File python-pyOCD.changes of Package python-pyOCD
-------------------------------------------------------------------
Mon Nov 11 21:01:24 UTC 2024 - Dirk Müller <dmueller@suse.com>
- update to 0.36.0:
* Allow FlashBuilder to work when program page size is larger
than sector erase size (@BrianPugh)
* Very basic implementation to get a "connect" LED status
display (@rgrr)
* Add Trace Funnel Coresight component (@rapgenic)
* Cortex-M CPU type detection improvements
* Debug sequences: support pname on DebugPort* sequences
* Add MAX32666FTHR board (@ozersa)
* Add STMicro STM32 H743 and H723 targets (@unsanded)
* nRF91 family improvements (@maxd-nordic)
* Add HDSC HC32F448 hc32a460xe and hc32a4a0xi. (@lennvn)
* Add airm2m air001 target (@kaidegit)
* Add airm2m air32f103 target (@HalfSweet)
* Add STMicro STM32H7B0 Target (@BrianPugh)
* Add NXP S32K344 target (@PetervdPerk-NXP)
* Add Realtek RTL8762C (@suphammer)
* Add some missing ST and NXP board IDs
* Fix HC32l130 32k+ flash error (@kaidegit)
* Fix HC32L13x size and enable double buffering (@kaidegit)
* Infineon PSoC6: remove unnecessary sleep during reset (@te-
johan)
* Remove part number match for NXP MIMXRTxxxx series family
* RTT: fix CB not found (@tdasika)
* CMSIS-DAP: Windows performance regression fix
* Debug sequences: fix assignment expressions.
* flash: fix some type errors, sort imports
* Removed extraneous space character in the default `cortex_m`
target warning message (@BenjaminSoelberg)
* Flash loader: fix missing import of RamRegion
* coresight: adiv5 discovery: increment invalid AP count on
exception
* cortex-m: reset_halt: just warn about invalid T-bit, don't
automatically fix
* commands: reset: fall back to reset via probe if context has
no selected core
* Only create one session to access options when there's no
current session, to reduce debug log message output.
- update to 0.35.1:
* debug sequences: support [uU] suffix on integer literals
* commands: `show accessible-pins`: fix function call, print
GPIO pins
* commands: `show locked`: fix misspelled "target"
* coresight: dap: revert API change to add DebugPort param to
DPConnector constructor (in particular, this broke the NXP
SPSDK tool's pyOCD support)
* manifest: add sequences.lark
* code quality: do not use bare exception handler
- update to 0.35.0:
* With this release, Python 3.6 is no longer supported. The
minimum Python version is now 3.7.0.
* cmsis-packs: debug sequence support; see the documentation
for details
* rtt: add RTT support to gdbserver via the addition of an
`rtt` command (thanks @samueldewan)
* rtt: add logging function to rtt sub-command (thanks
@zjli-2019)
* coresight: cortex-m: 'primary_core' option
* subcommands: Python tracebacks are no longer printed unless
debug logging is enabled (the `debug.traceback` option is
disabled by default)
* object graph nodes have names now, accessible with the
`.node_name` attribute
* board and SoC nodes have default names of "board" and "soc"
* CPUs will have a default (uniquified) name of the CPU type,
or a custom name specified in a DFP
* these names are visible in some of the commands such as `show
cores` or `show graph`, and can be used in commands such as
`core` (to select the core that commands apply to)
* memory map: memory regions can have subregions; this is used
for flash memory regions to explicitly support multiple
sector sizes and/or flash algorithms
* target: added generic `sw_system` and `sw_core` reset types
(aliased as `system` and `core`, with
`Target.ResetType.SW_SYSTEM` and `Target.ResetType.SW_CORE`
enums in the API), corresponding to the existing
`sysresetreq` and `vectreset` reset types
* target: `.supported_reset_types` property returns a list of
allowed reset type enums
* flash: add `--no-reset` option to prevent resetting of device
after programming (thanks @nordicjm)
* flash: memory regions are now created when a DFP specifies an
algorithm without also defining a corresponding memory
region, as long as that algorithm is marked as default
* core: `cache.enable_memory` and `cache.enable_register`
session options to control the memory and register cache used
by the gdb server
* commands: add `show sequences` command
* commands: add `reset-type` value to show and set current
reset type and view available reset types
* commands: new `sleep` command
* commands: add `pins` and `accessible-pins` values
* api: debug probe pins API
* dependency: bump minimum cmsis-pack-manager version to 0.5.2
* dependencies: bump pylink-square to minimum v1.0 (thanks
* probe: accept WCH-Link as DAPv1 (thanks @eugene-bright)
* probe: cmsis-dap: add "CMSIS_DAP" to known device strings
* probe: stlink: cache board IDs to improve connect time
* semihosting: ensure directories exist before opening a file
(thanks @Hoohaha)
* RTOS: Catch TransferErrors during kernel state checks (thanks
@imi415)
* flash: catch exceptions while fetching state (thanks @maxd-
nordic)
* coresight: discovery: continue after an AP probe failure
occurs
* core: soc_target: options to control memory and register
cache enablement
* trace: minor trace logging improvements
* commands: reinit: set exec context attrs to defaults
-------------------------------------------------------------------
Thu Jul 27 07:25:56 UTC 2023 - Steve Kowalik <steven.kowalik@suse.com>
- Switch to setuptools_scm, rather than setuptools_scm_git_archive.
- Switch to pyproject macros.
- Stop using greedy globs in %files.
-------------------------------------------------------------------
Wed May 20 07:26:37 UTC 2020 - Petr Gajdos <pgajdos@suse.com>
- %python3_only -> %python_alternative
-------------------------------------------------------------------
Tue Sep 10 12:47:32 UTC 2019 - Tomáš Chvátal <tchvatal@suse.com>
- Update to 0.22.0:
* Fixed regression with Cypress PSoC6 targets (#680) and merged in cumulative PSoC6 updates from Cypress.
* Resolved a number of issues (but not all) with NXP LPC55S69.
* Update ST NUCLEO-H743ZI.
* Correct the wrong part number for MIMXRT1064-EVK board.
* Correct part number for ST NUCLEO-WB55RG board.
* Fix location of input data for flash algorithms in STM32F412xx target.
* Address an issue with the built-in target STM32L031x6 by disabling double buffered flash programming.
-------------------------------------------------------------------
Tue Jul 23 10:48:33 UTC 2019 - Tomáš Chvátal <tchvatal@suse.com>
- Update to 0.21.0:
* Too many changes to enumerate
-------------------------------------------------------------------
Tue Dec 4 12:52:32 UTC 2018 - Matej Cepl <mcepl@suse.com>
- Remove superfluous devel dependency for noarch package
-------------------------------------------------------------------
Sun Apr 1 01:33:46 UTC 2018 - afaerber@suse.de
- Convert to singlespec
- Update to v0.8.1a1
-------------------------------------------------------------------
Wed Jan 7 17:22:28 UTC 2015 - afaerber@suse.de
- Drop py2pack-generated conditional on suse_version (matejcik)
-------------------------------------------------------------------
Tue Jan 6 18:44:53 UTC 2015 - afaerber@suse.de
- Add runtime dependency on pyUSB
-------------------------------------------------------------------
Tue Jan 6 18:23:04 UTC 2015 - afaerber@suse.de
- Initial: v0.2
