File vde2.spec of Package vde2
#
# spec file for package vde2
#
# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
Name: vde2
Version: 2.3.2
Release: 0
Summary: Virtual Distributed Ethernet
License: GPL-2.0
Group: Productivity/Networking/Other
Url: http://vde.sourceforge.net/
Source0: %name-%version.tar.bz2
Source1: README.SUSE
BuildRequires: gcc-c++
BuildRequires: libopenssl-devel
BuildRequires: libpcap-devel
BuildRequires: pkg-config
BuildRequires: python-devel
Recommends: %name-cryptcab = %version
Recommends: %name-slirp = %version
Recommends: qemu kvm
%{py_requires}
BuildRoot: %{_tmppath}/%{name}-%{version}-build
%description
VDE is a virtual network that can be spawned over a set of physical
computer over the Internet
VDE connects together:
(1) real GNU-linux boxes (tuntap)
(2) virtual machines: UML-User Mode Linux, qemu, bochs, MPS.
VDE can be used:
(i) to create a general purpose tunnel (every protocol that runs
on a Ethernet can be put into the tunnel)
(ii) to connect a set of virtual machine to the Internet with no
need of free access of tuntap
(iii) to support mobility: a VDE can stay interconnected despite
of the change of virtual cables, i.e. the change of IP addresses
and interface in the real world
%package cryptcab
Summary: VDE ecryption module
License: GPL-2.0
Group: Productivity/Networking/Other
%description cryptcab
This package contains CryptCab, which can be used
to send encrypted data over an UDP link.
%package slirp
Summary: VDE ecryption module
License: BSD-4-Clause and MIT
Group: Productivity/Networking/Other
%description slirp
slirpvde is a slirp interface for a VDE network.
Slirpvde connects all the units (virtual or real machines) to the network
of the host where slirpvde runs as it were a NAT/Masquerading router.
The default route is the node 2 (10.0.2.2 in the default network configuration)
and DNS is re-mapped in node 3 (10.0.2.3).
Slirpvde runs using standard user privileges (no need for root access):
all the connections are re-generated by slirpvde itself.
IPv4 only. IPv6 is still unsupported (will be supported when slirpvde
will be rewritten using the LWIPv6 network stack).
%package -n libvdehist0
Summary: VDE history library
License: GPL-2.0
Group: Development/Languages/C and C++
%description -n libvdehist0
This package contains VDE history library
A library to manage history and command completion for vde mgmt protocol
%package -n libvdemgmt0
Summary: VDE management library
License: GPL-2.0
Group: Development/Languages/C and C++
%description -n libvdemgmt0
This package contains a library to interact with vde_switch
management console using pre-made unattended scripts.
%package -n libvdeplug3
Summary: VDE plug library
License: GPL-2.0
Group: Development/Languages/C and C++
%description -n libvdeplug3
This package contains a library that makes programs able to connect
to a local VDE switch. The simplest one is vde_plug, contained in the vde2 package.
%package -n libvdesnmp0
Summary: VDE snmp library
License: GPL-2.0
Group: Development/Languages/C and C++
%description -n libvdesnmp0
This package contains VDE snmp library
SNMP library for Virtual Distributed Ethernet
%package -n libvdehist0-devel
Summary: VDE hist header files
License: GPL-2.0
Group: Development/Languages/C and C++
Requires: %name = %version
Requires: libvdehist0 = %version
%description -n libvdehist0-devel
This package contains VDE hist header files
%package -n libvdemgmt0-devel
Summary: VDE management files
License: GPL-2.0
Group: Development/Languages/C and C++
Requires: %name = %version
Requires: libvdemgmt0 = %version
%description -n libvdemgmt0-devel
This package contains VDE management files
%package -n libvdeplug3-devel
Summary: VDE plug header files
License: GPL-2.0
Group: Development/Languages/C and C++
Requires: %name = %version
Requires: libvdeplug3 = %version
%description -n libvdeplug3-devel
This package contains VDE plug header files
%package -n libvdesnmp0-devel
Summary: VDE snmp header files
License: GPL-2.0
Group: Development/Languages/C and C++
Requires: %name = %version
Requires: libvdesnmp0 = %version
%description -n libvdesnmp0-devel
This package contains VDE snmp header files
%prep
%setup -q
%build
%configure \
--enable-kernel-switch
#make %{?_smp_mflags}
%__make
%install
%__cp %SOURCE1 .
%makeinstall
%__rm %buildroot/%{python_sitelib}/vdeplug_python.la
%__rm %buildroot/%_libdir/*.la
%__rm %buildroot/%_libdir/*.a
%__rm %buildroot/%_libdir/*/*.la
%__rm %buildroot/%_libdir/*/*.a
%__rm %buildroot/%_libdir/*/*/*.la
%clean
%{?buildroot:%__rm -rf "%{buildroot}"}
%post -n libvdehist0 -p /sbin/ldconfig
%postun -n libvdehist0 -p /sbin/ldconfig
%post -n libvdemgmt0 -p /sbin/ldconfig
%postun -n libvdemgmt0 -p /sbin/ldconfig
%post -n libvdeplug3 -p /sbin/ldconfig
%postun -n libvdeplug3 -p /sbin/ldconfig
%post -n libvdesnmp0 -p /sbin/ldconfig
%postun -n libvdesnmp0 -p /sbin/ldconfig
%files
%defattr(-,root,root)
%doc Changelog README COPYING README.SUSE
%doc doc/README.VirtualBox doc/README.qemu doc/vde_autolink-HOWTO
%doc doc/README.UML doc/vdeqemu-HOWTO doc/README.vde_over_ns
%dir %_libdir/vde2
%dir %_libdir/vde2/vde_l3
%dir %_sysconfdir/vde2
%_bindir/dpipe
%_bindir/kvde_switch
%_bindir/unixcmd
%_bindir/unixterm
%_bindir/vde_autolink
%_bindir/vde_l3
%_bindir/vde_over_ns
%_bindir/vde_pcapplug
%_bindir/vde_plug
%_bindir/vde_plug2tap
%_bindir/vde_switch
%_bindir/vdecmd
%_bindir/vdekvm
%_bindir/vdeq
%_bindir/vdeqemu
%_bindir/vdeterm
%_bindir/wirefilter
%_sbindir/vde_tunctl
%_libexecdir/vdetap
%_libdir/vde2/libvdetap.so
%_libdir/vde2/vde_l3/bfifo.so
%_libdir/vde2/vde_l3/pfifo.so
%_libdir/vde2/vde_l3/tbf.so
%{python_sitelib}/VdePlug.py
%{python_sitelib}/vdeplug_python.so
%config %_sysconfdir/vde2/vdecmd
%_mandir/man1/*
%_mandir/man8/*
%exclude %_mandir/man1/vde_cryptcab.*
%exclude %_mandir/man1/slirpvde.*
%files cryptcab
%defattr(-,root,root)
%doc Changelog README COPYING
%_bindir/vde_cryptcab
%_mandir/man1/vde_cryptcab.*
%files slirp
%defattr(-,root,root)
%doc Changelog README COPYING doc/README.slirpvde
%_bindir/slirpvde
%_mandir/man1/slirpvde.1.gz
%files -n libvdehist0
%defattr(-,root,root)
%doc Changelog README COPYING
%_libdir/libvdehist.so.0
%_libdir/libvdehist.so.0.0.1
%files -n libvdemgmt0
%defattr(-,root,root)
%doc Changelog README COPYING
%dir %_sysconfdir/vde2/libvdemgmt
%_libdir/libvdemgmt.so.0
%_libdir/libvdemgmt.so.0.0.1
%config %_sysconfdir/vde2/libvdemgmt/asyncrecv.rc
%config %_sysconfdir/vde2/libvdemgmt/closemachine.rc
%config %_sysconfdir/vde2/libvdemgmt/openmachine.rc
%config %_sysconfdir/vde2/libvdemgmt/sendcmd.rc
%files -n libvdeplug3
%defattr(-,root,root)
%doc Changelog README COPYING COPYING.libvdeplug
%_libdir/libvdeplug.so.3
%_libdir/libvdeplug.so.3.0.1
%files -n libvdesnmp0
%defattr(-,root,root)
%doc Changelog README COPYING
%_libdir/libvdesnmp.so.0
%_libdir/libvdesnmp.so.0.0.1
%files -n libvdehist0-devel
%defattr(-,root,root)
%doc Changelog README COPYING
%_includedir/libvdehist.h
%_libdir/libvdehist.so
%_libdir/pkgconfig/vdehist.pc
%files -n libvdemgmt0-devel
%defattr(-,root,root)
%doc Changelog README COPYING
%_includedir/libvdemgmt.h
%_libdir/libvdemgmt.so
%_libdir/pkgconfig/vdemgmt.pc
%files -n libvdeplug3-devel
%defattr(-,root,root)
%doc Changelog README COPYING
%_includedir/libvdeplug.h
%_includedir/libvdeplug_dyn.h
%_libdir/libvdeplug.so
%_libdir/pkgconfig/vdeplug.pc
%files -n libvdesnmp0-devel
%defattr(-,root,root)
%doc Changelog README COPYING
%_includedir/libvdesnmp.h
%_libdir/libvdesnmp.so
%_libdir/pkgconfig/vdesnmp.pc
%changelog
