File rubygem-bootsnap.changes of Package rubygem-bootsnap
-------------------------------------------------------------------
Fri Jun 21 09:33:29 UTC 2024 - Dan Čermák <dan.cermak@posteo.net>
- # 1.18.3
* Fix the cache corruption issue in the revalidation feature. See #474.
The cache revalidation feature remains opt-in for now, until it is more battle tested.
# 1.18.2
* Disable stale cache entries revalidation by default as it seems to cause cache corruption issues. See #471 and #474.
Will be re-enabled in a future version once the root cause is identified.
* Fix a potential compilation issue on some systems. See #470.
# 1.18.1
* Handle `EPERM` errors when opening files with `O_NOATIME`.
# 1.18.0
* `Bootsnap.instrumentation` now receive `:hit` events.
* Add `Bootsnap.log_stats!` to print hit rate statistics on process exit. Can also be enabled with `BOOTSNAP_STATS=1`.
* Revalidate stale cache entries by digesting the source content.
This should significantly improve performance in environments where `mtime` isn't preserved (e.g. CI systems doing a git clone, etc).
See #468.
* Open source files and cache entries with `O_NOATIME` when available to reduce disk accesses. See #469.
* `bootsnap precompile --gemfile` now look for `.rb` files in the whole gem and not just the `lib/` directory. See #466.
-------------------------------------------------------------------
Mon Jan 29 13:47:58 UTC 2024 - Dan Čermák <dan.cermak@posteo.net>
- New upstream release 1.17.1, see bundled CHANGELOG.md
-------------------------------------------------------------------
Thu Nov 2 15:40:16 UTC 2023 - Dan Čermák <dan.cermak@posteo.net>
- # 1.17.0
* Ensure `$LOAD_PATH.dup` is Ractor shareable to fix an conflit with `did_you_mean`.
* Allow to ignore direcotries using absolute paths.
* Support YAML and JSON CompileCache on TruffleRuby.
* Support LoadPathCache on TruffleRuby.
# 1.16.0
* Use `RbConfig::CONFIG["rubylibdir"]` instead of `RbConfig::CONFIG["libdir"]` to check for stdlib files. See #431.
* Fix the cached version of `YAML.load_file` being slightly more permissive than the default `Psych` one. See #434.
`Date` and `Time` values are now properly rejected, as well as aliases.
If this causes a regression in your application, it is recommended to load *trusted* YAML files with `YAML.unsafe_load_file`.
-------------------------------------------------------------------
Wed Dec 7 11:13:46 UTC 2022 - Stephan Kulow <coolo@suse.com>
updated to version 1.15.0
see installed CHANGELOG.md
# 1.15.0
* Add a readonly mode, for environments in which the updated cache wouldn't be persisted. See #428 and #423.
# 1.14.0
* Require Ruby 2.6.
* Add a way to skip directories during load path scanning.
If you have large non-ruby directories in the middle of your load path, it can severely slow down scanning.
Typically this is a problem with `node_modules`. See #277.
* Fix `Bootsnap.unload_cache!`, it simply wouldn't work at all becaue of a merge mistake. See #421.
-------------------------------------------------------------------
Thu Aug 4 12:59:41 UTC 2022 - Stephan Kulow <coolo@suse.com>
updated to version 1.13.0
see installed CHANGELOG.md
# 1.13.0
* Stop decorating `Kernel.load`. This used to be very useful in development because the Rails "classic" autoloader
was using `Kernel.load` in dev and `Kernel.require` in production. But Zeitwerk is now the default, and it doesn't
use `Kernel.load` at all.
People still using the classic autoloader might want to stick to `bootsnap 1.12`.
* Add `Bootsnap.unload_cache!`. Applications can call it at the end of their boot sequence when they know
no more code will be loaded to reclaim a bit of memory.
-------------------------------------------------------------------
Mon Jun 13 16:52:37 UTC 2022 - Manuel Schnitzer <mschnitzer@suse.com>
- updated to version 1.12.0
* `bootsnap precompile` CLI will now also precompile `Rakefile` and `.rake` files.
* Stop decorating `Module#autoload` as it was only useful for supporting Ruby 2.2 and older.
* Remove `uname` and other patform specific version from the cache keys. `RUBY_PLATFORM + RUBY_REVISION` should be
enough to ensure bytecode compatibility. This should improve caching for alpine based setups. See #409.
-------------------------------------------------------------------
Thu Mar 10 15:43:33 UTC 2022 - Manuel Schnitzer <mschnitzer@suse.com>
- updated to version 1.11.1
* Fix the `can't modify frozen Hash` error on load path cache mutation. See #411.
# 1.11.0
* Drop dependency on `fileutils`.
* Better respect `Kernel#require` duck typing. While it almost never comes up in practice, `Kernel#require`
follow a fairly intricate duck-typing protocol on its argument implemented as `rb_get_path(VALUE)` in MRI.
So when applicable we bind `rb_get_path` and use it for improved compatibility. See #396 and #406.
* Get rid of the `Kernel.require_relative` decorator by resolving `$LOAD_PATH` members to their real path.
This way we handle symlinks in `$LOAD_PATH` much more efficiently. See #402 for the detailed explanation.
* Drop support for Ruby 2.3 (to allow getting rid of the `Kernel.require_relative` decorator).
-------------------------------------------------------------------
Tue Feb 15 07:24:24 UTC 2022 - Stephan Kulow <coolo@suse.com>
updated to version 1.10.3
see installed CHANGELOG.md
# 1.10.3
* Fix Regexp and Date type support in YAML compile cache. (#400)
* Improve the YAML compile cache to support `UTF-8` symbols. (#398, #399)
[The default `MessagePack` symbol serializer assumes all symbols are ASCII](https://github.com/msgpack/msgpack-ruby/pull/211),
because of this, non-ASCII compatible symbol would be restored with `ASCII_8BIT` encoding (AKA `BINARY`).
Bootsnap now properly cache them in `UTF-8`.
Note that the above only apply for actual YAML symbols (e..g `--- :foo`).
The issue is still present for string keys parsed with `YAML.load_file(..., symbolize_names: true)`, that is a bug
in `msgpack` that will hopefully be solved soon, see: https://github.com/msgpack/msgpack-ruby/pull/246
* Entirely disable the YAML compile cache if `Encoding.default_internal` is set to an encoding not supported by `msgpack`. (#398)
`Psych` coerce strings to `Encoding.default_internal`, but `MessagePack` doesn't. So in this scenario we can't provide
YAML caching at all without returning the strings in the wrong encoding.
This never came up in practice but might as well be safe.
-------------------------------------------------------------------
Tue Jan 25 06:40:49 UTC 2022 - Stephan Kulow <coolo@suse.com>
updated to version 1.10.2
see installed CHANGELOG.md
# 1.10.2
* Reduce the `Kernel.require` extra stack frames some more. Now bootsnap should only add one extra frame per `require` call.
* Better check `freeze` option support in JSON compile cache.
Previously `JSON.load_file(..., freeze: true)` would be cached even when the msgpack version is missing support for it.
# 1.10.1
* Fix `Kernel#autoload`'s fallback path always being executed.
* Consider `unlink` failing with `ENOENT` as a success.
# 1.10.0
* Delay requiring `FileUtils`. (#285)
`FileUtils` can be installed as a gem, so it's best to wait for bundler to have setup the load path before requiring it.
* Improve support of Psych 4. (#392)
Since `1.8.0`, `YAML.load_file` was no longer cached when Psych 4 was used. This is because `load_file` loads
in safe mode by default, so the Bootsnap cache could defeat that safety.
Now when precompiling YAML files, Bootsnap first try to parse them in safe mode, and if it can't fallback to unsafe mode,
and the cache contains a flag that records wether it was generated in safe mode or not.
`YAML.unsafe_load_file` will use safe caches just fine, but `YAML.load_file` will fallback to uncached YAML parsing
if the cache was generated using unsafe parsing.
* Minimize the Kernel.require extra stack frames. (#393)
This should reduce the noise generated by bootsnap on `LoadError`.
# 1.9.4
* Ignore absolute paths in the loaded feature index. (#385)
This fixes a compatibility issue with Zeitwerk when Zeitwerk is loaded before bootsnap. It also should
reduce the memory usage and improve load performance of Zeitwerk managed files.
* Automatically invalidate the load path cache whenever the Ruby version change. (#387)
This is to avoid issues in case the same installation path is re-used for subsequent ruby patch releases.
-------------------------------------------------------------------
Tue Dec 21 22:47:57 UTC 2021 - Manuel Schnitzer <mschnitzer@suse.com>
- updated to version 1.9.3
# 1.9.3
* Only disable the compile cache for source files impacted by [Ruby 3.0.3 [Bug 18250]](https://bugs.ruby-lang.org/issues/18250).
This should keep the performance loss to a minimum.
# 1.9.2
* Disable compile cache if [Ruby 3.0.3's ISeq cache bug](https://bugs.ruby-lang.org/issues/18250) is detected.
AKA `iseq.rb:13 to_binary: wrong argument type false (expected Symbol)`
* Fix `Kernel.load` behavior: before `load 'a'` would load `a.rb` (and other tried extensions) and
wouldn't load `a` unless `development_mode: true`, now only `a` would be loaded and files with
extensions wouldn't be.
-------------------------------------------------------------------
Sat Oct 9 09:04:24 UTC 2021 - Manuel Schnitzer <mschnitzer@suse.com>
- updated to version 1.9.1
* Removed a forgotten debug statement in JSON precompilation
-------------------------------------------------------------------
Wed Aug 25 05:06:34 UTC 2021 - Manuel Schnitzer <mschnitzer@suse.com>
- updated to version 1.7.7
* Fix `require_relative` in evaled code on latest ruby 3.1.0-dev. (#366)
-------------------------------------------------------------------
Thu Jul 29 08:40:13 UTC 2021 - Manuel Schnitzer <mschnitzer@suse.com>
- updated to version 1.7.6
* Fix reliance on `set` to be required.
* Fix `Encoding::UndefinedConversionError` error for Rails applications when precompiling cache. (#364)
-------------------------------------------------------------------
Fri May 14 16:00:26 UTC 2021 - Manuel Schnitzer <mschnitzer@suse.com>
- updated to version 1.7.5
# 1.7.5
* Handle a regression of Ruby 2.7.3 causing Bootsnap to call the deprecated `untaint` method. (#360)
* Gracefully handle read-only file system as well as other errors preventing to persist the load path cache. (#358)
# 1.7.4
* Stop raising errors when encoutering various file system errors. The cache is now best effort,
if somehow it can't be saved, bootsnapp will gracefully fallback to the original operation (e.g. `Kernel.require`).
(#353, #177, #262)
-------------------------------------------------------------------
Tue Mar 23 06:00:28 UTC 2021 - Manuel Schnitzer <mschnitzer@suse.com>
- updated to version 1.7.3
* Disable YAML precompilation when encountering YAML tags. (#351)
-------------------------------------------------------------------
Mon Feb 15 13:32:13 UTC 2021 - Manuel Schnitzer <mschnitzer@suse.com>
- updated to version 1.7.2
* Fix compatibility with msgpack < 1. (#349)
-------------------------------------------------------------------
Sat Feb 6 11:27:04 UTC 2021 - Manuel Schnitzer <mschnitzer@suse.com>
- updated to version 1.7.1
* no changelog found in CHANGELOG.md
-------------------------------------------------------------------
Tue Nov 10 21:00:10 UTC 2020 - Manuel Schnitzer <mschnitzer@suse.com>
- updated to version 1.5.1
* Workaround a Ruby bug in InstructionSequence.compile_file. (#332)
-------------------------------------------------------------------
Sun Nov 1 14:46:59 UTC 2020 - Manuel Schnitzer <mschnitzer@suse.com>
- updated to version 1.4.9
* [Windows support](https://github.com/Shopify/bootsnap/pull/319)
* [Fix potential crash](https://github.com/Shopify/bootsnap/pull/322)
-------------------------------------------------------------------
Sat Aug 22 12:59:34 UTC 2020 - Manuel Schnitzer <mschnitzer@suse.com>
- updated to version 1.4.8
# 1.4.8
* [Prevent FallbackScan from polluting exception cause](https://github.com/Shopify/bootsnap/pull/314)
# 1.4.7
* Various performance enhancements
* Fix race condition in heavy concurrent load scenarios that would cause bootsnap to raise
-------------------------------------------------------------------
Tue Mar 3 11:01:39 UTC 2020 - Manuel Schnitzer <mschnitzer@suse.com>
- updated to version 1.4.6
* no changelog found
-------------------------------------------------------------------
Tue Nov 12 16:42:47 UTC 2019 - Manuel Schnitzer <mschnitzer@suse.com>
- updated to version 1.4.5
* MRI 2.7 support
* Fixed concurrency bugs
-------------------------------------------------------------------
Sun May 5 09:19:48 UTC 2019 - Stephan Kulow <coolo@suse.com>
- updated to version 1.4.4
see installed CHANGELOG.md
# 1.4.4
* Disable ISeq cache in `bootsnap/setup` by default in Ruby 2.5
# 1.4.3
* Fix some cache permissions and umask issues after switch to mkstemp
-------------------------------------------------------------------
Fri Mar 29 05:56:31 UTC 2019 - Stephan Kulow <coolo@suse.com>
- updated to version 1.4.2
see installed CHANGELOG.md
# 1.4.2
* Fix bug when removing features loaded by relative path from `$LOADED_FEATURES`
* Fix bug with propagation of `NameError` up from nested calls to `require`
-------------------------------------------------------------------
Sat Mar 2 15:05:33 UTC 2019 - Stephan Kulow <coolo@suse.com>
- updated to version 1.4.1
see installed CHANGELOG.md
# 1.4.1
* Don't register change observers to frozen objects.
# 1.4.0
* When running in development mode, always fall back to a full path scan on LoadError, making
bootsnap more able to detect newly-created files. (#230)
* Respect `$LOADED_FEATURES.delete` in order to support code reloading, for integration with
Zeitwerk. (#230)
* Minor performance improvement: flow-control exceptions no longer generate backtraces.
* Better support for requiring from environments where some features are not supported (especially
JRuby). (#226)k
* More robust handling of OS errors when creating files. (#225)
-------------------------------------------------------------------
Mon Sep 17 09:29:37 UTC 2018 - mschnitzer@suse.com
- updated to version 1.3.2
* Fix Spring + Bootsnap incompatibility when there are files with similar names.
* Fix `YAML.load_file` monkey patch to keep accepting File objects as arguments.
* Fix the API for `ActiveSupport::Dependencies#autoloadable_module?`.
* Some performance improvements.
-------------------------------------------------------------------
Wed Jul 11 18:00:51 UTC 2018 - factory-auto@kulow.org
- updated to version 1.3.1
see installed CHANGELOG.md
# 1.3.1
* Change load path scanning to more correctly follow symlinks.
-------------------------------------------------------------------
Fri Jul 6 21:15:48 UTC 2018 - mschnitzer@suse.com
- Initial package release
