File speech-dispatcher.init of Package speech-dispatcher

Overview Repositories Revisions Requests Users Attributes Meta

File speech-dispatcher.init of Package speech-dispatcher

#! /bin/sh

### BEGIN INIT INFO
# Provides:          speech-dispatcher
# Required-Start:    $remote_fs
# Should-Start:      festival
# Required-Stop:     $remote_fs
# Should-Stop:       festival
# Default-Start:     2 3 5
# Default-Stop:      0 1 6
# Description:       Common interface to speech synthesizers
# Short-Description: Speech Dispatcher
### END INIT INFO

# Note on runlevels: 
# 0 - halt/poweroff                     6 - reboot
# 1 - single user                       2 - multiuser without network exported
# 3 - multiuser w/ network (text mode)  5 - multiuser w/ network and X11 (xdm)
# 
# Note on script names:
# http://www.linuxbase.org/spec/refspecs/LSB_1.2.0/gLSB/scrptnames.html
# A registry has been set up to manage the init script namespace.
# http://www.lanana.org/
# Please use the names already registered or register one or use a
# vendor prefix.

# Check for missing binaries (stale symlinks should not happen)
SPEECH_DISPATCHER_BIN=/usr/bin/speech-dispatcher
test -x $SPEECH_DISPATCHER_BIN || exit 5

# Source LSB init functions
# providing start_daemon, killproc, pidofproc, 
# log_success_msg, log_failure_msg and log_warning_msg.
# This is currently not used by UnitedLinux based distributions and
# not needed for init scripts for UnitedLinux only. If it is used,
# the functions from rc.status should not be sourced or used.
#. /lib/lsb/init-functions

# Shell functions sourced from /etc/rc.status:
#      rc_check         check and set local and overall rc status
#      rc_status        check and set local and overall rc status
#      rc_status -v     be verbose in local rc status and clear it afterwards
#      rc_status -v -r  ditto and clear both the local and overall rc status
#      rc_status -s     display "skipped" and exit with status 3
#      rc_status -u     display "unused" and exit with status 3
#      rc_failed        set local and overall rc status to failed
#      rc_failed <num>  set local and overall rc status to <num>
#      rc_reset         clear both the local and overall rc status
#      rc_exit          exit appropriate to overall rc status
#      rc_active        checks whether a service is activated by symlinks
#      rc_splash arg    sets the boot splash screen to arg (if active)
. /etc/rc.status

# Reset status of this service
rc_reset

# Return values acc. to LSB for all commands but status:
# 0       - success
# 1       - generic or unspecified error
# 2       - invalid or excess argument(s)
# 3       - unimplemented feature (e.g. "reload")
# 4       - user had insufficient privileges
# 5       - program is not installed
# 6       - program is not configured
# 7       - program is not running
# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
# 
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signaling is not supported) are
# considered a success.

case "$1" in
    start)
        echo -n "Starting speech dispatcher "
        ## Start daemon with startproc(8). If this fails
        ## the return value is set appropriately by startproc.
        startproc -q -e $SPEECH_DISPATCHER_BIN

# Remember status and be verbose
        rc_status -v
        ;;
    stop)
        echo -n "Shutting down speech dispatcher "
        ## Stop daemon with killproc(8) and if this fails
        ## killproc sets the return value according to LSB.
        killproc -TERM $SPEECH_DISPATCHER_BIN

# Remember status and be verbose
        rc_status -v
        ;;
    try-restart)
        ## Do a restart only if the service was active before.
        ## Note: try-restart is not (yet) part of LSB (as of 1.2)
        $0 status >/dev/null &&  $0 restart

# Remember status and be quiet
        rc_status
        ;;
    restart)
        ## Stop the service and regardless of whether it was
        ## running or not, start it again.
        $0 stop
        $0 start

# Remember status and be quiet
        rc_status
        ;;
    reload|force-reload)

echo -n "Reload speech dispatcher "
        $0 stop  &&  $0 start
        #rc_status
        ;;
    status)
        echo -n "Checking for speech dispatcher "
        ## Check status with checkproc(8), if process is running
        ## checkproc will return with exit status 0.

# Return value is slightly different for the status command:
        # 0 - service up and running
        # 1 - service dead, but /var/run/  pid  file exists
        # 2 - service dead, but /var/lock/ lock file exists
        # 3 - service not running (unused)
        # 4 - service status unknown :-(
        # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)

# NOTE: checkproc returns LSB compliant status values.
        checkproc $SPEECH_DISPATCHER_BIN
        # NOTE: rc_status knows that we called this init script with
        # "status" option and adapts its messages accordingly.
        rc_status -v
        ;;
    *)
        echo "Usage: $0 {start|stop|status|try-restart|restart|relaod|force-reload}"
        exit 1
        ;;
esac
rc_exit

Places

File speech-dispatcher.init of Package speech-dispatcher

Places