File clisp.spec of Package clisp
#
# spec file for package clisp
#
# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
# minimum suse version where the full featured package builds
%define min_suse_ver 1030
Name: clisp
BuildRequires: db-devel
BuildRequires: gdbm-devel
BuildRequires: gtk2-devel
BuildRequires: libglade2-devel
BuildRequires: openssl-devel
BuildRequires: pcre-devel
BuildRequires: postgresql-devel
BuildRequires: readline-devel
%if 0%{?suse_version} >= %min_suse_ver
BuildRequires: dbus-1-devel
BuildRequires: fdupes
BuildRequires: xorg-x11-devel
%endif
#
# If set to yes do not forget to add
# gcc-c++
# to BuildRequires
#
%define debug no
Requires(pre): vim
Version: 2.49
Release: 0
Summary: A Common Lisp Interpreter
License: GPL-2.0+
Group: Development/Languages/Other
Url: http://clisp.cons.org
Source0: http://switch.dl.sourceforge.net/sourceforge/clisp/clisp-2.49.tar.bz2
# Original source at http://www.haible.de/bruno/gnu/ffcall-1.10.tar.gz
# adopted to work with clisp-2.43 and higher
Source1: ffcall-1.10+2.43.tar.bz2
Source2: ftp://ftp.gnu.org/pub/gnu/libsigsegv/libsigsegv-2.10.tar.gz
Source3: clisp-rpmlintrc
Source4: README.SuSE
Patch0: clisp-2.49.dif
Patch1: clisp-2.44.1-map_private.patch
Patch2: clisp-2.44.1-map_variable.patch
Patch3: clisp-2.49-personality.patch
Patch4: clisp-2.44.1-ia64.dif
Patch7: clisp-2.39-ia64-wooh.dif
Patch8: clisp-2.39-clx.dif
Patch10: ffcall-1.10+2.43.dif
Patch11: fix-build-in-qemu.patch
Patch12: clisp-linux.patch
Patch13: clisp-glibc-fix.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-build
%global vimdir %{_datadir}/vim/site/after/syntax
%global xarch ppc64 s390x armv4l
ExcludeArch: ppc64 s390x armv4l
%description
Common Lisp is a high-level, all-purpose programming language. CLISP is
an implementation of Common Lisp that closely follows the book "Common
Lisp - The Language" by Guy L. Steele Jr. This package includes an
interactive programming environment with an interpreter, a compiler,
and a debugger. Start this environment with the command 'clisp'.
CLISP documentation is placed in the following directories:
/usr/share/doc/packages/clisp/
/usr/share/doc/packages/clisp/doc/
As well as the conventional CLISP, this package also includes CLX, an
extension of CLISP for the X Window System. The X Window System must be
installed before running the clx command. The description of this CLX
version (new-clx) is placed in
/usr/share/doc/packages/clisp/clx/
with the file README. The subdirectory
/usr/share/doc/packages/clisp/clx/demos/
contains two nice applications.
%prep
%setup -qT -b0 -a1 -a2
%patch1 -p1 -b .mappriv
%patch2 -p1 -b .mapvar
%patch3 -p1 -b .sel
%patch4 -p1 -b .ia64
%patch7 -p1 -b .wooh
%patch8 -p1 -b .clx
%patch10 -p1 -b .ffcall
%patch0 -p1
%if 0%{?qemu_user_space_build:1}
# qemu does not support stack overflows well ;)
%patch11 -p1 -b .qemu
%endif
%patch12 -p1
%if 0%{?suse_version} > 1220
%patch13 -p1 -b .glibc
%endif
%build
#
# Overwrite stack size limit (hopefully a soft limit only)
#
ulimit -Ss unlimited || true
ulimit -Hs unlimited || true
unset LC_CTYPE
LANG=POSIX
LC_ALL=POSIX
export LANG LC_ALL
#
# Current system
#
SYSTEM=${RPM_ARCH}-suse-linux
export PATH="$PATH:."
#
# Set gcc command line but do not use CFLAGS
#
if test %debug = yes ; then
CC="g++"
else
CC="gcc"
fi
CC="${CC} -g ${RPM_OPT_FLAGS} -fno-strict-aliasing -fPIC -pipe"
case "$RPM_ARCH" in
i[0-9]86) CC="${CC} -falign-functions=4 -mieee-fp -ffloat-store" ;;
ppc) CC="${CC}" ;;
s390) CC="${CC}" ;;
x86_64) CC="${CC} -fno-gcse" ;;
sparc*) CC="${CC} -fno-gcse" ;;
ppc64) CC="${CC} -fno-gcse -mpowerpc64" ;;
s390x) CC="${CC} -fno-gcse" ;;
ia64) CC="${CC} -fno-gcse" ;;
axp|alpha) CC="${CC}" ;;
esac
noexec='-DLINUX_NOEXEC_HEAPCODES'
nommap='-DNO_MULTIMAP_SHM -DNO_MULTIMAP_FILE -DNO_SINGLEMAP -DNO_TRIVIALMAP'
safety='-DSAFETY=3 -O'
MYCFLAGS="${MYCFLAGS} -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64"
MYCFLAGS="${MYCFLAGS} -D_GNU_SOURCE -Wno-unused -Wno-uninitialized"
case "$RPM_ARCH" in
i[0-9]86) MYCFLAGS="${MYCFLAGS} ${noexec}" ;;
ppc) MYCFLAGS="${MYCFLAGS} ${noexec}" ;;
s390) MYCFLAGS="${MYCFLAGS} ${noexec}" ;;
x86_64) MYCFLAGS="${MYCFLAGS} ${safety}" ;;
sparc*) MYCFLAGS="${MYCFLAGS} ${safety}" ;;
ppc64) MYCFLAGS="${MYCFLAGS} ${safety} -DWIDE_HARD" ;;
s390x) MYCFLAGS="${MYCFLAGS} ${safety} -DWIDE_HARD" ;;
ia64) MYCFLAGS="${MYCFLAGS} ${safety}" ;;
axp|alpha) MYCFLAGS="${MYCFLAGS} ${nommap}" ;;
esac
export CC
export MYCFLAGS
unset cfi386 noexec nommap safety
#
# Environment for the case of missing terminal
#
rm -rf /tmp/clispIO
mknod /tmp/clispIO p
cat /tmp/clispIO &
exec 0< /dev/null
exec 1> /tmp/clispIO 2>&1
#
# Build the current system
#
if test %debug = yes ; then
DEBUG=--with-debug
MYCFLAGS="${MYCFLAGS} -g3 -DDEBUG_GCSAFETY"
else
DEBUG=""
MYCFLAGS="${MYCFLAGS}"
fi
#
# May interfere with configure
#
unset CFLAGS
#
# The libsigsegv
#
SEGV=${PWD}/libsigsegv
pushd libsigsegv-*/
./configure --build ${SYSTEM} ${DEBUG}\
--prefix=%{_prefix} \
--libdir=%{_libdir}
make
make check
make DESTDIR=${SEGV} install
popd
SEGV=${SEGV}/usr
#
# The libffcall
#
%ifnarch %xarch
FFCALL=${PWD}/ffcall
pushd ffcall-*
./configure --build ${SYSTEM} ${DEBUG}\
--prefix=%{_prefix} \
--libdir=%{_libdir}
make -C avcall
make -C callback
make -C avcall check
make -C callback check
make DESTDIR=${FFCALL} install
popd
FFCALL=${FFCALL}/usr
%endif
#
#
#
find -name configure | xargs -r \
sed -ri "/ac_precious_vars='build_alias\$/ {N; s/build_alias\\n//; }"
#
# The modules i18n, syscalls, regexp
# are part of the base clisp system.
#
./configure --build ${SYSTEM} ${DEBUG} \
--prefix=%{_prefix} \
--exec-prefix=%{_prefix} \
--libdir=%{_libdir} \
--vimdir=%{vimdir} \
--fsstnd=suse \
--with-readline \
--with-libsigsegv-prefix=${SEGV}\
%ifnarch %xarch
--with-libffcall-prefix=${FFCALL}\
%else
--without-ffcall \
%endif
--with-dynamic-modules \
--with-gettext \
%if 0%{?suse_version} >= %min_suse_ver
--with-module=dbus \
%endif
--with-module=queens \
--with-module=gdbm \
--with-module=gtk2 \
--with-module=pcre \
--with-module=rawsock \
--with-module=zlib \
--with-module=wildcard \
--with-module=bindings/glibc \
--with-module=clx/new-clx \
--with-module=berkeley-db \
--with-module=postgresql
pushd src/
make
make check
popd
#
# Remove pipe
#
rm -f /tmp/clispIO
#
# Check for errors
#
test -z "$(ls tests/*.erg 2>/dev/null)"
%install
#
# Current system
#
SYSTEM=${RPM_ARCH}-suse-linux
LSPDOC=%{_docdir}/clisp
DOCDOC=${LSPDOC}/doc
CLXDOC=${LSPDOC}/clx
LSPLIB=%{_libdir}/clisp-%{version}
CLXLIB=${LSPLIB}/full
#
# Install the current system
#
pushd src/
make install prefix=%{_prefix} \
exec_prefix=%{_prefix} \
mandir=%{_mandir} \
libdir=%{_libdir} \
DESTDIR=%{buildroot} \
INSTALL_DATA='install -cm 0444'
popd
#
# The CLX interface
#
install -d %{buildroot}${CLXDOC}
install -d %{buildroot}${CLXLIB}
pushd modules/clx/new-clx/
install -c -m 0444 README %{buildroot}${CLXDOC}/
install -c -m 0444 %{S:4} %{buildroot}${CLXDOC}/
tar cf - demos/ | (cd %{buildroot}${CLXDOC}/ ; tar xf - )
popd
pushd modules/clx/
tar xfz clx-manual.tar.gz -C %{buildroot}${CLXDOC}
popd
find %{buildroot} -name "*.a" | xargs chmod u+w
chmod u+xrw,a+rx %{buildroot}%{_bindir}/clisp
chmod u+xrw,a+rx %{buildroot}%{_bindir}/clisp-link
chmod -R g+r,o+r %{buildroot}${LSPDOC}/
chmod a-x %{buildroot}${CLXDOC}/clx-manual/html/doc-index.cgi
find %{buildroot}${LSPDOC} -type d | xargs chmod 755
rm -f %{buildroot}${CLXDOC}/*,v
rm -f %{buildroot}${CLXDOC}/.\#*
rm -f %{buildroot}${CLXDOC}/demos/*,v
rm -f %{buildroot}${CLXDOC}/demos/.\#*
rm -f %{buildroot}${CLXDOC}/demos/*.orig
find %{buildroot}${LSPLIB}/ -name '*.dvi' | xargs -r rm -f
find %{buildroot}${LSPLIB}/ -name '*.run' | xargs -r chmod 0755
%if 0%{?suse_version} >= %min_suse_ver
%fdupes %{buildroot}${LSPLIB}/
%endif
%find_lang clisp
%find_lang clisplow clisp.lang
%files -f clisp.lang
%defattr(-,root,root,755)
%doc %{_docdir}/clisp/
%{_bindir}/clisp
%{_bindir}/clisp-link
%{_libdir}/clisp-%{version}/
%{_datadir}/aclocal/clisp.m4
%{_datadir}/emacs/site-lisp/clhs.el
%{_datadir}/emacs/site-lisp/clisp-coding.el
%{_datadir}/emacs/site-lisp/clisp-ffi.el
%{_datadir}/emacs/site-lisp/clisp-indent.el
%{_datadir}/emacs/site-lisp/clisp-indent.lisp
# Do not touch this but wait on check in of new vim!!!
%{vimdir}/lisp.vim
%doc %{_mandir}/man1/clisp.1.gz
%doc %{_mandir}/man1/clisp-link.1.gz
%changelog
