File tn4313.diff of Package avrdude
--- avrdude-5.10/avrdude.conf.in.orig 2011-03-07 20:10:23.000000000 +0100 +++ avrdude-5.10/avrdude.conf.in 2011-03-07 20:12:32.231780000 +0100 @@ -8931,6 +8931,193 @@ part ; #------------------------------------------------------------ +# ATtiny4313 +#------------------------------------------------------------ + +part + id = "t4313"; + desc = "ATtiny4313"; + has_debugwire = yes; + flash_instr = 0xB2, 0x0F, 0x1F; + eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBA, 0x0F, 0xB2, 0x0F, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x23; +## Use the ATtiny26 devcode: + avr910_devcode = 0x5e; + signature = 0x1e 0x92 0x0d; + pagel = 0xD4; + bs2 = 0xD6; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, + 0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, + 0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A, + 0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 256; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + +# The information in the data sheet of April/2004 is wrong, this works: + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + +# The information in the data sheet of April/2004 is wrong, this works: + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + +# The information in the data sheet of April/2004 is wrong, this works: + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny4313 has Signature Bytes: 0x1E 0x92 0x0D. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +# The Tiny4313 has calibration data for both 4 MHz and 8 MHz. +# The information in the data sheet of April/2004 is wrong, this works: + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ # AT90PWM2 #------------------------------------------------------------
