File lsyncd.changes of Package lsyncd
-------------------------------------------------------------------
Mon Mar 11 06:55:44 UTC 2024 - seife+obs@b1-systems.com
- fix tarball to match the source URL
-------------------------------------------------------------------
Tue Mar 5 14:19:32 UTC 2024 - seife+obs@b1-systems.com
- update to version 2.3.1 (2022-11-17):
* multiple bugfixes, style fixes
* add nix flake support
* add support for tunnel commands
* add support for batchSizeLimit
* add -onepass option
* add crontab support
* support relative executable paths
- remove obsoleted patches lsyncd-lua.patch, lsyncd-man.patch
- add "After=remote-fs.target" to lsyncd.service to avoid syncing
unmounted NFS shares
-------------------------------------------------------------------
Fri Mar 1 11:15:40 UTC 2024 - pgajdos@suse.com
- Use %autosetup macro. Allows to eliminate the usage of deprecated
%patchN
-------------------------------------------------------------------
Wed Oct 6 06:17:08 UTC 2021 - Johannes Segitz <jsegitz@suse.com>
- Added hardening to systemd service(s) (bsc#1181400). Modified:
* lsyncd.service
-------------------------------------------------------------------
Sun Mar 7 07:41:20 UTC 2021 - Carsten Ziepke <kieltux@gmail.com>
- Use %%cmake macros
-------------------------------------------------------------------
Sun Mar 7 06:35:23 UTC 2021 - Carsten Ziepke <kieltux@gmail.com>
- Rebase lsyncd-lua.patch and add fix for implicit declaration of
function lua_objlen - renamed to lua_rawlen in 5.2
- Run spec-cleaner
- Remove insserv configuration and lsyncd-init.d
-------------------------------------------------------------------
Sun Jul 29 11:21:00 UTC 2018 - jengelh@inai.de
- Replace %__-type macro indirections. Use %_smp_mflags for
parallel build.
-------------------------------------------------------------------
Thu Apr 26 11:29:18 UTC 2018 - ecsos@opensuse.org
- update to 2.2.3
- enhaencement: supporting includes with new filter and filterFrom
options
- change: needing now at least Lua 5.2 (Lua 5.1 no longer
supported, Lua5.3 supported)
- change: if the target/targetdir ends with a ':' do not append
a trailing '/' to it, since that would change it from homedir
to rootdir!
- add: example for Amazon S3 Bucket (Daniel Miranda)
- fix: setting stdout/stderr to linebuffer mode.
- fix: Lua5.3 compatiblity, using load() instead of loadstring()
- fix: cmake lua detection, will resort to "lua" and "luac"
binaries only if more specific suffixes (e.g. luac5.3) are not
available
- fix: test suit, Lua5.3 compatibility (table.unpack)
- changes from 2.2.2
- fix: checkgauge 'insist'
- fix: no partial path exlusion tests
- fix: write pid of forked process in pidfile
- fix: crash on not reachable target
- workaround: changed back to filter style rsync calling until
https://bugzilla.samba.org/show_bug.cgi?id=12569 is fixed and
released.
- changes from 2.2.1
- enhancement: now always using filter lists with rysnc instead
of include/exclude lists taking advantage of the new
--delete-missing-args parameter to delete files on target.
>>> Thus Lsyncd 2.2.1 needs rsync >= 3.1.0
- change: added "tests" make target to run all the tests.
- fix: crash due to typo in changed ^path, ^pathdir, ^pathname
- changes from 2.2.0
- enhancement: add rsync options:
"append",
"append_verify",
"backup",
"backup_dir",
"chmod",
"chown",
"copy_dirlinks",
"existing",
"groupmap",
"omit_dir_times",
"omit_link_times",
"suffix,"
"usermap",
- enhancement: settings{ } now checks for unknown entries and
errors if so.
- change: Level3 scripts ^path,^pathdir and ^pathname now don't
start with a slash.
- change: Lsyncd now writes a startup log message before
daemonizing does in case logging fails, it is recognized before
it cannot message anything about it, since it deamonized
- change: compatible with Lua5.3 (along with 5.1 and 5.2)
- change: _verbatim forced for 'exitcodes' entry.
- change: manpage is not rebuild by default. it is provided
precompiled.
- change: faulty/deprecated config files that use
settings = { ... }, with equal sign are no longer worked
around.
- change: default.direct now calls copy with -p
- fix: potential race conditions: default.rsyncssh will now
channel deletes also through rsync and treats moves as
blocking events.
- fix: ']' is not escaped for rsync rules, since rsync only
applies doesn't applie pattern matching if no other pattern
chars are found.
- fix: Shell injection hole close for default.direct on mv
commands.
- fix: Crash of default-direct when source doesn't exit
- fix: fixed faulty event replacement, a race condition noticed
by extensive default.rsyncssh testing changed Delays were not
reflected in Events
- changes from 2.1.6
- enhancement: Lsyncd now locks its pidfile
- enhancement: added ssh.identifyFile and ssh.options options
- enhancement: added rsync inplace option
- fix: ignore blank lines and rsync commenits in exclude files
- fix: don't tread exclude lines with embedded "+" chars as
inclusions
- fix: crash when debugging inotify
- fix: fixed Finished/Retrying error messages being swapped around
- fix: properly encapsulate filenames on ssh mv commands to avoid
shell command injections.
- fix: postcmd example
- change: closes also on INT signals
- change: now removes its pidfile on INT and TERM signals
- change: changed build system from autotools to cmake
- change url and source to new location
- remove lsyncd-lua-5_3.patch, because no more need
- aad patch lsyncd-lua.patch to find libraries
- add patch lsyncd-man.patch to put manpages to correct location
- fix all rpmlint warnings
- Replace %__-type macro indirections.
- Use %_smp_mflags for parallel build.
-------------------------------------------------------------------
Tue Apr 17 13:48:00 UTC 2018 - mikhail.kasimov@gmail.com
- Updated path to lsyncd.conf for lsyncd.service and lsyncd.sysconfig
(boo#975118)
-------------------------------------------------------------------
Thu Nov 23 13:51:52 UTC 2017 - rbrown@suse.com
- Replace references to /var/adm/fillup-templates with new
%_fillupdir macro (boo#1069468)
-------------------------------------------------------------------
Wed Mar 15 16:37:02 UTC 2017 - dimstar@opensuse.org
- Explicitly package files installed by make install into _docdir:
rpm 4.13 no longer implicitly packages those files.
-------------------------------------------------------------------
Thu Jul 30 09:58:39 UTC 2015 - dimstar@opensuse.org
- Add lsyncd-lua-5_3.patch: Fix build with LUA 5.3.
-------------------------------------------------------------------
Fri Jun 5 22:32:26 UTC 2015 - p.drouand@gmail.com
- Remove scriptlets pre/post on systems with sysvinit support.
-------------------------------------------------------------------
Sun Mar 1 13:59:17 UTC 2015 - p.drouand@gmail.com
- Update to version 2.1.5
* enhancement: Added rsync options: bwlimit, timeout
* fix: Specifying ssh port no longer overwrites the last rsync option
* fix: rsync option password_file is now accepted
* fix: onAttrib is accepted again
* fix: -log Exec now prints now fully all arguments
* fix: configure script lua detection now includes math lib to workaround
wrongly created "needs COMPAT_ALL" messages.
* fix: repaired variable replacement for layer 3 scripts
* fix: config.delay is now checked to a number >= 0
* change: a2x is no longer checked by configure script. should not be
needed when building from tarball
- Use download Url as source
- Add sysconfig config script support for init scripts
- Fix sysvinit script to be able to use sysconfig options
- Add systemd support for openSUSE > 13.2
- Add required macros to support correctly sysvinit script
- Remove redundant %clean section
-------------------------------------------------------------------
Wed Feb 6 11:33:44 UTC 2013 - e.istomin@edss.ee
- update to 2.1.4
- remove lua 5.2 patch (https://github.com/axkibe/lsyncd/pull/148)
-------------------------------------------------------------------
Tue Oct 9 01:45:43 UTC 2012 - crrodriguez@opensuse.org
- Build against LUA 5.2
-------------------------------------------------------------------
Sun Feb 26 16:02:41 CET 2012 - dmueller@suse.de
- fix build in factory (build against lua 5.1)
-------------------------------------------------------------------
Mon Nov 28 09:58:02 UTC 2011 - eugene.istomin@edss.ee
- update to 2.0.5
* fix: Lsyncd will now terminate if it inotify watching exceeds
its preset limit.
* fix: rsync error exit code 12 now results in retries.
* fix: Lsyncd 2.0.5 should now compile better on a bit elder
GNU/Linux versions.
* fix: examples are now installed in the configured document directory.
* fix: partial transfers during startup are considered ok. Lsyncd
will rework the specified files anyway.
* change: Layer 1 interface init() now receives an "Init" event
instead of an inlet.
* change: builtin Lua code is now loaded via a c-array.Now more
portable and correct memory flags are set.
* change: Lsyncd will now bail on unknown error codes.
* enhancement: settings.maxProcesses can now be set as a global limit of childprocesses
* enhancement: Lsyncd will refuse to start when any startup rsync
does not work cleanly and returns "again" unless settings.insist or
--insist is specified, then Lsyncd will keep retrying until it works.
* enhancement: option "rsyncBinary" determines which rsync Lsyncd calls.
Default is "/usr/bin/rsync"
* enhancement: fsevents ("inotify for OSX") fixed for Snowleopard.
and is available to configure by default.
* enhancement: settings.inotifyMode: the actualy Modification event
Lsyncd reacts to can now be configured. Default is to react on
file closing in write mode.
* enhancement: readdir(path) is available to userscripts, reads the contents
of a directory.
-------------------------------------------------------------------
Mon Mar 28 11:29:46 UTC 2011 - dmacvicar@suse.de
- update to 2.0.4
* enhancement: new setting options logident, logfacility
* fix: moving filenames with spaces through ssh
* fix: excludes containing chars % $ ( ) . [ ] + -
* fix: various typos
* change: api, settings.statusInterval instead of
settings.statusIntervall
-------------------------------------------------------------------
Tue Mar 8 09:00:01 UTC 2011 - dmacvicar@suse.de
- update to 2.0.3
* enhancement: new default target --direct using /bin/ binaries
to keep to local dirs in sync (and by default
not preserving ownership)
* example: added a new example how to remotely execute a command
after each rsync operations
* fix: possible crash with long rsyncOps table exceeding lua stack.
* fix: excludes now properly match relative and absolute paths
* fix: call to nil function when manually adding blanket delays
* fix: on ReiserFS not delivering proper dir stats and when
encountering a symlink, aquire the node stat for the symlink
instead from the linked node.
* change: leave lua apichecking enabled by default.
-------------------------------------------------------------------
Fri Jan 21 07:47:38 UTC 2011 - dmacvicar@suse.de
- update to 2.0.2
* fix: exclude rules not terminated with '/' now match a file or dir
named exactly the same not starting with.
* fix: pass exclude rules to the startup sync
* fix: when matching exclusion to not add inotify use same partial path
than on syncs
* fix: properly close pipes that needed more than one write.
- 2.0.1 changes
* most important fix: The garbage collector in 2.0.0 was able to
remove event lists just at the wrong moment so an "agent unknown"
error was raised.
* fixed: The pid in the pidfile should be now the pid after the deamon
fork() and not the pid initiators pid.
* improved: You can now specify multiple command-line options in
rsyncOps by using a table. eg. rsyncOps = {"--lts", "--safe-links"}
-------------------------------------------------------------------
Thu Dec 2 13:18:29 UTC 2010 - dmacvicar@suse.de
- update to 2.0.0 final
-------------------------------------------------------------------
Fri Nov 26 15:06:35 UTC 2010 - dmacvicar@suse.de
- update to 2.0beta3
