File gcc.spec.in of Package gcc43
# spec file for package gcc43 (Version 4.3.x)
#
# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
# icecream 0
# Run the testsuite if there's a file named RUN_TESTS in the source
%if 0%{!?run_tests:1}
%define run_tests %(test -f %_sourcedir/RUN_TESTS && echo 1 || echo 0)
%endif
# Ada currently fails to build on a few platforms, enable it only
# on those that work
# Note that AdaCore only supports %ix86, x86_64 and ia64
%ifarch %ix86 x86_64 ppc s390 ia64
%define build_ada !0%{?building_libjava:1}%{?building_libffi:1}
%else
# alpha ppc64 s390x hppa
%define build_ada 0
%endif
# We don't want to build java on arm
%ifarch mips %arm
%define build_java 0
%define build_libjava 0
%else
%define build_java 1
%define build_libjava 0%{?building_libjava:1}%{?building_libffi:1}
%endif
%define build_cp 1
%define build_fortran 1
%define build_objc 1
%define build_objcp !0%{?building_libjava:1}%{?building_libffi:1}
%define build_with_mudflap 0
%if %{build_objcp}
%define build_cp 1
%define build_objc 1
%endif
%if %{build_libjava}
%define build_cp 1
%endif
Name: gcc@base_ver@
ExcludeArch: %arm
BuildRequires: bison flex gettext-devel glibc-devel-32bit mpfr-devel perl zlib-devel
%if %{suse_version} > 1220
BuildRequires: makeinfo
%else
BuildRequires: texinfo
%endif
%if %{build_ada}
%if %{suse_version} > 1110
%define hostsuffix -4.3
BuildRequires: gcc43-ada
%else
%define hostsuffix %{nil}
BuildRequires: gcc-ada
%endif
%endif
%if %{build_libjava}
%if 0%{!?building_libffi:1}
BuildRequires: fastjar gtk2-devel libart_lgpl-devel unzip
%endif
%endif
%ifarch ia64
BuildRequires: libunwind-devel
%endif
%if %{run_tests}
BuildRequires: dejagnu expect
%endif
# Define version number of libgcc_s
%ifarch hppa
%define libgcc_s 4
%else
%define libgcc_s 1
%endif
%ifarch ppc
# We support building the nof libraries, but don't want this in the
# regular rpms
%define build_nof 0
%else
%define build_nof 0
%endif
%define separate_bi32 0
%define separate_bi64 0
%ifarch ppc
# Beware, this does _not_ separate libgcj, as for that one multilibing
# is inactive for the time being
%define separate_bi64 1
%endif
%ifarch x86_64 s390x ppc64
%define separate_bi32 1
%endif
# Define two macros to trigger -32bit or -64bit package variants
%define separate_biarch 0
%if %{separate_bi32}
%define separate_biarch 1
%define separate_biarch_suffix -32bit
%endif
%if %{separate_bi64}
%define separate_biarch 1
%define separate_biarch_suffix -64bit
%endif
%ifarch x86_64 ia64 s390x alpha ppc64
# 64-bit is primary build target
%define build_primary_64bit 1
%else
%define build_primary_64bit 0
%endif
%define biarch_libjava 0
# COMMON-BEGIN
%define biarch_targets x86_64 s390x powerpc64 powerpc
URL: http://gcc.gnu.org/
Version: 4.3.4_20091019
Release: 1
%define gcc_version %(echo %version | sed 's/_.*//')
%define gcc_dir_version %(echo %gcc_version | cut -d '.' -f 1-2)
%define snapshot_date %(echo %version | sed 's/[34]\.[0-4]\.[0-6]//' | sed 's/_/-/')
%define binsuffix -4.3
# COMMON-END
%if !0%{?building_libjava:1}%{?building_libffi:1}
Requires: binutils glibc-devel
Requires: cpp@base_ver@ = %{version}-%{release}
Requires: libgcc%{libgcc_s} >= %{version}-%{release}
Requires: libgomp1 >= %{version}-%{release}
%if %{build_with_mudflap}
Requires: libmudflap0 >= %{version}-%{release}
Requires: libmudflapth0 >= %{version}-%{release}
%endif
%if 0%{suse_version} > 1000
Suggests: gcc@base_ver@-info gcc@base_ver@-locale
%endif
%endif
# COMMON-BEGIN
Autoreqprov: on
BuildRoot: %{_tmppath}/%{name}-%{version}-build
Source: gcc-%{gcc_version}%{snapshot_date}.tar.bz2
Source1: change_spec
Source2: libgcj43-rpmlintrc
Source3: gcc43-rpmlintrc
Source4: ecj.jar
Source5: README.First-for.SuSE.packagers
Source6: baselibs.conf
Patch1: gcc-dir-version.patch
Patch2: gcc-sles-version.patch
Patch3: gcc-noalias-warn.diff
Patch4: gcc-add-defaultsspec.diff
Patch5: boehm-gc-strict-aliasing.patch
Patch6: suse-record-gcc-opts.diff
Patch7: acats-timeout.patch
Patch10: program-transform-name.diff
Patch11: program-transform-name-tools.diff
Patch12: gcc4-ppc64-m32-m64-multilib-only.patch
Patch22: libjava-no-static.diff
Patch23: libjava-no-multilib.diff
Patch24: tls-no-direct.diff
Patch25: pr27880.diff
Patch28: pr33763.diff
Patch29: pr40141.diff
Patch30: Wunprototyped-calls.diff
Patch31: pr27799-1.diff
Patch32: pr27799-2.diff
Patch33: pr27799-3.diff
Patch41: fpreserve-function-arguments43.patch
Patch42: pr27975.diff
Patch43: build-id.diff
Patch44: nvl428413.patch
Patch45: nvl423594.patch
Patch46: pr32277.diff
Patch47: gcc43-as-g0
Patch48: pr38591.diff
Patch202: nvl440482.patch
Patch204: pr39675.diff
Patch205: pr42429.diff
Patch206: pr42614.diff
Patch207: pr45502.diff
Patch208: pr47278.diff
Patch209: nvl675609.patch
Patch210: nvl665849.patch
Patch211: gcc43-better-debuginfo.diff
Patch212: gcc43-better-debuginfo-2.diff
Patch213: gcc-unwind-glibc216.patch
# A set of patches from the RH srpm
Patch50: gcc43-c++-builtin-redecl.patch
Patch51: gcc41-ia64-stack-protector.patch
Patch52: gcc43-java-debug-iface-type.patch
Patch53: gcc43-libgomp-omp_h-multilib.patch
Patch54: gcc43-pr34037.patch
Patch55: gcc41-java-slow_pthread_self.patch
Patch56: gcc43-pr36741-revert.patch
Patch57: gcc41-ppc32-retaddr.patch
Patch58: gcc43-pr37189.patch
Patch59: gcc43-x86_64-va_start.patch
# Some patches taken from Debian
Patch60: gcc43-textdomain.patch
Patch61: gcc43-rename-info-files.patch
# Patches for AMD features
Patch70: pr34043-1.diff
Patch71: pr34043-2.diff
Patch72: pr34043-3.diff
Patch73: pr34043-4.diff
Patch74: pr34043-5.diff
Patch75: amd-SSE5-shift-ppc-1.diff
Patch76: amd-SSE5-shift-ppc-2.diff
Patch77: amd-SSE5-shift.diff
Patch78: amd-cunroll-1.diff
Patch79: amd-cunroll-2.diff
Patch81: amd-cvect-1.diff
Patch82: amd-cvect-2.diff
# Patches for Intel features
Patch80: intel303993-aes.diff
# Patches for IBM features
Patch90: ibm304071-z10-1
Patch91: ibm304071-z10-2
Patch92: ibm304071-z10-3
Patch93: ibm304071-z10-4
Patch94: ibm304071-z10-5
Patch95: ibm304071-z10-6
Patch96: pr36745.diff
Patch97: pr36822.diff
Patch99: ibm-vector-keyword-1
Patch100: ibm-vector-keyword-2
Patch101: ibm-vector-keyword-3
Patch102: diff-z6-scheduling
Patch103: ibm304134-power7-1
Patch104: ibm-cell-split
Patch105: ibm-cell-split-fixes
Patch106: nvl425806.patch
Patch109: nvl425783.patch
Patch110: nvl425784.patch
Patch111: nvl425788.patch
Patch112: nvl425789.patch
Patch114: nvl425791.patch
Patch115: nvl425794.patch
Patch116: nvl425798-1.patch
Patch117: nvl425798-2.patch
Patch118: nvl425799.patch
Patch119: nvl426087.patch
Patch120: ibm304071-z10-8
Patch121: nvl434500.patch
Patch122: nvl436041.patch
Patch123: gcc43-no-unwind-tables.diff
Patch124: nvl441016.patch
Patch126: nvl447669.diff
Patch127: nvl464739.patch
Patch128: ibm434505-spu
Patch1281: nvl712118.patch
Patch129: nvl623386.patch
# Patches for SAP features
Patch130: sap303956-utf16-1.diff
Patch131: sap303956-utf16-2.diff
Patch132: sap303956-utf16-3.diff
Patch133: sap303956-utf16-4.diff
Patch134: sap303956-utf16-mangling.diff
# Patches for SP1 IBM features
Patch140: z10-IJ-constraints
Patch141: s390-mvc-mov
Patch142: z10-sched-fixes1
Patch143: z10-sched-fixes3
Patch144: z10-sched-fixes4
Patch145: diff-vortex-1
Patch146: s390-address-constraints
Patch147: true-comp-z10
Patch148: s390-max-unroll-insn-default
Patch149: s390-long-loop-prediction-1
Patch150: z10-cost
Patch151: stcmh-fix
Patch152: diff-symref-align-constpool
Patch160: gcc-power7-sles-11sp1.patch02a
Patch162: gcc-power7-sles-11sp1.patch02c
Patch163: gcc-power7-sles-11sp1.patch02d
Patch164: gcc-power7-sles-11sp1.patch02e
Patch165: gcc-power7-sles-11sp1.patch02f
Patch166: gcc-power7-sles-11sp1-nvl572812.patch
Patch167: gcc-power7-sles-11sp1-bnc729378.patch
# Patches for SP2 IBM features
Patch170: ibm311554-ltoc-r157731:157732
Patch171: ibm311554-ltoc-r160772:160773
Patch172: ibm311554-ltoc-r160977:160978
Patch173: ibm311554-ltoc-r161370:161371
Patch174: ibm311554-ltoc-r164044:164046
Patch175: ibm311554-ltoc-r164552:164553
Patch176: ibm311554-ltoc-r169076:169077
Patch177: ibm311554-ltoc-r169426:169427
Patch178: ibm311554-ltoc-r170605:170606
Patch179: ibm311554-ltoc-r170975:170976
Patch180: ibm311554-ltoc-r171904:171905
Patch181: ibm311554-ltoc-cmodel_small.diff
Patch182: s390-fmadd-2mem
Patch183: prefetch-schedule-barrier
Patch184: s390-z10-bypasses
Patch185: s390-remove-copysign
Patch187: s390-movqi-memmem
Patch188: s390-memxxx-prefetchs
Patch189: s390-option-defaults
Patch190: loop-unroll-adjust
Patch191: s390-31bit-sibcall-fix
Patch192: s390-peel-times-default
Patch193: s390-movqi-typo
Patch194: s390-remove-loadfpzero
Patch195: s390-fix-z10prop
Patch196: s390-literalpool-qrst
Patch197: s390-improve-loadfpzero
Patch198: s390-literalpool-cse
Patch199: s390-symref-preferredreload
Patch200: nvl702947-power7-vsx-abi.patch
# LIBFFI-DELETE-BEGIN
# LIBJAVA-DELETE-BEGIN
Group: Development/Languages/C and C++
Summary: The GNU C Compiler and Support Files
License: GPL-3.0+
%description
Core package for the GNU Compiler Collection, including the C language
frontend.
Language frontends other than C are split to different sub-packages,
namely gcc-ada, gcc-c++, gcc-fortran, gcc-java, gcc-objc and
gcc-obj-c++.
# COMMON-END
%package -n gcc@base_ver@-32bit
License: GPL-3.0+
Summary: The GNU C Compiler 32bit support
Group: Development/Languages/C and C++
Autoreqprov: on
Requires: gcc@base_ver@ = %{version}-%{release}
Requires: libgcc%{libgcc_s}-32bit >= %{version}-%{release}
Requires: libgomp1-32bit >= %{version}-%{release}
%if %{build_with_mudflap}
Requires: libmudflap0-32bit >= %{version}-%{release}
Requires: libmudflapth0-32bit >= %{version}-%{release}
%endif
Requires: glibc-devel-32bit
%description -n gcc@base_ver@-32bit
This package contains 32bit support for the GNU Compiler Collection.
%package -n gcc@base_ver@-64bit
License: GPL-3.0+
Summary: The GNU C Compiler 64bit support
Group: Development/Languages/C and C++
Autoreqprov: on
Requires: gcc@base_ver@ = %{version}-%{release}
Requires: libgcc%{libgcc_s}-64bit >= %{version}-%{release}
Requires: libgomp1-64bit >= %{version}-%{release}
%if %{build_with_mudflap}
Requires: libmudflap0-64bit >= %{version}-%{release}
Requires: libmudflapth0-64bit >= %{version}-%{release}
%endif
Requires: glibc-devel-64bit
%description -n gcc@base_ver@-64bit
This package contains 64bit support for the GNU Compiler Collection.
%package locale
License: GPL-3.0+
Summary: Locale Data for the GNU Compiler Collection
Group: Development/Languages/C and C++
Requires: gcc@base_ver@ = %{version}-%{release}
Autoreqprov: on
%description locale
Locale data for the GNU Compiler Collection (GCC) to give error message
in the current locale.
%package c++
License: GPL-3.0+
Summary: The GNU C++ Compiler
Group: Development/Languages/C and C++
Autoreqprov: on
Requires: gcc@base_ver@ = %{version}-%{release}
Requires: libstdc++@base_ver@-devel = %{version}-%{release}
%description c++
This package contains the GNU compiler for C++.
# PACKAGE-BEGIN
%package -n libstdc++@base_ver@-devel@variant@
License: GPL-2.0+
Summary: Include Files and Libraries mandatory for Development
Group: System/Libraries
Autoreqprov: on
Requires: libstdc++6@variant@ >= %{version}-%{release}
Requires: glibc-devel@variant@
%ifarch ia64
Requires: libunwind-devel
%endif
%description -n libstdc++@base_ver@-devel@variant@
This package contains all the headers and libraries of the standard C++
library. It is needed for compiling C++ code.
# PACKAGE-END
%package -n libstdc++@base_ver@-doc
License: GPL-2.0+
Summary: Documentation for the GNU C++ standard library
Group: Development/Languages/C and C++
Autoreqprov: on
%description -n libstdc++@base_ver@-doc
Documentation for the GNU C++ standard library
# PACKAGE-BEGIN
%package -n libgcc@base_ver@@variant@
License: GPL-2.0+
Summary: C compiler runtime library
Group: System/Base
Provides: libgcc@variant@ = %{version}-%{release}
Obsoletes: libgcc@variant@ < %{version}-%{release}
Provides: libgcc%{libgcc_s}@variant@ = %{version}-%{release}
Obsoletes: libgcc%{libgcc_s}@variant@ < %{version}-%{release}
# make rpm happy
Obsoletes: libgcc33@variant@ libgcc41@variant@ libgcc42@variant@
# make zypp happy
Provides: libgcc33@variant@ libgcc41@variant@ libgcc42@variant@
# make SLE9 ppc -> SLE11 ppc64 update happy
%if "@variant@" == ""
%ifarch ppc64
Obsoletes: libgcc-64bit
%endif
%endif
Autoreqprov: on
%description -n libgcc@base_ver@@variant@
Libgcc is needed for dynamically linked C programs.
%post -n libgcc@base_ver@@variant@
/sbin/ldconfig
%postun -n libgcc@base_ver@@variant@
/sbin/ldconfig
# PACKAGE-END
# PACKAGE-BEGIN
%package -n libgomp@base_ver@@variant@
License: LGPL-2.1+
Summary: The GNU compiler collection OpenMP runtime library
Group: System/Base
Provides: libgomp@variant@ = %{version}-%{release}
Obsoletes: libgomp@variant@ < %{version}-%{release}
Provides: libgomp1@variant@ = %{version}-%{release}
Obsoletes: libgomp1@variant@ < %{version}-%{release}
# make rpm happy
Obsoletes: libgomp42@variant@
# make zypp happy
Provides: libgomp42@variant@
Autoreqprov: on
%description -n libgomp@base_ver@@variant@
This is the OpenMP runtime library needed by OpenMP enabled programs
that were built with the -fopenmp compiler option and by programs that
were auto-parallelized via the -ftree-parallelize-loops compiler
option.
%post -n libgomp@base_ver@@variant@
/sbin/ldconfig
%postun -n libgomp@base_ver@@variant@
/sbin/ldconfig
# PACKAGE-END
# PACKAGE-BEGIN
%package -n libstdc++@base_ver@@variant@
License: GPL-2.0+
Summary: The standard C++ shared library
Group: System/Libraries
Provides: libstdc++@variant@ = %{version}-%{release}
Obsoletes: libstdc++@variant@ < %{version}-%{release}
Provides: libstdc++6@variant@ = %{version}-%{release}
Obsoletes: libstdc++6@variant@ < %{version}-%{release}
# make rpm happy
Obsoletes: libstdc++41@variant@ libstdc++42@variant@
# make zypp happy
Provides: libstdc++41@variant@ libstdc++42@variant@
# make SLE9 ppc -> SLE11 ppc64 update happy
%if "@variant@" == ""
%ifarch ppc64
Obsoletes: libstdc++-64bit
%endif
%endif
Autoreqprov: on
%description -n libstdc++@base_ver@@variant@
The standard C++ library, needed for dynamically linked C++ programs.
%post -n libstdc++@base_ver@@variant@
/sbin/ldconfig
%postun -n libstdc++@base_ver@@variant@
/sbin/ldconfig
# PACKAGE-END
%package info
License: GFDL-1.1
Summary: Documentation for the GNU compiler collection
Group: Development/Languages/C and C++
Autoreqprov: on
PreReq: %{install_info_prereq}
%description info
GNU info-pages for the GNU compiler collection covering both user-level
and internals documentation.
# PACKAGE-BEGIN
%package objc@variant@
License: GPL-3.0+
Summary: GNU Objective C Compiler
Group: Development/Languages/Other
Autoreqprov: on
Requires: gcc@base_ver@ = %{version}-%{release}
Requires: libobjc2@variant@ >= %{version}-%{release}
%description objc@variant@
This package contains the GNU Objective C compiler. Objective C is an
object oriented language, created by Next Inc. and used in their
Nextstep OS. The source code is available in the gcc package.
# PACKAGE-END
# PACKAGE-BEGIN
%package -n libobjc@base_ver@@variant@
License: GPL-2.0+
Summary: Library for the GNU Objective C Compiler
Group: Development/Libraries/Other
Provides: libobjc2@variant@ = %{version}-%{release}
Obsoletes: libobjc2@variant@ < %{version}-%{release}
# unless so version changes again for libobjc
# make rpm happy
Obsoletes: libobjc42@variant@
# make zypp happy
Provides: libobjc42@variant@
%description -n libobjc@base_ver@@variant@
The library for the GNU Objective C compiler.
%post -n libobjc@base_ver@@variant@
/sbin/ldconfig
%postun -n libobjc@base_ver@@variant@
/sbin/ldconfig
# PACKAGE-END
%package obj-c++
License: GPL-3.0+
Summary: GNU Objective C++ Compiler
Group: Development/Languages/Other
Autoreqprov: on
Requires: gcc@base_ver@-objc = %{version}-%{release}
Requires: gcc@base_ver@-c++ = %{version}-%{release}
%description obj-c++
This package contains the GNU Objective C++ compiler. Objective C++ is an
object oriented language, created by Next Inc. and used in their
Nextstep OS. The source code is available in the gcc package.
%package -n cpp@base_ver@
License: GPL-3.0+
Summary: The GCC Preprocessor
Group: Development/Languages/C and C++
%description -n cpp@base_ver@
This Package contains just the preprocessor that is used by the X11
packages.
%package ada
License: GPL-3.0+
Requires: gcc@base_ver@ = %{version}-%{release}
Requires: libada@base_ver@ = %{version}-%{release}
Summary: GNU Ada95 Compiler Based on GCC (GNAT)
Group: Development/Languages/Other
Autoreqprov: on
%description ada
This package contains an Ada95 compiler and associated development
tools based on the GNU GCC technology. Ada95 is the object oriented
successor of the Ada83 language. To build this package from source you
must have installed a binary version to bootstrap the compiler.
%package -n libada@base_ver@
License: GPL-2.0+
Summary: GNU Ada Runtime Libraries
Group: System/Libraries
Autoreqprov: on
Provides: libgnarl-4_3 = %{version}-%{release}
Obsoletes: libgnarl-4_3 < %{version}-%{release}
Provides: libgnat-4_3 = %{version}-%{release}
Obsoletes: libgnat-4_3 < %{version}-%{release}
%description -n libada@base_ver@
This package contains the shared libraries required to run programs
compiled with the GNU Ada compiler (GNAT) if they are compiled to use
shared libraries. It also contains the shared libraries for the
Implementation of the Ada Semantic Interface Specification (ASIS), the
implementation of Distributed Systems Programming (GLADE) and the Posix
1003.5 Binding (Florist).
%post -n libada@base_ver@
/sbin/ldconfig
%postun -n libada@base_ver@
/sbin/ldconfig
# PACKAGE-BEGIN
%package fortran@variant@
License: GPL-3.0+
Summary: The GNU Fortran Compiler and Support Files
Group: Development/Languages/Fortran
Autoreqprov: on
Requires: gcc@base_ver@ = %{version}-%{release}
Requires: libgfortran3@variant@ >= %{version}-%{release}
%description fortran@variant@
This is the Fortran compiler of the GNU Compiler Collection (GCC).
# PACKAGE-END
# PACKAGE-BEGIN
%package -n libgfortran@base_ver@@variant@
License: GPL-2.0+
Summary: The GNU Fortran Compiler Runtime Library
Group: Development/Languages/Fortran
Provides: libgfortran3@variant@ = %{version}-%{release}
Obsoletes: libgfortran3@variant@ < %{version}-%{release}
Autoreqprov: on
%description -n libgfortran@base_ver@@variant@
The runtime library needed to run programs compiled with the Fortran compiler
of the GNU Compiler Collection (GCC).
%post -n libgfortran@base_ver@@variant@
/sbin/ldconfig
%postun -n libgfortran@base_ver@@variant@
/sbin/ldconfig
# PACKAGE-END
# PACKAGE-BEGIN
%package -n libmudflap@base_ver@@variant@
License: GPL-2.0+
Summary: The Mudflap Extension Runtime Library
Group: Development/Languages/C and C++
Provides: libmudflap0@variant@ = %{version}-%{release}
Obsoletes: libmudflap0@variant@ < %{version}-%{release}
Provides: libmudflapth0@variant@ = %{version}-%{release}
Obsoletes: libmudflapth0@variant@ < %{version}-%{release}
# transitional
Provides: libmudflap@variant@ = %{version}-%{release}
Obsoletes: libmudflap@variant@ < %{version}-%{release}
# make rpm happy
Obsoletes: libmudflap41@variant@ libmudflap42@variant@
# make zypp happy
Provides: libmudflap41@variant@ libmudflap42@variant@
Autoreqprov: on
%description -n libmudflap@base_ver@@variant@
This is the Mudflap Extension Runtime Library.
%post -n libmudflap@base_ver@@variant@
/sbin/ldconfig
%postun -n libmudflap@base_ver@@variant@
/sbin/ldconfig
# PACKAGE-END
%package -n libgcj@base_ver@
# LIBJAVA-DELETE-END
License: GPL-2.0+ and LGPL-2.1+
Summary: Java Runtime Library for gcc
Group: System/Libraries
%define gcj_sover 9
%if 0%{suse_version} > 1000
Recommends: libgcj@base_ver@-jar = %{version}-%{release}
%endif
Provides: libgcj%{gcj_sover} = %{version}-%{release}
Obsoletes: libgcj%{gcj_sover} < %{version}-%{release}
Provides: libgij%{gcj_sover} = %{version}-%{release}
Obsoletes: libgij%{gcj_sover} < %{version}-%{release}
Provides: libgcj-tools%{gcj_sover} = %{version}-%{release}
Obsoletes: libgcj-tools%{gcj_sover} < %{version}-%{release}
Autoreqprov: on
%description -n libgcj@base_ver@
This library is needed if you want to use the GNU Java compiler, gcj.
Source code for this package is in gcc.
%post -n libgcj@base_ver@
/sbin/ldconfig
%postun -n libgcj@base_ver@
/sbin/ldconfig
%package -n gcc@base_ver@-java
License: GPL-3.0+
Summary: The GNU Java Compiler
Group: Development/Languages/Java
Autoreqprov: on
Requires: gcc@base_ver@ = %{version}
Requires: libgcj@base_ver@-devel = %{version}-%{release}
%description -n gcc@base_ver@-java
The Java compiler from the GCC-tools-suite.
%package -n libgcj_bc@base_ver@
License: GPL-2.0+ and LGPL-2.1+
Summary: Fake library for BC-ABI compatibility.
Group: Development/Libraries/Java
Autoreqprov: on
Provides: libgcj_bc1 = %{version}-%{release}
Obsoletes: libgcj_bc1 < %{version}-%{release}
# libgcj_bc is special in that it just contains a symlink to
# a proper libgcj version. So require that library and add
# provides for the shlib version as created at link time
Requires: libgcj%{gcj_sover}
%ifarch x86_64 ia64 ppc64 s390x
Provides: libgcj_bc.so.1()(64bit)
%else
Provides: libgcj_bc.so.1
%endif
# make rpm happy
Obsoletes: libgcj_bc42
# make zypp happy
Provides: libgcj_bc42
%description -n libgcj_bc@base_ver@
A fake library that is used at link time only. It ensures that
binaries built with the BC-ABI link against a constant SONAME.
This way, BC-ABI binaries continue to work if the SONAME underlying
libgcj.so changes.
%package -n libgcj@base_ver@-jar
License: GPL-2.0+ and LGPL-2.1+
Summary: Java runtime library (jar files).
Group: Development/Libraries/Java
%description -n libgcj@base_ver@-jar
These are the jar files that go along with the gcj front end to gcc.
%package -n libgcj@base_ver@-devel
License: GPL-2.0+ and LGPL-2.1+
Summary: Include Files and Libraries mandatory for Development.
Group: Development/Libraries/Java
Autoreqprov: on
Requires: libstdc++@base_ver@-devel = %{version}
Requires: libgcj%{gcj_sover} >= %{version}-%{release}
Requires: libgcj_bc1 >= %{version}-%{release}
Requires: libgcj@base_ver@-jar = %{version}-%{release}
Requires: gtk2-devel
Requires: libart_lgpl-devel
Requires: glibc-devel
Requires: zlib-devel
%ifarch ia64
Requires: libunwind-devel
%endif
%description -n libgcj@base_ver@-devel
This package contains all necessary include files and libraries needed
to develop applications that require these.
%package -n gcc@base_ver@-gij
License: GPL-3.0+
Summary: Java Bytecode Interpreter for gcc
Group: Development/Libraries/Java
Requires: libgcj%{gcj_sover} >= %{version}-%{release}
Autoreqprov: on
%description -n gcc@base_ver@-gij
This package contains the java bytecode interpreter gij and related tools.
# LIBFFI-DELETE-END
# PACKAGE-BEGIN
%package -n libffi@base_ver@@variant@
License: BSD-3-Clause
Summary: Foreign Function Interface library
Group: Development/Languages/C and C++
Autoreqprov: on
Provides: g-wrap:/usr/lib/libffi.so.4
Provides: libffi4 = %{version}-%{release}
Obsoletes: libffi4 < %{version}-%{release}
# make rpm happy
Obsoletes: libffi41@variant@ libffi42@variant@
# make zypp happy
Provides: libffi41@variant@ libffi42@variant@
%description -n libffi@base_ver@@variant@
A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language.
%post -n libffi@base_ver@@variant@
/sbin/ldconfig
%postun -n libffi@base_ver@@variant@
/sbin/ldconfig
# PACKAGE-END
# PACKAGE-BEGIN
%package -n libffi@base_ver@-devel@variant@
Summary: Foreign Function Interface library development files
Group: Development/Languages/C and C++
Autoreqprov: on
Requires: libffi@base_ver@@variant@ >= %{version}-%{release}
%description -n libffi@base_ver@-devel@variant@
A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language.
# PACKAGE-END
%package -n gcc@base_ver@-testresults
License: SUSE-Public-Domain
Summary: Testsuite results
Group: Development/Languages/C and C++
%description -n gcc@base_ver@-testresults
Results from running the gcc and target library testsuites.
# COMMON-BEGIN
# Define the canonical target and host architecture
# %gcc_target_arch is supposed to be the full target triple
# %TARGET_ARCH is the canonicalized CPU part
# %CONFIGURE_TARGET is the target triple used for --target=
%if 0%{?gcc_target_arch:1}
%define CONFIGURE_TARGET %{gcc_target_arch}
%define TARGET_ARCH %(echo %{gcc_target_arch} | cut -d - -f 1 | sed -e "s/i.86/i586/;s/ppc/powerpc/")
%if 0%{?gcc_icecream:1} && %{TARGET_ARCH} == "powerpc"
%define CONFIGURE_TARGET powerpc64-linux
%endif
%if 0%{?gcc_icecream:1} && %{TARGET_ARCH} == "powerpc64"
%define CONFIGURE_TARGET powerpc64-linux
%endif
%if 0%{?gcc_icecream:1} && %{TARGET_ARCH} == "i586"
%define CONFIGURE_TARGET i586-linux
%endif
%else
%define TARGET_ARCH %(echo %{_target_cpu} | sed -e "s/i.86/i586/;s/ppc/powerpc/")
%endif
%define HOST_ARCH %(echo %{_host_cpu} | sed -e "s/i.86/i586/;s/ppc/powerpc/")
%define biarch %(case " %{biarch_targets} " in (*" %{TARGET_ARCH} "*) echo 1;; (*) echo 0;; esac)
%ifarch ppc
%define GCCDIST powerpc64-suse-linux
%else
%define GCCDIST %{HOST_ARCH}-suse-linux
%endif
%define libsubdir %{_libdir}/gcc/%{GCCDIST}/%{gcc_dir_version}
%define gxxinclude %{_prefix}/include/c++/%{gcc_dir_version}
# COMMON-END
# Versionspecific directories
%define versmainlibdir %{libsubdir}
%define versmainlibdirbi32 %{libsubdir}/32
%define versmainlibdirbi64 %{libsubdir}/64
%ifarch ppc
%define versnoflibdir %{libsubdir}/nof
%define versmainlibdirbi32 %{libsubdir}
%define versmainlibdirbi64 %{libsubdir}/64
%endif
%ifarch ppc64
%define versnoflibdir %{libsubdir}/32/nof
%endif
%if %{build_primary_64bit}
%define versmainlibdirbi %{versmainlibdirbi32}
%else
%define versmainlibdirbi %{versmainlibdirbi64}
%endif
%define mainlibdir %{_libdir}
%define mainlibdirbi32 %{_prefix}/lib
%define mainlibdirbi64 %{_prefix}/lib64
%define noflibdir %{_prefix}/lib/nof
%if %{build_primary_64bit}
%define mainlibdirbi %{mainlibdirbi32}
%else
%define mainlibdirbi %{mainlibdirbi64}
%endif
# Now define a few macros that make it easy to package libs and
# related files just to the right package, without caring for the
# exact path the files are in.
# %mainlib package X from all dirs that belong to the main package
# %biarchlib package X from all dirs that belong to the -32/64bit package
# by default, nof libs go where the 32bit libs go.
%if %{build_nof}
%define mainlib() %{mainlibdir}/%1\
%{noflibdir}/%1\
%{nil}
%else
%define mainlib() %{mainlibdir}/%1\
%{nil}
%endif
%define biarchlib() %{nil}
%if %{biarch}
%if !%{separate_biarch}
%if %{build_nof}
%define mainlib() %{mainlibdir}/%1\
%{mainlibdirbi}/%1\
%{noflibdir}/%1\
%{nil}
%else
%define mainlib() %{mainlibdir}/%1\
%{mainlibdirbi}/%1\
%{nil}
%endif
%else
%if %{build_nof}
%define biarchlib() %{mainlibdirbi}/%1\
%{noflibdir}/%1\
%{nil}
%define mainlib() %{mainlibdir}/%1\
%{nil}
%else
%define biarchlib() %{mainlibdirbi}/%1\
%{nil}
%endif
%endif
%endif
%if %{build_nof}
%define versmainlib() %{versmainlibdir}/%1\
%{versnoflibdir}/%1\
%{nil}
%else
%define versmainlib() %{versmainlibdir}/%1\
%{nil}
%endif
%define versbiarchlib() %{nil}
%if %{biarch}
%if !%{separate_biarch}
%if %{build_nof}
%define versmainlib() %{versmainlibdir}/%1\
%{versmainlibdirbi}/%1\
%{versnoflibdir}/%1\
%{nil}
%else
%define versmainlib() %{versmainlibdir}/%1\
%{versmainlibdirbi}/%1\
%{nil}
%endif
%else
%if %{build_nof}
%define versbiarchlib() %{versmainlibdirbi}/%1\
%{versnoflibdir}/%1\
%{nil}
%define versmainlib() %{versmainlibdir}/%1\
%{nil}
%else
%define versbiarchlib() %{versmainlibdirbi}/%1\
%{nil}
%endif
%endif
%endif
# COMMON-BEGIN
%prep
%setup -q -n gcc-%{gcc_version}%{snapshot_date}
%patch1
# This patch changes the version string reported by GCC from
# gcc (SUSE Linux) 4.3.2 20080806 (prerelease) [gcc-4_3-branch revision 138797]
# to
# gcc (SUSE Linux) 4.3.1 [gcc-4_3-branch revision 138797]
# as requested by bnc#363219.
%patch2
%patch3
%patch4
%patch5
%if 0%{suse_version} > 1100
%patch6
%endif
%patch7
%patch10
%patch11
%if !%{build_nof}
%patch12
%endif
%patch22
%patch23
%patch24
%patch25
%patch28
%patch29
%patch30
%patch31
%patch32
%patch33
%patch41
%patch42
%if 0%{suse_version} > 1100
%patch43
%endif
%patch44
%patch45
%patch46
%patch47
%patch48
%patch202
%patch204
%patch205
%patch206
%patch207 -p1
%patch208
%patch209
%patch210
%patch211
%patch212
%patch213 -p1
%patch50
%patch51
%patch52
%patch53
%patch54
%patch55
%patch56
%patch57
%patch58
%patch59
%patch60
%patch61
%patch70
%patch71
%patch72
%patch73
%patch74 -p1
%patch75
%patch76
%patch77
%patch78
%patch79
%patch81
%patch82
%patch80
%patch90
%patch91
%patch92
%patch93
%patch94
%patch95
%patch96
%patch97
%patch99
%patch100
%patch101
%patch102
%patch103
%patch104 -p1
%patch105 -p1
%patch106
%patch109
%patch110
%patch111
%patch112
%patch114
%patch115
%patch116
%patch117
%patch118
%patch119
%patch120
%patch121
%patch122
%patch123
%patch124 -p1
%patch126
%patch127
%patch128
%patch1281
%patch129
%patch130
%patch131
%patch132
%patch133
%patch134
%patch140 -p1
%patch141
%patch142
%patch143
%patch144
%patch145
%patch146
%patch147
%patch148
%patch149
%patch150
%patch151
%patch152
%patch160 -p1
%patch162 -p1
%patch163 -p1
%patch164 -p1
%patch165 -p1
%patch166
%patch167
%patch170
%patch171
%patch172
%patch173
%patch174
%patch175
%patch176
%patch177
%patch178
%patch179
%patch180
%patch181
%patch182
%patch183
%patch184
%patch185
%patch187
%patch188
%patch189
%patch190
%patch191
%patch192
%patch193
%patch194
%patch195
%patch196
%patch197
%patch198
%patch199
%patch200 -p1
%build
# Avoid rebuilding of generated files
contrib/gcc_update --touch
# Split version file into version used for directories (X.Y) and
# version to report with --version (X.Y.Z).
# See also gcc-dir-version.patch.
# Also decrement the patchlevel version by one
if test `cat gcc/DEV-PHASE` == "prerelease"; then
( cat gcc/BASE-VER | cut -d '.' -f 1-2 | tr -d '\n'; echo -n .; cat gcc/BASE-VER | cut -d '.' -f 3 | tr '0123456789' '0012345678' ) > gcc/FULL-VER
else
mv gcc/BASE-VER gcc/FULL-VER
fi
cat gcc/FULL-VER | cut -d '.' -f 1-2 > gcc/BASE-VER
rm -rf obj-%{GCCDIST}
mkdir obj-%{GCCDIST}
cd obj-%{GCCDIST}
RPM_OPT_FLAGS="$RPM_OPT_FLAGS -U_FORTIFY_SOURCE"
RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS|sed -e 's/-fno-rtti//g' -e 's/-fno-exceptions//g' -e 's/-Wmissing-format-attribute//g' -e 's/-fstack-protector//g' -e 's/-ffortify=.//g' -e 's/-Wall//g' -e 's/-m32//g' -e 's/-m64//g'`
%ifarch %ix86
# -mcpu is superceded by -mtune but -mtune is not supported by
# our bootstrap compiler. -mcpu gives a warning that stops
# the build process, so remove it for now.
RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS|sed -e 's/-mcpu=i.86//g'`
%endif
%ifarch s390 s390x
RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS|sed -e 's/-fsigned-char//g'`
RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS|sed -e 's/-O1/-O2/g'`
%endif
%if 0%{?gcc_target_arch:1} && 0%{!?gcc_icecream:1}
# Kill all -march/tune/cpu because that screws building the target libs
RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS|sed -e 's/-m\(arch\|tune\|cpu\)=[^ ]*//g'`
%endif
# Replace 2 spaces by one finally
RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS|sed -e 's/ / /g'`
languages=c
%if %{build_cp}
languages=$languages,c++
%endif
%if %{build_objc}
languages=$languages,objc
%endif
%if %{build_fortran}
languages=$languages,fortran
%endif
%if %{build_objcp}
languages=$languages,obj-c++
%endif
%if %{build_java}
languages=$languages,java
%endif
%if %{build_ada}
languages=$languages,ada
%endif
J=%{?jobs:%jobs}
if test -z "$J"; then
J=$(getconf _NPROCESSORS_CONF)
JL=$(($J * 2))
else
test 1 -gt "$J" && J=1
JL=$(($(getconf _NPROCESSORS_CONF)*2))
fi
if test "$J" == "0"; then
J=1
fi
if test "$JL" == "0"; then
JL=1
fi
PARALLEL="-j$J -l$JL"
# we don't want some miscompiles in the testsuite, or some fault in
# the compiler to kill the machine. Hence we limit the amount of memory
# by the physical RAM plus half of swap
#MEM=$(free -m | awk '/^Mem:/ {print $2}')
#SWAP=$(free -m | awk '/^Swap:/ {print $2}')
#ulimit -v $(((MEM + SWAP/2)*1024))
# In general we want to ship release checking enabled compilers
# and run BETA with checking enabled.
#ENABLE_CHECKING="--enable-checking=yes"
ENABLE_CHECKING="--enable-checking=release"
%if "%{name}" != "gcc@base_ver@"
export PATH=/opt/cross/bin:$PATH
%endif
# Work around tail/head -1 changes
export _POSIX2_VERSION=199209
# -Wl,-as-needed breaks the libgcj setup
export SUSE_ASNEEDED=0
# configure tries to parse include/features.h to detect
# if glibc supports SSP. When cross compiling we would need
# to install a cross glibc, which we don't, or make the whole
# thing point to the native glibc, which is in /, hence the
# --with-sysroot=/
%if %{build_ada}
# Using the host gnatmake like
# CC="gcc%{hostsuffix}" GNATBIND="gnatbind%{hostsuffix}"
# GNATMAKE="gnatmake%{hostsuffix}"
# doesn't work due to PR33857, so an un-suffixed gnatmake has to be
# available
mkdir -p host-tools/bin
cp -a /usr/bin/gnatmake%{hostsuffix} host-tools/bin/gnatmake
cp -a /usr/bin/gnatlink%{hostsuffix} host-tools/bin/gnatlink
cp -a /usr/bin/gnatbind%{hostsuffix} host-tools/bin/gnatbind
cp -a /usr/bin/gcc%{hostsuffix} host-tools/bin/gcc
ln -sf /usr/%{_lib} host-tools/%{_lib}
export PATH="`pwd`/host-tools/bin:$PATH"
%endif
#%if 0%{?gcc_target_arch:1} && 0%{!?gcc_icecream:1}
#%else
# --enable-threads=posix \
#%endif
# --enable-shared \
CFLAGS="$RPM_OPT_FLAGS" CXXFLAGS="$RPM_OPT_FLAGS" XCFLAGS="$RPM_OPT_FLAGS" \
TCFLAGS="$RPM_OPT_FLAGS" GCJFLAGS="$RPM_OPT_FLAGS" \
../configure \
--prefix=%{_prefix} \
--infodir=%{_infodir} \
--mandir=%{_mandir} \
--libdir=%{_libdir} \
--libexecdir=%{_libdir} \
--enable-languages=$languages \
$ENABLE_CHECKING \
--with-gxx-include-dir=%{_prefix}/include/c++/%{gcc_dir_version} \
--enable-ssp \
--disable-libssp \
--with-bugurl="http://bugs.opensuse.org/" \
--with-pkgversion="SUSE Linux" \
%if !%{build_libjava}
--disable-libgcj \
%else
--with-java-home=%{_libdir}/jvm/java-1.5.0-gcj%{binsuffix}-1.5.0.0/jre \
--with-ecj-jar=%{libsubdir}/ecj.jar \
--enable-java-awt=gtk \
--enable-gtk-cairo \
%if !%{biarch_libjava}
--disable-libjava-multilib \
%endif
%endif
%if !%{build_with_mudflap}
--disable-libmudflap \
%endif
--with-slibdir=/%{_lib} \
--with-system-zlib \
--enable-__cxa_atexit \
--enable-libstdcxx-allocator=new \
--disable-libstdcxx-pch \
--enable-version-specific-runtime-libs \
%if 0%{?gcc_target_arch:1}
%if 0%{?gcc_icecream:1}
--with-as=/opt/cross/%{TARGET_ARCH}-linux/bin/as \
--with-ld=/opt/cross/%{TARGET_ARCH}-linux/bin/ld \
--with-sysroot=/ \
--enable-linux-futex \
%endif
%if 0%{?build_static:1}
--disable-shared \
%endif
%if "%{TARGET_ARCH}" == "spu"
--with-sysroot=/usr/spu \
--with-gxx-include-dir=%{_prefix}/spu/include/c++/%{gcc_dir_version} \
--with-newlib \
%endif
--disable-nls \
--target=%{CONFIGURE_TARGET} \
%else
--program-suffix=%{binsuffix} \
--enable-linux-futex \
%ifarch ia64
--with-system-libunwind \
%else
--without-system-libunwind \
%endif
%endif
%if "%{TARGET_ARCH}" == "powerpc"
--with-cpu=default32 \
--enable-secureplt \
--with-long-double-128 \
%endif
%if "%{TARGET_ARCH}" == "powerpc64"
--with-cpu=power4 \
--enable-secureplt \
--with-long-double-128 \
%endif
%if "%{TARGET_ARCH}" == "i586"
--with-cpu=generic \
%endif
%if "%{TARGET_ARCH}" == "x86_64"
--with-cpu=generic \
%endif
%if "%{TARGET_ARCH}" == "s390"
--with-tune=z9-109 --with-arch=z900 \
--with-long-double-128 \
--enable-decimal-float \
%endif
%if "%{TARGET_ARCH}" == "s390x"
--with-tune=z9-109 --with-arch=z900 \
--with-long-double-128 \
--enable-decimal-float \
%endif
--build=%{GCCDIST}
# COMMON-END
%if 0%{?building_libffi:1}
make all-target-libffi $PARALLEL
%else
# Only run profiled bootstrap on archs where it works
#%ifarch %ix86 x86_64 ppc ppc64 ia64
#%ifarch %ix86 x86_64 ia64 s390 s390x
#make profiledbootstrap-lean BOOT_CFLAGS="$RPM_OPT_FLAGS" $PARALLEL
#%else
make bootstrap-lean BOOT_CFLAGS="$RPM_OPT_FLAGS" $PARALLEL
#%endif
#make -C gcc proto
make info
%if %{run_tests}
echo "Run testsuite"
(make -C %{GCCDIST}/libstdc++-v3 check-abi || true)
mv %{GCCDIST}/libstdc++-v3/testsuite/libstdc++.log %{GCCDIST}/libstdc++-v3/testsuite/libstdc++-abi.log
mv %{GCCDIST}/libstdc++-v3/testsuite/libstdc++.sum %{GCCDIST}/libstdc++-v3/testsuite/libstdc++-abi.sum
make -k check $PARALLEL || true
mkdir ../testresults
../contrib/test_summary > ../testresults/test_summary.txt
%endif
%endif
%install
export NO_BRP_CHECK_BYTECODE_VERSION=true
cd obj-%{GCCDIST}
# Work around tail/head -1 changes
export _POSIX2_VERSION=199209
export LIBRARY_PATH=$RPM_BUILD_ROOT%{libsubdir}:$RPM_BUILD_ROOT%{mainlibdirbi}
%if 0%{?building_libffi:1}
make -C %{GCCDIST}/libffi install DESTDIR=$RPM_BUILD_ROOT
%else
%if 0%{?building_libjava:1}
make -C %{GCCDIST}/libjava install DESTDIR=$RPM_BUILD_ROOT
make -C gcc java.install-man DESTDIR=$RPM_BUILD_ROOT
make -C gcc java.install-common DESTDIR=$RPM_BUILD_ROOT
make -C gcc install-common DESTDIR=$RPM_BUILD_ROOT COMPILERS='jc1$(exeext) jvgenmain$(exeext)'
# install-common also installs collect2, gcov and the g++ and gfortran driver
%if %{build_cp}
rm $RPM_BUILD_ROOT%{_prefix}/bin/g++%{binsuffix}
%endif
%if %{build_fortran}
rm $RPM_BUILD_ROOT%{_prefix}/bin/gfortran%{binsuffix}
%endif
rm $RPM_BUILD_ROOT%{_prefix}/bin/gcov%{binsuffix}
rm $RPM_BUILD_ROOT%{libsubdir}/collect2
%else
make install DESTDIR=$RPM_BUILD_ROOT
%if %{build_java}
make -C gcc java.uninstall DESTDIR=$RPM_BUILD_ROOT
make -C gcc java.install-info DESTDIR=$RPM_BUILD_ROOT
rm $RPM_BUILD_ROOT%{_prefix}/bin/jcf-dump%{binsuffix}
rm $RPM_BUILD_ROOT%{_mandir}/man1/jcf-dump%{binsuffix}.1
rm $RPM_BUILD_ROOT%{libsubdir}/jc1
rm $RPM_BUILD_ROOT%{libsubdir}/jvgenmain
%endif
%endif
%endif
# Remove some useless .la files
for lib in libobjc libgfortran libgfortranbegin libmudflap libmudflapth \
libgomp libstdc++ libsupc++ libgcj-tools libgij; do
rm -f $RPM_BUILD_ROOT%{versmainlibdir}/$lib.la
%if %{biarch}
rm -f $RPM_BUILD_ROOT%{versmainlibdirbi}/$lib.la
%endif
done
mkdir -p $RPM_BUILD_ROOT%{_libdir}
%if %{biarch}
%if %{build_primary_64bit}
mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib
%else
mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib64
%endif
%endif
# LIBFFI-DELETE-BEGIN
# LIBJAVA-DELETE-BEGIN
%if %{build_cp}
# Merge multilib c++config.h to allow omitting the duplicate and
# identical other arch specific headers
dir_ml=
cxxconfig="`find %{GCCDIST}/libstdc++-v3/include -name c++config.h`"
for i in `find %{GCCDIST}/[36]*/libstdc++-v3/include -name c++config.h 2>/dev/null`; do
if ! diff -up $cxxconfig $i; then
file_32=x
file_64=x
case $i in
%{GCCDIST}/32/*)
file_32=$i
file_64=$cxxconfig
dir_ml=32
;;
%{GCCDIST}/64/*)
file_32=$cxxconfig
file_64=$i
dir_ml=64
;;
esac
if ! ( test -f "$file_32" && test -f "$file_64" ); then
echo "Urgs?"
exit 1
fi
cat > $RPM_BUILD_ROOT%{_prefix}/include/c++/%{gcc_dir_version}/%{GCCDIST}/bits/c++config.h <<EOF
#ifndef _CPP_CPPCONFIG_WRAPPER
#define _CPP_CPPCONFIG_WRAPPER 1
#include <bits/wordsize.h>
#if __WORDSIZE == 32
`cat $file_32`
#else
`cat $file_64`
#endif
#endif
EOF
break
fi
done
rm -rf $RPM_BUILD_ROOT%{_prefix}/include/c++/%{gcc_dir_version}/%{GCCDIST}/[36]*
if ! test -z "$dir_ml"; then
ln -s . $RPM_BUILD_ROOT%{_prefix}/include/c++/%{gcc_dir_version}/%{GCCDIST}/$dir_ml
fi
%endif
# LIBJAVA-DELETE-END
# move shared libs from versionspecific dir to main libdir
for libname in \
%if 0%{?building_libjava:1}
libgcj libgij libgcj-tools \
%else
%if %{build_fortran}
libgfortran \
%endif
%if %{build_objc}
libobjc \
%endif
%if %{build_cp}
libstdc++ \
%endif
libgomp \
%if %{build_with_mudflap}
libmudflap libmudflapth \
%endif
%endif
; do
for lib in `find $RPM_BUILD_ROOT%{versmainlibdir} -maxdepth 1 -name $libname.so.*`; do
mv $lib $RPM_BUILD_ROOT%{mainlibdir}/
done
ln -sf %{mainlibdir}/`readlink $RPM_BUILD_ROOT%{versmainlibdir}/$libname.so | sed -e 's/\(.*\.so\.[^\.]*\).*/\1/'` \
$RPM_BUILD_ROOT%{versmainlibdir}/$libname.so
%if %{biarch}
if test -d $RPM_BUILD_ROOT%{versmainlibdirbi}; then
for lib in `find $RPM_BUILD_ROOT%{versmainlibdirbi} -maxdepth 1 -name "$libname.so.*"`; do
mv $lib $RPM_BUILD_ROOT%{mainlibdirbi}/
done
ln -sf %{mainlibdirbi}/`readlink $RPM_BUILD_ROOT%{versmainlibdirbi}/$libname.so | sed -e 's/\(.*\.so\.[^\.]*\).*/\1/'` \
$RPM_BUILD_ROOT%{versmainlibdirbi}/$libname.so
fi
%endif
done
%if 0%{?building_libjava:1}
# libgcj_bc is special as the .so file is actually a different
# library as the library refered to by the SONAME which should
# be a simple link to our libgcj.
for lib in `find $RPM_BUILD_ROOT%{versmainlibdir} -maxdepth 1 -name libgcj_bc.so.*`; do
rm $lib
done
ln -s libgcj.so.%{gcj_sover} $RPM_BUILD_ROOT%{mainlibdir}/libgcj_bc.so.1
%if %{biarch_libjava}
for lib in `find $RPM_BUILD_ROOT%{versmainlibdirbi} -maxdepth 1 -name libgcj_bc.so.*`; do
rm $lib
done
ln -s libgcj.so.%{gcj_sover} $RPM_BUILD_ROOT%{mainlibdirbi}/libgcj_bc.so.1
%endif
%endif
# LIBJAVA-DELETE-BEGIN
# Move libgcc_s around
rm -f $RPM_BUILD_ROOT/%{_lib}/libgcc_s.so
ln -sf /%{_lib}/libgcc_s.so.%{libgcc_s} $RPM_BUILD_ROOT%{versmainlibdir}/libgcc_s.so
chmod a+x $RPM_BUILD_ROOT/%{_lib}/libgcc_s.so.%{libgcc_s}
%if %{biarch}
%if %{build_primary_64bit}
rm -f $RPM_BUILD_ROOT/lib/libgcc_s.so
ln -sf /lib/libgcc_s.so.%{libgcc_s} $RPM_BUILD_ROOT%{versmainlibdirbi32}/libgcc_s.so
ln -sf /lib/libgcc_s.so.%{libgcc_s} $RPM_BUILD_ROOT%{versmainlibdirbi32}/libgcc_s_32.so
chmod a+x $RPM_BUILD_ROOT/lib/libgcc_s.so.%{libgcc_s}
%else
# 32-bit biarch systems
rm -f $RPM_BUILD_ROOT/lib64/libgcc_s.so
ln -sf /lib64/libgcc_s.so.%{libgcc_s} $RPM_BUILD_ROOT%{versmainlibdirbi64}/libgcc_s.so
ln -sf /lib64/libgcc_s.so.%{libgcc_s} $RPM_BUILD_ROOT%{versmainlibdirbi64}/libgcc_s_64.so
chmod a+x $RPM_BUILD_ROOT/lib64/libgcc_s.so.%{libgcc_s}
%endif
%endif
# LIBJAVA-DELETE-END
# LIBFFI-DELETE-END
%if %{build_ada}
mv $RPM_BUILD_ROOT%{libsubdir}/adalib/lib*-*.so $RPM_BUILD_ROOT%{_libdir}
ln -sf %{_libdir}/$(cd $RPM_BUILD_ROOT%{_libdir} && echo libgnarl-*.so) $RPM_BUILD_ROOT%{libsubdir}/adalib/libgnarl.so
ln -sf %{_libdir}/$(cd $RPM_BUILD_ROOT%{_libdir} && echo libgnat-*.so) $RPM_BUILD_ROOT%{libsubdir}/adalib/libgnat.so
chmod a+x $RPM_BUILD_ROOT%{_libdir}/libgna*-*.so
%endif
rm -f $RPM_BUILD_ROOT%{_prefix}/bin/c++%{binsuffix}
# Remove some crap from the .la files:
for l in `find $RPM_BUILD_ROOT -name '*.la'`; do
echo "changing $l"
# -e '/^dependency_libs/s|%{libsubdir}/\([^.]*\)\.la |%{_libdir}/\1\.la |g'
sed -e '/^dependency_libs/s| -L%{_builddir}/[^ ]*||g' \
-e '/^dependency_libs/s| -L/usr/%{GCCDIST}/bin||g' \
-e '/^dependency_libs/s|-lm \(-lm \)*|-lm |' \
-e '/^dependency_libs/s|-L[^ ]* ||g' \
%if %{biarch}
%if %{build_primary_64bit}
-e '/^libdir/s|%{_libdir}/32|%{_prefix}/lib|' \
-e '/^libdir/s|lib64/\.\./||' \
%else
-e '/^libdir/s|%{_libdir}/64|%{_prefix}/lib64|' \
%endif
%endif
< $l > $l.new
mv $l.new $l
done
%if %{run_tests}
cp `find . -name "*.sum"` ../testresults/
cp `find . -name "*.log" \! -name "config.log" |grep -v 'acats/tests' ` ../testresults/
chmod 644 ../testresults/*
%endif
# LIBFFI-DELETE-BEGIN
%if %{build_cp}
# Find C++ and Java headers
find $RPM_BUILD_ROOT%{_prefix}/include/c++ \
-regex ".*/\(org\|gcj\|gnu\|java\|javax\)" -prune \
-o \( -type d -printf "%%%%dir " , \
-printf "%{_prefix}/include/c++/%%P\n" \) > ../c++-headers
%endif
# LIBFFI-DELETE-END
# Remove files that we do not need to clean up filelist
rm -f $RPM_BUILD_ROOT%{_prefix}/bin/%{GCCDIST}-*
rm -rf $RPM_BUILD_ROOT%{libsubdir}/install-tools
rm -rf $RPM_BUILD_ROOT%{libsubdir}/install-tools
#rm -rf $RPM_BUILD_ROOT%{_libdir}/pkgconfig/libgcj%{binsuffix}.pc
rm -rf $RPM_BUILD_ROOT%{libsubdir}/include-fixed/root
rm -f $RPM_BUILD_ROOT%{libsubdir}/include-fixed/curses.h
rm -rf $RPM_BUILD_ROOT%{libsubdir}/include-fixed/asm-*
rm -rf $RPM_BUILD_ROOT%{libsubdir}/include-fixed/linux
rm -rf $RPM_BUILD_ROOT%{libsubdir}/include-fixed/sound
rm -rf $RPM_BUILD_ROOT%{libsubdir}/include-fixed/features.h
rm -f $RPM_BUILD_ROOT%{libsubdir}/include-fixed/ncurses.h
rm -f $RPM_BUILD_ROOT%{libsubdir}/include-fixed/stdio.h
rm -f $RPM_BUILD_ROOT%{libsubdir}/include-fixed/zutil.h
rm -rf $RPM_BUILD_ROOT%{libsubdir}/include-fixed/X11
rm -rf $RPM_BUILD_ROOT%{libsubdir}/include-fixed/bits
rm -f $RPM_BUILD_ROOT%{libsubdir}/include-fixed/obstack.h
rm -f $RPM_BUILD_ROOT%{libsubdir}/include-fixed/spe.h
rm -rf $RPM_BUILD_ROOT%{libsubdir}/include-fixed/bits
rm -rf $RPM_BUILD_ROOT%{libsubdir}/include-fixed/sys
rm -f $RPM_BUILD_ROOT%{_infodir}/dir
rm -f $RPM_BUILD_ROOT%{_prefix}/bin/gccbug%{binsuffix}
%if !0%{?building_libjava:1}%{?building_libffi:1}
# delete compile flag tracking from crt files
crt_list=$RPM_BUILD_ROOT%{versmainlibdir}/crt*.o
%if %{biarch}
%if %{build_primary_64bit}
crt32_list=$RPM_BUILD_ROOT%{versmainlibdirbi32}/crt*.o
%else
crt64_list=$RPM_BUILD_ROOT%{versmainlibdirbi64}/crt*.o
%endif
%endif
for o in $crt_list $crt32_list $crt64_list; do
objcopy -R ".comment.SUSE.OPTs" $o
done
%endif
%if 0%{?building_libjava:1}
# gcj -static doesn't work properly anyway, unless using --whole-archive
# let's save the space instead.
find $RPM_BUILD_ROOT -name libgcj.a \
-o -name libgcj-tools.a \
-o -name libgij.a \
-o -name libgtkpeer.a \
-o -name libjawt.a \
-o -name libjvm.a \
-o -name libgcj_bc.a \
| xargs rm -f
find $RPM_BUILD_ROOT -name libgcj.spec | xargs \
sed -i -e 's/lib: /&%%{static:%%eJava programs cannot be linked statically}/'
# security files have broken install locations, also they cause conflicts
# between libgcj versions. Simply delete them here, libgcj will use its
# defaults in this case (which is what these files contain anyway).
rm $RPM_BUILD_ROOT%{_libdir}/logging.properties
rm -r $RPM_BUILD_ROOT%{_libdir}/security
%endif
%if 0%{?building_libffi:1}
# Move libffi headers, remove empty libffi libtool file
mkdir -p $RPM_BUILD_ROOT%{_prefix}/include
mv $RPM_BUILD_ROOT%{libsubdir}/include/ffitarget.h $RPM_BUILD_ROOT%{_prefix}/include/
mv $RPM_BUILD_ROOT%{libsubdir}/include/ffi.h $RPM_BUILD_ROOT%{_prefix}/include/
rm -f $RPM_BUILD_ROOT%{mainlibdir}/libffi.la
%if %{biarch}
rm -f $RPM_BUILD_ROOT%{mainlibdirbi}/libffi.la
%endif
%endif
%if %{build_java}
%if !%{build_libjava}
rm $RPM_BUILD_ROOT%{_mandir}/man1/jv-convert%{binsuffix}.1
rm $RPM_BUILD_ROOT%{_mandir}/man1/gcj-dbtool%{binsuffix}.1
rm $RPM_BUILD_ROOT%{_mandir}/man1/gij%{binsuffix}.1
rm $RPM_BUILD_ROOT%{_mandir}/man1/grmic%{binsuffix}.1
rm $RPM_BUILD_ROOT%{_mandir}/man1/gc-analyze%{binsuffix}.1
%endif
%endif
rm -f $RPM_BUILD_ROOT%{_mandir}/man7/fsf-funding.7
rm -f $RPM_BUILD_ROOT%{_mandir}/man7/gfdl.7
rm -f $RPM_BUILD_ROOT%{_mandir}/man7/gpl.7
rm -f $RPM_BUILD_ROOT%{_libdir}/libiberty.a
%if %{build_nof}
rm -f $RPM_BUILD_ROOT%{_prefix}/lib/nof/libiberty.a
%endif
%if %{biarch}
%if %{build_primary_64bit}
rm -f $RPM_BUILD_ROOT%{_prefix}/lib/libiberty.a
%else
rm -f $RPM_BUILD_ROOT%{_prefix}/lib64/libiberty.a
%endif
%endif
# LIBFFI-DELETE-BEGIN
%if 0%{?building_libjava:1}
# For building libjava only we need to delete other info docs
rm $RPM_BUILD_ROOT%{_infodir}/cp-tools.info*
# For building the java frontend we need to copy the ecj jar
mkdir -p $RPM_BUILD_ROOT%{libsubdir}
cp $RPM_SOURCE_DIR/ecj.jar $RPM_BUILD_ROOT%{libsubdir}
%else
# For regular build, some info files do not get renamed properly.
# Do so here.
mv $RPM_BUILD_ROOT%{_infodir}/libgomp.info $RPM_BUILD_ROOT%{_infodir}/libgomp%{binsuffix}.info
%if %{build_ada}
mv $RPM_BUILD_ROOT%{_infodir}/gnat-style.info $RPM_BUILD_ROOT%{_infodir}/gnat-style%{binsuffix}.info
mv $RPM_BUILD_ROOT%{_infodir}/gnat_rm.info $RPM_BUILD_ROOT%{_infodir}/gnat_rm%{binsuffix}.info
mv $RPM_BUILD_ROOT%{_infodir}/gnat_ugn_unw.info $RPM_BUILD_ROOT%{_infodir}/gnat_ugn_unw%{binsuffix}.info
%endif
%endif
# LIBJAVA-DELETE-BEGIN
cd ..
%if 0%{suse_version} > 1000
%find_lang gcc@base_ver@-locale --all-name
%else
%find_lang cpplib%{binsuffix}
%find_lang gcc%{binsuffix}
%find_lang libstdc++
cat cpplib%{binsuffix}.lang gcc%{binsuffix}.lang libstdc++.lang \
> gcc@base_ver@-locale.lang
%endif
%post info
%install_info --info-dir=%{_infodir} %{_infodir}/cpp%{binsuffix}.info.gz
%install_info --info-dir=%{_infodir} %{_infodir}/cppinternals%{binsuffix}.info.gz
%install_info --info-dir=%{_infodir} %{_infodir}/gcc%{binsuffix}.info.gz
%install_info --info-dir=%{_infodir} %{_infodir}/gccint%{binsuffix}.info.gz
%install_info --info-dir=%{_infodir} %{_infodir}/gccinstall%{binsuffix}.info.gz
%install_info --info-dir=%{_infodir} %{_infodir}/libgomp%{binsuffix}.info.gz
%if %{build_fortran}
%install_info --info-dir=%{_infodir} %{_infodir}/gfortran%{binsuffix}.info.gz
%endif
%if %{build_java}
%install_info --info-dir=%{_infodir} %{_infodir}/gcj%{binsuffix}.info.gz
%endif
%if %{build_ada}
%install_info --info-dir=%{_infodir} %{_infodir}/gnat-style%{binsuffix}.info.gz
%install_info --info-dir=%{_infodir} %{_infodir}/gnat_rm%{binsuffix}.info.gz
%install_info --info-dir=%{_infodir} --section="GNU Ada tools" --entry="* GNAT User's Guide: (gnat_ug_unx). GNAT User's Guide for Unix Platforms" %{_infodir}/gnat_ug_unx%{binsuffix}.info.gz
%endif
%postun info
%install_info_delete --info-dir=%{_infodir} %{_infodir}/cpp%{binsuffix}.info.gz
%install_info_delete --info-dir=%{_infodir} %{_infodir}/cppinternals%{binsuffix}.info.gz
%install_info_delete --info-dir=%{_infodir} %{_infodir}/gcc%{binsuffix}.info.gz
%install_info_delete --info-dir=%{_infodir} %{_infodir}/gccint%{binsuffix}.info.gz
%install_info_delete --info-dir=%{_infodir} %{_infodir}/gccinstall%{binsuffix}.info.gz
%install_info_delete --info-dir=%{_infodir} %{_infodir}/libgomp%{binsuffix}.info.gz
%if %{build_fortran}
%install_info_delete --info-dir=%{_infodir} %{_infodir}/gfortran%{binsuffix}.info.gz
%endif
%if %{build_java}
%install_info_delete --info-dir=%{_infodir} %{_infodir}/gcj%{binsuffix}.info.gz
%endif
%if %{build_ada}
%install_info_delete --info-dir=%{_infodir} %{_infodir}/gnat-style%{binsuffix}.info.gz
%install_info_delete --info-dir=%{_infodir} %{_infodir}/gnat_rm%{binsuffix}.info.gz
%install_info_delete --info-dir=%{_infodir} %{_infodir}/gnat_ug_unx%{binsuffix}.info.gz
%endif
%files
%defattr(-,root,root)
%dir %{_libdir}/gcc
%dir %{_libdir}/gcc/%{GCCDIST}
%dir %{libsubdir}
%dir %{libsubdir}/include
%dir %{libsubdir}/include-fixed
%if %{biarch}
%if %{build_primary_64bit}
%dir %{libsubdir}/32
%else
%dir %{libsubdir}/64
%endif
%endif
%if %{build_nof}
%dir %{libsubdir}/nof
%endif
%{_prefix}/bin/gcc%{binsuffix}
%{_prefix}/bin/gcov%{binsuffix}
%{libsubdir}/collect2
%{libsubdir}/include-fixed/README
%{libsubdir}/include-fixed/limits.h
%{libsubdir}/include-fixed/syslimits.h
%if %{suse_version} < 1030
%{libsubdir}/include-fixed/wchar.h
%endif
%{libsubdir}/include/omp.h
%{libsubdir}/include/float.h
%{libsubdir}/include/iso646.h
%{libsubdir}/include/stdarg.h
%{libsubdir}/include/stdbool.h
%{libsubdir}/include/stdfix.h
%{libsubdir}/include/stddef.h
%{libsubdir}/include/uchar.h
%{libsubdir}/include/unwind.h
%{libsubdir}/include/varargs.h
%ifarch ppc ppc64
%{libsubdir}/include/altivec.h
%{libsubdir}/include/ppc-asm.h
%{libsubdir}/include/paired.h
%{libsubdir}/include/ppu_intrinsics.h
%{libsubdir}/include/si2vmx.h
%{libsubdir}/include/spe.h
%{libsubdir}/include/spu2vmx.h
%{libsubdir}/include/vec_types.h
%endif
%ifarch ia64
%{libsubdir}/include/ia64intrin.h
%endif
%ifarch %arm
%{libsubdir}/include/mmintrin.h
%endif
%ifarch %ix86 x86_64
%{libsubdir}/include/cpuid.h
%{libsubdir}/include/mm3dnow.h
%{libsubdir}/include/mmintrin.h
%{libsubdir}/include/mmintrin-common.h
%{libsubdir}/include/ammintrin.h
%{libsubdir}/include/bmmintrin.h
%{libsubdir}/include/emmintrin.h
%{libsubdir}/include/pmmintrin.h
%{libsubdir}/include/xmmintrin.h
%{libsubdir}/include/tmmintrin.h
%{libsubdir}/include/nmmintrin.h
%{libsubdir}/include/smmintrin.h
%{libsubdir}/include/wmmintrin.h
%{libsubdir}/include/mm_malloc.h
%endif
%if %{build_with_mudflap}
%{libsubdir}/include/mf-runtime.h
%endif
%versmainlib *crt*.o
%versmainlib libgcc*.a
%versmainlib libgcov.a
%versmainlib libgcc_s*.so
%if %{build_with_mudflap}
%versmainlib libmudflap.a
%versmainlib libmudflap.so
%versmainlib libmudflapth.a
%versmainlib libmudflapth.so
%endif
%versmainlib libgomp.so
%versmainlib libgomp.a
%versmainlib libgomp.spec
%doc %{_mandir}/man1/gcc%{binsuffix}.1.gz
%doc %{_mandir}/man1/gcov%{binsuffix}.1.gz
%if %{separate_biarch}
%files -n gcc@base_ver@%{separate_biarch_suffix}
%defattr(-,root,root)
%versbiarchlib *crt*.o
%versbiarchlib libgcc*.a
%versbiarchlib libgcov.a
%versbiarchlib libgcc_s*.so
%if %{build_with_mudflap}
%versbiarchlib libmudflap.a
%versbiarchlib libmudflap.so
%versbiarchlib libmudflapth.a
%versbiarchlib libmudflapth.so
%endif
%versbiarchlib libgomp.so
%versbiarchlib libgomp.a
%versbiarchlib libgomp.spec
%endif
%files locale -f gcc@base_ver@-locale.lang
%if %{build_cp}
%files c++
%defattr(-,root,root)
%dir %{_libdir}/gcc
%dir %{_libdir}/gcc/%{GCCDIST}
%dir %{libsubdir}
%{_prefix}/bin/g++%{binsuffix}
%doc %{_mandir}/man1/g++%{binsuffix}.1.gz
%{libsubdir}/cc1plus
%files -n libstdc++@base_ver@
%defattr(-,root,root)
%if %{build_nof}
%dir %{noflibdir}
%endif
%mainlib libstdc++.so.*
%if %{separate_biarch}
%files -n libstdc++@base_ver@%{separate_biarch_suffix}
%defattr(-,root,root)
%biarchlib libstdc++.so.*
%endif
%files -n libstdc++@base_ver@-devel -f c++-headers
%defattr(-,root,root)
%versmainlib libstdc++.a
%versmainlib libstdc++.so
%versmainlib libsupc++.a
%if %{separate_biarch}
%files -n libstdc++@base_ver@-devel%{separate_biarch_suffix}
%defattr(-,root,root)
%versbiarchlib libstdc++.a
%versbiarchlib libstdc++.so
%versbiarchlib libsupc++.a
%endif
%files -n libstdc++@base_ver@-doc
%defattr(-,root,root)
%doc libstdc++-v3/doc/html
%endif
%files -n libgcc@base_ver@
%defattr(-,root,root)
/%{_lib}/libgcc_s.so.%{libgcc_s}
%if %{build_nof}
%dir /lib/nof
/lib/nof/libgcc_s.so.%{libgcc_s}
%endif
%if %{biarch}
%if %{build_primary_64bit}
%if !%{separate_bi32}
/lib/libgcc_s.so.%{libgcc_s}
%endif
%else
%if !%{separate_bi64}
/lib64/libgcc_s.so.%{libgcc_s}
%endif
%endif
%endif
%if %{separate_bi64}
%files -n libgcc@base_ver@-64bit
%defattr(-,root,root)
/lib64/libgcc_s.so.%{libgcc_s}
%endif
%if %{separate_bi32}
%files -n libgcc@base_ver@-32bit
%defattr(-,root,root)
/lib/libgcc_s.so.%{libgcc_s}
%endif
%files -n libgomp@base_ver@
%defattr(-,root,root)
%mainlib libgomp.so.1*
%if %{separate_biarch}
%files -n libgomp@base_ver@%{separate_biarch_suffix}
%defattr(-,root,root)
%biarchlib libgomp.so.1*
%endif
%if %{build_fortran}
%files fortran
%defattr(-,root,root)
%dir %{libsubdir}/finclude
%{_prefix}/bin/gfortran%{binsuffix}
%{libsubdir}/f951
%{libsubdir}/finclude/*
%versmainlib libgfortran.a
%versmainlib libgfortran.so
%versmainlib libgfortranbegin.a
%doc %{_mandir}/man1/gfortran%{binsuffix}.1.gz
%if %{separate_biarch}
%files fortran%{separate_biarch_suffix}
%defattr(-,root,root)
%versbiarchlib libgfortran.a
%versbiarchlib libgfortran.so
%versbiarchlib libgfortranbegin.a
%endif
%files -n libgfortran@base_ver@
%defattr(-,root,root)
%mainlib libgfortran.so.*
%if %{separate_biarch}
%files -n libgfortran@base_ver@%{separate_biarch_suffix}
%defattr(-,root,root)
%biarchlib libgfortran.so.*
%endif
%endif
%if %{build_with_mudflap}
%files -n libmudflap@base_ver@
%defattr(-,root,root)
%mainlib libmudflap.so.0*
%mainlib libmudflapth.so.0*
%if %{separate_biarch}
%files -n libmudflap@base_ver@%{separate_biarch_suffix}
%defattr(-,root,root)
%biarchlib libmudflap.so.0*
%biarchlib libmudflapth.so.0*
%endif
%endif
%files info
%defattr(-,root,root)
%doc %{_infodir}/cpp%{binsuffix}.info*.gz
%doc %{_infodir}/cppinternals%{binsuffix}.info*.gz
%doc %{_infodir}/gcc%{binsuffix}.info*.gz
%doc %{_infodir}/gccint%{binsuffix}.info*.gz
%doc %{_infodir}/gccinstall%{binsuffix}.info*.gz
%doc %{_infodir}/libgomp%{binsuffix}.info*.gz
%if %{build_fortran}
%doc %{_infodir}/gfortran%{binsuffix}.info*.gz
%endif
%if %{build_java}
%doc %{_infodir}/gcj%{binsuffix}.info*.gz
%endif
%if %{build_ada}
%doc %{_infodir}/gnat-style%{binsuffix}.info*gz
%doc %{_infodir}/gnat_rm%{binsuffix}.info*gz
%doc %{_infodir}/gnat_ugn_unw%{binsuffix}.info*gz
%endif
%files -n cpp@base_ver@
%defattr(-,root,root)
%dir %{_libdir}/gcc
%dir %{_libdir}/gcc/%{GCCDIST}
%dir %{libsubdir}
%{_prefix}/bin/cpp%{binsuffix}
%{libsubdir}/cc1
#%{libsubdir}/specs
%doc %{_mandir}/man1/cpp%{binsuffix}.1.gz
%if %{build_objc}
%files objc
%defattr(-,root,root)
%{libsubdir}/cc1obj
%{libsubdir}/include/objc
%versmainlib libobjc.a
%versmainlib libobjc.so
%if %{separate_biarch}
%files objc%{separate_biarch_suffix}
%defattr(-,root,root)
%versbiarchlib libobjc.a
%versbiarchlib libobjc.so
%endif
%files -n libobjc@base_ver@
%defattr(-,root,root)
%mainlib libobjc.so.*
%if %{separate_biarch}
%files -n libobjc@base_ver@%{separate_biarch_suffix}
%defattr(-,root,root)
%biarchlib libobjc.so.*
%endif
%endif
%if %{build_objcp}
%files obj-c++
%defattr(-,root,root)
%{libsubdir}/cc1objplus
%endif
%if %{build_ada}
%files ada
%defattr(-,root,root)
%dir %{_libdir}/gcc
%dir %{_libdir}/gcc/%{GCCDIST}
%dir %{libsubdir}
%{_prefix}/bin/gnat*
%{libsubdir}/adainclude
%dir %{libsubdir}/adalib
%{libsubdir}/adalib/*.ali
%{libsubdir}/adalib/*.a
%{libsubdir}/adalib/libgnarl.so
%{libsubdir}/adalib/libgnat.so
%{libsubdir}/adalib/g-trasym.o
%{libsubdir}/gnat1
%files -n libada@base_ver@
%defattr(-,root,root)
# Ada is not multilibbed
%{mainlibdir}/libgnarl-*.so
%{mainlibdir}/libgnat-*.so
%endif
# LIBJAVA-DELETE-END
%if %{build_java}
%if 0%{?building_libjava:1}
%files -n gcc@base_ver@-java
%defattr(-,root,root)
%{_prefix}/bin/gcj%{binsuffix}
%{_prefix}/bin/gcjh%{binsuffix}
%{_prefix}/bin/gcj-dbtool%{binsuffix}
%{_prefix}/bin/jcf-dump%{binsuffix}
%{_prefix}/bin/jv-convert%{binsuffix}
%{_prefix}/bin/gc-analyze%{binsuffix}
%{libsubdir}/jc1
%{libsubdir}/jvgenmain
%{libsubdir}/ecj.jar
%{libsubdir}/ecj1
%doc %{_mandir}/man1/gcj%{binsuffix}.1.gz
%doc %{_mandir}/man1/gcjh%{binsuffix}.1.gz
%doc %{_mandir}/man1/gcj-dbtool%{binsuffix}.1.gz
%doc %{_mandir}/man1/jcf-dump%{binsuffix}.1.gz
%doc %{_mandir}/man1/jv-convert%{binsuffix}.1.gz
%doc %{_mandir}/man1/gc-analyze%{binsuffix}.1.gz
%endif
%endif
%if %{build_java}
%if %{build_libjava}
%files -n libgcj@base_ver@
%defattr(-,root,root)
%dir %{_libdir}/gcj-%{gcc_dir_version}-%{gcj_sover}
%dir %{_libdir}/gcc
%dir %{_libdir}/gcc/%{GCCDIST}
%dir %{libsubdir}
%{_libdir}/gcj-%{gcc_dir_version}-%{gcj_sover}/classmap.db
# We usually do not multilib libjava
%if %{biarch_libjava}
%versbiarchlib libgcj.la
%biarchlib libgcj.so.*
%biarchlib libgij.so.*
%biarchlib libgcj-tools.so.*
%else
%versmainlib libgcj.la
%mainlib libgcj.so.*
%mainlib libgij.so.*
%mainlib libgcj-tools.so.*
%endif
%{_libdir}/gcj-%{gcc_dir_version}-%{gcj_sover}/libgtkpeer.la
%{_libdir}/gcj-%{gcc_dir_version}-%{gcj_sover}/libgtkpeer.so
%{_libdir}/gcj-%{gcc_dir_version}-%{gcj_sover}/libjawt.la
%{_libdir}/gcj-%{gcc_dir_version}-%{gcj_sover}/libjawt.so
%{_libdir}/gcj-%{gcc_dir_version}-%{gcj_sover}/libjvm.la
%{_libdir}/gcj-%{gcc_dir_version}-%{gcj_sover}/libjvm.so
%files -n libgcj_bc@base_ver@
%defattr(-,root,root)
%if %{biarch_libjava}
%biarchlib libgcj_bc.so.*
%else
%mainlib libgcj_bc.so.*
%endif
%files -n libgcj@base_ver@-jar
%defattr(-,root,root)
%{_prefix}/share/java/libgcj-%{gcc_dir_version}.jar
%{_prefix}/share/java/libgcj-tools-%{gcc_dir_version}.jar
%files -n libgcj@base_ver@-devel
%defattr(-,root,root)
%dir %{_prefix}/include/c++
%dir %{libsubdir}
%dir %{libsubdir}/include
%dir %{gxxinclude}
%{_libdir}/pkgconfig/libgcj%{binsuffix}.pc
%{_prefix}/bin/addr2name.awk%{binsuffix}
%{libsubdir}/include/jawt.h
%{libsubdir}/include/jawt_md.h
%{libsubdir}/include/jni.h
%{libsubdir}/include/jni_md.h
%{libsubdir}/include/jvmpi.h
%{gxxinclude}/gnu
%{gxxinclude}/gcj
%{gxxinclude}/java
%{gxxinclude}/javax
%{gxxinclude}/org
%{gxxinclude}/sun
%{libsubdir}/include/gcj
%if %{biarch_libjava}
%versbiarchlib libgcj.so
%versbiarchlib libgcj.spec
%versbiarchlib libgcj-tools.so
%versbiarchlib libgij.so
%versbiarchlib libgcj_bc.so
%else
%versmainlib libgcj.so
%versmainlib libgcj.spec
%versmainlib libgcj-tools.so
%versmainlib libgij.so
%versmainlib libgcj_bc.so
%endif
%files -n gcc@base_ver@-gij
%defattr(-,root,root)
%{_prefix}/bin/gij%{binsuffix}
%{_prefix}/bin/gappletviewer%{binsuffix}
%{_prefix}/bin/gjar%{binsuffix}
%{_prefix}/bin/gjarsigner%{binsuffix}
%{_prefix}/bin/gjavah%{binsuffix}
%{_prefix}/bin/gkeytool%{binsuffix}
%{_prefix}/bin/gnative2ascii%{binsuffix}
%{_prefix}/bin/gorbd%{binsuffix}
%{_prefix}/bin/grmic%{binsuffix}
%{_prefix}/bin/grmid%{binsuffix}
%{_prefix}/bin/grmiregistry%{binsuffix}
%{_prefix}/bin/gserialver%{binsuffix}
%{_prefix}/bin/gtnameserv%{binsuffix}
%doc %{_mandir}/man1/gij%{binsuffix}.1.gz
%doc %{_mandir}/man1/gappletviewer%{binsuffix}.1.gz
%doc %{_mandir}/man1/grmic%{binsuffix}.1.gz
%doc %{_mandir}/man1/grmid%{binsuffix}.1.gz
%doc %{_mandir}/man1/grmiregistry%{binsuffix}.1.gz
%doc %{_mandir}/man1/gkeytool%{binsuffix}.1.gz
%doc %{_mandir}/man1/gjar%{binsuffix}.1.gz
%doc %{_mandir}/man1/gjarsigner%{binsuffix}.1.gz
%doc %{_mandir}/man1/gjavah%{binsuffix}.1.gz
%doc %{_mandir}/man1/gnative2ascii%{binsuffix}.1.gz
%doc %{_mandir}/man1/gorbd%{binsuffix}.1.gz
%doc %{_mandir}/man1/gserialver%{binsuffix}.1.gz
%doc %{_mandir}/man1/gtnameserv%{binsuffix}.1.gz
%endif
%endif
# LIBFFI-DELETE-END
%if %{build_java}
%if 0%{?building_libffi:1}
%files -n libffi@base_ver@
%defattr(-,root,root)
%mainlib libffi.so.*
%if %{separate_biarch}
%files -n libffi@base_ver@%{separate_biarch_suffix}
%defattr(-,root,root)
%biarchlib libffi.so.*
%endif
%files -n libffi@base_ver@-devel
%defattr(-,root,root)
%{_prefix}/include/ffi.h
%{_prefix}/include/ffitarget.h
%mainlib libffi.so
%mainlib libffi.a
%if %{separate_biarch}
%files -n libffi@base_ver@-devel%{separate_biarch_suffix}
%defattr(-,root,root)
%biarchlib libffi.so
%biarchlib libffi.a
%endif
%endif
%endif
%if %{run_tests}
%files -n gcc@base_ver@-testresults
%defattr(-,root,root)
%doc testresults/test_summary.txt
%doc testresults/*.sum
%doc testresults/*.log
%endif
%changelog
