File hsqldb-1.8.0.10-suse-initscript.patch of Package hsqldb
Index: bin/hsqldb
===================================================================
--- bin/hsqldb.orig 2011-01-14 13:55:34.636488672 +0100
+++ bin/hsqldb 2011-01-14 14:05:37.464628070 +0100
@@ -50,7 +50,7 @@
### BEGIN INIT INFO
# Provides: HSQLDB-Server
# Required-Start: $syslog $remote_fs $network $named
-# Required-Stop:
+# Required-Stop: $syslog $remote_fs $network $named
# Default-Start: 3 5
# Default-Stop: 0 1 2 6
# Short-Description: HSQLDB-Server
@@ -89,19 +89,73 @@
# -- blaine.simpson@admc.com
+# Shell functions sourced from /etc/rc.status:
+# rc_check check and set local and overall rc status
+# rc_status check and set local and overall rc status
+# rc_status -v ditto but be verbose in local rc status
+# rc_status -v -r ditto and clear the local rc status
+# rc_failed set local and overall rc status to failed
+# rc_failed <num> set local and overall rc status to <num><num>
+# rc_reset clear local rc status (overall remains)
+# rc_exit exit appropriate to overall rc status
+. /etc/rc.status
+
+# First reset status of this service
+rc_reset
+
+# Return values acc. to LSB for all commands but status:
+# 0 - success
+# 1 - generic or unspecified error
+# 2 - invalid or excess argument(s)
+# 3 - unimplemented feature (e.g. "reload")
+# 4 - insufficient privilege
+# 5 - program is not installed
+# 6 - program is not configured
+# 7 - program is not running
+#
+# Note that starting an already running service, stopping
+# or restarting a not-running service as well as the restart
+# with force-reload (in case signalling is not supported) are
+# considered a success.
+
set +u
+# "chown" lives in /usr on some UNIXes.
+PATH="/bin:/sbin:/usr/sbin"
+
+
+NAME="$(/bin/basename $0)"
+unset ISBOOT
+if [ "${NAME:0:1}" = "S" -o "${NAME:0:1}" = "K" ]; then
+ NAME="${NAME:3}"
+ ISBOOT="1"
+fi
+
+# remove SUSE's rc name
+if [ "${NAME:0:2}" = "rc" ]; then
+ NAME="${NAME:2}"
+fi
+
+# For SELinux we need to use 'runuser' not 'su'
+if [ -x "/sbin/runuser" ]; then
+ SU="/sbin/runuser"
+else
+ SU="/bin/su"
+fi
+
# This is only used for recursive invocations.
# Will not necessarily be set correctly at system bootup invocations
# (where it is sometimes invoked like "sh... /path/to/hsqldb start"),
# but, in those cases there will be no recursion.
-INVOC_PATH=`dirname "$0"` || {
+INVOC_PATH=`/usr/bin/dirname "$0"` || {
echo "'dirname' failed" 1>&2
- exit 2
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
[ -n "$INVOC_PATH" ] && INVOC_PATH="${INVOC_PATH}/"
-SYNTAX_MSG="SYNTAX: ${INVOC_PATH}hsqldb start|stop|stopcompact|restart|restartcmpacted|status"
+SYNTAX_MSG="Usage: ${INVOC_PATH}/${NAME} start|stop|status|try-restart|restart|force-reload|reload|probe"
# You can override any of these default values in your config file:
@@ -110,9 +164,12 @@
SU_ECHO_SECS=1
# File used as semaphore. If file is removed, a running pid checker
# process will exit.
-PIDCHECKER_FLAGFILE=`mktemp /tmp/hsqldb.XXXXXXXX`
+PIDCHECKER_FLAGFILE=`/bin/mktemp /tmp/hsqldb.XXXXXXXX`
if [ x"$PIDCHECKER_FLAGFILE" = "x" ] ; then
- echo "unable to create tmp file"; exit 1
+ echo "unable to create tmp file"
+ rc_failed 1
+ rc_status -v
+ rc_exit
fi
# The following settings get overridden by optional setting in the config file.
# Time to allow for JVM to die after all HSQLDB instances stopped.
@@ -168,25 +225,31 @@
done
[ -n "$CFGFILE" ] || {
echo "No global config file found in any of allowed locations" 1>&2
- exit 11
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
# Sanity check
[ -n "$LOGFILE" ] && [ -n "$PIDFILE" ] || {
echo "Internal problem in init script" 1>&2
- exit 11
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
[ $# -eq 1 ] || {
echo "$SYNTAX_MSG" 1>&2
- exit 4
+ exit 1
}
# It would be nice to permit some uses, like "status" by non-root users,
# but for now our goal is a superuser init script.
[ -w / ] || { # Very portable, but perhaps not perfect, test for superuser.
echo "Only 'root' may use this init script" 1>&2
- exit 4
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
# Use bsd-style enable/disable if it's in place.
@@ -209,11 +272,15 @@
[ -r "$CFGFILE" ] || {
echo "Unable to read config file '$CFGFILE'" 1>&2
- exit 2
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
[ -f "$CFGFILE" ] || {
echo "'$CFGFILE' is not a regular file" 1>&2
- exit 2
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
HSQLDB_OWNER=
JAVA_EXECUTABLE=
@@ -221,6 +288,28 @@
SERVER_HOME=
SHUTDOWN_URLIDS=
. "$CFGFILE"
+
+[ -z "$JAVA_EXECUTABLE" ] && {
+ # JPackage source Java config
+ . /etc/java/java.conf
+
+ if [ -n "$JAVA_HOME" ]; then
+ JAVA_EXECUTABLE=${JAVA_HOME}/bin/java
+ else
+ JAVA_EXECUTABLE=${JVM_ROOT}/java/bin/java
+ fi
+
+ if [ -z "$JAVA_HOME" ]; then
+ if [ -d "$JVM_ROOT/java" ]; then
+ JAVA_EXECUTABLE=$JVM_ROOT/java/bin/java
+ else
+ JAVA_EXECUTABLE=$JVM_ROOT/jre/bin/java
+ fi
+ else
+ JAVA_EXECUTABLE=$JAVA_HOME/bin/java
+ fi
+}
+
# Suffix delimiter to $SERVER_ADDL_CLASSPATH, if it is set.
[ -n "$SERVER_ADDL_CLASSPATH" ] &&
SERVER_ADDL_CLASSPATH="${SERVER_ADDL_CLASSPATH}:"
@@ -229,15 +318,21 @@
[ -n "$SERVER_HOME" ] || {
echo "Config file '$CFGFILE' does not set one or more of following variables
JAVA_EXECUTABLE, HSQLDB_JAR_PATH, SERVER_HOME" 1>&2
- exit 2
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
[ -d "$SERVER_HOME" ] || {
echo "SERVER_HOME variable in '$CFGFILE' is set to a non-directory." 1>&2
- exit 2
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
[ -f "$JAVA_EXECUTABLE" ] && [ -f "$HSQLDB_JAR_PATH" ] || {
echo "JAVA_EXECUTABLE or HSQLDB_JAR_PATH in '$CFGFILE' is set to a non-file." 1>&2
- exit 2
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
# PROPERTY_FILE is a derived value.
@@ -246,28 +341,36 @@
WebServer) PROPERTY_FILE="$SERVER_HOME"/webserver.properties;;
*)
echo 'Unsupported value for $TARGET_CLASS: '"$TARGET_CLASS" 1>&2
- exit 2;;
+ rc_failed 2
+ rc_status -v
+ rc_exit
+ ;;
esac
[ -f "$PROPERTY_FILE" ] || {
echo "'$PROPERTY_FILE' is missing" 1>&2
- exit 2
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
[ -r "$PROPERTY_FILE" ] || {
echo "'$PROPERTY_FILE' isn't readable" 1>&2
- exit 2
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
[ -r "$HSQLDB_JAR_PATH" ] || {
echo "'$HSQLDB_JAR_PATH' isn't readable" 1>&2
- exit 2
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
[ -x "$JAVA_EXECUTABLE" ] || {
echo "No Java executable found at '$JAVA_EXECUTABLE'" 1>&2
- exit 2
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
-# "chown" lives here on some UNIXes.
-PATH="$PATH:/usr/sbin"
-
# Make a good effort (but not bullet-proof) check on permissions of the
# auth file. Unfortunately, if auth-file is not specified, this depends
# upon both (a) $HOME being set; and (b) SqlToolSprayer and SqlTool defaults.
@@ -279,15 +382,21 @@
[ -n "${_AUTH_TEST_PATH}" ] || _AUTH_TEST_PATH="$HOME/sqltool.rc"
[ -f "$_AUTH_TEST_PATH" ] || {
echo "No auth file found at '$_AUTH_TEST_PATH'" 1>&2
- exit 2
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
[ -r "$_AUTH_TEST_PATH" ] || {
echo "Auth file '$_AUTH_TEST_PATH' not readable" 1>&2
- exit 2
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
ls -ld "$_AUTH_TEST_PATH" | grep '^-..------' > /dev/null 2>&1 || {
echo "Fix permissions on '$_AUTH_TEST_PATH' like 'chmod 600 $_AUTH_TEST_PATH'" 1>&2
- exit 2
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
fi
@@ -296,29 +405,37 @@
[ -r "$PIDFILE" ] && {
[ -f "$PIDFILE" ] || {
echo "'$PIDFILE' is not a regular file" 1>&2
- exit 6
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
[ -w "$PIDFILE" ] || {
echo "'$PIDFILE' is not writable" 1>&2
- exit 6
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
HSQLDB_PID="`cat $PIDFILE`" || {
echo "Failed to read pid file '$PIDFILE'" 1>&2
- exit 6
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
case "$HSQLDB_PID" in
*[a-zA-Z/!@#$%*+=_~]*) HSQLDB_PID=;;
*'^'*) HSQLDB_PID=;;
esac
[ -n "$HSQLDB_PID" ] || {
- echo "Pid file '$PIDFILE' does not contain a valid process identifier" 1>&2
- exit 6
+ rc_failed 7
+ rc_status -v
+ rc_exit
}
kill -0 "$HSQLDB_PID" > /dev/null 2>&1 || {
echo 'Removing stale pid file'
rm -f "$PIDFILE" || {
- echo "Failed to remove pid file '$PIDFILE'" 1>&2
- exit 6
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
HSQLDB_PID=
}
@@ -329,7 +446,9 @@
status)
[ -n "$HSQLDB_PID" ] || {
echo "I don't know of any running hsqldb server."
- exit 0
+ rc_failed 7
+ rc_status -v
+ rc_exit
}
echo "There is an hsqldb server loaded from $HSQLDB_JAR_PATH
running with pid $HSQLDB_PID."
@@ -348,32 +467,42 @@
"-Dsqltoolsprayer.propfile=$PROPERTY_FILE" \
"-Dsqltoolsprayer.monfile=$PIDFILE" \
org.hsqldb.util.SqlToolSprayer '--;'
+ rc_failed 0
+ rc_status -v
+ rc_exit
;;
start)
[ -n "$HSQLDB_PID" ] && {
echo "There is already a hsqldb server running with pid $HSQLDB_PID." 1>&2
- exit 1
+ rc_failed 0
+ rc_status -v
+ rc_exit
}
TLS_SWITCHES=
[ -n "$TLS_KEYSTORE" ] &&
TLS_SWITCHES="-Djavax.net.ssl.keyStore=$TLS_KEYSTORE -Djavax.net.ssl.keyStorePassword=$TLS_PASSWORD"
if [ -n "$HSQLDB_OWNER" ]; then
touch "$PIDFILE" || {
- echo "Failed to create pid file" 1>&2
- exit 1
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
chown "$HSQLDB_OWNER" "$PIDFILE" || {
echo "Failed to chown pid file to '$HSQLDB_OWNER'" 1>&2
- exit 1
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
# Some OSes choke if there are newlines in this string.
# N.b.!!! The shell of the -c command is the target user's default
# login shell, so keep this command shell-independent!
- nohup su "$HSQLDB_OWNER" -c "cd '$SERVER_HOME' && echo "'$$'" > '$PIDFILE' && exec '$JAVA_EXECUTABLE' $SERVER_JVMARGS $TLS_SWITCHES -classpath '${SERVER_ADDL_CLASSPATH}${HSQLDB_JAR_PATH}' org.hsqldb.util.MainInvoker org.hsqldb.$TARGET_CLASS $INVOC_ADDL_ARGS" >> "$LOGFILE" 2>&1 &
+ /usr/bin/nohup $SU "$HSQLDB_OWNER" -s /bin/sh -c "cd '$SERVER_HOME' && echo "'$$'" > '$PIDFILE' && exec '$JAVA_EXECUTABLE' $SERVER_JVMARGS $TLS_SWITCHES -classpath '${SERVER_ADDL_CLASSPATH}${HSQLDB_JAR_PATH}' org.hsqldb.util.MainInvoker org.hsqldb.$TARGET_CLASS $INVOC_ADDL_ARGS" >> "$LOGFILE" 2>&1 &
else
cd "$SERVER_HOME" || {
echo "Failed to cd to '$SERVER_HOME'" 1>&2
- exit 1
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
export JAVA_EXECUTABLE
export HSQLDB_JAR_PATH
@@ -382,10 +511,12 @@
export SERVER_JVMARGS
export TARGET_CLASS
export INVOC_ADDL_ARGS
- nohup sh -c '
+ /usr/bin/nohup sh -c '
echo $$ > "$PIDFILE" || {
echo "Failed to write pid to pid file" 1>&2
- exit 1
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
eval exec "$JAVA_EXECUTABLE" $SERVER_JVMARGS $TLS_SWITCHES -classpath "${SERVER_ADDL_CLASSPATH}${HSQLDB_JAR_PATH}" org.hsqldb.util.MainInvoker org.hsqldb.$TARGET_CLASS $INVOC_ADDL_ARGS
' >> "$LOGFILE" 2>&1 &
@@ -404,7 +535,9 @@
# but regardless of why, the pid file does not contain a valid pid.
touch "$PIDCHECKER_FLAGFILE" || {
echo "Failed to touch file '$PIDCHECKER_FLAGFILE'" 1>&2
- exit 1
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
export PIDCHECKER_FLAGFILE
export PIDFILE
@@ -414,7 +547,9 @@
[ -f "$PIDCHECKER_FLAGFILE" ] || exit 0
kill -0 "`cat $PIDFILE`" > /dev/null 2>&1 || {
rm -f "$PIDFILE" "$PIDCHECKER_FLAGFILE"
- exit 1
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
sleep 1
done
@@ -426,18 +561,24 @@
org.hsqldb.util.SqlToolSprayer '--;' && {
rm -f "$PIDCHECKER_FLAGFILE"
echo "org.hsqldb.$TARGET_CLASS started with pid `cat $PIDFILE`"
- exit 0
+ rc_failed 0
+ rc_status -v
+ rc_exit
}
rm -f "$PIDCHECKER_FLAGFILE"
echo "Failed to start org.hsqldb.$TARGET_CLASS.
See log file '$LOGFILE'." 1>&2
- exit 1
+ rc_failed 1
+ rc_status -v
+ rc_exit
;;
stop|stopcompact)
[ "$COMMAND" = stopcompact ] && SHUTDOWN_OPTION='compact'
[ -n "$HSQLDB_PID" ] || {
echo "I don't know of any running hsqldb server." 1>&2
- exit 1
+ rc_failed 7
+ rc_status -v
+ rc_exit
}
AUTH_FILE_SWITCH=
# N.b., there will be a problem if there are special characters or
@@ -455,23 +596,64 @@
sleep $MAX_TERMINATE_SECS # Give the JVM a sec. or 2 to fully exit.
kill -0 "$HSQLDB_PID" > /dev/null 2>&1 && {
echo "WARNING: hsqldb is still running!" 1>&2
- exit 1
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
rm -f "$PIDFILE" || {
echo "Failed to remove pid file '$PIDFILE'" 1>&2
- exit 1
+ rc_failed 1
+ rc_status -v
+ rc_exit
}
echo "Successful shutdown ${SHUTDOWN_OPTION} (for the $TARGET_CLASS process)!"
- exit 0
+ rc_failed 0
+ rc_status -v
+ rc_exit
;;
restart|restartcompacted)
STOP_COMMAND=stop
[ "$COMMAND" = restartcompacted ] && STOP_COMMAND=stopcompact
- "${INVOC_PATH}"hsqldb $STOP_COMMAND || exit $?
+ "${INVOC_PATH}"hsqldb $STOP_COMMAND || {
+ rc_failed $?
+ rc_status -s
+ rc_exit
+ }
exec "${INVOC_PATH}"/hsqldb start
+ rc_failed $?
+ rc_status -s
+ rc_exit
;;
+ try-restart)
+ ## Stop the service and if this succeeds (i.e. the
+ ## service was running before), start it again.
+ ## Note: try-restart is not (yet) part of LSB (as of 0.7.5)
+ $0 status >/dev/null && $0 restart
+
+ # Remember status and be quiet
+ rc_status
+ ;;
+ force-reload)
+ ## Signal the daemon to reload its config. Most daemons
+ ## do this on signal 1 (SIGHUP).
+ ## If it does not support it, restart.
+
+ echo -n "Reload service hsqldb"
+ ## if it supports it:
+ #killproc -HUP $TOMCAT_BIN
+ #touch /var/run/FOO.pid
+ #rc_status -v
+
+ ## Otherwise:
+ $0 stop && $0 start
+ rc_status
+ ;;
+ reload|probe)
+ rc_failed 3
+ rc_status -v
+ ;;
*)
echo "$SYNTAX_MSG" 1>&2
- exit 5
+ exit 1
;;
esac
