File 0001-arm64-dts-freescale-add-i.MX93-11x11-FRDM-board-supp.patch of Package imx93-devicetree
From d104a3ab11a7dac0374b7768a309ff9d602ba3c9 Mon Sep 17 00:00:00 2001
From: "Ivan T. Ivanov" <iivanov@suse.de>
Date: Fri, 21 Feb 2025 14:14:41 +0200
Subject: [PATCH] arm64: dts: freescale: add i.MX93 11x11 FRDM board support
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
---
.../boot/dts/freescale/imx93-11x11-frdm.dts | 905 ++++++++++++++++++
arch/arm64/boot/dts/freescale/imx93.dtsi | 7 +
2 files changed, 912 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
new file mode 100644
index 0000000..aa6972d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
@@ -0,0 +1,905 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx93.dtsi"
+
+/ {
+ model = "NXP i.MX93 11X11 FRDM board";
+ compatible = "fsl,imx93-11x11-frdm", "fsl,imx93";
+
+ aliases {
+ ethernet0 = &fec;
+ ethernet1 = &eqos;
+ };
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ alloc-ranges = <0 0x80000000 0 0x30000000>;
+ size = <0 0x10000000>;
+ linux,cma-default;
+ };
+
+ vdev0vring0: vdev0vring0@a4000000 {
+ reg = <0 0xa4000000 0 0x8000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@a4008000 {
+ reg = <0 0xa4008000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring0: vdev1vring0@a4010000 {
+ reg = <0 0xa4010000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring1: vdev1vring1@a4018000 {
+ reg = <0 0xa4018000 0 0x8000>;
+ no-map;
+ };
+
+ rsc_table: rsc-table@2021e000 {
+ reg = <0 0x2021e000 0 0x1000>;
+ no-map;
+ };
+
+ vdevbuffer: vdevbuffer@a4020000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa4020000 0 0x100000>;
+ no-map;
+ };
+
+ ele_reserved: ele-reserved@a4120000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa4120000 0 0x100000>;
+ no-map;
+ };
+ };
+
+ reg_can2_stby: regulator-can2-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can2-stby";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pcal6524 23 GPIO_ACTIVE_LOW>;
+ enable-active-low;
+ };
+
+ reg_vref_1v8: regulator-adc-vref {
+ compatible = "regulator-fixed";
+ regulator-name = "vref_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ off-on-delay-us = <12000>;
+ enable-active-high;
+ };
+
+ reg_vdd_12v: regulator-vdd-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "reg_vdd_12v";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&pcal6524 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usdhc3_vmmc: regulator-usdhc3 {
+ compatible = "regulator-fixed";
+ regulator-name = "WLAN_EN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+ /*
+ * IW612 wifi chip needs more delay than other wifi chips to complete
+ * the host interface initialization after power up, otherwise the
+ * internal state of IW612 may be unstable, resulting in the failure of
+ * the SDIO3.0 switch voltage.
+ */
+ startup-delay-us = <20000>;
+ enable-active-high;
+ };
+
+ usdhc3_pwrseq: usdhc3_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset = <&pcal6524 12 GPIO_ACTIVE_LOW>;
+ };
+
+ sound-mqs {
+ compatible = "fsl,imx6sx-sdb-mqs",
+ "fsl,imx-audio-mqs";
+ model = "mqs-audio";
+ audio-cpu = <&sai1>;
+ audio-codec = <&mqs1>;
+ };
+
+ sw-keys {
+ compatible = "gpio-keys";
+
+ K2: user_btn1 {
+ label = "User Button1";
+ linux,code = <BTN_1>;
+ gpios = <&pcal6524 5 GPIO_PULL_UP>;
+ interrupt-parent = <&pcal6524>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ K3: user_btn2 {
+ label = "User Button2";
+ linux,code = <BTN_2>;
+ gpios = <&pcal6524 6 GPIO_PULL_UP>;
+ interrupt-parent = <&pcal6524>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+};
+
+&sai1 {
+ #sound-dai-cells = <0>;
+ clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_DUMMY>, <&clk IMX93_CLK_AUDIO_PLL>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k";
+ assigned-clocks = <&clk IMX93_CLK_SAI1>;
+ assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+ assigned-clock-rates = <24576000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
+&mqs1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mqs1>;
+ clocks = <&clk IMX93_CLK_MQS1_GATE>;
+ clock-names = "mclk";
+ status = "okay";
+};
+
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&cm33 {
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&mu1 0 1>,
+ <&mu1 1 1>,
+ <&mu1 3 1>;
+ memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+ <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+ fsl,startup-delay-ms = <500>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ pinctrl-1 = <&pinctrl_flexcan2_sleep>;
+ xceiver-supply = <®_can2_stby>;
+ status = "okay";
+};
+
+&mu1 {
+ status = "okay";
+};
+
+&mu2 {
+ status = "okay";
+};
+
+&eqos {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_eqos>;
+ pinctrl-1 = <&pinctrl_eqos_sleep>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy1>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <5000000>;
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_fec>;
+ pinctrl-1 = <&pinctrl_fec_sleep>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy2>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <5000000>;
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ eee-broken-1000t;
+ reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ };
+ };
+};
+
+/*
+ * When add, delete or change any target device setting in &lpi2c1,
+ * please synchronize the changes to the &i3c1 bus in imx93-11x11-evk-i3c.dts.
+ */
+&lpi2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c1>;
+ pinctrl-1 = <&pinctrl_lpi2c1>;
+ status = "okay";
+
+ pcal6408: gpio@20 {
+ compatible = "nxp,pcal9554b";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <®_usdhc3_vmmc>;
+ status = "okay";
+ };
+
+};
+
+&lpi2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c2>;
+ pinctrl-1 = <&pinctrl_lpi2c2>;
+ status = "okay";
+
+ pmic@25 {
+ compatible = "nxp,pca9451a";
+ reg = <0x25>;
+ interrupt-parent = <&pcal6524>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <2237500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck4: BUCK4{
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5: BUCK5{
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6: BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5: LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ pcal6524: gpio@22 {
+ compatible = "nxp,pcal6524";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcal6524>;
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&lpi2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ pinctrl-1 = <&pinctrl_lpi2c3>;
+ status = "okay";
+
+ pcf2131: rtc@53 {
+ compatible = "nxp,pcf2131";
+ reg = <0x53>;
+ interrupt-parent = <&pcal6524>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ status = "okay";
+ };
+
+ ptn5110: tcpc@50 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x50>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ status = "okay";
+
+ port {
+ typec1_dr_sw: endpoint {
+ remote-endpoint = <&usb1_drd_sw>;
+ };
+ };
+
+ typec1_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 20000, 3000)>;
+ op-sink-microwatt = <15000000>;
+ self-powered;
+ };
+ };
+};
+
+&lpuart1 { /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&lpuart5 {
+ /* BT */
+ pinctrl-names = "default";
+ pinctrl-assert-gpios = <&pcal6524 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "nxp,88w8987-bt";
+ };
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ usb-role-switch;
+ disable-over-current;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ status = "okay";
+
+ port {
+ usb1_drd_sw: endpoint {
+ remote-endpoint = <&typec1_dr_sw>;
+ };
+ };
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ status = "okay";
+
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
+ cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+ fsl,cd-gpio-wakeup-disable;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ bus-width = <4>;
+ status = "okay";
+ no-sdio;
+ no-mmc;
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
+ pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
+ mmc-pwrseq = <&usdhc3_pwrseq>;
+ vmmc-supply = <®_usdhc3_vmmc>;
+ pinctrl-assert-gpios = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ keep-power-in-suspend;
+ non-removable;
+ wakeup-source;
+ status = "okay";
+
+ wifi-wake-host {
+ compatible = "nxp,wifi-wake-host";
+ interrupt-parent = <&gpio3>;
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "host-wake";
+ };
+};
+
+&ocotp {
+ imx93_uid: soc-uid@c0 {
+ reg = <0xc0 0x10>;
+ };
+
+ imx93_soc: imx93-soc {
+ compatible = "fsl,imx93";
+ nvmem-cells = <&imx93_uid>;
+ nvmem-cell-names = "soc_unique_id";
+ };
+};
+
+&wdog3 {
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&tpm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led1>;
+ status = "okay";
+};
+
+&tpm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led2>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e
+ MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e
+ MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
+ MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
+ MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
+ MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
+ MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x58e
+ MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
+ MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e
+ MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e
+ MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e
+ MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e
+ MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e
+ MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e
+ >;
+ };
+
+ pinctrl_eqos_sleep: eqosgrpsleep {
+ fsl,pins = <
+ MX93_PAD_ENET1_MDC__GPIO4_IO00 0x31e
+ MX93_PAD_ENET1_MDIO__GPIO4_IO01 0x31e
+ MX93_PAD_ENET1_RD0__GPIO4_IO10 0x31e
+ MX93_PAD_ENET1_RD1__GPIO4_IO11 0x31e
+ MX93_PAD_ENET1_RD2__GPIO4_IO12 0x31e
+ MX93_PAD_ENET1_RD3__GPIO4_IO13 0x31e
+ MX93_PAD_ENET1_RXC__GPIO4_IO09 0x31e
+ MX93_PAD_ENET1_RX_CTL__GPIO4_IO08 0x31e
+ MX93_PAD_ENET1_TD0__GPIO4_IO05 0x31e
+ MX93_PAD_ENET1_TD1__GPIO4_IO04 0x31e
+ MX93_PAD_ENET1_TD2__GPIO4_IO03 0x31e
+ MX93_PAD_ENET1_TD3__GPIO4_IO02 0x31e
+ MX93_PAD_ENET1_TXC__GPIO4_IO07 0x31e
+ MX93_PAD_ENET1_TX_CTL__GPIO4_IO06 0x31e
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e
+ MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x57e
+ MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e
+ MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
+ MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e
+ MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e
+ MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x58e
+ MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
+ MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e
+ MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e
+ MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e
+ MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e
+ MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e
+ MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e
+ >;
+ };
+
+ pinctrl_fec_sleep: fecsleepgrp {
+ fsl,pins = <
+ MX93_PAD_ENET2_MDC__GPIO4_IO14 0x51e
+ MX93_PAD_ENET2_MDIO__GPIO4_IO15 0x51e
+ MX93_PAD_ENET2_RD0__GPIO4_IO24 0x51e
+ MX93_PAD_ENET2_RD1__GPIO4_IO25 0x51e
+ MX93_PAD_ENET2_RD2__GPIO4_IO26 0x51e
+ MX93_PAD_ENET2_RD3__GPIO4_IO27 0x51e
+ MX93_PAD_ENET2_RXC__GPIO4_IO23 0x51e
+ MX93_PAD_ENET2_RX_CTL__GPIO4_IO22 0x51e
+ MX93_PAD_ENET2_TD0__GPIO4_IO19 0x51e
+ MX93_PAD_ENET2_TD1__GPIO4_IO18 0x51e
+ MX93_PAD_ENET2_TD2__GPIO4_IO17 0x51e
+ MX93_PAD_ENET2_TD3__GPIO4_IO16 0x51e
+ MX93_PAD_ENET2_TXC__GPIO4_IO21 0x51e
+ MX93_PAD_ENET2_TX_CTL__GPIO4_IO20 0x51e
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO25__CAN2_TX 0x139e
+ MX93_PAD_GPIO_IO27__CAN2_RX 0x139e
+ >;
+ };
+ pinctrl_flexcan2_sleep: flexcan2sleepgrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO25__GPIO2_IO25 0x31e
+ MX93_PAD_GPIO_IO27__GPIO2_IO27 0x31e
+ >;
+ };
+
+
+ pinctrl_lpi2c1: lpi2c1grp {
+ fsl,pins = <
+ MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
+ MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c2: lpi2c2grp {
+ fsl,pins = <
+ MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
+ MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
+ MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_pcal6524: pcal6524grp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
+ MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e
+ MX93_PAD_DAP_TDI__LPUART5_RX 0x31e
+ MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e
+ MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio_sleep: usdhc2gpiogrpsleep {
+ fsl,pins = <
+ MX93_PAD_SD2_CD_B__GPIO3_IO00 0x51e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_sleep: usdhc2grpsleep {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__GPIO3_IO01 0x51e
+ MX93_PAD_SD2_CMD__GPIO3_IO02 0x51e
+ MX93_PAD_SD2_DATA0__GPIO3_IO03 0x51e
+ MX93_PAD_SD2_DATA1__GPIO3_IO04 0x51e
+ MX93_PAD_SD2_DATA2__GPIO3_IO05 0x51e
+ MX93_PAD_SD2_DATA3__GPIO3_IO06 0x51e
+ MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x51e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe
+ >;
+ };
+
+ pinctrl_usdhc3_sleep: usdhc3grpsleep {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__GPIO3_IO20 0x31e
+ MX93_PAD_SD3_CMD__GPIO3_IO21 0x31e
+ MX93_PAD_SD3_DATA0__GPIO3_IO22 0x31e
+ MX93_PAD_SD3_DATA1__GPIO3_IO23 0x31e
+ MX93_PAD_SD3_DATA2__GPIO3_IO24 0x31e
+ MX93_PAD_SD3_DATA3__GPIO3_IO25 0x31e
+ >;
+ };
+
+ pinctrl_usdhc3_wlan: usdhc3wlangrp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e
+ >;
+ };
+
+ pinctrl_mqs1: mqs1grp {
+ fsl,pins = <
+ MX93_PAD_PDM_CLK__MQS1_LEFT 0x31e
+ MX93_PAD_PDM_BIT_STREAM0__MQS1_RIGHT 0x31e
+ >;
+ };
+
+
+ pinctrl_lpspi3: lpspi3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO08__GPIO2_IO08 0x3fe
+ MX93_PAD_GPIO_IO09__LPSPI3_SIN 0x3fe
+ MX93_PAD_GPIO_IO10__LPSPI3_SOUT 0x3fe
+ MX93_PAD_GPIO_IO11__LPSPI3_SCK 0x3fe
+ >;
+ };
+ pinctrl_led1: ledsgrp1 {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO04__TPM3_CH0 0x02
+ MX93_PAD_GPIO_IO12__TPM3_CH2 0x02
+ >;
+ };
+ pinctrl_led2: ledsgrp2 {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO13__TPM4_CH2 0x02
+ >;
+ };
+};
+
+&lpspi3 {
+ fsl,spi-num-chipselects = <1>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpspi3>;
+ pinctrl-1 = <&pinctrl_lpspi3>;
+ cs-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+ pinctrl-assert-gpios = <&pcal6408 0 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ spidev0: spi@0 {
+ reg = <0>;
+ compatible = "lwn,bk4";
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&ele_if0 {
+ memory-region = <&ele_reserved>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 56766fd..c5d7e49 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -1340,4 +1340,11 @@
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
};
};
+
+ ele_if0: secure-enclave {
+ compatible = "fsl,imx93-se";
+ mbox-names = "tx", "rx";
+ mboxes = <&s4muap 0 0>,
+ <&s4muap 1 0>;
+ };
};
--
2.43.0
