File syslog-service-generator of Package syslogd

Overview Repositories Revisions Requests Users Attributes Meta

File syslog-service-generator of Package syslogd

#!/bin/bash
#
# /lib/systemd/system-generator/syslog-service-generator
#
# Copyright (c) 2011 SuSE LINUX Products GmbH, Germany.
#
# Description:
#
#  Write out syslog.core and if required enable klogd.service
#  depending on the configuration found in /etc/sysconfig/syslog.
#  Also check if network target is required with this we do not
#  required the earlysyslog hack anymore.
#  Based on the /etc/init.d/syslog SysV init boot script as well
#  as on the /etc/init.d/earlysyslog wrapper script.
#
# Author: Werner Fink
# Please send feedback to http://www.suse.de/feedback
#

umask 0022
TMPDIR=/run

export TMPDIR

: ${SBINDIR:=/sbin}
: ${RUN_PATH:=/run/systemd}
: ${SYSUNITDIR:=/lib/systemd/system}
: ${SYSCONFDIR:=/etc/systemd/system}

if test -s /etc/sysconfig/syslog ; then
    CORE=$RUN_PATH/syslog.core
    test -s $CORE -a $CORE -nt /etc/sysconfig/syslog && exit 0
    . /etc/sysconfig/syslog
else
    SYSLOG_DAEMON=rsyslogd
fi

#
# Danger Robinson: do not touch anything if a System logger
# is running under the control of systemd its self!
#
if test -d /sys/fs/cgroup/systemd/system/syslog.service -o \
	-d /sys/fs/cgroup/systemd/system/klogd.service
then
    /bin/logger -i -p daemon.warn -t ${0##*/} \
	'Stop syslog.service before reloading the daemons!'
    exit 1
fi

#
# Update $SYSLOG_DAEMON if not up-to-date
#
if test -z "$SYSLOG_DAEMON" -o ! -x  "$SBINDIR/$SYSLOG_DAEMON" ; then
    for SYSLOG_DAEMON in rsyslogd syslog-ng syslogd ; do
	test -x "$SBINDIR/$SYSLOG_DAEMON" && break
    done
fi

#
# Simple helper for correct permissions of the socket
#
touch ()
{
    local mask=$(umask)
    umask 0066
    /bin/touch ${1+"$@"}
    umask $mask
}

#
# Default is no network and start klogd
#
network=
start_klogd=yes
klogd=klogd.service

#
# Now check for the three possible system loggers for required
# network connection and for external klogd. Note that /var/run
# does not exist at boot time, therefore files and directories
# will be created below the /run tmpfs.
#
case "$SYSLOG_DAEMON" in
syslog-ng)
    syslog=syslog-ng
    config=/etc/syslog-ng/syslog-ng.conf
    socksdir=/var/run/syslog-ng
    socks=$socksdir/additional-log-sockets.conf
    if test -s "$config" ; then
	while read line ; do
	    case "$line" in
	    \#*|"") continue ;;
	    *udp\ *|*udp\(*) network=network.target ;;
	    *tcp\ *|*tcp\(*) network=network.target ;;
	    esac
	done < ${config}
    fi
    if test -r "$config" ; then
	while read line; do
	    case $line in
	    file*/proc/kmsg*)
		start_klogd=no
		break
	    esac
	done < $config
    fi
    /bin/mkdir -p -m 0755 ${socksdir#/var}
    touch ${socks#/var}
    params="$SYSLOG_NG_PARAMS"
    ;;
rsyslogd)
    syslog=rsyslogd
    config=/etc/rsyslog.early.conf
    socksdir=/var/run/rsyslog
    socks=$socksdir/additional-log-sockets.conf
    #
    # In hope this works with the rsyslog.early.conf file
    # (hard to implement for rsyslog with its includes/if
    # statements)...
    #
    if test -s "$config" ; then
	while read select action ; do
	    case "$select" in
	    \#*|"")
		continue
	    esac
	    case "$action" in
	    *@*)
		network=network.target
		break
	    esac
	done < ${config}
	test -n "$network" && config=/etc/rsyslog.conf
    else
	config=/etc/rsyslog.conf
    fi
    if test -r "$config" ; then
	while read one two rest ; do
	    if test "$one" = '$ModLoad' -a "$two" = 'imklog.so' ; then
		start_klogd=no
		break
	    fi
	done < $config
    fi
    /bin/mkdir -p -m 0755 ${socksdir#/var}
    touch ${socks#/var}
    compat=${RSYSLOGD_COMPAT_VERSION:-${RSYSLOGD_NATIVE_VERSION}}
    params="-c ${compat:-3} -f $config $RSYSLOGD_PARAMS"
    ;;
*)
    syslog=syslogd
    config=/etc/syslog.conf
    socksdir=/var/run/syslog
    socks=$socksdir/additional-log-sockets.env
    if test -s "$config" ; then
	while read select action ; do
	    case "$select" in \#*|"") continue ;; esac
	    case "$action" in *@*)    network=network.target ;; esac
	done < ${config}
    fi
    /bin/mkdir -p -m 0755 ${socksdir#/var}
    touch ${socks#/var}
    params="$SYSLOGD_PARAMS"
esac

syslog_bin=${SBINDIR}/$syslog
  klog_bin=${SBINDIR}/klogd

test -s ${config}	|| exit 1
test -x ${syslog_bin}	|| exit 1

#
# Make sure that we have a log fifo which is used by X11
#
if test -e /dev/xconsole -a ! -p /dev/xconsole ; then
    /bin/rm -f /dev/xconsole
fi
if test ! -e /dev/xconsole ; then
    /bin/mknod -m 0600  /dev/xconsole p
    /bin/chown root:tty /dev/xconsole
fi

#
# No klogd.service required
#
test "$start_klogd" = no && klogd=

#
# Create a temporary file for syslog.core
#
trap 'rm -f "$service"' EXIT
tmpcore=$(/bin/mktemp $RUN_PATH/syslog.XXXXXXXX) || exit 1
(/bin/cat > $tmpcore)<<-EOF
	# Warning: Do not edit as this file has been and will be autogenerated
	# by $0
	${network:+Requires=$network}
	${network:+After=$network}
	${klogd:+Requires=$klogd}
	${klogd:+Before=$klogd}

[Service]
	Type=forking
	PIDFile=/var/run/${syslog_bin##*/}.pid
	Sockets=syslog.socket
	StandardOutput=null
	ExecStartPre=/bin/systemctl stop systemd-kmsg-syslogd.service
	ExecStartPre=-$socksdir/addsockets
EOF

#
# For additional sockets we use further configuration files
# for rsyslogd and syslog-ng but an envrionment file for syslogd
#
case "$SYSLOG_DAEMON" in
rsyslogd)
    (/bin/cat > ${socksdir#/var}/addsockets)<<-EOF
	#!/bin/sh
	# Warning: Do not edit as this file has been and will be
	# autogenerated by $0
	test -s /etc/sysconfig/syslog && . /etc/sysconfig/syslog
	umask 0022
	> $socks
	for variable in \${!SYSLOGD_ADDITIONAL_SOCKET*}; do
	    eval value=\\\$\$variable
	    test -z "\$value" && continue
	    test ! -d \${value%/*} && continue
	    echo "\\\$AddUnixListenSocket \$value"
	done >> $socks
	EOF
    ;;
syslog-ng)
    (/bin/cat > ${socksdir#/var}/addsockets)<<-EOF
	#!/bin/sh
	# Warning: Do not edit as this file has been and will be
	# autogenerated by $0
	test -s /etc/sysconfig/syslog && . /etc/sysconfig/syslog
	umask 0022
	echo 'source chroots {' > $socks
	for variable in \${!SYSLOGD_ADDITIONAL_SOCKET*}; do
	    eval value=\\\$\$variable
	    test -z "\$value" && continue
	    test ! -d \${value%/*} && continue
	    echo "unix-dgram(\\"\$value\\");"
	done >> $socks
	echo '};' >> $socks
	EOF
    ;;
*)
    (/bin/cat > ${socksdir#/var}/addsockets)<<-EOF
	#!/bin/sh
	# Warning: Do not edit as this file has been and will be
	# autogenerated by $0
	test -s /etc/sysconfig/syslog && . /etc/sysconfig/syslog
	umask 0022
	echo -n 'ADDITIONAL_SOCKET="' > $socks
	for variable in \${!SYSLOGD_ADDITIONAL_SOCKET*}; do
	    eval value=\\\$\$variable
	    test -z "\$value" && continue
	    test ! -d \${value%/*} && continue
	    echo -n "-a \$value "
	done >> $socks
	echo -n '"' >> $socks
	EOF
    echo "Environment=ADDITIONAL_SOCKET=" >>$tmpcore
    echo "EnvironmentFile=-$socks" 1>>$tmpcore
    params="${params:+$params }\$ADDITIONAL_SOCKET"
esac
chmod u+x ${socksdir#/var}/addsockets

#
# If klogd.service is required handle reload of syslog.service efficient
# otherwise we may loose kernel messages or klogd is forwarding kernel
# messages back to systemd as the creator of the system logging socket
# and we would get a message loop.
#
exec 3>&1 1>>$tmpcore
echo "ExecStart=$syslog_bin $params"
if test "$start_klogd" != no ; then
    echo "ExecReload=/bin/systemctl kill --signal=TSTP klogd.service"
fi
echo "ExecReload=/sbin/killproc -p /var/run/${syslog_bin##*/}.pid -HUP $syslog_bin"
if test "$start_klogd" != no ; then
    echo "ExecReload=/bin/systemctl kill --signal=CONT klogd.service"
    echo "ExecReload=/bin/systemctl kill --signal=USR2 klogd.service"
fi
echo
exec 1>&3 3>&-

#
# If klogd.service is required, remove symbolic link for masking out
# otherwise just add the symbolic link
#
klogserv=$SYSCONFDIR/klogd.service
if test "$start_klogd" != no -a -x ${klog_bin} ; then
    test -h $klogserv && rm -f $klogserv
else
    /bin/ln -sf /dev/null $klogserv
fi

#
# Now enable the service(s) for multi-user target
#
/bin/mv $tmpcore $CORE

if test ! -d $SYSCONFDIR/multi-user.target.wants/ ; then
    /bin/mkdir -p $SYSCONFDIR/multi-user.target.wants
fi

syslogserv=$SYSUNITDIR/syslog.service
enableserv=$SYSCONFDIR/multi-user.target.wants/syslog.service
if test ! -h $enableserv ; then
    /bin/rm -f $enableserv
    /bin/ln -sf $syslogserv $enableserv
fi

klogserv=$SYSUNITDIR/klogd.service
enableserv=$SYSCONFDIR/multi-user.target.wants/klogd.service
disablserv=$SYSCONFDIR/klogd.service
if test "$start_klogd" != no -a -e $klogserv ; then
    if test ! -h $enableserv ; then
	/bin/rm -f $enableserv
	/bin/ln -sf $klogserv $enableserv
    fi
    if test -h $disablserv ; then
	/bin/rm -f $disablserv
    fi
else
    if test ! -h $disablserv ; then
	/bin/rm -f $disablserv
	/bin/ln -sf /dev/null $disablserv
    fi
    if test -h $enableserv ; then
	/bin/rm -f $enableserv
    fi
fi

#
# end of /lib/systemd/system-generator/syslog-service-generator

Places

File syslog-service-generator of Package syslogd

Places