openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File uhd.changes of Package uhd3_15 (Revision 35e388cf53f6b94cd0fdc6f058e17583)

Currently displaying revision 35e388cf53f6b94cd0fdc6f058e17583 , Show latest

-------------------------------------------------------------------
Thu Sep 10 21:30:11 UTC 2020 - Wojciech Kazubski <wk@ire.pw.edu.pl>

- fixed build for Tumbleweed with boost 1.74

-------------------------------------------------------------------
Wed Apr 22 11:34:53 UTC 2020 - Wojciech Kazubski <wk@ire.pw.edu.pl>

- fixed build for Tumbleweed after python 2 removal

-------------------------------------------------------------------
Fri Apr 17 12:28:25 UTC 2020 - Wojciech Kazubski <wk@ire.pw.edu.pl>

- utils moved to /usr/bin

-------------------------------------------------------------------
Fri Jan 10 23:40:17 UTC 2020 - Wojciech Kazubski <wk@ire.pw.edu.pl>

- update to 3.15.0.0
  * N320: Fix MCR initialization, fix checks for LO distribution board,
    reset RX IQ balance on init, replace DRAM FIFO with replay block,
    improve constraints, fix I/Q imbalance compensation, add FPGPIO control
  * N310: increase default dc offset averaging window, make tunes
    asynchronous, add capability to control RF filter bypass and freq.band
    limits, fix setting user DB EEPROM, correctly report N321 vs N320,
    improve DDR3 BIST, update max revision to 7, fix DMA arbitration to
    use contiguous packets, replace DRAM FIFO with replay block, fix SFP
    link up status, add workaround for clocking interference with external
    reference clocks, disable gpsdo clock/time source options when
    enable_gps=0
  * X300: Fix max bitfile size, fix GPIO ATR property access type, heavily
    refactor, introduce conn_mgr, add DPDK support, add
    capability to flash NI-2974 FPGA, fix clocking code, enable 11.52 MHz
    and 23.04 MHz system ref rates, improve usage of constrained device
    args, enable ADC gain through RFNoC API, add mode to set master clock
    rate to arbitrary values between 184.32 and 200 MHz, throttle
    muxed_zero_copy_if
  * E320: Fix time source clobbering ref source, add support for RevE, fix
    reporting of FPGA version hash, fix SFP link up status, fix missing
    ce_clk driver
  * E310: Convert to MPM architecture, fix uhd_image_loader usage, fix DMA
    arbitration to use contiguous packets, reduced DMA chans to 4 (using
    data stream muxing), fix DRAM_TEST target build
  * E3xx: Correct frontend name in devtest
  * B200: Add command to query bootloader status, fix sc12 streaming, fix
    FIFO sizes on GPIFII interface
  * UBX: add temperature compensation mode
  * SBX: Only update ATRs when lock state changes
  * TwinRX: add LO charge pump properties, increase default charge pump
    value on LO1, add low spur tuning mode, fix duplicate write to N value
    in DDC
  * RFNoC/device3: Read command FIFO size from device instead of
    hardcoding values, fix multidevice graph connections, ENABLE_RFNOC now
    defaults to ON, search all nodes for tick rate, add update_graph()
    call which lets blocks do a graph-wide update of properties, fix
    missing port arg in SR_WRITE Noc-Script call, constrain
    send/recv_frame_size baed on MTU, fix flushing on init/deinit, disable
    FC ACKs for lossless links
  * RFNOC/FPGA: Fix rb_stb in split stream block, fix off-by-one error in
    the window block, fix phase reset and -accumulator for DDC and DUC
    blocks, fix flushing on split-stream block, fix DC offset issue with
    DDS by using proper rounding, fix DUC/DDC sample rate switching by
    latching N on M in axi_rate_change, various fixes to
    uhd_image_builder, fix MTU settings in blocks, align byte count to
    8-byte word
  * RFNOC: Allow UHD_RFNOC_DIR to contain multiple paths
  * Python API: Replace Boost.Python with PyBind11, fix benchmark_rate
    statistics, fix phase alignment test script
  * Python API: Added include of complex.h to allow pybind to convert
    complex data types
  * Python API: Make multi_usrp::get_*_usrp_info() return a Python dict
  * Python API: Fix array processing in send_waveforms()
  * UHD: Allow ignoring fallthrough warnings, reduce Boost footprint,
    remove gpsd dependency, improve streaming, reduced the number of
    compiler warnings, introduce pop() to the prop tree, add typecast
    operator from uhd::dict<> to std::map<>, properly cache config file
    data
  * MPM/mpmd: Introduce compatible rev numbers to support future hardware,
    fix some resource leaks in mpmd, fix spurious reclaims causing
    unnecessary warnings, fix resource leaks in liberio xport, allow to
    mux data streams over liberio transports (e.g. to require fewer DMA
    channels on E310), wait for DPDK links to come up before proceeding,
    relax failure handling when updating components (fixes spurious errors
    when updating FPGA images over SFP), fix issue where RPC
    initialization would hang on failure
  * MPM: Re-enable RPC server timeouts after components have been updated
  * MPMD: Remove arbitraty frame size defaults for UDP transports
  * MPMD: Fix incorrect link rate warnings
  * FPGA: Use new device-tree overlay syntax, upgraded to Vivado 2018.3,
    broke various paths with critical timing, allow SystemVerilog source
    files, improve viv_modify_bd and viv_modify_tcl_bd, fix resets on 2clk
    FIFOs
  * USB: Allow cancelled USB requests to occur
  * USB: Fix global session race condition
  * Logging: Always honour log level, don't log colours for non-ttys, fix
    includes, demote various log messages, fix logging colours, fix
    deadlock on Windows machines
  * Examples: Fix benchmark_rate INIT_DELAY, fix memory leak in
    tx_samples_c
  * Examples: Remove thread priority elevation
  * Examples: Add options to benchmark_rate for start delays and priority
  * Tests: Make the Python interpreter for devtests a parameter, add unit
    tests to MPM
  * Utilities: Fix converter benchmark for Py3k and scaling issue
  * Tools: Fix kitchen_sink
  * Tools: Fix Wireshark dissectors to work with WS1, 2, and 3
  * Tools: Various fixes to FPGA functional verification tests
  * Docs: Various fixes, fix Doxygen warnings, fix links to KB, update
  * DPDK information about building libraries, add DPDK subsection about
    thread priorities, update testing procedures
  * C API: Add uhd_get_abi_string, uhd_get_version_string
  * CMake: Make manpage compression optional, allow setting of PKG_DOC_DIR
    from the CMake commandline, add replay example, fix missing 'project',
    replace ENABLE_PYTHON3 with a simpler Python detection, clean up
    superfluous modules, improve log statements, bump dependency min
    versions, add MPM unit testing, fix missing BIGOBJ for MSVC, add our
    own UHDBoost.cmake to better find Boost across versions and systems,
    constrain DPDK check to exact version
  * Formatting: Apply clang-format to all files, break after template

-------------------------------------------------------------------
Sat Aug 24 06:56:27 UTC 2019 - Wojciech Kazubski <wk@ire.pw.edu.pl>

- disabled tests as they break the build
- patch uhd-fix-for-gpsd-3.18.patch removed - code modifed to work
  with latest gpsd
- patch uhd-fix-for-boost-1_67.patch removed - applied upstream
- update to 3.14.1.0
  * N320: Terminate the DAC when not transmitting
  * E320: Add support for rev E
  * E320: Added .gitignore for FPGA build products
  * X300: Add DPDK support
  * X300: add capability to flash NI-2974 FPGA
  * X300: Broke two critical timing paths in FPGA
  * X300: fixed udp WSA buffer size assignment issue
  * E310: Fix DRAM_TEST target build
  * B200: Add bootloader for FX3 (fix for B2xx failing to enumerate)
  * TwinRX: Expose charge pump current for LO2
  * TwinRX: Add low spur mode for LO2
  * TwinRX: increase rev c lo1 charge pump default value
  * TwinRX: Fix tick rate
  * Device3: Constraint send/recv_frame_size based on down/upstream MTU
  * Device3: Fix MTU and default frame sizes
  * RFNoC: Search all nodes for tick rates
  * RFNoC: Change default address for the reg readbacks
  * uhd_image_builder: Let the OOT module point to folders not named "rfnoc"
  * uhd_image_builder: Add --auto-inst-src
  * MPMD: Fix spurious reclaim call after unclaim
  * MPMD: Release resources on destruction
  * MPM: Add SW/HW compat
  * liberio: Release context holder on destruction of last liberio xport
  * transport: fixed a pre-mature buffer reset
  * nirio: Fix typo in nirio_zero_copy
  * GPSD: fix API for 'gps_read'
  * AD9361: Fix return values for tune and set_clock_rate
  * DUC/DDC: Fix phase reset and accumulation
  * cores: Use NSDMI consistently in ?x_dsp_core_3000.*
  * Logging: fix deadlock issue on Windows machines
  * Logging: Fix ANSI colour codes
  * Utils: Add X300/X310 reset utility
  * Docs: Improved Windows-related build instructions
  * Docs: Add link to README for building custom filesystems for N3xx
  * sim: Fixing the port number in use for connection
  * tools: Fix for proj creation in ip_utils for tcl-based IP
  * tests: Fix mock_ctrl_iface for 32-bit MSVC
- update to 3.14.0.0
  * N320: Add support for N320 and N321
  * USRP-2974: Add support for USRP-2974
  * DPDK: Add DPDK-based sockets-like library (for N3xx)
  * N3xx: clocking API changes for transitioning clock and time sources
  * N3xx: Bump max rev to G/6
  * N3xx: Improve error messages for invalid clock/time settings
  * N3xx: Get RFNoC crossbar baseport from FPGA
  * N3xx: init peripherals before loading FPGA (to fix SFP0 init issues)
  * N3xx: Move Linux kernel to 4.15
  * N3xx/E320: Prepend SDK filename with device namev
  * N3xx: Update max rev to 7 (H)
  * N3xx: Remove DDR3 from standard BIST collection
  * N3xx: BIST: Improve DDR3 BIST to check for DmaFIFO
  * N3xx: BIST: Auto-load the AA image for the ddr3 BIST
  * N3xx: BIST: DDR3 test only enumerates first block
  * N310: Modify AD9371 reset function to keep it in reset
  * N310: move init_rf_cal before JESD de/framer bringup
  * N310: Fix sporadic power on failures (requires firmware update)
  * E3xx: Increase spp limit for E3xx radio
  * E320: bist: Fix ref_clock lock test implementation
  * E320: bist: Add link_up test
  * E320: Add all 5 temp sensors, fan sensor and rssi sensors per channel
  * E320: Fix tx/rx atr - antenna and frequency settings
  * E320: Enable devtest for E320
  * E320: images: Separate images package for Aurora image
  * E320: Get RFNoC crossbar baseport from FPGA
  * E320: add fpga_version_hash to e320 device info
  * E310: Fix initialization of antenna and frequency values
  * E31x: Destruct RFNoC before loading idle image
  * X300: Reduce default send_frame_size to 4000 over Ethernet
  * X300: Change Ethernet buffering
  * X300: Log git hash and compat number as debug message
  * X300: Move defaults to their own header
  * X300: Use constrained_args
  * X300: Enable clock_source and time_source device args
  * X300: NIRIO: Demote RPC client cancel/abort to TRACE
  * X300: remove default_buff_args properties
  * X300: Remove 120 MHz master_clock_rate option
  * X300: Set minimum master clock rate to 184.32 MHz
  * X300: Factor our PID -> MB type and MB type -> product name mapping
  * X300: Remove usage of boost::bind
  * X300: Fix compiler warnings related to type conversions
  * X300: Fix tick and sample rate setting
  * X300: Enable ADC gain through RFNoC API
  * X300: Demote NIRIO rpc client start/stop log messages to DEBUG
  * X300: Enable 11.52 MHz and 23.04 MHz system ref rates
  * X300: Enable x300_device_args.to_string()
  * X300: Catch more inconsistencies in x300_device_args
  * X300: Removed invalid 200 MHz sysref rate
  * X300: Change PLL CP currents in x300_clock_ctrl
  * B200: Remove superfluous fake lambda
  * B200: Add support for user regs
  * B200: Fix compiler warnings related to type conversions
  * B100: Move fifo_ctrl_excelsior to b100 subdir
  * B100: Fix fifo_ctrl_excelsior not exiting
  * B100: Remove all Boostisms from fifo_ctrl_excelsior
  * B100: Demote some clocking-related log messages to trace
  * MPM: Get list of temperatures from all thermal zones
  * MPM: add link_speed xport_info
  * MPM: Add mpm_device as usrp_hwd module variable
  * MPM: Add usrp_update_fs
  * MPM: Add i2c APIs for simple transfers
  * MPM: Add vector-based transfer function for i2c
  * MPM: Add variable configuration support to nijesdcore
  * MPM: Add eyescan utility to nijesdcore
  * MPM: Add PRBS-31 testing to nijesdcore
  * MPM: Add convenience function to pull i2c bus from device tree
  * MPM: Open and close i2c file descriptor on every access
  * MPM: Multiprocessing instead of threading for claimer loop
  * MPM: Factor out user EEPROM code into own module
  * MPM: Add gpgga sensor function to GPSd iface
  * MPM: Add bridge mode support
  * MPM: Parameterize max UDP link allocation
  * MPM: xport: add commit_xport docstring
  * MPM: Improve error message on double-claim
  * MPMD: Parallelize broadcast-finding
  * MPMD: add option to enum rfnoc blocks from args
  * MPMD: add link speed to xport udp
  * MPMD: Add API to set RPC timeout atomically
  * MPMD: Move timeout constants to header
  * MPMD: Use new RPC API with timeout
  * MPMD: Increase claim_rpc call timeout
  * MPMD: implement get_*x_hints
  * MPMD: honor user supplied send/recv_frame_size args
  * MPMD: Use 4096 bytes for frame size for liberio transport
  * MPMD: Use init timeout for update_component
  * MPMD: Allow reclaim failures on component updates
  * MPMD: Fix typecast warning in property tree default settings
  * Device: Parallelize device discovery
  * Device3: Move from packet-based to byte-based flow control
  * Device3: Constrain send_buff_size to input fifo size
  * Device3: remove tx_hint[send_buff_size]
  * Device3: Replace NULL with 0 for empty function pointers
  * Device3: Remove redundant function call
  * Device3: Fix flow control window and interval
  * UHD: Release recv buffers earlier in rx_streamer
  * UHD: Fix ADF400x driver for ref counter and charge pump mode
  * UHD: Improve constrained_device_args_t
  * UHD API: Add multi_usrp::get_user_settings_iface()
  * UHD: Remove usage of time_t (except when required)
  * UHD: add default xport params to udp_zero_copy
  * UHD: Update rx_frontend_gen3.v controls for 1/4-rate mixer
  * UHD API: Move definition of ALL_MBOARDS and ALL_CHANS constants to
  * CPP file.
  * UHD: Add traffic counter to null source sink
  * UHD API: Add multi_usrp::set_sync_source() API
  * UHD: Improve documentation for the UHD exception types
  * UHD: Improve documentation for set_{time,clock,sync}_source
  * UHD: add .clang-format file
  * UHD: Add device arg to enable dual ethernet for tx
  * UHD API: Add sync source to Python API
  * UHD API: Add support for Tx LO control to C API
  * UHD: Improve compatibility of abs() calls
  * UHD: include <stdint.h> for int64_t for time_spec
  * UHD: Updates to coding guidelines
  * UHD: Fix MSVC warnings by changing a size_t to unsigned int or
    uint32_t
  * UHD: Add potentially missing but sometimes inferred include for
    experts
  * UHD: Add default xport params to udp_wsa_zero_copy
  * UHD: Move device3 flow control functions to header for benchmark
    utility
  * UHD: Make sure BOOST_VERSION is always available
  * UHD: Make clang-format skip formatting for some data structures
  * UHD: Remove vim hints in headers
  * UHD/MPM: Apply clang-format to all files
  * UHD: Add modified clang-format for headers
  * UHD: Replace uhd::math::log2 with std::log2
  * UHD: Replace boost::*::{lcm,gcd}() with portable versions
  * UHD API: Change get_{tx/rx}_dc_offset_range default from ALL_CHANS
    to 0
  * UHD: Revert to boost instead of std for sleep in some instances
  * UHD: Replace Boost macros with custom ones for endianness
  * UHD: muxed_zero_copy_if fixes
  * UHD: Replace Boost lock & mutex with std variety for AD9361 code
  * UHD: fix includes for boost::noncopyable
  * UHD: Fix buffer size warning on UDP transport
  * UHD: Remove duplicate operator=() for sid_t
  * UHD: Fix conversion warning in max287x
  * UHD: Fix various type-conversion compiler warnings
  * RFNoC: Convert SR_READBACK_REG_FIFOSIZE to bytes
  * RFNoC: Add ability to enable/disable RX timestamp
  * RFNoC: add async message handler
  * RFNoC: Changes to traffic counter register names
  * RFNoC: Fix replay example port args
  * RFNoC: Fix default SPP for replay
  * RFNoC: Add halt to replay API
  * RFNoC: Fix late packet errors
  * RFNoC: Fix detection of outstanding acks by ctrl_iface
  * RFNoC: Add some missing virtual destructors
  * RFNoC: Update FIFO XML definition
  * RFNoC: Prevent unnecessary FC ACK packets
  * RFNoC: More graph traversal fixes
  * RFNoC: Fix scaling of M and N values in DDC/DUC
  * RFNoC: Fix typos in legacy_compat
  * RFNoC: Limit number of control packets in flight
  * RFNoC: Disable FC ACK packets for lossless links
  * RFNoC: Add valid num_input_ports check to node_ctrl_base
  * Utils: Add Zip test to downloader
  * Utils: Factor wait_for_lo_lock() out of cal utils
  * Utils: Add check for gdb_eeprom before accessing
  * Utils: Deny positional options in uhd_image_loader
  * Utils: Set tx gain to max for rx iq cal
  * Tools: Add tool to analyze settling time of gain and freq changes
  * Tools: Make the UHD source gen a plugin for the phase alignment test
  * Test: Add Python API test
  * Test: Integrate Python API Tester into Devtest
  * Test: Add graph impl test to device3_test
  * Test: Retrofit sph test to use new mock transport
  * Test: Enable rx_samples_to_file in devtest for X300
  * Test: Fix CMake endif warning for devtest
  * Test: Fix compiler warning about unused timestamp
  * Test: Add #include in system time test
  * Test: Add benchmark of streaming code paths
  * Test: replace has_key by using 'in'
  * Test: Add universal_newlines to subprocess call in devtest
  * Examples: add rfnoc_radio_loopback example
  * Examples: Add benchmark_streamer example
  * Examples: Add dual measurements to benchmark_streamer
  * Examples: Clean up rfnoc_radio_loopback example
  * Examples: Add keyboard controls to rx_ascii_art_dft
  * Examples: Add benchmark_streamer support for multi-channel streamer
  * Examples: Optimize benchmark_rate start time
  * Examples: Improve formatting and comments in tx_waveforms
  * Examples: Optimize tx_waveforms memory allocations
  * Examples: change boost to std for time commands
  * Examples: Add LO Offset to rx_samples_to_file
  * Examples: update lo-offset naming in tx from file
  * Examples: Add lo-offset to tx_waveforms
  * Examples: Improved error message in tx_waveforms
  * Examples: Move ascii_art_dft main function within include guard
  * Examples: Fix boundary condition in ascii_art_dft plotting
  * Docs: Fix Doxygen warnings
  * Docs: Add info on how to implement user regs on B200
  * Docs: Add manual page on compat numbers
  * Docs: Add comments for TwinRX and MCR
  * Docs: N3xx page shell formatting and bb image
  * Docs: n3xx: fix Salt formatting
  * Docs: Add note on manually disabling NEON extensions
  * Docs: Fixed typos in N3xx image names (SD card build)
  * Docs: Add notes on external reference frequencies for X300
  * CMake: Bump CMake minimum version to 2.8.12
  * CMake: Change SOVERSION and VERSION for the library files
  * CMake: Extend list of additional Boost versions
  * CMake: fix variable usage
  * Cmake: remove Boost from dyn libs for tests on Apple
  * Cmake: Fix MSVC options (add /bigobj)
  * Cmake: Use native format for setup.py
  * CPack: Fix RPM generation

-------------------------------------------------------------------
Fri Jan 25 12:26:35 UTC 2019 - Wojciech Kazubski <wk@ire.pw.edu.pl>

- specfile cleanup

-------------------------------------------------------------------
Thu Jan 10 18:00:35 UTC 2019 - Wojciech Kazubski <wk@ire.pw.edu.pl>

- update to 3.13.1.0
  * E320: Fix front panel GPIO readback
  * E320: Fix master_clock_rate setting
  * E320: Print extra ouptut for ref_clock BIST
  * E320: Fix gps_locked type
  * E320: Fix return value of get_fpga_type()
  * N3xx: Enable setting clock and time sources at runtime
  * N3xx: Add ref_clock BIST
  * N3xx: Improve set_time_source() and set_clock_source()
  * N3xx: Add exception for init failure
  * N3xx: Remove HA, XA images packages
  * N3xx: Change init() procedure to reduce configuration time
  * N310: Add frequency bounds
  * N310: Fix RX antenna mapping
  * N310: Add log messages when re-initializing dboards
  * N310: Add skip_rfic argument to reduce time of BIST
  * N310: Add initialization of TX bandwidth
  * E310: Fix initialization of antenna and frequency values
  * E310: Type-cast fix for Boost
  * X300: Improve firmware compat error message
  * X300: Updated niusrprio driver
  * X300: Add recovery for duplicate IP addresses in EEPROM
  * X300: Prevent duplicate MAC and IP addresses from being programmed
  * X300: New mode to configure master clock rate
  * X300: Implement RFNoC get antenna functions
  * B2xx: Fix values of MASK_GPIO_SHDN_SW and GPIO_AUX_PWR_ON in firmware
  * B2xx: Revert changes to DSP core to fix scaling factor adjustment
  * B2xx: Restore asynchronous reset of AD936x
    (fixes LIBUSB_TRANSFER_OVERFLOW and unexpected sid errors)
  * TwinRX: enable ch1 lo amps if ch2 is using an external lo source
  * TwinRX: Correctly initialize antenna mapping on X300
  * TwinRX: Revise ADF5356 frac2 register calculation to prevent drifting spurs
  * TwinRX: Fix initialization
  * TwinRX: Tuning improvements
  * TwinRX: Enable phase resync on ADF535x
  * TwinRX: Make routing to LO1 and LO2 mutually exclusive
  * BasicRX/LFRX: Fix real mode in rx_frontend_core_3000
  * UHD: Define UHD_API as empty string when building static lib
  * UHD: Changed to 'all_matching' endpoint resolution for udp_simple transport
  * UHD: Add support for NEON SIMD
  * UHD: Fix usb_dummy_impl compilation in MSVC
  * UHD: Reconcile time_spec operators with boost concepts
  * UHD: Fix rounding in ddc/duc rate calculation
  * UHD: Increase MPMD RPC timeout when calling set_time_source()
  * UHD: Fix RX streamer SOB and EOB handling
  * UHD: Add UHD_SAFE_CALL to block_ctrl_base destructor
  * UHD: Change SOVERSION to ABI string and VERSION to full UHD version
  * UHD: Update cmake style to use lower case commands
  * UHD: Add SOURCE_DATE_EPOCH
  * UHD: Improve logic for UHD_IMAGES_DIR
  * UHD: Add RUNTIME_PYTHON_EXECUTABLE
  * UHD: Fix return value of get_rolloff() for filters
  * UHD: Properly register devtest
  * UHD: Fix log statement for Port number on RFNoC block
  * UHD: Use "MATCHES" instead of "STREQUAL" for "Clang"
  * UHD: Fix GPGGA string formatting for gpsd
  * Device3: Set default block control response SIDs
  * Device3: Fix block control flushing
  * RFNoC: Improved flushing mechanism in noc_shell and dma_fifo
  * RFNoC: Install missing dma_fifo_block_ctrl header
  * RFNoC: Replace some [] with .at() in radio_ctrl_impl
  * RFNoC: Fix graph traversal
  * MPM: Add Git hash, version to device info
  * MPM: Reset the RPC server upon reload
  * MPM: TDC: Update PDAC BIST and flatness test to use latest APIs
  * MPM: Fix handling of 0-valued dt-compat
  * MPM: Fix GPSD sensor names for N3xx and E320
  * MPM: Add args to update_ref_clock_freq to properly support dynamic setting
    of clock and time references
  * MPM: Fix Pylint warnings
  * MPM: Identify sysfs gpios more generically
  * MPM: Add lock_guard() function
  * MPM: Factor E320 and N3xx BIST code into common module
  * MPM: Add gpsd error handling
  * MPM: Add FPGA git hash to device info
  * MPMD: Increase RPC timeout during readng mb sensor
  * MPMD: Improve error message for compat number mismatches
  * Python API: Enable Python API on Windows
  * Python API: Change .dll to .pyd for Win32
  * Python API: Fixing Boost.Python initializer visibility
  * Python API: Fix duration of benchmark rate
  * Python API: Add missing constructors of time_spec_t
  * Python API: Expose streamer timeouts
  * Python API: Tighten the scope of releasing the GIL
  * Python API: Add device_addr_t
  * Python API: Populate the tune_result_t binding
  * Utils: Many fixes and enhancements for uhd_images_downloader
  * Utils: Update query_gpsdo_sensors to work on E310
  * Examples: Removed some legacy code patterns from RFNoC examples
  * Examples: Fix channel argument for rx_samples_to_file
  * Examples: Fix benchmark_rate MIMO synchronization
  * Examples: Add phase alignment example
  * Examples: Fix RX antenna not being applied in txrx_loopback_to_file
  * Test: Add more env vars, make Py3k compatible
  * Test: Add multi_usrp_test.py to devtest
  * Test: Clean up, refactor, and improve devtest
  * Test: Enable rx_samples_to_file in E320 devtest and N3xx devtest
  * Test: Reduce sample rate for E320 1G devtest
  * Test: Add unit test for eeprom_utils
  * Docs: Add clock_source and time_source to n3xx argument list and fix WR clock_source call
  * Docs: Minor tweaks to the Python API manual page
  * Docs: Add E320 test procedures
  * Docs: Added TwinRX page
  * Docs: Fix N210 MIMO Phase Alignment test command
  * Docs: Add E320 information
  * Docs: Improve sections on clock/time references
  * Docs: Add section on X300 motherboard clocking
  * Docs: Add more information on Salt for N3xx and E320
  * Docs: Adjust E310 functional verification tests
  * Docs: Add documentation on GIL release
- patch uhd-fix-for-gpsd-3.18.patch to build with latest gpsd

-------------------------------------------------------------------
Sat Aug  4 21:19:41 UTC 2018 - wk@ire.pw.edu.pl

- update to 3.13.0.1
  * N3xx: Fix UIO usage in Aurora BIST
  * N3xx: Fix EEPROM parsing (for upcoming hardware)
  * UHD: Fix install path for Python API
- patch uhd-fix-for-boost-1_67.patch to built with latest boost

-------------------------------------------------------------------
Tue Jul 24 21:14:51 UTC 2018 - wk@ire.pw.edu.pl

- update to 3.13.0.0
  * N3x0: Enable fast-reinit, fix power level issue, accept 0x01
    PID for AD9371, fix concurrency issues with Liberio
  * B200: Fix sc8/sc12 modes, fix frame-size related issues, fix
    tick rate coercion, fix issues on update of tick rate, fix
    EOB-not-seen issue
  * E310: Move to RFNoC architecture (this disables network mode!)
  * UBX: Fix phase synchronization for 184.32 MHz master clock rate
  * multi_usrp: Fix get_?x_info() API calls
  * UHD: Remove more Boost usage, fix some compiler warnings,
    default to all-channels subdev specs for X3x0 and N3x0, various
    LMX2592 fixes, bump minimum CMake to 2.8.2, fix logging dtor
    issues
  * RFNoC: Merge all existing RFNoC features into master
  * FPGA: Fix various testbenches, add batch testbench execution
    mode, improve uhd_image_builder and uhd_image_builder_gui, add
    all existing RFNoC features
  * Add Python API
  * MPM: Enable Rev2 EEPROM format, fix some rare issues when
    detecting Ethernet devices
  * CMake: Allow to override UHD_GIT_BRANCH, fix Python-finding
    logic, add ENABLE_N300 target

-------------------------------------------------------------------
Thu Jun  7 20:23:37 UTC 2018 - wk@ire.pw.edu.pl

- update to 3.12.0.0

-------------------------------------------------------------------
Thu May 31 12:30:05 UTC 2018 - wk@ire.pw.edu.pl

- changed dependency python-cheetah to python-Cheetah

-------------------------------------------------------------------
Sat May 26 22:29:43 UTC 2018 - wk@ire.pw.edu.pl

- update to 3.11.1.0
- sources are taken from github
- removed all patches

-------------------------------------------------------------------
Wed Jan 31 23:38:59 UTC 2018 - wk@ire.pw.edu.pl

- update to 3.10.3.0
- removed patch for boost-1.66 (applied upstream)

-------------------------------------------------------------------
Sat Jan 13 16:42:27 UTC 2018 - wk@ire.pw.edu.pl

- building on Tumbleweed now requires python3-Mako

-------------------------------------------------------------------
Sun Dec 31 10:53:55 UTC 2017 - wk@ire.pw.edu.pl

- fixed build with boost-1.66
  patch uhd-fix-for-boost-1_66.patch backported from git

-------------------------------------------------------------------
Tue Aug  1 20:38:05 UTC 2017 - wk@ire.pw.edu.pl

- update to 3.10.2.0

-------------------------------------------------------------------
Thu May  4 13:52:50 UTC 2017 - wk@ire.pw.edu.pl

- Force docutils to use python2 on Tumbleweed

-------------------------------------------------------------------
Fri Feb  3 16:14:09 UTC 2017 - jengelh@inai.de

- Directly invoke ldconfig and don't suppress output from groupadd.

-------------------------------------------------------------------
Thu Feb  2 15:13:46 UTC 2017 - adam.majer@suse.de

- use individual libboost-*-devel packages instead of boost-devel

-------------------------------------------------------------------
Tue Dec 13 13:06:09 UTC 2016 - victhor.foster@gmail.com

- Add fix-for-armv6l-armv7l-build-failure.patch, adds -mfpu=neon compiler flag to package
  Fixes build failure on armv6l and armv7l architectures

-------------------------------------------------------------------
Sat Sep  3 19:32:09 UTC 2016 - wk@ire.pw.edu.pl

- Update sources to version 3.9.5

-------------------------------------------------------------------
Sun Jul  3 12:54:44 UTC 2016 - opensuse.lietuviu.kalba@gmail.com

- %pre script requires /usr/sbin/groupadd from "shadow" package

-------------------------------------------------------------------
Sat May  7 22:38:01 UTC 2016 - wk@ire.pw.edu.pl

- Update sources to version 3.9.4

-------------------------------------------------------------------
Wed Mar 23 23:01:19 UTC 2016 - wk@ire.pw.edu.pl

- Update sources to version 3.9.3

-------------------------------------------------------------------
Thu Dec 31 10:22:49 UTC 2015 - wk@ire.pw.edu.pl

- Update sources to version 3.9.2
- Drop 0003-uhd-C-API-wrapper-fix-commit-30f87afcba71a07.patch:
  included upstream

-------------------------------------------------------------------
Sun Dec 27 22:45:13 UTC 2015 - mardnh@gmx.de

- Add patch for correctly installing the C-API header files
  * 0003-uhd-C-API-wrapper-fix-commit-30f87afcba71a07.patch

-------------------------------------------------------------------
Sat Sep 26 08:00:37 UTC 2015 - wk@ire.pw.edu.pl

- Update sources to version 3.9.1
- arm-neon.patch patch removed

-------------------------------------------------------------------
Thu Sep 10 21:30:21 UTC 2015 - wk@ire.pw.edu.pl

- Update sources to version 3.9.0

-------------------------------------------------------------------
Tue Aug 18 23:08:51 UTC 2015 - wk@ire.pw.edu.pl

- Update sources to version 3.8.5

-------------------------------------------------------------------
Wed Aug 12 12:34:58 UTC 2015 - schwab@suse.de

- arm-neon.patch: don't use 32-bit arm code on 64-bit arm

-------------------------------------------------------------------
Sat Jun 20 09:53:26 UTC 2015 - dmitry_r@opensuse.org

- Add _constraints to set required memory to 3Gb

-------------------------------------------------------------------
Sat May 16 07:07:10 UTC 2015 - wk@ire.pw.edu.pl

- Update sources to version 3.8.4

-------------------------------------------------------------------
Wed Feb 18 23:53:30 UTC 2015 - wk@ire.pw.edu.pl

- Update sources to version 3.8.2

-------------------------------------------------------------------
Thu Jan 29 21:28:34 UTC 2015 - wk@ire.pw.edu.pl

- Update to version 3.8.1
  * firmware images are from 3.8.2

-------------------------------------------------------------------
Thu Oct 23 19:51:56 UTC 2014 - wk@ire.pw.edu.pl

- Update to version 3.7.3
  * firmware images are from 3.7.2

-------------------------------------------------------------------
Mon Sep  1 22:22:58 UTC 2014 - wk@ire.pw.edu.pl

- Update to version 3.7.2
  * bugfix release

-------------------------------------------------------------------
Wed Aug 20 08:37:28 UTC 2014 - dmitry_r@opensuse.org

- Cleanup spec file
- Remove OBS source service
- Use %cmake macros
- Move udev rules to uhd-udev package according to shared library
  packaging policy
- Remove buildtime from documentation

-------------------------------------------------------------------
Wed Apr  2 21:17:08 UTC 2014 - wk@ire.pw.edu.pl

- Update to version 3.7.0

-------------------------------------------------------------------
Thu Jan 30 12:30:52 UTC 2014 - lnt-sysadmin@lists.lrz.de

- Changes to spec file: 
  * Use full path when calling groupadd

-------------------------------------------------------------------
Wed Jan 29 13:25:24 UTC 2014 - opensuse@dstoecker.de

- uhd-devel needs boost

-------------------------------------------------------------------
Sun Nov  3 04:58:02 UTC 2013 - lnt-sysadmin@lists.lrz.de

- Update to version 3.5.4
- Changes to spec file:
  * Update udev paths for openSUSE 13.1 and ensure udev rules are
    updated when package is installed / updated / uninstalled.
  * Add %check section (currently disabled due to failures in 13.1)
  * Find file dupes also in %_bindir

-------------------------------------------------------------------
Fri Apr 12 07:54:53 UTC 2013 - lnt-sysadmin@lists.lrz.de

- Update to version 3.5.2
- Added Ettus firmware images (version 3.5.2)
- Changes to spec file:
  * pass %optflags to cmake according to
    http://en.opensuse.org/openSUSE:Build_system_recipes
  * fixed search for duplicate files

-------------------------------------------------------------------
Tue Nov 7 2012 - wk@ire.pw.edu.pl
 
- updated to 3.5.0
- fixed some rpmlint warnings

-------------------------------------------------------------------
Mon Oct 23 2012 - wk@ire.pw.edu.pl

- install udev rule (from Fedora)

-------------------------------------------------------------------
Sat Oct 21 2012 - wk@ire.pw.edu.pl

- updated to 3.4.3

-------------------------------------------------------------------
Fri Jun 15 2012 - surligas@csd.uoc.gr

- packaged libuhd version 3.4.2

Places

File uhd.changes of Package uhd3_15 (Revision 35e388cf53f6b94cd0fdc6f058e17583)

Places