openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File hostapd.spec of Package hostapd (Revision 6b8b31f436ac7ad83ab9f6861da38ad4)

Currently displaying revision 6b8b31f436ac7ad83ab9f6861da38ad4 , Show latest

#
# spec file for package hostapd (Version 0.5.10)
#
# Copyright (c) 2008 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via http://bugs.opensuse.org/
#

# norootforbuild

Name:           hostapd
BuildRequires:  openssl-devel
Summary:        Turns Your WLAN Card into a WPA capable Access Point
Version:        0.5.10
Release:        1
Group:          Hardware/Wifi
License:        BSD 3-Clause; GPL v2 or later
BuildRoot:      %{_tmppath}/%{name}-%{version}-build
#Provides:
#Requires:    
#Conflicts:   
Url:            http://hostap.epitest.fi/
AutoReqProv:    on
Source:         hostapd-%{version}.tar.bz2
Patch:          hostapd.dif

%description
hostapd is a user space daemon for access point and authentication
servers. It implements IEEE 802.11 access point management, IEEE
802.1X/WPA/WPA2/EAP Authenticators, RADIUS client, EAP server, and
RADIUS authentication server. Currently, hostapd supports HostAP,
madwifi, and prism54 drivers. It also supports wired IEEE 802.1X
authentication via any ethernet driver.

Authors:
--------
    Jouni Malinen <jkmaline@cc.hut.fi>

%prep
%setup -n hostapd-%{version}
%patch -p1

%build
CFLAGS="$RPM_OPT_FLAGS" make  %{?jobs:-j%jobs}

%install
mkdir -p %{buildroot}/%{_sbindir}
mkdir %{buildroot}/etc
install -m 755 hostapd %{buildroot}/%{_sbindir}
install -m 755 hostapd_cli %{buildroot}/%{_sbindir}
install -m 644 hostapd.conf %{buildroot}/etc
install -m 644 hostapd.accept %{buildroot}/etc
install -m 644 hostapd.deny %{buildroot}/etc
install -m 644 hostapd.eap_user %{buildroot}/etc
install -m 644 hostapd.radius_clients %{buildroot}/etc
install -m 644 hostapd.sim_db %{buildroot}/etc
install -m 644 hostapd.wpa_psk %{buildroot}/etc

%clean
rm -rf $RPM_BUILD_ROOT

%files
%defattr(-,root,root)
%config(noreplace) /etc/*
%{_sbindir}/*
%doc ChangeLog COPYING README madwifi.conf wired.conf

%changelog
* Wed Sep 24 2008 ro@suse.de
- drop buildreq for madwifi (dropped package)
* Tue Sep 23 2008 ro@suse.de
- updae to version 0.5.10, changes:
  * fixed EAP-SIM and EAP-AKA message parser to validate attribute
  lengths properly to avoid potential crash caused by invalid messages
  * fixed Reassociation Response callback processing when using internal
  MLME (driver_{hostap,devicescape,test}.c)
  * fixed EAP-SIM/AKA realm processing to allow decorated usernames to
  be used
  * added a workaround for EAP-SIM/AKA peers that include incorrect null
  termination in the username
  * fixed EAP-SIM Start response processing for fast reauthentication
  case
  * copy optional Proxy-State attributes into RADIUS response when acting
  as a RADIUS authentication server
- update to version 0.5.9, changes:
  * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest
  draft (draft-ietf-emu-eap-gpsk-07.txt)
  * fixed debugging code not to use potentially unaligned read to fetch
  IPv4 addresses
* Mon Jan 21 2008 cstender@suse.de
- fixed madwifi include dir (b.n.c #350982)
* Mon Jul 30 2007 jg@suse.de
- update to version 0.5.8, changes:
  * updated driver_devicescape.c to build with the current
  wireless-dev.git tree and net/d80211 changes
  * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest
  draft (draft-ietf-emu-eap-gpsk-03.txt)
  * fixed EAP-MSCHAPv2 server to use a space between S and M parameters
  in Success Request [Bug 203]
  * added support for sending EAP-AKA Notifications in error cases
  * RADIUS server: added support for processing duplicate messages
  (retransmissions from RADIUS client) by replying with the previous
  reply
* Wed Mar 14 2007 jg@suse.de
- split off hostapd in its own package
- update to version 0.5.7, changes (shortened):
  * fixed EAP-PSK bit ordering of the Flags field
  * fixed configuration reloading (SIGHUP) to re-initialize WPA PSKs
  * fixed IPv6 connection to RADIUS accounting server
  * added support for configuring and controlling multiple BSSes per
  radio interface (bss=<ifname> in hostapd.conf)
  * added support for dynamic VLAN configuration
  * driver_madwifi: fixed configuration of unencrypted modes
  * added preliminary implementation of IEEE 802.11w/D1.0 (management
  frame protection)
  * fixed session timeout processing with drivers that do not use
  ieee802_11.c (e.g., madwifi)
  * added 'hostapd_cli new_sta <addr>' command for adding a new STA
  into hostapd
  * fixed hostapd to add PMKID KDE into 4-Way Handshake Message 1
  when using WPA2 even if PMKSA caching is not used
  * added -P<pid file> argument for hostapd to write the current
  process id into a file
  * added support for RADIUS Authentication Server MIB (RFC 2619)
  * added support for EAP Generalized Pre-Shared Key
  * fixed a segmentation fault when RSN pre-authentication was
  completed successfully
  * added support for EAP-SAKE
  * driver_madwifi: added support for getting station RSN IE from
  madwifi-ng svn r1453 and newer
  * fixed WPA message 3/4 not to encrypt Key Data field (WPA IE)
  * added ap_max_inactivity configuration parameter
  * added support for EAP expanded type (vendor specific EAP methods)
  * added support for using EAP-SIM pseudonyms and fast re-authentication
  * added support for EAP-AKA in the integrated EAP authenticator
* Mon Sep 18 2006 jg@suse.de
- hostap-utils: Fixed usage of uninitialised variable (bug 184410)
- hostapd: Update to version 0.4.9, changes:
  * added a new configuration option, eapol_version, that can be
  used to set EAPOL version to 1 (default is 2) to work around
  broken client implementations that drop EAPOL frames which use
  version number 2 [Bug 89]
  * fixed EAP-MSCHAPv2 message length validation
  * fixed stdarg use in hostapd_logger(): if both stdout and syslog
  logging was enabled, hostapd could trigger a segmentation fault
  in vsyslog on some CPU -- C library combinations
* Sun Feb 05 2006 ro@suse.de
- use madwifi-devel in BuildRequires
* Sun Feb 05 2006 aj@suse.de
- Remove BuildRequires on km_wlan.
* Wed Jan 25 2006 mls@suse.de
- converted neededforbuild to BuildRequires
* Mon Nov 21 2005 jg@suse.de
- hostapd: update to 0.4.7, changes:
  * driver_wired: fixed EAPOL sending to optionally use PAE group
  address as the destination instead of supplicant MAC address
  * driver_madwifi: configure driver to use TKIP countermeasures in
  order to get correct behavior
  * driver_madwifi: added support for madwifi-ng
- hostapd: remove obsolete madwifi patch
- hostapd: updated config file
- hostap-utils: update to 0.4.7 (no changes)
- use %%{jobs}
* Tue Nov 08 2005 jg@suse.de
- do not build as root
* Fri Nov 04 2005 jg@suse.de
- hostapd, update to 0.4.6, changes:
  * added support for replacing user identity from EAP with RADIUS
  User-Name attribute from Access-Accept message, if that is included,
  for the RADIUS accounting messages (e.g., for EAP-PEAP/TTLS to get
  tunneled identity into accounting messages when the RADIUS server
  does not support better way of doing this with Class attribute)
  * driver_madwifi: fixed EAPOL packet receive for configuration where
  ath# is part of a bridge interface
  * added a configuration file and log analyzer script for logwatch
  * fixed EAPOL state machine step function to process all state
  transitions before processing new events; this resolves a race
  condition in which EAPOL-Start message could trigger hostapd to send
  two EAP-Response/Identity frames to the authentication server
- hostapd: added support for madwifi-ng
- removed hostap-driver, is part of the kernel now
* Thu Oct 13 2005 jg@suse.de
- hostapd: update to 0.4.5, changes (shortened):
  * added client CA list to the TLS certificate request in order to
  make it easier for the client to select which certificate to use
  * added experimental support for EAP-PSK
  * added support for WE-19 (hostap, madwifi)
  * fixed PMKSA caching to copy User-Name and Class attributes so
  that RADIUS accounting gets correct information
  * start RADIUS accounting only after successful completion of WPA
  4-Way Handshake if WPA-PSK is used
  * fixed PMKSA caching for the case where
  * EAP-PAX is now registered as EAP type 46
  * fixed EAP-PAX MAC calculation
  * fixed EAP-PAX CK and ICK key derivation
- hostap-driver: update to 0.4.5, changes:
  * added support for WE-19
- hostap-utils: update to 0.4.0 (no real changes)
* Thu Sep 08 2005 jg@suse.de
- fixed file permissions
* Mon Aug 22 2005 jg@suse.de
- hostap-driver: update to 0.4.4, changes:
  * added support for pcmcia changes in Linux 2.6.13
  * added support for creating sysfs device files (Linux 2.6.x)
  * fixed power save processing for PS-Poll frames with PwrMgmt flag
  set (this was causing "wifi0: invalid skb->cb magic" errors)
  * fixed linking both hostap_cs and hostap_pci to kernel
  * filter out sequential disconnect events to make race condition with
  received EAPOL frames less likely to happen (this improves
  authentication success rate with some APs that send EAPOL frames
  very quickly after the (re)association response)
  * added support for setting channel mask for scan requests
* Mon Aug 08 2005 ro@suse.de
- fix build with current wireless drivers
* Mon Jul 11 2005 jg@suse.de
- hostapd: update to 0.3.9, changes:
  * fixed a bug which caused some RSN pre-authentication cases to
  use freed memory and potentially crash hostapd
  * fixed private key loading for cases where passphrase is not set
  * fixed WPA2 to add PMKSA cache entry when using integrated EAP
  authenticator
  * driver_madwifi: fixed pairwise key removal to allow WPA reauth
  without disassociation
  * fixed RADIUS attribute Class processing to only use
  Access-Accept packets to update Class; previously, other RADIUS
  authentication packets could have cleared Class attribute
  * fixed PMKSA caching (EAP authentication was not skipped correctly
  with the new state machine changes from IEEE 802.1X draft)
- hostap-driver: update to 0.3.9, changes:
  * fixed background scans (iwlist wlan0 scan) not to break data
  connection when in host_roaming 2 mode
  * fixed beacon frame when moving from monitor mode to master mode
* Wed Jun 08 2005 meissner@suse.de
- adjust hostapd/Makefile to be able to correctly
  get passed RPM_OPT_FLAGS.
* Wed Jun 08 2005 meissner@suse.de
- Use RPM_OPT_FLAGS.
* Fri Mar 11 2005 jg@suse.de
- hostap-driver:
  * create sysfs links for ethernet device, not IEEE80211 device
  * disabled sysfs links for hostap_cs, as it breaks association
* Thu Feb 24 2005 jg@suse.de
- hostap-driver: fixed sysfs support
* Mon Feb 14 2005 jg@suse.de
- hostapd, hostap-utils, hostap-driver: update to 0.3.7 final
  (no real changes, just version rename)
* Mon Feb 07 2005 jg@suse.de
- disabled support for madwifi on non x86(-64) platforms
* Mon Feb 07 2005 jg@suse.de
- hostapd: update to version 0.3.7-pre, changes (shortened):
  * added support for configuring a forced PEAP version based on
  the Phase 1 identity
  * fixed PEAPv1 to use tunneled EAP-Success/Failure instead of
  EAP-TLV to terminate authentication
  * driver_madwifi: filter wireless events based on ifindex to
  allow more than one network interface to be used
  * added support for configuring multiple allowed EAP types for
  Phase 2 authentication (EAP-PEAP, EAP-TTLS)
  * added support for EAP-PEAP in the integrated EAP authenticator
  * added support for EAP-GTC in the integrated EAP authenticator
  * added support for configuring list of EAP methods for Phase 1
  so that the integrated EAP authenticator can, e.g., use the
  wildcard entry for EAP-TLS and EAP-PEAP
  * added support for EAP-TTLS in the integrated EAP authenticator
  * added support for EAP-SIM in the integrated EAP authenticator
  * added support for using hostapd as a RADIUS authentication
  server with the integrated EAP authenticator taking care of
  EAP authentication
  * driver_madwifi: fixed group key setup and added get_ssid method
  * added support for EAP-MSCHAPv2 in the integrated EAP
  authenticator
  * added support for integrated EAP-TLS authentication
  * added support for reading PKCS#12 (PFX) files (as a replacement
  for PEM/DER) to get certificate and private key (CONFIG_PKCS12)
  * added support for Acct-{Input,Output}-Gigawords
  * added support for Event-Timestamp (in RADIUS Accounting-Requests)
  * added support for RADIUS Authentication Client MIB (RFC2618)
  * added support for RADIUS Accounting Client MIB (RFC2620)
  * made EAP re-authentication period configurable
  * fixed EAPOL reauthentication to trigger WPA/WPA2 reauthentication
  * added support for multiple WPA pre-shared keys
  * added support for multiple driver interfaces to allow hostapd
  to be used with other drivers
  * added wired authenticator driver interface
  * added madwifi driver interface
  * fixed RADIUS reconnection after an error in sending interim
  accounting packets
  * added hostapd control interface for external programs
  * finished update from IEEE 802.1X-2001 to IEEE 802.1X-REV
  (now d11)
  * added support for strict GTK rekeying
  * added Prism54 driver interface
  * dual-licensed hostapd (GPLv2 and BSD licenses)
  * added integrated EAP authenticator that can be used instead of
  external RADIUS authentication server
- hostap-driver: update to version 0.3.7-pre, changes:
  * improved suspend operation: disable firmware (hostap_cs) and
  generate disconnect event to trigger wpa_supplicant to
  reassociate immediately after resume
  * added new ioctl command for hostapd to clear station specific
  accounting data when starting a new accounting session
  * added support for the special initialization needed for the
  wireless part of multi-function SanDisk ConnectPlus CF cards
  (manfid 0xd601, 0x0101)
  * fixed card enabling after firmware download in case any of the
  netdevs were up when the download was started
  * added support for Linux wireless extension v17
- hostap-utils: update to version 0.3.7-pre (no changes)
- added all example configuration files
* Thu Jan 13 2005 jg@suse.de
- hostapd: update to version 0.2.6, changes:
  * fixed RADIUS accounting to generate a new session id for cases
  where a station reassociates without first being complete
  deauthenticated
  * fixed STA disassociation handler to mark next timeout state to
  deauthenticate the station, i.e., skip long wait for inactivity
  poll and extra disassociation, if the STA disassociates without
  deauthenticating
  * removed 'daemonize' configuration file option since it has not
  really been used at all for more than year
- hostap-utils: update to version 0.2.6, changes:
  * split_combined_hex: updated to use head/tail -n argument
- hostap-driver: update to version 0.2.6, changes:
  * added support for changed PCI API in Linux 2.6.10-rc1 and newer
* Tue Nov 02 2004 jg@suse.de
- hostapd: update to version 0.2.5, changes:
  * fixed EAPOL reauthentication to trigger WPA/WPA2
  reauthentication
  * fixed EAPOL state machine to stop if STA is removed during
  eapol_sm_step(); this fixes at least one segfault triggering
  bug with IEEE 802.11i pre-authentication
  * fixed an alignment issue that could cause SHA-1 to fail on some
  platforms (e.g., Intel ixp425 with a compiler that does not
  32-bit align variables)
  * fixed RADIUS reconnection after an error in sending interim
  accounting packets
- hostap-driver: update to version 0.2.5, changes:
  * fixed card enabling after firmware download in case any of the
  netdevs were up when the download was started
  * fixed netif_carrier_on/off() calls to leave carrier on for
  Master mode; previously this may have been left off in some
  cases which could prevent packet bridging with new kernel
  versions
- hostap-driver: enabled support for non-volatile firmware download
* Fri Oct 01 2004 jg@suse.de
- fixed sysfs device/driver links (bug 46633)
* Mon Aug 09 2004 jg@suse.de
- fixed filelist
* Fri Aug 06 2004 jg@suse.de
- do not install /etc/pcmcia/hostap_cs.conf.example anymore
* Thu Jul 29 2004 jg@suse.de
- update hostapd to 0.2.4:
  * fixed some accounting cases where Accounting-Start was sent
  when IEEE 802.1X port was being deauthorized
  * modified RADIUS client to re-connect the socket in case of
  certain error codes that are generated when a network
  interface state is changes (e.g., when IP address changes or
  the interface is set UP)
  * fixed couple of cases where EAPOL state for a station was freed
  twice causing a segfault for hostapd
  * fixed couple of bugs in processing WPA deauthentication
  * fixed WPA/WPA2 group rekeying to use key index correctly (GN/GM)
  * fixed group rekeying to send zero TSC in EAPOL-Key messages to
  fix cases where STAs dropped multicast frames as replay attacks
  * added support for copying RADIUS Attribute 'Class' from
  authentication messages into accounting messages
  * send canned EAP failure if RADIUS server sends Access-Reject
  without EAP message (previously, Supplicant was not notified
  in this case)
  * fixed mixed WPA-PSK and WPA-EAP mode to work with WPA-PSK
- update hostap-utils to 0.2.4 (no changes)
- update hostap-driver to 0.2.4:
  * fixed wlan#/wifi# interface packet counters (both are supposed
  to see data packets once; wlan# was counting TX twice and wifi#
  did not count TX or RX at all for most cases)
  * fixed compilation with PRISM2_NO_STATION_MODES defined
  * fixed MAC address changing to update address for wifi# interface
  (without this, at least Master mode did not work correctly when
  MAC address was changed for wlan#)
  * fixed inner-BSS bridge (ap_bridge_packets=1) not to bridge
  packets to unauthorized ports when IEEE 802.1X/WPA is used
  * merged CryptoAPI versions of WEP/TKIP/CCMP from the wireless-2.6
  BitKeeper tree (not used by default, can be enabled by defining
  HOSTAP_USE_CRYPTO_API)
  * fixed a buffer overflow in TKIP encryption (hostap_crypt_tkip
  module) on big endian hosts
* Mon May 17 2004 jg@suse.de
- update hostapd to 0.2.1 (shortened):
  * added WPA and IEEE 802.11i/RSN (WPA2) Authenticator
  functionality
  * added support for Acct-Interim-Interval
  * added new hostapd.conf variable, nas_identifier, that can be
  used to add an optional RADIUS Attribute, NAS-Identifier, into
  authentication and accounting messages
  * added support for Accounting-On and Accounting-Off messages
- update hostap-utils to 0.2.1:
  * hostap_rid: fixed handling of failed RID reads
  * fixed prism2_srec not to allow combination of volatile and
  non-volatile firmware images (they will corrupt the card flash)
  * added support for loading PRI firmware for cards without PRI
  * fixed volatile download of combined primary and secondary
  firmware to start running the secondary firmware
  * added support for dumping PDA in text format and overriding PDA
  with text and binary files (prism2_srec options -D, -P, and -O)
- update hostap-driver to 0.2.1 (shortened):
  * allow hostapd to send encrypted frames using wlan#ap interface
  * added driver support for hostapd WPA Authenticator
  * fixed TKIP get sequence number
  * clear IFF_RUNNING and generate linkwatch events based on
  association status in Managed mode
  * added alternative TKIP implementation which uses Michael MIC
  implementation in CryptoAPI instead of Host AP specific
  implementation
  * added support for RSN (IEEE 802.11i/WPA2)
  * dropped support for Linux 2.2.x and old Linux 2.4.x kernels
  * fixed hostap_cs unregistration when PC Card is removed while
  Host AP interfaces are still up
  * restructured Linux net device use to be more like IEEE 802.1q
  VLAN
  * disable wlan hardware when radio netdev (wifi#) is down
  * fixed Shared Key authentication when using host_decrypt and
  kernel driver based IEEE 802.11 management
  * added crypto hooks for full MSDU encrypt/decrypt
  * fixed iwspy support with Linux wireless ext v16
  * fixed IEEE 802.11 defragmentation when using host-based WEP
  decryption and bridging packets between two associated STAs
  * added driver support for WPA Authenticator/Supplicant
  * added minimal support for ethtool
- fixed bug in hostap-driver Makefile which prevented hostap_cs.ko
  from being built
* Sat Apr 03 2004 jg@suse.de
- fixed sysfs support in hostap driver (bug #37278)
* Tue Mar 30 2004 jg@suse.de
- skipping build for UM kernels (bug #37448)
- skipping build of hostap_cs in case PCMCIA is disabled in the
  kernel config (also bug #37448)
* Tue Mar 02 2004 jg@suse.de
- typo fix in makefile
* Sun Feb 29 2004 jg@suse.de
- update to hostapd-0.1.3, changes:
  * fixed event loop to call signal handlers only after returning from
  the real signal handler
  * reset sta->timeout_next after successful association to make sure
  that the previously registered inactivity timer will not remove the
  STA immediately (e.g., if STA deauthenticates and re-associates
  before the timer is triggered).
- update to hostap-driver-0.1.3, changes:
  * fixed IEEE 802.11 defragmentation when using host-based WEP
  decryption and bridging packets between two associated STAs
  (this caused a kernel crash in dev_queue_xmit())
  * reconfigure fragmentation threshold after Port0 enable to work around
  issues with some STA firmware versions forgetting the configured
  value
  * restore retry limit after card reset
  * update STA RX statistics also in Repeater mode
  * hostap_cs: fixed CS reset when the netdev is down: need to reset
  hardware even in this case to make resume from suspend mode work
  correctly
  * fixed error reporting from Genesis mode download
  * changed README to use 'make' instead of 'make pccard/pci/plx' when
  building the driver
  * replaced CardServices() calls with calls to matching pcmcia_*()
  functions (required for Linux 2.6.2 and newer)
  * fixed module reference counting of hostap_crypt_wep module for
  Linux 2.6.x (i.e., prevent it from be unloaded if it is still used)
- update to hostap-utils-0.1.3, changes:
  * prism2_srec: ignore PDR 0x0413 if it is not used (this allows some
  of the newer STA firmware 1.8.x versions to be downloaded)
  * prism2_srec: fixed combined RAM download of PRI and STA firmwares
  to use correct start address
- added driver race condition fix from hostap CVS
- rewrote driver Makefile
* Mon Jan 26 2004 jg@suse.de
- removed kernel-source from neededforbuild
* Fri Jan 09 2004 jg@suse.de
- driver update to version 0.1.2, from ChangeLog
  * fixed RTS and Fragmentation thresholds after hw reset
  * fixed Managed/Ad-hoc mode authentication with Open System
  algorithm when using old (e.g., version 0.6.2) STA firmware
  * fixed iwspy support with Linux wireless ext v16
  * fixed WDS interface selection to not select non-WDS interface
  * fixed wlan#wds#, wlan#ap, and wlan#sta netdevice unregistration
  * added PCI ID for Prism3 mini-PCI [hostap_pci]
  * fixed yield() backward compatibility code for Linux 2.4.0-18
  * added support for 32-bit CommTallies (if STA f/w >= 0.8.2)
  * update counters used for /proc/net/hostap/wlan#/stats periodically
  * fixed CommTallies handling on big endian platforms
  * added support for Primary-only mode
  * fixed failure handling in PCI probe not to crash kernel [hostap_pci]
  * merged hostap_crypt module into hostap module
  * fixed inactivity polling of stations that are in power saving mode
- utils update to version 0.1.2, from ChangeLog
  * fixed prism2_srec not to allow combination of volatile and
  non-volatile firmware images (they will corrupt the card flash)
  * reduced verbosity of prism2_srec
  * added support for volatile download of Primary firmware using
  Genesis mode (this is available only for hfa3842; hfa3841, i.e., old
  Prism2 cards, require hardware changes for similar function)
  ('-g' command line option in prism2_srec)
  * added support for merging two srec file (Primary and Secondary(STA)
  firmware) into one non-volatile (flash) download
- hostapd update to version 0.1.0
* Mon Sep 08 2003 agruen@suse.de
- km_hostap-HZ.diff: Adapt to dynamic-hz kernel patch.
* Mon Jul 28 2003 jg@suse.de
- update to version 0.0.4, from ChangeLog (shortened)
  * moved non-hardware specific RX code from hostap_hw.c into a new file,
  hostap_80211_rx.c and removed Prism2 RX descriptor dependency from
  hostap_ap.c
  * fixed number of compilation issues (RH9 kernel, *.mod files to local
  directory, 2.4.x compilation with CONFIG_MODVERSIONS, external
  pcmcia-cs)
  * removed extra tasklet that was used with TX callback handler
  * update basic rate set automaticallyt when changing supported rate set
  * fixed compilation without Linux Wireless Extensions
  * use less aggressive transmit rate decreasing algorithm
  * fixed inactivity expiration of stations using power saving mode
  * fixed sending of IEEE 802.1X frames to buffer them if STA is in power
  saving mode
  * removed backward compatibility code for Linux Wireless Extensions
  versions older than ver 9
  * added module parameter 'dev_template' for setting the device name
  template (default: 'wlan%%d'); this is for hostap_{cs,pci,plx}.o
  * changed monitor mode to use pseudo-IBSS mode instead of Host AP mode
  to avoid sending out Beacon and ProbeResp frames
  * fixed enh_sec setting (hide SSID) to reset Port0 so that the changes
  to the beacon are taken into use immediately
  * added support for selection which authentication algorithm to use
  in station mode
  * added support for manual scan and roaming mode (managed/ad-hoc);
  * process beacon frames in kernel driver even when hostapd is used
  * removed TX power controlling (iwconfig txpower)
* Tue Jun 17 2003 jg@suse.de
- added directory /usr/src/kernel-modules to filelist
* Wed Jun 04 2003 jg@suse.de
- Initial package

Places

File hostapd.spec of Package hostapd (Revision 6b8b31f436ac7ad83ab9f6861da38ad4)

Places