openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File HOWTO-TEST of Package slirp

HOW TO TEST SLIRP
-----------------

root@local:~# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth1
0.0.0.0         192.168.1.1     0.0.0.0         UG    0      0        0 eth1

root@local:~# pppd nodefaultroute noauth nobsdcomp nodetach debug :10.1.2.1 pty "ssh -t user@remote.machine.org slirp ppp"

(if ssh asks you for a password, type it, or better, set up ssh so it allows
you connecting without password, see ssh-keygen and authorized_keys in ssh
manpages)

(you can omit later "nodetach debug" when it works so it leaves you free
the terminal)

the output should be some like this:

using channel 42
Using interface ppp0
Connect: ppp0 <--> /dev/pts/4
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf74615a7> <pcomp>
<accomp>]
Executing slirp-amd64 in chroot:
/org/pergolesi.debian.org/chroot/sid_amd64_pure
Slirp v1.0.17 (BETA)

Copyright (c) 1995,1996 Danny Gasparovski and others.
All rights reserved.
This program is copyrighted, free software.
Please read the file COPYRIGHT that came with the Slirp
package for the terms and conditions of the copyright.

IP address of Slirp host: 192.168.92.92
IP address of your DNS(s): 192.168.93.98, 192.168.96.93, 192.168.93.91
Your address is 10.0.2.15
(or anything else you want)

Type five zeroes (0) to exit.

[talking PPP, 115200 baud]

SLiRP Ready ...
rcvd [LCP ConfReq id=0x1 <mru 1500> <magic 0xc78771c2> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 1500> <magic 0xc78771c2> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xf74615a7> <pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0xf74615a7]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 192.168.1.10>]
rcvd [LCP EchoRep id=0x0 magic=0xc78771c2]
rcvd [IPCP ConfReq id=0x1 <addr 192.168.92.92> <compress VJ 0f 01>]
sent [IPCP ConfNak id=0x1 <addr 10.1.2.1>]
rcvd [CCP ConfReq id=0x1]
sent [CCP ConfAck id=0x1]
rcvd [CCP ConfRej id=0x1 <deflate 15> <deflate(old#) 15>]
sent [CCP ConfReq id=0x2]
rcvd [IPCP ConfNak id=0x1 <addr 10.0.2.15>]
sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 10.0.2.15>]
rcvd [IPCP ConfReq id=0x2 <addr 10.1.2.1> <compress VJ 0f 01>]
sent [IPCP ConfAck id=0x2 <addr 10.1.2.1> <compress VJ 0f 01>]
rcvd [CCP ConfAck id=0x2]
rcvd [IPCP ConfAck id=0x2 <compress VJ 0f 01> <addr 10.0.2.15>]
Cannot determine ethernet address for proxy ARP
local  IP address 10.0.2.15
remote IP address 10.1.2.1
Script /etc/ppp/ip-up started (pid 10418)
Script /etc/ppp/ip-up finished (pid 10418), status = 0x0

in another terminal:

root@local:~# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
10.1.2.1        0.0.0.0         255.255.255.255 UH    0      0        0 ppp0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth1
0.0.0.0         192.168.1.1     0.0.0.0         UG    0      0        0 eth1

root@local:~# route add -host www.google.com dev ppp0
root@local:~# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
10.1.2.1        0.0.0.0         255.255.255.255 UH    0      0        0 ppp0
216.239.59.99   0.0.0.0         255.255.255.255 UH    0      0        0 ppp0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth1
0.0.0.0         192.168.1.1     0.0.0.0         UG    0      0        0 eth1

note that www.google.com has more than one IP and you have put only one in
your routing table:

root@local:~# host www.google.com
www.google.com is an alias for www.l.google.com.
www.l.google.com has address 216.239.59.103
www.l.google.com has address 216.239.59.104
www.l.google.com has address 216.239.59.147
www.l.google.com has address 216.239.59.99

root@tordo:~# telnet 216.239.59.99 80
Trying 216.239.59.99...
Connected to 216.239.59.99.
Escape character is '^]'.
GET / HTTP/1.0   <---- type this, and one ENTER
Host: www.google.com   <---- type this, and two ENTER

HTTP/1.0 302 Found
Location: http://www.google.de/
Cache-Control: private
Set-Cookie:
PREF=ID=91babd388241b148:TM=1187103593:LM=1187103593:S=HnEmAd_s3Kkdf2pV;
expires=Sun, 17-Jan-2038 19:14:07 GMT; path=/; domain=.google.com
Content-Type: text/html
Server: GWS/2.1
Content-Length: 218
Date: Tue, 14 Aug 2007 14:59:53 GMT
Connection: Keep-Alive

<HTML><HEAD><meta http-equiv="content-type"
content="text/html;charset=utf-8">
<TITLE>302 Moved</TITLE></HEAD><BODY>
<H1>302 Moved</H1>
The document has moved
<A HREF="http://www.google.de/">here</A>.
</BODY></HTML>
Connection closed by foreign host.
root@local:~#

To end the link:

You can just press ^C in the terminal pppd is running (when using nodetach)
or else run "poff" or "killall pppd"

Enjoy!

Places

File HOWTO-TEST of Package slirp

Places