openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File hplip.changes of Package hplip (Revision 20471f73fc489a461861cc37b2efc114)

Currently displaying revision 20471f73fc489a461861cc37b2efc114 , Show latest

-------------------------------------------------------------------
Thu Sep 12 10:47:40 CEST 2013 - jsmeix@suse.de

- Version upgrade to 3.13.9:
  Several more supported printers and all-in-one devices.
  Some bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- fix-uninitialized-variables.diff is obsolete since
  version 3.13.9 because it is fixed in the source.

-------------------------------------------------------------------
Tue Sep 10 14:44:46 CEST 2013 - jsmeix@suse.de

- change-udev-rules.diff: Added rule that only uploads firmware
  into printers that need it by calling only hp-firmware, see
  https://bugs.launchpad.net/bugs/1220628

-------------------------------------------------------------------
Wed Sep  4 10:09:00 CEST 2013 - jsmeix@suse.de

- Version upgrade to 3.13.8:
  Added support for Avahi network printer browsing.
  Using SLP protocol by default to browse printer in hp-setup.
  Some more supported printers and all-in-one devices.
  Some bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Tue Jul 23 14:28:37 CEST 2013 - jsmeix@suse.de

- Version upgrade to 3.13.7:
  A few more supported printers and all-in-one devices.
  Some bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- hplip-3.9.8-CVE-2010-4267.patch is no longer needed because
  it is fixed in the upstream sources in HPLIP version 3.13.7
  (see the entry dated "Thu Jan 13 16:29:01 CET 2011" below).

-------------------------------------------------------------------
Tue Jul  9 16:18:35 CEST 2013 - jsmeix@suse.de

- deactivate-add_group-function.diff deactivates the add_group
  function that would add the groups ('lp') to user which would
  cause security issues see https://bugs.launchpad.net/bugs/1197416
  that would happen in any case via a fallback command in an "else"
  clause even if this functionality was explicitly disabled in
  distros.dat via neither-add_user_to_group-nor-open_mdns_port.diff
- neither-add_user_to_group-nor-open_mdns_port.diff
  deactivates add_user_to_group and open_mdns_port
  in distros.dat for SUSE distros to avoid security issues
  when normal users get added to system groups 'lp' and 'sys'
  see https://bugs.launchpad.net/bugs/1197416
  and https://bugs.launchpad.net/bugs/1112306 and
  to avoid security issues when ports in the firewall get opened
  see https://bugs.launchpad.net/bugs/426161
- Adapted change-udev-rules.diff so that it applies to
  the HPLIP 3.13.6 sources.
- no-hplip_cron.diff is no longer needed because there is
  no longer any "cron" stuff in HPLIP version 3.13.6
- Version upgrade to 3.13.6:
  A few more supported printers and all-in-one devices.
  Fix for firmware download during plug and play.
  Supported CUPS 1.6 IPP Private Structure changes.
  Some other bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- Version upgrade to 3.13.5:
  Several more supported printers and all-in-one devices.
  Added 56-hpmud.rules and removed 56-hpmud_support,
  86-hpmud_plugin, 56-hpmud_add_printer, 55-hpmud
  and 40-hplip rules.
  Added hplip-printer@.service to support systemd services
  in udev for OpenSUSE 12.3.
  Some other bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Tue Apr 16 12:05:38 CEST 2013 - jsmeix@suse.de

- Version upgrade to 3.13.4:
  Several more supported printers and all-in-one devices.
  Fixed toolbox.py crash (KeyError in is_auto_installer_support).
  Several other bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Thu Mar 14 15:13:09 UTC 2013 - meissner@suse.com

- use URLs in Source tags
- added gpg signature checking to %prep.

-------------------------------------------------------------------
Tue Mar 12 11:23:11 CET 2013 - jsmeix@suse.de

- Version upgrade to 3.13.3:
  Mainly a bugfix release.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Wed Mar  6 09:41:02 CET 2013 - jsmeix@suse.de

- Removed hp-systray.wrapper because the reason for it
  is no longer in compliance with HPLIP upstream intentions
  (see SUSE Bugzilla bnc#649280 starting at comment#10).

-------------------------------------------------------------------
Fri Feb 15 15:31:28 CET 2013 - jsmeix@suse.de

- Version upgrade to 3.13.2:
  Several more supported printers and all-in-one devices
  (in particular several "HP Officejet Pro X..." models).
  New self diagnose and healing utility "hp-doctor"
  but "hp-check-plugin" is no longer provided.
  Several bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- Adapted change-udev-rules.diff disable-chgrp_lp.diff
  and no-hplip_cron.diff for HPLIP 3.13.2.

-------------------------------------------------------------------
Thu Jan 24 14:51:24 CET 2013 - jsmeix@suse.de

- Create /var/log/hp/tmp/ directory that is needed by hp-sendfax
  as a workaround until HPLIP upstream implemented it correctly
  see https://bugs.launchpad.net/bugs/1016507 (bnc#800312).

-------------------------------------------------------------------
Thu Nov 29 15:27:51 CET 2012 - jsmeix@suse.de

- Version upgrade to 3.12.11:
  Several more supported printers and all-in-one devices
  (in particular several "HP LaserJet Enterprise" models).
  Several bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- fix-no-return-in-nonvoid-function.diff is no longer needed
  because it is now completely fixed in the upstream sources.
- disable-chgrp_lp.diff replaces no-chgrp_lp_hplip_Logdir.diff
  and does basically the same but is adapted for HPLIP 3.12.11.
- Adapted no-hplip_cron.diff for HPLIP 3.12.11.

-------------------------------------------------------------------
Wed Oct 10 14:23:14 CEST 2012 - jsmeix@suse.de

- Bugfix version upgrade to 3.12.10a:
  The 'a' does not mean 'alpha' but "first bugfix of 3.12.10".
  Fixed crash in HP Device Manager and System Tray due to
  ValueError exception in HPLIP upgrade functionality, see
  https://bugs.launchpad.net/hplip/+bug/1064889 (bnc#784173).
- Added "chmod a+x ... usr/share/hplip/fax/pstotiff" because
  "make install" installs it only with -rw-r--r-- permissions
  so that when the CUPS filter usr/lib/cups/filter/pstotiff
  which is a link to usr/share/hplip/fax/pstotiff is called,
  it cannot execute usr/share/hplip/fax/pstotiff, see
  https://bugs.launchpad.net/hplip/+bug/1064247 (bnc#783810).

-------------------------------------------------------------------
Fri Oct  5 11:51:35 CEST 2012 - jsmeix@suse.de

- Version upgrade to 3.12.10:
  Perhaps HP binary plugin installation failure fixed upstream
  see https://bugs.launchpad.net/hplip/+bug/1048732
  A few more supported printers and all-in-one devices.
  A few bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Thu Oct  4 13:37:56 CEST 2012 - jsmeix@suse.de

- no-hplip_cron.diff deactivates the "cron" stuff in Makefile.am
  because it lets build fail on SLE11 products (possibly an
  autoconf issue) and we (SUSE) do not allow to install files
  like /etc/cron.daily/hplip_cron via RPMs. Instead hplip_cron
  is provided as /usr/share/doc/packages/hplip/hplip_cron
- The /var/lib/hp directory is created everywhere except on
  openSUSE 12.2 and later versions (perhaps also an autoconf
  issue) so that it is created in the install section if it
  does not exist as a simple and fail-safe workaround
  see https://bugs.launchpad.net/bugs/1018303
  and (bnc#780413).
- Adapted change-udev-rules.diff so that it applies to
  the HPLIP 3.12.9 sources.

-------------------------------------------------------------------
Fri Sep 28 12:42:33 UTC 2012 - mmeister@suse.com

- Adapted fix-no-return-in-nonvoid-function.diff because
  HP's upstream fix is insufficient (not 64-bit safe),
  see https://bugs.launchpad.net/hplip/+bug/1017496
- Adapted no-chgrp_lp_hplip_Logdir.diff so that it
  applies to the HPLIP 3.12.9 sources.

------------------------------------------------------------------
Fri Sep 28 08:20:55 UTC 2012 - mmeister@suse.com

- Version upgrade to 3.12.9:
  User can collect logs by running 'hp-logcapture' command
  for any issue in print/scan/fax functionality.
  Logs get stored in /var/log/hp/tmp.
  Several more supported printers and all-in-one devices.
  Several bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Thu Jun 28 12:00:28 CEST 2012 - jsmeix@suse.de

- Provide the /var/lib/hp directory that is required in particular
  by hp-plugin (see https://bugs.launchpad.net/hplip/+bug/1018303)
  in the hplip-hpijs package to be on the safe side because
  hplip-hpijs is the minimal (printing-only) way to use HPLIP.

-------------------------------------------------------------------
Mon Jun 25 15:56:54 UTC 2012 - mail@philipp-wagner.com

- Add libusb 1.0 as dependency. If necessary building with
  libusb 0.1 would be possible as well by setting a configure
  flag.

-------------------------------------------------------------------
Mon Jun 25 14:42:59 UTC 2012 - mail@philipp-wagner.com

- fix-no-return-in-nonvoid-function.diff fixes compiler warnings
  causing a no-return-in-nonvoid-function error during the build.
  An upstream bug report is open at
  https://bugs.launchpad.net/hplip/+bug/1017496

-------------------------------------------------------------------
Mon Jun 25 09:47:53 UTC 2012 - mail@philipp-wagner.com

- Upgraded to version 3.12.6:
  'hp-check' tool when run with "--fix" option resolves missing
  dependencies/groups/plugin and disable SELinux.
  Added PIN to PRINT support for HP Color LaserJet CM4540 MFP.
  libusb-1.0 support added.
  Several more supported printers and all-in-one devices.
  Several bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Tue Apr 24 13:51:03 CEST 2012 - jsmeix@suse.de

-  hplip.SuSEfirewall2 is no longer provided
   (see SUSE Bugzilla bnc#757354 comment #10).

-------------------------------------------------------------------
Thu Apr 12 15:14:18 CEST 2012 - jsmeix@suse.de

- Upgraded to version 3.12.4:
  Uninstall Support: User can uninstall complete HPLIP package
  by running "hp-uninstall" command.
  Upgrade Support: Settings can be configured using
  "hp-systray -> settings -> Update settings" for notification
  of newer version of HPLIP release. User can also upgrade to
  latest version by running "hp-upgrade" command.
  Queue Analyzer: Print/Fax queues can be analyzed by
  running "hp-diagnose-queues" command or by clicking
  on "Diagnose Queues" from toolbox.
  Several more supported printers and all-in-one devices.
  Several bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- Removed hp-toolbox.wrapper because the reason for it
  is no longer valid (see SUSE Bugzilla bnc#755820).
- Added "BuildRequires: python-cups" to get special
  RPM Provides tags for the printers supported by
  this package (see SUSE Bugzilla bnc#735865).

-------------------------------------------------------------------
Wed Feb  8 10:22:30 CET 2012 - jsmeix@suse.de

- Upgraded to version 3.12.2:
  Fixed digital signature mismatch issue for plugin download.
  Removed unsupported features (Water Mark overlay, Job Storage,
  PIN 2 Print) from the PS PPDs.
  Several more supported printers and all-in-one devices.
  A few bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Thu Jan 12 17:24:22 CET 2012 - jsmeix@suse.de

- Upgraded to version 3.11.12:
  Auto-detection and installation of missing plug-ins.
  Designed tool to detect the missing plugin files and intimate
  user about it and giving the path forward to install it.
  SYSFS is replaced by ATTRS in udev rules.
  Uses D-Bus from separate threads without locking.
  Several more supported printers and all-in-one devices.
  Several bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- change-udev-rules.diff changes ATTRS to ATTR (bnc#436085).
- no-chgrp_lp_hplip_Logdir.diff deactivates
  the "chgrp lp -R /var/log/hp" in Makefile.am because
  during install this results "Operation not permitted".
  This is done in the files section via attr(0774,root,lp)
  where mode 0774 matches to what is set in Makefile.am.

-------------------------------------------------------------------
Fri Oct 28 06:08:53 UTC 2011 - badshah400@gmail.com

- Install icons of various sizes in hicolor icon directory for
  better appearance in gnome-shell (bnc#713902).
- Add hicolor-icon-theme BuildRequires to own the hicolor icon
  directory correctly and install icons in there
- Use appropriate icon theme macros in post scripts
- Modified hplip.desktop to use these hicolor icons
- In hplip.desktop replace the category "Settings" by "System" to
  make it appear under the correct group "System Tools" rather
  than "Others" in desktop menus.

-------------------------------------------------------------------
Sat Oct 15 04:47:01 UTC 2011 - coolo@suse.com

- add libtool as buildrequire to make the spec file more reliable

-------------------------------------------------------------------
Thu Oct 13 13:57:46 UTC 2011 - vuntz@opensuse.org

- Split the sane driver in a hplip-sane subpackage, so that it's
  not necessary to install the full hplip tools to use an
  all-in-one HP printer. See bnc#723870.

-------------------------------------------------------------------
Tue Oct  4 12:44:11 CEST 2011 - jsmeix@suse.de

- Upgraded to version 3.11.10:
  Fixed insecure tmp file handling in hpcupsfax.cpp CVE-2011-2722
  see https://bugs.launchpad.net/hplip/+bug/809904 (bnc#704608).
  New tech classes for HP OfficeJet Pro 8100,
  HP Deskjet 3070 B611 series and HP Photosmart 7510 e-All-in-One.
  Added new subtech class for HP Photosmart 6510 e-All-in-one.
  Modified the error message which was displayed in case
  of missing .asc file for manual plug-in install.
  Several more supported printers and all-in-one devices.
  Several bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Fri Aug 12 10:36:13 CEST 2011 - jsmeix@suse.de

- Upgraded to version 3.11.7:
  A few more supported printers and all-in-one devices.
  Several bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- Because foomatic-rip-hplip has CVE-2011-2697 (bnc#698451)
  plus a leftover in CVE-2004-0801 (bnc#59233)
  foomatic-rip-hplip is no longer installed and foomatic-rip
  from the foomatic-filters RPM is used instead and the
  "cupsFilter" entries in the PPDs are changed accordingly.
  To be backward compatible with PPDs in /etc/cups/ppd/
  for existing print queues a compatibility link
  /usr/lib/cups/filter/foomatic-rip-hplip
  which points to foomatic-rip is installed.
- The DefaultPageSize in the PPDs is no longer set to A4
  if A4 is an available PageSize choice but left "as is"
  because the DefaultPageSize in the PPD templates in
  /usr/share/cups/model/ does not matter because the cupsd
  sets the DefaultPageSize for PPDs in /etc/cups/ppd/
  by default according to the locale that the cupsd runs in or
  according to a DefaultPaperSize entry in /etc/cups/cupsd.conf.
- No longer "Correcting or removing non-working PPDs..."
  because none of those cases which were fixed still exist
  (i.e. all those cases are meanwhile fixed upstream).

-------------------------------------------------------------------
Fri May 13 12:20:10 CEST 2011 - jsmeix@suse.de

- Upgraded to version 3.11.5:
  Added LEDM ADF Scan support.
  Added LEDM Wireless support.
  Some more supported printers and all-in-one devices.
  It may fix the inverted/wrong color problem in HPCUPS
  (see Novell/openSUSE Bugzilla bnc #692905).
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Tue Mar 29 16:24:36 CEST 2011 - jsmeix@suse.de

- Upgraded to version 3.11.3a:
  Fixed hp-plugin plugin download error (no Suse bug), see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Fri Mar 18 11:29:09 CET 2011 - jsmeix@suse.de

- Upgraded to version 3.11.3:
  New device class StingrayOJ for HP OfficeJet 100 Mobile L411.
  New filter hpps (HP PS filter for PostScript printers) currently
  only used via hp-officejet_pro_8000_enterprise_a811a-ps.ppd.gz
  Some more supported printers and all-in-one devices.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Tue Feb  1 16:19:21 CET 2011 - jsmeix@suse.de

- Updated to version 3.11.1:
  New encapsulation format for LJZJStream class.
  Alignment of cartridges over LEDM (Low End Data Model).
  LEDM dynamic scan resolution.
  New fax protocol (Low End Data Model) support.
  ADF and color scan for some HP LaserJet Pro and MFP devices.
  Some more supported all-in-one devices.
  Many bug fixes (no Suse bugs).
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- Adapted change-udev-rules.diff for version 3.11.1
  because the "DesignJet product (0x03f0xx14)" was added.

-------------------------------------------------------------------
Thu Jan 13 16:29:01 CET 2011 - jsmeix@suse.de

-  hplip-3.9.8-CVE-2010-4267.patch fixes a remote buffer overflow
   (CVE-2010-4267 and Novell/Suse Bugzilla bnc#336658).

-------------------------------------------------------------------
Wed Dec 29 15:52:56 UTC 2010 - gber@opensuse.org

- Use more appropriate categories for hplip.desktop
  'Settings HardwareSettings Printing' instead of 'System Monitor'

-------------------------------------------------------------------
Fri Dec  3 10:42:05 CET 2010 - jsmeix@suse.de

- Removed explicite RPM requirement for pyxml. At least since
  openSUSE 11.1 and SLE11 pyxml is no longer required (pyxml was
  required e.g. for openSUSE 10.3 and SLE10, see the entry below
  dated "Wed Apr  2 14:40:57 CEST 2008") but meanwhile python-xml
  alone is sufficient for "import xml.parsers.expat"
  (see Novell/openSUSE Bugzilla bnc#656779 comment #3).
- Added "Obsoletes: hplip-hpcups" because HPLIP does not work
  if the openSUSE packages hplip and hplip-hpijs are installed
  together with a leftover PackMan package hplip-hpcups
  (see Novell/openSUSE Bugzilla bnc#515005 comment #17).
- Do not pollute the build log file with zillions of meaningless
  messages while "General tests and adjustments for all PPDs"
  (compare the OpenPrintingPPDs.spec file).

-------------------------------------------------------------------
Wed Oct 27 16:34:11 CEST 2010 - jsmeix@suse.de

- Added hp-systray.wrapper which is called
  via /etc/xdg/autostart/hplip-systray.desktop
  to increase desktop startup speed so that the purpose
  of this hp-systray.wrapper is different to the
  entry below dated "Tue Apr  8 14:56:53 CEST 2008".
  hp-systray.wrapper tests via "lpstat" if a 'hp:/...'
  print queue exists and exits otherwise.
  This avoids that hp-systray with all its Python stuff must be
  loaded when the desktop starts up only to let hp-systray do
  its built-in test and exit if there is no HPLIP print queue
  (see Novell/openSUSE Bugzilla bnc#649280).
- Updated to version 3.10.9:
  New Scan protocol (Low End Data Model) support.
  Many more supported all-in-one devices.
  Many bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- Updated to version 3.10.6:
  New protocol support (LEDM) for device status over Network
  and USB.
  Some more supported all-in-one devices.
  Several bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- Updated to version 3.10.5:
  Fixed "libusb couldn't open USB device, Permission denied"
  error message in openSUSE.
  Several more supported all-in-one devices.
  Several bug fixes.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Wed Sep 15 08:58:09 UTC 2010 - aj@suse.de

- Change BuildRequires for sane-backends devel split.

-------------------------------------------------------------------
Thu Apr  1 12:40:47 CEST 2010 - jsmeix@suse.de

- Updated to version 3.10.2:
  The hpcups driver is again updated to better align with
  the product specifications for various printer models.
  Several more supported all-in-one devices.
  Several bug fixes (no Suse bugs).
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- Updated to version 3.9.12:
  The hpcups driver is updated to better align with the
  product specifications for various printer models.
  Several more supported printers.
  Several bug fixes (no Suse bugs).
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- Updated to version 3.9.10:
  The hpcups driver has been re-written. It does no longer do
  bi-directional IO. Printer specific settings are no longer
  hard coded, but are controlled by the PPD file.
  Many more supported printers and all-in-one devices.
  Several bug fixes (no Suse bugs).
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- hpcups.drv.in-3.9.8-reorder.patch and
  hpcups-ppds-3.9.8-reorder.tar.bz2 are obsolete
  because it is fixed in the source.
- create_hal_global_fdi_from_hpmud_rules is obsolete
  because HAL is no longer used to manage ACLs
  (see Novell/Suse Bugzilla bnc#542473 comment#13).
- change-udev-rules.diff fixes now also 56-hpmud_support.rules
  (see for example Novell/Suse Bugzilla bnc#577035) and
  it should trigger udev's generic ACL support for SANE
  via 'ENV{libsane_matched}="yes"' in 55-hpmud.rules
  (see Novell/Suse Bugzilla bnc#542473 comment#14).
  Perhaps the latter could be better achieved with the
  configure option --enable-udev-acl-rules (default=no)
  which installs 40-hplip.rules instead of 55-hpmud.rules
  but this was not at all tested up to now and it is
  likely not backward compatible (e.g. for openSUSE 11.2).

-------------------------------------------------------------------
Thu Oct 15 15:52:41 CEST 2009 - jsmeix@suse.de

- Also moved /usr/share/hplip/data/models/models.dat
  and /etc/hp/hplip.conf to the hplip-hpijs sub-package
  so that the "hp" backend can autodetect printers
  (see Novell/Suse Bugzilla bnc#546856 comment#10).

-------------------------------------------------------------------
Thu Oct 15 11:14:28 CEST 2009 - jsmeix@suse.de

- In the hplip-hpijs sub-package made weak package dependencies
  even weaker to avoid bloating of minimal installations. Now
  the hplip-hpijs sub-package only "Enhances: ghostscript_any"
  and "Suggests: hplip" (see Novell/Suse Bugzilla bnc#546893).
- Enlarged hplip-hpijs to be useful for a CUPS print queue.
  Moved the following files from the hplip main package
  to the hplip-hpijs sub-package: cups/backend/hp,
  cups/filter/foomatic-rip-hplip, cups/filter/hpcac,
  cups/filter/hpcups, cups/filter/hplipjs,
  and all PPD files (see Novell/Suse Bugzilla bnc#546856).

-------------------------------------------------------------------
Wed Sep 16 14:59:30 CEST 2009 - jsmeix@suse.de

- hpcups.drv.in-3.9.8-reorder.patch addresses two issues
  in the 3.9.8 hpcups.drv.in file from which dynamic PPDs
  are generated.
  It re-orders common paper sizes so that normal, fullbleed
  and duplex papers sizes are grouped together in the PPD.
  It changes the LJColor device class from RGBW to RGB
  color space. The K band was not being printed by hpcups.
- The hpcups-ppds-3.9.8-reorder.tar.bz2 source file contains
  the matching static PPDs which are fixed according to what
  hpcups.drv.in-3.9.8-reorder.patch fixes for dynamic PPDs.

-------------------------------------------------------------------
Thu Aug  6 10:48:36 CEST 2009 - jsmeix@suse.de

- The hplip.SuSEfirewall2 source file provides support
  to open UDP ports 5353(mdns) and 427(svrloc) for mDNS support
  according to the init-suse-firewall in the tar ball
  (see Novell/Suse Bugzilla bnc#528819).
- Updated to version 3.9.8:
  Added mDNS/Bonjour support.
  Enabled mDNS as the default network search mechanism.
  Added front-end support for mDNS/Bonjour in setup.
  Added hpmud support for mDNS.
  The tar ball provides a init-suse-firewall init script 
  for mDNS support which is not included in the RPM.
  Fixed wificonfig associate issue when called from hp-setup.
  Added 40-hplip.rules to the tar ball for distros with
  udev ACL support. Use configure option --enable-udev-acl-rules
  to install 40-hplip.rules instead of 55-hpmud.rules.
  Fixed Normal Grayscale on DJ8xx and DJ8x5 for HPCUPS.
  Added -lsane link option for libsane-hpaio in Makefile.
  Many more supported printers and all-in-one devices.
  Many bug fixes (no Suse bugs).
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Wed Jul  1 10:28:04 CEST 2009 - jsmeix@suse.de

- Fixed hp-toolbox.wrapper by adding "..." quotation when
  calling 'test -x "$( type -p whatever )"' because
  when 'type -p whatever' fails calling 'test -x' without
  an explicite empty argument would result true
  (see Novell/Suse Bugzilla bnc#503322 comment#6).
- fix_gcc44_glib.diff is obsolete since version 3.9.6b
  because it is fixed in the source.
- Updated to version 3.9.6b:
  The new native CUPS driver (HPCUPS) is now the default
  printer driver. HPCUPS provides new paper sizes for borderless
  and duplex so that there are now HPCUPS PPDs with exact
  printable regions for normal, borderless and duplex paper sizes
  which should fix https://bugs.launchpad.net/hplip/+bug/173857
  For now HPIJS (and its matching foomatic-rip-hplip PPDs)
  are still included (HPIJS can co-exist with HPCUPS).
  A new utility 'hp-wificonfig' can pre-configure wifi-capable
  printers on a wireless network. Once pre-configured, a queue
  for the printer can be set up as usual using hp-setup.
  Renamed hp-devicesetup to hp-devicesettings.
  Added CUPS filter hpcupsfax and new hpcups fax PPDs.
  Bumped libhpmud.so.0.0.4 to libhpmud.so.0.0.5.
  Integrated --enable-lite-build (default=no) into configure.in
  which can be used to get a minimal print/scan only build with
  limited Plugin support (Novell/Suse provides the "full" build).
  Many more supported printers and all-in-one devices.
  Many bug fixes (no Suse bugs).
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Tue Jun  2 14:46:19 CEST 2009 - jsmeix@suse.de

- fix_gcc44_glib.diff fixes GCC/glibc issues, here in particular
  "invalid conversion from 'const char*' to 'char*'" errors.
  The upstream bug report is
  https://bugs.launchpad.net/hplip/+bug/382720
 
-------------------------------------------------------------------
Tue May  5 14:54:42 CEST 2009 - jsmeix@suse.de

- force-qt4-for-hp-systray-desktop.diff is obsolete because
  configure uses --enable-qt4 by default now which obsoletes
  also "Recommends: python-qt" (only python-qt4 is required).
- Updated to version 3.9.4b:
  A few bug fixes (no Suse bugs).
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- Updated to version 3.9.4:
  Added PolicyKit support. Command line tools like hp-setup,
  hp-plugin, etc. are now run as regular user.
  Added GPG digital signature support to the HPLIP plug-in
  to validate that the plug-in is not corrupted and authentic.
  Added native CUPS driver support (hpcups) currently for
  testing only and added static PPDs for hpcups.
  Some more supported printers and all-in-one devices
  (in particular a few Designjet PostScript printers).
  Many bug fixes (no Suse bugs).
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- Updated to version 3.9.2:
  Qt4 now default UI.
  Support policy change. End of support date is added to
  all HPLIP supported devices, for details see
  http://hplipopensource.com/node/314
  New file /var/lib/hp/hplip.state for runtime variable data.
  Removed any variable data from /etc/hp/hplip.conf.
  Some more supported printers and all-in-one devices.
  Major bug fixing on Qt4 solution (no Suse bugs).
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- Updated to version 2.8.12:
  From this release forward, all PPD files - even for devices
  that require a binary plug-in - will reside in the tarball
  (the "plugin PPDs" are moved into hpijs.drv).
  Preview (alpha) release of the Qt4 version of HPLIP.
  Replaced "MODE 0666" udev device permissions with
  "console permissions via HAL".
  No new supported devices.
  Several bug fixes (no Suse bugs).
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html
- Updated to version 2.8.10:
  Bumped libhpmud version for new plugin attribute.
  Many more supported printers and all-in-one devices.
  Several bug fixes (no Suse bugs).
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html    
- Updated to version 2.8.9:
  Added Qt4 configure option but Qt3 is the default.
  Many bug fixes (no Suse bugs).
  Several more supported printers, in particular
  some Compact Photo (QuickConnect) printers.
  For details see
  http://hplipopensource.com/hplip-web/release_notes.html

-------------------------------------------------------------------
Wed Dec  3 17:30:47 CET 2008 - lnussel@suse.de

- use "usb" instead of "usb_device" (bnc#438867)

-------------------------------------------------------------------
Wed Dec  3 11:18:55 CET 2008 - jsmeix@suse.de

- Moved /etc/hal/fdi/policy/10osvendor/70-hpmud.fdi
  to /usr/share/hal/fdi/information/20thirdparty/70-hpmud.fdi
  (see Novell/Suse Bugzilla bnc#438867).

-------------------------------------------------------------------
Tue Nov 18 11:48:39 CET 2008 - jsmeix@suse.de

- Let suse_update_desktop_file add X-SuSE-translate key
  to /etc/xdg/autostart/hplip-systray.desktop so that we can
  update its translations with translation-only packages
  (see Novell/Suse Bugzilla bnc#445738).

-------------------------------------------------------------------
Tue Oct 21 14:49:39 CEST 2008 - jsmeix@suse.de

- Changed change-udev-rules.diff to jump to the end
  if SUBSYSTEM!="usb" and replaced SYSFS by ATTR
  (see Novell/Suse Bugzilla bnc#436085).

-------------------------------------------------------------------
Tue Sep 16 08:35:58 CEST 2008 - jsmeix@suse.de

- Added "Recommends: hplip" to hplip-hpijs because when only
  hplip-hpijs is there, it should tell the dependency resolver
  that for usual functionality, hplip should be installed
  too (if possible).

-------------------------------------------------------------------
Thu Sep 11 08:28:02 CEST 2008 - jsmeix@suse.de

- force-qt4-for-hp-systray-desktop.diff forces Gnome and KDE
  to execute hp-systray as "hp-systray --qt4" via
  /etc/xdg/autostart/hplip-systray.desktop so that
  hp-systray docks to the notification tray of the desktops.
  Because of this the python-qt4 RPM is now required
  (see Novell/Suse Bugzilla bnc#377575).
  This additional requirement should be no problem because
  in an upcoming release HPLIP is converted over to Qt4, see
  https://bugs.launchpad.net/hplip/+bug/231978/comments/7
  and then the "Recommends: python-qt" can be dropped
  (see the entry below) but currently only hp-systray
  can be used with Qt4.

-------------------------------------------------------------------
Wed Sep 10 12:06:32 CEST 2008 - jsmeix@suse.de

- Do no longer have a hard RPM requirement for python-qt
  (now there is only "Recommends: python-qt") to be able
  to provide hplip even on a distribution without python-qt.
  Without python-qt all GUI stuff would fail but
  several /usr/bin/hp-* tools have a command line
  option to run in non-graphical mode so that the basic driver
  functionality still works even without python-qt.
- Have versioned "Obsoletes" for hpijs-standalone to meet our
  policies even if the real intention is that any installed
  version of hpijs-standalone is replaced and explain the
  unversioned "Obsoletes" for hplip17 and hplip17-hpijs
  (see Novell/Suse Bugzilla bnc#251830).

-------------------------------------------------------------------
Tue Sep  9 14:33:28 CEST 2008 - jsmeix@suse.de

- The configure option disable-foomatic-xml-install
  does no longer exist.
- Updated to version 2.8.7:
  Some bug fixes (no Suse bugs).    
  Some more supported printers.  
  For details see release_notes.html
- Updated to version 2.8.6b:
  Replaced the doc directory with an abbreviated web document
  (there is no longer hpijs.html and device_classes.html).
  Redesigned the proprietary plugin support. There is now only
  one plugin that is valid for each HPLIP release, see
  https://answers.launchpad.net/hplip/+question/30595
  Changed the hpijs.drv to support multiple products via
  multiple "Product" entries in the PPD but see
  https://bugs.launchpad.net/hplip/+bug/235148
  Several bug fixes (no Suse bugs).    
  Many more supported printers.
  For details see release_notes.html
- Updated to version 2.8.5:
  Major toolbox (HP Device Manager) revamp/refresh.
  More dbus support (live status updating).
  hp-systray will exit if no HPLIP installed queues found which
  obsoletes HPLIP-2.8.4-systray_exit_if_no_device_2.patch
  Many bug fixes (no Suse bugs).
  Several more supported printers.
  For details see release_notes.html

-------------------------------------------------------------------
Fri Sep  5 10:10:27 CEST 2008 - jsmeix@suse.de

- Keep all PPDs even if cupstestppd FAILs.
  With each CUPS version upgrade cupstestppd finds more
  and more errors so that more and more PPDs would be
  no longer included in the RPM which have been included
  before which results a regression.
  As far as we know there have been no problems at all because of
  not strictly compliant PPDs in HPLIP so that it is much better
  to provide all PPDs so that the matching printers can be used
  than to be rigorous regarding compliance to the PPD spec.

-------------------------------------------------------------------
Thu Sep  4 13:03:51 CEST 2008 - jsmeix@suse.de

- Changed the "Conflicts: hpijs-standalone" in hplip-hpijs
  to "Obsoletes: hpijs-standalone" regardless of any version.
  hplip-hpijs and hpijs-standalone both contain /usr/bin/hpijs
  so that both packages have a RPM conflict.
  But when the minimalist hpijs-standalone is to be replaced
  by the full-featured hplip, hplip requires hplip-hpijs
  and this should silently supersede hpijs-standalone
  regardless of any version (see Novell/Suse Bugzilla bnc#388149).

-------------------------------------------------------------------
Thu Aug 14 19:05:17 CEST 2008 - jsmeix@suse.de

- Removed the hplip init script which is obsolete since
  version 2.8.4 where hpssd is gone and replaced by
  hp-systray, see Novell/Suse Bugzilla bnc#390663.

-------------------------------------------------------------------
Tue Apr 29 12:21:17 CEST 2008 - jsmeix@suse.de

- Added RPM requirement for python-gobject2 because the dbus stuff
  in HPLIP requires the Python module gobject but there is no
  automated RPM requirement for python-gobject2, see
  https://answers.launchpad.net/hplip/+question/30741

-------------------------------------------------------------------
Thu Apr 10 15:55:42 CEST 2008 - jsmeix@suse.de

- HPLIP-2.8.4-systray_exit_if_no_device_2.patch lets hp-systray
  exit if the HPLIP driver seems to be not in use (i.e. if there
  is neither a 'hp:/...' nor a 'hpfax:/...' print queue), see
  https://bugs.launchpad.net/hplip/+bug/213938
  This patch obsoletes the whole hp-systray.wrapper stuff,
  see the entry below and Novell/Suse Bugzilla bnc#377885.

-------------------------------------------------------------------
Tue Apr  8 14:56:53 CEST 2008 - jsmeix@suse.de

- Added hp-systray.wrapper which is a wrapper for hp-systray
  which runs it only if there is a 'hp:/...' print queue
  and changed /etc/xdg/autostart/hplip-systray.desktop
  to run the wrapper, see Novell/Suse Bugzilla bnc#377885.

-------------------------------------------------------------------
Thu Apr  3 15:59:09 CEST 2008 - jsmeix@suse.de

- Updated to version 2.8.4:
  Elimination of all persistent startup daemons.
  The last daemon hpssd has been replaced with hp-systray.
  All interprocess communication uses now dbus.
  Therefore dbus-1-python version 0.80 or greater is required.
  PC send fax requires dbus and a running hp-systray to operate
  but hp-toolbox and hp-sendfax launch hp-systray automatically
  and there is also /etc/xdg/autostart/hplip-systray.desktop.
  When no HPLIP tools are running (e.g. hp-toolbox),
  and the user closes or disables hp-systray, 
  there will be no HPLIP processes running whatsoever.
  Many bug fixes (no Suse bugs).
  One more supported LaserJet ZJStream printers (M1120),
  one OfficeJet (J6400), and two Photosmart (C4340, B8800)
  where the latter has a new printer device class (PSB9100).
  For details see release_notes.html
- Adapted the hplip init script to provide backward compatibility:
  It still exists to avoid that printer/scanner setup tools fail 
  when they try to enable the "hplip" service but all it does
  is to stop a possibly running hpssd.

-------------------------------------------------------------------
Wed Apr  2 14:40:57 CEST 2008 - jsmeix@suse.de

- Exchanged create_hal_global_fdi_from_models.dat with
  create_hal_global_fdi_from_hpmud_rules which creates the
  global HAL 70-hpmud.fdi file during build-time from the
  55-hpmud.rules file to be in sync with the udev rules file
  and to make sure to have all possible HPLIP device IDs, see
  https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/195782
- Require the exact matching version of the hpijs sub-package
  to have the correct libhpip and libhpmud installed.
- Require pyxml to have the xml.parsers.expat Python module,
  see https://answers.launchpad.net/hplip/+question/25696

-------------------------------------------------------------------
Tue Feb 26 12:25:45 CET 2008 - jsmeix@suse.de

- Static "hpijs" PPD files via enable-foomatic-ppd-install
  require foomatic-rip-hplip via their cupsFilter entries
  so that enable-foomatic-rip-hplip-install is also needed.
  See https://answers.launchpad.net/hplip/+question/25654
  and see Novell/Suse Bugzilla bnc#364419.

-------------------------------------------------------------------
Thu Feb 21 14:35:36 CET 2008 - jsmeix@suse.de

- create_hal_global_fdi_from_models.dat creates the
  global HAL 70-hpmud.fdi file during build-time from the
  models.dat file (see Novell/Suse Bugzilla bnc#336658).
- Built version 2.8.2 in the traditional way with readymade
  PPD files in /usr/share/cups/model/manufacturer-PPDs/hplip/
  (i.e. without hpijs.drv and foomatic-rip-hplip)
- Updated to version 2.8.2:
  HPIJS PPD files are now created with the CUPS DDK instead of
  the foomatic database. Dynamic PPD files are now supported
  via the hpijs.drv file.
  Added foomatic-rip-hplip support. Foomatic-rip-hplip is for
  distros that do not have the latest foomatic-rip which is
  required for drv support.
  Updated the krgb patch for gpl ghostscript 8.61. 
  Updated the "hp" backend to return only hplip supported devices
  during device discovery. If the device is not in models.dat
  the "hp" backend will exclude it.
  Changed margins to 0.125 inch from 0.
  Bumped libhpmud from 0.0.1 to 0.0.2 for support_type
  in hpmud_query_model().
  Several bug fixes (no Suse bugs).
  Several more supported printers (some more ZJStream printers).
- Updated to version 2.7.12:
  Added PJL support to "hp" backend which provides in-band
  printer status.
  Bumped libhpmud from 0.0.0 to 0.0.1 for statustype support
  in hpmud_query_model().
  Several bug fixes (no Suse bugs).
  Several more supported LaserJet printers, one ZJStream printer,
  one LJm1005 printer with binary-only plugin (LaserJet M1005 MFP).

-------------------------------------------------------------------
Fri Nov  9 14:29:44 CET 2007 - jsmeix@suse.de

- Changed rchplip (i.e. /etc/init.d/hplip):
  Added "$local_fs $remote_fs $syslog" to Required-Start
  to be on the safe side and added a line "export HOME=/tmp"
  to mitigate Novell/Suse Bugzilla bnc#339443.

-------------------------------------------------------------------
Tue Oct 23 14:24:27 CEST 2007 - jsmeix@suse.de

- Updated to version 2.7.10:
  New LJZjsMono printer device class for ZJStream printers.
  ZJStream printers require JBIG which has issues
  (see Novell/Suse Bugzilla bnc#263181). Therefore the support
  for ZJStream printers is provided only via a binary-only plugin
  which is downloaded by "hp-setup" from the HP web-site only after
  the user has accepted the license terms.
  Applied patch for issue CVE-2007-5208 (hpssd command injection)
  Several bug fixes (no Suse bugs).
  Two more supported Photosmart and Officejet printers.
  For details see release_notes.html
- Updated to version 2.7.9:
  Made the default udev 55-hpmud.rules file more permissive
  (ie: MODE=0666) so that also device status works for any user.
  This looks sufficiently secure by default because the
  55-hpmud.rules matches now only for those USB product IDs
  which belong to HP printers and all-in-one devices so that
  other HP USB devices like keyboard, mouse, and mass storage
  devices won't get MODE=0666 by accident.
  All known product-ids that HPLIP/HPIJS supports have been
  added to the model.dat file.
  Many bug fixes (no Suse bugs).
  Some more supported Photosmart and Officejet printers.
  For details see release_notes.html

-------------------------------------------------------------------
Tue Sep 18 12:18:25 CEST 2007 - jsmeix@suse.de

- Add a line-feed to the end of all PPDs to fix those PPDs where
  it is missing. See Novell/Suse Bugzilla bnc#309832:
  Unix/Linux text files must end with a line-feed.
  Otherwise reading the last line results EOF and then some
  programs may ignore the last line.

-------------------------------------------------------------------
Wed Sep 12 16:17:46 CEST 2007 - jsmeix@suse.de

- Ignore cupstestppd FAILs because of errors in UIConstraints
  and/or NonUIConstraints which are detected since cupstestppd
  in CUPS > 1.2.7 (i.e. since openSUSE 10.3).
  See Novell/Suse Bugzilla bnc#309822: When this bug is fixed,
  cupstestppd would no longer result zero exit code.
  In the long run the PPDs should be fixed but as far as we know
  there have been no problems because of such UIConstraints errors
  so that it should be o.k. let those PPDs pass even if they are
  not strictly compliant.

-------------------------------------------------------------------
Tue Aug  7 11:51:36 CEST 2007 - jsmeix@suse.de

- Changed /etc/udev/rules.d/55-hpmud.rules (via a change in
  change-udev-rules.diff) from OWNER="root" GROUP="lp" MODE="0660"
  to OWNER="root" GROUP="lp" MODE="0664" (i.e. allow read
  permissions for HP USB device files for normal users).
  Reason: Without read permissions even a simple command
  like "lsusb" cannot list HP USB devices to normal users
  which could cause unnecessary confusion.
  Furthermore have only read permissions for HP USB device files
  for normal users is in compliance to the default assumptions
  in upstream HPLIP and it should be sufficiently secure because
  for retrieving data from the device a matching request must be
  sent to the device which requires write permissions.

-------------------------------------------------------------------
Thu Aug  2 12:05:18 CEST 2007 - jsmeix@suse.de

- Updated to version 2.7.7:
  Many bug fixes (no Suse bugs).
  Some more supported Photosmart printers.
  For details see release_notes.html
- fix-printing-white-spaces-and-empty-lines.diff is no longer
  needed because the bug is now fixed in the source.

-------------------------------------------------------------------
Thu Jul 26 09:15:21 CEST 2007 - jsmeix@suse.de

- Changed change-udev-rules.diff so that 55-hpmud.rules matches
  also against the new SUBSYSTEM=="usb" but keep "usb_device"
  for backward compatibility (Novell/Suse Bugzilla bnc#294161).

-------------------------------------------------------------------
Fri Jul  6 10:26:21 CEST 2007 - jsmeix@suse.de

- fix-printing-white-spaces-and-empty-lines.diff fixes printing
  white spaces and empty lines according to a mail from HP
  on the hplip-help@lists.sourceforge.net list.

-------------------------------------------------------------------
Tue Jul  3 11:54:28 CEST 2007 - jsmeix@suse.de

- Updated to version 2.7.6:
  No more start-up daemons:
  hpiod is replaced by new direct device I/O (via hpmud library),
  hpssd (for device status) still exists but is started by default
  as a daemon by the first user who needs it which is not nice
  because this results a random user which runs hpssd therefore
  we (i.e. Novell/Suse) still provide /etc/init.d/hplip which
  is used to start hpssd as before during system boot.
  Many bug fixes (no Suse bugs) and some enhancements.
  Some more supported Photosmart, Color LaserJet, and DeskJet
  printers.
  For details see release_notes.html

-------------------------------------------------------------------
Thu Jun 21 15:46:12 CEST 2007 - jsmeix@suse.de

- Added stop_on_removal to preun, insserv_cleanup to postun,
  and ldconfig to post and postun for the hpijs sub-package.

-------------------------------------------------------------------
Thu May 24 01:46:16 CEST 2007 - ro@suse.de

- Added libusb-devel to BuildRequires.

-------------------------------------------------------------------
Fri Apr 27 14:28:27 CEST 2007 - jsmeix@suse.de

- Updated to version 1.7.4a:
  Resolved a build issue that caused a couple missing files
  in the 1.7.4 release and a fix for hp-check (no Suse bugs).

-------------------------------------------------------------------
Mon Apr 23 13:50:13 CEST 2007 - jsmeix@suse.de

- Updated to version 1.7.4:
  Many bug fixes (no Suse bugs).
  Some more supported DeskJet printers.
  For details see release_notes.html

-------------------------------------------------------------------
Mon Mar 26 08:53:51 CEST 2007 - jsmeix@suse.de

- Updated to version 1.7.3:
  Many bug fixes (no Suse bugs).
  No new supported models but enhancements for some models.
  For details see release_notes.html

-------------------------------------------------------------------
Thu Mar  1 13:34:43 CET 2007 - jsmeix@suse.de

- Updated to version 1.7.2:
  Several more supported Officejet Pro devices.
  New OJProKx50 device class (derived from DJGenericVIP).
  Major hp-toolbox upgrade/redesign.
  Many bug fixes (no Suse bugs).
  fix-buffer-overflow.patch and hplip-1.7.1-1.patch are no longer
  needed because the bugs are now fixed in the sources.

-------------------------------------------------------------------
Fri Feb 16 11:52:28 CET 2007 - jsmeix@suse.de

- Added a fix for fat.c to fix-buffer-overflow.patch
  to aviod access when array subscript is above array bounds
  (Suse Bugzilla bnc#243047).
- Remove all byte-compiled Python .pyc (and perhaps .pyo)
  files which are created at run-time in /usr/share/hplip/
  via preun script (Suse Bugzilla bnc#244451).

-------------------------------------------------------------------
Mon Feb  5 14:24:24 CET 2007 - jsmeix@suse.de

- fix-buffer-overflow.patch fixes a too small string buffer
  which overflows in line 310 in ljcolor.cpp.
- Moved the hpijs man page to the hplip-hpijs sub-package
  so that there is no same file in hplip and hpijs-standalone
  (hplip-hpijs and hpijs-standalone conflict with each other).

-------------------------------------------------------------------
Thu Feb  1 15:02:59 CET 2007 - jsmeix@suse.de

- hplip-1.7.1-1.patch from HP fixes Deskjet D4100/D4160
  christmas-tree (firmware hangs up with flashing LEDs)
  on second print job.
- Removed /usr/bin/hpijs.without-libcups from hplip-hpijs
  to get rid of confusing RPM package requirements (hplip-hpijs
  requires cups-libs because of /usr/bin/hpijs).
- Created new package hpijs-standalone and hpijs-standalone.spec
  for a special version of /usr/bin/hpijs which neither needs
  a HPLIP library nor a CUPS library to run it.

-------------------------------------------------------------------
Wed Jan 31 13:50:12 CET 2007 - jsmeix@suse.de

- Removed explicite fstack-protector-all from CFLAGS and CXXFLAGS
  because fstack-protector will be enabled by default.

-------------------------------------------------------------------
Mon Jan 29 15:40:16 CET 2007 - jsmeix@suse.de

- Package 'sane' was renamed to 'sane-backends'.
  Adapted it so that it works with 'sane-backends'.

-------------------------------------------------------------------
Thu Jan 25 14:53:05 CET 2007 - jsmeix@suse.de

- Updated to version 1.7.1:
  Many bug fixes (no Suse bugs).
  No new supported models but enhancements for several models.
  For details see release_notes.html
- Removed the fix for uninitialized file pointer in api/model.c
  from fix-uninitialized-variables.diff because it is now
  fixed in the sources.

-------------------------------------------------------------------
Fri Jan 19 16:01:20 CET 2007 - jsmeix@suse.de

- Added fix for uninitialized file pointer in api/model.c to
  fix-uninitialized-variables.diff (Suse Bugzilla bnc#236709).

-------------------------------------------------------------------
Fri Jan 12 15:13:35 CET 2007 - jsmeix@suse.de

- Since version 1.6.12 /usr/bin/hpijs is linked with libcups
  so that the package hplip-hpijs could be no longer installed
  without at least the package cups-libs. Therefore an additional
  special /usr/bin/hpijs.without-libcups is built which does not
  require the CUPS library.

-------------------------------------------------------------------
Wed Dec 20 14:45:25 CET 2006 - jsmeix@suse.de

- Updated to version 1.6.12:
  Three more supported LaserJet printers.
  Many bug fixes (no Suse bugs).
  For details see release_notes.html
  Added SANE_DEBUG_HPAIO support for the hpaio SANE backend.
  The new models.dat file replaces the .xml files. The hplip_api
  can be used to get model attributes without running the HPLIP
  daemons. See hplip_api.h for reference (this affects the Suse
  Bugzilla bugs bnc#184798 and bnc#184824).
- Fixed hp-toolbox.wrapper to catch 'error' regardless of the case
  (see Suse Bugzilla bnc#229620).

-------------------------------------------------------------------
Tue Oct 17 09:59:50 CEST 2006 - jsmeix@suse.de

- Updated to version 1.6.10:
  Several more supported LaserJet printers.
  Many bug fixes (no Suse bugs).
- Fixed typo in keyword in some LaserJet PPDs
  ("* PageRegion" -> "*PageRegion").

-------------------------------------------------------------------
Mon Sep 18 11:02:03 CEST 2006 - jsmeix@suse.de

- Updated to version 1.6.9:
  Added support CD/DVD label printing (ie: PS D5100).
  Several more supported Photosmart printers.
  Many bug fixes (no Suse bugs).

-------------------------------------------------------------------
Mon Sep 11 12:14:32 CEST 2006 - jsmeix@suse.de

- Using generalised cupsext* and pcardext* in the files section
  (instead of explicit only cupsext.so and pcardext.so)
  so that it works now both for Python 2.4 and 2.5
  (the latter installs additional *.egg-info files).
 
-------------------------------------------------------------------
Mon Sep  4 12:00:12 CEST 2006 - jsmeix@suse.de

- Exchanged the hard RPM requirement for ghostscript_any by a
  supplements entry for hplip-hpijs so that there is no longer
  a mutual (cyclic) hard RPM dependency between hplip-hpijs
  and ghostscript-library.

-------------------------------------------------------------------
Thu Aug  3 11:37:07 CEST 2006 - jsmeix@suse.de

- Updated to version 1.6.7:
  Changed from dynamic IP ports to static IANA IP ports
  for hpiod (2208) and hpssd (2207).
  Two more supported Photosmart printers.
  Several bug fixes (no Suse bugs).

-------------------------------------------------------------------
Mon Jul 17 13:52:36 CEST 2006 - jsmeix@suse.de

- Fixed PPDs which contain "1284DeviceId" which must be
  "1284DeviceID" (detected by new CUPS 1.2 cupstestppd).

-------------------------------------------------------------------
Wed Jun 28 14:47:47 CEST 2006 - jsmeix@suse.de

- Updated to maintenance release 1.6.6a:
  This provides various minor fixes and enhancements.
  For details see doc/release_notes.html in the source
  or /usr/share/doc/packages/hplip/release_notes.html

-------------------------------------------------------------------
Mon Jun 19 13:46:28 CEST 2006 - jsmeix@suse.de

- Updated to version 1.6.6:
  HPLIP has reached 1.0 status.
  With this release a date encoded revision number x.y.m is used:
  x = major release number, y = year (6=2006), m = month (6=June)
  Correct URLs in HTML docs (obsoletes fix-doc-hrefs.diff).
  Removed DeviceOpen from hp backend. This fixes two problems:
  1) usblp will no longer be removed for device discovery
  2) device discovery will no longer cause Inkjets to power-up.
  Added hpaio.desc file for SANE.
  Several more supported printers.
- Cleaned up build (simplified spec file):
  Changed install dir for PPDs and doc in Makefile.am.
  Using configure without rpm-install.
  Using configure with --disable-cups-install.
  Links to work around inconsistent naming of python scripts
  and links to hpfax backend and its associated PPD file
  are no longer needed.

-------------------------------------------------------------------
Fri Jun  9 12:19:59 CEST 2006 - jsmeix@suse.de

- Added man page for /usr/bin/hpijs (hpijs.1.gz).
- Fixed wrong URLs in HTML documentation (fix-doc-hrefs.diff).
- Added links to work around inconsistent naming of python scripts.
- Added links to hpfax backend and its associated PPD file
  to make them available as usual for CUPS setup tools.

-------------------------------------------------------------------
Mon May 22 14:04:20 CEST 2006 - jsmeix@suse.de

- Fixed typo (missing '"') in hplip-init-script.diff

-------------------------------------------------------------------
Fri May 19 13:04:46 CEST 2006 - jsmeix@suse.de

- Updated to version 0.9.11:
  Revised and updated documentation.
  Some more supported all-in-one devices and printers.
  Several bug fixes (no Suse bugs).
- Updated to version 0.9.10:
  Several bug fixes (no Suse bugs).
- Updated to version 0.9.9:
  Uses libusb for all USB I/O.
  CUPS USB DeviceURIs must be changed from
  "hp:/hp_model?device=/dev/usb/lpX" (no longer supported)
  to "hp:/hp_model?serial=xxxxxxxx".
  One more supported all-in-one device.
  Several bug fixes (no Suse bugs).
- Updated to version 0.9.8:
  New PC send fax support via special CUPS backend (hpfax)
  and special HP-Fax-hplip.ppd PPD file
  and a new send fax UI (hp-sendfax).
  Some more supported printers.
  Several bug fixes (no Suse bugs).

-------------------------------------------------------------------
Wed Apr 26 12:11:00 CEST 2006 - jsmeix@suse.de

- Fixed PPDs for "LaserJet 5Si" and "LaserJet 5MP"
  (see Suse Bugzilla bnc#164991).

-------------------------------------------------------------------
Fri Feb 24 14:11:01 CET 2006 - jsmeix@suse.de

- Fixed an array index underflow (for LJ1010, LJ1012)
  in ljfastraster.cpp (Suse Bugzilla bnc#152720).

-------------------------------------------------------------------
Wed Jan 25 21:36:29 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Thu Jan 12 11:13:05 CET 2006 - jsmeix@suse.de

- Set compiler flag "-fstack-protector-all" to build it with
  "Stack Protector" via a so called "canary" (requires gcc >= 4.1)

-------------------------------------------------------------------
Wed Jan  4 16:08:08 CET 2006 - jsmeix@suse.de

- Moved /usr/lib[64]/libhpip.* library files to the hplip-hpijs
  sub-package because /usr/bin/hpijs requires libhpip but for
  special cases (e.g. for a minimal printing system) it should
  be possible to use only HPIJS without the rest of HPLIP.

-------------------------------------------------------------------
Tue Jan  3 14:52:07 CET 2006 - jsmeix@suse.de

- Updated to version 0.9.7
  including the additional hplip-0.9.7-2.patch from HP.

-------------------------------------------------------------------
Thu Dec 22 15:29:13 CET 2005 - ro@suse.de

- requires: PyQt -> python-qt

-------------------------------------------------------------------
Thu Dec  1 16:01:58 CET 2005 - jsmeix@suse.de

- Removed unneeded KDE packages from "neededforbuild" since
  the new package python-qt was split from kdebindings3-python
  (see Suse Bugzilla bnc#135250).

-------------------------------------------------------------------
Mon Nov 28 11:30:30 CET 2005 - jsmeix@suse.de

- Replaced requirement for the package kdebindings3-python
  by a generic requirement for the RPM capability PyQt
  to avoid needless dependencies to KDE libraries
  (see Suse Bugzilla bnc#135250).

-------------------------------------------------------------------
Tue Nov 22 12:31:52 CET 2005 - jsmeix@suse.de

- Added -fno-strict-aliasing to the CXXFLAGS to avoid problems
  in ljfastraster.cpp (line 1213) and hpijs.cpp (lines 86, 223).

-------------------------------------------------------------------
Fri Nov 18 15:55:05 CET 2005 - jsmeix@suse.de

- Updated to version 0.9.6

-------------------------------------------------------------------
Wed Sep 21 16:58:51 CEST 2005 - jsmeix@suse.de

- Updated to version 0.9.5
  including the additional hplip-0.9.5-3.patch from HP.

-------------------------------------------------------------------
Mon Sep 12 14:02:17 CEST 2005 - jsmeix@suse.de

- Several PPDs contain "600x600x2dpi" which is not allowed
  according to the Adobe PPD specification section 5.9
  and which is therefore simply replaced by "600x1200dpi"
  (see Suse Bugzilla bnc#116393).

-------------------------------------------------------------------
Mon Aug 29 17:09:07 CEST 2005 - jsmeix@suse.de

- Removed a non-working PPD.
- Fix "... is used uninitialized ..." warning.

-------------------------------------------------------------------
Tue Jul 26 17:33:13 CEST 2005 - jsmeix@suse.de

- Updated to version 0.9.4
- Removed obsolete fixes for missing class prototypes.
- Removed obsolete fixes for HP_Business_Inkjet_3000.ppd
- Added a fix for condrestart in /etc/init.d/hplip

-------------------------------------------------------------------
Tue May 31 17:07:13 CEST 2005 - jsmeix@suse.de

- Updated to version 0.9.3

-------------------------------------------------------------------
Tue May 24 10:48:26 CEST 2005 - jsmeix@suse.de

- Fixed missing class prototypes, otherwise it fails with
  "error: ISO C++ forbids declaration of 'xxx' with no type".

-------------------------------------------------------------------
Tue May 17 14:10:49 CEST 2005 - jsmeix@suse.de

- Fix "... is used uninitialized ..." warnings.

-------------------------------------------------------------------
Wed May  4 12:14:09 CEST 2005 - jsmeix@suse.de

- Updated to version 0.9.2 which does no longer need
  the "fix C" (i.e. hplip-0.8.8.diff) from below.

-------------------------------------------------------------------
Sun Apr 10 12:13:29 CEST 2005 - coolo@suse.de

- fix C

-------------------------------------------------------------------
Tue Mar 22 11:59:00 CET 2005 - jsmeix@suse.de

- Added PreReq.

-------------------------------------------------------------------
Thu Mar 17 10:53:11 CET 2005 - jsmeix@suse.de

- Fixed a bug in HP-DeskJet_3740-hpijs.ppd.gz:
  According to hpijs_readme.html the DeskJet 3740 belongs to the
  DJ3320 device class.

-------------------------------------------------------------------
Tue Mar  8 11:59:09 CET 2005 - jsmeix@suse.de

- Added %suse_update_desktop_file stuff for hp-toolbox.
- Moved %{_libdir}/libsane-hpaio.* to %{_libdir}/sane/
  instead of creating symlinks (see Tue Mar 1 11:15:33).

-------------------------------------------------------------------
Tue Mar  1 11:15:33 CET 2005 - jsmeix@suse.de

- Added python-xml to RPM requirements because otherwise
  hpssd (i.e. /usr/share/hplip/hpssd.py) doesn't work.
- Create symlinks (via '%triggerin -- sane') to all
  %{_libdir}/libsane-hpaio.* so that SANE will find them.
- Added kdebindings3-python to RPM requirements because otherwise
  hp-toolbox (i.e. /usr/share/hplip/toolbox) doesn't work.

-------------------------------------------------------------------
Tue Feb 22 10:48:35 CET 2005 - jsmeix@suse.de

- Changed default media size from Letter to A4
  if this is an available choice in the PPD.

-------------------------------------------------------------------
Tue Feb 15 16:57:52 CET 2005 - jsmeix@suse.de

- Updated to version 0.8.8, for details see ChangeLog and
  http://hpinkjet.sourceforge.net/updates.php
- Removed the "compatibility"-links because they are not needed.
- Fixed basic stuff in the init script (needs further improvement).
- Source should be x86_64 clean (SUSE patch no longer needed).

-------------------------------------------------------------------
Tue Feb  1 17:06:20 CET 2005 - jsmeix@suse.de

- Updated to version 0.8.7, for details see ChangeLog and 
  http://hpinkjet.sourceforge.net/updates.php
- Added triggerin and postun scripts to add and remove
  the SANE backend "hpaio" in /etc/sane.d/dll.conf
- Replaced hplip-0.8.4-models.xml.diff by
  hplip-0.8.7-models.xml.diff because the "HP LaserJet 1220"
  is now in the models.xml file but the entry is buggy.

-------------------------------------------------------------------
Tue Jan 25 15:40:55 CET 2005 - jsmeix@suse.de

- Branched the sub-package hplip-hpijs which contains only
  the plain HPIJS binary so that Ghostscript can require
  only this sub-package (without all the other stuff).
- Added a link to the toolbox program to have it accessible
  via the user's PATH.
- Added the usual 'rc'-link to the runlevel script.
- Added the following RPM requirements regarding printing:
  hplip requires hplip-hpijs and foomatic-filters
  hplip-hpijs requires ghostscript_any
  (There are no RPM requirements regarding scanning because
   HPLIP will be also used for plain printers.)
- Exchanged the destructive line for the cupsd in the runlevel script
  because cupsd runs as user lp and dies in case of a SIGHUP.

-------------------------------------------------------------------
Tue Jan 18 14:36:29 CET 2005 - jsmeix@suse.de

- patch hplip-0.8.4-models.xml.diff adds the "HP LaserJet 1220"
  to the list of known models of the SANE backend "hpaio"

-------------------------------------------------------------------
Wed Jan 12 11:23:00 CET 2005 - sf@suse.de

- add --libdir=%_libdir to build on multilib archs
- add patch for cups search path for backends

-------------------------------------------------------------------
Thu Dec  2 12:21:55 CET 2004 - jsmeix@suse.de

- initial version

Places

File hplip.changes of Package hplip (Revision 20471f73fc489a461861cc37b2efc114)

Places