernelname}" != "" ]; then
		[[ -f $startdir/PATCHED ]] || sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
		[[ -f $startdir/PATCHED ]] || sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config
	fi

	### Optionally enable BFQ as the default I/O scheduler
	if [ -n "$_BFQ_enable_" ]; then
		msg "Setting BFQ as default I/O scheduler..."
		[[ -f $startdir/PATCHED ]] || sed -i -e '/CONFIG_DEFAULT_IOSCHED/ s,cfq,bfq,' \
			-i -e s'/CONFIG_DEFAULT_CFQ=y/# CONFIG_DEFAULT_CFQ is not set\nCONFIG_DEFAULT_BFQ=y/' ./.config
	fi
        #enable uksm
        [[ -f $startdir/PATCHED ]] || sed -i 's/CONFIG_KSM=y/CONFIG_KSM=y\nCONFIG_UKSM=y\n# CONFIG_KSM_LEGACY is not set/g' ./.config
        
	# set extraversion to pkgrel
	[[ -f $startdir/PATCHED ]] || sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile

	# don't run depmod on 'make install'. We'll do this ourselves in packaging
	[[ -f $startdir/PATCHED ]] || sed -i '2iexit 0' scripts/depmod.sh

	# get kernel version
	msg "Running make prepare for you to enable patched options of your choosing"
	make prepare

	### Optionally load needed modules for the make localmodconfig
	# See https://aur.archlinux.org/packages/modprobed-db
		if [ -n "$_localmodcfg" ]; then
		msg "If you have modprobed-db installed, running it in recall mode now"
		if [ -e /usr/bin/modprobed-db ]; then
			[[ ! -x /usr/bin/sudo ]] && echo "Cannot call modprobe with sudo.  Install via pacman -S sudo and configure to work with this user." && exit 1
			sudo /usr/bin/modprobed-db recall
		fi
		msg "Running Steven Rostedt's make localmodconfig now"
		make localmodconfig
	fi

	if [ -n "$_makenconfig" ]; then
		msg "Running make nconfig"
	    make nconfig
	fi

	# rewrite configuration
	yes "" | make config >/dev/null

	# save configuration for later reuse
	if [ "${CARCH}" = "x86_64" ]; then
		cat .config > "${startdir}/config.x86_64.last"
	else
		cat .config > "${startdir}/config.last"
	fi
}

build() {
		cd "${_srcname}"
		make ${MAKEFLAGS} LOCALVERSION= bzImage modules
		msg "Running make bzImage and modules"
}

package_linux-uksm-ck() {
	pkgdesc='Linux Kernel with the ck1 patchset featuring the Brain Fuck Scheduler v0.465.'
	#_Kpkgdesc='Linux Kernel and modules with the ck1 patchset featuring the Brain Fuck Scheduler v0.465.'
	#pkgdesc="${_Kpkgdesc}"
	depends=('coreutils' 'linux-firmware' 'mkinitcpio>=0.7')
        optdepends=('crda: to set the correct wireless channels of your country' 'nvidia-uksm-ck: nVidia drivers for linux-uksm-ck' 'modprobed-db: Keeps track of EVERY kernel module that has ever been probed - useful for those of us who make localmodconfig')
	backup=("etc/mkinitcpio.d/linux-uksm-ck.preset")
	install=linux-uksm-ck.install
	#groups=('ck-generic')

	cd "${_srcname}"

	KARCH=x86

	# get kernel version
	_kernver="$(make LOCALVERSION= kernelrelease)"
	_basekernel=${_kernver%%-*}
	_basekernel=${_basekernel%.*}

	mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
	make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install
	cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-linux-uksm-ck"

	# set correct depmod command for install
	cp -f "${startdir}/${install}" "${startdir}/${install}.pkg"
	true && install=${install}.pkg

	sed \
		-e  "s/KERNEL_NAME=.*/KERNEL_NAME=-uksm-ck/g" \
		-e  "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/g" \
		-i "${startdir}/${install}"

	# install mkinitcpio preset file for kernel
	install -D -m644 "${srcdir}/linux-uksm-ck.preset" "${pkgdir}/etc/mkinitcpio.d/linux-uksm-ck.preset"
	sed \
		-e "1s|'linux.*'|'linux-uksm-ck'|" \
		-e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-linux-uksm-ck\"|" \
		-e "s|default_image=.*|default_image=\"/boot/initramfs-linux-uksm-ck.img\"|" \
		-e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-linux-uksm-ck-fallback.img\"|" \
		-i "${pkgdir}/etc/mkinitcpio.d/linux-uksm-ck.preset"

	# remove build and source links
	rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
	# remove the firmware
	rm -rf "${pkgdir}/lib/firmware"
	# make room for external modules
	ln -s "../extramodules-${_basekernel}${_kernelname:ck}" "${pkgdir}/lib/modules/${_kernver}/extramodules"
	# add real version for building modules and running depmod from post_install/upgrade
	mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:ck}"
	echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:ck}/version"

	# Now we call depmod...
	depmod -b "${pkgdir}" -F System.map "${_kernver}"

	# move module tree /lib -> /usr/lib
	mkdir -p "${pkgdir}/usr"
	mv "${pkgdir}/lib" "${pkgdir}/usr/"

	# add vmlinux
	install -D -m644 vmlinux "${pkgdir}/usr/lib/modules/${_kernver}/build/vmlinux"
}


package_linux-uksm-ck-headers() {
	pkgdesc='Header files and scripts to build modules for linux-uksm-ck.'
	#_Hpkgdesc='Header files and scripts to build modules for linux-uksm-ck.'
	#pkgdesc="${_Hpkgdesc}"
	depends=('linux-uksm-ck') # added to keep kernel and headers packages matched
	#groups=('ck-generic')

	install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"

	cd "${srcdir}/${_srcname}"
	install -D -m644 Makefile \
		"${pkgdir}/usr/lib/modules/${_kernver}/build/Makefile"
	install -D -m644 kernel/Makefile \
		"${pkgdir}/usr/lib/modules/${_kernver}/build/kernel/Makefile"
	install -D -m644 .config \
		"${pkgdir}/usr/lib/modules/${_kernver}/build/.config"

	mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include"

	for i in acpi asm-generic config crypto drm generated keys linux math-emu \
		media net pcmcia scsi sound trace uapi video xen; do
	cp -a include/${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/include/"
	done

	# copy arch includes for external modules
	mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/x86"
	cp -a arch/x86/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/x86/"

	# copy files necessary for later builds, like nvidia and vmware
	cp Module.symvers "${pkgdir}/usr/lib/modules/${_kernver}/build"
	cp -a scripts "${pkgdir}/usr/lib/modules/${_kernver}/build"

	# fix permissions on scripts dir
	chmod og-w -R "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts"
	mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/.tmp_versions"

	mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel"

	cp arch/${KARCH}/Makefile "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"

	if [ "${CARCH}" = "i686" ]; then
		cp arch/${KARCH}/Makefile_32.cpu "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
	fi

	cp arch/${KARCH}/kernel/asm-offsets.s "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel/"

	# add docbook makefile
	install -D -m644 Documentation/DocBook/Makefile \
	"${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"

	# add dm headers
	mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
	cp drivers/md/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"

	# add inotify.h
	mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux"
	cp include/linux/inotify.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux/"

	# add wireless headers
	mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
	cp net/mac80211/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"

	# add dvb headers for external modules
	# in reference to:
	# http://bugs.archlinux.org/task/9912
	mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core"
	cp drivers/media/dvb-core/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core/"
	# and...
	# http://bugs.archlinux.org/task/11194
	###
	### DO NOT MERGE OUT THIS IF STATEMENT
	### IT AFFECTS USERS WHO STRIP OUT THE DVB STUFF SO THE OFFICIAL ARCH CODE HAS A CP
	### LINE THAT CAUSES MAKEPKG TO END IN AN ERROR
	###
	if [ -d include/config/dvb/ ]; then
		mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
		cp include/config/dvb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
	fi

	# add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
	# in reference to:
	# http://bugs.archlinux.org/task/13146
	mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
	cp drivers/media/dvb-frontends/lgdt330x.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
	mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
	cp drivers/media/i2c/msp3400-driver.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"

	# add dvb headers
	# in reference to:
	# http://bugs.archlinux.org/task/20402
	mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb"
	cp drivers/media/usb/dvb-usb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb/"
	mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends"
	cp drivers/media/dvb-frontends/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
	mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners"
	cp drivers/media/tuners/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners/"

	# add xfs and shmem for aufs building
	mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs"
	mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/mm"
	# removed in 3.17 series
	#cp fs/xfs/xfs_sb.h "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs/xfs_sb.h"

	# copy in Kconfig files
	for i in $(find . -name "Kconfig*"); do
		mkdir -p "${pkgdir}"/usr/lib/modules/${_kernver}/build/`echo ${i} | sed 's|/Kconfig.*||'`
		cp ${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/${i}"
	done

	chown -R root.root "${pkgdir}/usr/lib/modules/${_kernver}/build"
	find "${pkgdir}/usr/lib/modules/${_kernver}/build" -type d -exec chmod 755 {} \;

	# strip scripts directory
	find "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
	case "$(file -bi "${binary}")" in
	*application/x-sharedlib*) # Libraries (.so)
		/usr/bin/strip ${STRIP_SHARED} "${binary}";;
	*application/x-archive*) # Libraries (.a)
		/usr/bin/strip ${STRIP_STATIC} "${binary}";;
	*application/x-executable*) # Binaries
		/usr/bin/strip ${STRIP_BINARIES} "${binary}";;
	esac
	done

	 # remove unneeded architectures
	 rm -rf "${pkgdir}"/usr/lib/modules/${_kernver}/build/arch/{alpha,arc,arm,arm26,arm64,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,metag,mips,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa}
}