File coreboot-utils.spec of Package coreboot-utils

Overview Repositories Revisions Requests Users Attributes Meta

File coreboot-utils.spec of Package coreboot-utils (Revision 481c1beb84bb905e4f4c75cc365ec60a)

Currently displaying revision 481c1beb84bb905e4f4c75cc365ec60a , Show latest

#
# spec file for package coreboot-utils (Version 0.9.1)
#
# Copyright (c) 2009 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via http://bugs.opensuse.org/
#

# norootforbuild

Name:           coreboot-utils
Url:            http://coreboot.org/
Summary:        A universal flashrom programming utility
Version:        0.9.1
Release:        1
%define nvramtool_version r4625
License:        GPL v2 only ; GPL v2 or later
Group:          Development/Tools/Other
Source0:        flashrom-%{version}.tar.bz2
Source1:        nvramtool-svn-%{nvramtool_version}.tar.bz2
BuildRoot:      %{_tmppath}/%{name}-%{version}-build
BuildRequires:  pciutils-devel zlib-devel
Provides:       flashrom = %{version}
Obsoletes:      flashrom < %{version}
ExclusiveArch:  %ix86 x86_64

%description
flashrom is a utility for reading, writing, verifying and erasing flash ROM
chips. It's often used to flash BIOS/EFI/coreboot/firmware images in-system
using a supported mainboard, but it also supports flashing of network
cards (NICs), SATA controller cards, and other external devices which can
program flash chips.

It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, and
TSOP40 chips, which use various protocols such as LPC, FWH, parallel flash,
or SPI.

nvramtool is a utility for reading/writing coreboot parameters and
displaying information from the coreboot table.  It is intended for x86-based
systems (both 32-bit and 64-bit) that use coreboot.

The coreboot table resides in low physical memory, and may be accessed
through the /dev/mem interface.  It is created at boot time by coreboot, and
contains various system information such as the type of mainboard in use.  It
specifies locations in the CMOS (nonvolatile RAM) where the coreboot
parameters are stored.

Authors:
--------
    Carl-Daniel Hailfinger
    Claus Gindhart <claus.gindhart@kontron.com>
    Dominik Geyer <dominik.geyer@kontron.com>
    Eric Biederman <ebiederman@lnxi.com>
    Giampiero Giancipoli <gianci@email.it>
    Joe Bao <Zheng.Bao@amd.com>
    Luc Verhaegen <libv@skynet.be>
    Li-Ta Lo
    Markus Boas <ryven@ryven.de>
    Nikolay Petukhov <nikolay.petukhov@gmail.com>
    Peter Stuge <peter@stuge.se>
    Reinder E.N. de Haan <lb_reha@mveas.com>
    Ronald G. Minnich <rminnich@gmail.com>
    Ronald Hoogenboom <ronald@zonnet.nl>
    Stefan Reinauer <stepan@coresystems.de>
    Stefan Wildemann <stefan.wildemann@kontron.com>
    Steven James <pyro@linuxlabs.com>
    Uwe Hermann <uwe@hermann-uwe.de>
    Wang Qingpei <Qingpei.Wang@amd.com>
    Yinghai Lu <yinghai.lu@amd.com>
    David S. Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>
    some others

%prep
%setup -q -n flashrom-%{version} -a 1

%build
make %{?jobs:-j%jobs} \
        CFLAGS="$RPM_OPT_FLAGS"
gzip flashrom.8
cd nvramtool-svn-%{nvramtool_version}
make %{?jobs:-j%jobs} \
        CFLAGS="$RPM_OPT_FLAGS"
gzip nvramtool.8

%install
mkdir -p $RPM_BUILD_ROOT/%{_sbindir}
mkdir -p $RPM_BUILD_ROOT/%{_mandir}/man8
install -m 0755 flashrom $RPM_BUILD_ROOT/%{_sbindir}
install -m 0644 flashrom.8.gz $RPM_BUILD_ROOT/%{_mandir}/man8
cd nvramtool-svn-%{nvramtool_version}
install -m 0755 nvramtool $RPM_BUILD_ROOT/%{_sbindir}
install -m 0644 nvramtool.8.gz $RPM_BUILD_ROOT/%{_mandir}/man8
cd -
cp README README.flashrom
cp ChangeLog ChangeLog.flashrom
cp nvramtool-svn-%{nvramtool_version}/COPYING .
cp nvramtool-svn-%{nvramtool_version}/DISCLAIMER DISCLAIMER.nvramtool
cp nvramtool-svn-%{nvramtool_version}/README README.nvramtool
cp nvramtool-svn-%{nvramtool_version}/ChangeLog ChangeLog.nvramtool

%clean
rm -rf %{buildroot}

%files
%defattr(-,root,root)
%doc COPYING
%doc README.flashrom ChangeLog.flashrom serprog-protocol.txt
%doc DISCLAIMER.nvramtool ChangeLog.nvramtool README.nvramtool
%{_sbindir}/flashrom
%{_sbindir}/nvramtool
%{_mandir}/man8/nvramtool.8.gz
%{_mandir}/man8/flashrom.8.gz

%changelog

Places

File coreboot-utils.spec of Package coreboot-utils (Revision 481c1beb84bb905e4f4c75cc365ec60a)

Places