File ipv6calc.spec of Package ipv6calc

Overview Repositories Revisions Requests Users Attributes Meta

File ipv6calc.spec of Package ipv6calc (Revision 57b59ea02beb58bc05eccb388115ff8e)

Currently displaying revision 57b59ea02beb58bc05eccb388115ff8e , Show latest

Summary:	IPv6 address format change and calculation utility
Name:		ipv6calc
Version:	0.92.0
Release:	1
Group:		Productivity/Networking/Other
URL:		http://www.deepspace6.net/projects/ipv6calc.html
License:	GNU GPL version 2
Source:		ftp://ftp.bieringer.de/pub/linux/IPv6/ipv6calc/ipv6calc-%{version}.tar.bz2

BuildRoot: %{_tmppath}/ipv6calc-root

%define enable_geoip 0
%define enable_ip2location 0

%{?_with_geoip: %{expand: %%define enable_geoip 1}}
%{?_with_ip2location: %{expand: %%define enable_ip2location 1}}

%if %{enable_geoip}
BuildRequires: GeoIP-devel
Requires: GeoIP
%endif

%if %{enable_ip2location}
BuildRequires: IP2Location-devel
Requires: IP2Location >= 2.1.3
%endif

%description
ipv6calc is a small utility which formats and calculates IPv6 addresses in
different ways.

Install this package, if you want to extend the existing address detection on
IPv6 initscript setup or make life easier in adding reverse IPv6 zones to DNS
or using in DNS queries like

dig -t ANY `ipv6calc -r 2001:db8:1234::1/48`

Many more format conversions are supported, see given URL for more.

Available rpmbuild rebuild options:
--with : ip2location
--with : geoip

%prep
%setup -q -n ipv6calc-%{version}

%build
./configure --bindir=%{_bindir} --mandir=%{_mandir} %{?_with_ip2location:--enable-ip2location} %{?_with_geoip:--enable-geoip}
make clean
make

%check
make test-minimal

%install
rm -rf $RPM_BUILD_ROOT

make install DESTDIR=$RPM_BUILD_ROOT

# Move ipv6calc
mkdir -p $RPM_BUILD_ROOT/bin
mv $RPM_BUILD_ROOT%{_bindir}/ipv6calc $RPM_BUILD_ROOT/bin/ipv6calc

## Install examples and helper files

mkdir -p $RPM_BUILD_ROOT%{_docdir}/%{name}/

# ipv6logconv
mkdir -p $RPM_BUILD_ROOT%{_docdir}/%{name}/ipv6logconv
cp -r examples/analog/* $RPM_BUILD_ROOT%{_docdir}/%{name}/ipv6logconv/

# ipv6loganon
mkdir -p $RPM_BUILD_ROOT%{_docdir}/%{name}/ipv6loganon
pushd ipv6loganon
cp README $RPM_BUILD_ROOT%{_docdir}/%{name}/ipv6loganon/
popd

# ipv6logstats
mkdir -p $RPM_BUILD_ROOT%{_docdir}/%{name}/ipv6logstats
pushd ipv6logstats
cp README example_* collect_ipv6logstats.pl $RPM_BUILD_ROOT%{_docdir}/%{name}/ipv6logstats
for dir in examples-data examples-gri; do
	cp -r $dir $RPM_BUILD_ROOT%{_docdir}/%{name}/ipv6logstats
done
popd

# ipv6calcweb
mkdir -p $RPM_BUILD_ROOT%{_docdir}/%{name}/ipv6calcweb
pushd ipv6calcweb
cp USAGE ipv6calcweb.cgi $RPM_BUILD_ROOT%{_docdir}/%{name}/ipv6calcweb
popd

# Docs
for f in ChangeLog README CREDITS TODO COPYING LICENSE USAGE doc/ipv6calc.lyx doc/ipv6calc.sgml doc/ipv6calc.html; do
	cp $f $RPM_BUILD_ROOT%{_docdir}/%{name}/
done

# Remove all CVS files
find $RPM_BUILD_ROOT%{_docdir}/%{name} -type d -name CVS |xargs rm -rf

%clean
rm -rf $RPM_BUILD_ROOT

%files
%defattr(-,root,root)

# binaries
/bin/ipv6calc
%{_bindir}/ipv6logconv
%{_bindir}/ipv6logstats
%{_bindir}/ipv6loganon

# man pages
%{_mandir}/man8/*

# docs, examples and helper
%dir %{_docdir}/%{name}
%{_docdir}/%{name}/*

%changelog
* Mon Oct 10 2011 - Sven Uebelacker <sven@uebelacker.net> 0.92.0
- update to 0.92.0

* Thu May 26 2011 - Sven Uebelacker <sven@uebelacker.net> 0.90.0
- minor changes like ability to read addresses from stdin
- update to 0.90.0

* Fri May 06 2011 - Sven Uebelacker <sven@uebelacker.net> 0.82.1
- update to 0.82.1

* Wed Mar 30 2011 - Sven Uebelacker <sven@uebelacker.net> 0.82.0
- update to 0.82.0 add support for RFC 6052 (NAT64)

* Mon Feb 28 2011 - Sven Uebelacker <sven@uebelacker.net> 0.81.0
- update to 0.81.0 stricter input validation (Debian Bug #612489)

* Wed Sep 23 2010 - Sven Uebelacker <sven@uebelacker.net> 0.80.0
- update to 0.80.0 fixing calculation bug of revnibbles.arpa

* Wed Jun 23 2010 - Sven Uebelacker <sven@uebelacker.net> 0.73.0
- ported version 0.73.0 to openSUSE

* Wed Nov 19 2008 Peter Bieringer <pb@bieringer.de>
- switch from "make installonly" to "make install"

* Wed Feb 14 2007 Peter Bieringer <pb@bieringer.de>
- remove support for build option --with-geoip-system
- add support for 'ipv6loganon'

* Sat Oct 28 2006 Peter Bieringer <pb@bieringer.de>
- add support for build option --with-geoip-system

* Sun Aug 06 2006 Peter Bieringer <pb@bieringer.de>
- add support for build option --with-geoip

* Wed Jun 07 2006 Peter Bieringer <pb@bieringer.de>
- add support for build option --with-ip2location

* Wed Jul 20 2005 Peter Bieringer <pb@bieringer.de>
- adjust code because of use of /usr/bin in Makefile of ivp6calc

* Sat Oct 30 2004 Peter Bieringer <pb@bieringer.de>
- remove openssl(-devel) from requirements, no longer needed

* Fri Nov 22 2003 Peter Bieringer <pb@bieringer.de>
- adjustments

* Fri Nov 21 2003 Peter Bieringer <pb@bieringer.de>
- add ipv6logstats
- add man pages
- add configure options

* Tue Nov 11 2002 Peter Bieringer <pb@bieringer.de>
- change IPv6 address in description

* Sat Apr 20 2002 Peter Bieringer <pb@bieringer.de>
- Change URL

* Mon Apr 07 2002 Peter Bieringer <pb@bieringer.de>
- add more analog example files

* Mon Apr 05 2002 Peter Bieringer <pb@bieringer.de>
- remove BuildRequires extension, not needed for normal build

* Mon Mar 24 2002 Peter Bieringer <pb@bieringer.de>
- extend BuildRequires for perl /usr/bin/aggregate wget

* Mon Mar 18 2002 Peter Bieringer <pb@bieringer.de>
- add ipv6calcweb.cgi

* Mon Mar 16 2002 Peter Bieringer <pb@bieringer.de>
- add ipv6logconv, analog examples

* Mon Mar 11 2002 Peter Bieringer <pb@bieringer.de>
- Add perl to buildrequire and openssl to require

* Mon Jan 21 2002 Peter Bieringer <pb@bieringer.de>
- Add LICENSE + COPYING file

* Thu Dec 27 2001 Peter Bieringer <pb@bieringer.de>
- Add comment header
- Add call to configure on build

* Tue Dec 18 2001 Peter Bieringer <pb@bieringer.de>
- Replace hardwired version number with autoconf/configure variable

* Wed Apr 25 2001 Peter Bieringer <pb@bieringer.de>
- Fix permissions of doc files

* Thu Mar 15 2001 Peter Bieringer <pb@bieringer.de>
- Add doc directory also to files to make sure the directory will be removed
   on update or deinstall
- change install permissions for entries in doc directory
- change "make install" to "make installonly" (make test should be only executed once"

* Wed Mar 14 2001 Peter Bieringer <pb@bieringer.de>
- Add "make clean" and "make test" on build

* Tue Mar 13 2001 Peter Bieringer <pb@bieringer.de>
- add CREDITS and TODO for install

* Sat Mar 10 2001 Peter Bieringer <pb@bieringer.de>
- enable "URL"

* Sun Mar 04 2001 Peter Bieringer <pb@bieringer.de>
- change install location to /bin

* Tue Feb 27 2001 Peter Bieringer <pb@bieringer.de>
- review for new release, now named "ipv6calc"
- review install section for RedHat 7.0.91

* Sun Feb 25 2001 Peter Bieringer <pb@bieringer.de>
- initial build

Places

File ipv6calc.spec of Package ipv6calc (Revision 57b59ea02beb58bc05eccb388115ff8e)

Places