File perl-Log-Dispatch.changes of Package perl-Log-Dispatch
-------------------------------------------------------------------
Sun Oct 1 05:40:30 UTC 2017 - coolo@suse.com
- updated to 2.67
see /usr/share/doc/packages/perl-Log-Dispatch/Changes
2.67 2017-09-24
- Added a lazy_open option to the File output. This delays opening the file
until the first time a log message is written to it. Implemented by Slaven
Rezić. GH #50.
-------------------------------------------------------------------
Wed Aug 16 05:43:04 UTC 2017 - coolo@suse.com
- updated to 2.66
see /usr/share/doc/packages/perl-Log-Dispatch/Changes
2.66 2017-08-14
- Fixed the ApacheLog output, which was broken in 2.60. Fixed by Michael
Schout. GitHub #48 and #49.
-------------------------------------------------------------------
Wed Jun 14 05:47:36 UTC 2017 - coolo@suse.com
- updated to 2.65
see /usr/share/doc/packages/perl-Log-Dispatch/Changes
2.65 2017-06-11
- When Log::Dispatch::File is asked to chmod a file and that fails, show the
requested permissions in octal. Patch by Carsten Grohmann. GitHub #46.
2.64 2017-02-25 (TRIAL RELEASE)
- Improve level validation and canonicalization logic. Patch by Kerin Millar,
minor changes and tests by Kivanc Yazan. Github #42.
- The log_and_die and log_and_croak methods are now identical, as we set
@CARP_NOT for Log::Dispatch to exclude the Log::Dispatch package. You can
still explicitly pass carp_level to log_and_croak.
-------------------------------------------------------------------
Thu May 25 08:26:25 UTC 2017 - coolo@suse.com
- updated to 2.63
see /usr/share/doc/packages/perl-Log-Dispatch/Changes
2.63 2017-02-19
- Updated the conflicting version for Log::Dispatch::File::Stamped in
metadata (due to changes in handling of close_after_write). Patch by Karen
Etheridge. GitHub #41.
2.62 2017-02-13
- Devel::Confess was accidentally being loaded in Log::Dispatch. Fixed by
Karen Etheridge. GitHub #39.
2.61 2017-02-13
- The 2.60 release would throw an exception if the logged message was
empty. While this makes sense, it also breaks backwards compatibility, so it
has been reverted. Reported by Greg Oschwald. GitHub #38.
- The 2.60 release would throw an exception if you tried to create a Syslog
output where the ident was an empty string. Reported by Greg
Oschwald. GitHub #38.
2.60 2017-02-12
- Same as 2.59 ... Switched from Params::Validate to
Params::ValidationCompiler. This should speed up constructors and logging a
little bit. This also allows Log::Dispatch::File to accept things like
Path::Tiny objects for filenames. Reported by Joel Berger. GitHub #36.
2.59 2017-02-05 (TRIAL RELEASE)
- Switched from Params::Validate to Params::ValidationCompiler. This should
speed up constructors and logging a little bit. This also allows
Log::Dispatch::File to accept things like Path::Tiny objects for
filenames. Reported by Joel Berger. GitHub #36.
-------------------------------------------------------------------
Tue Nov 15 06:37:42 UTC 2016 - coolo@suse.com
- updated to 2.58
see /usr/share/doc/packages/perl-Log-Dispatch/Changes
2.58 2016-11-13
- Switched from RT to the GitHub issue tracker.
-------------------------------------------------------------------
Mon Aug 15 05:28:10 UTC 2016 - coolo@suse.com
- updated to 2.57
see /usr/share/doc/packages/perl-Log-Dispatch/Changes
2.57 2016-08-13
- Added a remove_callback method to the main Log::Dispatch object as well as
all outputs.
-------------------------------------------------------------------
Mon May 23 12:04:59 UTC 2016 - coolo@suse.com
- updated to 2.56
see /usr/share/doc/packages/perl-Log-Dispatch/Changes
2.56 2016-05-06
- Cleaned up some cruft in Pod. Some sections ended up in there twice.
2.55 2016-05-06
- The values of $@, $!, and $? are protected in various cases where they could
end up being changed by logging code. Patch by Salvador Fandiño. GitHub #18.
- Treat MSYS2 like Cygwin in tests. Fix by Graham Ollis. GitHub #19.
-------------------------------------------------------------------
Tue Jan 19 10:02:29 UTC 2016 - coolo@suse.com
- updated to 2.54
see /usr/share/doc/packages/perl-Log-Dispatch/Changes
2.54 2016-01-18
- Fixed File::Locked even more. While some deadlocks were eliminated, there
was still an issue when a Log::Dispatch object was created in a parent
process and then recreated in the children. If the close_after_write
parameter was false, then there would be a deadlock.
- Made Syslog work on a threaded Perl when the threads module was not
explicitly loaded. Fixed by Konrad Bucheli. GitHub #13.
- The log() method now accepts a level parameter as an integer. Fixed by Steve
Bertrand. GitHub #15.
2.53 2016-01-14
- Actually fix File::Locked, this time with some actual tests.
2.52 2016-01-13
- Make File::Locked output do an explicit unlock if the close_after_write
option is not set. Without this it would open the file once in each process,
attempting to get a lock at open time, pretty much guaranteeing a deadlock
in a multiprocess environment. Now it should work sanely whether
close_after_write is true or not.
-------------------------------------------------------------------
Sun Sep 20 08:58:55 UTC 2015 - coolo@suse.com
- updated to 2.51
see /usr/share/doc/packages/perl-Log-Dispatch/Changes
2.51 2015-09-19
- Fixed t/08-screen.t on Windows platforms.
-------------------------------------------------------------------
Thu Sep 3 08:48:01 UTC 2015 - coolo@suse.com
- updated to 2.50
see /usr/share/doc/packages/perl-Log-Dispatch/Changes
2.50 2015-09-02
- Changed how the Screen output handles UTF-8 data once more. The Screen
module has gone back to printing output directly to the global STDOUT and
STDERR handles. The previous changes broke the tests for several modules,
including Log::Dispatch::Config. This change should fix them.
-------------------------------------------------------------------
Sun Aug 23 08:57:34 UTC 2015 - coolo@suse.com
- updated to 2.49
see /usr/share/doc/packages/perl-Log-Dispatch/Changes
2.49 2015-08-21
- The Screen output now enables autoflush on the handle it uses to send output
to STDOUT or STDERR every time it sends a message. This does not affect the
global STDOUT or STDERR, as the Screen module makes its own handle for
output. This fixes a bug reported by Karen Etheridge that caused this module
to not play nicely with Capture::Tiny in some cases. RT #106605.
-------------------------------------------------------------------
Sat Aug 8 08:45:21 UTC 2015 - coolo@suse.com
- updated to 2.48
see /usr/share/doc/packages/perl-Log-Dispatch/Changes
2.48 2015-08-07
- Fixed (I hope) tests that were added in the last release that fail on
Windows.
2.47 2015-08-06
- Really, really make per-thread locking work. Depending on when threads and
threads::shared were loaded, you might get an error like 'Type of arg 1 to
threads::shared::share must be one of $@% at .../Log/Dispatch/Syslog.pm line
67, near "$thread_lock)"'. Reported by David Schweikert.
- Added support for auth-related parameters and replyto to
Log::Dispatch::Email::MailSender. Implemented by Rohan Carly. Based on
GitHub #10.
- Added a utf8 flag for Log::Dispatch::Screen. If this is true, then it sets
the ":encoding(UTF-8)" flag on the handle it uses for output (without
affecting STDOUT or STDERR elsewhere). Suggested by Ivan Baidakou.
2.46 2015-08-05
- Really make the per-thread locking in the Syslog output work. Based on a
patch by David Schweikert. GitHub #9.
-------------------------------------------------------------------
Mon Jun 15 08:50:03 UTC 2015 - coolo@suse.com
- updated to 2.45
see /usr/share/doc/packages/perl-Log-Dispatch/Changes
2.45 2015-06-14
- Don't include threads and threads::shared in list of dependencies. This is
only needed for Log::Dispatch::Syslog and is loaded at runtime as needed
(which has its own issues but ...). Reported by Kent Fredric. RT #103392.
-------------------------------------------------------------------
Sat Mar 21 21:16:26 UTC 2015 - mpluskal@suse.com
- Update to 2.44
* The fix for a buffered email output in the last release
introduced a bug with _non-buffered_ email outputs. This would
cause a fatal error during global destruction when the DESTROY
method was called. Reported by Chrison Hutchinson. RT #99474.
- Changes for 2.43
* Fixed the thread locking in Log::Dispatch::Syslog (I hope).
The previous version caused Perl to crash when per-thread
locking was enabled. Note that I don't use threads so I haven't
tested this. Patch by Sergio Fernández Muñoz. RT # 99208.
* If a buffered email output is being destroyed during global
destruction and still has messages in the buffer, we warn and
do not attempt to send the messages. During global destruction,
the package we use to send email may already be destroyed,
leading to weird errors when we try to use it. Reported by
Mark Overmeer. RT #97733.
* In 2.42 I added the ability to pass a hashref for the socket
parameter given to Log::Dispatch::Syslog, but I forgot to
mention this here. This is necessary to support remote logging.
Patch by David Coppit. RT #93045.
-------------------------------------------------------------------
Mon Sep 22 10:16:56 UTC 2014 - coolo@suse.com
- really remove Log-Dispatch-old_Test-More.patch
-------------------------------------------------------------------
Fri Sep 19 12:15:47 UTC 2014 - coolo@suse.com
- updated to 2.42
- Added a Log::Dispatch->clone() method. This returns shallow clone. The
outputs and callbacks are shared, but changes to outputs and callbacks in
the clone do not affect the original, or vice versa.
- Added Log::Dispatch->outputs() method. This returns all the output objects
in a dispatch object.
- Added Log::Dispatch->callbacks() method. This returns all the callback subs
in a dispatch object.
- The Syslog output now calls Sys::Syslog::setlogsock() every time a message
is logged, since something else could have called it in between logging two
messages.
- Added a lock parameter to the Syslog output. If this is true, then logging
is done in the scope of a per-thread lock. Reported by Cedric Carree and
Franck Youssef. RT #67988 and #85013.
- Replaced Class::Load with Module::Runtime.
-------------------------------------------------------------------
Fri Jul 26 10:01:24 UTC 2013 - coolo@suse.com
- updated to 2.41
- An error is now thrown if you call Log::Dispatch->log without a
level. Previously you'd just get a warning and then execution would continue
(without logging anything). Patch by Ross Attrill. RT #87133.
- Added a conflict entry for older Log::Dispatch::File::Stamped to the
metadata. Patch by Karen Etheridge. RT #86215.
- remove outdated Log-Dispatch-old_Test-More.patch
-------------------------------------------------------------------
Wed Jun 5 11:46:40 UTC 2013 - coolo@suse.com
- updated to 2.39
- You can now pass a port option to the MailSender output. Patch by Whitney
Jackson.
- Fix test that used undeclared prereqs so it does not do that.
- Moved Log::Dispatch::File constructor parameter validation moved to
_basic_init() to facilitate proper subclassing. Patch by ether. RT #84545.
- Added a very simple Log::Dispatch::Code output. This lets you log to a
subroutine reference.
- Added Sys::Syslog 0.25 as a prereq. This is a temporary fix to the problem
of Log::Dispatch shipping lots of output modules with undeclared prereqs (so
as not to require mod_perl, four email sending modules, etc.). In the future
Log::Dispatch will be split into a core distro and a set of distros, one for
each output that has prereqs. Reported by Michael Schwern. RT #84481.
- Added a big warning about the potential for deadlocks in the documentation
for Log::Dispatch::File::Locked. Patch by ether.
- Fix a test bug that caused the tests to fail on all Perls before 5.16.0.
- Added a 'syswrite' option to Log::Dispatch::File which causes all writes to
use syswrite (so they're atomic). Patched by ether. RT #81669.
- The File output's DESTROY method now checks to see if it's associated handle
is open before trying to close it. Patch by Jeffrey Thalhammer.
-------------------------------------------------------------------
Mon Aug 22 09:10:29 UTC 2011 - lars@linux-schulserver.de
- fix build on distributions with old Test::More module
( Log-Dispatch-old_Test-More.patch )
-------------------------------------------------------------------
Sat Apr 2 19:36:48 UTC 2011 - coolo@novell.com
- update to 2.29
- Add is_$level methods for compatibility with Log::Contextual
-------------------------------------------------------------------
Tue Feb 1 16:45:57 UTC 2011 - chris@computersalat.de
- update to 2.28
- The Log::Dispatch module still had version 2.26 in the last
release. Reported by Øyvind Skaar. RT #63876.
- 2.27 2010-10-16
- Fix docs on handling of arrays passed to ->debug, ->error,
etc. Requested by Andrew Hanenkamp. RT #61400.
- Allow an arrayref for the Syslog socket option. Requested by Paul
Bennett. RT #57631.
- License is now Artistic 2.0.
- split pkg to 2_26 for Sys::Syslog >= 0.16
- disable build for suse_version <= 1120
- remove Author
-------------------------------------------------------------------
Tue Nov 30 19:20:26 UTC 2010 - coolo@novell.com
- switch to perl_requires macro
-------------------------------------------------------------------
Wed Mar 10 21:02:46 UTC 2010 - chris@computersalat.de
- clenaup spec
o deps perl-macros
- fix deps
o perl(Sys::Syslog) >= 0.16
-------------------------------------------------------------------
Sun Jan 10 15:43:32 CET 2010 - jengelh@medozas.de
- enable parallel build
-------------------------------------------------------------------
Sat Dec 12 18:51:57 UTC 2009 - chris@computersalat.de
- update to 2.26
- Doc updates. The 2.23 constructor API was still shown in all the output
subclasses. Fixed by Jon Swartz.
- 2.25 Sep 15, 2009
- Added a workaround for a weird tainting issue with Params::Validate. This
caused a taint exception when a Log::Dispatch::Syslog was created under
taint mode. Note that there is still a problem in Params::Validate itself,
this is just a hack.
- 2.24 Sep 13, 2009
- Simplified new constructor API (the 2.23 API is still silently supported but
not documented):
Log::Dispatch->new( outputs => [ [ 'File', ... ],
[ 'Screen', ... ],
]
);
Implemented by Jon Swartz.
- All of the mail sending modules now warn unconditionally if sending mail
fails. This removes the incorrect use of warnings::enabled() in some
modules. RT #43516.
- 2.23 Sep 12, 2009
- New constructor API that simplifies creating your Log::Dispatch object.
Implemented by Jon Swartz.
- Made name parameter optional. We now auto-generate a unique name if one is
not given. Implemented by Jon Swartz.
- Added a newline parameter that causes a newline to be added to each message,
and updated the documentation regarding newlines. Implemented by Jon Swartz.
- Removed repetitive boilerplate documentation from each output
class. Implemented by Jon Swartz.
- The level_names and level_numbers used internally are now computed once and
shared between output objects. Implemented by Jon Swartz.
- Updated repo url - now at http://hg.urth.org/hg/Log-Dispatch
- Explicitly depend on Sys::Syslog 0.16.
- Added warn as a synonym for warning. RT #44821. Requested by Dylan Martin.
- Added an add_callback method to Log::Dispatch and
Log::Dispatch::Output. This lets you add a new formatting callback after an
object is created. Based on a patch from Ricardo Signes. RT #48283.
- The Log::Dispatch docs mistakenly told you to provide a log() method when
creating a new output class. RT #40561.
- Made all modules have the same version as Log::Dispatch itself.
- 2.22 Nov 11, 2008
- Fixed a bug where Log::Dispatch::Email would die when it tried to
log under taint mode. Patch by Neil Hemingway. RT #40042.
- Fixed a misuse of warnings::enabled(). Reported by Darian
Patrick. RT #39784.
- Syslog logging now requires Sys::Syslog 0.16+.
- If you don't pass a socket argument to Log::Dispatch::Syslog, it
does not call Sys::Syslog::setlogsock(), which is the preferred
option for portability.
* If any of the syslog calls die, this is trapped and the error is
output as a warning if warnings are on. This is mostly a workaround
for Sys::Sylog not handling utf-8. RT #35270 & #37397.
This isn't backwards-compatible, but it's probably wrong for the
logging code to die because it can't log (even though some other
output modules still do).
- cleanup spec
* define cpan_name
* sorted tags
* fix build-/deps
* update desc
* added Changes LICENSE SIGNATURE to doc
* moved changelog to .changes
- added perl-macros
* perl_gen_filelist
-------------------------------------------------------------------
Fri Sep 12 13:55:27 CEST 2008 - cwh@suse.de
- Removed BuildRequires for perl-Module-Build since this package
provides a traditional Makefile.PL again.
- 2.21 Feb 6, 2008
- Added log_and_die() and log_and_croak() methods. Patch by Yuval
Kogman.
- 2.20 Nov 2, 2007
- One of the tests failed on Perl 5.6.x. Thanks to Slaven Rezic for
the report.
- 2.19 Nov 1, 2007
- Switched to providing a traditional Makefile.PL as well as a
Build.PL file. RT #27208.
- When permissions are specified for a Log::Dispatch::File object,
don't try to chmod the file unless the permissions of the file
differ from what the file already has. Based on a patch by Kevin. RT
#28151.
- Require at least Perl 5.6.0.
- Remove the tests for the email sending and exit codes, since the
test had a heisenbug I could not understand. I _think_ the code in
the email modules is correct, but the test isn't proving anything.
- Added a binmode parameter for Log::Dispatch::File. Based on a patch
by Angelo. RT #26063.
-------------------------------------------------------------------
Sat Aug 4 13:44:31 CEST 2007 - aj@suse.de
- Fix filelist.
-------------------------------------------------------------------
Wed Jul 25 11:57:41 CEST 2007 - cwh@suse.de
- update to v2.18: Log::Dispatch::ApacheLog should really now work
under mod_perl 2 , as well as mod_perl 1
-------------------------------------------------------------------
Wed Oct 25 15:05:33 CEST 2006 - cwh@suse.de
2.13 Sep 25, 2006
- No code changes, just added a SUPPORT section to the docs referring
folks to RT for bug reports & patches.
2.12 Aug 9, 2006
- The various email sending modules could overwrite if they were in
buffered mode and they sent mail as a script exited. Reported by
Dean Kopesky.
- Doc tweaks. Make reference to "Log Levels" section in output module
docs more explicit. RT #11224.
-------------------------------------------------------------------
Wed Jan 25 21:39:48 CET 2006 - mls@suse.de
- converted neededforbuild to BuildRequires
-------------------------------------------------------------------
Wed Sep 28 23:11:46 CEST 2005 - dmueller@suse.de
- add norootforbuild
-------------------------------------------------------------------
Mon Aug 1 10:59:44 CEST 2005 - cthiel@suse.de
- fixed filelist
-------------------------------------------------------------------
Sun Jul 31 16:33:33 CEST 2005 - cthiel@suse.de
- update to version 2.11
-------------------------------------------------------------------
Thu Feb 12 11:44:10 CET 2004 - cwh@suse.de
- updated to version 2.10
-------------------------------------------------------------------
Thu Dec 4 16:45:40 CET 2003 - cwh@suse.de
- updated to version 2.07
-------------------------------------------------------------------
Fri Aug 22 15:07:47 CEST 2003 - mjancar@suse.cz
- require the perl version we build with
-------------------------------------------------------------------
Fri Jul 18 10:21:02 CEST 2003 - cwh@suse.de
- changed from perl_site* to perl_vendor*
-------------------------------------------------------------------
Tue Jul 1 12:28:29 CEST 2003 - ro@suse.de
- use perl_process_packlist macro
-------------------------------------------------------------------
Wed Jun 18 10:53:47 CEST 2003 - coolo@suse.de
- package directories
-------------------------------------------------------------------
Mon May 26 00:12:56 CEST 2003 - ro@suse.de
- remove unpackaged files from buildroot
- add .packlist files to filelist
-------------------------------------------------------------------
Tue Jul 2 17:40:06 MEST 2002 - mls@suse.de
- remove race in .packlist generation
-------------------------------------------------------------------
Mon Oct 29 11:29:57 CET 2001 - cwh@suse.de
- new package with initial version 1.80, required by pdb
